Cellulase families and their genes

Genome analysis and genomic comparison of a fungal cultivar of the nonsocial weevil Euops chinensis reveals its plant decomposition and protective roles in fungus-farming mutualism

Fungus-farming mutualisms are models for studying co-evolutionary among species. Compared to well-documented fungus-farming in social insects, the molecular aspects of fungus-farming mutualisms in nonsocial insects have been poorly explored. Euops chinensis is a solitary leaf-rolling weevil feeding on Japanese knotweed (Fallopia japonica). This pest has evolved a special proto-farming bipartite mutualism with the fungus Penicillium herquei, which provide nutrition and defensive protection for the E. chinensis larvae. Here, the genome of P. herquei was sequenced, and the structure and specific gene categories in the P. herquei genome were then comprehensively compared with the other two well-studied Penicillium species (P. decumbens and P. chrysogenum). The assembled P. herquei genome had a 40.25  Mb genome size with 46.7% GC content. A diverse set of genes associating with carbohydrate-active enzymes, cellulose and hemicellulose degradation, transporter, and terpenoid biosynthesis were detected in the P. herquei genome. Comparative genomics demonstrate that the three Penicillium species show similar metabolic and enzymatic potential, however, P. herquei has more genes associated with plant biomass degradation and defense but less genes associating with virulence pathogenicity. Our results provide molecular evidence for plant substrate breakdown and protective roles of P. herquei in E. chinensis mutualistic system. Large metabolic potential shared by Penicillium species at the genus level may explain why some Penicillium species are recruited by the Euops weevils as crop fungi.

Transport of symbiont-encoded cellulases from the gill to the gut of shipworms via the enigmatic ducts of Deshayes: a 174-year mystery solved

Shipworms (Bivalvia, Teredinidae) are the principal consumers of wood in marine environments. Like most wood-eating organisms, they digest wood with the aid of cellulolytic enzymes supplied by symbiotic bacteria. However, in shipworms the symbiotic bacteria are not found in the digestive system. Instead, they are located intracellularly in the gland of Deshayes, a specialized tissue found within the gills. It has been independently demonstrated that symbiont-encoded cellulolytic enzymes are present in the digestive systems and gills of two shipworm species, <i>Bankia setacea</i> and <i>Lyrodus pedicellatus</i>, confirming that these enzymes are transported from the gills to the lumen of the gut. However, the mechanism of enzyme transport from gill to gut remains incompletely understood. Recently, a mechanism was proposed by which enzymes are transported within bacterial cells that are expelled from the gill and transported to the mouth by ciliary action of the branchial or food grooves. Here we use <i>in situ</i> immunohistochemical methods to provide evidence for a different mechanism in the shipworm <i>B. setacea</i>, in which cellulolytic enzymes are transported via the ducts of Deshayes, enigmatic structures first described 174 years ago, but whose function have remained unexplained.

Fermentation optimization of cellulase production from sugarcane bagasse by Bacillus pseudomycoides and molecular modeling study of cellulase

•

Isolation of cellulase producing Bacillus pseudomycoides from sugarcane bagasse.

•

Fermentation and optimization of different parameters for cellulase production.

•

Modeling and validation of cellulase enzyme.

•

Interaction dynamics between cellulase and cellulose.

Degradation of cellulosic carbon, the most important natural carbon reservoirs on this planet by cellulase is very essential for valuable soluble sugars. This cellulase has potential biotechnological applications in many industrial sectors. Thus the demand of cellulase is increasing more frequently than ever. Agro industrial byproducts and suitable microbes are of an important source for the production of cellulase. Bacillus pseudomycoides and sugarcane bagasse were used for the production of cellulase and different process parameters influencing the production of cellulase were optimized here. The bacterium showed maximum cellulase production in the presence of sugarcane bagasse, peptone and magnesium sulfate at pH 7, 40 °C in 72 h of incubation. Primary structures of the cellulase is consists of 400 amino acid residues having molecular weight 44,790 Dalton and the theoretical PI is 9.11. Physiochemical properties of cellulase indicated that the protein has instability index 25.77. Seven hydrogen bonds were observed at multiple sites of the cellulase enzyme; His269, Asp237, Asn235, Tyr271, Ser272, Gln309, Asn233. This protein structure may play first hand in further development of exploring cellulase and cellulose interaction dynamics in Bacillus sp. Thus this bacterium may be useful in various industrial applications owing to its cellulase producing capability.

Ideal Feedstock and Fermentation Process Improvements for the Production of Lignocellulolytic Enzymes

The usage of lignocellulosic biomass in energy production for biofuels and other value-added products can extensively decrease the carbon footprint of current and future energy sectors. However, the infrastructure in the processing of lignocellulosic biomass is not well-established as compared to the fossil fuel industry. One of the bottlenecks is the production of the lignocellulolytic enzymes. These enzymes are produced by different fungal and bacterial species for degradation of the lignocellulosic biomass into its reactive fibers, which can then be converted to biofuel. The selection of an ideal feedstock for the lignocellulolytic enzyme production is one of the most studied aspects of lignocellulolytic enzyme production. Similarly, the fermentation enhancement strategies for different fermentation variables and modes are also the focuses of researchers. The implementation of fermentation enhancement strategies such as optimization of culture parameters (pH, temperature, agitation, incubation time, etc.) and the media nutrient amendment can increase the lignocellulolytic enzyme production significantly. Therefore, this review paper summarized these strategies and feedstock characteristics required for hydrolytic enzyme production with a special focus on the characteristics of an ideal feedstock to be utilized for the production of such enzymes on industrial scales.

Purification and Biochemical Characterization of Alkalophilic Cellulase from the Symbiotic Bacillus subtilis BC1 of the Leopard Moth, Zeuzera pyrina (L.) (Lepidoptera: Cossidae)

In the current study, an extracellular cellulase belonging to symbiotic Bacillus subtilis Bc1 of the leopard moth is purified and characterized. The molecular mass of enzyme was 47.8 kDa using SDS-PAGE. The purified enzyme had optimum activity in temperature and pH around 60 °C and 8, respectively. The purified cellulase was introduced as a stable enzyme in a wide variety of temperature (20-80 °C) and pH (4-10) and remained active to more than 74% at 80 °C for 1 h. Moreover, the cellulase extremely was stabled in the presence of metal ions and organic solvents and its activity was increased by acetone (20% v/v), CaCl₂ and CoCl₂ and inhibited by MnCl₂ and NiCl₂. The values of enzyme's K_m and V_max were found to be 1.243 mg/mL and 271.3 µg/mL/min, respectively. The purified cellulase hydrolyzed cellulose, avicel and carboxymethyl cellulose (CMC) and the final product of CMC hydrolysis was cellobiose using thin-layer chromatography analysis. Consequently, owing to exo/endoglucanase activity and organic solvent, temperature and pH stability of the purified cellulase belong to B. subtilis BC1, it can be properly employed for various industrial purposes.

Ig-like Domain in Endoglucanase Cel9A from Alicyclobacillus acidocaldarius Makes Dependent the Enzyme Stability on Calcium

Endoglucanase Cel9A from Alicyclobacillus acidocaldarius (AaCel9A) has an Ig-like domain and the enzyme stability is dependent to calcium. In this study the effect of calcium on the structure and stability of the wild-type enzyme and the truncated form (the wild-type enzyme without Ig-like domain, AaCel9AΔN) was investigated. Fluorescence quenching results indicated that calcium increased and decreased the rigidity of the wild-type and truncated enzymes, respectively. RMSF results indicated that AaCel9A has two flexible regions (regions A and B) and deleting the Ig-like domain increased the truncated enzyme stability by decreasing the flexibility of region B probably through increasing the hydrogen bonds. Calcium contact map analysis showed that deleting the Ig-like domain decreased the calcium contacting residues and their calcium binding affinities, especially, in region B which has a role in calcium binding site in AaCel9A. Metal depletion and activity recovering as well as stability results showed that the structure and stability of the wild-type and truncated enzymes are completely dependent on and independent of calcium, respectively. Finally, one can conclude that the deletion of Ig-like domain makes AaCel9AΔN independent of calcium via decreasing the flexibility of region B through increasing the hydrogen bonds. This suggests a new role for the Ig-like domain which makes AaCel9A structure dependent on calcium.

Development of a bifunctional xylanase-cellulase chimera with enhanced activity on rice and barley straws using a modular xylanase and an endoglucanase procured from camel rumen metagenome

The camel rumen metagenome is an untapped source of glycoside hydrolases. In this study, novel genes encoding for a modular xylanase (XylC) and a cellulase (CelC) were isolated from a camel rumen metagenome and expressed in Escherichia coli BL21 (DE3). XylC with xylanase (Xyn), CBM, and carbohydrate esterase (CE) domains was characterized as a β-1,4-endoxylanase with remarkable catalytic activity on oat-spelt xylan (K cat = 2919 ± 57 s-1). The implication of XylC's modular structure in its high catalytic activity was analyzed by truncation and fusion construction with CelC. The resulting fusions including Cel-CBM, Cel-CBM-CE, and Xyn-CBM-Cel showed remarkable enhancement in CMCase activity with K cat values of 742 ± 12, 1289 ± 34.5, and 2799 ± 51 s-1 compared to CelC with a K cat of 422 ± 3.5 s-1. It was also shown that the bifunctional Xyn-CBM-Cel with synergistic xylanase/cellulase activities was more efficient than XylC and CelC in hydrolysis of rice and barley straws.

Electrochemical Assay for a Total Cellulase Activity with Improved Sensitivity

Electrochemical methods allow fast and inexpensive analysis of enzymatic activities. Here, we report a simple and yet efficient electrochemical assay for the total activity of cellulase, a hydrolytic enzyme widely used in food and textiles industries, and for production of bioethanol. The assay exploits the difference in electrochemical signals from a soluble redox indicator, ferricyanide, on nitrocellulose films treated by cellulases. Ferricyanide electrochemistry is totally inhibited on graphite electrodes modified with an insulating nitrocellulose film and is evoked after the cellulase treatment. Ferricyanide voltammetric responses correlate with the increased permeability of the films and electrochemically active surface area of electrodes becoming accessible to the ferricyanide reaction after nitrocellulose digestion by cellulase. Trichoderma and Aspergillus niger cellulases activities were determined in a 5 min assay with a sensitivity of 10^-8 U per assay, being 10³-10⁴-fold more sensitive than the standard commercially available optical assays. That makes the developed electrochemical approach the most prospective cost-effective alternative both for research and automated industrial applications.

Transcript profiles in cortical cells of maize primary root during ethylene-induced lysigenous aerenchyma formation under aerobic conditions

BACKGROUND AND AIMS

Internal aeration is important for plants to survive during periods of waterlogging, and the ability to form aerenchyma contributes by creating a continuous gas space between the shoots and the roots. Roots of maize (Zea mays) react to prolonged waterlogging by forming aerenchyma in root cortical cells by programmed cell death (PCD) in response to ethylene. The aim of this study was to understand the molecular mechanisms of ethylene-induced aerenchyma formation by identifying genes that are either up- or downregulated by ethylene treatment in maize root cortical cells.

METHODS

Three-day-old maize seedlings were treated with ethylene for several hours under aerobic conditions. Cortical cells were isolated from the primary roots using laser microdissection (LM), and transcript profiles with and without ethylene treatment were compared by microarray. In addition, the effect on ethylene-induced aerenchyma formation of diphenyleneiodonium (DPI), an inhibitor of NADPH oxidases, was examined in order to assess the involvement of reactive oxygen species (ROS).

KEY RESULTS

A total of 223 genes were identified whose transcript levels were significantly increased or decreased by ethylene treatment in root cortical cells under aerobic conditions. Subsequent tissue-specific quantitative reverse-transcription PCR analyses revealed that ethylene increased the transcript levels of genes related to ethylene signalling in all of the root tissues examined (stelar cells, cortical cells and outer cell layers), whereas it increased the transcript levels of genes related to cell wall modification and proteolysis specifically in the cortical cells. DPI treatment inhibited the ethylene-induced aerenchyma formation and suppressed expression of some cell wall modification-related genes.

CONCLUSIONS

Several genes related to cell wall modification and proteolysis are specifically up- or downregulated in cortical cells during lysigenous aerenchyma formation under aerobic conditions with ethylene treatment. The results suggest that ethylene is perceived in stelar cells, cortical cells and outer cell layers in the maize primary root, and that the cortical cell-specific PCD is controlled downstream of ethylene perception through subsequent gene expression, which is partly regulated by ROS, in the cortical cells.

Saccharification of rice straw by cellulase from a local Trichoderma harzianum SNRS3 for biobutanol production

BACKGROUND

Rice straw has shown to be a promising agricultural by-product in the bioconversion of biomass to value-added products. Hydrolysis of cellulose, a main constituent of lignocellulosic biomass, is a requirement for fermentable sugar production and its subsequent bioconversion to biofuels such as biobutanol. The high cost of commercial enzymes is a major impediment to the industrial application of cellulases. Therefore, the use of local microbial enzymes has been suggested. Trichoderma harzianum strains are potential CMCase and β-glucosidase producers. However, few researches have been reported on cellulase production by T. harzianum and the subsequent use of the crude cellulase for cellulose enzymatic hydrolysis. For cellulose hydrolysis to be efficiently performed, the presence of the whole set of cellulase components including exoglucanase, endoglucanase, and β-glucosidase at a considerable concentration is required. Biomass recalcitrance is also a bottleneck in the bioconversion of agricultural residues to value-added products. An effective pretreatment could be of central significance in the bioconversion of biomass to biofuels.

RESULTS

Rice straw pretreated using various concentrations of NaOH was subjected to enzymatic hydrolysis. The saccharification of rice straw pretreated with 2% (w/v) NaOH using crude cellulase from local T. harzianum SNRS3 resulted in the production of 29.87 g/L reducing sugar and a yield of 0.6 g/g substrate. The use of rice straw hydrolysate as carbon source for biobutanol fermentation by Clostridium acetobutylicum ATCC 824 resulted in an ABE yield, ABE productivity, and biobutanol yield of 0.27 g/g glucose, 0.04 g/L/h and 0.16 g/g glucose, respectively. As a potential β-glucosidase producer, T. harzianum SNRS3 used in this study was able to produce β-glucosidase at the activity of 173.71 U/g substrate. However, for cellulose hydrolysis to be efficient, Filter Paper Activity at a considerable concentration is also required to initiate the hydrolytic reaction. According to the results of our study, FPase is a major component of cellulose hydrolytic enzyme complex system and the reducing sugar rate-limiting enzyme.

CONCLUSION

Our study revealed that rice straw hydrolysate served as a potential substrate for biobutanol production and FPase is a rate-limiting enzyme in saccharification.

Family 1 carbohydrate binding-modules enhance saccharification rates

Cellulose degrading enzymes usually have a two-domain structure consisting of a catalytic domain and a non-catalytic carbohydrate-binding module. Although it is well known the importance of those modules in cell wall degrading process, their function is not yet fully understood. Here, we analyze the cellulose-hydrolysis activity enhancement promoted by the cellobiohydrolase I carbohydrate-binding module from Trichoderma harzianum. It was cloned, expressed, purified and used in combination with either a commercial cellulase preparation, T. reesei cellobiohydrolase I or its separate catalytic domain to hydrolyze filter paper. In all cases the amount of glucose released was increased, reaching up to 30% gain when the carbohydrate-binding module was added to the reaction. We also show that this effect seems to be mediated by a decrease in the recalcitrance of the cellulosic substrate. This effect was observed both for crystalline cellulose samples which underwent incubation with the CBM prior to application of cellulases and for the ones incubated simultaneously. Our studies demonstrate that family 1 carbohydrate-binding modules are able to potentiate the enzymatic degradation of the polysaccharides and their application might contribute to diminishing the currently prohibitive costs of the lignocellulose saccharification process.

Production of cellulolytic and xylanolytic enzymes by an Arthrographis species

A fungal isolate, Arthrographis sp. strain F4, when grown in shake-flask culture, produced cellulolytic and xylanolytic enzymes optimally at 30°C with an initial pH of 5.0 to 6.0. Coarsely-ground filter paper was the most suitable carbon substrate for production of the enzymes. Inorganic nitrogen sources gave higher activities of the enzymes than organic nitrogen sources: NH4NO3 and yeast extract was the most effective combination. Significant stimulation (P<0.05) of enzyme production was achieved with 0.1% (v/v) Tween 80.

Community composition and cellulase activity of cellulolytic bacteria from forest soils planted with broad-leaved deciduous and evergreen trees

Cellulolytic bacteria in forest soil provide carbon sources to improve the soil fertility and sustain the nutrient balance of the forest ecological system through the decomposition of cellulosic remains. These bacteria can also be utilized for the biological conversion of biomass into renewable biofuels. In this study, the community compositions and activities of cellulolytic bacteria in the soils of forests planted with broad-leaved deciduous (Chang Qing Garden, CQG) and broad-leaved evergreen (Forest Park, FP) trees in Wuhan, China were resolved through restriction fragment length polymorphism (RFLP) and sequencing analysis of the 16S rRNA gene. All of the isolates exhibited 35 RFLP fingerprint patterns and were clustered into six groups at a similarity level of 50 %. The phylogeny analysis based on the 16S rRNA gene sequence revealed that these RFLP groups could be clustered into three phylogenetic groups and further divided into six subgroups at a higher resolution. Group I consists of isolates from Bacillus cereus, Bacillus subtilis complex (I-A) and from Paenibacillus amylolyticus-related complex (I-B) and exhibited the highest cellulase activity among all of the cellulolytic bacteria isolates. Cluster II consists of isolates belonging to Microbacterium testaceum (II-A), Chryseobacterium indoltheticum (II-B), and Flavobacterium pectinovorum and the related complex (II-C). Cluster III consists of isolates belonging to Pseudomonas putida-related species. The community shift with respect to the plant species and the soil properties was evidenced by the phylogenetic composition of the communities. Groups I-A and I-B, which account for 36.0 % of the cellulolytic communities in the CQG site, are the dominant groups (88.4 %) in the FP site. Alternatively, the ratio of the bacteria belonging to group III (P. putida-related isolates) shifted from 28.0 % in CQG to 4.0 % in FP. The soil nutrient analysis revealed that the CQG site planted with deciduous broad-leaved trees has a richer organic nutrient (total organic carbon and total nitrogen) than the FP site planted with evergreen broad-leaved trees. Against this background, the population density and the diversity of cellulolytic bacteria in the CQG site are clearly higher than those in the FP site, and the latter was dominated with high-cellulase-activity Bacillus- and Paenibacillus-related bacteria. The canonical correspondence analysis further indicated that the distribution of these groups is correlated with the FP site, whereas groups II and III are correlated with the organic nutrient-rich CQG site.

How nature can exploit nonspecific catalytic and carbohydrate binding modules to create enzymatic specificity

Noncatalytic carbohydrate binding modules (CBMs) are components of glycoside hydrolases that attack generally inaccessible substrates. CBMs mediate a two- to fivefold elevation in the activity of endo-acting enzymes, likely through increasing the concentration of the appended enzymes in the vicinity of the substrate. The function of CBMs appended to exo-acting glycoside hydrolases is unclear because their typical endo-binding mode would not fulfill a targeting role. Here we show that the Bacillus subtilis exo-acting β-fructosidase SacC, which specifically hydrolyses levan, contains the founding member of CBM family 66 (CBM66). The SacC-derived CBM66 (BsCBM66) targets the terminal fructosides of the major fructans found in nature. The crystal structure of BsCBM66 in complex with ligands reveals extensive interactions with the terminal fructose moiety (Fru-3) of levantriose but only limited hydrophobic contacts with Fru-2, explaining why the CBM displays broad specificity. Removal of BsCBM66 from SacC results in a ~100-fold reduction in activity against levan. The truncated enzyme functions as a nonspecific β-fructosidase displaying similar activity against β-2,1- and β-2,6-linked fructans and their respective fructooligosaccharides. Conversely, appending BsCBM66 to BT3082, a nonspecific β-fructosidase from Bacteroides thetaiotaomicron, confers exolevanase activity on the enzyme. We propose that BsCBM66 confers specificity for levan, a branched fructan, through an "avidity" mechanism in which the CBM and the catalytic module target the termini of different branches of the same polysaccharide molecule. This report identifies a unique mechanism by which CBMs modulate enzyme function, and shows how specificity can be tailored by integrating nonspecific catalytic and binding modules into a single enzyme.

Isolation of Cellulolytic Bacillus subtilis Strains from Agricultural Environments

The bioconversion of cellulose and hemicellulose to soluble sugars is important for global stabilization and a sustainable human society. Here, hundreds of cellulolytic bacteria were screened and isolated from soil, compost, and animal waste slurry in Jeju Island, South Korea. Among the isolates, three strains, SL9-9, C5-16, and S52-2, showing higher potential for practical uses were purified on carboxymethyl cellulose (CMC) agar plates and identified as Bacillus subtilis strains by morphological, physiological, and biochemical characterization and 16S rRNA gene analysis. The production patterns of cellulose or hemicellulose-degrading enzymes were investigated during cell culture. All three isolated strains produced CMCase, Avicelase, β-glucosidase, and xylanase enzymes, which suggested synergic cellulolytic systems in Bacillus subtilis. The enzymes showing CMCase, Avicelase, and xylanase activities existed in cell-free culture supernatant, meanwhile β-glucosidase activity was detected in cell debris suggesting that three of the enzymes, including CMCase, Avicelase, and xylanase, were extracellular, and β-glucosidase was cell membrane bound. The three isolates, SL9-9, C5-16, and S52-2, were not the same strains, presenting slight differences in biochemical characteristics, 16S rRNA gene sequences, and cellulolytic enzyme activities.

Carbohydrate-binding modules promote the enzymatic deconstruction of intact plant cell walls by targeting and proximity effects

Cell wall degrading enzymes have a complex molecular architecture consisting of catalytic modules and noncatalytic carbohydrate-binding modules (CBMs). The function of CBMs in cell wall degrading processes is poorly understood. Here, we have evaluated the potential enzyme-targeting function of CBMs in the context of intact primary and secondary cell wall deconstruction. The capacity of a pectate lyase to degrade pectic homogalacturonan in primary cell walls was potentiated by cellulose-directed CBMs but not by xylan-directed CBMs. Conversely, the arabinofuranosidase-mediated removal of side chains from arabinoxylan in xylan-rich and cellulose-poor wheat grain endosperm cell walls was enhanced by a xylan-binding CBM but less so by a crystalline cellulose-specific module. The capacity of xylanases to degrade xylan in secondary cell walls was potentiated by both xylan- and cellulose-directed CBMs. These studies demonstrate that CBMs can potentiate the action of a cognate catalytic module toward polysaccharides in intact cell walls through the recognition of nonsubstrate polysaccharides. The targeting actions of CBMs therefore have strong proximity effects within cell wall structures, explaining why cellulose-directed CBMs are appended to many noncellulase cell wall hydrolases.

Production of diosgenin from yellow ginger (Dioscorea zingiberensis C. H. Wright) saponins by commercial cellulase

A commercial cellulase was first assessed to be effective in hydrolyzing glycosyl at the C-3 and C-26 positions in steroidal saponins from yellow ginger (Dioscorea zingiberensis C. H. Wright) to diosgenin, a very important chemical in the pharmaceutical industry. The effect of different parameters on enzyme hydrolysis was further investigated by systematically varying them. The highest yield was achieved when the hydrolysis ran at 55°C and pH 5.0 with an enzyme to substrate ratio of 15 × 10(3) U/g. The biotransformed products identified using TLC and HPLC confirmed that the cellulase was capable of releasing diosgenin from steroidal saponins. Moreover, the biotransformation process was explored by LC-MS and LC-MS/MS analysis. Enzymatic hydrolysis together with 40 % of the original sulphuric acid used increased the diosgenin yield by 15.4 ± 2.7% than traditional method. Therefore, the commercial cellulase may serve as a promising tool for industrial diosgenin production and for further use in saponin modification.

Optimization of cellulase mixture for efficient hydrolysis of steam-exploded corn stover by statistically designed experiments

To improve the enzymatic hydrolytic efficiency and reduce production cost, a statistically designed experimental approach was used to optimize the composition of cellulase mixture so as to maximize the amount of glucose produced from steam-exploded corn stover (SECS). Using seven purified enzymes (cellobiohydrolases, Cel7A, Cel6A, Cel6B; endoglucanases, Cel7B, Cel12A, Cel61A; and beta-glucosidase) from Trichoderma viride T 100-14 mutant strain, a multi-enzyme mixture was constituted after screening and optimization. The final optimal composition (mol%) of the multi-enzyme mixture was Cel7A (19.8%), Cel6A (37.5%), Cel6B (4.7%), Cel7B (17.7%), Cel12A (15.2%), Cel61A (2.3%) and beta-glucosidase (2.8%). The subsequent verification experiments followed by glucose assay together with scanning electron microscopy (SEM) observation confirmed the validity of the models. The multi-enzyme mixture displayed a high performance in converting the cellulosic substrate (SECS). The amount of glucose produced (15.5mg/ml) was 2.1 times as that of the crude cellulase preparation. The results indicated that the optimized cellulase mixture is an available and efficient paradigm for the hydrolysis of lignocellulosic substrate. The enhanced cellulolytic activity displayed by the constructed cellulase mixture could be used as an effective tool for producing bioethanol efficiently from cellulose.

Molecular modeling suggests induced fit of Family I carbohydrate-binding modules with a broken-chain cellulose surface

Cellobiohydrolases are the most effective single component of fungal cellulase systems; however, their molecular mode of action on cellulose is not well understood. These enzymes act to detach and hydrolyze cellodextrin chains from crystalline cellulose in a processive manner, and the carbohydrate-binding module (CBM) is thought to play an important role in this process. Understanding the interactions between the CBM and cellulose at the molecular level can assist greatly in formulating selective mutagenesis experiments to confirm the function of the CBM. Computational molecular dynamics was used to investigate the interaction of the CBM from Trichoderma reesei cellobiohydrolase I with a model of the (1,0,0) cellulose surface modified to display a broken chain. Initially, the CBM was located in different positions relative to the reducing end of this break, and during the simulations it appeared to translate freely and randomly across the cellulose surface, which is consistent with its role in processivity. Another important finding is that the reducing end of a cellulose chain appears to induce a conformational change in the CBM. Simulations show that the tyrosine residues on the hydrophobic surface of the CBM, Y5, Y31 and Y32 align with the cellulose chain adjacent to the reducing end and, importantly, that the fourth tyrosine residue in the CBM (Y13) moves from its internal position to form van der Waals interactions with the cellulose surface. As a consequence of this induced change near the surface, the CBM straddles the reducing end of the broken chain. Interestingly, all four aromatic residues are highly conserved in Family I CBM, and thus this recognition mechanism may be universal to this family.

Molecular cloning and biochemical characterization of a family-9 endoglucanase with an unusual structure from the gliding bacteria Cytophaga hut chinsonii

Cytophaga hutchinsonii was originally isolated from sugarcane piles. This microorganism therefore probably produces an array of enzymes allowing it to digest cellulosic substrates. C. hutchinsonii thus represents a rich source of potentially effective cellulase enzymes that can be harnessed for conversion of biomass to simple sugars. These sugars can then be used as feedstock for ethanol production or other chemical syntheses. In this study, we report the PCR cloning of an endoglucanase gene (Cel9A) from C. hutchinsonii using degenerated primers directed at the catalytic domain. Alignment of the amino acids sequence revealed that Cel9A has a gene structure totally different from the other known cellulose degraders. The most striking feature of this cloned protein is the absence of a cellulose-binding domain (CBD), which to date was believed to be imperative in cellulose hydrolysis. Consequently, the Cel9A gene, encoding beta-1,4 endoglucanase from C. hutchinsonii was overexpressed in Escherichia coli with a His-Tag based expression vector. The resulting polypeptide, with a molecular mass of 105 KDa, was purified from cell extracts by affinity chromatography on cellulose. Mature Cel9A was optimally active at pH 5.0 and 45 degrees C. The enzyme efficiently hydrolyzes carboxymethyl- cellulose (CMC). Analysis of CMC and filter paper hydrolysis suggests that Cel9A is a nonprocessive enzyme with endo-cellulase activities.

Isolation of cellulolytic enzymes from moldy silage by new culture-independent strategy

A culture-independent strategy has been developed for investigation of cellulases in moldy silage. By the qualitative differences in the adsorption of cellulases on lingo-cellulosics, a new cellobiohydrolase (CBH) with apparent molecular mass of 194 kDa was isolated and characterized. The entire extracellular proteins of silage were separated by two-dimensional gel electrophoresis, and five potential endoglucanases were identified by activity staining. These results demonstrate the feasibility of direct screening cellulases from environment without microorganism cultivation and this strategy could be expected to facilitate the research of uncultured microorganisms.

Molecular cloning and transcriptional expression analysis of an intracellular beta-glucosidase, a family 3 glycosyl hydrolase, from the edible straw mushroom, Volvariella volvacea

A beta-glucosidase, with a molecular mass of 95 kDa, was isolated from extracts of Volvariella volvacea mycelium grown on crystalline cellulose. Degenerate primers based on the N-terminal sequences of purified beta-glucosidase and two protease-generated peptides were used to generate cDNA fragments encoding a portion of the beta-glucosidase gene (bgl), and rapid amplification of cDNA ends was used to obtain full-length cDNA clones. The cDNA of bgl contained an ORF of 2586 bp coding for 862 amino acids. Alignment of the deduced amino-acid sequence of beta-glucosidase with deduced amino acid sequences of other microbial beta-glucosidases showed the highest overall homology with glycoside hydrolase family 3 beta-glucosidases from fungi. Transcripts of bgl were detected in total RNA extracted from mycelium grown on cellulose and cellobiose, and from mycelium pre-grown for 72 h in basal medium containing 1% (w/v) sorbitol following addition of alpha-lactose, beta-lactose, cellobiose, d- xylose, l-sorbose, beta-gentiobiose, sophorose or d-galactose. Addition of l-sorbose and d-glucosamine to mycelium grown on 1% (w/v) crystalline cellulose greatly increased the level of bgl expression. bgl Was expressed at various stages of the mushroom developmental cycle (substrate colonization to mature fruit body), although the number of bgl transcripts in pinhead and button stages was slightly smaller.

Outlook for cellulase improvement: screening and selection strategies

Cellulose is the most abundant renewable natural biological resource, and the production of biobased products and bioenergy from less costly renewable lignocellulosic materials is important for the sustainable development of human beings. A reduction in cellulase production cost, an improvement in cellulase performance, and an increase in sugar yields are all vital to reduce the processing costs of biorefineries. Improvements in specific cellulase activities for non-complexed cellulase mixtures can be implemented through cellulase engineering based on rational design or directed evolution for each cellulase component enzyme, as well as on the reconstitution of cellulase components. Here, we review quantitative cellulase activity assays using soluble and insoluble substrates, and focus on their advantages and limitations. Because there are no clear relationships between cellulase activities on soluble substrates and those on insoluble substrates, soluble substrates should not be used to screen or select improved cellulases for processing relevant solid substrates, such as plant cell walls. Cellulase improvement strategies based on directed evolution using screening on soluble substrates have been only moderately successful, and have primarily targeted improvement in thermal tolerance. Heterogeneity of insoluble cellulose, unclear dynamic interactions between insoluble substrate and cellulase components, and the complex competitive and/or synergic relationship among cellulase components limit rational design and/or strategies, depending on activity screening approaches. Herein, we hypothesize that continuous culture using insoluble cellulosic substrates could be a powerful selection tool for enriching beneficial cellulase mutants from the large library displayed on the cell surface.

Directed evolution for engineering pH profile of endoglucanase III from Trichoderma reesei

The potential of cellulase has been revealed not only in biomass conversion but also in various industrial processes, including food, textiles, laundry, pulp, and paper. Due to the need for alkali-tolerant cellulase with high specific activity at alkaline pH, for example, for application in detergent industry an error-prone PCR approach was employed for enhancing the alkali-tolerant ability of endoglucanase III (EG III) from Trichoderma reesei by error-prone PCR. One mutant (N321T) which exhibited an optimal activity at pH 5.4, corresponded to a basic shift of 0.6 pH unit compared to the wild-type enzyme, was selected and characterized. In addition, two site-directed mutations, N321D and N321H, were designed to study the role of residue at position 321. As expected, the N321D mutation changed enzyme's optimal activity to pH 4.0, resulting in a large decrease in the specific activity. However, the N321H mutated enzyme was active over a broader pH range compared to the wild type, with no much change in the specific activity. These properties suggest that the residue at position 321 is important amino acid residue in determining the pH activity profile of the EG III from T. reesei.

AcmA of Lactococcus lactis is an N-acetylglucosaminidase with an optimal number of LysM domains for proper functioning

AcmA, the major autolysin of Lactococcus lactis MG1363 is a modular protein consisting of an N-terminal active site domain and a C-terminal peptidoglycan-binding domain. The active site domain is homologous to that of muramidase-2 of Enterococcus hirae, however, RP-HPLC analysis of muropeptides released from Bacillus subtilis peptidoglycan, after digestion with AcmA, shows that AcmA is an N-acetylglucosaminidase. In the C-terminus of AcmA three highly similar repeated regions of 45 amino acid residues are present, which are separated by short nonhomologous sequences. The repeats of AcmA, which belong to the lysine motif (LysM) domain family, were consecutively deleted, removed, or, alternatively, one additional repeat was added, without destroying the cell wall-hydrolyzing activity of the enzyme in vitro, although AcmA activity was reduced in all cases. In vivo, proteins containing no or only one repeat did not give rise to autolysis of lactococcal cells, whereas separation of the producer cells from the chains was incomplete. Exogenously added AcmA deletion derivatives carrying two repeats or four repeats bound to lactococcal cells, whereas the derivative with no or one repeat did not. In conclusion, these results show that AcmA needs three LysM domains for optimal peptidoglycan binding and biological functioning.

Toward an aggregated understanding of enzymatic hydrolysis of cellulose: noncomplexed cellulase systems

Information pertaining to enzymatic hydrolysis of cellulose by noncomplexed cellulase enzyme systems is reviewed with a particular emphasis on development of aggregated understanding incorporating substrate features in addition to concentration and multiple cellulase components. Topics considered include properties of cellulose, adsorption, cellulose hydrolysis, and quantitative models. A classification scheme is proposed for quantitative models for enzymatic hydrolysis of cellulose based on the number of solubilizing activities and substrate state variables included. We suggest that it is timely to revisit and reinvigorate functional modeling of cellulose hydrolysis, and that this would be highly beneficial if not necessary in order to bring to bear the large volume of information available on cellulase components on the primary applications that motivate interest in the subject.

Isolation, characterization and manipulation of cellulase genes

The complete hydrolysis of cellulose requires a number of different enzymes including endoglucanase, exoglucanase and beta-glucosidase. These enzymes function in concert as part of a 'cellulase'complex called a cellulosome. In order (i) to develop a better understanding of the biochemical nature of the cellulase complex as well as the genetic regulation of its integral components and (ii) to utilize cellulases either as purified enzymes or as part of an engineered organism for a variety of purposes, researchers have, as a first step, used recombinant DNA technology to isolate the genes for these enzymes from a variety of organisms. This review provides some perspective on the current status of the isolation, characterization and manipulation of cellulase genes and specifically discusses (i) strategies for the isolation of endoglucanase, exoglucanase and beta-glucosidase genes; (ii) DNA sequence characterization of the cellulase genes and their accompanying regulatory elements; (iii) the expression of cellulase genes in heterologous host organisms and (iv) some of the proposed uses for isolated cellulase genes.

Cell wall attachment of a widely distributed peptidoglycan binding domain is hindered by cell wall constituents

The C-terminal region (cA) of the major autolysin AcmA of Lactococcus lactis contains three highly similar repeated regions of 45 amino acid residues (LysM domains), which are separated by nonhomologous sequences. The cA domain could be deleted without destroying the cell wall-hydrolyzing activity of the enzyme in vitro. This AcmA derivative was capable neither of binding to lactococcal cells nor of lysing these cells while separation of the producer cells was incomplete. The cA domain and a chimeric protein consisting of cA fused to the C terminus of MSA2, a malaria parasite surface antigen, bound to lactococcal cells specifically via cA. The fusion protein also bound to many other Gram-positive bacteria. By chemical treatment of purified cell walls of L. lactis and Bacillus subtilis, peptidoglycan was identified as the cell wall component interacting with cA. Immunofluorescence studies showed that binding is on specific locations on the surface of L. lactis, Enterococcus faecalis, Streptococcus thermophilus, B. subtilis, Lactobacillus sake, and Lactobacillus casei cells. Based on these studies, we propose that LysM-type repeats bind to peptidoglycan and that binding is hindered by other cell wall constituents, resulting in localized binding of AcmA. Lipoteichoic acid is a candidate hindering component. For L. lactis SK110, it is shown that lipoteichoic acids are not uniformly distributed over the cell surface and are mainly present at sites where no MSA2cA binding is observed.

Carbohydrate-binding modules recognize fine substructures of cellulose

Competition isotherms are used to identify the set of cellulose substructures to which cellulose binding modules (CBMs) from families 2a, 3, 4, 9, and 17 bind. The experiments are based on coupling a unique fluorescent tag to each CBM in a manner that does not alter the natural binding properties of the CBM and therefore allows the surface and solution concentrations of each CBM to be monitored as a function of time and composition. Adsorption and surface exchange of like or competing CBMs are monitored using a range of cellulose preparations varying in both crystallinity and provenance. CBMs from families 2a, 3, 4, 9, and 17 are shown to recognize different physical forms of prepared cellulose. The demonstration of the very fine binding specificity of cellulose-specific CBMs implies that the polysaccharide targets of CBMs extend down to the resolution of cellulose microstructures.

Characterization of Alternaria alternata glucanase genes expressed during infection of resistant and susceptible persimmon fruits

Summary Preharvest treatment with gibberellic acid (GA(3)) or its inhibitor paclobutrazol (PBZ) can reduce or increase, respectively, the susceptibility of persimmon fruits to Alternaria alternata. This was suggested to be the result of the ability of the fungus and produced endoglucanases to induce symptom development. To evaluate the importance of glucanases during A. alternata attack, five glucanase genes, corresponding to the C, F, and K families, were cloned from A. alternata using 'family-specific' oligonucleotide primers. The genes, present in a single copy, encode for exoglucanases AaC1 and AaC2, endoxylanase AaF1, endoglucanase AaK1, and the mixed-linked glucanase AaMLG1. Reverse transcriptase polymerase chain reaction (RT-PCR) analysis of RNA extracted from persimmon fruits, 2 and 4 days post-infection with A. alternata, showed the expression of all five glucanase genes in GA3- and PBZ-treated fruits. However, transcription levels and enzyme production of the endoglucanase (AaK1) and one exoglucanase (AaC1) were enhanced during A. alternata growth on cell walls from susceptible PBZ-treated fruits, whereas the expression of these genes and their enzyme production were significantly reduced in resistant GA(3)-treated fruits. The present results suggest the involvement of endo- and exoglucanase in symptom development caused by A. alternata in resistant and susceptible persimmon fruits.

Microbial cellulose utilization: fundamentals and biotechnology

Fundamental features of microbial cellulose utilization are examined at successively higher levels of aggregation encompassing the structure and composition of cellulosic biomass, taxonomic diversity, cellulase enzyme systems, molecular biology of cellulase enzymes, physiology of cellulolytic microorganisms, ecological aspects of cellulase-degrading communities, and rate-limiting factors in nature. The methodological basis for studying microbial cellulose utilization is considered relative to quantification of cells and enzymes in the presence of solid substrates as well as apparatus and analysis for cellulose-grown continuous cultures. Quantitative description of cellulose hydrolysis is addressed with respect to adsorption of cellulase enzymes, rates of enzymatic hydrolysis, bioenergetics of microbial cellulose utilization, kinetics of microbial cellulose utilization, and contrasting features compared to soluble substrate kinetics. A biological perspective on processing cellulosic biomass is presented, including features of pretreated substrates and alternative process configurations. Organism development is considered for "consolidated bioprocessing" (CBP), in which the production of cellulolytic enzymes, hydrolysis of biomass, and fermentation of resulting sugars to desired products occur in one step. Two organism development strategies for CBP are examined: (i) improve product yield and tolerance in microorganisms able to utilize cellulose, or (ii) express a heterologous system for cellulose hydrolysis and utilization in microorganisms that exhibit high product yield and tolerance. A concluding discussion identifies unresolved issues pertaining to microbial cellulose utilization, suggests approaches by which such issues might be resolved, and contrasts a microbially oriented cellulose hydrolysis paradigm to the more conventional enzymatically oriented paradigm in both fundamental and applied contexts.