The global folding of four-way helical junctions in RNA, including that in U1 snRNA

RNA four-way junction (4WJ) for spontaneous cancer-targeting, effective tumor-regression, metastasis suppression, fast renal excretion and undetectable toxicity

The field of RNA therapeutics has been emerging as the third milestone in pharmaceutical drug development. RNA nanoparticles have displayed motile and deformable properties to allow for high tumor accumulation with undetectable healthy organ accumulation. Therefore, RNA nanoparticles have the potential to serve as potent drug delivery vehicles with strong anti-cancer responses. Herein, we report the physicochemical basis for the rational design of a branched RNA four-way junction (4WJ) nanoparticle that results in advantageous high-thermostability and -drug payload for cancer therapy, including metastatic tumors in the lung. The 4WJ nanostructure displayed versatility through functionalization with an anti-cancer chemical drug, SN38, for the treatment of two different cancer models including colorectal cancer xenograft and orthotopic lung metastases of colon cancer. The resulting 4WJ RNA drug complex spontaneously targeted cancers effectively for cancer inhibition with and without ligands. The 4WJ displayed fast renal excretion, rapid body clearance, and little organ accumulation with undetectable toxicity and immunogenicity. The safety parameters were documented by organ histology, blood biochemistry, and pathological analysis. The highly efficient cancer inhibition, undetectable drug toxicity, and favorable Chemical, Manufacturing, and Control (CMC) production of RNA nanoparticles document a candidate with high potential for translation in cancer therapy.

In Vitro and In Vivo Evaluation of the Pathology and Safety Aspects of Three- and Four-Way Junction RNA Nanoparticles

RNA therapeutics has advanced into the third milestone in pharmaceutical drug development, following chemical and protein therapeutics. RNA itself can serve as therapeutics, carriers, regulators, or substrates in drug development. Due to RNA's motile, dynamic, and deformable properties, RNA nanoparticles have demonstrated spontaneous targeting and accumulation in cancer vasculature and fast excretion through the kidney glomerulus to urine to prevent possible interactions with healthy organs. Furthermore, the negatively charged phosphate backbone of RNA results in general repulsion from negatively charged lipid cell membranes for further avoidance of vital organs. Thus, RNA nanoparticles can spontaneously enrich tumor vasculature and efficiently enter tumor cells via specific targeting, while those not entering the tumor tissue will clear from the body quickly. These favorable parameters have led to the expectation that RNA has low or little toxicity. RNA nanoparticles have been well characterized for their anticancer efficacy; however, little detail on RNA nanoparticle pathology and safety is known. Here, we report the in vitro and in vivo assessment of the pathology and safety aspects of different RNA nanoparticles including RNA three-way junction (3WJ) harboring 2'-F modified pyrimidine, folic acid, and Survivin siRNA, as well as the RNA four-way junction (4WJ) harboring 2'-F modified pyrimidine and 24 copies of SN38. Both animal models and patient serum were investigated. In vitro studies include hemolysis, platelet aggregation, complement activation, plasma coagulation, and interferon induction. In vivo studies include hematoxylin and eosin (H&E) staining, hematological and biochemical analysis as the serum profiling, and animal organ weight study. No significant toxicity, side effect, or immune responses were detected during the extensive safety evaluations of RNA nanoparticles. These results further complement previous cancer inhibition studies and demonstrate RNA nanoparticles as an effective and safe drug delivery vehicle for future clinical translations.

A biophysical study of the interactions of palladium(II), platinum(II) and gold(III) complexes of aminopyridyl-2,2'-bipyridine ligands with RNAs and other nucleic acid structures

Metal compounds form an attractive class of ligands for a variety of nucleic acids. Five metal complexes bearing aminopyridyl-2,2'-bipyridine tetradentate ligands and possessing a quasi-planar geometry were challenged toward different types of nucleic acid molecules including RNA polynucleotides in the duplex or triplex form, an RNA Holliday four-way junction, natural double helix DNA and a DNA G-quadruplex. The binding process was monitored comparatively using different spectroscopic and melting methods. The binding preferences that emerge from our analysis are discussed in relation to the structural features of the metal complexes.

Thermostability, Tunability, and Tenacity of RNA as Rubbery Anionic Polymeric Materials in Nanotechnology and Nanomedicine-Specific Cancer Targeting with Undetectable Toxicity

RNA nanotechnology is the bottom-up self-assembly of nanometer-scale architectures, resembling LEGOs, composed mainly of RNA. The ideal building material should be (1) versatile and controllable in shape and stoichiometry, (2) spontaneously self-assemble, and (3) thermodynamically, chemically, and enzymatically stable with a long shelf life. RNA building blocks exhibit each of the above. RNA is a polynucleic acid, making it a polymer, and its negative-charge prevents nonspecific binding to negatively charged cell membranes. The thermostability makes it suitable for logic gates, resistive memory, sensor set-ups, and NEM devices. RNA can be designed and manipulated with a level of simplicity of DNA while displaying versatile structure and enzyme activity of proteins. RNA can fold into single-stranded loops or bulges to serve as mounting dovetails for intermolecular or domain interactions without external linking dowels. RNA nanoparticles display rubber- and amoeba-like properties and are stretchable and shrinkable through multiple repeats, leading to enhanced tumor targeting and fast renal excretion to reduce toxicities. It was predicted in 2014 that RNA would be the third milestone in pharmaceutical drug development. The recent approval of several RNA drugs and COVID-19 mRNA vaccines by FDA suggests that this milestone is being realized. Here, we review the unique properties of RNA nanotechnology, summarize its recent advancements, describe its distinct attributes inside or outside the body and discuss potential applications in nanotechnology, medicine, and material science.

Ultra-thermostable RNA nanoparticles for solubilizing and high-yield loading of paclitaxel for breast cancer therapy

Paclitaxel is widely used in cancer treatments, but poor water-solubility and toxicity raise serious concerns. Here we report an RNA four-way junction nanoparticle with ultra-thermodynamic stability to solubilize and load paclitaxel for targeted cancer therapy. Each RNA nanoparticle covalently loads twenty-four paclitaxel molecules as a prodrug. The RNA-paclitaxel complex is structurally rigid and stable, demonstrated by the sub-nanometer resolution imaging of cryo-EM. Using RNA nanoparticles as carriers increases the water-solubility of paclitaxel by 32,000-fold. Intravenous injections of RNA-paclitaxel nanoparticles with specific cancer-targeting ligand dramatically inhibit breast cancer growth, with nearly undetectable toxicity and immune responses in mice. No fatalities are observed at a paclitaxel dose equal to the reported LD₅₀. The use of ultra-thermostable RNA nanoparticles to deliver chemical prodrugs addresses issues with RNA unfolding and nanoparticle dissociation after high-density drug loading. This finding provides a stable nano-platform for chemo-drug delivery as well as an efficient method to solubilize hydrophobic drugs.

Although paclitaxel is widely used as a chemotherapy, it suffers from poor solubility and toxicity issues. Here, the authors develop thermostable RNA nanoparticles and report the RNA-paclitaxel complex to display improved stability, drug loading capacity and solubility for improved targeted cancer therapy and reduced immune responses.

Assessment and comparison of thermal stability of phosphorothioate-DNA, DNA, RNA, 2'-F RNA, and LNA in the context of Phi29 pRNA 3WJ

The question of whether RNA is more stable or unstable compared to DNA or other nucleic acids has long been a subject of extensive scrutiny and public attention. Recently, thermodynamically stable and degradation-resistant RNA motifs have been utilized in RNA nanotechnology to build desired architectures and integrate multiple functional groups. Here we report the effects of phosphorothioate deoxyribonucleotides (PS-DNA), deoxyribonucleotides (DNA), ribonucleotides (RNA), 2'-F nucleotides (2'-F), and locked nucleic acids (LNA) on the thermal and in vivo stability of the three-way junction (3WJ) of bacteriophage phi29 motor packaging RNA. It was found that the thermal stability gradually increased following the order of PS-DNA/PS-DNA < DNA/DNA < DNA/RNA < RNA/RNA < RNA/2'-F RNA < 2'-F RNA/2'-F RNA < 2'-F RNA/LNA < LNA/LNA. This proposition is supported by studies on strand displacement and the melting of homogeneous and heterogeneous 3WJs. By simply mixing different chemically modified oligonucleotides, the thermal stability of phi29 pRNA 3WJ can be tuned to cover a wide range of melting temperatures from 21.2°C to over 95°C. The 3WJ_LNA was resistant to boiling temperature denaturation, urea denaturation, and 50% serum degradation. Intravenous injection of fluorescent LNA/2'-F hybrid 3WJs into mice revealed its exceptional in vivo stability and presence in urine. It is thus concluded that incorporation of LNA nucleotides, alone or in combination with 2'-F, into RNA nanoparticles derived from phi29 pRNA 3WJ can extend the half-life of the RNA nanoparticles in vivo and improve their pharmacokinetics profile.

Role of lysine binding residues in the global folding of the lysC riboswitch

Riboswitches regulate gene expression by rearranging their structure upon metabolite binding. The lysine-sensing lysC riboswitch is a rare example of an RNA aptamer organized around a 5-way helical junction in which ligand binding is performed exclusively through nucleotides located at the junction core. We have probed whether the nucleotides involved in ligand binding play any role in the global folding of the riboswitch. As predicted, our findings indicate that ligand-binding residues are critical for the lysine-dependent gene regulation mechanism. We also find that these residues are not important for the establishment of key magnesium-dependent tertiary interactions, suggesting that folding and ligand recognition are uncoupled in this riboswitch for the formation of specific interactions. However, FRET assays show that lysine binding results in an additional conformational change, indicating that lysine binding may also participate in a specific folding transition. Thus, in contrast to helical junctions being primary determinants in ribozymes and rRNA folding, we speculate that the helical junction of the lysine-sensing lysC riboswitch is not employed as structural a scaffold to direct global folding, but rather has a different role in establishing RNA-ligand interactions required for riboswitch regulation. Our work suggests that helical junctions may adopt different functions such as the coordination of global architecture or the formation of specific ligand binding site.

RNA as a stable polymer to build controllable and defined nanostructures for material and biomedical applications

The value of polymers is manifested in their vital use as building blocks in material and life sciences. Ribonucleic acid (RNA) is a polynucleic acid, but its polymeric nature in materials and technological applications is often overlooked due to an impression that RNA is seemingly unstable. Recent findings that certain modifications can make RNA resistant to RNase degradation while retaining its authentic folding property and biological function, and the discovery of ultra-thermostable RNA motifs have adequately addressed the concerns of RNA unstability. RNA can serve as a unique polymeric material to build varieties of nanostructures including nanoparticles, polygons, arrays, bundles, membrane, and microsponges that have potential applications in biomedical and material sciences. Since 2005, more than a thousand publications on RNA nanostructures have been published in diverse fields, indicating a remarkable increase of interest in the emerging field of RNA nanotechnology. In this review, we aim to: delineate the physical and chemical properties of polymers that can be applied to RNA; introduce the unique properties of RNA as a polymer; review the current methods for the construction of RNA nanostructures; describe its applications in material, biomedical and computer sciences; and, discuss the challenges and future prospects in this field.

From static to dynamic: the need for structural ensembles and a predictive model of RNA folding and function

To understand RNA, it is necessary to move beyond a descriptive categorization towards quantitative predictions of its molecular conformations and functional behavior. An incisive approach to understanding the function and folding of biological RNA systems involves characterizing small, simple components that are largely responsible for the behavior of complex systems including helix-junction-helix elements and tertiary motifs. State-of-the-art methods have permitted unprecedented insight into the conformational ensembles of these elements revealing, for example, that conformations of helix-junction-helix elements are confined to a small region of the ensemble, that this region is highly dependent on the junction's topology, and that the correct alignment of tertiary motifs may be a rare conformation on the overall folding landscape. Further characterization of RNA components and continued development of experimental and computational methods with the goal of quantitatively predicting RNA folding and functional behavior will be critical to understanding biological RNA systems.

Interconversion between parallel and antiparallel conformations of a 4H RNA junction in domain 3 of foot-and-mouth disease virus IRES captured by dynamics simulations

RNA junctions are common secondary structural elements present in a wide range of RNA species. They play crucial roles in directing the overall folding of RNA molecules as well as in a variety of biological functions. In particular, there has been great interest in the dynamics of RNA junctions, including conformational pathways of fully base-paired 4-way (4H) RNA junctions. In such constructs, all nucleotides participate in one of the four double-stranded stem regions, with no connecting loops. Dynamical aspects of these 4H RNAs are interesting because frequent interchanges between parallel and antiparallel conformations are thought to occur without binding of other factors. Gel electrophoresis and single-molecule fluorescence resonance energy transfer experiments have suggested two possible pathways: one involves a helical rearrangement via disruption of coaxial stacking, and the other occurs by a rotation between the helical axes of coaxially stacked conformers. Employing molecular dynamics simulations, we explore this conformational variability in a 4H junction derived from domain 3 of the foot-and-mouth disease virus internal ribosome entry site (IRES); this junction contains highly conserved motifs for RNA-RNA and RNA-protein interactions, important for IRES activity. Our simulations capture transitions of the 4H junction between parallel and antiparallel conformations. The interconversion is virtually barrier-free and occurs via a rotation between the axes of coaxially stacked helices with a transient perpendicular intermediate. We characterize this transition, with various interhelical orientations, by pseudodihedral angle and interhelical distance measures. The high flexibility of the junction, as also demonstrated experimentally, is suitable for IRES activity. Because foot-and-mouth disease virus IRES structure depends on long-range interactions involving domain 3, the perpendicular intermediate, which maintains coaxial stacking of helices and thereby consensus primary and secondary structure information, may be beneficial for guiding the overall organization of the RNA system in domain 3.

Riboswitch control of aminoglycoside antibiotic resistance

The majority of riboswitches are regulatory RNAs that regulate gene expression by binding small-molecule metabolites. Here we report the discovery of an aminoglycoside-binding riboswitch that is widely distributed among antibiotic-resistant bacterial pathogens. This riboswitch is present in the leader RNA of the resistance genes that encode the aminoglycoside acetyl transferase (AAC) and aminoglycoside adenyl transferase (AAD) enzymes that confer resistance to aminoglycoside antibiotics through modification of the drugs. We show that expression of the AAC and AAD resistance genes is regulated by aminoglycoside binding to a secondary structure in their 5' leader RNA. Reporter gene expression, direct measurements of drug RNA binding, chemical probing, and UV crosslinking combined with mutational analysis demonstrate that the leader RNA functions as an aminoglycoside-sensing riboswitch in which drug binding to the leader RNA leads to the induction of aminoglycosides antibiotic resistance.

The functional exchangeability of pk- and k-turns in RNA structure

Ribonuclease P RNA requires a sharply kinked RNA helix to make a loop-receptor interaction that creates the binding site for the substrate. In some forms of the ribozyme, this is accomplished by a k-turn, while others have a different element called the pk-turn. The structure of the pk-turn in RNase P of Thermotoga maritima is globally very similar to a k-turn, but lacks all the standard features of that structure, including long-range hydrogen bonds between the two helical arms. We show here that in an isolated RNA duplex, the pk-turn fails to adopt a tightly kinked structure, but rather is a flexible element. This suggests that the tertiary contacts of RNase P assist its folding into the required kinked structure. We find that we can replace the k-turn of the SAM-I riboswitch with the pk-turn, such that the resulting RNA retains its ability to bind SAM, although with lower affinity. We also find that we can replace the pk-turn of T. maritima RNase P with a standard k-turn (in either orientation) with retention of ribozyme activity. Thus, although the pk-turn cannot intrinsically fold into the kinked structure, it can be induced to fold correctly in context. And the pk-turn and k-turns can substitute functionally for one another.

Predicting and modeling RNA architecture

A general approach for modeling the architecture of large and structured RNA molecules is described. The method exploits the modularity and the hierarchical folding of RNA architecture that is viewed as the assembly of preformed double-stranded helices defined by Watson-Crick base pairs and RNA modules maintained by non-Watson-Crick base pairs. Despite the extensive molecular neutrality observed in RNA structures, specificity in RNA folding is achieved through global constraints like lengths of helices, coaxiality of helical stacks, and structures adopted at the junctions of helices. The Assemble integrated suite of computer tools allows for sequence and structure analysis as well as interactive modeling by homology or ab initio assembly with possibilities for fitting within electronic density maps. The local key role of non-Watson-Crick pairs guides RNA architecture formation and offers metrics for assessing the accuracy of three-dimensional models in a more useful way than usual root mean square deviation (RMSD) values.

Functional organization of the Sm core in the crystal structure of human U1 snRNP

U1 small nuclear ribonucleoprotein (snRNP) recognizes the 5'-splice site early during spliceosome assembly. It represents a prototype spliceosomal subunit containing a paradigmatic Sm core RNP. The crystal structure of human U1 snRNP obtained from natively purified material by in situ limited proteolysis at 4.4 Å resolution reveals how the seven Sm proteins, each recognize one nucleotide of the Sm site RNA using their Sm1 and Sm2 motifs. Proteins D1 and D2 guide the snRNA into and out of the Sm ring, and proteins F and E mediate a direct interaction between the Sm site termini. Terminal extensions of proteins D1, D2 and B/B', and extended internal loops in D2 and B/B' support a four-way RNA junction and a 3'-terminal stem-loop on opposite sides of the Sm core RNP, respectively. On a higher organizational level, the core RNP presents multiple attachment sites for the U1-specific 70K protein. The intricate, multi-layered interplay of proteins and RNA rationalizes the hierarchical assembly of U snRNPs in vitro and in vivo.

Structure of the three-way helical junction of the hepatitis C virus IRES element

The hepatitis C virus internal ribosome entry site (IRES) element contains a three-way junction that is important in the overall RNA conformation, and for its role in the internal initiation of translation. The junction also illustrates some important conformational principles in the folding of three-way helical junctions. It is formally a 3HS(4) junction, with the possibility of two alternative stacking conformers. However, in principle, the junction can also undergo two steps of branch migration that would form 2HS(1)HS(3) and 2HS(2)HS(2) junctions. Comparative gel electrophoresis and ensemble fluorescence resonance energy transfer (FRET) studies show that the junction is induced to fold by the presence of Mg(2+) ions in low micromolar concentrations, and suggest that the structure adopted is based on coaxial stacking of the two helices that do not terminate in a hairpin loop (i.e., helix IIId). Single-molecule FRET studies confirm this conclusion, and indicate that there is no minor conformer present based on an alternative choice of helical stacking partners. Moreover, analysis of single-molecule FRET data at an 8-msec resolution failed to reveal evidence for structural transitions. It seems probable that this junction adopts a single conformation as a unique and stable fold.

Comparative gel electrophoresis analysis of helical junctions in RNA

Comparative gel electrophoresis provides information on the relative angles subtended between helical arms at a branchpoint in RNA. It is based upon the comparison of electrophoretic mobility in polyacrylamide gels of species containing two long arms, with the remaining one(s) being significantly shorter. Although the method currently lacks a really well-established basis of physical theory, it is very powerful, yet simple to apply. It has had a number of significant successes in RNA, DNA and DNA-protein complexes, and in all cases to date the results have stood the test of time and eventual comparison with crystallographic analysis.

Analysis of branched nucleic acid structure using comparative gel electrophoresis

Electrophoresis in polyacrylamide gels provides a simple yet powerful means of analyzing the relative disposition of helical arms in branched nucleic acids. The electrophoretic mobility of DNA or RNA with a central discontinuity is determined by the angle subtended between the arms radiating from the branchpoint. In a multi-helical branchpoint, comparative gel electrophoresis can provide a relative measure of all the inter-helical angles and thus the shape and symmetry of the molecule. Using the long-short arm approach, the electrophoretic mobility of all the species with two helical arms that are longer than all others is compared. This can be done as a function of conditions, allowing the analysis of ion-dependent folding of branched DNA and RNA species. Notable successes for the technique include the four-way (Holliday) junction in DNA and helical junctions in functionally significant RNA species such as ribozymes. Many of these structures have subsequently been proved correct by crystallography or other methods, up to 10 years later in the case of the Holliday junction. Just as important, the technique has not failed to date. Comparative gel electrophoresis can provide a window on both fast and slow conformational equilibria such as conformer exchange in four-way DNA junctions. But perhaps the biggest test of the approach has been to deduce the structures of complexes of four-way DNA junctions with proteins. Two recent crystallographic structures show that the global structures were correctly deduced by electrophoresis, proving the worth of the method even in these rather complex systems. Comparative gel electrophoresis is a robust method for the analysis of branched nucleic acids and their complexes.

The 5′ End of U2 snRNA Is in Close Proximity to U1 and Functional Sites of the Pre-mRNA in Early Spliceosomal Complexes

Recognition and pairing of the correct 5' and 3' splice sites (ss) of a pre-mRNA are critical events that occur early during spliceosome assembly. Little is known about the spatial organization in early spliceosomal complexes of the U1 and U2 snRNPs, which together with several non-snRNP proteins, are involved in juxtapositioning the functional sites of the pre-mRNA. To better understand the molecular mechanisms of splice-site recognition/pairing, we have examined the organization of U2 relative to U1 and pre-mRNA in spliceosomal complexes via hydroxyl-radical probing with Fe-BABE-tethered U2 snRNA. These studies reveal that functional sites of the pre-mRNA are located close to the 5' end of U2 both in E and A complexes. U2 is also positioned close to U1 in a defined orientation already in the E complex, and their relative spatial organization remains largely unchanged during the E to A transition.

Structural methods for studying IRES function

Internal ribosome entry sites (IRESs) substitute RNA sequences for some or all of the canonical translation initiation protein factors. Therefore, an important component of understanding IRES function is a description of the three-dimensional structure of the IRES RNA underlying this mechanism. This includes determining the degree to which the RNA folds, the global RNA architecture, and higher resolution information when warranted. Knowledge of the RNA structural features guides ongoing mechanistic and functional studies. In this chapter, we present a roadmap to structurally characterize a folded RNA, beginning from initial studies to define the overall architecture and leading to high-resolution structural studies. The experimental strategy presented here is not unique to IRES RNAs but is adaptable to virtually any RNA of interest, although characterization of RNA-protein interactions requires additional methods. Because IRES RNAs have a specific function, we present specific ways in which the data are interpreted to gain insight into that function. We provide protocols for key experiments that are particularly useful for studying IRES RNA structure and that provide a framework onto which additional approaches are integrated. The protocols we present are solution hydroxyl radical probing, RNase T1 probing, native gel electrophoresis, sedimentation velocity analytical ultracentrifugation, and strategies to engineer RNA for crystallization and to obtain initial crystals.

Electrostatic Interactions and the Folding of the Four-way DNA Junction: Analysis by Selective Methyl Phosphonate Substitution

The structure and dynamics of the four-way (Holliday) junction are strongly dependent on the presence of metal ions. In this study, the importance of phosphate charge in and around the point of strand exchange has been explored by selective replacement with electrically neutral methyl phosphonate groups, guided by crystal structures of the junction in the folded, stacked X conformation. Junction conformation has been analysed by comparative gel electrophoresis and fluorescence resonance energy transfer (FRET). Three of sets of phosphate groups on the exchanging strands have been analysed; those at the point of strand exchange and those to their 3' and 5' sides. The exchanging and 3' phosphate groups form a box of negatively charged groups on the minor groove face of the junction, while the 5' phosphate groups face each other on the major groove side, with their proR oxygen atoms directed at one another. The largest effects are observed on substitution of the exchanging phosphate groups; replacement of both groups leads to the loss of the requirement for addition of metal ions to allow junction folding. When the equivalent phosphate groups on the continuous strands were substituted, a proportion of the junction folded into the alternative conformer so as to bring these phosphate groups onto the exchanging strands. These species did not interconvert, and thus this is likely to result from the alternative diasteromeric forms of the methyl phosphonate group. This shows that some of the conformational effects result from more than purely electrostatic interactions. Smaller but significant effects were observed on substitution of the flanking phosphate groups. All methyl phosphonate substitutions at these positions allowed folding to proceed at a reduced concentration of magnesium ions, with double substitutions more effective than single substitutions. Substitution of 5' phosphates resulted in a greater degree of folding at a given ionic concentration compared to the corresponding 3' phosphate substitutions. These results show that the phosphate groups at the point of strand exchange exert the largest electrostatic effect on junction folding, but a number of phosphate groups in the vicinity of the exchange region contribute to the overall effects.

Conformational flexibility of four-way junctions in RNA

Helical junctions are common architectural features in RNA. They are particularly important in autonomously folding molecules, as exemplified by the hairpin ribozyme. We have used single-molecule fluorescence spectroscopy to study the dynamic properties of the perfect (4H) four-way helical junction derived from the hairpin ribozyme. In the presence of Mg(2+), the junction samples parallel and antiparallel conformations and both stacking conformers, with a bias towards one antiparallel stacking conformer. There is continual interconversion between the forms, such that there are several transitions per second under physiological conditions. Our data suggest that interconversion proceeds via an open intermediate with reduced cation binding in which coaxial stacking between helices is disrupted. The rate of interconversion becomes slower at higher Mg(2+) concentrations, yet the activation barrier decreases under these conditions, indicating that entropic effects are important. Transitions also occur in the presence of Na(+) only; however, the coaxial stacking appears incomplete under these conditions. The polymorphic and dynamic character of the four-way RNA junction provides a source of structural diversity, from which particular conformations required for biological function might be stabilised by additional RNA interactions or protein binding.

The dynamic nature of the four-way junction of the hepatitis C virus IRES

Translation is initiated within the RNA of the hepatitis C virus at the internal ribosome entry site (IRES). The IRES is a 341-nucleotide element that contains a four-way helical junction (IIIabc) as a functionally important element of the secondary structure. The junction has three additional, nonpaired nucleotides at the point of strand exchange on one diagonal. We have studied the global conformation and folding of this junction in solution, using comparative gel electrophoresis and steady-state and time-resolved fluorescence resonance energy transfer. In the absence of divalent metal ions, the junction adopts an extended-square structure, in contrast to perfect four-way RNA junctions, which retain coaxial helical stacking under all conditions. The IIIabc junction is induced to fold on addition of Mg(2+), by pairwise coaxial stacking of arms, into the conformer in which the unpaired bases are located on the exchanging strands. Fluorescence lifetime measurements indicate that in the presence of Mg(2+) ions, the IIIabc junction exists in a dynamic equilibrium comprising approximately equal populations of antiparallel and parallel species. These dynamic properties may be important in mediating interactions between the IRES and the ribosome and initiation factors.

The complex between a four-way DNA junction and T7 endonuclease I

The junction-resolving enzyme endonuclease I is selective for the structure of the DNA four-way (Holliday) junction. The enzyme binds to a four-way junction in two possible orientations, with a 4:1 ratio, opening the DNA structure at the centre and changing the global structure into a 90 degrees cross of approximately coaxial helices. The nuclease cleaves the continuous strands of the junction in each orientation. Binding leads to pronounced regions of protection of the DNA against hydroxyl radical attack. Using all this information together with the known structure of the enzyme and the structure of the BglI-DNA complex, we have constructed a model of the complex of endonuclease I and a DNA junction. This shows how the enzyme is selective for the structure of a four-way junction, such that both continuous strands can be accommodated into the two active sites so that a productive resolution event is possible.

Four-way junctions in antisense RNA-mRNA complexes involved in plasmid replication control: a common theme?

In several groups of bacterial plasmids, antisense RNAs regulate copy number through inhibition of replication initiator protein synthesis. In plasmid R1, we have recently shown that the inhibitory complex between the antisense RNA (CopA) and its target mRNA (CopT) is characterized by the formation of two intermolecular helices, resulting in a four-way junction structure and a side-by-side helical alignment. Based on lead-induced cleavage and ribonuclease (RNase) V(1) probing combined with molecular modeling, a strikingly similar topology is supported for the complex formed between the antisense RNA (Inc) and mRNA (RepZ) of plasmid Col1b-P9. In particular, the position of the four-way junction and the location of divalent ion-binding site(s) indicate that the structural features of these two complexes are essentially the same in spite of sequence differences. Comparisons of several target and antisense RNAs in other plasmids further indicate that similar binding pathways are used to form the inhibitory antisense-target RNA complexes. Thus, in all these systems, the structural features of both antisense and target RNAs determine the topologically possible and kinetically favored pathway that is essential for efficient in vivo control.

Structure, folding and activity of the VS ribozyme: importance of the 2-3-6 helical junction

The VS nucleolytic ribozyme has a core comprising five helices organized by two three-way junctions. The ribozyme can act in trans on a hairpin-loop substrate, with which it interacts via tertiary contacts. We have determined that one of the junctions (2-3-6) undergoes two-stage ion-dependent folding into a stable conformation, and have determined the global structure of the folded junction using long-range distance restraints derived from fluorescence resonance energy transfer. A number of sequence variants in the junction are severely impaired in ribozyme cleavage, and there is good correlation between changes in activity and alteration in the folding of junction 2-3-6. These studies point to a special importance of G and A nucleotides immediately adjacent to helix II, and comparison with a similar junction of known structure indicates that this could adopt a guanine-wedge structure. We propose that the 2-3-6 junction organizes important aspects of the structure of the ribozyme to facilitate productive association with the substrate, and suggest that this results in an interaction between the substrate and the A730 loop to create the active complex.

Fission yeast nascent polypeptide-associated complex binds to four-way DNA junctions

The four-way DNA junction (X-junction) is both a central intermediate of recombination reactions and, in some cases, a controlling element in transcription and the initiation of DNA replication. Many different proteins have been found to bind to X-junctions in a structure-specific manner. In some cases, this ability only reflects the proteins' general predilection for distorted DNAs but in others the interaction is highly specific and usually signifies that the X-junction is the real target for the protein in vivo. Here we identify the Schizosaccharomyces pombe (Sp) nascent polypeptide associated complex (NAC) as a potent binder of X-junction DNA. NAC is highly conserved in eukaryotes and has reported functions in transcription and the targeting of proteins within the cytosol. NAC is composed of alpha and beta subunits. Each SpNAC subunit has the capacity to bind X-junction DNA, but optimal binding depends on a heterodimer of subunits. Competition assays and binding comparisons using a range of different DNA substrates reveal that SpNAC is highly selective for the X-junction structure. By comparative gel electrophoresis we show that the X-junction is held in its open square conformation when bound by SpNAC. Junction binding is inhibited by concentrations of magnesium ions that are sufficient to "stack" the X-junction, suggesting that SpNAC recognises only the open junction structure. Finally, SpNAC can bind to X-junctions that are already bound by a tetramer of the Escherichia coli RuvA protein, indicating that it interacts with only one face of the junction. The possible biological significance of X-junction binding by SpNAC is discussed.

Folding of branched RNA species

The global structures of branched RNA species are important to their function. Branched RNA species are defined as molecules in which double-helical segments are interrupted by abrupt discontinuities. These include helical junctions of different orders, and base bulges and loops. Common helical junctions are three- and four-way junctions, often interrupted by mispairs or additional nucleotides. There are many interesting examples of functional RNA junctions, including the hammerhead and hairpin ribozymes, and junctions that serve as binding sites for proteins. The junctions display some common structural properties. These include a tendency to undergo pairwise helical stacking and ion-induced conformational transitions. Helical branchpoints can act as key architectural components and as important sites for interactions with proteins. Copyright 1999 John Wiley & Sons, Inc.

Arrangement of RNA and proteins in the spliceosomal U1 small nuclear ribonucleoprotein particle

In eukaryotic cells, freshly synthesized messenger RNA (pre-mRNA) contains stretches of non-coding RNA that must be excised before the RNA can be translated into protein. Their removal is catalysed by the spliceosome, a large complex formed when a number of small nuclear ribonucleoprotein particles (snRNPs) bind sequentially to the pre-mRNA. The first snRNP to bind is called U1; other snRNPs (U2, U4/U6 and U5) follow. Here we describe the three-dimensional structure of human U1 snRNP, determined by single-particle electron cryomicroscopy at 10 A resolution. The reconstruction reveals a doughnut-shaped central element that accommodates the seven Sm proteins common to all snRNPs, supporting a proposed model of circular Sm protein arrangement. By taking earlier biochemical results into account, we were able to assign the remaining density of the map to the other known components of U1 snRNP, deriving a structural model that describes the three-dimensional arrangement of proteins and RNA in U1 snRNP.

Atomic force microscopy of parallel DNA branched junction arrays

BACKGROUND

The four arms of the Holliday junction are known to stack in pairs forming two helical domains whose orientations are antiparallel, but twisted positively by about 60 degrees, based on electrophoretic, FRET and AFM measurements. Recent gel retardation studies suggest that a bowtie junction (containing 5',5' and 3',3' linkages in its crossover strands) may adopt a parallel conformation.

RESULTS

An AFM study of two-dimensional arrays produced by parallelograms of bowtie junctions shows that the angle between helical domains is in the range of -68+/-2 degrees. We demonstrate by AFM that the domains are parallel by constructing V-shaped structures whose arms are separated by approximately 68 degrees and approximately 112 degrees.

CONCLUSIONS

The arms of the bowtie junction are parallel rather than antiparallel. The parallel or antiparallel nature of the junction apparently is determined by the local structure of the junction, but the sign of the angle appears to be a consequence of interarm electrostatic interactions.

Function of tyrosyl-tRNA synthetase in splicing group I introns: an induced-fit model for binding to the P4-P6 domain based on analysis of mutations at the junction of the P4-P6 stacked helices

We used an Escherichia coli genetic assay based on the phage T4 td intron to test the ability of the Neurospora crassa mitochondrial tyrosyl-tRNA synthetase (CYT-18 protein) to suppress mutations that cause structural defects around its binding site in the P4-P6 domain of the group I intron catalytic core. We analyzed all possible combinations of nucleotides at either P4 bp-1 or P6 bp-1, which together form the junction of the P4-P6 stacked helices, and looked for synergistic effects in double mutants. Most mutations at either position inhibit self-splicing, but can be suppressed by CYT-18. CYT-18 can compensate efficiently for mutations that disrupt base-pairing at either P4 bp-1 or P6 bp-1, for mutations at P6 bp-1 that disrupt the base-triple interaction with J3/4-3, and for nucleotide substitutions at either position that are predicted to be suboptimal for base stacking, based on the analysis of DNA four-way junctions. However, CYT-18 has difficulty suppressing combinations of mutations at P4 bp-1 and P6 bp-1 that simultaneously disrupt base-pairing and base stacking. Thermal denaturation and Fe(II)-EDTA analysis showed that mutations at the junction of the P4-P6 stacked helices lead to grossly impaired tertiary-structure formation centered in the P4-P6 domain. CYT-18-suppressible mutants bind the protein with K(d) values up to 79-fold higher than that for the wild-type intron, but in all cases tested, the k(off) value for the complex remains within twofold of the wild-type value, suggesting that the binding site can be formed properly and that the increased K(d) value reflects primarily an increased k(on) value for the binding of CYT-18 to the misfolded intron. Our results indicate that the P4/P6 junction is a linchpin region, where even small nucleotide substitutions grossly disrupt the catalytically-active group I intron tertiary structure, and that CYT-18 binding induces the formation of the correct structure in this region, leading to folding of the group I intron catalytic core.

Coordinated control of XerC and XerD catalytic activities during Holliday junction resolution

Site-specific recombinases XerC and XerD function in the segregation of circular bacterial replicons. In a recombining nucleoprotein complex containing two molecules each of XerC and XerD, coordinated reciprocal switches in recombinase activity ensure that only XerC or XerD is active at any one time. Mutated recombinases that carry sub?stitutions of a catalytic arginine residue stimulate cleavage and strand exchange mediated by the partner recombinase on DNA substrates that are normally recombined poorly by the partner. This is associated with a reciprocal impairment of the recombinase's own ability to initiate catalysis. The extent of this switch in catalysis is modulated by changes in recombination site sequence and is not a direct consequence of any catalytic defect. We propose that altered interactions between the mutated proteins and their wild-type partners lead to an increased level of an alternative Holliday junction intermediate that has a conformation appropriate for resolution by the partner recombinase. The results indicate how subtle changes in protein-DNA architecture at a Holliday junction can redirect recombination outcome.

Reciprocal control of catalysis by the tyrosine recombinases XerC and XerD: an enzymatic switch in site-specific recombination

In Xer site-specific recombination, sequential DNA strand exchange reactions are catalyzed by a heterotetrameric complex composed of two recombinases, XerC and XerD. It is demonstrated that XerC and XerD catalytic activity is controlled by an interaction involving the C-terminal end of each protein (the donor region) and an internal region close to the active site (the acceptor region). Mutations in these regions reciprocally alter the relative activity of XerC and XerD, with their combination producing synergistic effects on catalysis. The data support a model in which C-terminal intersubunit interactions contribute to coupled protein-DNA conformational changes that lead to sequential activation and reciprocal inhibition of pairs of active sites in the recombinase tetramer during recombination.

The hepatitis C virus internal ribosome entry site adopts an ion-dependent tertiary fold

Hepatitis C virus (HCV) contains an internal ribosome entry site (IRES) located in the 5' untranslated region of the genomic RNA that drives cap-independent initiation of translation of the viral message. The approximate secondary structure and minimum functional length of the HCV IRES are known, and extensive mutagenesis has established that nearly all secondary structural domains are critical for activity. However, the presence of an IRES RNA tertiary fold and its functional relevance have not been established. Using chemical and enzymatic probes of the HCV IRES RNA in solution, we show that the IRES adopts a unique three-dimensional structure at physiological salt concentrations in the absence of additional cofactors or the translation apparatus. Folding of the IRES involves cooperative uptake of magnesium and is driven primarily by charge neutralization. This tertiary structure contains at least two independently folded regions which closely correspond to putative binding sites for the 40 S ribosomal subunit and initiation factor 3 (eIF3). Point mutations that inhibit IRES folding also inhibit its function, suggesting that the IRES tertiary structure is essential for translation initiation activity. Chemical and enzymatic probing data and small-angle X-ray scattering (SAXS) experiments in solution show that upon folding, the IRES forms an extended structure in which functionally important loops are exposed. These results suggest that the 40 S ribosomal subunit and eIF3 bind an HCV IRES that is prefolded to spatially organize recognition domains.

Folding and catalysis by the hairpin ribozyme

The hairpin ribozyme undergoes a site-specific transesterification cleavage of the phosphodiester backbone. The natural form of the ribozyme is a four-way helical junction, where two arms contain unpaired loops. This folds by pairwise coaxial stacking of helical arms, and a rotation into an antiparallel conformation in which there is close association between the loops. This probably generates the local conformation required to facilitate the trajectory into an in-line SN2 transition state. Folding is induced by the cooperative binding of at least two divalent metal ions, which are probably distributed between the junction and the loop-loop interface. The junction forms the structural scaffold on which the geometry of the ribozyme is built, and structural perturbation of the junction leads to impaired catalytic activity.

Excess counterion binding and ionic stability of kinked and branched DNA

We compute the excess number of counterions associated with kinked and branched DNA, and the ionic stabilities of these structures as a function of chain length and both sodium and magnesium salt concentration, using numerical counterion condensation theory. The DNA structures are modeled as two or more finite lines of phosphate charges radiating from the kink or junction center. The number of excess counterions around the (40-90 degrees) kinked duplex is very small (at most four). The geometries of large three- and four-way DNA junctions (with > 50 base pairs per arm) in solutions containing low to moderate NaCl concentrations, by contrast, accumulate a substantial number of excess sodium ions (> 20) but no more than 15 magnesium counterions. The excess number of counterions surrounding the kinked linear chain and the branched DNA structures either remains invariant or increases with chain length, tending to reach a plateau value. Open configurations, such as the planar Y-shaped three-way junction (with three 120 degrees inter-arm angles) and the 90 degrees cross-shaped four-way junction, are ionically more stable than compact geometries, such as pyramidal three-way junctions and X-shaped four-way junctions, over the entire range of salt concentration considered (10(-5)-10(-1) M NaCl or MgCl2). The ionic stabilities of the compact forms increase with increasing salt concentration and become comparable to those of the extended geometries at high salt (especially when magnesium is the supporting salt).

Sequence-specificity of Holliday junction resolution: identification of RuvC mutants defective in metal binding and target site recognition

The RuvC protein of Escherichia coli resolves Holliday intermediates in recombination and DNA repair by a dual strand incision mechanism targeted to specific DNA sequences located symmetrically at the crossover. Two classes of amino acid substitutions are described that provide new insights into the sequence-specificity of the resolution reaction. The first includes D7N and G14S, which modify or eliminate metal binding and prevent catalysis. The second, defined by G114D, G114N, and A116T, interfere with the ability of RuvC to cleave at preferred sequences, but allow resolution at non-consensus target sites. All five mutant proteins bind junction DNA and impose an open conformation. D7N and G14S fail to induce hypersensitivity to hydroxyl radicals, a property of RuvC previously thought to reflect junction opening. A different mechanism is proposed whereby ferrous ions are co-ordinated in the complex to induce a high local concentration of radicals. The open structure imposed by wild-type RuvC in Mg2+ is similar to that observed previously using a junction with a different stacking preference. G114D and A116T impose slightly altered structures. This subtle change may be sufficient to explain the failure of these proteins to cleave the sequences normally preferred. Gly114 and Ala116 residues link two alpha-helices lining the wall of the catalytic cleft in each subunit of RuvC. We suggest that substitutions at these positions realign these helices and interfere with the ability to establish base-specific contacts at resolution hotspots.

Folding of the hairpin ribozyme in its natural conformation achieves close physical proximity of the loops

The hairpin ribozyme is a self-cleaving motif found in the negatives strand of the satellite RNA of some plant viruses. In its natural context, the ribozyme comprises four helices, two of which contain conserved formally unpaired loops, that are adjacent arms of a four-way RNA junction. We show that the arms that would carry these loops are brought close together in the global conformation of the isolated junction. Using fluorescence resonance energy transfer, we demonstrate a two-magnesium ion-dependent conformational transition of the complete ribozyme that brings the loopbearing arms into close physical proximity. The ribozyme is active as a four-way junction, and the rate of cleavage may be modulated by the conformation of the four-way junction.

Structural alterations and conformational dynamics in Holliday junctions induced by binding of a site-specific recombinase

Binding of a cleavage-incompetent mutant of the Flp recombinase induces a roughly square-planar geometry in synthetic immobile Holliday junctions. The branch points, which are rigidly fixed in these junctions in their free forms, tend to be more flexible in their protein-bound forms. Our results (1) suggest a plausible mechanism for the switching of the recombination complex from the Holliday-forming mode to the Holliday-resolving mode, (2) provide a rationale for previous observations that Flp resolves preformed immobile Holliday structures in the parental or in the recombinant mode in a relatively unbiased manner, and (3) accommodate two modes of DNA cleavage by Flp (transhorizontal or transdiagonal) in Holliday substrates.

The hairpin ribozyme: structure, assembly and catalysis

Recent studies of the hairpin ribozyme have revealed a distinct catalytic mechanism for this small RNA motif. Inner-sphere coordinated metal ions are not required, as the inert metal ion complex cobalt hexammine promotes catalysis. Detailed kinetic analyses have defined rates of individual steps in the catalytic cycle. Functional group modification, NMR studies of subdomains and cross-linking experiments, in combination with computer modeling, have led to a proposal for domain interactions in the substrate-ribozyme complex.

Ion-induced folding of the hammerhead ribozyme: a fluorescence resonance energy transfer study

The ion-induced folding transitions of the hammerhead ribozyme have been analysed by fluorescence resonance energy transfer. The hammerhead ribozyme may be regarded as a special example of a three-way RNA junction, the global structure of which has been studied by comparing the distances (as energy transfer efficiencies) between the ends of pairs of labelled arms for the three possible end-to-end vectors as a function of magnesium ion concentration. The data support two sequential ion-dependent transitions, which can be interpreted in the light of the crystal structures of the hammerhead ribozyme. The first transition corresponds to the formation of a coaxial stacking between helices II and III; the data can be fully explained by a model in which the transition is induced by a single magnesium ion which binds with an apparent association constant of 8000-10 000 M-1. The second structural transition corresponds to the formation of the catalytic domain of the ribozyme, induced by a single magnesium ion with an apparent association constant of approximately 1100 M-1. The hammerhead ribozyme provides a well-defined example of ion-dependent folding in RNA.

Nucleic acid structure and recognition

We review the global structures adopted by branched nucleic acids, including three- and four-way helical junctions in DNA and RNA. We find that some general folding principles emerge. First, all the structures exhibit a tendency to undergo pairwise coaxial helical stacking when permitted by the local stereochemistry of strand exchange. Second, metal ions generally play an important role in facilitating folding of branched nucleic acids. These principles can be applied to functionally important branched nucleic acids, such as the Holliday DNA junction of genetic recombination, and the hammerhead ribozyme in RNA.

Progress toward the structure and therapeutic use of the hairpin ribozyme

The hairpin ribozyme is one of a number of small catalytic RNAs that are excellent paradigms for RNA structure-function analysis and have potential also as therapeutic agents. This review outlines current understanding of the structure of the hairpin ribozyme and its basis for catalytic activity. Included also is a discussion of the functional group requirements for cleavage and the first steps being taken to understanding its folding. Finally, recent developments are highlighted in engineering the hairpin ribozyme for intracellular use as a potential gene therapy agent.

The isomeric preference of Holliday junctions influences resolution bias by lambda integrase

Lambda site-specific recombination proceeds by a pair of sequential strand exchanges that first generate and then resolve a Holliday junction intermediate. A family of synthetic Holliday junctions with the branch point constrained to the center of the 7 bp overlap region was used to show that resolution of the top strands and resolution of the bottom strands are symmetrical but stereochemically distinct processes. Lambda integrase is sensitive to isomeric structure, preferentially resolving the pair of strands that are crossed in the protein-free Holliday junction. At the branch point of stacked immobile Holliday junctions, the number of purines is preferentially maximized in the crossed (versus continuous) strands if there is an inequality of purines between strands of opposite polarity. This stacking preference was used to anticipate the resolution bias of freely mobile junctions and thereby to reinforce the conclusions with monomobile junctions. The results provide a strong indication that in the complete recombination reaction a restacking of helices occurs between the top and bottom strand exchanges.

The decline in human Alu retroposition was accompanied by an asymmetric decrease in SRP9/14 binding to dimeric Alu RNA and increased expression of small cytoplasmic Alu RNA

Alu interspersed elements are inserted into the genome by a retroposition process that occurs via dimeric Alu RNA and causes genetic disorders in humans. Alu RNA is labile and can be diverted to a stable left monomer transcript known as small cytoplasmic Alu (scAlu) RNA by RNA 3' processing, although the relationship between Alu RNA stability, scAlu RNA production, and retroposition has been unknown. In vivo, Alu and scAlu transcripts interact with the Alu RNA-binding subunit of signal recognition particle (SRP) known as SRP9/14. We examined RNAs corresponding to Alu sequences that were differentially active during primate evolution, as well as an Alu RNA sequence that is currently active in humans. Mutations that accompanied Alu RNA evolution led to changes in a conserved structural motif also found in SRP RNAs that are associated with thermodynamic destabilization and decreased affinity of the Alu right monomer for SRP9/14. In contrast to the right monomer, the Alu left monomer maintained structural integrity and high affinity for SRP9/14, indicating that scAlu RNA has been under selection during human evolution. Loss of Alu right monomer affinity for SRP9/14 is associated with scAlu RNA production from Alu elements in vivo. Moreover, the loss in affinity coincided with decreased rates of Alu amplification during primate evolution. This indicates that stability of the Alu right monomer is a critical determinant of Alu retroposition. These results provide insight into Alu mobility and evolution and into how retroposons may interact with host proteins during genome evolution.

Hierarchy and dynamics of RNA folding

The evidence showing that the self-assembly of complex RNAs occurs in discrete transitions, each relating to the folding of sub-systems of increasing size and complexity starting from a state with most of the secondary structure, is reviewed. The reciprocal influence of the concentration of magnesium ions and nucleotide mutations on tertiary structure is analyzed. Several observations demonstrate that detrimental mutations can be rescued by high magnesium concentrations, while stabilizing mutations lead to a lesser dependence on magnesium ion concentration. Recent data point to the central controlling and monitoring roles of RNA-binding proteins that can bind to the different folding stages, either before full establishment of the secondary structure or at the molten globule state before the cooperative transition to the final three-dimensional structure.