Functional domains of HIV-1 gag-polyprotein expressed in baculovirus-infected cells

Alpha-helicoidal HEAT-like Repeat Proteins (αRep) Selected as Interactors of HIV-1 Nucleocapsid Negatively Interfere with Viral Genome Packaging and Virus Maturation

A new generation of artificial proteins, derived from alpha-helicoidal HEAT-like repeat protein scaffolds (αRep), was previously characterized as an effective source of intracellular interfering proteins. In this work, a phage-displayed library of αRep was screened on a region of HIV-1 Gag polyprotein encompassing the C-terminal domain of the capsid, the SP1 linker and the nucleocapsid. This region is known to be essential for the late steps of HIV-1 life cycle, Gag oligomerization, viral genome packaging and the last cleavage step of Gag, leading to mature, infectious virions. Two strong αRep binders were isolated from the screen, αRep4E3 (32 kDa; 7 internal repeats) and αRep9A8 (28 kDa; 6 internal repeats). Their antiviral activity against HIV-1 was evaluated in VLP-producer cells and in human SupT1 cells challenged with HIV-1. Both αRep4E3 and αRep9A8 showed a modest but significant antiviral effects in all bioassays and cell systems tested. They did not prevent the proviral integration reaction, but negatively interfered with late steps of the HIV-1 life cycle: αRep4E3 blocked the viral genome packaging, whereas αRep9A8 altered both virus maturation and genome packaging. Interestingly, SupT1 cells stably expressing αRep9A8 acquired long-term resistance to HIV-1, implying that αRep proteins can act as antiviral restriction-like factors.

Reversible aggregation of HIV-1 Gag proteins mediated by nucleic acids

HIV-1 Gag protein is the major structural protein for the assembly of virion particles. Although studies have been carried out using partially purified Gag proteins to investigate the mechanisms of viral particle assembly, the outcomes of an assembly reaction remain controversial. Here we have developed an improved procedure for purification of several untagged retroviral Gag proteins from E. coli to more than 95% purity and characterized Gag assembly in solution. We found that HIV-1 Gag proteins can undergo nucleic acid-dependent aggregation with several unexpected features: (1) they form spherical particles that are as large as microns in diameter; (2) the size of the aggregates vary with the molar ratio between nucleic acids and proteins, with the average size of these particles reaching maximal at a molar ratio of 1:2 between nucleic acids and proteins; and (3) these particles can be efficiently disassembled simply upon addition of excess nucleic acids into the solution, suggesting the presence of an ordered assembly. Single-stranded DNA oligos that are 10 nucleotides or shorter do not support the formation of these particles. Furthermore, the matrix domain of the Gag protein dramatically facilitates the formation of these aggregates. These studies uncover a previously uncharacterized pathway of HIV Gag assembly in vitro, and have implications for HIV-1 Gag assembly and pathogenesis in vivo.

Orchestrating the Selection and Packaging of Genomic RNA by Retroviruses: An Ensemble of Viral and Host Factors

Infectious retrovirus particles contain two copies of unspliced viral RNA that serve as the viral genome. Unspliced retroviral RNA is transcribed in the nucleus by the host RNA polymerase II and has three potential fates: (1) it can be spliced into subgenomic messenger RNAs (mRNAs) for the translation of viral proteins; or it can remain unspliced to serve as either (2) the mRNA for the translation of Gag and Gag-Pol; or (3) the genomic RNA (gRNA) that is packaged into virions. The Gag structural protein recognizes and binds the unspliced viral RNA to select it as a genome, which is selected in preference to spliced viral RNAs and cellular RNAs. In this review, we summarize the current state of understanding about how retroviral packaging is orchestrated within the cell and explore potential new mechanisms based on recent discoveries in the field. We discuss the cis-acting elements in the unspliced viral RNA and the properties of the Gag protein that are required for their interaction. In addition, we discuss the role of host factors in influencing the fate of the newly transcribed viral RNA, current models for how retroviruses distinguish unspliced viral mRNA from viral genomic RNA, and the possible subcellular sites of genomic RNA dimerization and selection by Gag. Although this review centers primarily on the wealth of data available for the alpharetrovirus Rous sarcoma virus, in which a discrete RNA packaging sequence has been identified, we have also summarized the cis- and trans-acting factors as well as the mechanisms governing gRNA packaging of other retroviruses for comparison.

Live-cell observation of cytosolic HIV-1 assembly onset reveals RNA-interacting Gag oligomers

Analysis of the cytosolic HIV-1 Gag fraction in live cells via advanced fluctuation imaging methods reveals potential nucleation steps before membrane-assisted Gag assembly.

Assembly of the Gag polyprotein into new viral particles in infected cells is a crucial step in the retroviral replication cycle. Currently, little is known about the onset of assembly in the cytosol. In this paper, we analyzed the cytosolic HIV-1 Gag fraction in real time in live cells using advanced fluctuation imaging methods and thereby provide detailed insights into the complex relationship between cytosolic Gag mobility, stoichiometry, and interactions. We show that Gag diffuses as a monomer on the subsecond timescale with severely reduced mobility. Reduction of mobility is associated with basic residues in its nucleocapsid (NC) domain, whereas capsid (CA) and matrix (MA) domains do not contribute significantly. Strikingly, another diffusive Gag species was observed on the seconds timescale that oligomerized in a concentration-dependent manner. Both NC- and CA-mediated interactions strongly assist this process. Our results reveal potential nucleation steps of cytosolic Gag fractions before membrane-assisted Gag assembly.

A novel platform for virus-like particle-display of flaviviral envelope domain III: induction of Dengue and West Nile virus neutralizing antibodies

CD16-RIgE is a chimeric human membrane glycoprotein consisting of the CD16 ectodomain fused to the transmembrane domain and cytoplasmic tail of the gamma chain of the high affinity receptor of IgE (RIgE). Coexpression of CD16-RIgE and HIV-1 Pr55Gag polyprotein precursor (Pr55Gag^HIV) in insect cells resulted in the incorporation of CD16-RIgE glycoprotein into the envelope of extracellular virus-like particles (VLPs), a phenomenon known as pseudotyping. Taking advantage of this property, we replaced the CD16 ectodomain of CD16-RIgE by the envelope glycoprotein domain III (DIII) of dengue virus serotype 1 (DENV¹) or West Nile virus Kunjin (WNV^Kun). The two resulting chimeric proteins, DIII-DENV¹-RIgE and DIII-WNV^Kun-RIgE, were addressed to the plasma membrane, exposed at the surface of human and insect cells, and incorporated into extracellular VLPs when coexpressed with Pr55Gag^HIV in insect cells. The DIII domains were accessible at the surface of retroviral VLPs, as shown by their reactivity with specific antibodies, and notably antibodies from patient sera. The DIII-RIgE proteins were found to be incorporated in VLPs made of SIV, MLV, or chimeric MLV-HIV Gag precursors, indicating that DIII-RIgE could pseudotype a wide variety of retroviral VLPs. VLP-displayed DIII were capable of inducing specific neutralizing antibodies against DENV and WNV in mice. Although the neutralization response was modest, our data confirmed the capability of DIII to induce a flavivirus neutralization response, and suggested that our VLP-displayed CD16-RIgE-based platform could be developed as a vaccine vector against different flaviviruses and other viral pathogens.

ESCRT-independent budding of HIV-1 gag virus-like particles from Saccharomyces cerevisiae spheroplasts

Heterologous expression of HIV-1 Gag in a variety of host cells results in its packaging into virus-like particles (VLPs) that are subsequently released into the extracellular milieu. This phenomenon represents a useful tool for probing cellular factors required for viral budding and has contributed to the discovery of roles for ubiquitin ligases and the endosomal sorting complexes required for transport (ESCRTs) in viral budding. These factors are highly conserved throughout eukaryotes and have been studied extensively in the yeast Saccharomyces cerevisiae, a model eukaryote previously utilized as a host for the production of VLPs. We used heterologous expression of HIV Gag in yeast spheroplasts to examine the role of ESCRTs and associated factors (Rsp5, a HECT ubiquitin ligase of the Nedd4 family; Bro1, a homolog of Alix; and Vps4, the AAA-ATPase required for ESCRT function in all contexts/organisms investigated) in the generation of VLPs. Our data reveal: 1) characterized Gag-ESCRT interaction motifs (late domains) are not required for VLP budding, 2) loss of function alleles of the essential HECT ubiquitin ligase Rsp5 do not display defects in VLP formation, and 3) ESCRT function is not required for VLP formation from spheroplasts. These results suggest that the egress of HIV Gag from yeast cells is distinct from the most commonly described mode of exit from mammalian cells, instead mimicking ESCRT-independent VLP formation observed in a subset of mammalian cells. As such, budding of Gag from yeast cells appears to represent ESCRT-independent budding relevant to viral replication in at least some situations. Thus the myriad of genetic and biochemical tools available in the yeast system may be of utility in the study of this aspect of viral budding.

HIV-Gag VLPs presenting trimeric HIV-1 gp140 spikes constitutively expressed in stable double transfected insect cell line

We have previously described the establishment and characterization of a stably transfected insect cell line for the constitutive and efficient expression of Pr55 HIV Gag proteins, which auto-assemble into enveloped Virus-Like Particles (VLPs) released into the cell culture supernatant. Such HIV-Gag VLPs have been shown to elicit a specific systemic humoral response in vivo, proving the appropriate antigenic presentation of the HIV Gag protein to the immune system. Here we describe the establishment of a stable double transfected insect cell line for the constitutive and reproducible production of Pr55Gag-VLPs expressing on their surface trimeric forms of HIV-1 envelope glycoproteins. The persistence of HIV coding genes has been verified in clonal resistant insect cells, the protein expression and conformation has been verified by Western blot analysis. The resulting HIV-VLPs have been visualized by standard transmission electron microscopy and their immunogenicity has been evaluated in vivo. This represents, to our knowledge, the first example of stable double transfected insect cell line for the constitutive production of enveloped HIV-Gag VLPs presenting trimeric HIV-gp140 on their surface.

Baculovirus display of single chain antibody (scFv) using a novel signal peptide

Background

Cells permissive to virus can become refractory to viral replication upon intracellular expression of single chain fragment variable (scFv) antibodies directed towards viral structural or regulatory proteins, or virus-coded enzymes. For example, an intrabody derived from MH-SVM33, a monoclonal antibody against a conserved C-terminal epitope of the HIV-1 matrix protein (MAp17), was found to exert an inhibitory effect on HIV-1 replication.

Results

Two versions of MH-SVM33-derived scFv were constructed in recombinant baculoviruses (BVs) and expressed in BV-infected Sf9 cells, N-myristoylation-competent scFvG2/p17 and N-myristoylation-incompetent scFvE2/p17 protein, both carrying a C-terminal HA tag. ScFvG2/p17 expression resulted in an insoluble, membrane-associated protein, whereas scFvE2/p17 was recovered in both soluble and membrane-incorporated forms. When coexpressed with the HIV-1 Pr55Gag precursor, scFvG2/p17 and scFvE2/p17 did not show any detectable negative effect on virus-like particle (VLP) assembly and egress, and both failed to be encapsidated in VLP. However, soluble scFvE2/p17 isolated from Sf9 cell lysates was capable of binding to its specific antigen, in the form of a synthetic p17 peptide or as Gag polyprotein-embedded epitope. Significant amounts of scFvE2/p17 were released in the extracellular medium of BV-infected cells in high-molecular weight, pelletable form. This particulate form corresponded to BV particles displaying scFvE2/p17 molecules, inserted into the BV envelope via the scFv N-terminal region. The BV-displayed scFvE2/p17 molecules were found to be immunologically functional, as they reacted with the C-terminal epitope of MAp17. Fusion of the N-terminal 18 amino acid residues from the scFvE2/p17 sequence (N18E2) to another scFv recognizing CD147 (scFv-M6-1B9) conferred the property of BV-display to the resulting chimeric scFv-N18E2/M6.

Conclusion

Expression of scFvE2/p17 in insect cells using a BV vector resulted in baculoviral progeny displaying scFvE2/p17. The function required for BV envelope incorporation was carried by the N-terminal octadecapeptide of scFvE2/p17, which acted as a signal peptide for BV display. Fusion of this peptide to the N-terminus of scFv molecules of interest could be applied as a general method for BV-display of scFv in a GP64- and VSV-G-independent manner.

The inhibition of assembly of HIV-1 virus-like particles by 3-O-(3',3'-dimethylsuccinyl) betulinic acid (DSB) is counteracted by Vif and requires its Zinc-binding domain

Background

DSB, the 3-O-(3',3'dimethylsuccinyl) derivative of betulinic acid, blocks the last step of protease-mediated processing of HIV-1 Gag precursor (Pr55Gag), which leads to immature, noninfectious virions. When administered to Pr55Gag-expressing insect cells (Sf9), DSB inhibits the assembly and budding of membrane-enveloped virus-like particles (VLP). In order to explore the possibility that viral factors could modulate the susceptibility to DSB of the VLP assembly process, several viral proteins were coexpressed individually with Pr55Gag in DSB-treated cells, and VLP yields assayed in the extracellular medium.

Results

Wild-type Vif (Vif^wt) restored the VLP production in DSB-treated cells to levels observed in control, untreated cells. DSB-counteracting effect was also observed with Vif mutants defective in encapsidation into VLP, suggesting that packaging and anti-DSB effect were separate functions in Vif. The anti-DSB effect was abolished for VifC133S and VifS116V, two mutants which lacked the zinc binding domain (ZBD) formed by the four H¹⁰⁸C¹¹⁴C¹³³H¹³⁹ coordinates with a Zn atom. Electron microscopic analysis of cells coexpressing Pr55Gag and Vif^wt showed that a large proportion of VLP budded into cytoplasmic vesicles and were released from Sf9 cells by exocytosis. However, in the presence of mutant VifC133S or VifS116V, most of the VLP assembled and budded at the plasma membrane, as in control cells expressing Pr55Gag alone.

Conclusion

The function of HIV-1 Vif protein which negated the DSB inhibition of VLP assembly was independent of its packaging capability, but depended on the integrity of ZBD. In the presence of Vif^wt, but not with ZBD mutants VifC133S and VifS116V, VLP were redirected to a vesicular compartment and egressed via the exocytic pathway.

Chimaeric HIV-1 subtype C Gag molecules with large in-frame C-terminal polypeptide fusions form virus-like particles

HIV-1 Pr55 Gag virus-like particles (VLPs) are strong immunogens with potential as candidate HIV vaccines. VLP immunogenicity can be broadened by making chimaeric Gag molecules: however, VLPs incorporating polypeptides longer than 200 aa fused in frame with Gag have not yet been reported. We constructed a range of gag-derived genes encoding in-frame C-terminal fusions of myristoylation-competent native Pr55Gag and p6-truncated Gag (Pr50Gag) to test the effects of polypeptide length and sequence on VLP formation and morphology, in an insect cell expression system. Fused sequences included a modified reverse transcriptase-Tat-Nef fusion polypeptide (RTTN, 778 aa), and truncated versions of RTTN ranging from 113 aa to 450 aa. Baculovirus-expressed chimaeric proteins were examined by western blot and electron microscopy. All chimaeras formed VLPs which could be purified by sucrose gradient centrifugation. VLP diameter increased with protein MW, from approximately 100 nm for Pr55Gag to approximately 250 nm for GagRTTN. The presence or absence of the Gag p6 region did not obviously affect VLP formation or appearance. GagRT chimaeric particles were successfully used in mice to boost T-cell responses to Gag and RT that were elicited by a DNA vaccine encoding a GagRTTN polypeptide, indicating the potential of such chimaeras to be used as candidate HIV vaccines.

The 3-O-(3’,3’-dimethylsuccinyl) derivative of betulinic acid (DSB) inhibits the assembly of virus-like particles in HIV-1 Gag precursor-expressing cells

Background

The 3- O-(3’,3’-dimethylsuccinyl) derivative of betulinic acid (DSB) blocks HIV-1 maturation by interfering with viral protease (PR) at the capsid (CA)-SP1 cleavage site, a crucial region in HIV-1 morphogenesis.

Methods

We analysed the effect of DSB on the assembly of HIV-1 Gag precursor (Pr55GagHIV) into membrane-enveloped virus-like particles (VLP) in baculovirus-infected cells expressing Pr55GagHIV, in a cellular context devoid of viral PR.

Results

DSB showed a dose-dependent negative effect on VLP assembly, with an IC50∼10 μM. The DSB inhibitory effect was p6-independent and was also observed for intracellular assembly of non-N-myristoylated Gag core-like particles. HIV-1 VLP assembled in the presence of DSB exhibited a lower stability of their inner cores upon membrane delipidation compared with control VLP, suggesting weaker Gag-Gag interactions. DSB also inhibited the assembly of simian immunodeficiency virus SIVmac251 VLP, although with a twofold lower efficacy (IC50∼20 μM). No detectable inhibitory activity was observed for murine leukaemia virus (MLV) VLP; however, fusion of the SP1-NC-p6 domains from HIV-1 to the matrix (MA)-CA domains from MLV conferred DSB sensitivity to the chimaeric Gag precursor Pr72GagMLV–HIV (IC50=30 μM). This observation suggested that the main DSB target on Pr55Gag was the SP1 domain, but the higher degree of DSB resistance for Pr72GagMLV–HIV compared with Pr55GagHIV implied that other upstream Gag region(s) might contribute to DSB reactivity.

Conclusions

Sequence alignment and three-dimensional modelling by homology of the CA-SP1-NC junction in HIV-1, SIVmac251 and Pr72GagMLV–HIV suggested that a higher hydrophilic character of the CA region immediately upstream to the HIV-1 CA-SP1 junction, as occurred in Pr72GagMLV–HIV, correlated with a lower DSB sensitivity.

Molecular and phylogenetic analyses of a new amphotropic murine leukemia virus (MuLV-1313)

BACKGROUND

The amphotropic murine leukemia viruses (MuLV-A's) are naturally occurring, exogenously acquired gammaretroviruses that are indigenous to the Southern California wild mice. These viruses replicate in a wide range of cell types including human cells in vitro and they can cause both hematological and neurological disorders in feral as well as in the inbred laboratory mice. Since MuLV-A's also exhibit discrete interference and neutralization properties, the envelope proteins of these viruses have been extremely useful for studying virus-host cell interactions and as vehicles for transfer of foreign genes into a variety of hosts including human cells. However, the genomic structure of any of the several known MuLV-A's has not been established and the evolutionary relationship of amphotropic retroviruses to the numerous exogenous or endogenous MuLV strains remains elusive. Herein we present a complete genetic structure of a novel amphotropic virus designated MuLV-1313 and demonstrate that this retrovirus together with other MuLV-A's belongs to a distinct molecular, biological and phylogenetic class among the MuLV strains isolated from a large number of the laboratory inbred or feral mice.

RESULTS

The host range of MuLV-1313 is similar to the previously isolated MuLV-A's except that this virus replicates efficiently in mammalian as well as in chicken cells. Compared to ENV proteins of other MuLV-A's (4070A, 1504A and 10A-1), the gp70 protein of MuLV-1313 exhibits differences in its signal peptides and the proline-rich hinge regions. However, the MuLV-1313 envelope protein is totally unrelated to those present in a broad range of murine retroviruses that have been isolated from various inbred and feral mice globally. Genetic analysis of the entire MuLV-1313 genome by dot plot analyses, which compares each nucleotide of one genome with the corresponding nucleotide of another, revealed that the genome of this virus, with the exception of the env gene, is more closely related to the biologically distinct wild mouse ecotropic retrovirus (Cas-Br-E) isolated from another region of the Southern California, than to any of the 15 MuLV strains whose full-length sequences are present in the GenBank. This finding was corroborated by phylogenetic analyses and hierarchical clustering of the entire genomic sequence of MuLV-1313, which also placed all MULV-A's in a genetically distinct category among the large family of retroviruses isolated from numerous mouse strains globally. Likewise, construction of separate dendrograms for each of the Gag, Pol and Env proteins of MuLV-1313 demonstrated that the amphotropic retroviruses belong to a phylogenetically exclusive group of gammaretroviruses compared to all known MuLV strains.

CONCLUSION

The molecular, biological and phylogenetic properties of amphotropic retroviruses including MuLV-1313 are distinct compared to a large family of exogenously- or endogenously-transmitted ecotropic, polytropic and xenotropic MuLV strains of the laboratory and feral mice. Further, both the naturally occurring amphotropic and a biologically discrete ecotropic retrovirus of the Southern California wild mice are more closely related to each other on the evolutionary tree than any other mammalian gammaretrovirus indicating a common origin of these viruses. This is the first report of a complete genomic analysis of a unique group of phylogenetically distinct amphotropic virus.

Rescue of internal scaffold-deleted Mason-Pfizer monkey virus particle production by plasma membrane targeting

The Mason-Pfizer monkey virus (M-PMV) Gag protein follows a morphogenesis pathway in which immature capsids are preassembled within the cytoplasm before interaction with and budding through the plasma membrane. Intracytoplasmic assembly is facilitated by sequences within the p12 domain of Gag that we have termed the Internal Scaffold Domain (ISD). If M-PMV utilizes an ISD then what provides the equivalent function for most other retroviruses that assemble at the plasma membrane? To investigate the possibility that the membrane itself fulfills this role, we have combined functional deletion of the ISD with a mutation that disrupts intracellular targeting or with a plasma membrane targeting signal. By either modification, targeting of ISD-deleted Gag to the plasma membrane restores particle production. These results provide support for a model in which the plasma membrane and the D-type ISD provide an interchangeable scaffold-like function in retrovirus assembly.

Retrovirus budding

The release of retrovirus particles from the infected cell is greatly stimulated by short motifs, known as "late" or "L" domains, present within the Gag precursor protein. Three distinct classes of L domains have been identified; these bear the core sequence: Pro-Thr/Ser-Ala-Pro [P(T/S)AP], Pro-Pro-x-Tyr (PPxY), or Tyr-Pro-x-Leu (YPxL). A number of recent studies have demonstrated that L domains function by interacting with components of the machinery responsible for sorting cellular proteins into the multivesicular body (MVB) pathway. This review traces the history of L domain discovery and characterization, and highlights the relationship between L domain activity, retrovirus release, and the host endosomal sorting machinery.

Recombinant HIV-1 Pr55gag virus-like particles: potent stimulators of innate and acquired immune responses

Several previous reports have clearly demonstrated the strong effectiveness of human immunodeficiency virus (HIV) Gag polyprotein-based virus-like particles (VLP) to stimulate humoral and cellular immune responses in complete absence of additional adjuvants. Yet, the mechanisms underlying the strong immunogenicity of these particulate antigens are still not very clear. However, current reports strongly indicate that these VLP act as "danger signals" to trigger the innate immune system and possess potent adjuvant activity to enhance the immunogenicity of per se only weakly immunogenic peptides and proteins. Here, we review the current understanding of how various particle-associated substances and other impurities may contribute to the observed immune-activating properties of these complex immunogens.

Expression and characterization of Gag protein of HIV-1CN in Pichia pastoris

To express the core protein of HIV-1 of Chinese prevalent strain (HIV-1(CN)) in Pichia pastoris, the full-length gag gene was inserted into the secretory expression vector pHILS1. Linearized recombinant plasmid pHILGAG by SalI was electrotransformed into the yeast strain GS115, and the yeast transformants were identified by PCR. To induce the interest protein to be expressed, the PCR positive transformants were inoculated in the medium of BMGY and BMMY, mRNA of the strain was detected by RT-PCR, and the expressed protein was analyzed by SDS-PAGE, Western blotting and thin layer scanning. mRNA (1.3kb) was amplified by RT-PCR. SDS-PAGE and Western blotting analysis showed that the molecular mass of the expressed protein was 55kDa, which was similar to the expected value, and the expressed protein could react with McAb to HIV-1 p24. Thin layer scanning analysis demonstrated that the whole amount of the expressed protein was approximately 13% of the soluble protein in the supernatant. The recombinant yeast had good genetic stability. The optimal expression conditions of the engineering yeast were as follows: BMMY medium, 80-90% of dissolved oxygen, 1% methanol, and 3-day-cultivation course. Gag proteins were expressed under the optimal expression condition and purified via gel filtration chromatography. The purity of the interest protein was up to 85%. After the purified proteins were inoculated into BALB/c mice, the anti-HIV-1 antibodies in the immunized mice could be detected by Western blotting.

Human immunodeficiency virus type 1 subtype C Gag virus-like particle boost substantially improves the immune response to a subtype C gag DNA vaccine in mice

Human immunodeficiency virus type 1 (HIV-1) subtype C is the predominant HIV in southern Africa, and is the target of a number of recent vaccine candidates. It has been proposed that a heterologous prime/boost vaccination strategy may result in stronger, broader and more prolonged immune responses. Since HIV-1 Gag Pr55 polyprotein can assemble into virus-like particles (VLPs) which have been shown to induce a strong cellular immune response in animals, we showed that a typical southern African subtype C Pr55 protein expressed in insect cells via recombinant baculovirus could form VLPs. We then used the baculovirus-produced VLPs as a boost to a subtype C HIV-1 gag DNA prime vaccination in mice. This study shows that a low dose of HIV-1 subtype C Gag VLPs can significantly boost the immune response to a single subtype C gag DNA inoculation in mice. These results suggest a possible vaccination regimen for humans.

The central domain of the matrix protein of HIV-1: influence on protein structure and virus infectivity

The central region of the matrix protein p17 of HIV-1 is known to be essential during virus assembly. We substituted alanines for amino acid triplets in this region of p17 (amino acid residues 47 to 55: NPG LLE TSE). Introduction of the respective mutations into the gag-coding sequence of HI-proviruses and subsequent transfection into Cos-7 cells led to particle production and release. Exchange of LLE resulted in the production of non-infectious particles. These residues may be important for correct folding and assembly of the processed matrix protein and the production of infectious HIV. In vitro studies of wild-type and mutated matrix proteins using spectroscopic methods (NMR, fluorescence, CD) yielded detailed data about structure and stability. Two-dimensional NMR spectroscopy showed that wild-type and mutant proteins (p17-NPG and p17-TSE) are well folded. Besides structural changes at the mutated site, chemical shift changes indicate small but significant long range structural rearrangements. The stability against chemically and thermally induced unfolding of the mutants p17-NPG and p17-TSE was slightly decreased, while that of p17-LLE was drastically diminished. The alterations have only a local effect on protein folding for the mutants p17-NPG and p17-TSE, and the globular tertiary structure remains nearly unchanged. For p17-LLE, however, the substitutions seem to trigger significant changes in structural elements.

Control of human immunodeficiency virus type-1 protease activity in insect cells expressing Gag-Pol rescues assembly of immature but not mature virus-like particles

Expression of human immunodeficiency virus type 1 (HIV-1) Gag protein in insect cells using baculovirus vectors leads to the abundant production of virus-like particles (VLPs) that represent the immature form of the virus. When Gag-Pol is included, however, VLP production is abolished, a result attributed to premature protease activation degrading the intracellular pool of Gag precursor before particle assembly can occur. As large-scale synthesis of mature noninfectious VLPs would be useful, we have sought to control HIV protease activity in insect cells to give a balance of Gag and Gag-Pol that is compatible with mature particle formation. We show here that intermediate levels of protease activity in insect cells can be attained through site-directed mutagenesis of the protease and through antiprotease drug treatment. However, despite Gag cleavage patterns that mimicked those seen in mammalian cells, VLP synthesis exhibited an essentially all-or-none response in which VLP synthesis occurred but was immature or failed completely. Our data are consistent with a requirement for specific cellular factors in addition to the correct ratio of Gag and Gag-Pol for assembly of mature retrovirus particles in heterologous cell types.

Identification of a host protein essential for assembly of immature HIV-1 capsids

To form an immature HIV-1 capsid, 1,500 HIV-1 Gag (p55) polypeptides must assemble properly along the host cell plasma membrane. Insect cells and many higher eukaryotic cell types support efficient capsid assembly, but yeast and murine cells do not, indicating that host machinery is required for immature HIV-1 capsid formation. Additionally, in a cell-free system that reconstitutes HIV-1 capsid formation, post-translational assembly events require ATP and a subcellular fraction, suggesting a requirement for a cellular ATP-binding protein. Here we identify such a protein (HP68), described previously as an RNase L inhibitor, and demonstrate that it associates post-translationally with HIV-1 Gag in a cell-free system and human T cells infected with HIV-1. Using a dominant negative mutant of HP68 in mammalian cells and depletion-reconstitution experiments in the cell-free system, we demonstrate that HP68 is essential for post-translational events in immature HIV-1 capsid assembly. Furthermore, in cells the HP68-Gag complex is associated with HIV-1 Vif, which is involved in virion morphogenesis and infectivity. These findings support a critical role for HP68 in post-translational events of HIV-1 assembly and reveal a previously unappreciated dimension of host-viral interaction.

The late domain of human immunodeficiency virus type 1 p6 promotes virus release in a cell type-dependent manner

The p6 domain of human immunodeficiency virus type 1 (HIV-1) is located at the C terminus of the Gag precursor protein Pr55(Gag). Previous studies indicated that p6 plays a critical role in HIV-1 particle budding from virus-expressing HeLa cells. In this study, we performed a detailed mutational analysis of the N terminus of p6 to map the sequences required for efficient virus release. We observed that the highly conserved P-T/S-A-P motif located near the N terminus of p6 is remarkably sensitive to change; even conservative mutations in this sequence imposed profound virus release defects in HeLa cells. In contrast, single and double amino acid substitutions outside the P-T/S-A-P motif had no significant effect on particle release. The introduction of stop codons one or two residues beyond the P-T/S-A-P motif markedly impaired virion release, whereas truncation four residues beyond P-T/S-A-P had no effect on particle production in HeLa cells. By examining the effects of p6 mutation in biological and biochemical analyses and by electron microscopy, we defined the role of p6 in particle release and virus replication in a panel of T-cell and adherent cell lines and in primary lymphocytes and monocyte-derived macrophages. We demonstrated that the effects of p6 mutation on virus replication are markedly cell type dependent. Intriguingly, even in T-cell lines and primary lymphocytes in which p6 mutations block virus replication, these changes had little or no effect on particle release. However, p6-mutant particles produced in T-cell lines and primary lymphocytes exhibited a defect in virion-virion detachment, resulting in the production of tethered chains of virions. Virus release in monocyte-derived macrophages was markedly inhibited by p6 mutation. To examine further the cell type-specific virus release defect in HeLa versus T cells, transient heterokaryons were produced between HeLa cells and the Jurkat T-cell line. These heterokaryons display a T-cell-like phenotype with respect to the requirement for p6 in particle release. The results described here define the role of p6 in virus replication in a wide range of cell types and reveal a strong cell type-dependent requirement for p6 in virus particle budding.

Tracking the assembly pathway of human immunodeficiency virus type 1 Gag deletion mutants by immunogold labeling

The Pr55gag gene product of human immunodeficiency virus type 1 (HIV-1) is sufficient to direct the formation of retrovirus-like particles (RVLPs). Recent biochemical evidence has indicated the presence of Gag intermediates in the cytoplasm; however, the Gag assembly process into RVLPs remains incompletely defined. The authors present here the subcellular localization of Gag mutant proteins in BSC40 and Jurkat cells by immunoelectron microscopy (IEM). The full Gag/Pol and Gag precursors, a C-terminal deletion mutant lacking a portion of nucleocapsid (NC), and all p6Gag gave rise to similar levels of RVLPs at the cell surface. A C-terminal deletion of all NC and p6Gag abrogated particle formation, whereas p24 was found in patches at the cell surface. Deletion of matrix (MA) sequences from Gag resulted in intracellular particles, and myristylation was not required for particle formation in the context of the MA deletion. Matrix expression was enhanced with Gag/Pol or Env coexpression as determined by semiquantitative IEM. p24 protein was targeted at vacuolar and mitochondrial membranes, but not at Golgi cisternae. In addition, aggregations of Gag intermediates and RVLPs in the cytoplasm, rough endoplasmic reticulum, cisternae, and mitochondria were noted. These results provide defined in situ evidence that HIV-1 particle assembly occurs in the cytosol in addition to budding at most intracellular membranes.

Interaction of human immunodeficiency virus type 1 Vif with Gag and Gag-Pol precursors: co-encapsidation and interference with viral protease-mediated Gag processing

Interactions of human immunodeficiency virus type 1 (HIV-1) Vif protein with various forms of Gag and Gag-Pol precursors expressed in insect cells were investigated in vivo and in vitro by co-encapsidation, co-precipitation and viral protease (PR)-mediated Gag processing assays. Addressing of Gag to the plasma membrane, its budding as extracellular virus-like particles (VLP) and the presence of the p6 domain were apparently not required for Vif encapsidation, as non-N-myristoylated Deltap6-Gag and Vif proteins were co-encapsidated into intracellular VLP. Encapsidation of Vif occurred at significantly higher copy numbers in extracellular VLP formed from N-myristoylated, budding-competent Gag-Pol precursors harbouring an inactive PR domain or in chimaeric VLP composed of Gag and Gag-Pol precursors compared with the Vif content of Pr55Gag VLP. Vif encapsidation efficiency did not seem to correlate directly with VLP morphology, since these chimaeric VLP were comparable in size and shape to Pr55Gag VLP. Vif apparently inhibited PR-mediated Pr55Gag processing in vitro, with preferential protection of cleavage sites at the MA-CA and CA-NC junctions. Vif was resistant to PR action in vitro under conditions that allowed full Gag processing, and no direct interaction between Vif and PR was detected in vivo or in vitro. This suggested that inhibition by Vif of PR-mediated Gag processing resulted from interaction of Vif with the Gag substrate and not with the enzyme. Likewise, the higher efficiency of Vif encapsidation by Gag-Pol precursor compared with Pr55Gag was probably not mediated by direct binding of Vif to the Gag-Pol-embedded PR domain, but more likely resulted from a particular conformation of the Gag structural domains of the Gag-Pol precursor.

Analysis of Mason-Pfizer monkey virus Gag particles by scanning transmission electron microscopy

Mason-Pfizer monkey virus immature capsids selected from the cytoplasm of baculovirus-infected cells were imaged by scanning transmission electron microscopy. The masses of individual selected Gag particles were measured, and the average mass corresponded to 1,900 to 2,100 Gag polyproteins per particle. A large variation in Gag particle mass was observed within each population measured.

Effect of mutations in Gag on assembly of immature human immunodeficiency virus type 1 capsids in a cell-free system

Studies of HIV-1 capsid formation in a cell-free system revealed that capsid assembly occurs via an ordered series of assembly intermediates and requires host machinery. Here we use this system to examine 12 mutations in HIV-1 Gag that others studied previously in intact cells. With respect to capsid formation, these mutations generally produced the same phenotype in the cell-free system as in cells, indicating the cell-free system's high degree of fidelity. Analysis of assembly intermediates reveals that a mutation in the distal region of CA (322 LDeltaS) and truncations proximal to the second cys-his box in NC block multimerization of Gag at early stages in the cell-free capsid assembly pathway. In contrast, mutations in the region of amino acids 56-68 (located in the proximal portion of MA) inhibit assembly at a later point in the pathway. Other mutations, including truncations distal to the first cys-his box in NC and mutations in the distal half of MA (88HDeltaG, 85YDeltaG, Delta104-115, and Delta115-129), do not affect formation of immature capsids in the cell-free system. These data provide new information on the role of different domains in Gag during the early events of capsid assembly.

Organization of immature human immunodeficiency virus type 1

Immature retrovirus particles contain radially arranged Gag polyproteins in which the N termini lie at the membrane and the C termini extend toward the particle's center. We related image features to the polyprotein domain structure by combining mutagenesis with cryoelectron microscopy and image analysis. The matrix (MA) domain appears as a thin layer tightly associated with the inner face of the viral membrane, separated from the capsid (CA) layer by a low-density region corresponding to its C terminus. Deletion of the entire p6 domain has no effect on the width or spacing of the density layers, suggesting that p6 is not ordered in immature human immunodeficiency virus type 1 (HIV-1). In vitro assembly of a recombinant Gag polyprotein containing only capsid (CA) and nucleocapsid (NC) domains results in the formation of nonenveloped spherical particles which display two layers with density matching that of the CA-NC portion of immature HIV-1 Gag particles. Authentic, immature HIV-1 displays additional surface features and an increased density between the lipid bilayers which reflect the presence of gp41. The other internal features match those of virus-like particles.

Differential budding efficiencies of human T-cell leukemia virus type I (HTLV-I) Gag and Gag-Pro polyproteins from insect and mammalian cells

In this study, we examined the ability of human T-cell leukemia virus type I (HTLV-I) Gag and Gag-Pro to assemble immature virus-like particles (VLPs) and bud from insect and mammalian cells. Transmission electron microscopy of insect cells infected with a recombinant baculovirus carrying the entire gag gene revealed that Pr53(Gag) is targeted to the plasma membrane, where it extensively accumulates and forms electron-dense evaginations. However, no particles could be detected either inside the cells or in the culture supernatants. With the Gag-Pro-expressing construct, we observed HTLV-I-specific cytoplasmic proteolysis of the Gag precursor, but again no particle released in the culture supernatants. Transmission electron microscopic analysis of insect cells expressing Gag-Pro polyprotein revealed large vacuoles in the cytoplasm and no budding particles at the plasma membrane. In contrast, human immunodeficiency virus type 1 Gag polyprotein expressed in insect cells is able to release VLPs. These data showed that unlike other retroviruses, Pr53(Gag) is unable to be released as immature VLPs from insect cells. To determine whether the block in particle budding and release is due to an intrinsic property of Pr53(Gag) or the absence of essential cellular factors in insect cells, we expressed Gag and Gag-Pro polyproteins in human 293 cells. The results indicate that Pr53(Gag) and p24 capsid are released within particles into the culture supernatants of human 293 cells. We found that the myristylation of the N-terminal glycine residue is essential for Gag release. Altogether, these results strongly suggest that the proper assembly of HTLV-I particles is dependent on mammalian host cell factors.

Systematic mutational analysis of the active-site threonine of HIV-1 proteinase: rethinking the "fireman's grip" hypothesis

Aspartic proteinases share a conserved network of hydrogen bonds (termed "fireman's grip"), which involves the hydroxyl groups of two threonine residues in the active site Asp-Thr-Gly triplets (Thr26 in the case of human immunodeficiency virus type 1 (HIV-1) PR). In the case of retroviral proteinases (PRs), which are active as symmetrical homodimers, these interactions occur at the dimer interface. For a systematic analysis of the "fireman's grip," Thr26 of HIV-1 PR was changed to either Ser, Cys, or Ala. The variant enzymes were tested for cleavage of HIV-1 derived peptide and polyprotein substrates. PR(T26S) and PR(T26C) showed similar or slightly reduced activity compared to wild-type HIV-1 PR, indicating that the sulfhydryl group of cysteine can substitute for the hydroxyl of the conserved threonine in this position. PR(T26A), which lacks the "fireman's grip" interaction, was virtually inactive and was monomeric in solution at conditions where wild-type PR exhibited a monomer-dimer equilibrium. All three mutations had little effect when introduced into only one chain of a linked dimer of HIV-1 PR. In this case, even changing both Thr residues to Ala yielded residual activity suggesting that the "fireman's grip" is not essential for activity but contributes significantly to dimer formation. Taken together, these results indicate that the "fireman's grip" is crucial for stabilization of the retroviral PR dimer and for overall stability of the enzyme.

Efficient particle production by minimal Gag constructs which retain the carboxy-terminal domain of human immunodeficiency virus type 1 capsid-p2 and a late assembly domain

The human immunodeficiency virus type 1 (HIV-1) Gag precursor Pr55(gag) by itself is capable of assembling into retrovirus-like particles (VLP). In the present study, we attempted to identify the minimal Gag sequences required for the formation of VLP. Our results show that about 80% of Pr55(gag) can be either deleted or replaced by heterologous sequences without significantly compromising VLP production. The smallest chimeric molecule still able to efficiently form VLP was only about 16 kDa. This minimal Gag construct contained the leucine zipper domain of the yeast transcription factor GCN4 to substitute for the assembly function of nucleocapsid (NC), followed by a P-P-P-P-Y motif to provide late budding (L) domain function, and retained only the myristylation signal and the C-terminal capsid-p2 domain of Pr55(gag). We also show that the L domain function of HIV-1 p6(gag) is not dependent on the presence of an active viral protease and that the NC domain of Pr55(gag) is dispensable for the incorporation of Vpr into VLP.

A cell-line-specific defect in the intracellular transport and release of assembled retroviral capsids

Retrovirus assembly involves a complex series of events in which a large number of proteins must be targeted to a point on the plasma membrane where immature viruses bud from the cell. Gag polyproteins of most retroviruses assemble an immature capsid on the cytoplasmic side of the plasma membrane during the budding process (C-type assembly), but a few assemble immature capsids deep in the cytoplasm and are then transported to the plasma membrane (B- or D-type assembly), where they are enveloped. With both assembly phenotypes, Gag polyproteins must be transported to the site of viral budding in either a relatively unassembled form (C type) or a completely assembled form (B and D types). The molecular nature of this transport process and the host cell factors that are involved have remained obscure. During the development of a recombinant baculovirus/insect cell system for the expression of both C-type and D-type Gag polyproteins, we discovered an insect cell line (High Five) with two distinct defects that resulted in the reduced release of virus-like particles. The first of these was a pronounced defect in the transport of D-type but not C-type Gag polyproteins to the plasma membrane. High Five cells expressing wild-type Mason-Pfizer monkey virus (M-PMV) Gag precursors accumulate assembled immature capsids in large cytoplasmic aggregates similar to a transport-defective mutant (MA-A18V). In contrast, a larger fraction of the Gag molecules encoded by the M-PMV C-type morphogenesis mutant (MA-R55W) and those of human immunodeficiency virus were transported to the plasma membrane for assembly and budding of virions. When pulse-labeled Gag precursors from High Five cells were fractionated on velocity gradients, they sedimented more rapidly, indicating that they are sequestered in a higher-molecular-mass complex. Compared to Sf9 insect cells, the High Five cells also demonstrate a defect in the release of C-type virus particles. These findings support the hypothesis that host cell factors are important in the process of Gag transport and in the release of enveloped viral particles.

Actin associates with the nucleocapsid domain of the human immunodeficiency virus Gag polyprotein

Recently, it was shown that actin molecules are present in human immunodeficiency virus type 1 (HIV-1) particles. We have examined the basis for incorporation and the location of actin molecules within HIV-1 and murine retrovirus particles. Our results show that the retroviral Gag polyprotein is sufficient for actin uptake. Immunolabeling studies demonstrate that actin molecules localize to a specific radial position within the immature particle, clearly displaced from the matrix domain underneath the viral membrane but in proximity to the nucleocapsid (NC) domain of the Gag polyprotein. When virus or subviral Gag particles were disrupted with nonionic detergent, actin molecules remained associated with the disrupted particles. Actin molecules remained in a stable complex with the NC cleavage product (or an NC-RNA complex) after treatment of the disrupted HIV-1 particles with recombinant HIV-1 protease. In contrast, matrix and capsid molecules were released. The same result was obtained when mature HIV-1 particles were disrupted with detergent. Taken together, these results indicate that actin molecules are associated with the NC domain of the viral polyprotein.

Identification of retroviral late domains as determinants of particle size

Retroviral Gag proteins, in the absence of any other viral products, induce budding and release of spherical, virus-like particles from the plasma membrane. Gag-produced particles, like those of authentic retrovirions, are not uniform in diameter but nevertheless fall within a fairly narrow distribution of sizes. For the human immunodeficiency virus type 1 (HIV-1) Gag protein, we recently reported that elements important for controlling particle size are contained within the C-terminal region of Gag, especially within the p6 sequence (L. Garnier, L. Ratner, B. Rovinski, S.-X. Cao, and J. W. Wills, J. Virol. 72:4667-4677, 1998). Deletions and substitutions throughout this sequence result in the release of very large particles. Because the size determinant could not be mapped to any one of the previously defined functions within p6, it seemed likely that its activity requires the overall proper folding of this region of Gag. This left open the possibility of the size determinant residing in a subdomain of p6, and in this study, we examined whether the late domain (the region of Gag that is critical for the virus-cell separation step) is involved in controlling particle size. We found that particles of normal size are produced when p6 is replaced with the totally unrelated late domain sequences from Rous sarcoma virus (contained in its p2b sequence) or equine infectious anemia virus (contained in p9). In addition, we found that the large particles released in the absence of p6 require the entire CA and adjacent spacer peptide sequences, whereas these internal sequences of HIV-1 Gag are not needed for budding (or proper size) when a late domain is present. Thus, it appears the requirements for budding are very different in the presence and absence of p6.

Development of HIV/AIDS vaccine using chimeric gag-env virus-like particles

We attempted to develop a candidate HIV/AIDS vaccine, by using unprocessed HIV-2 gag pr45 precursor protein. We found that a 45 kDa unprocessed HIV-2 gag precursor protein (pr45), with a deletion of a portion of the viral protease, assembles as virus-like particles (VLP). We mapped the functional domain of HIV-2 gag VLP formation in order to find the minimum length of gag protein to form VLP. A series of deletion mutants was constructed by sequentially removing the C-terminal region of HIV-2 gag precursor protein and expressed truncated genes in Spodoptera frugiperda (SF) cells by infecting recombinant baculoviruses. We found that deletion of up to 143 amino acids at the C-terminus of HIV-2 gag, leaving 376 amino acids at the N-terminus of the protein, did not affect VLP formation. There is a proline-rich region at the amino acid positions 373 to 377 of HIV-2 gag, and replacement of these proline residues by site-directed mutagenesis completely abolished VLP assembly. Our data demonstrate that the C-terminal p12 region of HIV-2 gag precursor protein, and zinc finger domains, are dispensable for gag VLP assembly, but the presence of at least one of the three prolines at amino acid positions 373, 375 or 377 of HIV-2NIH-Z is required for VLP formation. Animals immunized with these gag particles produced high titer antibodies and Western blot analyses showed that anti-gag pr45 rabbit sera react with p17, p24 and p55 gag proteins of HIV-1. We then constructed chimeric gag genes, which carry the hypervariable V3 region of HIV-1 gp120, because the V3 loop is known to interact with chemokine receptor as a coreceptor, and known to induce the major neutralizing antibodies and stimulate the cytoxic T lymphocyte responses in humans and mice. We expressed chimeric fusion protein of HIV-2 gag with 3 tandem copies of consensus V3 domain that were derived from 245 different isolates of HIV-1. In addition, we also constructed and expressed chimeric fusion protein that contains HIV-2 gag with V3 domains of HIV-1IIIB, HIV-1MN, HIV-1SF2 and HIV-1RF. The chimeric gag-env particles had a spherical morphology, and the size was slightly larger than that of a gag particle. Immunoprecipitation and Western blot analyses show that these chimeric proteins were recognized by HIV-1 positive human sera and antisera raised against V3 peptides, as well as by rabbit anti-gp120 serum. We obtained virus neutralizing antibodies in rabbits by immunizing these gag-env VLPs. In addition, we found that gag-env chimeric VLPs induce a strong CTL activity against V3 peptide-treated target cells. Our results indicate that V3 peptides from all major clades of HIV-1 carried by HIV-2 gag can be used as a potential HIV/AIDS vaccine.

Construction and characterization of recombinant VLPs and Semliki-Forest virus live vectors for comparative evaluation in the SHIV monkey model

For testing of recombinant virus-like particles (VLPs) in the SHIV monkey model, SIVmac239 Pr56gag precursor-based pseudovirions were modified by HIV-1 gp160 derived peptides. First, well-characterized epitopes from the HIV-1 envelope glycoprotein were inserted into the Pr56gag precursor by replacing defined regions that were shown to be dispensable for virus particle formation. Expression of these chimeric proteins in a baculovirus expression system resulted in efficient assembly and release of non-infectious, hybrid VLPs. In a second approach the HIV-1IIIB external glycoprotein gp120 was covalently linked to an Epstein-Barr virus derived transmembrane domain. Coexpression of the hybrid envelope derivative with the Pr56gag precursor yielded recombinant SIV derived Pr56gag particles with the HIV-1 gp120 firmly anchored on the VLP surface. Immunization of rhesus monkeys with either naked VLPs or VLPs adsorbed to alum induced substantial serum antibody titers and promoted both T helper cell and cytotoxic T lymphocyte responses. Furthermore, priming macaques with the corresponding set of recombinant Semliki-Forest viruses tended to enhance the immunological outcome. Challenge of the immunized monkeys with chimeric SHIV resulted in a clearly accelerated reduction of the plasma viremia as compared to control animals.

In vitro assembly properties of human immunodeficiency virus type 1 Gag protein lacking the p6 domain

Human immunodeficiency virus type 1 (HIV-1) normally assembles into particles of 100 to 120 nm in diameter by budding through the plasma membrane of the cell. The Gag polyprotein is the only viral protein that is required for the formation of these particles. We have used an in vitro assembly system to examine the assembly properties of purified, recombinant HIV-1 Gag protein and of Gag missing the C-terminal p6 domain (Gag Deltap6). This system was used previously to show that the CA-NC fragment of HIV-1 Gag assembled into cylindrical particles. We now report that both HIV-1 Gag and Gag Deltap6 assemble into small, 25- to 30-nm-diameter spherical particles in vitro. The multimerization of Gag Deltap6 into units larger than dimers and the formation of spherical particles required nucleic acid. Removal of the nucleic acid with NaCl or nucleases resulted in the disruption of the multimerized complexes. We conclude from these results that (i) N-terminal extension of HIV-1 CA-NC to include the MA domain results in the formation of spherical, rather than cylindrical, particles; (ii) nucleic acid is required for the assembly and maintenance of HIV-1 Gag Deltap6 virus-like particles in vitro and possibly in vivo; (iii) a wide variety of RNAs or even short DNA oligonucleotides will support assembly; (iv) protein-protein interactions within the particle must be relatively weak; and (v) recombinant HIV-1 Gag Deltap6 and nucleic acid are not sufficient for the formation of normal-sized particles.

Virus maturation by budding

Enveloped viruses mature by budding at cellular membranes. It has been generally thought that this process is driven by interactions between the viral transmembrane proteins and the internal virion components (core, capsid, or nucleocapsid). This model was particularly applicable to alphaviruses, which require both spike proteins and a nucleocapsid for budding. However, genetic studies have clearly shown that the retrovirus core protein, i.e., the Gag protein, is able to form enveloped particles by itself. Also, budding of negative-strand RNA viruses (rhabdoviruses, orthomyxoviruses, and paramyxoviruses) seems to be accomplished mainly by internal components, most probably the matrix protein, since the spike proteins are not absolutely required for budding of these viruses either. In contrast, budding of coronavirus particles can occur in the absence of the nucleocapsid and appears to require two membrane proteins only. Biochemical and structural data suggest that the proteins, which play a key role in budding, drive this process by forming a three-dimensional (cage-like) protein lattice at the surface of or within the membrane. Similarly, recent electron microscopic studies revealed that the alphavirus spike proteins are also engaged in extensive lateral interactions, forming a dense protein shell at the outer surface of the viral envelope. On the basis of these data, we propose that the budding of enveloped viruses in general is governed by lateral interactions between peripheral or integral membrane proteins. This new concept also provides answers to the question of how viral and cellular membrane proteins are sorted during budding. In addition, it has implications for the mechanism by which the virion is uncoated during virus entry.

The role of nucleocapsid of HIV-1 in virus assembly

The role of the nucleocapsid protein of HIV-1 Gag in virus assembly was investigated using Gag truncation mutants, a nucleocapsid deletion mutant, and point mutations in the nucleocapsid region of Gag, in transfected COS cells, and in stable T-cell lines. Consistent with previous investigations, a truncation containing only the matrix and capsid regions of Gag was unable to assemble efficiently into particles; also, the pelletable material released was lighter than the density of wild-type HIV-1. A deletion mutant lacking p7 nucleocapsid but containing the C-terminal p6 protein was also inefficient in particle release and released lighter particles, while a truncation containing only the first zinc finger of p7 could assemble more efficiently into virions. These results clearly show that p7 is indispensable for virus assembly and release. Some point mutations in the N-terminal basic domain and in the basic linker region between the two zinc fingers, which had been previously shown to have reduced RNA binding in vitro [Schmalzbauer, E., Strack, B., Dannull, J., Guehmann, S., and Moelling, K. (1996). J. Virol. 70: 771-777], were shown to reduce virus assembly dramatically when expressed in full-length viral clones. A fusion protein consisting of matrix and capsid fused to a heterologous viral protein known to have nonspecific RNA binding activity [Ribas, J. C., Fujimura, T., and Wickner, R. B. (1994) J. Biol. Chem. 269: 28420-28428] released pelletable material slightly more efficiently than matrix and capsid alone, and these particles had density higher than matrix and capsid alone. These results demonstrate the essential role of HIV-1 nucleocapsid in the virus assembly process and show that the positively charged N terminus of p7 is critical for this role.

HIV-1 gag proteins: diverse functions in the virus life cycle

The Gag proteins of HIV-1, like those of other retroviruses, are necessary and sufficient for the assembly of virus-like particles. The roles played by HIV-1 Gag proteins during the life cycle are numerous and complex, involving not only assembly but also virion maturation after particle release and early postentry steps in virus replication. As the individual Gag domains carry out their diverse functions, they must engage in interactions with themselves, other Gag proteins, other viral proteins, lipid, nucleic acid (DNA and RNA), and host cell proteins. This review briefly summarizes our current understanding of how HIV-1 Gag proteins function in the virus life cycle.

Morphopoietic determinants of HIV-1 Gag particles assembled in baculovirus-infected cells

The determinants for HIV-1 particle morphology were investigated using various deletion and insertion mutants of the Gap precursor protein (Gag) expressed in baculovirus-infected cells and ultrastructural analysis of membrane-enveloped Gag particles under the electron microscope. Five discrete regions were found to influence the size, the variability in dimension, and the sphericity of the particles: (i) the matrix (MA) N-terminal domain, within residues 10-21, the junctions of (ii) MA-CA (capsid), (iii) CA-spacer peptide SP1 and (iv) nucleocapsid (NC)-SP2, and (v) the p6gag C-terminus. Internal regions (ii), (iii), and (iv) contained HIV-1 protease cleavage sites separating major structural domains. No particle assembly was observed for am276, a MA-CA polyprotein mutant lacking the C-terminal third of the CA domain. However, MA-CA domains including the MHR (residues 277-306), or downstream sequence to CA residue 357, resulted in the assembly into tubular or filamentous structures, suggesting a helical symmetry of Gag packing. Mutant amb374, derived from amb 357 by further addition of the heptadecapeptide motif HKARVLAEAMSQVTNSA, overlapping the CA-SP1 junction and the SP1 domain, showed a drastic change in the pattern of Gag assembly, compared to amb357, with formation of spherical particles. These data suggested a novel function for the spacer domain SP1, acting as a spherical shape determinant of the Gag particle which would negatively affect the helical symmetry of assembly of the Gag precursor molecules conferred by the MHR and the downstream CA sequence, within residues 307-357.

N-Terminal extension of human immunodeficiency virus capsid protein converts the in vitro assembly phenotype from tubular to spherical particles

Expression of retroviral Gag polyproteins is sufficient for morphogenesis of virus-like particles with a spherical immature protein shell. Proteolytic cleavage of Gag into the matrix (MA), capsid (CA), nucleocapsid (NC), and p6 domains (in the case of human immunodeficiency virus [HIV]) leads to condensation to the mature cone-shaped core. We have analyzed the formation of spherical or cylindrical particles on in vitro assembly of purified HIV proteins or inside Escherichia coli cells. CA protein alone yielded cylindrical particles, while all N-terminal extensions of CA abolished cylinder formation. Spherical particles with heterogeneous diameters or amorphous protein aggregates were observed instead. Extending CA by 5 amino acids was sufficient to convert the assembly phenotype to spherical particles. Sequences C-terminal of CA were not required for sphere formation. Proteolytic cleavage of N-terminally extended CA proteins prior to in vitro assembly led to the formation of cylindrical particles, while proteolysis of in vitro assembly products caused disruption of spheres but not formation of cylinders. In vitro assembly of CA and extended CA proteins in the presence of cyclophilin A (CypA) at a CA-to-CypA molar ratio of 10:1 yielded significantly longer cylinders and heterogeneous spheres, while higher concentrations of CypA completely disrupted particle formation. We conclude that the spherical shape of immature HIV particles is determined by the presence of an N-terminal extension on the CA domain and that core condensation during virion maturation requires the liberation of the N terminus of CA.

Particle size determinants in the human immunodeficiency virus type 1 Gag protein

The retroviral Gag protein plays the central role in the assembly process and can form membrane-enclosed, virus-like particles in the absence of any other viral products. These particles are similar to authentic virions in density and size. Three small domains of the human immunodeficiency virus type 1 (HIV-1) Gag protein have been previously identified as being important for budding. Regions that lie outside these domains can be deleted without any effect on particle release or density. However, the regions of Gag that control the size of HIV-1 particles are less well understood. In the case of Rous sarcoma virus (RSV), the size determinant maps to the CA (capsid) and adjacent spacer sequences within Gag, but systematic mapping of the HIV Gag protein has not been reported. To locate the size determinants of HIV-1, we analyzed a large collection of Gag mutants. To our surprise, all mutants with defects in the MA (matrix), CA, and the N-terminal part of NC (nucleocapsid) sequences produced dense particles of normal size, suggesting that oncoviruses (RSV) and lentiviruses (HIV-1) have different size-controlling elements. The most important region found to be critical for determining HIV-1 particle size is the p6 sequence. Particles lacking all or small parts of p6 were uniform in size distribution but very large as measured by rate zonal gradients. Further evidence for this novel function of p6 was obtained by placing this sequence at the C terminus of RSV CA mutants that produce heterogeneously sized particles. We found that the RSV-p6 chimeras produced normally sized particles. Thus, we present evidence that the entire p6 sequence plays a role in determining the size of a retroviral particle.

In vitro assembly properties of purified bacterially expressed capsid proteins of human immunodeficiency virus

The Gag polyprotein of retroviruses is sufficient for assembly and budding of virus-like particles from the host cell. In the case of human immunodeficiency virus (HIV), Gag contains the domains matrix, capsid (CA), nucleocapsid (NC) and p6 which are separated by the viral proteinase inside the nascent virion, leading to morphological maturation to yield an infectious virus. In the mature virus, CA forms a capsid shell surrounding the ribonucleoprotein core consisting of NC and the genomic RNA. To define requirements for particle assembly and functional contributions of individual domains, we expressed domains of HIV Gag in Escherichia coli and purified the products to near homogeneity. In vitro assembly of CA, with or without the C-terminally adjacent spacer peptide, yielded tubular structures with a diameter of approximately 55 nm and heterogeneous length. Efficient particle formation required high protein concentration, high salt and neutral to alkaline pH. In contrast, in vitro assembly of CA-NC occurred at a 20-fold lower protein concentration and in low salt, but required addition of RNA. These results suggest that hydrophobic interactions of capsid proteins are sufficient for particle formation while the RNA-binding nucleocapsid domain may concentrate and align structural proteins on the viral genome.

Cryo-electron microscopy reveals ordered domains in the immature HIV-1 particle

BACKGROUND

Human immunodeficiency virus type 1 (HIV-1) is the causative agent of AIDS and the subject of intense study. The immature HIV-1 particle is traditionally described as having a well ordered, icosahedral structure made up of uncleaved Gag protein surrounded by a lipid bilayer containing envelope proteins. Expression of the Gag protein in eukaryotic cells leads to the budding of membranous virus-like particles (VLPs).

RESULTS

We have used cryo-electron microscopy of VLPs from insect cells and lightly fixed, immature HIV-1 particles from human lymphocytes to determine their organization. Both types of particle were heterogeneous in size, varying in diameter from 1200-2600 A. Larger particles appeared to be broken into semi-spherical sectors, each having a radius of curvature of approximately 750 A. No evidence of icosahedral symmetry was found, but local order was evidenced by small arrays of Gag protein that formed facets within the curved sectors. A consistent 270 A radial density was seen, which included a 70 A wide low density feature corresponding to the carboxy-terminal portion of the membrane attached matrix protein and the amino-terminal portion of the capsid protein.

CONCLUSIONS

Immature HIV-1 particles and VLPs both have a multi-sector structure characterized, not by an icosahedral organization, but by local order in which the structures of the matrix and capsid regions of Gag change upon cleavage. We propose a model in which lateral interactions between Gag protein molecules yields arrays that are organized into sectors for budding by RNA.

Increased incorporation of chimeric human immunodeficiency virus type 1 gp120 proteins into Pr55gag virus-like particles by an Epstein-Barr virus gp220/350-derived transmembrane domain

Noninfectious Pr55gag virus-like particles containing high quantities of oligomeric human immunodeficiency virus type 1 (HIV-1) envelope (Env) proteins represent potential candidate immunogens for a vaccine against HIV-1 infection. Thus, chimeric env genes were constructed encoding the HIV-1 exterior glycoprotein gp120 which was covalently linked at different C-terminal positions to a transmembrane domain (TM) from the Epstein-Barr virus (EBV) major Env glycoprotein gp220/ 350. All chimeric Env-TM polypeptides as well as the wild-type HIV Env proteins were equally produced and incorporated at the outer surface of insect cells using the baculovirus expression system. In the presence of coexpressed HIV Pr55gag polyproteins significantly decreased amounts of wild-type Env proteins were presented at the cell surface, whereas the membrane incorporation of the Env-TM chimeras was not affected. Biochemical and immunoelectron microscopical analysis of particles that were efficiently released from these cells displayed the incorporation of both wild-type Env and chimeric Env-TM proteins on the surface of VLPs. However, the quantities of particle-associated chimeric Env-TM proteins exceeded those of incorporated wild-type Env proteins by a factor of 5-10. Chemical cross-linking and subsequent polyacrylamide gel electrophoresis of VLP-entrapped Env proteins revealed that the chimeric Env-TM proteins form homodimers and a higher-order oligomer, similar to that observed for wild-type Env proteins. Thus, the results of this study clearly demonstrate that the replacement of the gp41 transmembrane protein of gp160 by a heterologous, EBV gp220/350-derived membrane anchor provides an effective strategy to incorporate high quantities of oligomeric HIV gp120 proteins on the surface of Pr55gag virus-like particles.

In vitro assembly of virus-like particles with Rous sarcoma virus Gag deletion mutants: identification of the p10 domain as a morphological determinant in the formation of spherical particles

Retroviruses are unusual in that expression of a single protein, Gag, leads to budding of virus-like particles into the extracellular space. We have developed conditions under which virus-like particles are formed spontaneously in vitro from fragments of Rous sarcoma virus (RSV) Gag protein purified after expression in Escherichia coli. The CA-NC fragment of Gag was shown previously to assemble into hollow cylinders (S. Campbell and V. M. Vogt, J. Virol. 69:6487-6497, 1995). We have now extended these studies to larger Gag proteins. In every case examined, assembly into regular structures required RNA. A nearly full-length Gag missing only the C-terminal PR domain, as well as similar proteins missing in addition the N-terminal half of MA, the C-terminal half of MA, the entire MA sequence, or the entire p2 sequence, all assembled into spherical particles resembling RSV in size. By contrast, proteins missing p10 assembled into cylindrical particles like those formed by CA-NC alone. Thin section electron microscopy showed that each of these Gag proteins formed in the expressing E. coli cells particles similar in shape to those seen in vitro. We conclude from these results that neither the sequences required for membrane binding in vivo, near the N terminus of Gag, nor the sequences required for a late step in budding, in the p2 portion of Gag, are essential for formation of virus-like particles in this system. Furthermore, we postulate the existence of a shape-determining sequence in p10, which provides or facilitates interactions required for the growing particle to be constrained to a spherical shape.

A multistep, ATP-dependent pathway for assembly of human immunodeficiency virus capsids in a cell-free system

To understand the mechanism by which human immunodeficiency virus type 1 (HIV) capsids are formed, we have reconstituted the assembly of immature HIV capsids de novo in a cell-free system. Capsid authenticity is established by multiple biochemical and morphologic criteria. Known features of the assembly process are closely reproduced, indicating the fidelity of the cell-free reaction. Assembly is separated into co- and posttranslational phases, and three independent posttranslational requirements are demonstrated: (a) ATP, (b) a detergent-sensitive host factor, and (c) a detergent-insensitive host subcellular fraction that can be depleted and reconstituted. Assembly appears to proceed by way of multiple intermediates whose conversion to completed capsids can be blocked by either ATP depletion or treatment with nondenaturing detergent. Specific subsets of these intermediates accumulate upon expression of various assembly-defective Gag mutants in the cell-free system, suggesting that each mutant is blocked at a particular step in assembly. Furthermore, the accumulation of complexes of similar sizes in cells expressing the corresponding mutants suggests that comparable intermediates may exist in vivo. From these data, we propose a multi-step pathway for the biogenesis of HIV capsids, in which the assembly process can be disrupted at a number of discrete points.

Synthesis and assembly of retrovirus Gag precursors into immature capsids in vitro

The assembly of retroviral particles is mediated by the product of the gag gene; no other retroviral gene products are necessary for this process. While most retroviruses assemble their capsids at the plasma membrane, viruses of the type D class preassemble immature capsids within the cytoplasm of infected cells. This has allowed us to determine whether immature capsids of the prototypical type D retrovirus, Mason-Pfizer monkey virus (M-PMV), can assemble in a cell-free protein synthesis system. We report here that assembly of M-PMV Gag precursor proteins can occur in this in vitro system. Synthesized particles sediment in isopycnic gradients to the appropriate density and in thin-section electron micrographs have a size and appearance consistent with those of immature retrovirus capsids. The in vitro system described in this report appears to faithfully mimic the process of assembly which occurs in the host cell cytoplasm, since M-PMV gag mutants defective in in vivo assembly also fail to assemble in vitro. Likewise, the Gag precursor proteins of retroviruses that undergo type C morphogenesis, Rous sarcoma virus and human immunodeficiency virus, which do not preassemble capsids in vivo, fail to assemble particles in this system. Additionally, we demonstrate, with the use of anti-Gag antibodies, that this cell-free system can be utilized for analysis in vitro of potential inhibitors of retrovirus assembly.

Crystal structures of the trimeric human immunodeficiency virus type 1 matrix protein: implications for membrane association and assembly

The human immunodeficiency virus type 1 (HIV-1) matrix protein forms a structural shell associated with the inner viral membrane and performs other essential functions throughout the viral life cycle. The crystal structure of the HIV-1 matrix protein, determined at 2.3 angstrom resolution, reveals that individual matrix molecules are composed of five major helices capped by a three-stranded mixed beta-sheet. Unexpectedly, the protein assembles into a trimer in three different crystal lattices, burying 1880 angstrom2 of accessible surface area at the trimer interfaces. Trimerization appears to create a large, bipartite membrane binding surface in which exposed basic residues could cooperate with the N-terminal myristoyl groups to anchor the protein on the acidic inner membrane of the virus.