Nucleation of actin polymerization from profilactin. Opposite effects of different nuclei

Nucleation limits the lengths of actin filaments assembled by formin

Formins stimulate actin polymerization by promoting both filament nucleation and elongation. Because nucleation and elongation draw upon a common pool of actin monomers, the rate at which each reaction proceeds influences the other. This interdependent mechanism determines the number of filaments assembled over the course of a polymerization reaction, as well as their equilibrium lengths. In this study, we used kinetic modeling and in vitro polymerization reactions to dissect the contributions of filament nucleation and elongation to the process of formin-mediated actin assembly. We found that the rates of nucleation and elongation evolve over the course of a polymerization reaction. The period over which each process occurs is a key determinant of the total number of filaments that are assembled, as well as their average lengths at equilibrium. Inclusion of formin in polymerization reactions speeds filament nucleation, thus increasing the number and shortening the lengths of filaments that are assembled over the course of the reaction. Modulation of the elongation rate produces modest changes in the equilibrium lengths of formin-bound filaments. However, the dependence of filament length on the elongation rate is limited by the number of filament ends generated via formin's nucleation activity. Sustained elongation of small numbers of formin-bound filaments, therefore, requires inhibition of nucleation via monomer sequestration and a low concentration of activated formin. Our results underscore the mechanistic advantage for keeping formin's nucleation efficiency relatively low in cells, where unregulated actin assembly would produce deleterious effects on cytoskeletal dynamics. Under these conditions, differences in the elongation rates mediated by formin isoforms are most likely to impact the kinetics of actin assembly.

Profilin-A master coordinator of actin and microtubule organization in mammalian cells

The last two decades have witnessed a tremendous increase in cell biology data. Not least is this true for studies of the dynamic organization of the microfilament and microtubule systems in animal cells where analyses of the molecular components and their interaction patterns have deepened our understanding of these complex force-generating machineries. Previous observations of a molecular cross-talk between the two systems have now led to the realization of the existence of several intricate mechanisms operating to maintain their coordinated cellular organization. In this short review, we relate to this development by discussing new results concerning the function of the actin regulator profilin 1 as a control component of microfilament-microtubule cross-talk.

Self-Assembly of Human Profilin-1 Detected by Carr-Purcell-Meiboom-Gill Nuclear Magnetic Resonance (CPMG NMR) Spectroscopy

Protein oligomerization in the cell has important implications for both health and disease, and an understanding of the mechanisms by which proteins can self-associate is, therefore, of critical interest. Initial stages of the oligomerization process can be hard to detect, as they often involve the formation of sparsely populated and transient states that are difficult to characterize by standard biophysical approaches. Using relaxation dispersion nuclear magnetic resonance spectroscopy, we study the oligomerization of human profilin-1, a protein that regulates the polymerization of actin. We show that in solution and at millimolar concentrations profilin-1 is predominantly monomeric. However, fits of concentration-dependent relaxation data are consistent with the formation of a higher-order oligomer that is generated via a multistep process. Together with crystallographic data for profilin-2, a homologue of the protein studied here, our results suggest that profilin-1 forms a sparsely populated tetrameric conformer in solution.

Interaction of profilin with the barbed end of actin filaments

Profilin binds not only to actin monomers but also to the barbed end of the actin filament, where it inhibits association of subunits. To address open questions about the interactions of profilin with barbed ends, we measured the effects of a wide range of concentrations of Homo sapiens profilin 1 on the rate of elongation of individual skeletal muscle actin filaments by total internal reflection fluorescence microscopy. Much higher concentrations of profilin were required to stop elongation by AMP-PNP-actin monomers than ADP-actin monomers. High concentrations of profilin depolymerized barbed ends at a rate much faster than the spontaneous dissociation rates of Mg-ATP-, Mg-AMP-PNP-, Mg-ADP-Pi-, and Mg-ADP-actin subunits. Fitting a thermodynamic model to these data allowed us to determine the affinities of profilin and profilin-actin for barbed ends and the influence of the nucleotide bound to actin on these interactions. Profilin has a much higher affinity for ADP-actin filament barbed ends (Kd = 1 μM) than AMP-PNP-actin filament barbed ends (Kd = 226 μM). ADP-actin monomers associated with profilin bind to ADP-actin filament barbed ends 10% as fast as free ADP-actin monomers, but bound profilin does not affect the rate of association of AMP-PNP-actin monomers with barbed ends. The differences in the affinities of AMP-PNP- and ADP-bound barbed ends for profilin and profilin-actin suggest that conformations of barbed end subunits differ from those of monomers and change upon nucleotide hydrolysis and phosphate release. A structural model revealed minor steric clashes between profilin and actin subunits at the barbed end that explain the biochemical results.

Molecular insights on context-specific role of profilin-1 in cell migration

Profilin-1 (Pfn1) is a ubiquitously expressed actin-monomer binding protein that has been linked to many cellular activities ranging from control of actin polymerization to gene transcription. Traditionally, Pfn1 has been considered to be an essential control element for actin polymerization and cell migration. Seemingly contrasting this view, a few recent studies have shown evidence of an inhibitory action of Pfn1 on motility of certain types of carcinoma cells. In this review, we summarize biochemistry and functional aspects of Pfn1 in normal cells and bring in newly emerged action of Pfn1 in cancer cells that may explain its context-specific role in cell migration.

Evidence for two interaction regions for phosphatidylinositol(4,5)-bisphosphate on mammalian profilin I

The binding of phosphatidylinositol(4,5)-bisphosphate (PI(4,5)P(2)) to profilin at a region distinct from the actin interaction surface is demonstrated by experiments with covalently cross-linked profilin:beta-actin. The result is in agreement with observations made with several mutant profilins and provides strong evidence for two regions on mammalian profilin mediating electrostatic interaction with phosphatidylinositol lipids; one close to the binding site for poly(L-proline), and one partially overlapping with the actin-binding surface. Congruent with this, two plant profilins, which have a reduced number of positive amino acids in one of these regions, displayed a dramatically lower binding to PI(4,5)P(2) compared to human profilin I.

A cross-linked profilin-actin heterodimer interferes with elongation at the fast-growing end of F-actin

Profilin and beta/gamma-actin from calf thymus were covalently linked using the zero-length cross-linker 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide in combination with N-hydroxysuccinimide, yielding a single product with an apparent molecular mass of 60 kDa. Sequence analysis and x-ray crystallographic investigations showed that the cross-linked residues were glutamic acid 82 of profilin and lysine 113 of actin. The cross-linked complex was shown to bind with high affinity to deoxyribonuclease I and poly(l-proline). It also bound and exchanged ATP with kinetics close to that of unmodified profilin-actin and inhibited the intrinsic ATPase activity of actin. This inhibition occurred even in conditions where actin normally forms filaments. By these criteria the cross-linked profilin-actin complex retains the characteristics of unmodified profilin-actin. However, the cross-linked complex did not form filaments nor copolymerized with unmodified actin, but did interfere with elongation of actin filaments in a concentration-dependent manner. These results support a polymerization mechanism where the profilin-actin heterodimer binds to the (+)-end of actin filaments, followed by dissociation of profilin, and ATP hydrolysis and P(i) release from the actin subunit as it assumes its stable conformation in the helical filament.

Association of profilin with filament-free regions of human leukocyte and platelet membranes and reversible membrane binding during platelet activation

Profilin is a conserved, widely distributed actin monomer binding protein found in eukaryotic cells. Mammalian profilin reversibly sequesters actin monomers in a high affinity profilactin complex. In vitro, the complex is dissociated in response to treatment with the polyphosphoinositides, phosphatidylinositol monophosphate, and phosphatidylinositol 4,5-bisphosphate. Here, we demonstrate the ultrastructural immunolocalization of profilin in human leukocytes and platelets. In both cell types, a significant fraction of profilin is found associated with regions of cell membrane devoid of actin filaments and other discernible structures. After platelet activation, the membrane association of profilin reversibly increases. This study represents the first direct evidence for an interaction between profilin and phospholipids in vivo.

Specificity of the interaction between phosphatidylinositol 4,5-bisphosphate and the profilin:actin complex

Profilactin, the profilin:actin complex, which is present in large amounts in extracts of many types of eukaryotic cells, appears to serve as the precursor of microfilaments. It was reported recently that profilactin interacts specifically with phosphatidylinositol 4,5-bisphosphate (PtdIns(4,5)P2) (Lassing and Lindberg: Nature 314:472-474, 1985.) The present paper describes in detail the behaviour of profilactin and profilin in the presence of different types of phospholipids and neutral lipids under different conditions. PtdIns(4,5)P2 is the only phospholipid found so far which in the presence of 80 mM KCl and at Ca2+ concentrations below 10(-5) M effectively dissociates profilactin with the resulting polymerization of the actin. Phosphatidylinositol 4-monophosphate exhibits some activity but phosphatidylinositol is inactive. Both calf spleen profilin and profilin from human platelets form stable complexes with PtdIns(4,5)P2 micelles. PtdIns(4,5)P2 is active also when incorporated together with other phospholipids in mixed vesicles.

The effect of divalent cations on the interaction between calf spleen profilin and different actins

The interaction between calf spleen profilin and actin depends critically on the status of the C-terminus of the actin, and in the case of profilin, the C-terminus is of great importance for the physiochemical behaviour of the protein. Both proteins easily lose their C-terminal amino acids during the preparation, and special care has to be taken to ensure the isolation of the proteins in the intact form. Another factor that may seriously influence the study of the interaction of profilin with actin is the presence of varying amounts of an activity that causes an apparent stabilization of the complex even at later stages of its purification. We have found conditions for the isolation of intact profilin and actin, and studied the interaction between the two proteins, including the determination of the Kdiss for the complex formed under various ionic conditions. The complex formed between profilin and actin from calf spleen was found to be significantly stronger (Kdiss less than or equal to 10(-8) M in 50 mM KCl, and Kdiss = 4.10(-7) M in 50 mM KCl, 1 mM MgCl2) than that formed between profilin and muscle alpha-actin (Kdiss = 10(-6) M in 50 mM KCl, +/- 1 mM MgCl2). The profilactin complex formed in the mammalian system was stronger than the complex formed between Acanthamoeba actin and the profilin-like protein isolated from this organism. Analysis of the formation of the calf spleen complex in the presence of varying concentrations of divalent cations gave evidence for the presence of a high-affinity divalent-cation-binding site on the spleen actin (beta, gamma) which appears to regulate the interaction with profilin.

Evidence that the phosphatidylinositol cycle is linked to cell motility

Transmembrane signaling via specific ligand/receptor interactions induces the immediate polymerization of actin and formation of microfilament assemblies close to the plasma membrane. The profilin:actin complex appears to provide the actin for this filament formation. A clue to the nature of the regulatory mechanism involved was recently found in that phosphatidylinositol 4,5-bisphosphate can bind to profilin, dissociate the profilactin complex, and thus liberate actin for polymerization. This suggests that the phosphatidylinositol (PI) cycle, which plays important roles in cellular regulation, also might control microfilament-based motility. We show here that neomycin, a drug which has a high affinity for phosphoinositides and in vivo interferes with the PI cycle, inhibits the polymerization of actin in platelets induced either by thrombin or by ADP. When ADP was used as agonist (but not in the case of thrombin) the induction of actin polymerization could also be blocked by the addition of aspirin. Introduction of Ca2+ into platelets by the use of the ionophore A23187 or stimulation of protein kinase C (PkC) by the phorbol ester TPA did not induce actin polymerization; neither did the addition of a combination of these two agents. Retinoic acid which inhibits PkC was also without effect on thrombin-induced actin polymerization.

Reversible binding of actin to gelsolin and profilin in human platelet extracts

This paper documents the reversible appearance of high-affinity complexes of profilin and gelsolin with actin in extracts of platelets undergoing activation and actin assembly. Sepharose beads coupled to either monoclonal anti-gelsolin antibodies or to polyproline were used to extract gelsolin and profilin, respectively, from EGTA-containing platelet extracts and determine the proportion of these molecules bound to actin with sufficient affinity to withstand dilution (high-affinity complexes). Resting platelets (incubated for 30 min at 37 degrees C after gel filtration) contained nearly no high-affinity actin/gelsolin or actin/profilin complexes. Thrombin, within seconds, caused quantitative conversion of platelet profilin and gelsolin to high-affinity complexes with actin, but these complexes were not present 5 min after stimulation. The calcium-dependent actin filament-severing activity of platelet extracts, a function of free gelsolin, fell in concert with the formation of EGTA-stable actin/gelsolin complexes, and rose when the adsorption experiments indicated that free gelsolin was restored. The dissociation of high-affinity complexes was temporally correlated with the accumulation of actin in the Triton-insoluble cytoskeleton.

Facilitation of actin polymerization by interfilamentous factors

The polymerization of actin in low ionic strength buffer at 0 degrees C in the presence of 0.25 mM Mg2+ was studied by viscometry, turbidity and absorbance at 232 nm. Under these conditions, significant polymerization occurred only in the viscometer and not in isotropic mixtures. The polymerization rate with 0.25 mM MgCl2, as judged from shear viscosity, was equal to or greater than that observed with 0.1 M KCl and 0.25 mM MgCl2 at 0 degrees C, and was characterized by a longer nucleation period. Measurements of the turbidity at 350 nm (detecting filament formation and aggregation) and the absorbance at 232 nm (detecting conformational changes of the G-F transition) showed no evidence for polymerization or nucleation in a bulk solution at 0 degrees C when Mg2+ was added to 0.25 mM and, furthermore, F-actin nuclei were ineffective as seeds under these conditions. However, nucleation and polymerization by these criteria could be induced by raising the temperature to 20 degrees C. These results demonstrate the existence of narrow conditions when elongation of F-actin is dissociated from nucleation of oligomeric acceptor nuclei, even if monitored on the sub-molecular level (absorbance at 232 nm). Under these conditions, elongation appears to require anisotropic F-actin, i.e. that filaments are ordered by laminar flow.

Specific interaction between phosphatidylinositol 4,5-bisphosphate and profilactin

There is evidence that the polymerization of actin takes place at the plasma membrane, and that profilactin (profilin/actin complex), the unpolymerized form of actin found in extracts of many non-muscle cells, serves as the immediate precursor. Both isolated profilin and profilactin interact with detergent when analysed by charge shift electrophoresis, indicating that they have amphipathic properties and may be able to interact directly with the plasma membrane. We demonstrate here that isolated profilin, as well as the profilactin complex, interacts with anionic phospholipids. Phosphatidylinositol 4,5-bisphosphate (PtdIns(4,5)P2) was found to be the most active phospholipid, causing a rapid and efficient dissociation of profilactin with a concomitant polymerization of the actin in appropriate conditions. These and other observations suggest the possibility of a relationship between the induction of actin filament formation and the increased activity in the phosphatidylinositol cycle seen as a result of ligand-receptor interactions in various systems.

Physical, immunochemical, and functional properties of Acanthamoeba profilin

Acanthamoebe profilin has a native molecular weight of 11,700 as measured by sedimentation equilibrium ultracentrifugation and an extinction coefficient at 280 nm of 1.4 X 10(4) M-1cm-1. Rabbit antibodies against Acanthamoeba profilin react only with the 11,700 Mr polypeptide among all other ameba polypeptides separated by electrophoresis. These antibodies react with a 11,700 Mr polypeptide in Physarum but not with any proteins of Dictyostelium or Naeglaria. Antibody-binding assays indicate that approximately 2% of the ameba protein is profilin and that the concentration of profilin is approximately 100 mumol/liter cells. During ion exchange chromatography of soluble extracts of Acanthamoeba on DEAE-cellulose, the immunoreactive profilin splits into two fractions: an unbound fraction previously identified by Reichstein and Korn (1979, J. Biol. Chem., 254:6174-6179) and a tightly bound fraction. Purified profilin from the two fractions is identical by all criteria tested. The tightly bound fraction is likely to be attached indirectly to the DEAE, perhaps by association with actin. By fluorescent antibody staining, profilin is distributed uniformly throughout the cytoplasmic matrix of Acanthamoeba. In 50 mM KCl, high concentrations of Acanthamoeba profilin inhibit the elongation rate of muscle actin filaments measured directly by electron microscopy, but the effect is minimal in KCl with 2 MgCl2. By using the fluorescence change of pyrene-labeled Acanthamoeba actin to assay for polymerization, we confirmed our earlier observation (Tseng, P. C.-H., and T. D. Pollard, 1982, J. Cell Biol. 94:213-218) that Acanthamoeba profilin inhibits nucleation much more strongly than elongation under physiological conditions.

Treadmilling of actin

Actin filaments can assemble at the barbed end and disassemble simultaneously at the pointed end. A higher monomer concentration is required to balance the association of actin monomers and the dissociation of filament subunits at the pointed end than at the barbed end. This treadmilling reaction or disparity of the apparent affinity of the two ends for monomers is caused by a continuous hydrolysis of adenosine triphosphate occurring during the association of a monomer with a filament end. In this article, in vitro investigations on treadmilling are reviewed and emerging physiological implications are discussed.

The profilin--actin complex: further characterization of profilin and studies on the stability of the complex

Two forms of profilin can be isolated from calf spleen profilactin by chromatography on phosphocellulose. They can be distinguished by C-terminal analysis, which suggests that one of them lacks the C-terminal tyrosine and the penultimate glutamine residue. This is confirmed by treatment of profilin (+Tyr) with carboxypeptidase A, which removes the C-terminal tyrosine (rapidly) and the penultimate glutamine residue (slowly), and thereby converts it to the other form as judged by chromatography on phosphocellulose. The two forms of profilin differ also in solubility and in mobility during so-called 'charge shift' electrophoresis, indicating differences in their ability to bind detergents. Recombination studies using profilin with or without a modified C-terminus demonstrated that this part of profilin is relatively unimportant for the interaction with actin. On the other hand, experiments with native and modified actin revealed that the C-terminus of actin is of the utmost importance for the stability of the profilactin complex. Analysis of the u.v. absorbance and far-u.v. circular dichroism spectra of profilin and actin did not reveal any major changes in the conformation of the proteins accompanying the modifications at the C-terminal ends. Finally, it is reported that purified profilactin contains variable amounts of a protein factor which causes an apparent stabilization of profilactin in solution.

Actin from Thyone sperm assembles on only one end of an actin filament: a behavior regulated by profilin

Thyone sperm were demembranated with Triton X-100 and, after washing, extracted with 30 mM Tris at pH 8.0 and 1 mM MgCl2. After the insoluble contaminants were removed by centrifugation, the sperm extract was warmed to 22 degrees C. Actin filaments rapidly assembled and aggregated into bundles when KCl was added to the extract. When we added preformed actin filaments, i.e., the acrosomal filament bundles of Limulus sperm, to the extract, the actin monomers rapidly assembled on these filaments. What was unexpected was that assembly took place on only one end of the bundle--the end corresponding to the preferred end for monomer addition. We showed that the absence of growth on the nonpreferred end was not due to the presence of a capper because exogenously added actin readily assembled on both ends. We also analyzed the sperm extract by SDS gel electrophoresis. Two major proteins were present in a 1:1 molar ratio: actin and a 12,500-dalton protein whose apparent isoelectric point was 8.4. The 12,500-dalton protein was purified by DEAE chromatography. We concluded that it is profilin because of its size, isoelectric point, molar ratio to actin, inability to bind to DEAE, and its effect on actin assembly. When profilin was added to actin in the presence of Limulus bundles, addition of monomers on the nonpreferred end of the bundle was inhibited, even though actin by itself assembled on both ends. Using the Limulus bundles as nuclei, we determined the critical concentration for assembly off each end of the filament and estimated the Kd for the profilin-actin complex (approximately 10 microM). We present a model to explain how profilin may regulate the extension of the Thyone acrosomal process in vivo: The profilin-actin complex can add to only the preferred end of the filament bundle. Once the actin monomer is bound to the filament, the profilin is released, and is available to bind to additional actin monomers. This mechanism accounts for the rapid rate of filament elongation in the acrosomal process in vivo.

A 90 000-dalton actin-binding protein from platelets. Comparison with villin and plasma brevin

Affinity chromatography of Ca2+-containing extracts of platelets on DNAase I-Sepharose, using Ca2+-free buffer as eluant, selects a 1:1 complex of a 90 000-dalton protein with actin. The complex shows little interaction with either DNAase or actin unless Ca2+ is present. In the presence of Ca2+, the complex nucleates polymerization of actin, reduces the viscosity attained, and delays filament formation from profilactin with characteristics closely resembling those shown by chicken villin. Proteolysis of the native proteins indicates structural similarity between the platelet protein and villin or villin core; limited proteolytic digestion in the presence of SDS distinguishes the platelet protein from villin but not from the functionally related plasma protein, brevin. The platelet protein is not accessible to enzyme-mediated iodination of surface components on intact cells. The term 'platelet brevin' is proposed for the protein.