Transposon Tn7. cis-Acting sequences in transposition and transposition immunity

Assembly of the Tn7 targeting complex by a regulated stepwise process

The Tn7 family of transposons is notable for its highly regulated integration mechanisms, including programmable RNA-guided transposition. The targeting pathways rely on dedicated target selection proteins from the TniQ family and the AAA+ adaptor TnsC to recruit and activate the transposase at specific target sites. Here, we report the cryoelectron microscopy (cryo-EM) structures of TnsC bound to the TniQ domain of TnsD from prototypical Tn7 and unveil key regulatory steps stemming from unique behaviors of ATP- versus ADP-bound TnsC. We show that TnsD recruits ADP-bound dimers of TnsC and acts as an exchange factor to release one protomer with exchange to ATP. This loading process explains how TnsC assembles a heptameric ring unidirectionally from the target site. This unique loading process results in functionally distinct TnsC protomers within the ring, providing a checkpoint for target immunity and explaining how insertions at programmed sites precisely occur in a specific orientation across Tn7 elements.

Novel mechanisms of diversity generation in Acinetobacter baumannii resistance islands driven by Tn7-like elements

Mobile genetic elements play an important role in the acquisition of antibiotic and biocide resistance, especially through the formation of resistance islands in bacterial chromosomes. We analyzed the contribution of Tn7-like transposons to island formation and diversification in the nosocomial pathogen Acinetobacter baumannii and identified four separate families that recognize different integration sites. One integration site is within the comM gene and coincides with the previously described Tn6022 elements suggested to account for the AbaR resistance island. We established Tn6022 in a heterologous E. coli host and confirmed basic features of transposition into the comM attachment site and the use of a novel transposition protein. By analyzing population features within Tn6022 elements we identified two potential novel transposon-encoded diversification mechanisms with this dynamic genetic island. The activities of these diversification features were confirmed in E. coli. One was a novel natural gain-of-activity allele that could function to broaden transposition targeting. The second was a transposon-encoded hybrid dif-like site that parasitizes the host dimer chromosome resolution system to function with its own tyrosine recombinase. This work establishes a highly active Tn7-like transposon that harnesses novel features allowing the spread and diversification of genetic islands in pathogenic bacteria.

Bacterial genome engineering using CRISPR-associated transposases

Clustered regularly interspaced short palindromic repeats (CRISPR)-associated transposases have the potential to transform the technology landscape for kilobase-scale genome engineering, by virtue of their ability to integrate large genetic payloads with high accuracy, easy programmability and no requirement for homologous recombination machinery. These transposons encode efficient, CRISPR RNA-guided transposases that execute genomic insertions in Escherichia coli at efficiencies approaching ~100%. Moreover, they generate multiplexed edits when programmed with multiple guides, and function robustly in diverse Gram-negative bacterial species. Here we present a detailed protocol for engineering bacterial genomes using CRISPR-associated transposase (CAST) systems, including guidelines on the available vectors, customization of guide RNAs and DNA payloads, selection of common delivery methods, and genotypic analysis of integration events. We further describe a computational CRISPR RNA design algorithm to avoid potential off-targets, and a CRISPR array cloning pipeline for performing multiplexed DNA insertions. The method presented here allows the isolation of clonal strains containing a novel genomic integration event of interest within 1-2 weeks using available plasmid constructs and standard molecular biology techniques.

Novel molecular requirements for CRISPR RNA-guided transposition

CRISPR-associated transposases (CASTs) direct DNA integration downstream of target sites using the RNA-guided DNA binding activity of nuclease-deficient CRISPR-Cas systems. Transposition relies on several key protein-protein and protein-DNA interactions, but little is known about the explicit sequence requirements governing efficient transposon DNA integration activity. Here, we exploit pooled library screening and high-throughput sequencing to reveal novel sequence determinants during transposition by the Type I-F Vibrio cholerae CAST system (VchCAST). On the donor DNA, large transposon end libraries revealed binding site nucleotide preferences for the TnsB transposase, as well as an additional conserved region that encoded a consensus binding site for integration host factor (IHF). Remarkably, we found that VchCAST requires IHF for efficient transposition, thus revealing a novel cellular factor involved in CRISPR-associated transpososome assembly. On the target DNA, we uncovered preferred sequence motifs at the integration site that explained previously observed heterogeneity with single-base pair resolution. Finally, we exploited our library data to design modified transposon variants that enable in-frame protein tagging. Collectively, our results provide new clues about the assembly and architecture of the paired-end complex formed between TnsB and the transposon DNA, and inform the design of custom payload sequences for genome engineering applications with CAST systems.

Insight into the molecular mechanism of the transposon-encoded type I-F CRISPR-Cas system

CRISPR-Cas9 is a popular gene-editing tool that allows researchers to introduce double-strand breaks to edit parts of the genome. CRISPR-Cas9 system is used more than other gene-editing tools because it is simple and easy to customize. However, Cas9 may produce unintended double-strand breaks in DNA, leading to off-target effects. There have been many improvements in the CRISPR-Cas system to control the off-target effect and improve the efficiency. The presence of a nuclease-deficient CRISPR-Cas system in several bacterial Tn7-like transposons inspires researchers to repurpose to direct the insertion of Tn7-like transposons instead of cleaving the target DNA, which will eventually limit the risk of off-target effects. Two transposon-encoded CRISPR-Cas systems have been experimentally confirmed. The first system, found in Tn7 like-transposon (Tn6677), is associated with the variant type I-F CRISPR-Cas system. The second one, found in Tn7 like-transposon (Tn5053), is related to the variant type V-K CRISPR-Cas system. This review describes the molecular and structural mechanisms of DNA targeting by the transposon-encoded type I-F CRISPR-Cas system, from assembly around the CRISPR-RNA (crRNA) to the initiation of transposition.

Bacterial genome engineering using CRISPR RNA-guided transposases

CRISPR-associated transposons (CASTs) have the potential to transform the technology landscape for kilobase-scale genome engineering, by virtue of their ability to integrate large genetic payloads with high accuracy, easy programmability, and no requirement for homologous recombination machinery. These transposons encode efficient, CRISPR RNA-guided transposases that execute genomic insertions in E. coli at efficiencies approaching ~100%, generate multiplexed edits when programmed with multiple guides, and function robustly in diverse Gram-negative bacterial species. Here we present a detailed protocol for engineering bacterial genomes using CAST systems, including guidelines on the available homologs and vectors, customization of guide RNAs and DNA payloads, selection of common delivery methods, and genotypic analysis of integration events. We further describe a computational crRNA design algorithm to avoid potential off-targets and CRISPR array cloning pipeline for DNA insertion multiplexing. Starting from available plasmid constructs, the isolation of clonal strains containing a novel genomic integration event-of-interest can be achieved in 1 week using standard molecular biology techniques.

Transposon mutagenesis libraries reveal novel molecular requirements during CRISPR RNA-guided DNA integration

CRISPR-associated transposons (CASTs) direct DNA integration downstream of target sites using the RNA-guided DNA binding activity of nuclease-deficient CRISPR-Cas systems. Transposition relies on several key protein-protein and protein-DNA interactions, but little is known about the explicit sequence requirements governing efficient transposon DNA integration activity. Here, we exploit pooled library screening and high-throughput sequencing to reveal novel sequence determinants during transposition by the Type I-F Vibrio cholerae CAST system. On the donor DNA, large mutagenic libraries identified core binding sites recognized by the TnsB transposase, as well as an additional conserved region that encoded a consensus binding site for integration host factor (IHF). Remarkably, we found that VchCAST requires IHF for efficient transposition, thus revealing a novel cellular factor involved in CRISPR-associated transpososome assembly. On the target DNA, we uncovered preferred sequence motifs at the integration site that explained previously observed heterogeneity with single-base pair resolution. Finally, we exploited our library data to design modified transposon variants that enable in-frame protein tagging. Collectively, our results provide new clues about the assembly and architecture of the paired-end complex formed between TnsB and the transposon DNA, and inform the design of custom payload sequences for genome engineering applications of CAST systems.

Mechanistic details of CRISPR-associated transposon recruitment and integration revealed by cryo-EM

CRISPR-associated transposons (CASTs) are Tn7-like elements that are capable of RNA-guided DNA integration. Although structural data are known for nearly all core transposition components, the transposase component, TnsB, remains uncharacterized. Using cryo-electron microscopy (cryo-EM) structure determination, we reveal the conformation of TnsB during transposon integration for the type V-K CAST system from Scytonema hofmanni (ShCAST). Our structure of TnsB is a tetramer, revealing strong mechanistic relationships with the overall architecture of RNaseH transposases/integrases in general, and in particular the MuA transposase from bacteriophage Mu. However, key structural differences in the C-terminal domains indicate that TnsB's tetrameric architecture is stabilized by a different set of protein-protein interactions compared with MuA. We describe the base-specific interactions along the TnsB binding site, which explain how different CAST elements can function on cognate mobile elements independent of one another. We observe that melting of the 5' nontransferred strand of the transposon end is a structural feature stabilized by TnsB and furthermore is crucial for donor-DNA integration. Although not observed in the TnsB strand-transfer complex, the C-terminal end of TnsB serves a crucial role in transposase recruitment to the target site. The C-terminal end of TnsB adopts a short, structured 15-residue "hook" that decorates TnsC filaments. Unlike full-length TnsB, C-terminal fragments do not appear to stimulate filament disassembly using two different assays, suggesting that additional interactions between TnsB and TnsC are required for redistributing TnsC to appropriate targets. The structural information presented here will help guide future work in modifying these important systems as programmable gene integration tools.

MicroRNA-101a enhances trabecular bone accrual in male mice

High-throughput microRNA sequencing was performed during differentiation of MC3T3-E1 osteoblasts to develop working hypotheses for specific microRNAs that control osteogenesis. The expression data show that miR-101a, which targets the mRNAs for the epigenetic enzyme Ezh2 and many other proteins, is highly upregulated during osteoblast differentiation and robustly expressed in mouse calvaria. Transient elevation of miR-101a suppresses Ezh2 levels, reduces tri-methylation of lysine 27 in histone 3 (H3K27me3; a heterochromatic mark catalyzed by Ezh2), and accelerates mineralization of MC3T3-E1 osteoblasts. We also examined skeletal phenotypes of an inducible miR-101a transgene under direct control of doxycycline administration. Experimental controls and mir-101a over-expressing mice were exposed to doxycycline in utero and postnatally (up to 8 weeks of age) to maximize penetrance of skeletal phenotypes. Male mice that over-express miR-101a have increased total body weight and longer femora. MicroCT analysis indicate that these mice have increased trabecular bone volume fraction, trabecular number and trabecular thickness with reduced trabecular spacing as compared to controls. Histomorphometric analysis demonstrates a significant reduction in osteoid volume to bone volume and osteoid surface to bone surface. Remarkably, while female mice also exhibit a significant increase in bone length, no significant changes were noted by microCT (trabecular bone parameters) and histomorphometry (osteoid parameters). Hence, miR-101a upregulation during osteoblast maturation and the concomitant reduction in Ezh2 mediated H3K27me3 levels may contribute to the enhanced trabecular bone parameters in male mice. However, the sex-specific effect of miR-101a indicates that more intricate epigenetic mechanisms mediate physiological control of bone formation and homeostasis.

Structural basis of transposon end recognition explains central features of Tn7 transposition systems

Tn7 is a bacterial transposon with relatives containing element-encoded CRISPR-Cas systems mediating RNA-guided transposon insertion. Here, we present the 2.7 Å cryoelectron microscopy structure of prototypic Tn7 transposase TnsB interacting with the transposon end DNA. When TnsB interacts across repeating binding sites, it adopts a beads-on-a-string architecture, where the DNA-binding and catalytic domains are arranged in a tiled and intertwined fashion. The DNA-binding domains form few base-specific contacts leading to a binding preference that requires multiple weakly conserved sites at the appropriate spacing to achieve DNA sequence specificity. TnsB binding imparts differences in the global structure of the protein-bound DNA ends dictated by the spacing or overlap of binding sites explaining functional differences in the left and right ends of the element. We propose a model of the strand-transfer complex in which the terminal TnsB molecule is rearranged so that its catalytic domain is in a position conducive to transposition.

Recruitment of Mobile Genetic Elements for Diverse Cellular Functions in Prokaryotes

Prokaryotic genomes are replete with mobile genetic elements (MGE) that span a continuum of replication autonomy. On numerous occasions during microbial evolution, diverse MGE lose their autonomy altogether but, rather than being quickly purged from the host genome, assume a new function that benefits the host, rendering the immobilized MGE subject to purifying selection, and resulting in its vertical inheritance. This mini-review highlights the diversity of the repurposed (exapted) MGE as well as the plethora of cellular functions that they perform. The principal contribution of the exaptation of MGE and their components is to the prokaryotic functional systems involved in biological conflicts, and in particular, defense against viruses and other MGE. This evolutionary entanglement between MGE and defense systems appears to stem both from mechanistic similarities and from similar evolutionary predicaments whereby both MGEs and defense systems tend to incur fitness costs to the hosts and thereby evolve mechanisms for survival including horizontal mobility, causing host addiction, and exaptation for functions beneficial to the host. The examples discussed demonstrate that the identity of an MGE, overall mobility and relationship with the host cell (mutualistic, symbiotic, commensal, or parasitic) are all factors that affect exaptation.

Structural basis for DNA targeting by the Tn7 transposon

Tn7 transposable elements are unique for their highly specific, and sometimes programmable, target-site selection mechanisms and precise insertions. All the elements in the Tn7 family utilize an AAA+ adaptor (TnsC) to coordinate target-site selection with transpososome assembly and to prevent insertions at sites already containing a Tn7 element. Owing to its multiple functions, TnsC is considered the linchpin in the Tn7 element. Here we present the high-resolution cryo-EM structure of TnsC bound to DNA using a gain-of-function variant of the protein and a DNA substrate that together recapitulate the recruitment to a specific DNA target site. TnsC forms an asymmetric ring on target DNA that segregates target-site selection and interaction with the paired-end complex to opposite faces of the ring. Unlike most AAA+ ATPases, TnsC uses a DNA distortion to find the target site but does not remodel DNA to activate transposition. By recognizing pre-distorted substrates, TnsC creates a built-in regulatory mechanism where ATP hydrolysis abolishes ring formation proximal to an existing element. This work unveils how Tn7 and Tn7-like elements determine the strict spacing between the target and integration sites.

Cargo Genes of Tn7-Like Transposons Comprise an Enormous Diversity of Defense Systems, Mobile Genetic Elements, and Antibiotic Resistance Genes

Transposition is a major mechanism of horizontal gene mobility in prokaryotes. However, exploration of the genes mobilized by transposons (cargo) is hampered by the difficulty in delineating integrated transposons from their surrounding genetic context. Here, we present a computational approach that allowed us to identify the boundaries of 6,549 Tn7-like transposons. We found that 96% of these transposons carry at least one cargo gene. Delineation of distinct communities in a gene-sharing network demonstrates how transposons function as a conduit of genes between phylogenetically distant hosts. Comparative analysis of the cargo genes reveals significant enrichment of mobile genetic elements (MGEs) nested within Tn7-like transposons, such as insertion sequences and toxin-antitoxin modules, and of genes involved in recombination, anti-MGE defense, and antibiotic resistance. More unexpectedly, cargo also includes genes encoding central carbon metabolism enzymes. Twenty-two Tn7-like transposons carry both an anti-MGE defense system and antibiotic resistance genes, illustrating how bacteria can overcome these combined pressures upon acquisition of a single transposon. This work substantially expands the distribution of Tn7-like transposons, defines their evolutionary relationships, and provides a large-scale functional classification of prokaryotic genes mobilized by transposition.

Targeted transposition with Tn7 elements: safe sites, mobile plasmids, CRISPR/Cas and beyond

Transposon Tn7 is notable for the control it exercises over where transposition events are directed. One Tn7 integration pathways recognizes a highly conserved attachment (att) site in the chromosome, while a second pathway specifically recognizes mobile plasmids that facilitate transfer of the element to new hosts. In this review, I discuss newly discovered families of Tn7-like elements with different targeting pathways. Perhaps the most exciting examples are multiple instances where Tn7-like elements have repurposed CRISPR/Cas systems. In these cases, the CRISPR/Cas systems have lost their canonical defensive function to destroy incoming mobile elements; instead, the systems have been naturally adapted to use guide RNAs to specifically direct transposition into these mobile elements. The new families of Tn7-like elements also include a variety of novel att sites in bacterial chromosomes where genome islands can form. Interesting families have also been revealed where proteins described in the prototypic Tn7 element are fused or otherwise repurposed for the new dual activities. This expanded understanding of Tn7-like elements broadens our view of how genetic systems are repurposed and provides potentially exciting new tools for genome modification and genomics. Future opportunities and challenges to understanding the impact of the new families of Tn7-like elements are discussed.

The Tn3-family of Replicative Transposons

Transposons of the Tn3 family form a widespread and remarkably homogeneous group of bacterial transposable elements in terms of transposition functions and an extremely versatile system for mediating gene reassortment and genomic plasticity owing to their modular organization. They have made major contributions to antimicrobial drug resistance dissemination or to endowing environmental bacteria with novel catabolic capacities. Here, we discuss the dynamic aspects inherent to the diversity and mosaic structure of Tn3-family transposons and their derivatives. We also provide an overview of current knowledge of the replicative transposition mechanism of the family, emphasizing most recent work aimed at understanding this mechanism at the biochemical level. Previous and recent data are put in perspective with those obtained for other transposable elements to build up a tentative model linking the activities of the Tn3-family transposase protein with the cellular process of DNA replication, suggesting new lines for further investigation. Finally, we summarize our current view of the DNA site-specific recombination mechanisms responsible for converting replicative transposition intermediates into final products, comparing paradigm systems using a serine recombinase with more recently characterized systems that use a tyrosine recombinase.

Multicopy integration of mini-Tn7 transposons into selected chromosomal sites of a Salmonella vaccine strain

Chromosomal integration of expression modules for transgenes is an important aspect for the development of novel Salmonella vectors. Mini-Tn7 transposons have been used for the insertion of one such module into the chromosomal site attTn7, present only once in most Gram-negative bacteria. However, integration of multiple mini-Tn7 copies might be suitable for expression of appropriate amounts of antigen or combination of different modules. Here we demonstrate that integration of a 9.6 kb mini-Tn7 harbouring the luciferase luxCDABE (lux) occurs at the natural attTn7 site and simultaneously other locations of the Salmonella chromosome, which were engineered using λ-Red recombinase to contain one or two additional artificial attTn7 sites (a-attTn7). Multicopy integration even at closely spaced attTn7 sites was unexpected in light of the previously reported distance-dependent Tn7 target immunity. Integration of multiple copies of a mini-Tn7 containing a gfp cassette resulted in increasing green fluorescence of bacteria. Stable consecutive integration of two mini-Tn7 encoding lacZ and lux was achieved by initial transposition of lacZ-mini-Tn7, subsequent chromosomal insertion of a-attTn7 and a second round of transposition with lux-mini-Tn7. Mini-Tn7 thus constitutes a versatile method for multicopy integration of expression cassettes into the chromosome of Salmonella and possibly other bacteria.

Baculovirus resistance in codling moth is virus isolate-dependent and the consequence of a mutation in viral gene pe38

The baculovirus Cydia pomonella granulovirus (CpGV) is widely applied as a biocontrol agent of codling moth. After field resistance of codling moth populations had been observed against the commercially used Mexican (M) isolate of CpGV, infection experiments of larvae of the resistant codling moth strain CpRR1 showed that several other naturally occurring CpGV isolates (I12, S, E2, and I07) from different geographic origins are still infectious to resistant CpRR1. Whole-genome sequencing and phylogenetic analyses of these geographic CpGV variants revealed that their genomes share only a single common difference from that of CpGV-M, which is a mutation coding for a repeat of 24 nucleotides within the gene pe38; this mutation results in an additional repeat of eight amino acids that appears to be inserted to PE38 of CpGV-M only. Deletion of pe38 from CpGV-M totally abolished virus infection in codling moth cells and larvae, demonstrating that it is an essential gene. When the CpGV-M deletion mutant was repaired with pe38 from isolate CpGV-S, which originated from the commercial product Virosoft and is infectious for the resistant codling moth strain CpRR1, the repaired CpGV-M mutant was found to be fully infectious for CpRR1. Repair using pe38 from CpGV-M restored infectivity for the virus in sensitive codling moth strains, but not in CpRR1. Therefore, we conclude that CpGV resistance of codling moth is directed to CpGV-M but not to other virus isolates. The viral gene pe38 is not only essential for the infectivity of CpGV but it is also the key factor in overcoming CpGV resistance in codling moth.

Tn7

The bacterial transposon Tn7 is distinguished by the levels of control it displays over transposition and its capacity to utilize different kinds of target sites. Transposition is carried out using five transposon-encoded proteins, TnsA, TnsB, TnsC, TnsD, and TnsE, which facilitate transfer of the element while minimizing the chances of inactivating host genes by using two pathways of transposition. One of these pathways utilizes TnsD, which targets transposition into a single site found in bacteria ( attTn7 ), and a second utilizes TnsE, which preferentially directs transposition into plasmids capable of moving between bacteria. Control of transposition involves a heteromeric transposase that consists of two proteins, TnsA and TnsB, and a regulator protein TnsC. Tn7 also has the ability to inhibit transposition into a region already occupied by the element in a process called target immunity. Considerable information is available about the functional interactions of the Tn7 proteins and many of the protein–DNA complexes involved in transposition. Tn7-like elements that encode homologs of all five of the proteins found in Tn7 are common in diverse bacteria, but a newly appreciated larger family of elements appears to use the same core TnsA, TnsB, and TnsC proteins with other putative target site selector proteins allowing different targeting pathways.

The Tn7 transposition regulator TnsC interacts with the transposase subunit TnsB and target selector TnsD

The excision of transposon Tn7 from a donor site and its insertion into its preferred target site, attachment site attTn7, is mediated by four Tn7-encoded transposition proteins: TnsA, TnsB, TnsC, and TnsD. Transposition requires the assembly of a nucleoprotein complex containing all four Tns proteins and the DNA substrates, the donor site containing Tn7, and the preferred target site attTn7. TnsA and TnsB together form the heteromeric Tn7 transposase, and TnsD is a target-selecting protein that binds specifically to attTn7. TnsC is the key regulator of transposition, interacting with both the TnsAB transposase and TnsD-attTn7. We show here that TnsC interacts directly with TnsB, and identify the specific region of TnsC involved in the TnsB-TnsC interaction during transposition. We also show that a TnsC mutant defective in interaction with TnsB is defective for Tn7 transposition both in vitro and in vivo. Tn7 displays cis-acting target immunity, which blocks Tn7 insertion into a target DNA that already contains Tn7. We provide evidence that the direct TnsB-TnsC interaction that we have identified also mediates cis-acting Tn7 target immunity. We also show that TnsC interacts directly with the target selector protein TnsD.

The emerging diversity of transpososome architectures

DNA transposases are enzymes that catalyze the movement of discrete pieces of DNA from one location in the genome to another. Transposition occurs through a series of controlled DNA strand cleavage and subsequent integration reactions that are carried out by nucleoprotein complexes known as transpososomes. Transpososomes are dynamic assemblies which must undergo conformational changes that control DNA breaks and ensure that, once started, the transposition reaction goes to completion. They provide a precise architecture within which the chemical reactions involved in transposon movement occur, but adopt different conformational states as transposition progresses. Their components also vary as they must, at some stage, include target DNA and sometimes even host-encoded proteins. A very limited number of transpososome states have been crystallographically captured, and here we provide an overview of the various structures determined to date. These structures include examples of DNA transposases that catalyze transposition by a cut-and-paste mechanism using an RNaseH-like nuclease catalytic domain, those that transpose using only single-stranded DNA substrates and targets, and the retroviral integrases that carry out an integration reaction very similar to DNA transposition. Given that there are a number of common functional requirements for transposition, it is remarkable how these are satisfied by complex assemblies that are so architecturally different.

Direct interaction between the TnsA and TnsB subunits controls the heteromeric Tn7 transposase

The transposon Tn7 transposase that recognizes the transposon ends and mediates breakage and joining is heteromeric. It contains the Tn7-encoded proteins TnsB, which binds specifically to the transposon ends and carries out breakage and joining at the 3' ends, and TnsA, which carries out breakage at the 5' ends of Tn7. TnsA apparently does not bind specifically to DNA, and we have hypothesized that it is recruited to the ends by interaction with TnsB. In this work, we show that TnsA and TnsB interact directly and identify several TnsA and TnsB amino acids involved in this interaction. We also show that TnsA can stimulate two key activities of TnsB, specific binding to the ends and pairing of the Tn7 ends. The ends of Tn7 are structurally asymmetric (i.e., contain different numbers of TnsB-binding sites), and Tn7 also is functionally asymmetric, inserting into its specific target site, attachment site attTn7 (attTn7) in a single orientation. Moreover, Tn7 elements containing two Tn7 right ends can transpose, but elements with two Tn7 left ends cannot. We show here that TnsA + TnsB are unable to pair the ends of a Tn7 element containing two Tn7 left ends. This pairing defect likely contributes to the inability of Tn7 elements with two Tn7 left ends to transpose.

MiniUIB, a novel minitransposon-based system for stable insertion of foreign DNA into the genomes of Gram-negative and Gram-positive bacteria

Transposition of the insertion sequence (IS) ISPpu12 is actively induced after conjugative interaction. The transposase of this IS can act in trans on structures flanked by inverted repeats similar to those of the transposon. Based on that fact, an ISPpu12-based minitransposon, miniUIB, has been constructed in order to biotechnologically exploit the self-regulation of ISPpu12 and its increased activity after conjugative interaction. Mobilization of the miniUIB structure into the genome of Pseudomonas stutzeri AN10 after conjugative interaction was demonstrated. A single gene, i.e., the kanamycin resistance determinant, or large genetic structures of >12 kb, i.e., alkBFGHJKL and alkST operons of Pseudomonas putida TF4-1L (GPo1), have been easily integrated in P. stutzeri AN10 by an RP4-based delivery system. Therefore, the integration of the alk determinants by use of the miniUIB system has extended the biodegradation capabilities of this strain. Plasmid pJOC100, containing the transposase and regulator genes of ISPpu12 adjacent to the miniUIB structure, was constructed in order to extend the host range of this biotechnologically useful genetic tool to other model and real-world bacteria. The effectiveness of the system for random mutagenesis in a phylogenetic wide range of bacteria and for the insertion of novel functions has been demonstrated, even in successive steps.

Separate structural and functional domains of Tn4430 transposase contribute to target immunity

Like other transposons of the Tn3 family, Tn4430 exhibits target immunity, a process that prevents multiple insertions of the transposon into the same DNA molecule. Immunity is conferred by the terminal inverted repeats of the transposon and is specific to each element of the family, indicating that the transposase TnpA is directly involved in the process.However, the molecular mechanism whereby this protein promotes efficient transposition into permissive targets while preventing transposition into immune targets remains unknown. Here, we demonstrate that both functions of TnpA can be uncoupled from each other by isolating and characterizing mutants that are proficient in transposition (T+) but impaired in immunity (I-). The identified T+/I- mutations are clustered into separate structural and functional domains of TnpA, indicating that different activities of the protein contribute to immunity.Combination of separate mutations had synergistic effects on target immunity but contrasting effects on transposition. One class of mutations was found to stimulate transposition, whereas other mutations appeared to reduce TnpA activity. The data are discussed with respect to alternative models in which TnpA acts as a specific determinant to both establish and respond to immunity.

Target immunity of the Tn3-family transposon Tn4430 requires specific interactions between the transposase and the terminal inverted repeats of the transposon

Specificity of the Tn4430 target immunity signal was examined by fusing the transposase TnpA to the LacI repressor of Escherichia coli. The resulting chimeric proteins failed to impose immunity to DNA targets carrying copies of the lacO operator, though they were proficient in lacO binding in vivo and remained responsive to wild-type immunity conferred by the Tn4430 inverted repeat end. Intriguingly, the presence of lacO repeats within the target was found to strongly influence target site selection by Tn4430, but in a LacI-independent manner.

Architecture of the Tn7 posttransposition complex: an elaborate nucleoprotein structure

Four transposition proteins encoded by the bacterial transposon Tn7, TnsA, TnsB, TnsC, and TnsD, mediate its site- and orientation-specific insertion into the chromosomal site attTn7. To establish which Tns proteins are actually present in the transpososome that executes DNA breakage and joining, we have determined the proteins present in the nucleoprotein product of transposition, the posttransposition complex (PTC), using fluorescently labeled Tns proteins. All four required Tns proteins are present in the PTC in which we also find that the Tn7 ends are paired by protein-protein contacts between Tns proteins bound to the ends. Quantification of the relative amounts of the fluorescent Tns proteins in the PTC indicates that oligomers of TnsA, TnsB, and TnsC mediate Tn7 transposition. High-resolution DNA footprinting of the DNA product of transposition attTn7Colon, two colonsTn7 revealed that about 350 bp of DNA on the transposon ends and on attTn7 contact the Tns proteins. All seven binding sites for TnsB, the component of the transposase that specifically binds the ends and mediates 3' end breakage and joining, are occupied in the PTC. However, the protection pattern of the sites closest to the Tn7 ends in the PTC are different from that observed with TnsB alone, likely reflecting the pairing of the ends and their interaction with the target nucleoprotein complex necessary for activation of the breakage and joining steps. We also observe extensive protection of the attTn7 sequences in the PTC and that alternative DNA structures in substrate attTn7 that are imposed by TnsD are maintained in the PTC.

Mini-Tn7 vectors as genetic tools for gene cloning at a single copy number in an industrially important and phytopathogenic bacteria, Xanthomonas spp

Transposon mini-Tn7 vectors insert into the chromosome of several Gram-negative bacteria in a site-specific manner. Here, we showed the application of mini-Tn7 as single copy site-specific integration vector system for Xanthomonas campestris pv. campestris. The transposition of the mini-Tn7 into the bacterial genome was detected at a Tn7 attachment (attTn7) site located downstream of glmS1. Furthermore, using a newly constructed vector pBBR1FLP2 containing the flipase (FLP) recombinase for site-specific excision of the sequence between the FLP recombinase target (FRT) sites, and a sacB counter selection marker, an unmarked mini-Tn7 insertion mutant was created. Mini-Tn7 insertion did not affect bacterial virulence on the tested plant. The mini-Tn7 and FLP-FRT systems also work well in Xanthomonas oryzae pv. oryzae.

Tn7 elements: engendering diversity from chromosomes to episomes

The bacterial transposon Tn7 maintains two distinct lifestyles, one in horizontally transferred DNA and the other in bacterial chromosomes. Access to these two DNA pools is mediated by two separate target selection pathways. The proteins involved in these pathways have evolved to specifically activate transposition into their cognate target-sites using entirely different recognition mechanisms, but the same core transposition machinery. In this review we discuss how the molecular mechanisms of Tn7-like elements contribute to their diversification and how they affect the evolution of their host genomes. The analysis of over 50 Tn7-like elements provides insight into the evolution of Tn7 and Tn7 relatives. In addition to the genes required for transposition, Tn7-like elements transport a wide variety of genes that contribute to the success of diverse organisms. We propose that by decisively moving between mobile and stationary DNA pools, Tn7-like elements accumulate a broad range of genetic material, providing a selective advantage for diverse host bacteria.

Dissecting the roles of MuB in Mu transposition: ATP regulation of DNA binding is not essential for target delivery

Collaboration between MuA transposase and its activator protein, MuB, is essential for properly regulated transposition. MuB activates MuA catalytic activity, selects target DNA, and stimulates transposition into the selected target site. Selection of appropriate target DNA requires ATP hydrolysis by the MuB ATPase. By fusing MuB to a site-specific DNA-binding protein, the Arc repressor, we generated a MuB variant that could select target DNA independently of ATP. This Arc-MuB fusion protein allowed us to test whether ATP binding and hydrolysis by MuB are necessary for stimulation of transposition into selected DNA, a process termed target delivery. We find that with the fusion proteins, MuB-dependent target delivery occurs efficiently under conditions where ATP hydrolysis is prevented by mutation or use of ADP. In contrast, no delivery was detected in the absence of nucleotide. These data indicate that the ATP- and MuA-regulated DNA-binding activity of MuB is not essential for target delivery but that activation of MuA by MuB strictly requires nucleotide-bound MuB. Furthermore, we find that the fusion protein directs transposition to regions of the DNA within 40-750 bp of its own binding site. Taken together, these results suggest that target delivery by MuB occurs as a consequence of the ability of MuB to stimulate MuA while simultaneously tethering MuA to a selected target DNA. This tethered-activator model provides an attractive explanation for other examples of protein-stimulated control of target site selection.

DNA sequence bias during Tn5 transposition

Transposition is one of the primary mechanisms causing genome instability. This phenomenon is mechanistically related to other DNA rearrangements such as V(D)J recombination and retroviral DNA integration. In the Tn5 system, only one protein, the transposase (Tnp), is required for all of the catalytic steps involved in transposon movement. The complexity involved in moving multiple DNA strands within one active site suggests that, in addition to the specific contacts maintained between Tnp and its recognition sequence, Tnp also interacts with the flanking DNA sequence. Here, we demonstrate that Tnp interacts with the donor DNA region. Tnp protects the donor DNA from DNase I digestion, suggesting that Tnp is in contact with, or otherwise distorts, the donor DNA during synapsis. In addition, changes in the donor DNA sequence within this region alter the affinity of Tnp for DNA by eightfold during synapsis. In vitro selection for more stable synaptic complexes reveals an A/T sequence bias for this region. We further show that certain donor DNA sequences, which favor synapsis, also appear to serve as hot spots for strand transfer. The TTATA donor sequence represents the best site. Most surprising is the fact that this sequence is found within the Tnp recognition sequence. Preference for insertion into a site within the Tnp recognition sequence would effectively inactivate one copy of the element and form clusters of the Tn5 transposon. In addition, the fact that several donor DNA sequences, which favor synapsis, appear to serve as hot spots for transposon insertion suggest that similar criteria may exist for Tnp-donor DNA and Tnp-target DNA interactions.

Alternative interactions between the Tn7 transposase and the Tn7 target DNA binding protein regulate target immunity and transposition

The Tn7 transposon avoids inserting into a target DNA that contains a pre-existing copy of Tn7. This phenomenon, known as 'target immunity', is established when TnsB, a Tn7 transposase subunit, binds to Tn7 sequences in the target DNA and mediates displacement of TnsC, a critical transposase activator, from the DNA. Paradoxically, TnsB-TnsC interactions are also required to promote transposon insertion. We have probed Tn7 target immunity by isolating TnsB mutants that mediate more frequent insertions into a potentially immune target DNA because they fail to provoke dissociation of TnsC from the DNA. We show that a single region of TnsB mediates the TnsB-TnsC interaction that underlies both target immunity and transposition, but that TnsA, the other transposase subunit, channels the TnsB-TnsC interaction toward transposition.

Target immunity during Mu DNA transposition. Transpososome assembly and DNA looping enhance MuA-mediated disassembly of the MuB target complex

The Mu transpososome can distinguish between proximal and distal DNA during the selection of a site for transposition. This phenomenon, termed target immunity, involves MuA-stimulated removal of MuB oligomers from sites near the Mu genome. Using a combination of ensemble and single-molecule fluorescence methods, we show that the MuA tetramer can stably associate with the DNA-bound MuB oligomer and is more efficient than monomeric MuA at stimulating the dissociation of MuB from DNA. In addition, we demonstrate that DNA looping is essential for efficient disassembly of the MuB oligomer. We propose a model in which the MuA tetramer forms a multivalent complex with the MuB oligomer and catalyzes the processive removal of MuB from DNA.

A truncation mutant of the 95-kilodalton subunit of transcription factor IIIC reveals asymmetry in Ty3 integration

Position-specific integration of the retroviruslike element Ty3 near the transcription initiation sites of tRNA genes requires transcription factors IIIB and IIIC (TFIIIB and TFIIIC). Using a genetic screen, we isolated a mutant with a truncated 95-kDa subunit of TFIIIC (TFIIIC95) that reduced the apparent retrotransposition of Ty3 into a plasmid-borne target site between two divergently transcribed tRNA genes. Although TFIIIC95 is conserved and essential, no defect in growth or transcription of tRNAs was detected in the mutant. Steps of the Ty3 life cycle, such as protein expression, proteolytic processing, viruslike particle formation, and reverse transcription, were not affected by the mutation. However, Ty3 integration into a divergent tDNA target occurred exclusively in one orientation in the mutant strain. Investigation of this orientation bias showed that TFIIIC95 and Ty3 integrase interacted in two-hybrid and glutathione S-transferase pulldown assays and that interaction with the mutant TFIIIC95 protein was attenuated. The orientation bias observed here suggests that even for wild-type Ty3, the protein complexes associated with the long terminal repeats are not equivalent in vivo.

Tn7: smarter than we thought

A notable feature of transposable elements--segments of DNA that can move from one position to another in genomes--is that they are highly prevalent, despite the fact that their translocation can result in mutation. The bacterial transposon Tn7 uses an elaborate system of target-site selection pathways that favours the dispersal of Tn7 in diverse hosts as well as minimizing its negative effects.

Selective recognition of pyrimidine motif triplexes by a protein encoded by the bacterial transposon Tn7

The bacterial transposon Tn7 is distinguished among mobile genetic elements by its targeting abilities. Recently, we reported that Tn7 is able to selectively insert adjacent to triple-helical DNA. The binding of TnsC, a Tn7-encoded protein, to the triplex DNA target leads to the specific transposition of Tn7 adjacent to both inter- and intramolecular pyrimidine motif triplexes. Here, we further probe how Tn7 targets triplex DNA. We report that TnsC discriminates between different types of triplexes, showing binding preference for pyrimidine but not for purine motif intermolecular triplex DNA. The binding preferences of TnsC and the Tn7 insertion profiles were obtained using psoralenated, triplex- forming oligonucleotides annealed to plasmid DNAs. Although the presence of psoralen is not required for targeting nor is it alone able to attract TnsC, we show that the location of psoralen within the pyrimidine motif triplex does alter the position of Tn7 insertion relative to the triplex. Comparison between the triplex-targeting pathway and the highly site-specific targeting pathway mediated by the binding of the Tn7-encoded protein, TnsD, to the unique site attTn7, suggests that similar structural features within each target DNA are recognized by TnsC, leading to site-specific transposition. This work demonstrates that a prokaryotic protein involved in the targeting and regulation of Tn7 translocation, TnsC, can selectively recognize pyrimidine motif triplexes.

Anatomy of a preferred target site for the bacterial insertion sequence IS903

Like many transposons the bacterial insertion sequence IS903 was thought to insert randomly. However, using both genetic and statistical approaches, we have derived a target site for IS903 that is used 84% of the time. Computational and genetic analyses of multiple IS903 insertion sites predicted a preferred target consisting of a 21 bp palindromic pattern centered on the 9 bp target duplication generated during transposition. Here we show that targeting can be dissected into four components: the 5 bp flanking sequences, the most important sequences required for site-specific insertion; the 7 bp palindromic core within the target duplication; the dinucleotide pair at the transposon-target junction; and the local DNA context. Finally, using a substrate with multiple target sites we show that a target site is more likely found by a local bind-and-slide model and not by extended DNA tracking.

Analysis of gain-of-function mutants of an ATP-dependent regulator of Tn7 transposition

The bacterial transposon Tn7 is distinguished by its unusual discrimination among targets, being particularly attracted to certain target DNA and actively avoiding other DNA. Tn7 transposition is mediated by the interaction of two alternative transposon-encoded target selection proteins, TnsD and TnsE, with a common core transposition machinery composed of the transposase (TnsAB) and an ATP-dependent DNA-binding protein TnsC. No transposition is observed with wild-type TnsABC. Here, we analyze the properties of two gain-of-function TnsC mutants that allow transposition in the absence of TnsD or TnsE. We find that these TnsC mutants have altered interactions with ATP and DNA that can account for their gain-of-function phenotype. We also show that TnsC is an ATPase and that it directly interacts with the TnsAB transposase. This work provides strong support to the view that TnsC and its ATP state are central to the control of Tn7 transposition.

The nicking step in V(D)J recombination is independent of synapsis: implications for the immune repertoire

In all of the transposition reactions that have been characterized thus far, synapsis of two transposon ends is required before any catalytic steps (strand nicking or strand transfer) occur. In V(D)J recombination, there have been inconclusive data concerning the role of synapsis in nicking. Synapsis between two 12-substrates or between two 23-substrates has not been ruled out in any studies thus far. Here we provide the first direct tests of this issue. We find that immobilization of signals does not affect their nicking, even though hairpinning is affected in a manner reflecting its known synaptic requirement. We also find that nicking is kinetically a unireactant enzyme-catalyzed reaction. Time courses are no different between nicking seen for a 12-substrate alone and a reaction involving both a 12- and a 23-substrate. Hence, synapsis is neither a requirement nor an effector of the rate of nicking. These results establish V(D)J recombination as the first example of a DNA transposition-type reaction in which catalytic steps begin prior to synapsis, and the results have direct implications for the order of the steps in V(D)J recombination, for the contribution of V(D)J recombination nicks to genomic instability, and for the diversification of the immune repertoire.

Transposon Tn7 gene insertion into an evolutionarily conserved human homolog of Escherichia coli attTn7

Escherichia coli transposon Tn7 can integrate into its target DNA sequence, attTn7 at the 3' end of glmS, with high specificity and efficiency. Remarkably, the insertional recognition sequence in the E. coli genome displays a high degree of identity with the corresponding region at the 3' end of the corresponding human gene for glutamine-fructose-6-phosphate transaminase (GFPT), located at 2p13. It was therefore of interest to determine whether Tn7 could recognize the corresponding human sequence, and transpose at that site. Strains of E. coli DH5alpha were prepared carrying the tnsA-E genes on one plasmid, and attTn7 or the human equivalent on a second recipient plasmid within the alpha-complementation fragment of the lacZ gene. Each strain was transformed with a donor plasmid carrying a gentamycin resistance gene within the Tn7L and Tn7R cassettes. Restriction mapping and sequence analysis of recipient plasmids isolated from white colonies demonstrated that Tn7 inserted the gentamycin resistance gene both into the E. coli attTn7 sequence, and into its human counterpart. No nonspecific insertion was observed in a control plasmid containing only the lacZ fragment. These results provide a basis to investigate whether TnsA-D proteins can mediate gene insertion into comparably conserved sites in eukaryotic chromosomes.

Target site selection by Tn7: attTn7 transcription and target activity

The bacterial transposon Tn7 inserts at high frequency into a specific site called attTn7, which is present in the chromosomes of many bacteria. We show here that transcription of a nearby gene, glmS, decreases the frequency of Tn7 insertion into attTn7, thus providing a link between Tn7 transposition and host cell metabolism.

Recognition of triple-helical DNA structures by transposon Tn7

We have found that the bacterial transposon Tn7 can recognize and preferentially insert adjacent to triple-helical nucleic acid structures. Both synthetic intermolecular triplexes, formed through the pairing of a short triplex-forming oligonucleotide on a plasmid DNA, and naturally occurring mirror repeat sequences known to form intramolecular triplexes or H-form DNA are preferential targets for Tn7 insertion in vitro. This target site selectivity depends upon the recognition of the triplex region by a Tn7-encoded ATP-using protein, TnsC, which controls Tn7 target site selection: the interaction of TnsC with the triplex region results in recruitment and activation of the Tn7 transposase. Recognition of a nucleic acid structural motif provides both new information into the factors that influence Tn7's target site selection and broadens its targeting capabilities.

A minimal system for Tn7 transposition: the transposon-encoded proteins TnsA and TnsB can execute DNA breakage and joining reactions that generate circularized Tn7 species

In the presence of ATP and Mg(2+), the bacterial transposon Tn7 translocates via a cut and paste mechanism executed by the transposon-encoded proteins TnsA+TnsB+TnsC+TnsD. We report here that in the presence of Mn(2+), TnsA+TnsB alone can execute the DNA breakage and joining reactions of Tn7 recombination. ATP is not essential in this minimal system, revealing that this cofactor is not directly involved in the chemical steps of recombination. In both the TnsAB and TnsABC+D systems, recombination initiates with double-strand breaks at each transposon end that cut Tn7 away from flanking donor DNA. In the minimal system, breakage occurs predominantly at a single transposon end and the subsequent end-joining reactions are intramolecular, with the exposed 3' termini of a broken transposon end joining near the other end of the Tn7 element in the same donor molecule to form circular transposon species. In contrast, in TnsABC+D recombination, breaks occur at both ends of Tn7 and the two ends join to a target site on a different DNA molecule to form an intermolecular simple insertion. This demonstration of the capacity of TnsAB to execute breakage and joining reactions supports the view that these proteins form the Tn7 transposase.

A simple in vitro Tn7-based transposition system with low target site selectivity for genome and gene analysis

A robust Tn7-based in vitro transposition system is described that displays little target site selectivity, allowing the efficient recovery of many different transposon insertions in target DNAs ranging from small plasmids to cosmids to whole genomes. Two miniTn7 derivatives are described that are useful for the analysis of genes: one a derivative for making translational and transcriptional target gene fusions and the other a derivative that can generate 15 bp (5 amino acid) insertions in target DNAs (proteins).

Mobile DNA elements: controlling transposition with ATP-dependent molecular switches

Nucleotide-binding proteins are often used as molecular switches to control the assembly or activity of macromolecular machines. Recent work has revealed that such molecular switches also regulate the spread of some mobile DNA elements. Bacteriophage Mu and the bacterial transposon Tn7 each use an ATP-dependent molecular switch to select a new site for insertion and to coordinate the assembly of the transposition machinery at that site. Strong parallels between these ATP-dependent transposition proteins and other well-characterized molecular switches, such as Ras and EF-Tu, have emerged.

Insertion sequences

Insertion sequences (ISs) constitute an important component of most bacterial genomes. Over 500 individual ISs have been described in the literature to date, and many more are being discovered in the ongoing prokaryotic and eukaryotic genome-sequencing projects. The last 10 years have also seen some striking advances in our understanding of the transposition process itself. Not least of these has been the development of various in vitro transposition systems for both prokaryotic and eukaryotic elements and, for several of these, a detailed understanding of the transposition process at the chemical level. This review presents a general overview of the organization and function of insertion sequences of eubacterial, archaebacterial, and eukaryotic origins with particular emphasis on bacterial elements and on different aspects of the transposition mechanism. It also attempts to provide a framework for classification of these elements by assigning them to various families or groups. A total of 443 members of the collection have been grouped in 17 families based on combinations of the following criteria: (i) similarities in genetic organization (arrangement of open reading frames); (ii) marked identities or similarities in the enzymes which mediate the transposition reactions, the recombinases/transposases (Tpases); (iii) similar features of their ends (terminal IRs); and (iv) fate of the nucleotide sequence of their target sites (generation of a direct target duplication of determined length). A brief description of the mechanism(s) involved in the mobility of individual ISs in each family and of the structure-function relationships of the individual Tpases is included where available.

A Tn7-like transposon is present in the glmUS region of the obligately chemoautolithotrophic bacterium Thiobacillus ferrooxidans

The region downstream of the Thiobacillus ferrooxidans ATCC 33020 atp operon was examined, and the genes encoding N-acetylglucosamine-1-uridyltransferase (glmU) and glucosamine synthetase (glmS) were found. This atpEFHAGDC-glmUS gene order is identical to that of Escherichia coli. The T. ferrooxidans glmS gene was shown to complement E. coli glmS mutants for growth on minimal medium lacking glucosamine. A Tn7-like transposon, Tn5468, was found inserted into the region immediately downstream of the glmS gene in a manner similar to the site-specific insertion of transposon Tn7 within the termination region of the E. coli glmS gene. Tn5468 was sequenced, and Tn7-like terminal repeat sequences as well as several open reading frames which are related to the Tn7 transposition genes tnsA, tnsB, tnsC, and tnsD were found. Tn5468 is the closest relative of Tn7 to have been characterized to date. Southern blot hybridization indicated that a similar or identical transposon was present in three T. ferrooxidans strains isolated from different parts of the world but not in two Thiobacillus thiooxidans strains or a Leptospirillum ferrooxidans strain. Since T. ferrooxidans is an obligately acidophilic autotroph and E. coli is a heterotroph, ancestors of the Tn7-like transposons must have been active in a variety of physiologically different bacteria so that their descendants are now found in bacteria that occupy very different ecological niches.

Avoiding self: two Tn7-encoded proteins mediate target immunity in Tn7 transposition

The bacterial transposon Tn7 exhibits target immunity, a process that prevents Tn7 from transposing into target DNAs that already contain a copy of the transposon. This work investigates the mechanism of target immunity in vitro. We demonstrate that two Tn7-encoded proteins_TnsB, which binds specifically to the ends of Tn7, and TnsC, the ATP-dependent DNA binding protein_act as a molecular switch to impose immunity on target DNAs containing Tn7 (or just Tn7 ends). TnsC binds to target DNA molecules and communicates with the Tn7 transposition machinery; here we show that target DNAs containing Tn7 ends are also bound and subsequently inactivated by TnsB. Protein-protein interactions between TnsB and TnsC appear to be responsible for this inactivation; the target DNA promotes these interactions by tethering TnsB and TnsC in high local concentration. An attractive model that emerges from this work is that TnsB triggers the dissociation of TnsC from the Tn7 end-containing target DNA; that dissociation depends on TnsC's ability to hydrolyze ATP. We propose that these interactions between TnsB and TnsC not only prevent Tn7 from inserting into itself, but also facilitate the selection of preferred target sites that is the hallmark of Tn7 transposition.

Chromosome and low copy plasmid segregation in E. coli: visual evidence for distinct mechanisms

We have investigated DNA segregation in E. coli by inserting multiple lac operator sequences into the chromosome near the origin of replication (oriC), in the hisC gene, a terminus marker, and into plasmids P1 and F. Expression of a GFP-LacI fusion protein allowed visualization of lac operator localization. oriC was shown to be specifically localized at or near the cell poles, and when duplicated, one copy moved to the site of new pole formation near the site of cell division. In contrast, P1 and F localized to the cell center and on duplication appeared to move rapidly to the quarter positions in the cell. Our analysis suggests that different active processes are involved in movement and localization of the chromosome and of the two plasmids during segregation.