Histologic evaluation of the width of soft tissue necrosis adjacent to carbon dioxide laser incisions

Comparison between contact diode laser with 980 nm and 1470 nm wavelengths for posterior laryngofissure in pigs

To compare two different wavelengths of the surgical contact diode laser (CDL) for producing a posterior laryngofissure in in-vivo pigs. Anesthetized pigs underwent a tracheostomy and an anterior laryngofissure through a cervicotomy. They were randomly selected for the CDL wavelength and Power, according to the peak of Power set at device (980nm wavelength: Ppeak power of 10 W, 15 W, and 20 W, or 1470 nm wavelength: Ppeak 3 W, 5 W, 7 W, 10 W). At the end of the experiment, the laryngotracheal specimen was extracted and sent for histology and morphometry measurements (incision size, depth, area, and lateral thermal damage). Hemodynamic data and arterial blood gases were recorded during the incisions. Statistical analysis of the comparisons between the parameters and groups had a level of significance of p < 0.05. Twenty-six pigs were divided into CDL 980 nm (n = 11) and 1470 nm (n = 15). There was a greater incision area at the thyroid level in the 980 nm CDL and a wider incision at the trachea level, with a larger distance between mucosa borders. There were no significant differences in the area of lateral thermal damage between the two groups and neither difference among the power levels tested. Both wavelengths tested showed similar results in the various combinations of power levels without significant differences in the lateral thermal damage. The posterior laryngofissure incision can be performed by either of the wavelengths at low and medium power levels without great difference on lateral thermal damage.

Injuries of Different Surgical Instruments on the Vocal Folds of Dogs

OBJECTIVE

This study aimed to compare the damage of vocal folds caused by four different surgical instruments: CO2 laser, electrosurgical knife, plasma radiofrequency ablation, and steel knife.

STUDY DESIGN

Randomized controlled study.

METHODS

The CO2 laser, electrosurgical knife, plasma radiofrequency ablation, steel knife, and other instruments were used to simulate the laryngeal microsurgery on experimental dogs. Both total vocal fold resection and punctate ablation were performed. On the day of surgery and 6 days later, the vocal fold tissue from the surgical site was removed for histological evaluation. The extent of vocal fold damage was assessed using the automatic digital pathological scanning system.

RESULTS

We detected varying degrees of damage to the laryngeal tissues. Only the steel knife caused epidermal defects on the vocal fold tissue, while other instruments produced thermal damage of different degrees. Furthermore, the steel knife also showed better and faster healing. The plasma radiofrequency ablation was found to cause more severe thermal burns to vocal folds than other surgical instruments (P < 0.05). Six days postsurgery the inflammatory reaction from the steel knife had basically subsided, with only hyperplasia and tissue repair visible microscopically, showing the best healing degree. On the other hand, the radiofrequency ablation group showed the heaviest inflammatory reaction, indicating relatively poor prognosis (P < 0.05).

CONCLUSION

Compared with the CO2 laser, the electrotome and steel knife showed less damage and better healing, while the plasma radiofrequency ablation showed the most obvious thermal burns to laryngeal and vocal tissues during surgery, with relatively poor healing.

The Impact of Laser Thermal Effect on Histological Evaluation of Oral Soft Tissue Biopsy: Systematic Review

The aim of the study is to review the literature to observe studies that evaluate the extent of the thermal effect of different laser wavelengths on the histological evaluation of oral soft tissue biopsies. An electronic search for published studies was performed on the PubMed and Scopus databases between July 2020 and November 2022. After the selection process, all the included studies were subjected to quality assessment and data extraction processes. A total of 28 studies met the eligibility criteria. The most studied laser was the carbon dioxide (CO₂) laser, followed by the diode laser 940 nm-980 nm. Six studies were focused on each of the Erbium-doped Yttrium Aluminium Garnet (Er:YAG), Neodymium-doped Yttrium Aluminum Garnet (Nd:YAG) lasers, and diode lasers of 808 nm and 445 nm. Three studies were for the Potassium Titanyl Phosphate (KTP) laser, and four studies were for the Erbium, Chromium-doped Yttrium, Scandium, Gallium, and Garnet (Er,Cr:YSGG) laser. The quality and bias assessment revealed that almost all the animal studies were at a low risk of bias (RoB) in the considered domains of the used assessment tool except the allocation concealment domain in the selection bias and the blinding domain in the performance bias, where these domains were awarded an unclear or high score in almost all the included animal studies. For clinical studies, the range of the total RoB score in the comparative studies was 14 to 23, while in the non-comparative studies, it was 11 to 15. Almost all the studies concluded that the thermal effect of different laser wavelengths did not hinder the histological diagnosis. This literature review showed some observations. The thermal effect occurred with different wavelengths and parameters and what should be done is to minimize it by better adjusting the laser parameters. The extension of margins during the collection of laser oral biopsies and the use of laser only in non-suspicious lesions are recommended because of the difficulty of the histopathologist to assess the extension and grade of dysplasia at the surgical margins. The comparison of the thermal effect between different studies was impossible due to the presence of methodological heterogeneity.

Comparison of oral mucosal biopsies done using scalpel and diode lasers: A vivo study

Background:

As dental lasers are becoming more popular in the branch of oral medicine for its various advantages and applications, this study was carried out to evaluate better mode of obtaining oral biopsies which is a common and inevitable procedure for providing final diagnosis in majority of conditions.

Methodology:

In this study, a total of 60 patients who required biopsy for final diagnosis of oral mucosal lesions as part of diagnosis in department of Oral Medicine were selected, out of which 30 were subjected to scalpel biopsies and 30 patients were subjected to diode laser biopsies. A 980 nm Zolar plus diode laser was used for the study. Out of 30 patients who were subjected to laser biopsies, 3W continuous mode settings were used for 15 patients and 3W pulsed mode was used for 15 patients. The specimens were sent to Department of Oral Pathology for histopathological evaluation to provide the final diagnosis. The time taken for each patient, volume of local anesthesia, during operative, postoperative pain scale, and co-relation of provisional and final diagnosis was noted for comparison purpose and the pathologist comments, peripheral tissue damage and artifact's for each slide were noted.

Results:

The study results showed the postoperative pain was comparatively less in diodlaser than scalpel, the lasers were patient friendly as the heammorage was negligible when compared to scalpel and suturing was not required. The pulsed mode in diode laser was advantageous over continuous mode when amount of thermal damage and postoperative pain score was compared.

Conclusion:

The results showed that oral biopsies can be made better using diode lasers, by having thorough knowledge on the device.

Laser Assisted Non-surgical Periodontal Therapy: A Double Blind, Randomized Clinical Trial

The objective of this study was to examine potential benefits of using laser therapy for secular decontamination in conjunction with scaling and root planing in the treatment of chronic periodontitis. The study was performed on 173 teeth in 14 patients in a split-mouth design, one side received scaling and root planing followed by laser therapy using a carbon dioxide (CO2) laser with an ablative handpiece (test group); the contralateral side received scaling and root planing without laser (control group). Clinical and laboratory parameters were evaluated prior to treatment and at 3 and 6 months following therapy; clinical measurements were performed by two blinded examiners. The clinical parameters included measurement of gingival recession (REC), bleeding on probing (BOP), clinical attachment level (CAL), pocket depth (PD), furcation involvement (FUR), and tooth mobility (MOB). Laboratory testing to determine the levels of periodontal pathogens was performed using PCR techniques. The results of the study revealed statistically significant differences in clinical and laboratory parameters at 3 and 6 months after therapy for both test and control groups, but no significant difference was observed between the two groups. However, sites receiving laser therapy tended to show a greater decrease in probing depths, gain in clinical attachment level, and reduced bacterial levels. In conclusion, the overall results of the study suggest a potential benefit of using laser therapy in conjunction with scaling and root planing for the treatment of chronic periodontitis.

Optoacoustic monitoring of cutting efficiency and thermal damage during laser ablation

Successful laser surgery is characterized by a precise cut and effective hemostasis with minimal collateral thermal damage to the adjacent tissues. Consequently, the surgeon needs to control several parameters, such as power, pulse repetition rate, and velocity of movements. In this study we propose utilizing optoacoustics for providing the necessary real-time feedback of cutting efficiency and collateral thermal damage. Laser ablation was performed on a bovine meat slab using a Q-switched Nd-YAG laser (532 nm, 4 kHz, 18 W). Due to the short pulse duration of 7.6 ns, the same laser has also been used for generation of optoacoustic signals. Both the shockwaves, generated due to tissue removal, as well as the normal optoacoustic responses from the surrounding tissue were detected using a single broadband piezoelectric transducer. It has been observed that the rapid reduction in the shockwave amplitude occurs as more material is being removed, indicating decrease in cutting efficiency, whereas gradual decrease in the optoacoustic signal likely corresponds to coagulation around the ablation crater. Further heating of the surrounding tissue leads to carbonization accompanied by a significant shift in the optoacoustic spectra. Our results hold promise for real-time monitoring of cutting efficiency and collateral thermal damage during laser surgery. In practice, this could eventually facilitate development of automatic cut-off mechanisms that will guarantee an optimal tradeoff between cutting and heating while avoiding severe thermal damage to the surrounding tissues.

Comparison of lateral thermal injury and healing of porcine skin incisions performed by CO2-laser, monopolar electrosurgery and radiosurgery: a preliminary study based on histological and immunohistochemical results

BACKGROUND

Despite the wide application of lasers and electrosurgery in dermatology, the pertinent literature provides conflicting data regarding the lateral thermal injury (LTI) associated with these instruments and its effects on wound healing. This study aims to quantitate the LTI produced by CO(2)-laser, monopolar electrosurgery (MES), and radiosurgery (MRS) and determine its effects on the healing process (re-epithelialization and inflammatory response) of incisional wounds.

METHODS

Five adult swine of similar weight (22.8-25 kg) were submitted to standardized full-thickness incisions on the lateral abdominal skin by the above instruments (at settings similar to those used in clinical practice) and scalpel (control group). Full-thickness specimens from the surgical site were harvested immediately afterwards and 48 hours later (days 1 and 3). The animals were euthanized by intravenous administration of propofol and pentobarbital. All specimens were formalin fixed, paraffin embedded, cut, and stained with hematoxylin-eosin to quantitate the extent of LTI and inflammatory infiltration. Sections of day 3 were stained with the MIB-1 monoclonal antibody to detect Ki-67 as a marker of epithelial cell proliferation adjacently to the incisions.

RESULTS

LTI was most extensive in the CO(2)-laser-group but did not differ significantly between MES- and MRS-groups. Immunohistochemistry ascertained significantly greater epithelial cell proliferation in the CO(2)-laser-group. Inflammatory infiltration was significantly greater in the CO(2)-laser-group, when compared with the controls but did not differ significantly between the MES/MRS and control groups.

CONCLUSION

CO(2) laser incisions exhibit more extensive LTI, epithelial cell proliferation, and inflammatory response. Confirmation of these findings requires a greater sample.

Er,CR:YSGG lasers induce fewer dysplastic-like epithelial artefacts than CO2 lasers: an in vivo experimental study on oral mucosa

Our aim was to assess wounds made by lasers (CO(2) and Er,Cr:YSGG) for their epithelial architectural changes and width of damage. We allocated 60 Sprague-Dawley(®) rats into groups: glossectomy by CO(2) laser at 3 different wattages (n=10 in each); glossectomy by Er,Cr:YSGG laser at two different emissions (n=10 in each), and a control group (n=10). Histological examination assessed both prevalence and site of thermal artefacts for each group. Both lasers (CO(2) and Er,Cr:YSGG) caused the same type of cytological artefacts. The 3W Er,Cr:YSGG laser produced the fewest cytological artefacts/specimen, and was significantly different from the other experimental groups: 3W CO(2) laser (95% CI=0.8 to 1.0); the 6W CO(2) laser (95% CI=0.1 to 2.0) and the 10W CO(2) laser (95% CI=1.1 to 3.0). CO(2) lasers (3-10W) generate epithelial damage that can simulate dysplastic changes with cytological atypia that affects mainly the basal and suprabasal layers. Irradiation with Er,CR:YSGG laser (2-4W) produces significantly fewer cellular artefacts and less epithelial damage, which may be potentially useful for biopsy of oral mucosa.

Comparison of conventional surgery and CO2 laser on intraoral soft tissue pathologies and evaluation of the collateral thermal damage

OBJECTIVE

The aim of the study was to compare conventional surgery with carbon dioxide (CO(2)) laser applied on oral soft tissue pathologies and to evaluate the effect of collateral thermal damage on histopathological diagnosis. Anesthesia need, postoperative pain, and intraoperative and postoperative complications were examined as part of the comparison.

METHODS

Forty-three patients (32 female and 11 male) with a mean age of 54 (54 +/- 7.0) requiring soft tissue surgeries were randomly assigned to receive treatment either with conventional surgery using a scalpel or with a CO(2) laser technique. Anesthesia method and need, postoperative pain, systemic pain medications if needed, and intra- and postoperative complications were recorded. Excised tissues were evaluated histopathologically for the effect of thermal damage.

RESULTS

All patients were anesthetized with local anesthesia in the conventional group whereas only 10 (42%) patients needed local anesthesia after topical anesthetic application in the laser group. In the conventional group, 18 (90%) patients need analgesics after the operation, compared with seven (29%) patients in the laser group. No intra- or postoperative complications were seen for either procedure. Histological examination of 39 specimens showed that collateral thermal damage on the incision line did not affect the histopathological diagnosis.

CONCLUSIONS

CO(2) laser is an effective instrument for soft tissue excisional biopsies with minimal intraoperative and postoperative complications and good pain control. CO(2) laser applications are suggested as an alternative method to conventional surgery on oral soft tissues.

Diagnostic clinical aids in oral cancer

Conventional oral exploration (visual and palpation examination) constitutes the current gold standard for oral cancer screening, while biopsy and histopathological examination represents the indispensable study for the detection of cases in patients with an identified lesion. Imaging techniques (DPT, CT, and MRI) are frequently used to supplement the clinical evaluation and staging of the primary tumour and regional lymph nodes. There are also a number of techniques that may contribute to the diagnosis of oral cancer: toluidine blue test has been used as a diagnostic aid for the detection of oral cancer over decades. Recently developed light-based detection systems have progressively improved in sensitivity and specificity, but multicentre controlled studies conducted by general dental practitioners must be designed in order to justify their application. The oral brush biopsy appears to overestimate dysplastic lesions and produces a high number of false-positive results. In the near future, immunological and biochemical alterations in the serum (e.g., circulating immune complexes, carcinoembryonic antigen, squamous cell carcinoma associated antigen, inhibitor of apoptosis, cytokeratin fragments, and annexin A1) as well as specific saliva analysis (e.g., cancer related cytokines, metalloproteinases, epithelial tumour markers, DNA promoter hypermethylation, and saliva micro-RNA) may become important tools for the detection of oral cancer.

Histological evaluation of artifacts in tongue tissue produced by the CO2 laser and the electrotome

OBJECTIVE

The purpose of this study was to investigate the clinical usefulness of laser surgery in pathologic diagnosis following excisional biopsy of human oral mucosa by CO(2) laser and electrotome.

BACKGROUND DATA

When performing pathologic diagnosis and microscopic analysis of specimens excised by the CO(2) laser, there have been concerns about thermal denaturation of the excisional margin that may prevent diagnosis.

MATERIALS AND METHODS

Thirty tongue tissue samples from humans that were surgically resected using a CO(2) laser (continuous wave mode for 10 cases and pulse wave mode for 10 cases) and an electrotome (10 cases) were formalin-fixed and paraffin-embedded. These preserved specimens were then cut into thick sections and subjected to hematoxylin and eosin staining followed by microscopic assessment.

RESULTS

Despite the differences between the CO(2) laser and electrotome methods, similar thermal denaturation, such as carbonization, vacuolar degeneration, and elongation of nuclei, were observed at the excisional margins for both methods. Use of the CO(2) laser, particularly in pulse wave mode, reduced the amount of thermal denaturation significantly (p < 0.01) compared to the electrotome.

CONCLUSION

These results indicate that the CO(2) laser is better than the electrotome as a means of making excisions for performing pathologic diagnosis.

Lasers and soft tissue: 'fixed' soft tissue surgery

Within a general practice setting, there are few benign pathological conditions of the attached or keratinised gingival complex that are not amenable to simple surgical intervention. The majority of surgical procedures are adjunctive to the delivery of restorative dentistry. There is an understandable dogma worldwide towards the management of soft tissues as they interface with restorative procedures. Contemporary teaching, both at undergraduate and postgraduate level, would recognise the need for a period of wound healing and stability, based on scalpel-induced incisional therapy. The use of laser wavelengths, based on predictable evidence-based protocols, has re-defined the surgical management of keratinised mucosa that is bound to the underlying periosteum and bone. This can be seen as being of benefit to the clinician in determining the outcome, and the patient in achieving quality results.

Evaluation of Patient Perceptions After Frenectomy Operations: A Comparison of Carbon Dioxide Laser and Scalpel Techniques

BACKGROUND

A frenum that encroaches on the margin of the gingiva may interfere with plaque removal and cause tension. Frenectomy is the complete removal of the frenum that can be made by scalpels or with soft tissue lasers. The aim of this article was to compare the degree of postoperative pain, such as discomfort and functional complications (eating and speech), experienced by patients after two frenectomy operation techniques.

METHODS

Forty patients requiring frenectomy were randomly assigned to have treatment either with a conventional technique or with a carbon dioxide (CO2) laser. The postoperative pain and functional complication ratings of each patient were recorded using a visual analog scale on days 1 and 7.

RESULTS

The results indicated patients treated with the CO2 laser had less postoperative pain and fewer functional complications (speaking and chewing) (P <0.0001 each) and required fewer analgesics (P <0.001) compared to patients treated with the conventional technique.

CONCLUSIONS

This clinical study indicates that CO2 laser treatment used for frenectomy operations provides better patient perception in terms of postoperative pain and function than that obtained by the scalpel technique. Considering the above advantages, when used correctly, the CO2 laser offers a safe, effective, acceptable, and impressive alternative for frenectomy operations.

Ablation of temporomandibular joint structures of a pig with a fibre-guided 308nm excimer laser light—an in vitro investigation

PURPOSE

The present in vitro investigation was carried out to assess the efficacy of treatment with 308 nm excimer laser radiation applied to the structures of the temporomandibular joint of a pig. Laser parameters suitable to ensure adequate clinical efficiency with only minor thermal damage to the surrounding tissues were to be determined.

MATERIAL AND METHODS

Tissue structures of the temporomandibular joint (cortical and cancellous bone, cartilage, disc and muscle) were extracted from freshly killed pigs and served as specimens. The specimens were embedded in polymethylmethacrylate. The laser light was applied after horizontal sectioning and measurement of thickness. The number of impulses that were necessary to perforate the specimen was counted and the rate of ablation determined. In addition, the irradiated surface was investigated histologically and the degree of tissue alteration was evaluated.

RESULTS

The lowest energy threshold for ablation was found at an energy density of 0.8 J/cm2. Depending on the type of tissue, the maximum rate of ablation was evaluated as 1.7-6.3 microm/pulse. The depth of the thermal alteration to the surrounding tissue was about 30-70 microm.

CONCLUSION

The guidable 308 nm excimer laser light offers a combination of precise tissue ablation with only minimal thermal damage to the surrounding tissue.

Clinical preconditions and treatment modality: effects on pulp surgery outcome

BACKGROUND

The purpose of this research was to evaluate the factors affecting the outcome of localized laser pulp surgery in the canine model.

STUDY DESIGN/MATERIALS AND METHODS

Pulpal exposures 2 mm and 5 mm in diameter were prepared in eight healthy teeth in each of five dogs. The total of 40 teeth were left open to infection from the oral cavity for 3 hours or 72 hours; 2-3 mm of surface pulpal tissue were then removed using a fresh diamond bur or a CO2 laser emitting@9.3 microns, at 3.5 W average power in the Superpulse mode. Teeth were monitored clinically and radiographically by one blinded, pre-standardized clinician for 3 months.

RESULTS

Chi-square test and Fisher's Exact test (2-tail) results associated laser treatment with significantly better clinical and radiographic outcome (P < 0.001). Using regression analysis, duration of pulpal exposure to contamination by the oral environment was identified as primary determinant for treatment outcome within the laser-treated and control groups (P = 0.0018).

CONCLUSION

Clinical preconditions significantly affect the outcome of pulp surgery treatments.

CO2 laser treatment of traumatic pulpal exposures in dogs

BACKGROUND AND OBJECTIVE

Successful non-devitalizing treatment of localized pulpal lesions in mature teeth is not ensured using conventional endodontic techniques. The objective of this study was to evaluate CO2 laser surgical treatment of pulpal exposures in canine patients.

STUDY DESIGN/MATERIALS AND METHODS

17 permanent teeth with pulpal exposures of < or = 48 h duration received localized laser pulp surgery. Laser Parameters: pulse duration: 0.01 s, pulse interval: 1.0 s, spot size: 0.004 cm2, fluence: 276 J/cm2. Exposures were dressed with CaOH and Glass ionomer. Clinical and radiographic evaluations were performed by one blinded clinician 24 and 52 weeks after treatment.

RESULTS

15/17 laser-treated teeth assessed over > or = 1 year post-treatment remained clinically and radiographically healthy.

CONCLUSION

These results demonstrate the feasibility of using the CO2 laser for localized pulp surgery. Further studies must optimize laser parameters and identify the range of clinical pathologies which can be treated using this modality.

Laser irradiation of bone. I. An in vitro study concerning the effects of the CO2 laser on oral mucosa and subjacent bone

The purpose of this study was twofold: first, to evaluate the histologic effects of CO2 laser irradiation on biopsies of porcine oral mucosa and underlying bone under conditions that simulate the applications of the laser during gingival surgery; and second, to evaluate the histologic effects on cortical bone following irradiation with increasing energy densities. Specimens consisting of mucosa and underlying bone were subjected to multiple passes of the laser beam in the same line of incision at energy densities ranging from 240 to 1,032 J/cm2. A second group of specimens consisting only of cortical bone was irradiated by a single pass of the laser at energy densities ranging from 40 to 2,062 J/cm2. In both groups the mean depth of ablation, width of surface damage, and widths of the zones of thermal necrosis and thermal damage were determined. Results showed a direct correlation between increasing energy density and/or number of energy beam passes and increasing depths of ablation and widths of surface damage. Further, more than three passes at 1,032 J/cm2 penetrated the mucosal layer to involve underlying bone. The mean depth of ablation for bone specimens following a single pass of the energy beam ranged from 0.02 mm at 160 J/cm2 to a maximum of 0.75 mm at 2,062 J/cm2. Using those energy densities most common to oral soft tissue surgery, the mean depth of ablation in bone specimens ranged from 0.17 mm at 240 J/cm2 to 0.28 mm at 640 J/cm2 to 0.35 mm at 1,032 J/cm2. All specimens regardless of tissue composition, energy density, or number of energy beam passes exhibited a distinct layer of residual carbonized tissue, a zone of thermal necrosis characterized by tissue coagulation, and a zone of tissue exhibiting thermal damage.

The influence of laser parameter configurations at 9.3 microns on incisional and collateral effects in soft tissue

These investigations were performed to determine histologic and incisional consequences of varying pulse duration, duty cycle, and average powers during laser incision at 9.3 microns in soft tissue. In 19 fresh pigs' jaws six standardized incisions 3 cm long were made per parameter with a template and motorized jig. Laser parameters investigated were average power: 1 to 9 W, duty cycle: 10% to 80%, and pulse duration: 1 to 200 msec. The gated Cw mode was used. Incision width and depth and collateral tissue effects were assessed statistically with general linear procedures. Multiple factors were found to influence the outcome of laser irradiation. Depth of incision correlated positively with average power. Tissue damage correlated strongly and negatively with all three variables. These results demonstrate that a wide range of surgical and collateral effects can be achieved with one specific laser device depending on the parameter configuration selected.

Comparison of full thickness skin graft "take" after excision with the carbon dioxide laser and scalpel

SPECIFIC AIM. To evaluate the take of skin grafts on conventionally prepared beds and on beds prepared by a carbon dioxide laser, with and without abrasion of the bed. SIGNIFICANCE. Graft take is dependent on hemostasis, immobility, and nutrition of the graft. Scalpel excision of the skin graft can be associated with hemostatic difficulties and laser treatment of the skin graft bed can provide hemostasis. Abrasion of the bed after laser treatment may then be a means of opening small lymphatic and blood vessels to maintain the graft. Laser treatment followed by abrasion of the bed may provide an ideal graft base before suturing of the skin graft. MATERIAL AND METHODS. Full-thickness skin grafts were taken with a scalpel at three sites on the dorsal skin of 24 guinea pigs. The three beds were prepared with pressure alone to provide hemostasis, laser vaporization followed by abrasion with gauze to produce pinpoint bleeding, and laser vaporization alone. The original skin from each of the sites was then sutured back in place. At postoperative days 1, 3, 5, 10, 21, and 35 the graft sites were assessed clinically for "take." Laser Doppler measurements were also made to evaluate blood flow. Histologic sections of the three sites were prepared. Immunohistochemical analysis was performed to evaluate cell proliferation and angiogenesis. RESULTS. For the animals sacrificed through day 10 the rate of take for the sites that were not lased was 100%. For the sites that were lased alone and lased and abraded the rate of take was 71% with no difference between the two techniques. The lased sites demonstrated increased inflammatory response and graft necrosis. Immunohistochemical analysis showed increased cellular proliferation and angiogenesis in the bed. DISCUSSION. Grafts take best on a scalpel-prepared bed. Laser preparation of the bed, with or without abrasion, demonstrates decreased "take." Therefore the carbon dioxide laser is not a recommended means to take a graft or prepare the graft bed.

Determination of energy density threshold for laser ablation of bacteria. An in vitro study

The Nd:YAG and CO2 lasers have been shown to be bactericidal at relative low energy densities. However, at energy densities exceeding 120 J/cm2 (CO2) and 200 J/cm2 (Nd:YAG), laser irradiation also causes irreparable root surface damage. The purpose of this study was to determine, in vitro, the energy density threshold at which microbial ablation could be achieved while inflicting the least amount of damage to the root surfaces of human teeth. Pairs of Escherichia coli colonies cultured on broth agar were treated with a CO2 laser using a pulsed waveform at approximate energy densities ranging from 3 to 110 J/cm2. One of each colony-pair was then examined by scanning electron microscopy (SEM) and the other subcultured for viable microbes. Roots of extracted teeth were lightly scaled and treated by CO2 laser, again with pulsed beam using approximate energy densities of 3 to 110 J/cm2: and examined by SEM. Regardless of the level of energy density, residual bacteria could be subcultured from all laser treated microbial colonies. The inability of the laser to completely obliterate microbial colonies was likely due to: depth of energy penetration, difficulty in precisely overlapping beam focal spots, irregular beam profile, and presence of microbes at the periphery of the beam focal spot. The threshold energy density for bacterial obliteration was determined to be 11 J/cm2 and that for root damage was 41 J/cm2. Root damage was evident by charring, crater formation, melt-down and resolidification surface mineral, and increasing surface porosity. The results of this in vitro study indicate that when used at an energy density between 11 and 41 J/cm2 the CO2 laser may destroy microbial colonies without inflicting undue damage to the tooth root surface.

Thermal effects of CO2 laser on the pulpal chamber and enamel of human primary teeth: an in vitro investigation

BACKGROUND AND OBJECTIVE

Thermal effects of direct exposure of the pulp chamber to CO2 laser irradiation were evaluated and potentially safe parameters for its clinical application were determined.

STUDY DESIGN/MATERIALS AND METHODS

Using conventional methods, the pulp chambers of freshly extracted primary cuspids were exposed and then subjected to CO2 laser irradiation at the following parameters: 2, 4, 6, 8, 10, 15, and 20 Watts power settings; 0.76 mm diameter spot size; total energy densities between 4-1,058 J/cm2; exposure time between .01-60 s. Exposures in the continuous wave mode were performed in some specimens. In others, single firings of a .01 s pulse duration and a 1 s pulse interval were conducted. Temperature measurements were conducted using a thermocouple and thermal camera.

RESULTS

Significant statistical differences in maximum temperature rise on enamel were observed in groups that received total energy densities > or = 8 J/cm2 (P < or = 0.01); within the pulp chambers these were observed in groups that used > or = 44 J/cm2 (P < or = 0.01).

CONCLUSION

Parameters appropriate for pulpotomy were observed at energy densities up to 176 J/cm2 in the continuous wave mode and 264 J/cm2 using single pulses, wherein temperature rises below 5.5 degrees C were recorded on tooth surface.

Pulsed laser beam effects on gingiva

The effects of CO2 lasers on human gingiva have been evaluated. Pulsed Nd:YAG lasers have only been available for clinical use in dentistry since 1990. This study evaluated the efficacy of a low-power pulsed laser in removing pocket lining epithelium in humans with moderate periodontitis. 24 specimens of gingival tissue, from 6 patients, were studied microscopically following the application of a pulsed Nd:YAG laser (1064 nm) contact probe with a spotsize of 320 mu. Power settings of 1.25 and 1.75 Watts and a frequency of 20 Hz were used. Treatment time varied from 2 to 3 min. The specimens were fixed and processed in the usual manner. Four representative sections for each tooth were examined with the light microscope at 25 and 100 x magnification. Most sections (83%) exhibited complete removal of epithelium except for traces of viable basal cell remnants at the coronal sulcular margin (17%). The underlying connective tissue demonstrated no evidence of necrosis or carbonization. Morphologic features showed minimal change other than removal of pocket lining epithelium, compared to control sites. The pulsed Nd-YAG laser can remove pocket lining epithelium in moderately deep pockets at 1.25-1.75 W of power.

Carbon dioxide laser excision and vaporization of nonplunging ranulas: a comparison of two treatment protocols

A carbon dioxide laser in a defocused beam was used to vaporize four ranulas and four were treated by a combination of focused beam excision of the dome and vaporization of the wall and base. There was no recurrence in any patient at 6 months and no complications were noted.

Application of the potassium-titanyl-phosphate laser during extraocular muscle surgery: technique and histopathology

We determined laser parameters and delivery system requirements for successful use of the potassium-titanyl-phosphate (KTP) laser for strabismus surgery and its histopathologic effect on extraocular muscle, tendon, sclera, and cornea of human and rabbit eyes. Enucleated cadaver eyes and exenterated rabbit orbital contents were used. Using a 200-microns fiberoptic tip delivery system, varying laser energies were used to perform muscle insertion site and corneal damage, tenotomies, and myotomies. Pulse durations of 0.5 second and energies above 0.8 watt were needed for tenotomy or myotomy. No damage to the surrounding tissues or sclera was observed with laser tenotomy or myotomy performed 0.5 mm from the insertion site. Energy above 0.8 watt applied directly caused full thickness disruption. In comparison to scissor myotomy, the laser provided charring of the superficial tissues. This study shows that the KTP laser can be safely and accurately used for extraocular muscle tenotomy or myotomy.

Current status of lasers in soft tissue dental surgery

The aims of this paper are to briefly describe laser physics, the types of lasers currently available for use on soft tissues focusing primarily on CO2 and Nd:YAG laser energies, the histological effects of lasers on oral tissues, laser safety, the clinical applications of lasers on oral soft tissues, and future directions. Of the two types of lasers currently available for dental applications, both the CO2 and Nd:YAG lasers can be used for frenectomies, ablation of lesions, incisional and excisional biopsies, gingivectomies, gingivoplasties, soft tissue tuberosity reductions, operculum removal, coagulation of graft donor sites, and certain crown lengthening procedures. The advantages of lasers include a relatively bloodless surgical and post-surgical course, minimal swelling and scarring, coagulation, vaporization, and cutting, minimal or no suturing, reduction in surgical time, and, in a majority of cases, much less or no post-surgical pain. CO2 lasers, compared to Nd:YAG are faster for most procedures, with less depth of tissue penetration and a well-documented history. There have been recent reports on the use of the Nd:YAG laser for periodontal scaling, gingival curettage, and root desensitization, but further research needs to be conducted. Both the CO2 and the Nd:YAG laser have limited use in conventional flap therapy.

Effects of coaxial CO2/Nd:YAG irradiation on periodontal wound healing

This study evaluated a coaxial CO2/Nd:YAG laser used during periodontal surgery in mongrel dogs for the purpose of ablating the osseous portions of root surfaces to increase reattachment of soft tissue. Periodontal defects were produced with ligatures of orthodontic wire and elastics. The left mandibular osseous root surfaces were irradiated with a defocused, CW laser beam [power density (PD) = 42.46 W/cm2, energy density (ED) = 424.63 J/cm2]. The left maxillary osseous root surfaces were treated with a beam at twice the energy density [PD = 84.93 W/cm2, ED = 849.3 J/cm2]. The mandibular right quadrant received conventional surgery and the maxillary right quadrant served as the untreated control. Fourteen days after treatment, facial/lingual attached gingivae were scored for soft tissue adherence to bone. Laser irradiation at low ED did not improve soft tissue attachment when compared to conventional treatment. Higher ED irradiation produced significantly less attachment and increased tissue necrosis.

Managing aphthous ulcers: laser treatment applied

The recurrent aphthous ulcer is a common oral ulcerative condition. Therapies are pharmaceutical in nature, remain palliative and do not alleviate pain. Carbon dioxide laser therapy was used to treat a minor form of the ulcer (canker sore); the laser therapy reduced or eliminated the pain and inflammation with normal wound healing.