Bacteriophage phiX174 DNA synthesis in a replication-deficient host: determination of the origin of phiX DNA replication

Rolling-circle replication of UV-irradiated duplex DNA in the phi X174 replicative-form----single-strand replication system in vitro

Cloning of the phi X174 viral origin of replication into phage M13mp8 produced an M13-phi X174 chimera, the DNA of which directed efficient replicative-form----single-strand rolling-circle replication in vitro. This replication assay was performed with purified phi X174-encoded gene A protein, Escherichia coli rep helicase, single-stranded DNA-binding protein, and DNA polymerase III holoenzyme. The nicking of replicative-form I (RFI) DNA by gene A protein was essentially unaffected by the presence of UV lesions in the DNA. However, unwinding of UV-irradiated DNA by the rep helicase was inhibited twofold as compared with unwinding of the unirradiated substrate. UV irradiation of the substrate DNA caused a strong inhibition in its ability to direct DNA synthesis. However, even DNA preparations that contained as many as 10 photodimers per molecule still supported the synthesis of progeny full-length single-stranded DNA. The appearance of full-length radiolabeled products implied at least two full rounds of replication, since the first round released the unlabeled plus viral strand of the duplex DNA. Pretreatment of the UV-irradiated DNA substrate with purified pyrimidine dimer endonuclease from Micrococcus luteus, which converted photodimer-containing supercoiled RFI DNA into relaxed, nicked RFII DNA and thus prevented its replication, reduced DNA synthesis by 70%. Analysis of radiolabeled replication products by agarose gel electrophoresis followed by autoradiography revealed that this decrease was due to a reduction in the synthesis of progeny full-length single-stranded DNA. This implies that 70 to 80% of the full-length DNA products produced in this system were synthesized on molecules that carried photodimers. Thus, similarly to its activity on UV-irradiated single-stranded DNA, DNA polymerase III holenzyme can bypass pyrimidine photodimers in the more complex replicative form --->single-strand replication, which involves, in addition to the polymerizing activity, the unwinding of the duplex by the rep helicase and the participation of a more complex multiprotein replisome.

Mutational analysis of the bacteriophage phi X174 replication origin

Bacteriophage phi X174 mutants within the 30 base-pair replication origin were constructed using oligodeoxynucleotide-directed mutagenesis. A total of 18 viable base substitution mutants at 13 different positions within the origin region were obtained. The majority of these ori mutants have a plaque morphology and burst size comparable to that of wild-type phi X174. Two phi X174 ori mutants with a reduced growth ability spontaneously acquired additional mutations that enhanced the growth rate. The additional mutation was located at the same site as the original mutation or was located in the N-terminal part of the gene A protein. This latter secondary mutation is responsible for a better binding and/or recognition of the gene A protein to the mutated origin. In a Darwinian experiment wild-type phi X174 outgrows all phi X174 ori mutants, indicating the superiority of the wild-type ori sequence for the reproduction of bacteriophage phi 174. Insertions and deletions were constructed at different positions within the phi X174 replication origin cloned in a plasmid. Small insertions and deletions in the A + T-rich spacer region do not inhibit phi X174 gene A protein cleavage in vitro, but severely impair packaging of single-stranded plasmid DNA in viral coats.

Termination and reinitiation signals of bacteriophage phi X174 rolling circle DNA replication

The nucleotide sequence requirements for termination and reinitiation of rolling circle DNA replication within the 30-bp phi X174 origin region were studied. Plasmids were constructed which contained a complete and a partial phi X174 origin region in the same orientation. The partial origin consisted of the first 16, 24, 25, 26, 27, or 28 bp of the origin region. Plasmids harboring a complete origin region are subject to rolling circle DNA replication and packaging of single-stranded plasmid DNA into phage coats in phi X174 or G4 phage infected cells. The plasmids with a complete and partial origin region were tested in these in vivo transduction systems. The results lead to the following conclusions: The phi X174 and G4 in vivo transduction systems are useful in studying termination and reinitiation of rolling circle DNA replication. The first 24 bp of the origin region are sufficient for termination of a round of rolling circle DNA replication coupled to DNA packaging. The first 16 bp, however, are not recognized as a termination signal. Reinitiation of rolling circle DNA replication coupled to DNA packaging on a partial origin region occurs with low frequency.

Effect of SSB protein on cleavage of single-stranded DNA by phi X gene A protein and A* protein

Gene A protein of bacteriophage phi X174 plays a role as a site-specific endonuclease in the initiation and termination of phi X rolling circle DNA replication. To clarify the sequence requirements of this protein we have studied the cleavage of single-stranded restriction fragments from phi X and G4 viral DNAs using purified gene A protein. The results show that in both viral DNAs cleavage occurs at the origin and at one additional site which shows striking sequence homology with the origin region. During rolling circle replication the single-stranded viral DNA tail is covered with single-stranded DNA binding (SSB) protein. Therefore, we have also studied the effect of SSB on phi X gene A protein cleavage. In these conditions only single-stranded fragments containing the complete or almost complete origin region of 30 bases are cleaved, whereas cleavage at the additional sites of phi X or G4 viral DNAs does not occur. A model for termination of rolling circle replication which is based on these findings is presented. Finally, we present evidence that the second product of gene A, the A* protein, cleaves phi X viral DNA at the additional cleavage site in the presence of SSB, not only in vitro but also in vivo. The functional significance of this cleavage in vivo is discussed.

The complete 30-base-pair origin region of bacteriophage phi X174 in a plasmid is both required and sufficient for in vivo rolling-circle DNA replication and packaging

The origin of replication of the isometric single-stranded DNA bacteriophages is located in a specific sequence of 30 nucleotides, the origin region, which is highly conserved in these phage genomes. Plasmids harboring this origin region are subject to rolling-circle DNA replication and packaging of single-stranded (ss) plasmid DNA into phage coats in phi X174 or G4-phage-infected cells. This system was used to study the nucleotide sequence requirements for rolling-circle DNA replication and DNA packaging employing plasmids which contain the first 24, 25, 26, 27, 28 and the complete 30-base-pair (bp) origin region of phi X174. No difference in plasmid ss DNA packaging was observed for plasmids carrying only the 30-bp origin region and plasmids carrying the 30-bp origin region plus surrounding sequences (i.e. plasmids carrying the HaeIII restriction fragment Z6B of phi X174 replicative-form DNA). This indicates that all signals for DNA replication and phage morphogenesis are contained in the 30-bp origin region and that no contribution is made by sequences which immediately surround the origin region in the phi X174 genome. The efficiency of packaging of plasmid ssDNA for plasmids containing deletions in the right part of the origin region decreases drastically when compared with the plasmid containing the complete 30-bp origin region (for a plasmid carrying the first 28 bp of the origin region to approximately 5% and 0.5% in the phi X174 and G4 systems respectively). Previous studies [Fluit, A.C., Baas, P.D., van Boom, J.H., Veeneman, G.H. and Jansz, H.S. (1984) Nucleic Acids Res. 12, 6443--6454] have shown that the presence of the first 27 bp of the origin region is necessary as well as sufficient for cleavage of the viral strand in the origin region by phi X174 gene A protein. Moreover, Brown et al. [Brown, D.R., Schmidt-Glenewinkel, T., Reinberg, D. and Hurwitz, J. (1983) J. Biol. Chem. 258, 8402--8412] have shown that omission of the last 2 bp of the origin region does not interfere with phi X174 rolling-circle DNA replication in vitro. Our results therefore suggest that for optimal phage development in vivo, signals in the origin region are utilized which have not yet been noticed by the in vitro systems for phi X174 phage DNA replication and morphogenesis.

Gene A protein cleavage of recombinant plasmids containing the phi X174 replication origin

Synthetic oligonucleotides, DNA ligase and DNA polymerase were used to construct double-stranded DNA fragments homologous to the first 25, 27 or 30 b.p. of the origin of replication of bacteriophage phi X174 (nucleotides 4299-4328 of the phi X174 DNA sequence). The double-stranded DNA fragments were cloned into the unique SmaI or HindIII restriction sites in the kanamycin-resistance gene of pACYC177 (AmpR, KmR). Recombinant plasmids were picked up by colony hybridization. DNA sequencing showed that not only recombinant plasmids with the expected insert were formed, but also recombinant plasmids with a shorter insert. Recombinant plasmids with an insert homologous to the first 24, 25, 26, 27, 28 or all 30 b.p. of the phi X174 origin region were thus obtained. Supercoiled plasmids containing a sequence homologous to the first 27, 28 or 30 b.p. of the phi X174 origin region are nicked by the phi X174 gene A protein. However, the other supercoiled plasmids are not nicked by the phi X174 gene A protein. These results show that the first 27 b.p. of the phi X174 origin region are sufficient as well as required for the initiation step in phi X174 RF DNA replication, i.e. the cleavage by gene A protein.

In vitro synthesis of bacteriophage phi X174 by purified components

An in vitro system capable of synthesizing infectious phi X174 phage particles was reconstituted from purified components. The synthesis required phi X174 supercoiled replicative form DNA, phi X174-encoded proteins A, C, J, and prohead, Escherichia coli DNA polymerase III holoenzyme, rep protein, and deoxyuridinetriphosphatase (dUTPase, dUTP nucleotidohydrolase, EC 3.6.1.23) as well as MgCl2, four deoxyribonucleoside triphosphates, and ATP. Phage production was coupled to the synthesis of viral single-stranded DNA. More than 70% of the synthesized particles sedimented at the position of mature phage in a sucrose gradient and associated with the infectivity. The simple requirement of the host proteins suggests that the mechanism of viral strand synthesis in the phage-synthesizing reaction resembles that of viral strand synthesis during the replication of replicative form DNA.

Cloned bacteriophage phi X174 DNA sequence interferes with synthesis of the complementary strand of infecting bacteriophage phi X174

The insertion of a particular phi X DNA sequence in the plasmid pACYC177 strongly decreased the capacity of Escherichia coli cells containing such a plasmid to propagate bacteriophage phi X174. The smallest DNA sequence tested that showed the effect was the HindII fragment R4. This fragment does not code for a complete protein. It contains the sequence specifying the C-terminal part of the gene H protein and the N-terminal part of the gene A protein, as well as the noncoding region between these genes. Analysis of cells that contain plasmids with the "reduction sequence" showed that (i) the adsorption of the phages to the host cells is normal, (ii) in a single infection cycle much less phage is formed, (iii) only 10% of the infecting viral single-stranded DNA is converted to double-stranded replicative-form DNA, and (iv) less progeny replicative form DNA is synthesized. The reduction process is phi X174 specific, since the growth of the related G4 and St-1 phages was not affected in these cells. The effect of the recombinant plasmids on infecting phage DNA shows similarity to the process of superinfection exclusion.

Nucleotide sequences at the phi X gene A protein cleavage site in replicative form I DNAs of bacteriophages U3, G14, and alpha 3

Gene A protein, a bacteriophage phi X174-encoded endonuclease involved in phi X replicative form (RF) DNA replication, nicks not only phi X RFI DNA but also RFI DNAs of several other spherical single-stranded DNA bacteriophages. The position of the phi X gene A protein nick and the nucleotide sequence surrounding this site in RF DNAs of the bacteriophages U3, G14, and alpha 3 were determined. Comparison of the nucleotide sequences which surround the nick site of the gene A protein in RF DNAs of phi X174, G4, St-1, U3, G14, and alpha 3 revealed that a strongly conserved 30-nucleotide stretch occurred in RF DNAs of all six phages. However, perfect DNA sequence homology around this site was only 10 nucleotides, the decamer sequence CAACTTGATA. The present results support the hypothesis that, for nicking of double-stranded supercoiled DNA by the phi X gene A protein, the presence of the recognition sequence CAACTTGATA and a specific gene A protein binding sequence upstream from the recognition sequence are required. The sequence data obtained so far from phages U3, G14, St-1, and alpha 3 have been compared with the nucleotide sequences and amino acid sequences of both phi X and G4. According to this comparison, the evolutionary relationship between phages G4, U3, and G14 is very close, which also holds for phages alpha 3 and St-1. However, the two groups are only distantly related, both to each other and to phi X.

Construction and characterization of recombinant plasmid DNAs containing sequences of the origin of bacteriophage phi X174 DNA replication

The synthetic DNA fragment (formula, see text) (corresponding to nucleotides 4299-4314 of the phi X DNA sequence) was cloned into either the AmpR gene or the KmR gene of plasmid pACYC 177. The DNA sequence of the KmR gene around the insertion site was determined by nucleotide sequence analysis of the pACYC 177 FnudII restriction DNA fragment N6 (345 b.p.). Of five selected plasmid DNAs, which contained inserted DNA sequences in the antibiotic resistance genes, the nucleotide sequences at and around these insertions were determined. Two recombinant plasmids (pFH 704 and pFH 614) contain the hexadecamer sequence in tandem (tail-to-tail and tail-to-head). In the recombinant plasmids pFH 812, pFH 903 and pFH 807 the DNA sequence homology with the phi X origin region was 14 (No. 4300-4313), 16 (No. 4299-4314) and 20 nucleotides (No. 4299-4318), respectively. None of the supercoiled recombinant plasmid DNAs is nicked upon incubation with phi X gene A protein. Moreover, the recombinant plasmid RFI DNAs cannot act as substitutes for phi X RFI DNA in the in vitro (+) strand synthesizing system. It has been shown earlier that single-stranded DNA, which contains the decamer sequence CAACTTGATA is efficiently nicked by the phi X gene A protein. The present results indicate that for nicking of double-stranded supercoiled DNA nucleotide sequence homology with the phi X origin region of more than 20 nucleotides is required. These results suggest a model for initiation of phi X RF DNA replication, which involves the presence of the recognition sequence CAACTTGATA of the phi X gene A protein as well as a second specific nucleotide sequence which is required for the binding of the phi X gene A protein. This binding causes local unwinding of the DNA double helix and exposure of the recognition sequence in a single-stranded form, which then can be nicked by phi X gene A protein.

Recognition sequence of bacteriophage phi X174 gene A protein--an initiator of DNA replication

Gene A protein, the initiator protein of bacteriophage phi X174 DNA replication, cleaves synthetic single-stranded oligodeoxyribonucleotides at the same site as the corresponding sequence at the phi X origin. The results identify the recognition sequence within the decamer CAACTTGATA which is cleaved next to the G residue. Further requirements for cleavage of double-stranded DNA by the gene A protein are supercoiling and an A + T-rich domain adjacent to the recognition sequence.

Genes and sites involved in replication and incompatibility of an R100 plasmid derivative based on nucleotide sequence analysis

The nucleotide sequence of the entire region required for autonomous replication and incompatibility of an R100 plasmid derivative, pSM1, has been determined. This region includes the replication region and all plasmid encoded information required for replication. Numerous reading frames for possible proteins can be found in this region. The existence of one of these proteins called RepA1 (285 amino acids; 33,000 daltons) which is encoded within the region known by cloning analysis to be required for replication is supported by several lines of evidence. These include an examination of the characteristic sequences on the proximal and distal ends of the coding region, a comparison of the sequence of the replication regions of pSM1 and the highly related R1 plasmid derivative Rsc13 as well as other biochemical and genetic evidence. The existence of two other proteins, RepA3 (64 amino acis; 7000 daltons) and RepA2 (103 amino acids; 11,400 daltons) is also consistent with most of the criteria mentioned above. However, the region encoding RepA3, which by cloning analysis is within the region responsible for both replication and incompatibility, has never been demonstrated to produce a 7,000 dalton polypeptide. Since a large secondary structure can be constructed in this region, it is possible that the region contains structure or other information that is responsible for incompatibility. RepA2, encoded entirely within the region identified by cloning analysis to be responsible for incompatibility but not for replication can be visualized in vivo and in vitro. However, the nucleotide sequence of the region encoding RepA2 is completely different in mutually incompatible plasmid derivatives of R1 and R100. It is therefore unlikely that RepA2 plays a major role in incompatibility. Thus, we predict that RepA2 is required to initiate DNA synthesis at the replication origin and that the region proximal to RepA2 either encodes a gene product or structure information that is responsible for incompatibility.

Studies of the recognition sequence of phi X174 gene A protein. Cleavage site of phi X gene A protein in St-1 RFI DNA

It is already known that phi X gene A protein converts besides phi X RFI DNA also the RFI DNAs of the single-stranded bacteriophages G4, St-1, alpha 3 and phi K into RFII DNA. We have extended this observations for bacteriophages G14 and U3. Restriction enzyme analysis placed the phi X gene A protein cleavage site in St-1 RF DNA in the HinfI restriction DNA fragment F10 and in the overlapping HaeIII restriction DNA fragment Z7. The exact position and the nucleotide sequence at the 3'-OH end of the nick were determined by DNA sequence analysis of the single-stranded DNA subfragment of the nicked DNA fragment F10 obtained by gelelectrophoresis in denaturing conditions. A stretch of 85 nucleotides of St-1 DNA around the position of the phi X gene A protein cleavage site was established by DNA sequence analysis of the restriction DNA fragment Z7F1. Comparison of this nucleotide sequence with the previously determined nucleotide sequence around the cleavage site of phi X gene A protein in phi X174 RF DNA and G4 RF DNA revealed an identical sequence of only 10 nucleotides. The results suggest that the recognition sequence of the phi X174 gene A protein lies within these 10 nucleotides.

Replication of bacteriophage M13. XV. Location of the specific nick in M13 replicative form II accumulated in Escherichia coli polAex1

M13 replicative form II (RFII) DNA was prepared from Escherichia coli RS5052 (polAex1) cells in the late stage of infection, and the DNA sequence at the discontinuity was examined. The data presented here suggest that the single discontinuity in the late stage of infection RFII maps at the same position as the gene II protein nicking site on fd RFI which was determined in vitro (Meyer et al., Nature (London) 278:365-367, 1979) and has a 5' terminal nucleotide sequence identical to that at the nick produced by gene II protein in vitro. The discontinuity in the in vivo RFII appears to be a single break in the phosphodiester backbone, leaving a 3' OH terminus. RFII molecules containing a gap, i.e., missing nucleotides at the site of discontinuity, were not detected.

Conditionally lethal amber mutations in the dnaA region of the Escherichia coli chromosome that affect chromosome replication

Three amber mutations, dna-801, dna-803, and dna-806, were isolated by localized mutagenesis of the dnaA-oriC region of the chromosome from an Escherichia coli strain carrying temperature-sensitive amber suppressors. When the mutations were not suppressed at 42 degrees C, the cells did not grow and DNA synthesis was arrested. They were very closely linked to each other and to the dnaA46 mutation. The mutant phenotype of each strain was converted to the wild type by infecting the mutants with specialized transducing phase lambda i21 dnaA-2 but not with lambda i21 tna. Derivatives of lambda i21 dnaA-2, each of which carried the amber mutation dna-801 dna-803, or dna-806, converted the dnaA mutant phenotype to Dna+ but did not convert rhe amber mutants to the wild-type phenotype. E. coli uvrB cells were irradiated with ultraviolet light and infected with each of these phage strains. An analysis of proteins synthesized in the cells revealed that two proteins with molecular weights of 50,000 and 43,000 were specified by lambda i21 dnaA-2 but not by lambda i21 tna. When the ultraviolet-irradiated cells did not carry an amber suppressor, the derivative phage with the amber mutation invariably failed to produce the 43,000-dalton protein, but when the host cell carried supF (tyrT), the protein was produced. The 50,000-dalton protein was unaffected.

Analysis of in vitro replication of different DNAs

The conversion of single-stranded circular DNA to duplex DNA in vitro occurs by at least three different mechanisms. These differences reside in the manner of priming of these DNAs. In contrast, the elongation of primed DNA templates is a general reaction. A number of these proteins have been isolated and further characterized. In addition, cell-free preparations capable of supporting phi X RFI DNA replication as well as the synthesis of progeny viral phi X174 single-stranded circular DNA have been prepared.

"Nick translation" in Escherichia coli rep strains deficient in DNA polymerase I activities

Using phiX1974 replicative form (RF) DNA as an in vivo probe, we have investigated the coordinated action of the 5' leads to 3' exonuclease and polymerase activities of DNA polymerase I in order to understand better its physiological role. We constructed double mutants containing the rep mutation (the replication of phiX174 RF does not occur in rep mutants) together with a mutation affecting DNA polymerase I, either polA12 or polA546ex. Using these mutants, which are believed to be thermosensitive in the polymerase function or the 5' leads to 3' exonuclease function respectively, we studied the kinetics of nick translation at the permissive and non-permissive temperatures in vivo. The substrate was the phiX174 replicative form DNA nicked by the phiX174 gene A protein. E. coli rep polA546ex gave the lowest rate of nick translation, although the ability to perform nick translation, at least as measured by our assay, was still present. E. coli rep polA12 showed a similar low rate at the non-permissive temperature but a rate close to the wild-type level at the permissive temperature. Formation of the parental replicative form molecule in either strain was affected little, even at the restrictive temperature. Our results suggest that DNA polymerase I may not play a major role in ongoing DNA replication.

The nucleotide sequence of the region surrounding the replication origin of an R100 resistance factor derivative

The replication origin of a group of small plasmids derived from R100 was previously determined by electron microscopy (Ohtsubo et al., 1977). This region was subjected to extensive restriction enzyme analysis and the nucleotide sequence of the region containing the replication origin was determined using the Maxam and Gilbert sequencing technique. Various characteristics of this sequence, including a very interesting secondary structure are described and discussed.

Nucleotide sequence of the origin of replication in bacteriophage phiX174 RF DNA

The gene A protein of bacteriophage phiX174 has been used in vitro to convert phiX RFI DNA into the relaxed RFII form by nicking the viral strand. The nucleotide sequence at the 3' end of the nick has been determined as -- T G C T C C C C C A A C T T Goh. This sequence gives the exact position of the origin of phiX RF DNA replication.

Physical structure of the replication origin of bacteriophage lambda

The nucleotide sequence of part of the replication region of wild-type bacteriophage lambda and of four mutants defective in the origin of DNA replication (ori-) has been determined. Three of the ori- mutations are small deletions, and one is a transversion. The sequence of the origin region, defined by these mutations, contains a number of unusual features.

Nucleotide sequence of bacteriophage phi X174 DNA

A DNA sequence for the genome of bacteriophage phi X174 of approximately 5,375 nucleotides has been determined using the rapid and simple 'plus and minus' method. The sequence identifies many of the features responsible for the production of the proteins of the nine known genes of the organism, including initiation and termination sites for the proteins and RNAs. Two pairs of genes are coded by the same region of DNA using different reading frames.

Restriction endonucleases

This review provides a comprehensive account of the current status of the biology and biochemistry of restriction endonucleases. Both Class I and Class II restriction endonucleases will be considered. However, emphasis will be placed on the Class II group, which recognizes and cleaves a specific duplex DNA sequence. Their occurrence, purification, and characterization is discussed in detail. The characterization includes physical mapping information and determination of recognition sequences. In addition to detailed discussions of the biochemical properties of the enzymes, considerable attention is paid to the uses of these enzymes as tools for research in molecular biology. These uses include physical mapping of genomes and their transcripts, genetic analysis (marker rescue, etc.), DNA sequence analysis, analysis of complex genomes, and genetic engineering. Specific examples of each use are outlined. Practical aspects of both the isolation and use of the restriction endonucleases form the major theme of this review.

The nucleotide sequence of a DNA fragment, 71 base pairs in length, near the origin of DNA replication of bacteriophage 0X174

Part of the nucleotide sequence of a restriction fragment covering the origin of phiX174 DNA replication 1 has been determined. The fragment A7c was obtained by digestion of phiX174 RF DNA by the restriction enzyme from Arthrobacter luteus, Alu 1. It was further cleaved into two fragments, one large and one small, by the action of the restriction enzyme from Haemophilus aegyptius, Hae 111. The nucleotide sequence of the small fragment has been determined by analysis of the transcription products obtained by the action of Escherichia coli DNA-dependent RNA polymerase on denaturated template under conditions of low salt. Transcripts longer than the template were found. The whole sequence of 71 nucleotide pairs could be derived from complementary oligonucleotides, obtained after digestion of the transcripts with T1 or pancreatic RNAase. The sequence suggests that at least 4 of the 5 amber mutants 2 that have been mapped on this fragment are identical. On account of this and other evidence a reading frame is proposed.

Enzymatic replication of viral and complementary strands of duplex DNA of phage phiX174 proceeds by seprate mechanisms

Multiplication of the duplex, circular, phage phiX174DNA (replicative form, RF) in stage II of the replicative life cycle has been observed with a crude enzyme preparation [Eisenberg et al. (1976) Proc, Natl. Acad, Sci. USA 73, 1594-1597]. This stage has now been partially reconstituted with purified proteins and subdivided into two stages: II(+) and II(-). In stage II(+), viral (+) strand synthesis is carried out by four proteins: the phage-induced, cistron A-dependent protein, rep-dependent protein, DNA unwinding protein, and DNA polymerase III holenzyme. In stage II(-), complementary (-) strand synthesis utilizes the product of stage II(+) as template and the multiprotein system previously identified in the stage I synthesis of a complementary strand on the viral DNA template to produce RF. The multiprotein system includes DNA unwinding protein, proteins i and n, dnaB protein, dnaC protein, dnaG protein, and DNA polymerase III holoenzyme. A discussion of these two separate mechanism for synthesis of (+) and (-) strands suggests that they may account for essentially all the replicative stages in the life cycle of phiX174.

Isolation and characterization of the protein coded by gene A of bacteriophage phiX174 DNA

Replication of phiX174 circular replicative form (RFI) DNA by extracts of Escherichia coli infected with bacteriophage phiX174 (amber in gene A) requires the phiX174 gene A product. This requirement has been used as an assay for the isolation of this protein. The gene A product (purified 4000-fold) caused relaxation of superhelical phiX174 RFI and formation of discontinuities in the viral strand of phiX174 RFI uniquely situated in the A region of the genome, and yielded a complex after interacting with phiX174 RFI that is active in replication of phiX RFI.

Cleavage map of bacteriophage phiX174 RF DNA by restriction enzymes

phiX RF DNA was cleaved by restriction enzymes from Haemophilus influenzae Rf (Hinf I) and Haemophilus haemolyticus (Hha. I). Twenty one fragments of approximately 25 to 730 base pairs were produced by Hinf I and seventeen fragments of approximately 40 to 1560 base pairs by Hha I. The order of these fragments has been established by digestion on Haemophilus awgyptius (Hae III) and Arthrobacter luteus (Alu I) endonuclease fragments of phiX RF with Hinf I and Hha1. By this method of reciprocal digestion a detailed cleavage map of phiX RF DNA was constructed, which includes also the previously determined Hind II, Hae III and Alu I cleavage maps of phiX 174 RF DNA (1, 2). Moreover, 28 conditional lethal mutants of bacteriophage phiX174 were placed in this map using the genetic fragment assay (3).