Bacterial leader peptidase 1

Bioinformatic mapping of a more precise Aspergillus niger degradome

Aspergillus niger has the ability to produce a large variety of proteases, which are of particular importance for protein digestion, intracellular protein turnover, cell signaling, flavour development, extracellular matrix remodeling and microbial defense. However, the A. niger degradome (the full repertoire of peptidases encoded by the A. niger genome) available is not accurate and comprehensive. Herein, we have utilized annotations of A. niger proteases in AspGD, JGI, and version 12.2 MEROPS database to compile an index of at least 232 putative proteases that are distributed into the 71 families/subfamilies and 26 clans of the 6 known catalytic classes, which represents ~ 1.64% of the 14,165 putative A. niger protein content. The composition of the A. niger degradome comprises ~ 7.3% aspartic, ~ 2.2% glutamic, ~ 6.0% threonine, ~ 17.7% cysteine, ~ 31.0% serine, and ~ 35.8% metallopeptidases. One hundred and two proteases have been reassigned into the above six classes, while the active sites and/or metal-binding residues of 110 proteases were recharacterized. The probable physiological functions and active site architectures of these peptidases were also investigated. This work provides a more precise overview of the complete degradome of A. niger, which will no doubt constitute a valuable resource and starting point for further experimental studies on the biochemical characterization and physiological roles of these proteases.

Allosteric regulation of rhomboid intramembrane proteolysis

Proteolysis within the lipid bilayer is poorly understood, in particular the regulation of substrate cleavage. Rhomboids are a family of ubiquitous intramembrane serine proteases that harbour a buried active site and are known to cleave transmembrane substrates with broad specificity. In vitro gel and Förster resonance energy transfer (FRET)-based kinetic assays were developed to analyse cleavage of the transmembrane substrate psTatA (TatA from Providencia stuartii). We demonstrate significant differences in catalytic efficiency (kcat/K0.5) values for transmembrane substrate psTatA (TatA from Providencia stuartii) cleavage for three rhomboids: AarA from P. stuartii, ecGlpG from Escherichia coli and hiGlpG from Haemophilus influenzae demonstrating that rhomboids specifically recognize this substrate. Furthermore, binding of psTatA occurs with positive cooperativity. Competitive binding studies reveal an exosite-mediated mode of substrate binding, indicating allostery plays a role in substrate catalysis. We reveal that exosite formation is dependent on the oligomeric state of rhomboids, and when dimers are dissociated, allosteric substrate activation is not observed. We present a novel mechanism for specific substrate cleavage involving several dynamic processes including positive cooperativity and homotropic allostery for this interesting class of intramembrane proteases.

Structure and mechanism of Escherichia coli type I signal peptidase

Type I signal peptidase is the enzyme responsible for cleaving off the amino-terminal signal peptide from proteins that are secreted across the bacterial cytoplasmic membrane. It is an essential membrane bound enzyme whose serine/lysine catalytic dyad resides on the exo-cytoplasmic surface of the bacterial membrane. This review discusses the progress that has been made in the structural and mechanistic characterization of Escherichia coli type I signal peptidase (SPase I) as well as efforts to develop a novel class of antibiotics based on SPase I inhibition. This article is part of a Special Issue entitled: Protein trafficking and secretion in bacteria. Guest Editors: Anastassios Economou and Ross Dalbey.

Unconventional serine proteases: variations on the catalytic Ser/His/Asp triad configuration

Serine proteases comprise nearly one-third of all known proteases identified to date and play crucial roles in a wide variety of cellular as well as extracellular functions, including the process of blood clotting, protein digestion, cell signaling, inflammation, and protein processing. Their hallmark is that they contain the so-called "classical" catalytic Ser/His/Asp triad. Although the classical serine proteases are the most widespread in nature, there exist a variety of "nonclassical" serine proteases where variations to the catalytic triad are observed. Such variations include the triads Ser/His/Glu, Ser/His/His, and Ser/Glu/Asp, and include the dyads Ser/Lys and Ser/His. Other variations are seen with certain serine and threonine peptidases of the Ntn hydrolase superfamily that carry out catalysis with a single active site residue. This work discusses the structure and function of these novel serine proteases and threonine proteases and how their catalytic machinery differs from the prototypic serine protease class.

High Level Expression of a Protein Precursor for Functional Studies

In vitro analyses of type I signal peptidase activities require protein precursors as substrates. Usually, these pre-proteins are expressed in vitro and cleavage of the signal sequence is followed by SDS polyacrylamide gel electrophoresis coupled with autoradiography. Radioactive amino acids have to be incorporated in the expressed protein, since the amount of the in vitro expressed protein is usually very low and processing of the signal peptide cannot be followed by SDS polyacrylamide gel electrophoresis alone. Here we describe a rapid and simple method to express large amounts of a protein precursor in E. coli. We have analyzed the effect of ionophors as well as of azide on the accumulation of expressed protein precursors. Azide blocks the function of SecA and the ionophors dissipate the electrochemical gradient across the cytoplasmic membrane of E. coli. Addition of azide ions resulted in the formation of inclusion bodies, highly enriched with pre-apo-plastocyanine. Plastocyanine is a soluble copper protein, which can be found in the periplasmic space of cyanobacteria as well as in the thylakoid lumen of cyanobacteria and chloroplasts, and the pre-protein contains a cleavable signal sequence at its N-terminus. After purification of cyanobacterial preapo-plastocyanine, its signal sequence can be cleaved off by the E. coli signal peptidase, and protein processing was followed on Coomassie stained SDS polyacrylamide gels. We are optimistic that the presented method can be further developed and applied.

Type I signal peptidases of Gram-positive bacteria

Proteins that are exported from the cytoplasm to the periplasm and outer membrane of Gram-negative bacteria, or the cell wall and growth medium of Gram-positive bacteria, are generally synthesized as precursors with a cleavable signal peptide. During or shortly after pre-protein translocation across the cytoplasmic membrane, the signal peptide is removed by signal peptidases. Importantly, pre-protein processing by signal peptidases is essential for bacterial growth and viability. This review is focused on the signal peptidases of Gram-positive bacteria, Bacillus and Streptomyces species in particular. Evolutionary concepts, current knowledge of the catalytic mechanism, substrate specificity requirements and structural aspects are addressed. As major insights in signal peptidase function and structure have been obtained from studies on the signal peptidase LepB of Escherichia coli, similarities and differences between this enzyme and known Gram-positive signal peptidases are highlighted. Notably, while the incentive for previous research on Gram-positive signal peptidases was largely based on their role in the biotechnologically important process of protein secretion, present-day interest in these essential enzymes is primarily derived from the idea that they may serve as targets for novel anti-microbials.

Crystallographic and Biophysical Analysis of a Bacterial Signal Peptidase in Complex with a Lipopeptide-based Inhibitor

We report here the crystallographic and biophysical analysis of a soluble, catalytically active fragment of the Escherichia coli type I signal peptidase (SPase Delta2-75) in complex with arylomycin A2. The 2.5-A resolution structure revealed that the inhibitor is positioned with its COOH-terminal carboxylate oxygen (O45) within hydrogen bonding distance of all the functional groups in the catalytic center of the enzyme (Ser90 O-gamma, Lys145 N-zeta, and Ser88 O-gamma) and that it makes beta-sheet type interactions with the beta-strands that line each side of the binding site. Ligand binding studies, calorimetry, fluorescence spectroscopy, and stopped-flow kinetics were also used to analyze the binding mode of this unique non-covalently bound inhibitor. The crystal structure was solved in the space group P4(3)2(1)2. A detailed comparison is made to the previously published acyl-enzyme inhibitor complex structure (space group: P2(1)2(1)2) and the apo-enzyme structure (space group: P4(1)2(1)2). Together this work provides insights into the binding of pre-protein substrates to signal peptidase and will prove helpful in the development of novel antibiotics.

Novel lipoglycopeptides as inhibitors of bacterial signal peptidase I

Signal peptidase (SPase) I is responsible for the cleavage of signal peptides of many secreted proteins in bacteria. Because of its unique physiological and biochemical properties, it serves as a potential target for development of novel antibacterial agents. In this study, we report the production, isolation, and structure determination of a family of structurally related novel lipoglycopeptides from a Streptomyces sp. as inhibitors of SPase I. Detailed spectroscopic analyses, including MS and NMR, revealed that these lipoglycopeptides share a common 14-membered cyclic peptide core, an acyclic tripeptide chain, and a deoxy-alpha-mannose sugar, but differ in the degree of oxidation of the N-methylphenylglycine residue and the length and branching of the fatty acyl chain. Biochemical analysis demonstrated that these peptides are potent and competitive inhibitors of SPase I with K(i) 50 to 158 nm. In addition, they showed modest antibacterial activity against a panel of pathogenic Gram-positive and Gram-negative bacteria with minimal inhibitory concentration of 8-64 microm against Streptococcus pneumonniae and 4-8 microm against Escherichia coli. Notably, they mechanistically blocked the protein secretion in whole cells as demonstrated by inhibiting beta-lactamase release from Staphylococcus aureus. Taken together, the present discovery of a family of novel lipoglycopeptides as potent inhibitors of bacterial SPase I may lead to the development of a novel class of broad-spectrum antibiotics.

Cloning and characterization of archaeal type I signal peptidase from Methanococcus voltae

Archaeal protein trafficking is a poorly characterized process. While putative type I signal peptidase genes have been identified in sequenced genomes for many archaea, no biochemical data have been presented to confirm that the gene product possesses signal peptidase activity. In this study, the putative type I signal peptidase gene in Methanococcus voltae was cloned and overexpressed in Escherichia coli, the membranes of which were used as the enzyme source in an in vitro peptidase assay. A truncated, His-tagged form of the M. voltae S-layer protein was generated for use as the substrate to monitor the signal peptidase activity. With M. voltae membranes as the enzyme source, signal peptidase activity in vitro was optimal between 30 and 40 degrees C; it was dependent on a low concentration of KCl or NaCl but was effective over a broad concentration range up to 1 M. Processing of the M. voltae S-layer protein at the predicted cleavage site (confirmed by N-terminal sequencing) was demonstrated with the overexpressed archaeal gene product. Although E. coli signal peptidase was able to correctly process the signal peptide during overexpression of the M. voltae S-layer protein in vivo, the contribution of the E. coli signal peptidase to cleavage of the substrate in the in vitro assay was minimal since E. coli membranes alone did not show significant activity towards the S-layer substrate in in vitro assays. In addition, when the peptidase assays were performed in 1 M NaCl (a previously reported inhibitory condition for E. coli signal peptidase I), efficient processing of the substrate was observed only when the E. coli membranes contained overexpressed M. voltae signal peptidase. This is the first proof of expressed type I signal peptidase activity from a specific archaeal gene product.

In vitro and in vivo self-cleavage of Streptococcus pneumoniae signal peptidase I

We have previously demonstrated that Streptococcus pneumoniae signal peptidase (SPase) I catalyzes a self-cleavage to result in a truncated product, SPase37-204 [Peng, S.B., Wang, L., Moomaw, J., Peery, R.B., Sun, P.M., Johnson, R.B., Lu, J., Treadway, P., Skatrud, P.L. & Wang, Q.M. (2001) J. Bacteriol.183, 621-627]. In this study, we investigated the effect of phospholipid on invitro self-cleavage of S. pneumoniae SPase I. In the presence of phospholipid, the self-cleavage predominantly occurred at one cleavage site between Gly36-His37, whereas the self-cleavage occurred at multiple sites in the absence of phospholipid, and two additional self-cleavage sites, Ala65-His66 and Ala143-Phe144, were identified. All three self-cleavage sites strongly resemble the signal peptide cleavage site and follow the (-1, -3) rule for SPase I recognition. Kinetic analysis demonstrated that self-cleavage is a concentration dependent and intermolecular event, and the activity in the presence of phospholipid is 25-fold higher than that in the absence of phospholipid. Biochemical analysis demonstrated that SPase37-204, the major product of the self-cleavage totally lost activity to cleave its substrates, indicating that the self-cleavage resulted in the inactivation of the enzyme. More importantly, the self-cleavage was demonstrated to be happening in vivo in all the growth phases of S. pneumoniae cells. The bacterial cells keep the active SPase I at the highest level in exponential growth phase, suggesting that the self-cleavage may play an important role in regulating the activity of the enzyme under different conditions.

Crystal structure of a bacterial signal peptidase apoenzyme: implications for signal peptide binding and the Ser-Lys dyad mechanism

We report here the x-ray crystal structure of a soluble catalytically active fragment of the Escherichia coli type I signal peptidase (SPase-(Delta2-75)) in the absence of inhibitor or substrate (apoenzyme). The structure was solved by molecular replacement and refined to 2.4 A resolution in a different space group (P4(1)2(1)2) from that of the previously published acyl-enzyme inhibitor-bound structure (P2(1)2(1)2) (Paetzel, M., Dalbey, R.E., and Strynadka, N.C.J. (1998) Nature 396, 186-190). A comparison with the acyl-enzyme structure shows significant side-chain and main-chain differences in the binding site and active site regions, which result in a smaller S1 binding pocket in the apoenzyme. The apoenzyme structure is consistent with SPase utilizing an unusual oxyanion hole containing one side-chain hydroxyl hydrogen (Ser-88 OgammaH) and one main-chain amide hydrogen (Ser-90 NH). Analysis of the apoenzyme active site reveals a potential deacylating water that was displaced by the inhibitor. It has been proposed that SPase utilizes a Ser-Lys dyad mechanism in the cleavage reaction. A similar mechanism has been proposed for the LexA family of proteases. A structural comparison of SPase and members of the LexA family of proteases reveals a difference in the side-chain orientation for the general base lysine, both of which are stabilized by an adjacent hydroxyl group. To gain insight into how signal peptidase recognizes its substrates, we have modeled a signal peptide into the binding site of SPase. The model is built based on the recently solved crystal structure of the analogous enzyme LexA (Luo, Y., Pfuetzner, R. A., Mosimann, S., Paetzel, M., Frey, E. A., Cherney, M., Kim, B., Little, J. W., and Strynadka, N. C. J. (2001) Cell 106, 1-10) with its bound cleavage site region.

Development of an Internally Quenched Fluorescent Substrate and a Continuous Fluorimetric Assay for Streptococcus pneumoniae Signal Peptidase I

Signal peptidase (SPase) I is responsible for the cleavage of signal peptides of many secreted proteins in bacteria and serves as a potential target for the development of novel antibacterial agents due to its unique physiological and biochemical properties. In this paper, we describe a novel fluorogenic substrate, KLTFGTVK(Abz)PVQAIAGY(NO2)EWL, in which 2-aminobenzoic acid (Abz) and 3-nitrotyrosine (Y(NO2)) were used as the fluorescent donor and acceptor, respectively. The substrate can be cleaved by both Streptococcus pneumoniae and Escherichia coli SPase I. Upon cleavage of the fluorogenic substrate by SPase I, the fluorescent intensity increases and can be monitored continuously by spectrofluorometer. Kinetic analysis with S. pneumoniae SPase I demonstrated that the K(m) value for the substrate is 118.1 microM, and the k(cat) value is 0.032 s(-1). Mass spectrometric analysis and peptide sequencing of the two cleaved products confirmed that the cleavage occurs specifically at the predicted site. More interestingly, the positively charged lysine in the N-terminus of the substrate was demonstrated to be important for effective cleavage. Phospholipids were found to stimulate the cleavage reaction. This stimulation by phospholipids is dependent upon the N-terminal charge of the substrate, indicating that the interaction of the positively charged substrate with anionic phospholipids is important for maintaining the substrate in certain conformation for cleavage. The substrate and assay described here can be readily automated and utilized for the identification of potential antibacterial agents.

Biochemical characterization of signal peptidase I from gram-positive Streptococcus pneumoniae

Bacterial signal peptidase I is responsible for proteolytic processing of the precursors of secreted proteins. The enzymes from gram-negative and -positive bacteria are different in structure and specificity. In this study, we have cloned, expressed, and purified the signal peptidase I of gram-positive Streptococcus pneumoniae. The precursor of streptokinase, an extracellular protein produced in pathogenic streptococci, was identified as a substrate of S. pneumoniae signal peptidase I. Phospholipids were found to stimulate the enzymatic activity. Mutagenetic analysis demonstrated that residues serine 38 and lysine 76 of S. pneumoniae signal peptidase I are critical for enzyme activity and involved in the active site to form a serine-lysine catalytic dyad, which is similar to LexA-like proteases and Escherichia coli signal peptidase I. Similar to LexA-like proteases, S. pneumoniae signal peptidase I catalyzes an intermolecular self-cleavage in vitro, and an internal cleavage site has been identified between glycine 36 and histidine 37. Sequence analysis revealed that the signal peptidase I and LexA-like proteases show sequence homology around the active sites and some common properties around the self-cleavage sites. All these data suggest that signal peptidase I and LexA-like proteases are closely related and belong to a novel class of serine proteases.

The structure and mechanism of bacterial type I signal peptidases. A novel antibiotic target

Type I signal peptidases are essential membrane-bound serine proteases that function to cleave the amino-terminal signal peptide extension from proteins that are translocated across biological membranes. The bacterial signal peptidases are unique serine proteases that utilize a Ser/Lys catalytic dyad mechanism in place of the classical Ser/His/Asp catalytic triad mechanism. They represent a potential novel antibiotic target at the bacterial membrane surface. This review will discuss the bacterial signal peptidases that have been characterized to date, as well as putative signal peptidase sequences that have been recognized via bacterial genome sequencing. We review the investigations into the mechanism of Escherichia coli and Bacillus subtilis signal peptidase, and discuss the results in light of the recent crystal structure of the E. coli signal peptidase in complex with a beta-lactam-type inhibitor. The proposed conserved structural features of Type I signal peptidases give additional insight into the mechanism of this unique enzyme.

The role of the conserved box E residues in the active site of the Escherichia coli type I signal peptidase

Type I signal peptidases are integral membrane proteins that function to remove signal peptides from secreted and membrane proteins. These enzymes carry out catalysis using a serine/lysine dyad instead of the prototypical serine/histidine/aspartic acid triad found in most serine proteases. Site-directed scanning mutagenesis was used to obtain a qualitative assessment of which residues in the fifth conserved region, Box E, of the Escherichia coli signal peptidase I are critical for maintaining a functional enzyme. First, we find that there is no requirement for activity for a salt bridge between the invariant Asp-273 and the Arg-146 residues. In addition, we show that the conserved Ser-278 is required for optimal activity as well as conserved salt bridge partners Asp-280 and Arg-282. Finally, Gly-272 is essential for signal peptidase I activity, consistent with it being located within van der Waals proximity to Ser-278 and general base Lys-145 side-chain atoms. We propose that replacement of the hydrogen side chain of Gly-272 with a methyl group results in steric crowding, perturbation of the active site conformation, and specifically, disruption of the Ser-90/Lys-145 hydrogen bond. A refined model is proposed for the catalytic dyad mechanism of signal peptidase I in which the general base Lys-145 is positioned by Ser-278, which in turn is held in place by Asp-280.

Characterization of monoclonal antibodies to the 44-kilodalton major outer membrane protein of the human granulocytic ehrlichiosis agent

The major outer membrane proteins (OMPs) of the human granulocytic ehrlichiosis (HGE) agent, with molecular sizes of 44 to 47 kDa, are immunodominant antigens in human infection. Monoclonal antibodies (MAbs) to the OMPs were made by immunizing BALB/c mice with the purified HGE agent and then by fusing spleen cells with myeloma cells. The immunologic specificities of three MAbs (3E65, 5C11, and 5D13) were examined with five human HGE agent isolates and one tick isolate. By Western blot analysis, all three MAbs recognized the HGE agent but not Ehrlichia chaffeensis, Ehrlichia sennetsu, Ehrlichia canis, or their host cells. MAb 3E65 reacted with a 44-kDa protein in the homologous human isolate but not in the remaining five isolates. The two remaining MAbs recognized proteins with molecular sizes of 44 to 47 kDa in all six isolates. Western blot results with the OMP fraction of the six isolates were consistent with results with the whole HGE agent. Immunofluorescent-antibody staining and immunogold labeling with these MAbs showed that these antigens were primarily present on the membrane of the HGE agent. MAbs 5C11 and 5D13 recognized the recombinant 44-kDa protein by Western immunoblot analysis, but MAb 3E65 did not. Passive immunization with MAb 3E65 was more effective in protecting mice from HGE agent infection than with MAbs 5C11 and 5D13. These MAbs would be useful for analyzing the role of the major OMP antigens in HGE agent infection and for serodiagnosis.

Factors limiting display of foreign peptides on the major coat protein of filamentous bacteriophage capsids and a potential role for leader peptidase

Many small peptides can be displayed on every copy of the major coat protein in recombinant filamentous bacteriophages but larger peptides can only be accommodated in hybrid virions mixed with wild-type protein subunits. A peptide insert of 12 residues capable of display at high copy number in a hybrid virion was found to be incapable of supporting recombinant virion assembly, a defect that could not be overcome by over-expressing leader peptidase in the same Escherichia coli cell. In contrast, over-expressing leader peptidase did increase the copy number of two 9-residue peptides that were poorly incorporated into hybrid virions. The factors that limit peptide display are varied and not restricted to the early stages of viral assembly.

Development of an internally quenched fluorescent substrate for Escherichia coli leader peptidase

Escherichia coli leader peptidase, an integral membrane protein, is responsible for the cleavage of the signal sequence of many exported proteins. Recent studies suggest that it is a novel serine protease that utilizes a serine-lysine catalytic dyad. In an effort to further understand the mechanism of this enzyme, an internally quenched fluorescent peptide substrate incorporating the leader peptidase cleavage site of maltose binding protein signal peptide, Y(NO2)-F-S-A-S-A-L-A-K-I-K(Abz) (anthraniloyl), was designed and synthesized. In the intact peptide, the fluorescence of the anthraniloyl group is quenched by the 3-nitrotyrosine. This quenched fluorescence is liberated upon cleavage of the peptide by the leader peptidase, resulting in increased fluorescence that could then be monitored fluorometrically. The designed substrate can be cleaved effectively by E. coli leader peptidase as detected by both HPLC and fluorescent spectroscopy. Mass spectra of cleavage products demonstrated that the cleavage occurs at the predicted site (A-K). The cleavage of the peptide substrate has a linear dependence on the enzyme concentration (0.1 to 1.9 microM) and the kcat/K(m) was calculated to be 71.1 M-1 s-1. These data are comparable with the unmodified peptide substrate. This report represents the first direct continuous assay based on fluorescence resonance energy transfer for E. coli leader peptidase.

Use of site-directed chemical modification to study an essential lysine in Escherichia coli leader peptidase

Escherichia coli leader peptidase, which catalyzes the cleavage of signal peptides from pre-proteins, is an essential, integral membrane serine peptidase that has its active site residing in the periplasmic space. It contains a conserved lysine residue that has been proposed to act as the general base, abstracting the proton from the side chain hydroxyl group of the nucleophilic serine 90. To help elucidate the role of the essential lysine 145 in the activity of E. coli leader peptidase, we have combined site-directed mutagenesis and chemical modification methods to introduce unnatural amino acid side chains at the 145-position. We show that partial activity can be restored to an inactive K145C leader peptidase mutant by reacting it with 2-bromoethylamine.HBr to produce a lysine analog (gamma-thia-lysine) at the 145-position. Modification with the reagents 3-bromopropylamine.HBr and 2-mercaptoethylamine also allowed for partial restoration of activity showing that there is some flexibility in the length requirements of this essential residue. Modification with (2-bromoethyl)trimethylammonium.Br to form a positively charged, nontitratable side chain at the 145-position failed to restore activity to the inactive K145C leader peptidase mutant. This result, along with an inactive K145R mutant result, supports the claim that the lysine side chain at the 145-position is essential due to its ability to form a hydrogen bond(s) or to act as a general base rather than because of an ability to form a critical salt bridge. We find that leader peptidase processes the pre-protein substrate, pro-OmpA nuclease A, with maximum efficiency at pH 9.0, and apparent pKa values for titratable groups at approximately 8.7 and 9.3 are revealed. We show that the lysine modifier maleic anhydride inhibits leader peptidase by reacting with lysine 145. The results of this study are consistent with the hypothesis that the lysine at the 145-position of leader peptidase functions as the active site general base. A model of the active site region of leader peptidase is presented based on the structure of the E. coli UmuD', and a mechanism for bacterial leader peptidase is proposed.

Processing of colicin V-1, a secretable marker protein of a bacterial ATP binding cassette export system, requires membrane integrity, energy, and cytosolic factors

Extracellular secretion of the peptide antibiotic colicin V (ColV) in Escherichia coli is mediated by a dedicated exporter system consisting of host TolC protein and the products of two specific genes, cvaA and cvaB, the latter being a member of the ATP binding cassette (ABC) superfamily. An amino-terminal export signal of ColV is specific for the CvaA-CvaB-TolC exporter and is processed concomitant with secretion. In this study, we attempt to characterize this processing with a secretable marker protein, ColV-1, using a newly developed in vitro assay. Processing is found to be dependent on both CvaA-CvaB transporters and the TolC protein and to require membrane integrity. An additional cytoplasmic soluble factor(s) is also necessary for the processing. Although the sequence of the cleavage site suggests it could be a substrate, ColV-1 cannot be processed in vitro by the purified leader peptidase I. Moreover, ColV-1 processing is inhibited by antipain and N-ethylmaleimide. Furthermore, the processing requires energy in the form of nucleotide hydrolysis. These results indicate that the processing of ColV-1 is specific and more complex than expected, requiring the CvaA-CvaB-TolC transporter intact in the membrane, energy, and cytosolic factors for rapid cleavage.

Bacillus amyloliquefaciens possesses a second type I signal peptidase with extensive sequence similarity to other Bacillus SPases

A second sipS2(BA) gene was PCR cloned from Bacillus amyloliquefaciens. The deduced aa sequence is similar to those of the SPases of B. subtilis, B. amyloliquefaciens, and B. licheniformis and the domain structure of the gene has been preserved. A low level of monocistronic gene transcription could be shown using Northern analysis. The sipS2(BA) gene was mapped to a region downstream of an E. coli fruA gene homologue and shown to express a 21 kDa protein in Escherichia coli.

A quantitative assay to determine the amount of signal peptidase I in E. coli and the orientation of membrane vesicles

The number of Signal Peptidase I (SPasel) molecules per E. coli cell was determined using western blot techniques. Different strains were found to contain approximately 1000 SPasel molecules per cell during exponential growth. Based on the activity of SPasel in vitro it could be estimated that this amount is sufficient to process all translocated precursors. SPasel did not appear to be under growth phase dependent control, but was constitutively expressed. The quantitative western blot technique was also used to establish the orientation and intactness of isolated inner membrane vesicles.

Crystallization of a soluble, catalytically active form of Escherichia coli leader peptidase

Leader peptidase, a novel serine protease in Escherichia coli, catalyzes the cleavage of the amino-terminal leader sequences from exported proteins. It is an integral membrane protein containing two transmembrane segments with its carboxy-terminal catalytic domain residing in the periplasmic space. Here, we report a procedure for the purification and the crystallization of a soluble non-membrane-bound form of leader peptidase (delta 2-75). Crystals were obtained by the sitting-drop vapor diffusion technique using ammonium dihydrogen phosphate as the precipitant. Interestingly, we have found that the presence of the detergent Triton X-100 is required to obtain crystals sufficiently large for X-ray analysis. The crystals belong to the tetragonal space group P4(2)2(1)2, with unit cell dimensions of a = b = 115 A and c = 100 A, and contain 2 molecules per asymmetric unit. This is the first report of the crystallization of a leader (or signal) peptidase.

Characterization of a soluble, catalytically active form of Escherichia coli leader peptidase: requirement of detergent or phospholipid for optimal activity

Leader peptidase is a novel serine protease in Escherichia coli, which functions to cleave leader sequences from exported proteins. Its catalytic domain extends into the periplasmic space and is anchored to the membrane by two transmembrane segments located at the N-terminal end of the protein. At present, there is no information on the structure of the catalytic domain. Here, we report on the properties of a soluble form of leader peptidase (delta 2-75), and we compare its properties to those of the wild-type enzyme. We find that the truncated leader peptidase has a kcat of 3.0 S-1 and a Km of 32 microM with a pro-OmpA nuclease A substrate. In contrast to the wild-type enzyme (pI of 6.8), delta 2-75 is water-soluble and has an acidic isoelectric point of 5.6. We also show with delta 2-75 that the replacement of serine 90 and lysine 145 with alanine residues results in a 500-fold reduction in activity, providing further evidence that leader peptidase employs a catalytic serine/lysine dyad. Finally, we find that the catalysis of delta 2-75 is accelerated by the presence of the detergent Triton X-100, regardless if the substrate is pro-OmpA nuclease A or a peptide substrate. Triton X-100 is required for optimal activity of delta 2-75 at a level far below the critical micelle concentration. Moreover, we find that E. coli phospholipids stimulate the activity of delta 2-75, suggesting that phospholipids may play an important physiological role in the catalytic mechanism of leader peptidase.