Filamentous bacteriophage contract into hollow spherical particles upon exposure to a chloroform-water interface

Structurally Modified Plant Viruses and Bacteriophages with Helical Structure. Properties and Applications

Structurally modified virus particles can be obtained from the rod-shaped or filamentous virions of plant viruses and bacteriophages by thermal or chemical treatment. They have recently attracted attention of the researchers as promising biogenic platforms for the development of new biotechnologies. This review presents data on preparation, structure, and properties of the structurally modified virus particles. In addition, their biosafety for animals is considered, as well as the areas of application of such particles in biomedicine. A separate section is devoted to one of the most relevant and promising areas for the use of structurally modified plant viruses – design of vaccine candidates based on them.

Optimized Method for Pseudomonas aeruginosa Integrative Filamentous Bacteriophage Propagation

Filamentous bacteriophages frequently infect Pseudomonas aeruginosa and alter its phenotypic traits, including virulence factors. The first step in examination of these phages is to obtain suspensions with high virus titer, but as there are no methods for integrative filamentous phage multiplication, the aim was to design, describe, and compare two methods for this purpose. As models, three strains of Pseudomonas aeruginosa, containing (pro)phages Pf4, Pf5, and PfLES were used (PAO1, UCBPP-PA14, and LESB58, respectively). Method 1 comprised propagation of phages in 6 L of bacterial culture for 48 h, and method 2 applied 600 mL culture and incubation for 6 days with centrifugation and addition of new medium and inoculum at 2-day intervals. In method 1, phages were propagated by culture agitation, followed by centrifugation and filtration (0.45 and 0.22 μm), and in method 2, cultures were agitated and centrifuged several times to remove bacteria without filtration. Regardless of the propagation method, supernatants were subjected to concentration by PEG8000 and CsCl equilibrium density gradient centrifugation, and phage bands were removed after ultracentrifugation and dialyzed. In the obtained suspensions, phage titer was determined, and concentration of isolated ssDNA from virions was measured. When propagation method 2 was compared with method 1, the phage bands in CsCl were much thicker, phage number was 3.5–7.4 logs greater, and concentration of ssDNA was 7.6–22.4 times higher. When phage count was monitored from days 2 to 6, virion numbers increased for 1.8–5.6 logs, depending on phage. We also observed that filamentous phage plaques faded after 8 h of incubation when the double layer agar spot method was applied, whereas the plaques were visible for 24 h on single-layer agar. Finally, for the first time, we confirmed existence of replicative form and virions of PfLES (pro)phage as well as its ability to produce plaques. Similarly, for the first time, we confirmed plaque production of Pf5 (pro)phage present in P. aeruginosa strain UCBPP-PA14. The described method 2 has many advantages and can be further improved and adopted for filamentous phages of other hosts.

Heterogenous Susceptibility to R-Pyocins in Populations of Pseudomonas aeruginosa Sourced from Cystic Fibrosis Lungs

Bacteriocins are proteinaceous antimicrobials produced by bacteria that are active against other strains of the same species. R-type pyocins are phage tail-like bacteriocins produced by Pseudomonas aeruginosa Due to their antipseudomonal activity, R-pyocins have potential as therapeutics in infection. P. aeruginosa is a Gram-negative opportunistic pathogen and is particularly problematic for individuals with cystic fibrosis (CF). P. aeruginosa organisms from CF lung infections develop increasing resistance to antibiotics, making new treatment approaches essential. P. aeruginosa populations become phenotypically and genotypically diverse during infection; however, little is known of the efficacy of R-pyocins against heterogeneous populations. R-pyocins vary by subtype (R1 to R5), distinguished by binding to different residues on the lipopolysaccharide (LPS). Each type varies in killing spectrum, and each strain produces only one R-type. To evaluate the prevalence of different R-types, we screened P. aeruginosa strains from the International Pseudomonas Consortium Database (IPCD) and from our biobank of CF strains. We found that (i) R1-types were the most prevalent R-type among strains from respiratory sources, (ii) a large number of strains lack R-pyocin genes, and (iii) isolates collected from the same patient have the same R-type. We then assessed the impact of intrastrain diversity on R-pyocin susceptibility and found a heterogenous response to R-pyocins within populations, likely due to differences in the LPS core. Our work reveals that heterogeneous populations of microbes exhibit variable susceptibility to R-pyocins and highlights that there is likely heterogeneity in response to other types of LPS-binding antimicrobials, including phage.IMPORTANCE R-pyocins have potential as alternative therapeutics against Pseudomonas aeruginosa in chronic infection; however, little is known about the efficacy of R-pyocins in heterogeneous bacterial populations. P. aeruginosa is known to become resistant to multiple antibiotics and to evolve phenotypic and genotypic diversity over time; thus, it is particularly difficult to eradicate in chronic cystic fibrosis (CF) lung infections. In this study, we found that P. aeruginosa populations from CF lungs maintain the same R-pyocin genotype but exhibit heterogeneity in susceptibility to R-pyocins from other strains. Our findings suggest there is heterogeneity in response to other types of LPS-binding antimicrobials, such as phage, highlighting the necessity of further studying the potential of LPS-binding antimicrobial particles as alternative therapies in chronic infections.

Gold-Decorated M13 I-Forms and S-Forms for Targeted Photothermal Lysis of Bacteria

With the emergence of multidrug-resistant bacteria, photothermal therapy has been proposed as an alternative to antibiotics for targeting and killing pathogens. In this study, two M13 bacteriophage polymorphs were studied as nanoscaffolds for plasmonic bactericidal agents. Receptor-binding proteins found on the pIII minor coat protein targeted Escherichia coli bacteria with F-pili (F⁺ strain), while a gold-binding peptide motif displayed on the pVIII major coat protein templated Au nanoparticles. Temperature-dependent exposure to a chloroform-water interface transformed the native filamentous phage into either rod-like or spheroid structures. The morphology, geometry, and size of the polymorphs, as well as the receptor-binding protein and host cell receptor interaction were studied using electron microscopy. Au/template structures were formed through incubation with Au colloid, and optical absorbance was measured. Despite the closely packed Au nanoparticle layer on the surface the viral scaffolds, electron microscopy confirmed that host receptor affinity was retained. Photothermal bactericidal studies were performed using 532 nm laser irradiation with a variety of powers and exposure times. Bacterial viability was assessed using colony count. With the shape-modified M13 scaffolds, up to 64% of E. coli were killed within 20 min. These studies demonstrate the promise of i-form and s-form polymorphs for the directed plasmonic-based photothermal killing of bacteria.

M13 bacteriophage spheroids as scaffolds for directed synthesis of spiky gold nanostructures

The spherical form (s-form) of a genetically-modified gold-binding M13 bacteriophage was investigated as a scaffold for gold synthesis. Repeated mixing of the phage with chloroform caused a 15-fold contraction from a nearly one micron long filament to an approximately 60 nm diameter spheroid. The geometry of the viral template and the helicity of its major coat protein were monitored throughout the transformation process using electron microscopy and circular dichroism spectroscopy, respectively. The transformed virus, which retained both its gold-binding and mineralization properties, was used to assemble gold colloid clusters and synthesize gold nanostructures. Spheroid-templated gold synthesis products differed in morphology from filament-templated ones. Spike-like structures protruded from the spherical template while isotropic particles developed on the filamentous template. Using inductively coupled plasma-mass spectroscopy (ICP-MS), gold ion adsorption was found to be comparatively high for the gold-binding M13 spheroid, and likely contributed to the dissimilar gold morphology. Template contraction was believed to modify the density, as well as the avidity of gold-binding peptides on the scaffold surface. The use of the s-form of the M13 bacteriophage significantly expands the templating capabilities of this viral platform and introduces the potential for further morphological control of a variety of inorganic material systems.

Filamentous Bacteriophage Proteins and Assembly

Filamentous bacteriophages, also known as filamentous bacterial viruses or Inoviruses, have been studied extensively over the years. They are interesting paradigms in structural molecular biology and offer insight into molecular assembly, a process that remains to be fully understood. In this chapter, an overview on filamentous bacteriophages will be provided. In particular, we review the constituent proteins of filamentous bacteriophage and discuss assembly by examining the structure of the major coat protein at various stages of the process. The minor coat proteins will also be briefly reviewed. Structural information provides key snapshots into the dynamic process of assembly.

Conformations and membrane-driven self-organization of rodlike fd virus particles on freestanding lipid membranes

Membrane-mediated interactions and aggregation of colloidal particles adsorbed to responsive elastic membranes are challenging problems relevant for understanding the microscopic organization and dynamics of biological membranes. We experimentally study the behavior of rodlike semiflexible fd virus particles electrostatically adsorbed to freestanding cationic lipid membranes and find that their behavior can be controlled by tuning the membrane charge and ionic strength of the surrounding medium. Three distinct interaction regimes of rodlike virus particles with responsive elastic membranes can be observed. (i) A weakly charged freestanding cationic lipid bilayer in a low ionic strength medium represents a gentle quasi-2D substrate preserving the integrity, structure, and mechanical properties of the membrane-bound semiflexible fd virus, which under these conditions is characterized by a monomer length of 884 ± 4 nm and a persistence length of 2.5 ± 0.2 μm, in perfect agreement with its properties in bulk media. (ii) An increase in the membrane charge leads to the membrane-driven collapse of fd virus particles on freestanding lipid bilayers and lipid nanotubes into compact globules. (iii) When the membrane charge is low, and the mutual electrostatic repulsion of membrane-bound virus particles is screened to a considerable degree, membrane-driven self-organization of membrane-bound fd virus particles into long linear tip-to-tip aggregates showing dynamic self-assembly/disassembly and quasi-semiflexible behavior takes place. These observations are in perfect agreement with the results of recent theoretical and simulation studies predicting that membrane-mediated interactions can control the behavior of colloidal particles adsorbed on responsive elastic membranes.

Structure and assembly of filamentous bacteriophages

Filamentous bacteriophages are interesting paradigms in structural molecular biology, in part because of the unusual mechanism of filamentous phage assembly. During assembly, several thousand copies of an intracellular DNA-binding protein bind to each copy of the replicating phage DNA, and are then displaced by membrane-spanning phage coat proteins as the nascent phage is extruded through the bacterial plasma membrane. This complicated process takes place without killing the host bacterium. The bacteriophage is a semi-flexible worm-like nucleoprotein filament. The virion comprises a tube of several thousand identical major coat protein subunits around a core of single-stranded circular DNA. Each protein subunit is a polymer of about 50 amino-acid residues, largely arranged in an α-helix. The subunits assemble into a helical sheath, with each subunit oriented at a small angle to the virion axis and interdigitated with neighbouring subunits. A few copies of "minor" phage proteins necessary for infection and/or extrusion of the virion are located at each end of the completed virion. Here we review both the structure of the virion and aspects of its function, such as the way the virion enters the host, multiplies, and exits to prey on further hosts. In particular we focus on our understanding of the way the components of the virion come together during assembly at the membrane. We try to follow a basic rule of empirical science, that one should chose the simplest theoretical explanation for experiments, but be prepared to modify or even abandon this explanation as new experiments add more detail.

Biosensor for detection of antibiotic resistant Staphylococcus bacteria

A structurally transformed lytic bacteriophage having a broad host range of Staphylococcus aureus strains and a penicillin-binding protein (PBP 2a) antibody conjugated latex beads have been utilized to create a biosensor designed for discrimination of methicillin resistant (MRSA) and sensitive (MSSA) S. aureus species (1,2). The lytic phages have been converted into phage spheroids by contact with water-chloroform interface. Phage spheroid monolayers have been moved onto a biosensor surface by Langmuir-Blodgett (LB) technique (3). The created biosensors have been examined by a quartz crystal microbalance with dissipation tracking (QCM-D) to evaluate bacteria-phage interactions. Bacteria-spheroid interactions led to reduced resonance frequency and a rise in dissipation energy for both MRSA and MSSA strains. After the bacterial binding, these sensors have been further exposed to the penicillin-binding protein antibody latex beads. Sensors analyzed with MRSA responded to PBP 2a antibody beads; although sensors inspected with MSSA gave no response. This experimental distinction determines an unambiguous discrimination between methicillin resistant and sensitive S. aureus strains. Equally bound and unbound bacteriophages suppress bacterial growth on surfaces and in water suspensions. Once lytic phages are changed into spheroids, they retain their strong lytic activity and show high bacterial capture capability. The phage and phage spheroids can be utilized for testing and sterilization of antibiotic resistant microorganisms. Other applications may include use in bacteriophage therapy and antimicrobial surfaces.

Consensus structure of Pf1 filamentous bacteriophage from X-ray fibre diffraction and solid-state NMR

Filamentous bacteriophages (filamentous bacterial viruses or Inovirus) are simple and well-characterised macromolecular assemblies that are widely used in molecular biology and biophysics, both as paradigms for studying basic biological questions and as practical tools in areas as diverse as immunology and solid-state physics. The strains fd, M13 and f1 are virtually identical filamentous phages that infect bacteria expressing F-pili, and are sometimes grouped as the Ff phages. For historical reasons fd has often been used for structural studies, but M13 and f1 are more often used for biological experiments. Many other strains have been identified that are genetically quite distinct from Ff and yet have a similar molecular structure and life cycle. One of these, Pf1, gives the highest resolution X-ray fibre diffraction patterns known for filamentous bacteriophage. These diffraction patterns have been used in the past to derive a molecular model for the structure of the phage. Solid-state NMR experiments have been used in separate studies to derive a significantly different model of Pf1. Here we combine previously published X-ray fibre diffraction data and solid-state NMR data to give a consensus structure model for Pf1 filamentous bacteriophage, and we discuss the implications of this model for assembly of the phage at the bacterial membrane.

Phage-displayed peptides selected for binding to Campylobacter jejuni are antimicrobial

In developed countries, Campylobacter jejuni is a leading cause of zoonotic bacterial gastroenteritis in humans with chicken meat implicated as a source of infection. Campylobacter jejuni colonises the lower gastrointestinal tract of poultry and during processing is spread from the gastrointestinal tract onto the surface of dressed carcasses. Controlling or eliminating C.jejuni on-farm is considered to be one of the best strategies for reducing human infection. Molecules on the cell surface of C.jejuni interact with the host to facilitate its colonisation and persistence in the gastrointestinal tract of poultry. We used a subtractive phage-display protocol to affinity select for peptides binding to the cell surface of a poultry isolate of C.jejuni with the aim of finding peptides that could be used to control this microorganism in chickens. In total, 27 phage peptides, representing 11 unique clones, were found to inhibit the growth of C.jejuni by up to 99.9% in vitro. One clone was bactericidal, reducing the viability of C.jejuni by 87% in vitro. The phage peptides were highly specific. They completely inhibited the growth of two of the four poultry isolates of C.jejuni tested with no activity detected towards other Gram-negative and Gram-positive bacteria.

Acoustic Wave (TSM) Biosensors: Weighing Bacteria

This chapter is focused on the development and use of acoustic wave biosensor platforms for the detection of bacteria, specifically those based on the thickness shear mode (TSM) resonator. We demonstrated the mechanical and electrical implications of bacterial positioning at the solid-liquid interface of a TSM biosensor and presented a model of the TSM with bacteria attached operating as coupled oscillators. The experiments and model provide an understanding of the nature of the signals produced by acoustic wave devices when they are used for testing bacteria. The paradox of “negative mass” could be a real threat to the interpretation of experimental results related to the detection of bacteria. The knowledge of the true nature of “negative mass” linked to the strength of bacteria attachment will contribute significantly to our understanding of the results of “weighing bacteria.” The results of this work can be used for bacterial detection and control of processes of bacterial settlement, bacterial colonization, biofilm formation, and bacterial infection in which bacterial attachment plays a role.

Anchoring mechanisms of membrane-associated M13 major coat protein

Bacteriophage M13 major coat protein is extensively used as a biophysical, biochemical, and molecular biology reference system for studying membrane proteins. The protein has several elements that control its position and orientation in a lipid bilayer. The N-terminus is dominated by the presence of negatively charged amino acid residues (Glu2, Asp4, and Asp5), which will always try to extend into the aqueous phase and therefore act as a hydrophilic anchor. The amphipathic and the hydrophobic transmembrane part contain the most important hydrophobic anchoring elements. In addition there are specific aromatic and charged amino acid residues in these domains (Phe 11, Tyr21, Tyr24, Trp26, Phe42, Phe45, Lys40, Lys43, and Lys44) that fine-tune the association of the protein to the lipid bilayer. The interfacial Tyr residues are important recognition elements for precise protein positioning, a function that cannot be performed optimally by residues with an aliphatic character. The Trp26 anchor is not very strong: depending on the context, the tryptophan residue may move in or out of the membrane. On the other hand, Lys residues and Phe residues at the C-terminus of the protein act in a unique concerted action to strongly anchor the protein in the lipid bilayer.

Protein-lipid interactions of bacteriophage M13 major coat protein

During the past years, remarkable progress has been made in our understanding of the replication cycle of bacteriophage M13 and the molecular details that enable phage proteins to navigate in the complex environment of the host cell. With new developments in molecular membrane biology in combination with spectroscopic techniques, we are now in a position to ask how phages carry out this delicate process on a molecular level, and what sort of protein-lipid and protein-protein interactions are involved. In this review we will focus on the molecular details of the protein-protein and protein-lipid interactions of the major coat protein (gp8) that may play a role during the infection of Escherichia coli by bacteriophage M13.

Intrinsically disordered protein

Proteins can exist in a trinity of structures: the ordered state, the molten globule, and the random coil. The five following examples suggest that native protein structure can correspond to any of the three states (not just the ordered state) and that protein function can arise from any of the three states and their transitions. (1) In a process that likely mimics infection, fd phage converts from the ordered into the disordered molten globular state. (2) Nucleosome hyperacetylation is crucial to DNA replication and transcription; this chemical modification greatly increases the net negative charge of the nucleosome core particle. We propose that the increased charge imbalance promotes its conversion to a much less rigid form. (3) Clusterin contains an ordered domain and also a native molten globular region. The molten globular domain likely functions as a proteinaceous detergent for cell remodeling and removal of apoptotic debris. (4) In a critical signaling event, a helix in calcineurin becomes bound and surrounded by calmodulin, thereby turning on calcineurin's serine/threonine phosphatase activity. Locating the calcineurin helix within a region of disorder is essential for enabling calmodulin to surround its target upon binding. (5) Calsequestrin regulates calcium levels in the sarcoplasmic reticulum by binding approximately 50 ions/molecule. Disordered polyanion tails at the carboxy terminus bind many of these calcium ions, perhaps without adopting a unique structure. In addition to these examples, we will discuss 16 more proteins with native disorder. These disordered regions include molecular recognition domains, protein folding inhibitors, flexible linkers, entropic springs, entropic clocks, and entropic bristles. Motivated by such examples of intrinsic disorder, we are studying the relationships between amino acid sequence and order/disorder, and from this information we are predicting intrinsic order/disorder from amino acid sequence. The sequence-structure relationships indicate that disorder is an encoded property, and the predictions strongly suggest that proteins in nature are much richer in intrinsic disorder than are those in the Protein Data Bank. Recent predictions on 29 genomes indicate that proteins from eucaryotes apparently have more intrinsic disorder than those from either bacteria or archaea, with typically > 30% of eucaryotic proteins having disordered regions of length > or = 50 consecutive residues.

Filamentous bacteriophage stability in non-aqueous media

BACKGROUND

Filamentous bacteriophage are used as general cloning vectors as well as phage display vectors in order to study ligand-receptor interactions. Exposure to biphasic chloroform-water interface leads to specific contraction of phage, to non-infective I- or S-forms.

RESULTS

Upon exposure, phage were inactivated (non-infective) at methanol, ethanol and 1-propanol concentrations inversely dependent upon alcohol hydrophobicity. Infectivity loss of phage at certain concentrations of 1-propanol or ethanol coincided with changes in the spectral properties of the f1 virion in ultraviolet fluorescence and circular dichroism studies.

CONCLUSIONS

The alcohols inactivate filamentous phage by a general mechanism--solvation of coat protein--thereby disrupting the capsid in a manner quite different from the previously reported I- and S-forms. The infectivity retention of phagemid pG8H6 in 99% acetonitrile and the relatively high general solvent resistance of the phage strains studied here open up the possibility of employing phage display in non-aqueous media.

Phages from landscape libraries as substitute antibodies

In 'landscape' phage, as in traditional phage-display constructs, foreign peptides or proteins are fused to coat proteins on the surface of a filamentous phage particle. Unlike conventional constructs, however, each virion displays thousands of copies of the peptide in a repeating pattern, subtending a major fraction of the viral surface. The phage body serves as an interacting scaffold to constrain the peptide into a particular conformation, creating a defined organic surface structure ('landscape') that varies from one phage clone to the next. By testing landscape libraries with three representative antigens (streptavidin from the bacterium Streptomyces avidinii, avidin from chicken egg white and beta-galactosidase from Escherichia coli) we have shown that landscape phages may be used as a new type of substitute antibodies-filaments that can bind protein and glycoprotein antigens with nanomolar affinities and high specificity. In many ways these substitute antibodies are more convenient than their natural immunoglobulin counterparts.

Filamentous phage are released from the bacterial membrane by a two-step mechanism involving a short C-terminal fragment of pIII

Filamentous phage assemble at the membrane of infected cells. The phage filament is released from the membrane at the end of assembly, after four to five copies of the minor proteins, pIII and pVI, have been added to the end of the virion. In the absence of pIII or pVI, phage filaments are not released, but remain associated with the cells. The C-terminal portion of pIII, termed the "C" domain, is required for the release of stable virions. With the use of pIII C-terminal fragments of increasing size, termination of assembly can be divided into various steps. An 83-residue fragment leads to the incorporation of pVI into the assembling phage, but does not release it from the membrane. A slightly longer fragment (93 residues) is sufficient to release the particle into the culture supernatant. However, these released particles are unstable in the detergent, sarkosyl, which does not disrupt wild-type phage. A fragment of >121 residues is needed for the particle to become detergent resistant. Thus, the C-domain can be divided into two subdomains: C2, sufficient for release, and C1, required for virion stability.A model for termination of phage assembly is proposed in which pIII and pVI dock to the membrane-associated filament and form a pre- termination complex. Then, a conformational change involving the C2 domain of pIII disrupts the hydrophobic interactions with the inner membrane, releasing the phage from the cells. The pIII-mediated release of phage from the membranes points to one possible mechanism for excision of membrane-anchored protein complexes from lipid bilayers.

Isolation of chloroform-resistant mutants of filamentous phage: localization in models of phage structure

Interaction of fd or M13 filamentous phage with a chloroform/water interface induces morphological change, contracting the filaments sequentially into shortened rods (I-forms), and then into spheroidal particles (S-forms). To further investigate this phage contraction, 34 and 26 chloroform-resistant isolates of fd and M13, respectively, were selected after chloroform treatment of wild-type phages at pH 8. 2 and 4 degrees C. DNA sequencing of gene VIII of the 34 fd isolates revealed five different mutants: these were D5H, M28L, V31L, I37T, and S50T. All 26 M13 isolates were I37T. These mutants exhibited variable sensitivity to chloroform, but all contracted much more slowly than wild-type phage during treatment at 4 degrees C. They all contracted like wild-type phage at 37 degrees C. Site-directed mutagenesis showed that the indicated single mutations carried the chloroform resistance. In structural models of the phage, the D5H locus is on the outside and the S50T locus is on the inside. The M28L and I37T loci are buried in a mostly hydrophobic region in the middle. Although these four mutants are spread out radially, they are localized in the axial direction into a thin disk in the model. The last mutant locus, V31L, is out of this disk, but this locus is proximal to the M28L and I37T loci and also in contact with the surface via a deep hydrophobic hole or depression. These five mutants, their locations, and their variable affects on contraction suggest that chloroform-induced contraction involves a specific mechanism rather than a generalized solvent-induced denaturation and that the critical structural changes occur in a localized level in the phage. These results add weight to suggestions that the sequential contraction of filaments-->I-forms-->S-forms mimic corresponding steps in phage penetration, and, in the reverse order, for phage assembly.

Identification of gene VI of filamentous phage phi Lf coding for a 10-kDa minor coat protein

ORF95 in the filamentous phage phi Lf genome, locating behind gIII, was identified to be the gene (gVI) coding for minor coat protein pVI (95 amino acids, 10,245 dal). It was shown to be virion associated by Western blot analysis of chloroform-treated phage particles. Computer analysis predicted two transmembrane regions for this protein. Since no signal peptide was suggested and the size estimated by SDS-polyacrylamide gel electrophoresis matches that deduced from nucleotide sequence, it appears to be incorporated into the phage particle as its primary translational product. After completion of this study, eight genes organizing into an order of gVII-gX-gV-gVII-gIX-gIII-gIII-gVI have been identified for phi Lf.

The role of the adsorption complex in the termination of filamentous phage assembly

The adsorption complex of filamentous phage fd consists of two minor coat proteins, g3p and g6p, and is considered to be not only a structural entity, but also a functional unit to terminate phage assembly. Cells were infected with phage M13am8H1, which cannot assemble because it lacks the major coat protein g8p, although producing all of the other minor coat proteins. The membranes of infected cells were solubilized and analysed by non-denaturing PAGE and gel filtration. The data suggest the presence of the adsorption complex in these membranes. Furthermore, the non-polar gene 3 amber-mutant phage R171 was shown to lack g6p in the phage coat as well. The termination of assembly of this phage is disturbed, resulting in synthesis of polyphages. Electron micrographs and transient electrical birefringence show that these polyphages are eight times longer as compared to unit length phage. From these results, we conclude that the formation of the g3p-g6p complex is essential for correct termination of filamentous phage assembly.

The adsorption protein of bacteriophage fd and its neighbour minor coat protein build a structural entity

The adsorption protein g3p and another minor coat protein, g6p, are located at one end of the filamentous bacteriophage fd [Grant, R.A., Lin, T.C., Konigsberg, W.E. & Webster, R.E. (1981) J. Biol. Chem. 256, 539-546]. Both proteins, representing the proximal tip, were detached as an entity by a technique that allowed for gentle solubilization. Disrupting the phage particle with the detergent sodium deoxycholate and chloroform dissociates the major coat protein g8p, frees the phage DNA, but leaves g3p and g6p associated with each other. The g3p-g6p complex, which we termed the adsorption complex, and an oligomeric form of g3p with lower molecular mass were isolated and purified by gel-filtration chromatography in the presence of deoxycholate. These different oligomeric structures of g3p showed a different mobility in non-denaturing polyacrylamide-gel electrophoresis. Both forms were also found in non-denaturing polyacrylamide-gel electrophoresis from deoxycholate- and Triton-X-100-solubilized phage without prior chromatographic separation. The two oligomeric forms of g3p are composed of two g3p polypeptide chains in the case of the low-molecular-mass species, and four g3p and four g6p polypeptide chains for the adsorption complex.

Subtilisin removes the surface layer of the phage fd coat

The major coat protein of native filamentous phage fd is vulnerable to digestion by subtilisin, but not by any of a number of other proteolytic enzymes. Degradation by the non-specific protease subtilisin occurs at specific sites in the N-terminal portion of g8p. The N-terminal part of the protein is considered to be the outer layer of a two-layered coat. Thus, subtilisin treatment results in a monolayered phage particle. These particles possess the morphology and stability of native phage fd. Furthermore, subtilisin proteolysis proved to be an efficient instrument in detecting variations in the topology of the g8p of related filamentous phages.

Tryptophan contributions to the unusual circular dichroism of fd bacteriophage

The circular dichroism (CD) spectrum of fd bacteriophage has a deep minimum at 222 nm characteristic of highly alpha-helical protein, but there is a shoulder at 208 nm rather than a minimum, with a 222/208-nm amplitude ratio near 1.5 rather than near 1. Oxidation of fd phage with the tryptophan reagent N-bromosuccinimide (NBS) changes the ratio. In this report, the NBS titration of fd is followed by CD and three other spectroscopies, the results of which yield an explanation of the unusual CD spectrum. Absorbance, fluorescence, and Raman data show the oxidation to have two phases, the first of which involves the destruction of tryptophan and the second, tryptophan and tyrosine. Raman spectra reveal the invariance of an environmentally-sensitive tyrosine Fermi resonance doublet during the first oxidative phase. Raman spectra also show that little or no change of alpha-helicity occurs in the first or second oxidation phase, although very slight changes in the helix parameters might be occurring. Concurrent with the destruction of tryptophan during the first phase is the appearance in CD difference spectra ([theta]NBS-treated fd - [theta]native fd) of positive maxima at 208-210 nm and negative maxima at 224 nm, with crossovers at 217 nm. Enormous difference ellipticities, per oxidized subunit of 50 amino acids, of +490,000 +/- 80,000 deg cm2 dmol-1 at 208 nm and -520,000 +/- 110,000 deg cm2 dmol-1 at 224 nm have been derived from the data.(ABSTRACT TRUNCATED AT 250 WORDS)

A model for fd phage penetration and assembly

Below 15 degrees C, chloroform causes fd phage to contract to I-forms, which are compact structures about 1/3 as long as the original phage. Above 15 degrees C, chloroform causes I-forms to contract to even more compact spheroidal S-forms. Here we show that the coat protein structure in I-forms is the same as the protein structure in the phage and the protein structure in S-forms is the same as the protein structure in bilayers. The conversions from fd----I-forms----S-forms are therefore suggested to mimic steps in fd penetration. The same conversions, in reverse order, are suggested to mimic steps in fd assembly.

Proposed molten globule intermediates in fd phage penetration and assembly

The fd filamentous phage can be contracted to short rods called I-forms and to spheroidal particles called S-forms. The conversions from fd----I-forms----S-forms were previously suggested to mimic steps in fd penetration. The same conversions, in reverse order, were suggested to mimic steps in fd assembly. The I-forms and S-forms bind the hydrophobic probe, 1-anilino-napthalene-8-sulfonate (ANS); under the same conditions, fd binds this probe very poorly. Rigidly packed side chains in fd and nonrigidly packed side chains in I-forms and S-forms would explain the differences in ANS binding. A compilation of the properties of I-forms and S-forms indicate that: (i) they have compact structures; (ii) they have secondary structures of the same type as native phage; (iii) they have non-native morphologies; and (iv) they may have nonrigid side chain packing. These are the properties of molten globules.

Association of M13 I-forms and spheroids with lipid vesicles

Electron microscopy and density gradient centrifugation were used to demonstrate that the coat protein of M13 I-forms and spheroids, but not of filaments, can form some type of association with lipid vesicles in vitro. The association was detected only when the phage particles were incubated with dilauroylphosphatidylcholine (DLPC) or dimyristoylphosphatidylcholine (DMPC) small unilamellar vesicles (SUV) above the phase transition temperature of the lipid. Under these conditions the I-form coat protein was resistant to proteolytic digestion, and the viral DNA was also associated with the vesicles.

Coat protein conformation in M13 filaments, I-forms and spheroids

Circular dichroism studies of the filamentous coliphage M13 were carried out to determine conformational changes in the major capsid protein (the B protein) that occur during contraction of the filaments to I-forms and spheroids. The alpha-helicity of the B protein is somewhat lower in the I-forms than in filaments and much lower in spheroids. This conformational change may explain the increased detergent and lipid solubility of both I forms and spheroids relative to filaments.

Structure similarity, difference and variability in the filamentous viruses fd, If1, IKe, Pf1 and Xf. Investigation by laser Raman spectroscopy

The filamentous bacteriophages fd, If1, IKe, Pf1, Xf and Pf3 in aqueous solutions of low, moderate and high ionic strength have been investigated as a function of temperature by laser Raman difference spectroscopy. By analogy with Raman spectra of model compounds and viruses of known structure, the data reveal the following structural features: the predominant secondary structure of the coat protein subunit in each virus is the alpha-helix, but the amount of alpha-helix differs from one virus to another, ranging from an estimated high of 100% in Pf1 to a low of approximately 50% in Xf. The molecular environment and intermolecular interactions of tyrosine, tryptophan and phenylalanine residues differ among the different viruses, as do the conformations of aliphatic amino acid side-chains. The foregoing features of coat protein structure are highly sensitive to changes in Na+ concentration, temperature or both. The backbones of A-DNA and B-DNA structures do not occur in any of the viruses, and unusual DNA structures are indicated for all six viruses. The alpha-helical protein subunits of Pf1, like those of Pf3 and Xf, can undergo reversible transitions to beta-sheet structures while retaining their association with DNA; yet fd, IKe and If1 do not undergo such transitions. Raman intensity changes with ionic strength or temperature suggest that transgauche rotations of aliphatic amino acid side-chains and stacking of aromatic side-chains are important structural variables in each virus.

Minor coat protein composition and location of the A protein in bacteriophage f1 spheroids and I-forms

The filamentous bacteriophage f1 can be transformed into a spherical particle (spheroid) or an intermediate shortened filament with a flared end (I-forms) by exposure to a chloroform-water interface at 22 or 4 degrees C, respectively. The protein composition of bacteriophage f1 spheroids and I-forms was examined by separating the proteins from the purified. [35S]cysteine-labeled particles by sodium dodecyl sulfate-urea-polyacrylamide gel electrophoresis. Quantitation of the radioactivity on the gels showed that I-forms and spheroids contain the same complement of minor coat proteins as do untreated f1 phage. This composition is unchanged after removal of the DNA, either by digestion with micrococcal nuclease or by centrifugation of the particles through CsCl density gradients, indicating that none of the minor coat proteins is held in the particles solely through an interaction with the DNA. We also examined the location of the A protein in I-forms by decoration with ferritin-conjugated antibodies and examination under the electron microscope and found that the A protein is located specifically at the flared end of the I-form particle, through which the DNA is extruded and at which contraction into spheroids begins. The implications of these results with regard to the orientation of the DNA within the capsid and the process of infection are discussed.

Mechanism of coliphage M13 contraction: intermediate structures trapped at low temperatures

The filamentous coliphage M13 can be transformed into a spherical particle (termed spheroid) by exposure to an interface of water and slightly polar but hydrophobic solvent such as chloroform-water at 24 degrees C. We report here that exposure of M13 filaments to a chloroform-water interface at 2 degrees C trapped the phage particles in forms morphologically intermediate to filaments and spheroids. These structures were rods 250 nm long and 15 nm wide, and each had a closed, slightly pointed end, an open flaired end, and a hollow central channel. The final contraction of these intermediates (termed I-forms) into spheroids was dependent upon both temperature and the presence of the solvent-water interface but was apparently independent of both the minor phage coat proteins and the virion DNA. Although stable in an aqueous environment, I-forms, in contrast to filaments, were readily disrupted by detergents, suggesting that the phage structure had been altered to a form more easily solubilized by membrane lipids. These solvent-induced changes might be related to the initial steps of phage penetration in vivo.

Fine mapping of secondary structures of fd phage DNA in the region of the replication origin

A synthetic heptaribonucleotide, GACCCCC, which is complementary to a unique site on fd bacteriophage DNA, primes DNA synthesis of fd by T4 bacteriophage DNA polymerase. The rate of the GACCCCC-primed DNA synthesis was not uniform as reflected by the appearance of discrete DNA fragments as replication intermediates on an alkaline agarose gel. After 10 minutes of synthesis a significant fraction of the DNA product ran as a single band with a length of about 1960 nucleotides. We have isolated this DNA fragment, hybridized back to unlabeled fd DNA template, and mapped the Taq I restriction fragments by urea polyacrylamide gel electrophoresis. This fine mapping procedure has located two major pause sites at fd nucleotide positions 5575 and 5674. These sites reside in the stem of two very stable hairpin helices near the origin of DNA replication of fd. Models for the functional roles of these two hairpin helices are presented.