Modification of biopolymer functions by high pressure

Effect of ultrahigh hydrostatic pressure on the activity and structure of mushroom (Agaricus bisporus) polyphenoloxidase

High hydrostatic pressure (HHP, treatment pressure ≤700 MPa) is approved to be the most successful commercial nonthermal processing due to its minimal modifications in nutritional and sensory quality. However, for some pressure stable enzymes such as PPO, this unique technology can hardly inactivate them at treatment pressure below of 700 MPa. This study investigated the effects of ultrahigh hydrostatic pressure (UHHP, treatment pressure >700 MPa) on the activity of Agaricus bisporus mushroom polyphenoloxidase (PPO) both in the phosphate buffer and in the mushroom puree, and on the structure of the enzyme by means of circular dichroism (CD), fluorescence emission spectra, and sulphydryl group detection. The results showed that UHHP treatment at pressure from 800 to 1600 MPa caused significant inactivation on the PPO both in the phosphate buffer and in the mushroom puree. UHHP treatment at 1400 and 1600 MPa for 1 min reduced the enzyme activity by 90.4% and 99.2% in the buffer;, however, higher enzyme activity remained in the puree after UHHP treatment at the same condition. CD and fluorescence spectra analysis showed that the secondary and tertiary structures of UHHP treated mushroom PPO were changed. The sulphydryl group (SH) detection revealed that the SH content on the surface of UHHP treated mushroom PPO was increased. It has been suggested that the inactivation of mushroom PPO by UHHP treatment at pressure higher than 1000 MPa was due to the synergistic effect of the pressure and the heat arising from pressurization, in which heat plays a major role.

Effects of high-pressure treatment on free fatty acids release during ripening of ewes' milk cheese

The free fatty acid (FFA) profile of high pressure treated ewes' milk cheeses were studied to assess the effect of pressure treatment on cheese lipolysis. Cheeses were treated at 200, 300, 400 or 500 MPa (2P to 5P) at two stages of ripening (after 1 and 15 days of manufacturing; P1 and P15) and FFA were assayed at 1, 15 and 60 d ripening. On the first day of ripening, 3P1-cheeses showed levels of FFA twice that of the control cheeses. However, no significant differences were found between 3P1 and control cheeses at 60 d ripening. On the contrary, 4P1 and 5P1-cheeses had the lowest total FFA levels. The point at which pressure treatment was applied influenced the FFA profile of cheeses; cheeses pressurized at pressures <400 MPa on the first day of ripening were more similar to untreated cheeses than their homologues treated at 15 d.

Effects of High Pressure on Proteolytic Enzymes in Cheese: Relationship with the Proteolysis of Ewe Milk Cheese

Ewe milk cheeses were submitted to 200, 300, 400, and 500 MPa (2P to 5P) at 2 stages of ripening (after 1 and 15 d of manufacturing; P1 and P15). The high-pressure-treated cheeses showed a more important hydrolysis of beta-casein than control and 2P1 cheeses. Degradation of alpha(s1)-casein was more important in 3P1, 4P1, and P15 cheeses than control and 2P1 cheeses. The 5P1 cheeses exhibited the lowest degradation of alpha(s)-caseins, probably as a consequence of the inactivation of residual chymosin. Treatment at 300 MPa applied on the first day of ripening increased the peptidolytic activity, accelerating the secondary proteolysis of cheeses. The 3P1 cheeses had extensive peptide degradation and the highest content of free amino acids. Treatments at 500 MPa, however, decelerated the proteolysis of cheeses due to a reduction of microbial population and inactivation of enzymes.

Effect of high-pressure treatment and a bacteriocin-producing lactic culture on the proteolysis, texture, and taste of Hispánico cheese

The effects of high-pressure treatment, by itself or in combination with a bacteriocin-producing culture added to milk, on the proteolysis, texture, and taste of Hispánico cheese were investigated. Two vats of cheese were manufactured from a mixture of cow and ewe milk. Milk in one vat was inoculated with 0.5% Lactococcus lactis ssp. lactis INIA 415, a nisin Z and lacticin 481 producer; 0.5% L. lactis ssp. lactis INIA 415-2, a bacteriocin-nonproducing mutant; and 2% of a commercial Streptococcus thermophilus culture. Milk in the other vat was inoculated with 1% L. lactis ssp. lactis INIA 415-2 and 2% S. thermophilus culture. After ripening for 15 d at 12 degrees C, half of the cheeses from each vat were treated at 400 MPa for 5 min at 10 degrees C. Ripening of high-pressure-treated and untreated cheeses continued at 12 degrees C until d 50. High-pressure treatment of cheese made from milk without the bacteriocin producer accelerated casein degradation and increased the free AA content, but it did not significantly influence the taste quality or taste intensity of the cheese. Addition of the bacteriocin producer to milk lowered the ratio of hydrophobic peptides to hydrophilic peptides, increased the free AA content, and enhanced the taste intensity. The combination of milk inoculation with the bacteriocin producer and high-pressure treatment of the cheese resulted in higher levels of both hydrophobic and hydrophilic peptides but had no significant effect on the free AA content, taste quality, or taste intensity.

Simultaneous and in Situ Analysis of Thermal and Volumetric Properties of Starch Gelatinization over Wide Pressure and Temperature Ranges

A method for simultaneous and in situ analysis of thermal and volumetric properties of starch gelatinization from 0.1 to 100 MPa and from 283 to 430 K is described. The temperature of a very sensitive calorimetric detector containing a starch-water emulsion at a selected pressure is programmed to rise at a slow rate; volume variations are performed automatically to keep the selected pressure constant while the heat exchange rate and the volume are recorded. The method is demonstrated with a novel investigation of pressure effects on a sequence of three phase transitions in an aqueous emulsion of wheat starch (56 wt % water). The volume changes during the main endothermic transition (M), associated with melting of the crystalline part of the starch granules and a helix-coil transformation in amylopectin, but also with an important swelling, were separated into a volume increase associated with swelling and a volume decrease associated with the transition itself. Thermodynamic parameters for this transition together with their pressure dependencies have been obtained from four independent experiments at each pressure. The data are thermodynamically consistent, but are poorly described by the Clapeyron equation. The negative volume change of the slow exothermic transition (A) appearing just after the main endothermic transition (M) is small, spread out over a wide temperature interval, and occurs at higher temperatures with increasing pressures. This transition is probably associated with reassociation of the unwound helixes of amylopectin with parts of amylopectin molecules other than their original helix duplex partner. The positive volume change of the high-temperature, endothermic transition (N) with a small enthalpy change is probably associated with a nematic-isotropic transformation ending the formation of a homogeneous SOL phase (in the sense of Flory), and is also pushed to higher temperatures with increasing pressures. Knowledge of the state of wheat starch as a function of pressure and temperature is important in extruder processing. The data also provide a basis for the elliptic phase diagram for starch gelatinization. The method is easily adapted to determine similar data for other macromolecular materials.

Effects of pressure on the activity and spectroscopic properties of carboxyl proteinases. Apparent correlation of pepstatin-insensitivity and pressure response

The pressure dependence of the activity and spectroscopic properties of four carboxyl proteinases were investigated. Two were pepstatin-sensitive carboxyl proteinases (porcine pepsin and proteinase A from baker's yeast) and two were pepstatin-insensitive carboxyl proteinases (from Pseudomonas sp. 101 (pseudomonapepsin; PCP) and Xanthomonas sp. T-22 (xanthomonapepsin; XCP)). The specificity constant [k(cat)/K(m(app))] of PCP and XCP for a synthetic peptide substrate showed only a slight decrease with increasing pressure, whereas pepsin and proteinase A showed substantial disactivation at higher pressures. The calculated apparent activation volume (Delta V((k(cat)/(K(m)) was about 1, 3, 13, and 14 mL.mol(-1) for PCP, XCP, pepsin, and proteinase A, respectively. The hydrolysis of acid-denatured myoglobin by the four carboxyl proteinases was only slightly affected by high pressure (except for proteinase A at 400 MPa), in contrast to the results for the peptide hydrolysis. In fact, PCP, XCP, and proteinase A actually showed slightly higher degradations of acid-denatured myoglobin at higher pressures. The residual activities of these enzymes after the incubation at high pressures implied a pressure-induced stabilization towards autolysis. The changes in the fourth derivative near-UV absorbance spectrum of the four enzymes in aqueous solution were measured at various pressures from 0.1 to 400 MPa. Upon an increase in pressure, the peaks from PCP and XCP red-shifted slightly, whereas pepsin and proteinase A blue-shifted substantially, thus indicating a more polar environment. The intrinsic fluorescence also decreased upon increasing pressure. However, the change for XCP was rather small, but the change for the other three was very large. The changes in the peak wavelength for pepsin and proteinase A were characteristic, and also indicated a more polar environment under high pressure. An analysis by the center of spectra mass (CSM) gave the Delta G and Delta V of transition as 9.8 kJ x mol(-1) and -24 mL x mol(-1) (pepsin) and 11.7 kJ x mol(-1) and -43 mL x mol(-1) (proteinase A), respectively, by assuming a simple two-state transition. The circular dichroism (CD) showed relatively small changes after 1-h incubations at 400 MPa, indicating that the secondary structures were largely maintained.

Pressure-temperature phase transition diagram for wheat starch

Wheat starch suspensions in water (5% dry matter) were subjected to various pressures (0.1-600 MPa) and temperatures (-20 to 96 degrees C) for 15 min. The gelatinization rate was measured after treatment by using microscopic measurements of the loss of birefringence of the granules. This method was previously calibrated by differential scanning calorimetry. Curves of isogelatinization were found to be quite similar to a pressure-temperature (P-T) diagram of unfolding proteins. Results were first analyzed by considering the thermodynamic aspects related to the dT/dP curve shifts. On the basis of equations already shown for proteins, the P-T gelatinization diagram of wheat starch would show different kinds of thermal contributions, suggesting endothermic, athermic, or exothermic melting reactions. Second, as a practical consequence, these previous P-T areas corresponded to specific gelatinization conditions as confirmed by hydration evaluation measured by starch swelling index. Depending on the pressure-temperature conditions, gelatinization would involve hydration. Lowering the pressure and temperature resulted in a complete gelatinization with less hydration in comparison with a thermal treatment at atmospheric pressure. A hydration model based on an energetic approach was proposed.

Amyloglucosidase hydrolysis of high-pressure and thermally gelatinized corn and wheat starches

The study of glucose production using amyloglucosidase as a biocatalyst was carried out using high-pressure and thermally gelatinized corn and wheat starches. For corn starch, the measured initial rate of glucose production obtained from thermal gelatinization is faster than that obtained from the two high-pressure treatments, but the equilibrium yield of glucose was found to be similar for the three treatments. High-pressure treatments of wheat starch significantly improve the equilibrium yield of glucose compared with those obtained from the thermally gelatinized wheat starch. This difference has been related to the formation of amylose-lipid complexes during heating and could also explain previous physicochemical differences observed between high-pressure and thermally gelatinized starch.

Activity and stability of a neutral protease from Vibrio sp. (vimelysin) in a pressure-temperature gradient

The apparent second-order rate constant of hydrolysis of Fua-Gly-LeuNH2 by vimelysin, a neutral protease from Vibrio sp. T1800, was measured in a variable pressure-temperature gradient (0. 1-400 MPa and 5-40 degrees C). The apparent maximum rate was observed at approximately 15 degrees C and 150-200 MPa; the pressure-activation ratio (kcat/Km(max)/kcat/Km(0.1 MPa)) was reached about sevenfold. The pressure dependence of the kcat and Km parameters at constant temperature (25 degrees C) revealed that the pressure-activation below 200 MPa was mainly caused by a change in the kcat parameter. The change in the intrinsic fluorescence intensity of vimelysin was also measured in a pressure-temperature plane (0.1-400 MPa and -20 to +60 degrees C). The fluorescence intensity was found to decrease by increasing pressure and temperature, and the isointensity contours were more or less circular. The tangential lines to the contours at high temperatures and low to medium pressures seem to have slightly positive slopes, which was reflected by the higher residual activities left after incubations at higher temperatures and medium pressure (200 MPa and 50 degrees C) and by the almost intact secondary structure left after 1 h of incubation at 200 MPa and 40 degrees C, as studied by circular dichroism. These results were compared with the corresponding results for thermolysin, a moderately thermostable protease from Bacillus thermoproteolyticus. Apparent differences that might be related to the temperature adaptations of the respective source microbes are also discussed.

Fluorescence and FTIR study of the pressure-induced denaturation of bovine pancreas trypsin

The pressure denaturation of trypsin from bovine pancreas was investigated by fluorescence spectroscopy in the pressure range 0. 1-700 MPa and by FTIR spectroscopy up to 1000 MPa. The tryptophan fluorescence measurements indicated that at pH 3.0 and 0 degrees C the pressure denaturation of trypsin is reversible but with a large hysteresis in the renaturation profile. The standard volume changes upon denaturation and renaturation are -78 mL.mol-1 and +73 mL.mol-1, respectively. However, the free energy calculated from the data in the compression and decompression directions are quite different in absolute values with + 36.6 kJ.mol-1 for the denaturation and -5 kJ. mol-1 for the renaturation. For the pressure denaturation at pH 7.3 the tryptophan fluorescence measurement and enzymatic activity assays indicated that the pressure denaturation of trypsin is irreversible. Interestingly, the study on 8-anilinonaphthalene-1-sulfonate (ANS) binding to trypsin under pressure leads to the opposite conclusion that the denaturation is reversible. FTIR spectroscopy was used to follow the changes in secondary structure. The pressure stability data found by fluorescence measurements are confirmed but the denaturation was irreversible at low and high pH in the FTIR investigation. These findings confirm that the trypsin molecule has two domains: one is related to the enzyme active site and the tryptophan residues; the other is related to the ANS binding. This is in agreement with the study on urea unfolding of trypsin and the knowledge of the molecular structure of trypsin.

Pressure response of protein backbone structure. Pressure-induced amide 15N chemical shifts in BPTI

The effect of pressure on amide 15N chemical shifts was studied in uniformly 15N-labeled basic pancreatic trypsin inhibitor (BPTI) in 90%1H2O/10%2H2O, pH 4.6, by 1H-15N heteronuclear correlation spectroscopy between 1 and 2,000 bar. Most 15N signals were low field shifted linearly and reversibly with pressure (0.468 +/- 0.285 ppm/2 kbar), indicating that the entire polypeptide backbone structure is sensitive to pressure. A significant variation of shifts among different amide groups (0-1.5 ppm/2 kbar) indicates a heterogeneous response throughout within the three-dimensional structure of the protein. A tendency toward low field shifts is correlated with a decrease in hydrogen bond distance on the order of 0.03 A/2 kbar for the bond between the amide nitrogen atom and the oxygen atom of either carbonyl or water. The variation of 15N shifts is considered to reflect site-specific changes in phi, psi angles. For beta-sheet residues, a decrease in psi angles by 1-2 degrees/2 kbar is estimated. On average, shifts are larger for helical and loop regions (0.553 +/- 0.343 and 0.519 +/- 0.261 ppm/2 kbar, respectively) than for beta-sheet (0.295 +/- 0.195 ppm/2 kbar), suggesting that the pressure-induced structural changes (local compressibilities) are larger in helical and loop regions than in beta-sheet. Because compressibility is correlated with volume fluctuation, the result is taken to indicate that the volume fluctuation is larger in helical and loop regions than in beta-sheet. An important aspect of the volume fluctuation inferred from pressure shifts is that they include motions in slower time ranges (less than milliseconds) in which many biological processes may take place.

Studies on the formation and stability of a complex between Streptomyces proteinaceous metalloprotease inhibitor and thermolysin

The effects of certain physicochemical parameters on the formation and stability of a complex between Streptomyces proteinaceous metalloprotease inhibitor (SMPI) and thermolysin were investigated. SMPI had its lowest Ki value at a pH of around 6.5 (similar to the pH dependence of the kcat/K(m) of thermolysin catalysis), reflecting the splitting mechanism of the SMPI inhibition of thermolysin. This Ki increased with an increase in pressure, and in (Ki-1) was almost linear with respect to pressure. The volume of the reaction (delta Vcomp), which is the volume change accompanying enzyme-inhibitor complex formation, was calculated as +8.1 +/- 0.3 mL.mol-1, which has a sign opposite to delta Vcomp for neutral peptide inhibitors and acyl-peptide substrates. The temperature dependence of Ki-1 gave the reaction enthalpy (delta Hcomp) and reaction entropy (delta Scomp) of the complex formation as 34.6 +/- 1.4 kJ.mol-1 and 298 +/- 5 J.mol-1.K-1, respectively. These positive reaction volumes and reaction entropies were related to the electrostatic interactions and ionic strength dependence of Ki which corresponded to the key ionic interaction during complex formation. Complex formation with SMPI stabilized thermolysin against pressure perturbation as observed by the changes in the Trp fluorescence of thermolysin with increasing pressure. Thermal stability, however, was affected very little by complex formation with SMPI. Phosphoramidon, Cbz-Phe-Gly-NH2 and Cbz-Phe also positively affected the pressure-tolerance of thermolysin, in the following order: Cbz-Gly-Phe-NH2 < Cbz-Phe << phosphoramidon. The third compound exhibited stabilizing effects comparable with those of SMPI, which suggests that the interaction between SMPI and thermolysin was localized to the reactive site.

Site-specific modification of rabbit muscle creatine kinase with sulfhydryl-specific fluorescence probe by use of hydrostatic pressure

We investigated the effect of pressure on the reactivity of cysteine residues of rabbit muscle creatine kinase (CK). Performing the fluorescent modification under high pressure, a unique sulfhydryl group (Cys-253) of CK was labeled, in addition to Cys-282, which is known as a single reactive sulfhydryl under ambient conditions. CK is composed of two identical subunits, containing four cysteine residues in each subunit. Cys-282 plays an important role in enzymatic activity. In the pressure range from 0.1 MPa to 300 MPa, only one sulfhydryl group for each subunit of CK reacted with the reagents. However, at 400 MPa 2 sulfhydryl groups were modified. The 2-nitro-5-thiocyanobenzoic acid (NTCB) cleavage method revealed that both Cys-282 and Cys-253 were modified at 400 MPa. The chemical modification of Cys-282 induced a loss of enzymatic activity. By taking advantage of the modification under high pressure, selective modification of Cys-253 with 5-[N-(iodoacetamidoethyl)amino]-naphthalene-1-sulfonate (IAEDANS) was performed. A reversible blocking of Cys-282 at atmospheric pressure was followed by the reaction of Cys-253 with the fluorescent probe at 400 MPa. After the decompression, Cys-282 was unblocked, and obtained Cys-253-modified CK retained up to 64% of the catalytic activity of the intact CK. The fluorescent properties of IAEDANS covalently bound at Cys-253 were not significantly different from those of IAEDANS covalently bound at Cys-282.

Structure of pressure-induced denatured state of human serum albumin: a comparison with the intermediate in urea-induced denaturation

The structure of human serum albumin (HSA) in the pressure-induced denatured state was investigated by fluorescence spectroscopy. HSA undergoes a conformational change in the pressure range from 0.1 MPa to 400 MPa, at 25 degrees C. Several ligands bind to specific sites in HSA, and the fluorescence spectra of these ligands were used to study the conformational state of this protein. The warfarin-binding site (site I) and the dansylsarcosine-binding site (site II), are located in subdomains II and III, respectively. The fluorescence spectra of these probes reflected the structural changes in each of these subdomains. Dansylsarcosine completely dissociated from its binding site in domain III above 300 MPa, but substantial affinity of warfarin remained in this pressure range. Similar results were obtained for the urea-induced denaturation of HSA; although dansylsarcosine completely dissociated at urea concentration above 6 M, warfarin remained bound to site I in domain II at these concentrations. These results suggest that the structure of domain III is unfolded both in the initial stages of both pressure- and urea-induced denaturation of HSA. HSA possesses a single tryptophan residue (Trp-214) in domain II, and fluorescence from this residue reflects structural changes in this domain. In the urea-induced denatured state of HSA, a red-shift in the wavelength of maximum fluorescence occurred over urea concentrations ranging from 4 M to 6 M. This shift indicated that a structural change in domain II occurred simultaneously with the unfolding of domain III in this concentration range. On other hand, the shift in the wavelength of maximum fluorescence of Trp-214 was comparatively small in the pressure range from 0.1 MPa to 400 MPa indicating that the environment of Trp-214 was not affected. These results indicate that preferential unfolding of domain III occurs in the pressure-induced denatured state of HSA.

Reversible inhibition of lambda exonuclease with high pressure

The hydrolytic activity of lambda exonuclease, a highly processive enzyme, is inhibited by high pressure. When assayed at 67 MPa, the activity is 87% of the atmospheric rate; increasing the pressure to 336 MPa causes a greater than 99% inhibition of the enzyme activity. Decreasing the pressure from 336 MPa to 67 MPa at 20 degrees C reverses the inhibition. The use of hydrostatic pressure to control the activity of lambda exonuclease has potential practical application in DNA sample preparation, analysis, and sequencing.

The pressure-induced structural change of bovine alpha-lactalbumin as studied by a fluorescence hydrophobic probe

The effect of pressure on bovine alpha-lactalbumin (LA) has been investigated by fluorescence methods. The intrinsic fluorescence spectra of holo-LA (CaII-bound LA) hardly changed in its intensity and maximum wavelength on increasing the pressure up to 400 MPa. In the intrinsic fluorescence spectrum of apo-LA (CaII-depleted form) the maximum wavelength was red-shifted, and the intensity was increased to a large extent by increasing pressure. The fluorescence titrations of both forms of LA were performed with a fluorescent hydrophobic probe 1,1'-bis(4-anilino)naphthalene-5,5'-disulfonate (bis-ANS) at various pressures, and binding constants (Kb) of bis-ANS were calculated. The Kb-value for holo-LA slightly decreased from 0.1 to 100 MPa and increased above 200 MPa. The Kb value for apo-LA gradually increased with increasing pressure up to 400 MPa. These results were explained by the difference in hydrophobic characteristics of holo- and apo-LA.

Modification of the single unpaired sulfhydryl group of beta-lactoglobulin under high pressure and the role of intermolecular S-S exchange in the pressure denaturation [single SH of beta-lactoglobulin and pressure denaturation]

Chemical modification reactions of the unpaired sulfhydryl group of beta-lactoglobulin (LG) under high pressure and the role of this group in the pressure-induced denaturation were investigated. When LG was incubated at 400 MPa (pH 6.8) for 1 h, dimerization through intermolecular reaction of SH was observed. The generation of the covalently linked dimers were prevented by the presence of N-ethylmaleimide (NEM), an agent for SH-specific modification. The reactivity of the SH group of LG, which is buried inside in its native state, was increased by high pressure, as a result of its exposure to the protein surface accompanied by the pressure denaturation. The effect of NEM was also observed in the fluorescence change caused by high pressure, in both the intrinsic fluorescence of LG and the retinol fluorescence of the LG-retinol complex. The control showed an irreversible change at neutral pH, but it became mostly reversible in the presence of NEM. Compatible results were obtained by CD spectroscopy. Inter- and intramolecular reactions of the SH group are suggested to be main causes for the pressure-induced irreversible denaturation of LG.

Pressure-induced change in proteins studied through chemical modifications

Pressure-induced change of two bovine proteins, alpha-lactalbumin (LA) and beta-lactoglobulin (LG), was investigated at neutral pH by means of fluorescence and CD spectroscopy. The rate and the extent of modification was considerably increased by applying high pressure during the dansylation reaction of LG, while those for LA were only moderately affected. This difference was accounted for by the structural deformation of these proteins under high pressure. The fluorescence spectrum of these proteins measured under elevated pressure, as well as their fluorescence and CD spectra after the pressure release, indicated different responses towards pressure. The structural change of LA was practically reversible up to 400 MPa, whereas that of LG lost reversibility at 150 MPa or lower. Fluorescent measurement of dansylated (prepared at atmospheric pressure) proteins, especially the energy transfer from the intrinsic Trp residue to the dansyl group, showed that the protein structure was deformed by pressure and that the energy transfer facility of the two proteins was differently affected by high pressure, probably reflecting the degree of compactness of their pressure-perturbed structures.

Effect of pressure on the deuterium exchange reaction of alpha-lactalbumin and beta-lactoglobulin

The effect of pressure on the deuterium exchange reaction of alpha-lactalbumin (LA) and beta-lactoglobulin (LG) was investigated to determine the structural change in these proteins induced by elevated pressure. LG, one of the main components of milk whey, has been degraded selectively from other milk proteins including LA by protease treatment under high pressure (Hayashi, R., Kawamura, Y. and Kunugi, S. J. Food Sci. 1987; 52: 1107-1108). This was considered to occur because LG lost its native structure under high pressure more remarkably than LA. In the present study, the H/D exchange reaction was carried out under high pressure and the resulting structures were analysed by Fourier-transform infra-red (FTIR) and nuclear magnetic resonance (NMR) spectroscopy, after the release of elevated pressure. The wavenumber of amide I bands in the FTIR spectrum assigned to alpha-helix and beta-sheet structures of the proteins, shifted to lower regions as the H/D exchange of protons proceeded. The integral band area of the amide proton signal in low-field regions of the NMR spectrum is related to the H/D exchange of less stable protons in the protein. H/D exchanges for LA at 200 MPa and LG at 50 MPa were detectable by NMR as a decrease in the amide proton signals, but they were detected less unambiguously by FTIR. This apparent difference may be explained by reference to an intermediary unfolding stage of the protein that is generated under moderately high pressure.

Kinetics of butyrylcholinesterase in reversed micelles under high pressure

The combined effects of high pressure and reversed micelles have been studied to modulate the catalytic behaviour of butyrylcholinesterase. The purpose of this study was to determine whether the conformational plasticity of the enzyme is altered by entrapment in reversed micelles. The presence of soman, an irreversible inhibitor of cholinesterase was used to bring to the fore a possible modification of the enzyme behaviour in this system under pressure. Results show differences between enzyme in conventional medium and in reversed micelles regarding the mechanism of BuChE catalyzed hydrolysis of acetylthiocholine. In both systems, the enzyme displays a non-Michaelian behaviour with this substrate. In conventional medium the kinetics is multiphasic with an activation phase followed by an inhibition phase at high concentration. In reversed micelles there is inhibition by excess substrate but the activation phase is missing. This behaviour may be the result of a change of the enzyme conformational plasticity when is entrapped in reversed micelles.

Extremozymes: expanding the limits of biocatalysis

The study of enzymes isolated from organisms inhabiting unconventional ecosystems has led to the realization that biocatalysis need not be constrained to mild conditions and can be considered at pH's, temperatures, pressures, ionic and solvent environments long thought to be destructive to biomolecules. Parallel to this, it has been demonstrated that even conventional enzymes will catalyze reactions in solvents other than water. However, the intrinsic basis for biological function under extreme conditions is only starting to be addressed, as are associated applications. This was the focus of a recent NSF/NIST-sponsored workshop on extremozymes. Given the information acquired from the study of extremozymes, modification of enzymes to improve their ranges of stability and activity remains a possibility. Ultimately, by expanding the range of conditions suitable for enzyme function, new opportunities to use biocatalysis will be created.

Pasteurization of food by hydrostatic high pressure: chemical aspects

Food pasteurized by hydrostatic high pressure have already been marketed in Japan. There is great interest in this method also in Europe and USA. Temperature and pressure are the essential parameters influencing the state of substances including foods. While the influence of temperature on food has been extensively investigated, effects of pressure, also in combination with temperature, are attracting increasing scientific attention now. Processes and reactions in food governed by Le Chatelier's principle are of special interest; they include chemical reactions of both low- and macromolecular compounds. Theoretical fundamentals and examples of pressure affected reactions are presented.

Effect of high pressure on EcoRI reactions

The effect of pressure on reactions of restriction endonucleases was investigated. No obvious irreversible (after) effect was observed for EcoRI, while a considerable irreversible inactivation was found for BamHI. Thus the EcoRI reactions against lambda DNA, pBR322 and pBluescript were studied under high pressure and little effect was observed on the overall reactions. The DNA concentration dependence of the kinetic data apparently fits the Michaelis-Menten type equation and the evaluated rate parameters were: Vmax = 6.2 +/- 0.24 and 7.0 +/- 0.22 (x 10(-2) nM/min) at 0.1 and 200 MPa, respectively; Km = 19 +/- 1.8 and 28 +/- 1.7 nM at 0.1 and 200 MPa, respectively. The apparent activation volume corresponding to kcat/Km was ca +1 mL/mol. A characteristic effect of pressure on the sequence specificity of these enzymes was seen in their star activity. Relaxed specificity was tightened by increasing pressure (200 MPa) with respect to that induced by low salt concentration or by the presence of organic solvent.