DNA packaging steps in bacteriophage lambda head assembly

Good cop, bad cop: Polyamines play both sides in host immunity and viral replication

Viruses rely on host cells for energy and synthesis machinery required for genome replication and particle assembly. Due to the dependence of viruses on host cells, viruses have evolved multiple mechanisms by which they can induce metabolic changes in the host cell to suit their specific requirements. The host immune response also involves metabolic changes to be able to react to viral insult. Polyamines are small ubiquitously expressed polycations, and their metabolism is critical for viral replication and an adequate host immune response. This is due to the variety of functions that polyamines have, ranging from condensing DNA to enhancing the translation of polyproline-containing proteins through the hypusination of eIF5A. Here, we review the diverse mechanisms by which viruses exploit polyamines, as well as the mechanisms by which immune cells utilize polyamines for their functions. Furthermore, we highlight potential avenues for further study of the host-virus interface.

Structural basis of DNA packaging by a ring-type ATPase from an archetypal viral system

Many essential cellular processes rely on substrate rotation or translocation by a multi-subunit, ring-type NTPase. A large number of double-stranded DNA viruses, including tailed bacteriophages and herpes viruses, use a homomeric ring ATPase to processively translocate viral genomic DNA into procapsids during assembly. Our current understanding of viral DNA packaging comes from three archetypal bacteriophage systems: cos, pac and phi29. Detailed mechanistic understanding exists for pac and phi29, but not for cos. Here, we reconstituted in vitro a cos packaging system based on bacteriophage HK97 and provided a detailed biochemical and structural description. We used a photobleaching-based, single-molecule assay to determine the stoichiometry of the DNA-translocating ATPase large terminase. Crystal structures of the large terminase and DNA-recruiting small terminase, a first for a biochemically defined cos system, reveal mechanistic similarities between cos and pac systems. At the same time, mutational and biochemical analyses indicate a new regulatory mechanism for ATPase multimerization and coordination in the HK97 system. This work therefore establishes a framework for studying the evolutionary relationships between ATP-dependent DNA translocation machineries in double-stranded DNA viruses.

Architect of Virus Assembly: the Portal Protein Nucleates Procapsid Assembly in Bacteriophage P22

Tailed double-stranded DNA (dsDNA) bacteriophages, herpesviruses, and adenoviruses package their genetic material into a precursor capsid through a dodecameric ring complex called the portal protein, which is located at a unique 5-fold vertex. In several phages and viruses, including T4, Φ29, and herpes simplex virus 1 (HSV-1), the portal forms a nucleation complex with scaffolding proteins (SPs) to initiate procapsid (PC) assembly, thereby ensuring incorporation of only one portal ring per capsid. However, for bacteriophage P22, the role of its portal protein in initiation of procapsid assembly is unclear. We have developed an in vitro P22 assembly assay where portal protein is coassembled into procapsid-like particles (PLPs). Scaffolding protein also catalyzes oligomerization of monomeric portal protein into dodecameric rings, possibly forming a scaffolding protein-portal protein nucleation complex that results in one portal ring per P22 procapsid. Here, we present evidence substantiating that the P22 portal protein, similarly to those of other dsDNA viruses, can act as an assembly nucleator. The presence of the P22 portal protein is shown to increase the rate of particle assembly and contribute to proper morphology of the assembled particles. Our results highlight a key function of portal protein as an assembly initiator, a feature that is likely conserved among these classes of dsDNA viruses.IMPORTANCE The existence of a single portal ring is essential to the formation of infectious virions in the tailed double-stranded DNA (dsDNA) phages, herpesviruses, and adenoviruses and, as such, is a viable antiviral therapeutic target. How only one portal is selectively incorporated at a unique vertex is unclear. In many dsDNA viruses and phages, the portal protein acts as an assembly nucleator. However, early work on phage P22 assembly in vivo indicated that the portal protein did not function as a nucleator for procapsid (PC) assembly, leading to the suggestion that P22 uses a unique mechanism for portal incorporation. Here, we show that portal protein nucleates assembly of P22 procapsid-like particles (PLPs). Addition of portal rings to an assembly reaction increases the rate of formation and yield of particles and corrects improper particle morphology. Our data suggest that procapsid assembly may universally initiate with a nucleation complex composed minimally of portal and scaffolding proteins (SPs).

A viral scaffolding protein triggers portal ring oligomerization and incorporation during procapsid assembly

Most double-stranded DNA viruses package genetic material into empty precursor capsids (or procapsids) through a dodecameric portal protein complex that occupies 1 of the 12 vertices of the icosahedral lattice. Inhibiting incorporation of the portal complex prevents the formation of infectious virions, making this step an excellent target for antiviral drugs. The mechanism by which a sole portal assembly is selectively incorporated at the special vertex is unclear. We recently showed that, as part of the DNA packaging process for bacteriophage P22, the dodecameric procapsid portal changes conformation to a mature virion state. We report that preformed dodecameric rings of P22 portal protein, as opposed to portal monomers, incorporate into nascent procapsids, with preference for the procapsid portal conformation. Finally, a novel role for P22 scaffolding protein in triggering portal ring formation from portal monomers is elucidated and validated by incorporating de novo assembled portal rings into procapsids.

Bacteriophage lambda: Early pioneer and still relevant

Molecular genetic research on bacteriophage lambda carried out during its golden age from the mid-1950s to mid-1980s was critically important in the attainment of our current understanding of the sophisticated and complex mechanisms by which the expression of genes is controlled, of DNA virus assembly and of the molecular nature of lysogeny. The development of molecular cloning techniques, ironically instigated largely by phage lambda researchers, allowed many phage workers to switch their efforts to other biological systems. Nonetheless, since that time the ongoing study of lambda and its relatives has continued to give important new insights. In this review we give some relevant early history and describe recent developments in understanding the molecular biology of lambda's life cycle.

Dualities in the analysis of phage DNA packaging motors

The DNA packaging motors of double-stranded DNA phages are models for analysis of all multi-molecular motors and for analysis of several fundamental aspects of biology, including early evolution, relationship of in vivo to in vitro biochemistry and targets for anti-virals. Work on phage DNA packaging motors both has produced and is producing dualities in the interpretation of data obtained by use of both traditional techniques and the more recently developed procedures of single-molecule analysis. The dualities include (1) reductive vs. accretive evolution, (2) rotation vs. stasis of sub-assemblies of the motor, (3) thermal ratcheting vs. power stroking in generating force, (4) complete motor vs. spark plug role for the packaging ATPase, (5) use of previously isolated vs. new intermediates for analysis of the intermediate states of the motor and (6) a motor with one cycle vs. a motor with two cycles. We provide background for these dualities, some of which are under-emphasized in the literature. We suggest directions for future research.

The DNA-packaging nanomotor of tailed bacteriophages

Tailed bacteriophages use nanomotors, or molecular machines that convert chemical energy into physical movement of molecules, to insert their double-stranded DNA genomes into virus particles. These viral nanomotors are powered by ATP hydrolysis and pump the DNA into a preformed protein container called a procapsid. As a result, the virions contain very highly compacted chromosomes. Here, I review recent progress in obtaining structural information for virions, procapsids and the individual motor protein components, and discuss single-molecule in vitro packaging reactions, which have yielded important new information about the mechanism by which these powerful molecular machines translocate DNA.

A microbial genetic journey

Fortunately, I began research in 1950 when the basic concepts of microbial genetics could be explored experimentally. I began with bacteriophage lambda and tried to establish the colinearity of its linkage map with its DNA molecule. My students and I worked out the regulation of lambda repressor synthesis for the establishment and maintenance of lysogeny. We also investigated the proteins responsible for assembly of the phage head. Using cell extracts, we discovered how to package DNA inside the head in vitro. Around 1972, I began to use molecular genetics to understand the developmental biology of Myxococcus xanthus. In particular, I wanted to learn how myxococcus builds its multicellular fruiting body within which it differentiates spores. We identified two cell-to-cell signals used to coordinate development. We have elucidated, in part, the signal transduction pathway for C-signal that directs the morphogenesis of a fruiting body.

The product of the bacteriophage lambda W gene: purification and properties

Gene W is one of the 10 genes that control the morphogenesis of the bacteriophage lambda head. The morpho genesis of the phage lambda head proceeds through the synthesis of an intermediate assembly called the prohead. This is an empty shell into which the bacteriophage DNA is introduced--packaged--by the phage enzyme DNA terminase. The product of W (gpW) acts after DNA packaging, but before the addition of another phage product, gene product FII, and before the addition of tails. The role of gpW is unknown. The structure of N- and C-tagged gpW has been previously determined by nuclear magnetic resonance (NMR) spectroscopy. Here we report some of the properties of the native protein. The purification of gpW to homogeneity, overproduced by a plasmid derivative, is described. To obtain large amounts of the protein, the ribosome-binding site had to be modified, showing that inefficient translation of the message is the main mechanism limiting W gene expression. The molecular weight of the protein is in close agreement to the value predicted from the DNA sequence of the gene, which suggests that it is not post-transcriptionally modified. It behaves as a monomer in solution. Radioactively labeled gpW is incorporated into phage particles in in vitro complementation, showing that gpW is a structural protein. The stage at which gpW functions and other circumstantial evidence support the idea that six molecules of gpW polymerize on the connector before the incorporation of six molecules of gpFII and before the tail attaches.

A simple mathematical formula for stoichiometry quantification of viral and nanobiological assemblage using slopes of log/log plot curves

In nanotechnology, biomolecular assemblies serve not only as model systems for the construction of nanodevices, but they can also be used directly as templates for the formation of nanostructures. Biological nano-building blocks can either be isolated as complete functional units from living cells or viruses (biological "Top down" approach) or formed by biomolecular assembly from recombinant or synthetic components ("Bottom up" approach). In both cases, rational design of nanostructures requires knowledge of the stoichiometry of the biological structures, which frequently occur as multimers, i.e., the morphological complex is composed of multiple copies of one or more macromolecules. In this paper, a method is described for the stoichiometric quantification of molecules in bio-nanostructures. The method is based on using dilution factors and relative concentrations rather than absolute quantities, which are often difficult to determine, especially in short-lived assembly intermediates. The approach exploits the fact that the larger the stoichiometry of the component is, the more dramatic is the influence of the dilution factor (decrease in concentration) on the reaction. We established and used the method to determine the stoichiometry of components of bacterial virus phi29. The log of dilution factors was plotted against the log of reaction yield. The stoichiometry Z was determined with the equation Z=-1.58+2.4193T-0.001746T(2) [T in (0,1000), or 90 degree angle alpha in (0 degrees, 89.9 degrees )], where T is the slope of the curve (tangent of 90 degree angle alpha, which is the angle between the x-axis and the concentration dependent curve). Z can also be determined from a standard table given in this report. With the bacteriophage phi29 in vitro assembly system, up to 5x10(8) infectious virions per ml can be assembled from 11 purified components, giving our method a sensitivity of nine orders of magnitude. We confirmed the stoichiometries of phi29 components that were determined previously with microscopic approaches. The described method also responded to programmed stoichiometry changes, which were generated by assembling the phi29 DNA packaging motor from modified pRNA (DNA-packaging RNA) molecules forming a trimer of dimers or a dimer of trimers, instead of the wild-type hexamer.

Bacteriophage p22 portal vertex formation in vivo

Bacteriophage with double-stranded, linear DNA genomes package DNA into pre-assembled icosahedral procapsids through a unique vertex. The packaging vertex contains an oligomeric ring of a portal protein that serves as a recognition site for the packaging enzymes, a conduit for DNA translocation, and the site of tail attachment. Previous studies have suggested that the portal protein of bacteriophage P22 is not essential for shell assembly; however, when assembled in the absence of functional portal protein, the assembled heads are not active in vitro packaging assays. In terms of head assembly, this raises an interesting question: how are portal vertices defined during morphogenesis if their incorporation is not a requirement for head assembly? To address this, the P22 portal gene was cloned into an inducible expression vector and transformed into the P22 host Salmonella typhimurium to allow control of the dosage of portal protein during infections. Using pulse-chase radiolabeling, it was determined that the portal protein is recruited into virion during head assembly. Surprisingly, over-expression of the portal protein during wild-type P22 infection caused a dramatic reduction in the yield of infectious virus. The cause of this reduction was traced to two potentially related phenomena. First, excess portal protein caused aberrant head assembly resulting in the formation of T=7 procapsid-like particles (PLPs) with twice the normal amount of portal protein. Second, maturation of the PLPs was blocked during DNA packaging resulting in the accumulation of empty PLPs within the host. In addition to PLPs with normal morphology, smaller heads (apparently T=4) and aberrant spirals were also produced. Interestingly, maturation of the small heads was relatively efficient resulting in the formation of small mature particles that were tailed and contained a head full of DNA. These data suggest that incorporation of portal vertices into heads occurs during growth of the coat lattice at decision points that dictate head assembly fidelity.

To fuse or not to fuse: the effects of electrostatic interactions, hydrophobic forces, and structural amphiphilicity on protein-mediated membrane destabilization

The development of lipid-based delivery vehicles for therapeutic molecules has become a topic of intense research. Recently, much of this effort has been directed towards mimicking the characteristics of viruses that give them an advantage for the delivery of genetic medicines. One of the most desirable properties of viral-based vectors is the ability to promote the destabilization of the host cell membrane to allow the entry of the genetic medicine into the target cell. This has been found to be largely controlled by the coat proteins on the surface of enveloped viruses. Although the exact mechanism by which proteins involved in the fusion process are able to promote the destabilization of membranes has yet to be elucidated, much understanding based upon information gained from a wide variety of studies is advancing the state of knowledge in this area. Parameters such as hydrophobic and electrostatic interactions as well as structural amphiphilicity, control to a large extent, the nature of the interaction of proteins with membranes. Thus, membrane fusion is mediated primarily by these forces acting in concert with one another. Ultimately, the knowledge gained from these studies will help to develop the ideal delivery system for the next generation of therapeutics.

Electron microscopic studies on intracellular phage development--history and perspectives

This review is centered on the applications of thin sections to the study of intracellular precursors of bacteriophage heads. Results obtained with other preparation methods are included in so far as they are essential for the comprehension of the biological problems. This type of work was pioneered with phage T4, which contributed much to today's understanding of morphogenesis and form determination. The T4 story is rich in successes, but also in many fallacies. Due to its large size, T4 is obviously prone to preparation artefacts such as emptying, flattening and others. Many of these artefacts were first encountered in T4. Artefacts are mostly found in lysates, however, experience shows that they are not completely absent from thin sections. This can be explained by the fact that permeability changes induced by fixatives occur. The information gained from T4 was profitably used for the study of other phages. They are included in this review as far as electron microscopic studies played a major role in the elucidation of their morphogenetic pathways. Research on phage assembly pathways and form determination is a beautiful illustration for the power of the integrated approach which combines electron microscopy with biochemistry, genetics and biophysics. As a consequence, we did not restrict ourselves to the review of electron microscopic work but tried to integrate pertinent data which contribute to the understanding of the molecular mechanisms acting in determining the form of supramolecular structures.

In vitro maturation and encapsidation of the DNA of transposable Mu-like phage D108

Mu and D108 are related, temperate, transposable coliphages with unusual modes of DNA replication (transposition) and virion DNA maturation. These double-stranded DNA genomes replicate intrachromosomally and are matured and encapsidated linked to DNA sequences flanking the dispersed, integrated phage genomes. We have developed an in vitro system that employs crude lysates prepared from cells late in the Mu lytic cycle and that is proficient for both maturation and encapsidation of D108 DNA. Different forms of phage DNA were packaged at different efficiencies, with a circular pSC101::D108cts10 plasmid being most efficient, linearized plasmid less so, and mature virion DNA a poor substrate. The addition of purified D108 Ner protein to the reaction had no effect, whereas D108 repressor (c protein) inhibited the reaction. Escherichia coli integration host factor and D108 transposase proteins exerted an inhibitory effect on circular DNA substrates but had little effect on linear DNA packaging. This in vitro system, coupled with that developed for transposition, can now be used to biochemically dissect the protein and substrate requirements of these phages' DNA maturation pathway and the nature of the molecular switch between DNA transposition and encapsidation.

Late stages in bacteriophage lambda head morphogenesis: in vitro studies on the action of the bacteriophage lambda D-gene and W-gene products

The in vitro maturation of bacteriophage lambda can be divided into discrete steps. Concatemers of lambda DNA bind terminase to form complex I. This DNA-terminase complex then binds a prohead to form a ternary complex (II). Complex II in turn can be converted to infectious phage by the addition of extracts containing the products of the phage genes D, W, FII, as well as phage tails. By using in vitro complementation assays gpD and gpW have been partially purified and their interactions with complex II studied. gpD can bind to complex II in vitro to form a new complex (III) which can be isolated by sedimentation on neutral sucrose gradients. This complex requires only the addition of gpW, gpFII, and phage tails to form mature phage particles. The sedimentation of complex III is virtually identical to that of complex II; however, the resistance of the former to inactivation by DNase is higher, likely due to the partial packaging of the DNA. In similar experiments it was shown that gpW cannot bind to complex II but can effectively interact with complex III. This latter reaction converts complex III to a DNase-resistant form which sediments in a manner identical to that of full phage heads (complex IV). After isolation of the complex IV only gpFII and tails are required for mature phage formation in vitro. gpW is a heat-stable protein of molecular weight approximately 10,000.

Recognition and cleavage of the bacteriophage P1 packaging site (pac). II. Functional limits of pac and location of pac cleavage termini

Bacteriophage P1 initiates the processive packaging of its DNA at a unique site called pac. We show that a functional pac site is contained within a 161 base-pair segment of P1 EcoRI fragment 20. It extends from a position 71 base-pairs to a position 232 base-pairs from the EcoRI-22 proximal side of that fragment. The 3' and 5' pac termini are located centrally within that 161 base-pair region and are distributed over about a turn of the DNA helix. The DNA sequence of the terminus region is shown below, with the large arrows indicating the positions of termini that are frequently represented in the PI population and the small arrows indicating the positions of termini that are rarely represented in the P1 population. (Sequence: in text). Digestion of P1 virus DNA with EcoRI generates two major EcoRI-pac fragments, which differ in size by about five or six base-pairs. While the structure and position of the double-stranded pac ends of these fragments have not been determined precisely, the 5' termini at those ends probably correspond to the two major pac cleavage sites in the upper strand of the sequences shown above. The 161 base-pair pac site contains the hexanucleotide sequence 5'-TGATCAG-3' repeated four times at one end and three times at the other. Removal of just one of those elements from either the right or left ends of pac reduces pac cleavage by about tenfold. Moreover, the elements appear to be additive in their effect on pac cleavage, as removal of one and a half elements or all three elements from the right side of pac reduces pac cleavage 100-fold, and greater than 1000-fold, respectively.

Processive action of terminase during sequential packaging of bacteriophage lambda chromosomes

Bacteriophage lambda chromosomes are packaged in a polarized, sequential fashion from a multimeric DNA substrate. Mature chromosomes are generated when terminase introduces staggered nicks in the cohesive end sites (cos sites) bounding a chromosome. Packaging is polarized, to the initial and terminal cos sites for packaging a chromosome can be defined. To initiate packaging, terminase binds to cos at cosB, and subsequently cuts at cosN. To terminate packaging of a chromosome, a functional cosB is not required at the terminal cos. To explain this finding, it was proposed earlier that terminase scans for the terminal cosN, rather than any subsequent cosB, during packaging. In the work described here we performed helper packaging experiments to see whether processive action of terminase occurs during sequential packaging of lambda chromosomes. The helper packaging experiments involve trilysogens; strains carrying three prophages in tandem. Infection by a hetero-immune helper phage results in packaging of the repressed prophage chromosomes, since the prophage structure is analogous to the normal DNA substrate. Two chromosomes can be packaged from between the three cos sites of the prophages of a trilysogen. Both chromosomes are packaged even when the central cos is cosB-. Our interpretation of these data is that terminase is brought to the central cos by packaging; following cleavage of the central cos, the terminase remains bound to the distal chromosome; and terminase acts to begin packaging of the distal chromosome. The frequency at which terminase reads across the central cos to initiate packaging of the distal chromosome is in the range from 0.3 to 0.5 in our experiments. Reading across cos was found not to be greatly dependent on the state of cosB, indicating that cosB binding is only needed for packaging the first chromosome in a packaging series. A multilysogen was constructed in which the initial cos was cos+ and the distal cos sites were all cosB-. The initial and downstream chromosomes were found to be packaged. This result indicates that terminase that is brought to the central cos by packaging is not only able to initiate packaging of a downstream chromosome, but can also scan and terminate packaging of the downstream chromosome. A model is presented in which processive action of terminase is the basis for sequential packaging of lambda chromosomes.

A model of lambda DNA arrangement in the viral particle

The icosahedral shape of the lambda head suggests a 12-subunit structure of the collapsed DNA inside. The internal space of an icosahedron can optimally be filled by 12 geometrical figures each of which is a combination of a cone and more than half of a sphere. Such a pear-like geometrical figure is, in fact, formed spontaneously by DNA collapsed under certain conditions in vitro (Eickbush & Moudrianakis, 1978). It is proposed that a pear-like structure formed by about 4000 bp is the fundamental structural subunit of packaged lambda DNA. A possible arrangement of the 12 subunits inside the phage head relative to the tail is discussed. We hypothesize that lambda DNA is packaged into proheads in its condensed form. A driving force promoting the DNA translocation could be an ATP-dependent activity of a DNA topoisomerase (gpA/gpNu1), which would induce further reduction in the linking number of the already strongly negatively supercoiled DNA by rotation of one DNA strand around the other. The additional strain accumulated at the end of DNA molecule bound by the topoisomerase beyond a critical value would lead to regional collapse of the viral genome into a pear-like structure.

The terminase of bacteriophage lambda. Functional domains for cosB binding and multimer assembly

Terminase is a protein complex involved in lambda DNA packaging. The subunits of terminase, gpNul and gpA, are the products of genes Nul and A. The actions of terminase include DNA binding, prohead binding and DNA nicking. Phage 21 is a lambdoid phage that also makes a terminase, encoded by genes 1 and 2. The terminases of 21 and lambda are not interchangeable. This specificity involves two actions of terminase; DNA binding and prohead binding. In addition, the subunits of lambda terminase will not form functional multimers with the subunits of 21 terminase. lambda-21 hybrid phages can be produced as a result of recombination. We describe here lambda-21 hybrid phages that have hybrid terminase genes. The packaging specificities of the hybrids and the structure of their genes were compared in order to identify functional domains of terminase. The packaging specificities were determined in vivo by complementation tests and helper packaging experiments. Restriction enzyme site mapping and sequencing located the sites at which recombination occurred to produce the hybrid phages. lambda-21 hybrid 51 carries the lambda A gene, and a hybrid 1/Nul gene. The crossover that produced this phage occurred near the middle of the 1 and Nul genes. The amino-terminal portion of the hybrid protein is homologous to gp1 and the carboxy-terminal portion is homologous to gpNul. It binds to 21 DNA and forms functional multimers with gpA, providing evidence that the amino-terminal portion of gpNul is involved in DNA binding and the carboxy-terminal portion of gpNul is involved in the interaction with gpA. lambda-21 hybrid 54 has a hybrid 2/A gene. The amino terminus of the hybrid protein of lambda-21 hybrid 54 is homologous with gp2. This protein forms functional multimers only with gp1, providing evidence that the amino terminus of gpA is involved in the interaction with gpNul. These studies identify three functional domains of terminase.

Structural organization and polypeptide composition of the avian adenovirus core

CELO virus (fowl adenovirus 1) contained three core polypeptides of molecular weights 20,000, 12,000, and 9,500. The core was similar to that of human adenoviruses, with some evidence of compact subcore domains. Micrococcal nuclease digestion of CELO virus cores produced a smear of DNA fragments of gradually decreasing size, with no nucleosome subunit or repeat pattern. Moreover, when digested cores were analyzed without protease treatment, there was again no evidence of a nucleosome substructure; neither DNA fragments nor core proteins entered a 4% polyacrylamide gel. The organization of the core is thus quite unlike that of chromatin. Restriction endonuclease analysis of the DNA from digested cores showed that the right end was on the outside of the core. We suggest that adenovirus DNA is condensed into the core by cross-linking and neutralization by the core proteins, beginning with the packaging sequence at the center of the core and ending with the right end of the DNA on the outside.

Phage head assembly in bacteriophage T1

Phage-related structures found in wild-type and mutant T1 infections were examined by sedimentation analysis, electron microscopy, and polyacrylamide gel electrophoresis. Phage-particle polypeptides P7 (molecular weight 33,000) and P11 (molecular weight 16,000) were identified as major head proteins and P10 (molecular weight 26,000) was shown to be the major tail protein. A DNA-free head-like structure containing P7 but not P11 was present in wild-type and a number of mutant infections. In view of its possible role as a precursor to mature heads, this structure was termed the prohead. Mutants in two genes, am10 (gene 13) and am45 (gene 14), synthesised only tails in nonpermissive infections. Mutants in eight of the head genes, am23 (gene 4), am283 (gene 13.3), am216 (gene 13.7), ts257 (gene 14.5), am11 (gene 15), am4 (gene 16), am7 (gene 17), and am30 (gene 18), synthesised proheads and tails but not other structures. am37 (gene 12) synthesised proheads, tails, and empty heads. Studies with a tail-defective mutant suggested that empty heads were produced from the breakdown of DNA-filled heads. P11, the T1 gene 13.3 product, is analogous to the phage lambda gene D protein: both are major capsid proteins which appear to stabilise the later stages of head filling. These data are reviewed according to the general principles established for phage-head assembly and a tentative pathway for T1-head assembly is proposed.

Spermidine and spermine stimulate the activity of T4-DNA ligase

When the ability of T4-DNA ligase from E. coli NM 989 to form higher molecular weight polymers from linearized plasmid pJDB 207 was followed, it was observed that physiological concentrations (0.5 to 1.0 mM) of spermidine and spermine greatly stimulated the formation of these polymers. The effect had a strict specificity since 1,3-diaminopropane, putrescine (1,4-diaminobutane) and N1-acetylspermidine neither stimulated nor inhibited this activity of DNA ligase. The structural analogues of spermidine, methyl bis(guanylhydrazone) and 1,1'-[(methylethanediylidene)dinitrilo]bis(3-aminoguanidine) totally abolished the stimulatory effect of spermidine on T4-DNA ligase without affecting the enzyme's basal activity.

Early intermediates in bacteriophage lambda prohead assembly. II. Identification of biologically active intermediates

The morphogenesis of bacteriophage lambda proheads is under the control of the four phage genes B, C, Nu3, and E, as well as the E. coli genes groEL and groES. It has been previously shown that extracts prepared from cells infected with a lambda C-E- mutant accumulate biologically active gpB and gpNu3 (Murialdo, H., and Becker, A., J. Mol. Biol. 125, 57-74 (1978) ). To characterize the nature of these intermediates in prohead assembly, extracts prepared from these cells were fractionated by DEAE-cellulose chromatography as well as velocity sedimentation. Intermediates containing gpB were identified by SDS-polyacrylamide gel electrophoresis and by their ability to be assembled into biologically active proheads in vitro. The results indicate that the most abundant, biologically active intermediate (greater than 98% of the gpB activity) is a 25 S gpB-containing polymer. A second biologically active intermediate (about 1% of the total gpB activity) was identified as a gpB-gpgroEL complex.

Coliphage P1 morphogenesis: analysis of mutants by electron microscopy

We used electron microscopy and serum blocking power tests to determine the phenotypes of 47 phage P1 amber mutants that have defects in particle morphogenesis. Eleven mutants showed head defects, 30 showed tail defects, and 6 had a defect in particle maturation (which could be either in the head or in the tail). Consideration of previous complementation test results, genetic and physical positions of the mutations, and phenotypes of the mutants allowed assignment of most of the 47 mutations to genes. Thus, a minimum of 12 tail genes, 4 head genes, and 1 particle maturation gene are now known for P1. Of the 12 tail genes, 1 (gene 19, located within the invertible C loop) codes for tail fibers, 6 (genes 3, 5, 16, 20, 21, and 26) code for baseplate components (although one of these genes could code for the tail tube), 1 (gene 22) codes for the sheath, 1 (gene 6) affects tail length, 2 (genes 7 and 25) are involved in tail stability, and 1 (gene 24) either codes for a baseplate component or is involved in tail stability. Of the four head genes, gene 9 codes for a protein required for DNA packaging. The function of head gene 4 is unclear. Head gene 8 probably codes for a minor head protein, whereas head gene 23 could code for either a minor head protein or the major head protein. Excluding the particle maturation gene (gene 1), the 12 tail genes are clustered in three regions of the P1 physical genome. The four head genes are at four separate locations. However, some P1 head genes have not yet been detected and could be located in two regions (for which there are no known genes) adjacent to genes 4 and 8. The P1 morphogenetic gene clusters are interrupted by many genes that are expressed in the prophage.

Uncoupling of initiation site cleavage from subsequent headful cleavages in bacteriophage T1 DNA packaging

The packaging of intracellular DNA into heads is a key feature in the morphogenesis of bacteriophage particles. In many phages a performed empty head precursor, the prohead, is filled with DNA from a concatemeric substrate consisting of tandemly repeated genome lengths. The addition of outer shell proteins completes head formation. The DNA molecules released from particles of the coliphage T1 exist as three major permutations of nucleotide sequence. Such limited permutation can be explained by the modification of Streisinger's 'headful' mechanism proposed for phage P22. DNA packaging is initiated at a specific site (the pac site) on the concatemeric precursor. While this site is cleaved, subsequent cleavages (headful cleavages) are dependent only on head-filling and are not defined in terms of nucleotide sequence. Headfuls of DNA, consisting of slightly more than a genome length, are packaged in three successive cycles of head-filling to produce the permuted and terminally redundant molecules characteristic of T1 DNA. To elucidate the regulation of this process, we have studied the DNA metabolism of T1 head mutants. We describe here the properties of a mutant in gene 13.3 which is defective for headful cleavage but remains proficient in pac site cleavage. The observation in this mutant that concatemers are degraded to unit-length molecules by repeated pac site cleavage suggests a model of headful packaging in which pac site initiation and processive head-filling compete for the DNA substrate.

Bacteriophage lambda DNA packaging: scanning for the terminal cohesive end site during packaging

Bacteriophage lambda packages the DNA of the related phage 21 poorly [Hohn, B. (1975) J. Mol. Biol. 98, 93--106]. To understand the nature of the packaging defect, the interaction of the cohesive end site (cos) specific for phage 21 (cos phi 21) with phage lambda terminase has been investigated. The ability of lambda terminase to cleave cos phi 21 was studied in vitro; lambda terminase cleaved cos phi 21 only 1% as well as it cleaved the phage lambda cohesive end site (cos lambda). In vitro packaging experiments showed that the lambda and 21 packaging specificities observed in vivo are also found in vitro. The cos cleavage reaction was modified so that competition experiments could be performed; these experiments showed that cos phi 21 was unable to bind lambda terminase, thus identifying the nature of the defect. Previous work [Feiss, M., Fisher, R. A., Siegele, D. A., Nichols, B. P. & Donelson, J. E. (1979) Virology 92, 56--67] has shown that the base pairs giving lambda or 21 packaging specificity are at the left end of the chromosome, outside the 22-base-pair symmetry region that includes the annealed cohesive ends. Therefore, terminase binding to cos requires interactions with base pairs to the Nu1 side of the cohesive end symmetry segment. The evidence supports the proposition that cos consists of adjacent sites for binding of terminase and for nicking by terminase. Because cos phi 21 can be cut by lambda terminase to terminate DNA packaging, it is proposed that the terminase that binds and nicks at the initial cos site is brought into contact with the terminal cos site by the packaging process. Terminase recognizes and nicks the cohesive end sequence of the terminal cos without requiring the binding site.

Regulation of the immune response by polyamines

Regulation of the immune system is accomplished, in part, by numerous soluble factors and small molecules. One such class of regulatory substances may be the polyamines which are present in a variety of tissues. Stimulation of the immune response often occurs by crosslinking of lymphocyte surface proteins, followed by the production of some transmembrane signal. The activation pathway may be interrupted if certain necessary steps are blocked. It is proposed that polyamines exert regulatory influences by modulating crosslink formation; a step catalyzed by the enzyme transglutaminase. A model is outlined which describes the events initiating lymphocyte activation and the role of polyamines in this process. Certain drugs which might mimic the actions of polyamines are also discussed. During evolution of the control of growth processes in cells, relatively simple molecules (the polyamines) may have assumed a pivotal role in initiating and terminating the proliferative response. This idea has been applied to regulation of the immune system.

A comprehensive molecular map of bacteriophage lambda

Physical and genetic mapping of deletion mutations has been correlated with the available molecular sizes of the lambda gene products and the DNA base sequence to construct a comprehensive molecular map of the phage lambda genome. The physical length of the DNA making up the left arm from the cos site through gene J is not sufficient to account in a nonoverlapping manner for all the proteins of the sizes reported to be coded, especially in the Nu1--C region. In the right arm all the coding capacity has not been accounted for, and it appears to be oversaturated only in the gam-ral region. The positions of several IS and Tn elements, and of restriction endonuclease cleavage sites are specified.