Precision of and new methods for testing in vitro alloy cytotoxicity

Biocompatibility of Polymer and Ceramic CAD/CAM Materials with Human Gingival Fibroblasts (HGFs)

Four polymer and ceramic computer-aided design/computer-aided manufacturing (CAD/CAM) materials from different manufacturers (VITA CAD-Temp (polymethyl methacrylate, PMMA), Celtra Duo (zirconia-reinforced lithium silicate ceramic, ZLS), IPS e.max CAD (lithium disilicate (LS₂)), and VITA YZ (yttrium-tetragonal zirconia polycrystal, Y-TZP)) were tested to evaluate the cytotoxic effects and collagen type I secretions on human gingival fibroblasts (HGFs). A total of 160 disc-shaped samples (Ø: 10 ± 2 mm; h: 2 mm) were milled from commercial blanks and blocks. Direct-contact cytotoxicity assays were evaluated at 24, 48, and 72 h, and collagen type I (COL1) secretions were analysed by cell-based ELISA at 24 and 72 h. Both experiments revealed statistically significant differences (p < 0.05). At 24 and 48 h of contact, cytotoxic potential was observed for all materials. Later, at 72 h, all groups reached biologically acceptable levels. LS₂ showed the best results regarding cell viability and collagen secretion in all of the time evaluations, while Y-TZP and ZLS revealed intermediate results, and PMMA exhibited the lowest values in both experiments. At 72 h, all groups showed sharp decreases in COL1 secretion regarding the 24-h values. According to the results obtained and the limitations of the present in vitro study, it may be concluded that the ceramic materials revealed a better cell response than the polymers. Nevertheless, further studies are needed to consolidate these findings and thus extrapolate the results into clinical practice.

Fabricating high mechanical strength γ-Fe2O3 nanoparticles filled poly(vinyl alcohol) nanofiber using electrospinning process potentially for tissue engineering scaffold

The use of electrospinning has gained substantial interest in the development of tissue engineering scaffolds due to its ability to produce nanoscale fibers which can mimic the geometry of extracellular tissues. Besides geometry, mechanical property is one of the main elements to be considered when developing tissue engineering scaffolds. In this study, the electrospinning process parameter settings were varied in order to find the optimum setting which can produce electrospun nanofibrous mats with good mechanical properties. Maghemite (γ-Fe2O3) was mixed with poly(vinyl alcohol) and then electrospun to form nanofibers. The five input variable factors involved were nanoparticles content, voltage, flow rate, spinning distance, and rotating speed, while the response variable considered was Young’s modulus. The performance of electrospinning process was systematically screened and optimized using response surface methodology. This work truly demonstrated the sequential nature of designed experimentation. Additionally, the application of various designs of experiment techniques and concepts was also demonstrated. Results revealed that electrospun nanofibrous mats with maximum Young’s modulus (273.51 MPa) was obtained at optimum input settings: 9 v/v% nanoparticle content, 35 kV voltage, 2 mL/h volume flow rate, 8 cm spinning distance, and 3539 r/min of rotating speed. The model was verified successfully by performing confirmation experiments. The nanofibers characterization demonstrated that the nanoparticles were well dispersed inside the nanofibers, and it also showed that the presence of defects on the nanofibers can decrease their mechanical strength. The biocompatibility performance was also evaluated and it was proven that the presence of γ-Fe2O3 enhanced the cell viability and cell growth rate. The developed poly(vinyl alcohol)/γ-Fe2O3 electrospun nanofiber mat has a good potential for tissue engineering scaffolds.

Development of highly porous biodegradable γ-Fe2O3/polyvinyl alcohol nanofiber mats using electrospinning process for biomedical application

The use of electrospinning process in fabricating tissue engineering scaffolds has received great attention in recent years due to its simplicity. The nanofibers produced via electrospinning possessed morphological characteristics similar to extracellular matrix of most tissue components. Porosity plays a vital role in developing tissue engineering scaffolds because it influences the biocompatibility performance of the scaffolds. In this study, maghemite (γ-Fe₂O₃) was mixed with polyvinyl alcohol (PVA) and subsequently electrospun to produce nanofibers. Five factors; nanoparticles content, voltage, flow rate, spinning distance, and rotating speed were varied to produce the electrospun nanofibrous mats with high porosity value. Empirical model was developed using response surface methodology to analyze the effect of these factors to the porosity. The results revealed that the optimum porosity (90.85%) was obtained using 5% w/v nanoparticle content, 35kV of voltage, 1.1ml/h volume flow rate of solution, 8cm spinning distance and 2455rpm of rotating speed. The empirical model was verified successfully by performing confirmation experiments. The properties of optimum PVA/γ-Fe₂O₃ nanofiber mats such as fiber diameter, mechanical properties, and contact angle were investigated. In addition, cytocompatibility test, in vitro degradation rate, and MTT assay were also performed. Results revealed that high porosity biodegradable γ-Fe₂O₃/polyvinyl alcohol nanofiber mats have low mechanical properties but good degradation rates and cytocompatibility properties. Thus, they are suitable for low load bearing biomedical application or soft tissue engineering scaffold.

Mechanical properties and biocompatibility of co-axially electrospun polyvinyl alcohol/maghemite

Electrospinning is a simple and efficient process in producing nanofibers. To fabricate nanofibers made of a blend of two constituent materials, co-axial electrospinning method is an option. In this method, the constituent materials contained in separate barrels are simultaneously injected using two syringe nozzles arranged co-axially and the materials mix during the spraying process forming core and shell of the nanofibers. In this study, co-axial electrospinning method is used to fabricate nanofibers made of polyvinyl alcohol and maghemite (γ-Fe2O3). The concentration of polyvinyl alcohol and amount of maghemite nanoparticle loading were varied, at 5 and 10 w/v% and at 1–10 v/v%, respectively. The mechanical properties (strength and Young’s modulus), porosity, and biocompatibility properties (contact angle and cell viability) of the electrospun mats were evaluated, with the same mats fabricated by regular single-nozzle electrospinning method as the control. The co-axial electrospinning method is able to fabricate the expected polyvinyl alcohol/maghemite nanofiber mats. It was noticed that the polyvinyl alcohol/maghemite electrospun mats have lower mechanical properties (i.e. strength and stiffness) and porosity, more hydrophilicity (i.e. lower contact angle), and similar cell viability compared to the mats fabricated by single-nozzle electrospinning method.

Proliferation and adhesion capability of human gingival fibroblasts onto zirconia, lithium disilicate and feldspathic veneering ceramic in vitro

Human gingival fibroblasts (HGFs) were cultured onto CAD/CAM zirconia (Group A), CAD/CAM zirconia after polishing (Group B), CAD/CAM lithium disilicate after polishing (Group C), and feldspathic ceramic (Group D) to evaluate their proliferation and adhesion potential. After 3 h, HGF adhesion was similar in all groups. Later, HGFs closely adhered to surfaces, particularly onto groups B, C and D, acquiring an elongated shape. Proliferation assay showed no differences in cell viability among the groups after 24 h, while significant increase was shown after 72 h in Groups B and C. After 24 h, similar Collagen I levels were found in all groups, while after 72 h Groups B and C revealed a deep reduction in respect to the 24 h level. In vitro, HGF behavior may reflect variability in soft tissue response to different surface materials for prosthetic restorations, and support that polished zirconia is able to achieve a better integration in vivo in respect to the other materials.

Effects of barriers on chemical and biological properties of two dual resin cements

The aim of this study was to investigate the degree of conversion, monomer release, and cytotoxicity of two dual-cure resin cements (Cement-One and SmartCem2), light-cured across two indirect restorative materials in an attempt to simulate in vitro the clinical conditions. The results obtained show that the degree of conversion was influenced by both barriers, but the effect of the composite material was greater than that of the ceramic one. The amount of monomers released from the polymerized materials in the absence of barriers was significantly lower than that released in the presence of either the ceramic or the composite barrier. However, a higher amount of monomers was released in the presence of the ceramic barrier. All materials, in all the experimental conditions employed, induced slight cytotoxicity (5-10%) on human pulp cells. Our examinations showed that the two resin cements had similar chemical and biological properties. The decreased degree of conversion of the dual-curing self-adhesive composite showed that the light-curing component of these materials has an important role in the polymerization process. In clinical practice, it is therefore important to pay attention to the thickness of the material used for the reconstruction.

Residual HEMA and TEGDMA release and cytotoxicity evaluation of resin-modified glass ionomer cement and compomers cured with different light sources

The purpose of this study was first to evaluate the elution of 2-hydroxyethyl methacrylate (HEMA) and triethylene glycol dimethacrylate (TEGDMA) monomers from resin-modified glass ionomer cement (RMGIC) and compomers cured with halogen and light-emitting diode (LED) light-curing units (LCUs). The effect of cured materials on the viability of L929 fibroblast cells was also evaluated. One RMGIC (Ketac N100) and two compomers (Dyract Extra and Twinkystar) were tested. Materials were prepared in teflon disks and light-cured with LED or halogen LCUs. The residual monomers of resin materials in solution were identified using high-performance liquid chromatography. The fibroblast cells' viability was analyzed using MTT assay. The type of LCU did not have a significant effect on the elution of HEMA and TEGDMA. A greater amount of HEMA than TEGMDA was eluted. The amount of TEGDMA eluted from Twinkystar was greater than Dyract Extra (P < 0.05) when cured with a halogen LCU. All material-LCU combinations decreased the fibroblast cells' viability more than the control group (P < 0.01), except for Dyract Extra cured with a halogen LCU (P > 0.05). Curing with the LED LCU decreased the cells' viability more than curing with the halogen LCU for compomers. For Ketac N100, the halogen LCU decreased the cells' viability more than the LED LCU.

Structural and functional studies on a proline-rich peptide isolated from swine saliva endowed with antifungal activity towards Cryptococcus neoformans

A proline-rich peptide of 2733Da, isolated from pig parotid granule preparations was tested against different pathogenic fungi. It showed interesting antifungal activity towards a clinical isolate of Cryptococcus neoformans, with an EC(50) of 2.2μM. Neither cytotoxic nor haemolytic effects were observed towards mammalian cells. Circular dichroism and infrared spectroscopic studies showed that the peptide adopted a combination of polyproline type-II, β-turn and unordered conformations at physiological temperatures. Temperature dependent experiments evidenced a tendency to adopt a polyproline-II helix conformation. From experiments with lipid vesicles, Neutral Red Uptake (NRU), haemolytic assays, and confocal microscopy studies, it could be hypothesized that the peptide may exert its antifungal effect by interacting with an intracellular target rather than through membrane damage.

Effect of preeclampsia serum on human uterine spiral artery smooth muscle cell apoptosis in a coculture model with cytotrophoblasts

BACKGROUND/AIMS

To investigate cytotrophoblast (CTB) invasive ability and human uterine spiral artery smooth muscle cell (HUSASMC) apoptosis in a coculture model with serum from preeclamptic pregnancies.

METHODS

Transwell migration assay was used to detect the invasive ability of CTBs. Cocultured CTBs and HUSASMCs were incubated with normal or preeclamptic serum for 24 h. Monocultures of CTBs and HUSASMCs were treated identically to the cocultures and served as controls. HUSASMC viability and apoptosis rates were determined by MTT and annexin V-FITC assays. The expressions of Fas ligand (FasL) mRNA in CTBs and Fas mRNA in HUSASMCs were detected by RT-PCR. The expression of the Fas protein in HUSASMCs was detected by Western blotting.

RESULTS

In a model of CTBs cocultured with HUSASMCs, preeclamptic serum effectively decreased the invasive ability and FasL mRNA expression of the CTBs. Preeclampsia serum also increased HUSASMC viability, decreased their apoptotic rate, and decreased the expression of Fas mRNA and protein.

CONCLUSION

The abnormal invasive ability of CTBs and decreased expression of the Fas/FasL system may be directly involved in the defective remodeling of the uterine spiral arteries during preeclampsia. Furthermore, the decrease in HUSASMC apoptosis may be related to the abnormal expression of Fas/FasL.

Preparation, physical-chemical characterization, and cytocompatibility of polymeric calcium phosphate cements

Aim. Physicochemical mechanical and in vitro biological properties of novel formulations of polymeric calcium phosphate cements (CPCs) were investigated. Methods. Monocalcium phosphate, calcium oxide, and synthetic hydroxyapatite were combined with either modified polyacrylic acid, light activated polyalkenoic acid, or polymethyl vinyl ether maleic acid to obtain Types I, II, and III CPCs. Setting time, compressive and diametral strength of CPCs was compared with zinc polycarboxylate cement (control). Specimens were characterized using X-ray diffraction, scanning electron microscopy, and infrared spectroscopy. In vitro cytotoxicity of CPCs and control was assessed. Results. X-ray diffraction analysis showed hydroxyapatite, monetite, and brushite. Acid-base reaction was confirmed by the appearance of stretching peaks in IR spectra of set cements. SEM revealed rod-like crystals and platy crystals. Setting time of cements was 5–12 min. Type III showed significantly higher strength values compared to control. Type III yielded high biocompatibility. Conclusions. Type III CPCs show promise for dental applications.

Magnetic biodegradable Fe3O4/CS/PVA nanofibrous membranes for bone regeneration

In recent years, interest in magnetic biomimetic scaffolds for tissue engineering has increased considerably. The aim of this study is to develop magnetic biodegradable fibrous materials with potential use in bone regeneration. Magnetic biodegradable Fe(3)O(4)/chitosan (CS)/poly vinyl alcohol (PVA) nanofibrous membranes were achieved by electrospinning with average fiber diameters ranging from 230 to 380 nm and porosity of 83.9-85.1%. The influences of polymer concentration, applied voltage and Fe(3)O(4) nanoparticles loading on the fabrication of nanofibers were investigated. The polymer concentration of 4.5 wt%, applied voltage of 20 kV and Fe(3)O(4) nanoparticles loading of lower than 5 wt% could produce homogeneous, smooth and continuous Fe(3)O(4)/CS/PVA nanofibrous membranes. X-ray diffraction (XRD) data confirmed that the crystalline structure of the Fe(3)O(4), CS and PVA were maintained during electrospinning process. Fourier transform infrared spectroscopy (FT-IR) demonstrated that the Fe(3)O(4) loading up to 5 wt% did not change the functional groups of CS/PVA greatly. Transmission electron microscopy (TEM) showed islets of Fe(3)O(4) nanoparticles evenly distributed in the fibers. Weak ferrimagnetic behaviors of membranes were revealed by vibrating sample magnetometer (VSM) test. Tensile test exhibited Young's modulus of membranes that were gradually enhanced with the increase of Fe(3)O(4) nanoparticles loading, while ultimate tensile stress and ultimate strain were slightly reduced by Fe(3)O(4) nanoparticles loading of 5%. Additionally, MG63 human osteoblast-like cells were seeded on the magnetic nanofibrous membranes to evaluate their bone biocompatibility. Cell growth dynamics according to MTT assay and scanning electron microscopy (SEM) observation exhibited good cell adhesion and proliferation, suggesting that this magnetic biodegradable Fe(3)O(4)/CS/PVA nanofibrous membranes can be one of promising biomaterials for facilitation of osteogenesis.

Response of Bone and Periodontal Ligament Cells to Biodegradable Polymer Scaffolds In Vitro

In this in vitro study, the initial response of human periodontal ligament (PDL) cells and alveolar osteoblast-like cells (HOB) to three biodegradable polymers with varying pore size and different mechanical properties were evaluated. Scaffolds were synthesized from poly(L-lactide), [poly(LLA)], poly(L-lactide-co-1,5-dioxepan-2-one), [poly(LLA-co-DXO)], poly(L-lactide-co-ε-caprolactone), and [poly(LLA-co-CL)] with pore sizes greater or less than 90 µm by salt leaching. Cells were obtained from patients undergoing routine oral surgery. After 2—4 passages, the cells were grown on scaffolds and in culture plates (control) for 3 h (PDL cells), 3 days (PDL cells and HOB), 10 and 14 days (HOB), respectively. The cellular morphology and spreading were determined by scanning electron microscopy (SEM) and the attachment and proliferation were evaluated by MTT assays. The SEM images revealed heterogeneous cellular morphology and good spreading. Cellular attachment and proliferation were significantly higher on poly(LLA-co-DXO) and poly(LLA-co-CL) than on poly(LLA) scaffolds (p = 0.003) and highest for poly(LLA-co-DXO). Expression of bone formation markers, collagen-I (COL-I), transforming growth factor-β 1 (TGF-β1), and osteocalcin (OCN), was determined by ELISA. The expression of COL-1 was similar for HOB and PDL cells, but significantly higher for pore size >90 µm while the HOB expression of TGFβ 1 and OCN was greater on poly(LLA-co-CL) and poly(LLA-co-DXO) than on poly(LLA) scaffolds.

Polymeric-calcium phosphate cement composites-material properties: in vitro and in vivo investigations

New polymeric calcium phosphate cement composites (CPCs) were developed. Cement powder consisting of 60 wt% tetracalcium phosphate, 30 wt% dicalcium phosphate dihydrate, and 10 wt% tricalcium phosphate was combined with either 35% w/w poly methyl vinyl ether maleic acid or polyacrylic acid to obtain CPC-1 and CPC-2. The setting time and compressive and diametral tensile strength of the CPCs were evaluated and compared with that of a commercial hydroxyapatite cement. In vitro cytotoxicity and in vivo biocompatibility of the two CPCs and hydroxyapatite cement were assessed. The setting time of the cements was 5-15 min. CPC-1 and CPC-2 showed significantly higher compressive and diametral strength values compared to hydroxyapatite cement. CPC-1 and CPC-2 were equivalent to Teflon controls after 1 week. CPC-1, CPC-2, and hydroxyapatite cement elicited a moderate to intense inflammatory reaction at 7 days which decreased over time. CPC-1 and CPC-2 show promise for orthopedic applications.

Inflammatory suppression by endodontic sealers after aging 12 weeks In vitro

Dental endodontic sealers are in intimate contact with tissues around the root apex (periapical area) for extended periods. New endodontic sealers have been developed in the past decade, but the biological responses to many new products are not well documented. In this study, we assessed in vitro monocytic cytotoxic and inflammatory responses to several contemporary endodontic sealers. AH-Plus (AH), Pulp Canal Sealer (PC), Epiphany (EPH), Endo-Rez (ER), and an experimental Endo-Rez (ERx) were initially placed in buffered-saline for 12 weeks to simulate in vivo use. After "aging," specimens were placed in direct contact with THP1 monocytes for 72 h and their cytotoxicity (mitochondrial response; MTT) or ability to trigger or suppress cytokine secretion (ELISA; TNFalpha, IL1beta, IL=6; +/- lipopolysaccharide (LPS) exposure) were measured relative to Teflon (Tf) negative controls. Cellular responses among conditions were compared with ANOVA and Tukey post-hoc analysis (alpha = 0.05). Two of the five sealers, EPH and PC, still suppressed cell mitochondrial activity by 70% or more after 12 weeks of conditioning in saline. No sealer alone activated monocytic TNFalpha, IL1beta, or IL6 secretion (p > 0.05 vs. +LPS controls). When THP1 were activated by LPS after exposure to the sealers, differential suppression of TNFalpha, IL1beta, and IL6 secretion was observed for two of the five sealers tested. (EPH and PC) This data suggest that common endodontic sealers do not activate monocytic TNFalpha, IL1beta, and IL6 secretion in vitro by themselves, but degradation products of the sealers may suppress activation of monocytes.

In vitro evaluation of cytotoxicity of soft lining materials on L929 cells by MTT assay

The aim of this in vitro study was to evaluate five commonly used soft lining materials, Viscogel (VG), Ufi Gel P (UGP), Softliner (S), Coe-Soft (CS), and Molloplast-B (MB) in terms of cytotoxicity by MTT assay, using L929 mouse fibroblasts. Sixteen disk-shaped specimens from each material were prepared (according to the manufacturer's instructions) in stainless steel mold (10 mm diameter and 1.5 mm thick). The specimens were incubated for 24, 48, 72, and 96 h in Dulbecco's Modified Eagle Medium Ham's F12 (DMEM/F12) and following each incubation interval, cytotoxicity of the extracts to cultured mouse fibroblasts (L929) were measured by MTT assay. Data were statistically analyzed by two-way analysis of variance (ANOVA), and Duncan's test, at a significance level of p < 0.05. Group CS revealed significantly high cytotoxic effect at all incubation periods (p < 0.05). Although no cytotoxic effect for Group S was found at 24, 48, 72 h periods, it has been raised at 96-h incubation period (p > 0.05). Group VG, UGP, S (except at 96 h period), and Group MB demonstrated high cell survival rates at incubation periods.

Cytotoxic Evaluation of Elastomeric Dental Impression Materials on a Permanent Mouse Cell Line and on a Primary Human Gingival Fibroblast Culture

The need for clinically relevant in vitro tests of dental materials is widely recognized. Nearly all dental impression materials are introduced into the mouth just after mixing and allowed to set in contact with the oral tissues. Under these conditions, the materials may be toxic to cells or may sensitize the tissues. The aim of the present study is to evaluate the potential cytotoxicity of new preparations of elastomeric dental impression materials: A) four vinylpolysiloxanes: Elite H-D Putty and Elite H-D Light Body (Zhermack, Badia Polesine, Rovigo, Italy); Express Putty and Express Light Body (3M ESPE AG Seefeld, Germany) and B) two polyethers: Impregum Penta and Permadyne Penta L (3M ESPE AG Seefeld, Germany). The cytotoxicity of these impression materials were examined using two different cell lines: Balb/c 3T3 (permanent cell line) and human gingival fibroblasts (primary cell line) and their effects were studied by indirect and direct tests. The direct tests are performed by placing one sample of the impression materials in the centre of the Petri dishes at the time of the seeding of cells. The cell growth was evaluated at the 12th and 24th hours by cell number. The indirect tests were performed by incubating a square of 1 cm diameter impression material in 5 mL of medium at 37 °C for 24 hours (“eluates”). Subconfluent cultures are incubated with “eluates” for 24 hours. The MTT-formazan production is the method used for measuring the cell viability. The results indicate that: a) polyether materials are cytotoxic under both experimental conditions; b) among vinylpolysiloxanes, only Express Light Body (3M ESPE AG Seefeld, Germany) induces clear inhibition of cellular viability of Balb/c 3T3 evaluated by direct and indirect tests and c) the primary cell line is less sensitive to the toxic effect than the permanent cell line.

In vitro cytotoxic response to lithium disilicate dental ceramics

OBJECTIVES

The use of lithium disilicate dental ceramics is increasing in dentistry and previous reports have suggested that they may have greater biological risks than previously thought. We tested a hypothesis that composition and processing influence the biological properties of these ceramics.

METHODS

The cytotoxicity of two machined and three pressed lithium disilicate materials (n=6) were tested in vitro using mouse fibroblasts in direct contact with the materials for 72h. Cellular response was estimated by mitochondrial succinate dehydrogenase activity (MTT method). Mitochondrial activity was expressed as a percentage of Teflon controls, then compared to Teflon using 2-sided t-tests (alpha=0.05). Polished materials were aged in artificial saliva and tested for cytotoxicity periodically over 6 weeks, then were repolished (320grit SiC paper), aged and tested again for 4 weeks.

RESULTS

All materials significantly (50-70%) suppressed cellular mitochondrial activity in the initial week, but suppression decreased by 25-30% over the next 2 weeks. In weeks 4 and 6 some materials exhibited a cytotoxic 'relapse' of 10-20%. The cytotoxic response was no different for machined or pressed materials, but the presence of ZnO had at least an association with longer-term cytotoxicity and relapse. Repolishing to 320grit did not increase cytotoxicity significantly.

SIGNIFICANCE

Our results suggest that lithium disilicates are not biologically inert, and that many have a similar cytotoxicity dynamic regardless of small differences in composition or processing.

Structural and functional characterization of the porcine proline–rich antifungal peptide SP-B isolated from salivary gland granules

A 1905-Da cationic proline-rich peptide, named SP-B, was recently isolated by our group as the main component of salivary gland granules, and its primary sequence fully characterized by means of automated Edman sequencing and LC-MS/MS tools. In the present study SP-B is shown to possess antifungal activity when challenged with strains of Cryptococcus neoformans, Candida albicans and Aspergillus fumigatus, while only negligible antibacterial activity was detected. Furthermore, SP-B was found to be non-cytotoxic when tested on fibroblast cell lines. To obtain information regarding its structure affinity, capillary electrophoresis (CE), circular dichroism (CD) and attenuated total reflection (ATR)-FT/IR experiments were performed. CE revealed a pH dependence of the hydrodynamic radial dimensions both in aqueous and 2,2,2-trifluoroethanol solutions. CD and ATR-FT/IR measurements confirmed the structure-pH relationship, revealing a secondary structure composed of mixed proportions of polyproline-II, unordered and turn motifs, the last being more evident in the zwitterionic form of the peptide. From these findings SP-B peptide could be classified as a new member of the proline-rich antimicrobial peptide family.

Relationship between radial diffusion of copper ions released from a metal disk and cytotoxic effects. Comparison with results obtained using extracts

The extended use of metallic biomaterials yields to increasing sources of metal ions within the human body and may result in inflammation of the surrounding tissues, cell damage, and cancer. The aim of this study was to investigate the relationship between the radial diffusion of metal ions released from a metal disk by the corrosion process and the toxic effect on a cell line that grew around it. Results obtained with the metal disks (direct contact) were compared with assays made with extracts obtained from the dissolution of a metallic sample ex situ and then added to the cell culture to elucidate the cause of apparent inconsistencies in previous reports. The change of copper concentration due to corrosion and transient diffusion of copper ions from the copper disks into the cell line was evaluated according to Fick's 2nd law. Surviving cells distribution was interpreted considering the radial and time-dependence of copper concentration. We concluded that the toxic effect on those cells close to metallic biomaterials may be underestimated when only the extract methodology is employed for cytotoxic tests or when during the experiments with disks the presence of concentration gradients and the non-homogeneous distribution of dead cells are disregarded.

Improved biological characteristics of poly(L-lactic acid) electrospun membrane by incorporation of multiwalled carbon nanotubes/hydroxyapatite nanoparticles

Significant effort has been devoted to fabricating various biomaterials to satisfy specific clinical requirements. In this study, we developed a new type of guided tissue regeneration (GTR) membrane by electrospinning a suspension consisting of poly( l-lactic acid), multiwalled carbon nanotubes, and hydroxyapatite (PLLA/MWNTs/HA). MWNTs/HA nanoparticles were uniformly dispersed in the membranes, and the degradation characteristics were far improved. Cytologic research revealed that the PLLA/MWNTs/HA membrane enhanced the adhesion and proliferation of periodontal ligament cells (PDLCs) by 30% and inhibited the adhesion and proliferation of gingival epithelial cells by 30% also, compared with the control group. After PDLCs were seeded into the PLLA/MWNTs/HA membrane, cell/membrane composites were implanted into the leg muscle pouches of immunodeficient mice. Histologic examinations showed that PDLCs attached on the membranes functioned well in vivo. This new type of membrane shows excellent dual biological functions and satisfied the requirement of the GTR technique successfully in spite of a monolayer structure. Compared with other GTR membranes on sale or in research, the membrane can simplify the manufacturing process, reduce the fabrication cost, and avoid possible mistakes in clinical application. Moreover, it does not need to be taken out after surgery. PLLA/MWNTs/HA membranes have shown great potential for GTR and tissue engineering.

Poly-L-lactic acid/hydroxyapatite hybrid membrane for bone tissue regeneration

Poly-L-lactic acid (PLLA)/hydroxyapatite (HA) hybrid membranes were fabricated via electrospinning of the PLLA/HA dispersion for use in bone tissue regeneration. The structural properties and morphologies of PLLA and PLLA/HA hybrid membrane were investigated by measuring the Brunauer-Emmett-Teller specific surface area, observations of SEM, and TEM. The dispersion and integrating of HA nanoparticles in the hybrid membrane were studied by energy dispersion X-ray analysis and FTIR. The mechanical properties of PLLA/HA membrane were also measured by tensile tests. For exploring biological behaviors of the hybrid membrane, in vitro degradation tests were carried out. The osteoblast cell (MG-63) was cultured in PLLA/HA hybrid membrane extract containing medium; the cell adhesion and growth capability were investigated by SEM observation and MTT assay. HA nanoparticles were not only dispersed in the PLLA but also reacted with the functional group of PLLA, resulting in strong surface bonding and high tensile strength of hybrid membrane. The cell adhesion and growth on the PLLA/HA hybrid membrane were far better than those on the pure PLLA membrane, which proves that the PLLA/HA hybrid membrane can be one of the promising biomaterials for bone tissue regeneration.

In vitro cytotoxicity of dental composites based on new and traditional polymerization chemistries

The biological response to dental restorative polymer composites is mediated by the release of unpolymerized residual monomers. Several new composite formulations claim to reduce unpolymerized residual mass. The current study assessed the cytotoxic responses to several of these new formations and compared them with more traditional formulations. Our hypothesis predicted that if these new polymerization chemistries reduce unpolymerized residual mass, the cytotoxicity of these materials also should be reduced relative to traditional formulations.

METHODS

Materials (HerculiteXRV, Premise, Filtek Supreme, CeramxDuo, Hermes, and Quixfil) were tested in vitro in direct contact with Balb mouse fibroblasts, initially, then after aging in artificial saliva for 0, 1, 3, 5, or 8 weeks. The toxicity was determined by using the MTT assay to the estimate SDH activity. Knoop hardness of the materials also was measured at 0 and 8 weeks to determine whether surface breakdown of the materials in artificial saliva contributed to cytotoxic responses.

RESULTS

Materials with traditional methacrylate chemistries (Herculite, Premise, Filtek Supreme) were severely (>50%) cytotoxic throughout the 8-week interval, but materials with newer chemistries or filling strategies (Hermes, CeramXDuo, and Quixfil) improved over time of aging in artificial saliva. Hermes showed the least cytotoxicity at 8 weeks, and was statistically equivalent to Teflon negative controls. Hardness of the materials was unaffected by exposure to artificial saliva.

CONCLUSIONS

Newer polymerization and filling strategies for dental composites show promise for reducing the release of unpolymerized components and cytotoxicity.

Cytotoxicity of Orthodontic Wire Corroded in Fluoride Solution In Vitro

OBJECTIVE

To investigate the toxicity of fluoride corrosion extracts of stainless steel (SS) and nickel-titanium (NiTi) wires on a human osteosarcoma cell line (U2OS).

MATERIALS AND METHODS

The SS and NiTi wires were corroded by an electrochemical method with the application of three kinds of electrolytes: 0.2% pH 3.5 acidulated phosphate fluoride (NaF) in artificial saliva, and pH 4 and pH 6.75 artificial saliva solutions. The extracts were analyzed for nickel, chromium, and titanium ions by the atomic absorption method. The extracts were diluted with medium to different concentrations (1, 0.1, and 0.01 microL/mL). The cell survival rate was determined by the ability of test cells to cleave the tetrazolium salt to form a formazan dye.

RESULTS

The results were compared using one-way analysis of variance. Differences between the treatment means were analyzed using a Student-Newman-Keuls (SNK) test and were considered significant at P < .05. The release of ionic nickel was different in different extract groups (P < .05). The SS and NiTi wires in the 0.2% pH 3.5 NaF artificial saliva group caused a dose-dependent decrease in the survival rate (P < .05). Survival rates of cells in the groups exposed to extracts of SS and NiTi wires in pH 4 and pH 6.75 artificial saliva solutions showed no statistical differences (P >.05).

CONCLUSIONS

Orthodontic wires in acidulated fluoride saliva solution can cause U2OS cell toxicity.

Initial cytotoxicity of novel titanium alloys

We assessed the biological response to several novel titanium alloys that have promising physical properties for biomedical applications. Four commercial titanium alloys [Super-TIX(R) 800, Super-TIX(R) 51AF, TIMETAL(R) 21SRx, and Ti-6Al-4V (ASTM grade 5)] and three experimental titanium alloys [Ti-13Cr-3Cu, Ti-1.5Si and Ti-1.5Si-5Cu] were tested. Specimens (n = 6; 5.0 x 5.0 x 3.0 mm(3)) were cast in a centrifugal casting machine using a MgO-based investment and polished to 600 grit, removing 250 mum from each surface. Commercially pure titanium (CP Ti: ASTM grade 2) and Teflon (polytetrafluoroethylene) were used as positive controls. The specimens were cleaned and disinfected, and then each cleaned specimen was placed in direct contact with Balb/c 3T3 fibroblasts for 72 h. The cytotoxicity [succinic dehydrogenase (SDH) activity] of the extracts was assessed using the MTT method. Cytotoxicity of the metals tested was not statistically different compared to the CP Ti and Teflon controls (p > 0.05). These novel titanium alloys pose cytotoxic risks no greater than many other commonly used alloys, including commercially pure titanium. The promising short-term biocompatibility of these Ti alloys is probably due to their excellent corrosion resistance under static conditions, even in biological environments.

In vitro biological response to a light-cured composite when used for cementation of composite inlays

OBJECTIVE

To define the cytotoxicity of a photo-cured composite when used as a bonding system under a composite inlay.

METHODS

Composite specimens were photo-cured with or without a 2 mm composite inlay interposed between them and the light source. Samples were extracted in complete cell culture medium and the obtained eluates applied to primary cultures of human pulp and gingival fibroblasts. After 72 h of incubation, cell viability was evaluated by MTT assay. Survival rates were calculated with respect to negative controls.

RESULTS

Both shielded and unshielded composite samples were cytotoxic to pulp and gingival cells. The inlay shielded composite samples reached a significantly higher level of cytotoxicity compared to the unshielded ones.

SIGNIFICANCE

The results suggested that the cytotoxicity of a light-cured composite resin used as a bonding system for indirect composite restorations may be significantly increased as a result of an inlay light-shielding effect.

Initial In Vitro Biological Response to Contemporary Endodontic Sealers

The objective of this study was to evaluate the cytotoxicity of three endodontic sealers (AH Plus/Maillefer-Dentsply, Epiphany/Pentron, GuttaFlow, Coltene-Whaledent). Materials were mixed according to the manufacturer instructions and packed into Teflon molds (10 x 1 mm). For cytotoxicity testing (MTT method), the specimens were placed in contact with cultured cells, then evaluated at two subsequent time points (24 or 72 h). In addition to testing the mixed materials, 5 microl of primer liquid (GuttaFlow and Epiphany) and resin solvents (HEMA, ethanol, sterile water, or acetone) were added directly in culture for 24 and 72 h. The results showed that most materials pose significant cytotoxic risks and that cytotoxicity generally increased with time. At 72 h, GuttaFlow became significantly less toxic than AH Plus, Epiphany sealer, and Resilon. The current results support the need to continue to develop better endodontic sealers that combine the excellent sealing and bonding properties of resins with acceptable biological properties for endodontic applications.

The effect of two fibre impregnation methods on the cytotoxicity of a glass and carbon fibre-reinforced acrylic resin denture base material on oral epithelial cells and fibroblasts

Acrylic resin dentures may have cytotoxic effects on oral soft tissues. However, there is sparse data about the cytotoxic effect of fibre-reinforced acrylic resin denture base materials. The purpose of this in vitro study was to determine the effect of two fibre impregnation methods on the cytotoxicity of a glass and carbon fibre-reinforced heat-polymerized acrylic resin denture base material on oral epithelial cells and fibroblasts. One hundred acrylic resin discs were assigned to five experimental groups (n = 20). One of the groups did not include any fibre. Two groups consisted of silane and monomer treated glass fibres (Vetrolex) impregnated into acrylic resin (QC-20) discs. The other two groups consisted of silane and monomer treated carbon fibres (Type Tenox J, HTA). Untreated cell culture was used as positive control. The human oral epithelial cell line and buccal fibroblast cultures were exposed to test specimens. The cytotoxicity of the test materials was determined by succinic dehydrogenase activity (MTT method) after 24 and 72 h exposures. Data were analysed with a statistical software program (SPSSFW, 9.0). A one-way analysis of variance (anova) test and Bonferroni test were used for the comparisons between the groups. All statistical tests were performed at the 0.95 confidence level (P < 0.05). After 24 and 72 h incubation, cell viability percentages of all experimental groups showed significant decrease according to the positive control cell culture. Fibroblastic cell viability percentages of silane and monomer treated fibre-reinforced groups were lower than the unreinforced group. Cell viability of monomer-treated groups displayed the lowest percentages. Elapsed incubation time decreased epithelial cell viability in silane-treated groups. Fibroblastic cell viability was not influenced by elapsed time except the unreinforced group.

Sublethal concentrations of diverse gold compounds inhibit mammalian cytosolic thioredoxin reductase (TrxR1)

Thioredoxin reductase (TrxR) reduces thioredoxin (Trx), thereby contributing to cellular redox balance, facilitating the synthesis of deoxy-ribose sugars for DNA synthesis, and regulating redox-sensitive gene expression. Auranofin is a gold compound that potently inhibits TrxR. This inhibition is one suspected mechanism of auranofin's therapeutic benefit in the treatment of rheumatoid arthritis. The use of other gold compounds to treat cancer or inflammatory disease may rely on their ability to inhibit TrxR. In the current study, we tested the hypothesis that a variety of gold compounds may inhibit TrxR.

METHODS

We exposed rat-TrxR1 to auranofin, gold sodium thiomalate, sodium aurothiosulfate, triphenyl phosphine gold chloride, or gold acetate, and measured TrxR activity ex vivo. We then compared TrxR1 inhibitory levels of gold compounds to those that inhibited mitochondrial activity of THP1 monocytes and OSC2 epithelial cells, estimated by succinate dehydrogenase activity.

RESULTS

All gold compounds inhibited TrxR1 at concentrations ranging from 5 to 4000 nM (50% inhibitory concentration). The oxidation state of gold did not correlate with inhibitory potency, but ligand configuration was important. Au(I)-phosphine compounds (triphenyl phosphine gold chloride and auranofin) were the most potent inhibitors of TrxR. All TrxR1 inhibitory concentrations were sublethal to mitochondrial activity in both THP1 and OSC2 cells.

CONCLUSIONS

Diverse types of gold compounds may be effective inhibitors of TrxR1 at concentrations that do not suppress cellular mitochondrial function. Inhibition may be optimized to some degree by altering the ligand configuration of the compounds. These results support future study of a variety of Au compounds for therapeutic development as inhibitors of TrxR1.

Cytotoxicity and sealing properties of four classes of endodontic sealers evaluated by succinic dehydrogenase activity and confocal laser scanning microscopy

The objectives of this study were to evaluate the cytotoxicity and sealing properties of four classes of endodontic sealers (PCS/Kerr, RoekoSeal/Roeko, TopSeal/Dentsply, and EndoREZ/Ultradent). For cytotoxicity testing (MTT method), the materials were either placed immediately in contact with cultured cells or 24 h after setting, then evaluated at three subsequent time points (24 h, 48 h, or 1 wk). For the leakage study, extracted human roots were obturated with acrylic cones and sealers and immersed for 48 h into rhodamine-labeled lipopolysaccharide. The roots were then observed under a confocal laser scanning microscope to estimate (semiquantitatively) the presence of the rhodamine-lipopolysaccharide (LPS) inside the canal. The results showed that cytotoxicity generally increased with time, and that most materials pose significant cytotoxic risks, particularly in the freshly mixed condition. Further, all materials showed significant leakage although there was large variation among teeth. Overall, the silicon-based material (Roeko Seal) was less cytotoxic and more effective in sealing root canals against LPS leakage than other materials.

Biocompatibility of human osteosarcoma cells to root end filling materials

Ideal root end filling materials should have good physical and chemical properties, and the most important is that the material should be biocompatible with periradicular tissue. The biocompatibility of three root end filling materials, mineral trioxide aggregate, calcium hydroxide-based cement, and eugenol-based cement, were investigated in vitro by culturing extracts of these materials with human osteogenic sarcoma cells (U2OS). Extracts of each of the materials were made after incubation of the materials for 1 day and 1 week with complete McCoy's medium. The extracts were serially diluted and then incubated with U2OS cells for 24 and 48 h. Cell survival rates were assessed by means of a viability assay for mitochondrial dehydrogenase activity. Differences in mean cell survival rates were statistically assessed using one-way ANOVA. Results showed that the survival rates of U2OS cells were largest with mineral trioxide aggregate, followed by calcium hydroxide-based cement and eugenol-based cement at 24- and 48-h exposures using the 1-day and 1-week extracts. The duration of root end filling material extraction time and treatment time showed variable influence on the survival rates. The results suggest that mineral trioxide aggregate is more biocompatible than the other root end filling materials and is suitable for use in the clinical setting.

In vitro cytotoxicity of traditional versus contemporary dental ceramics

STATEMENT OF PROBLEM

The biocompatibility of new dental ceramics has not been assessed with the same scrutiny as has been applied to alloys and composites. Yet, the biocompatibility of ceramics is critical to the long-term success of dental prostheses because ceramics are in close contact with oral tissues for extended periods.

MATERIAL AND METHODS

Five dental ceramics (2 traditional feldspathic veneer porcelains [Vita Omega and Duceragold], 2 lithium disilicate pressable materials [Stylepress and Empress-2], and a pressable leucite-based material [Empress-1]) were tested for their ability to alter cellular mitochondrial dehydrogenase activity after fabrication using a tetrazolium assay, after aging for 2 weeks in a biologic solution and after post-aging polishing with either a fine diamond or diamond polishing paste. Cellular responses were compared with polytetrafluoroethylene controls (analysis of variance, Tukey pairwise post-hoc comparison, alpha=.05).

RESULTS

The feldspathic porcelains caused only mild (<25% of controls) mitochondrial suppression regardless of aging or polishing. The pressable leucite-based material initially caused a 5% stimulation (not significant) of mitochondrial activity, which decreased significantly (P<.05) by 30% with aging to levels comparable to the feldspathic porcelains, and did not change with polishing. Both lithium disilicate materials caused an initial suppression of mitochondrial activity that decreased significantly with aging, but Empress-2 was severely cytotoxic initially (<20% of controls, P<.01), and became more cytotoxic again after polishing. Stylepress was less cytotoxic initially (85% of controls, not significant) and did not become cytotoxic again after polishing.

CONCLUSIONS

Dental ceramics are not equivalent in their in vitro biologic effects, even within the same class of material, and biologic safety should not be assumed. Most ceramics caused only mild in vitro suppression of cell function to levels that would be acceptable on the basis of standards used to evaluate alloys and composites. However, 1 Li-disilicate material (Empress-2) exhibited cytotoxicity that would not be deemed biologically acceptable on the basis of prevailing empirical standards for dental alloys and composites.

In vitro biological response to core and flowable dental restorative materials

OBJECTIVES

In vitro cytotoxicities of commercially available core and flowable dental restorative materials were assessed and compared to traditional resin composites. Our hypothesis was that the increased resin diluents added to achieve higher flow in flowables would increase cytotoxicities, whereas the higher filler content of core materials would decrease cytotoxicities relative to traditional resin composites.

METHODS

Specimens were made under aseptic conditions, then extracted into an artificial saliva solution for 0-4 weeks, to assess the effect of aging on cytotoxicity. After extraction, specimens were tested for cytotoxicity in vitro using Balb/c fibroblasts in direct contact format. Cells were exposed to the materials for 48h, after which the mitochondrial activity of the cells was measured (MTT method). Cellular activity was normalized to Teflon negative controls.

RESULTS

Core materials were uniformly and severely (<50% of Teflon cellular activity) cytotoxic initially, but several materials (Corepaste, Definite core) improved somewhat with aging in artificial saliva. Flowable materials were uniformly and severely cytotoxic with no trend toward improvement with aging. The Definite-flow was the least cytotoxic of the flowable materials, but it too was severely cytotoxic.

SIGNIFICANCE

Commercially available core and flowable restorative materials showed severe in vitro cytotoxicities that are worse than some traditional composites and most dental casting alloys and amalgams used today. Of particular note was the persistent cytotoxicity of these materials after 4 weeks of extraction with artificial saliva. These cytotoxicities indicate a continuing release of mass from these materials at levels that have biological relevance in vitro. In vivo relevance of these cytotoxicities is less clear, but these results indicate a higher biological risk for these materials compared to traditional materials that exhibit less initial toxicity and improve with aging time.

Components of dentinal adhesives modulate heat shock protein 72 expression in heat-stressed THP-1 human monocytes at sublethal concentrations

Few studies have investigated the ability of dental resins to induce cellular stress at sublethal concentrations. Cellular stress, especially in immune cells such as monocytes, may modulate the biological response to materials or the host's ability to respond to bacterially mediated inflammation. The current study examined the ability of sublethal concentrations of 2-hydroxylethylmethacrylate (HEMA) and triethyleneglycol dimethacrylate (TEGDMA) to induce heat shock protein 72 (HSP72) in human monocytes. HEMA and TEGDMA significantly suppressed heat-induced HSP72 expression, even at sublethal levels, but did not induce HSP72 by themselves. The results of the current study suggest that components released from dental resin could modulate the HSP stress response without altering cellular metabolic activity.