Delivery systems for the administration of drugs to the periodontal pocket

Insights into Intra Periodontal Pocket Pathogenesis, Treatment, In Vitro-In Vivo Models, Products and Patents, Challenges and Opportunity

Periodontal disease is a multifactorial pathogenic condition involving microbial infection, inflammation, and various systemic complications. Here, a systematic and comprehensive review discussing key-points such as the pros and cons of conventional methods, new advancements, challenges, patents and products, and future prospects is presented. A systematic review process was adopted here by using the following keywords: periodontal diseases, pathogenesis, models, patents, challenges, recent developments, and 3-D printing scaffolds. Search engines used were "google scholar", "web of science", "scopus", and "pubmed", along with textbooks published over the last few decades. A thorough study of the published data rendered an accurate and deep understanding of periodontal diseases, the gap of research so far, and future opportunities. Formulation scientists and doctors need to be interconnected for a better understanding of the disease to prescribe a quality product. Moreover, prime challenges (such as a lack of a vital testing model, scarcity of clinical and preclinical data, products allowing for high drug access to deeper tissue regions for prolonged residence, lack of an international monitoring body, lack of 4D or time controlled scaffolds, and lack of successful AI based tools) exist that must be addressed for designing new quality products. Generally, several products have been commercialized to treat periodontal diseases with certain limitations. Various strategic approaches have been attempted to target certain delivery regions, maximize residence time, improve efficacy, and reduce toxicity. Conclusively, the current review summarizes valuable information for researchers and healthcare professional to treat a wide range of periodontal diseases.

Supra and subgingival application of antiseptics or antibiotics during periodontal therapy

Periodontal diseases (gingivitis and periodontitis) are characterized by inflammatory processes which arise as a result of disruption of the balance in the oral ecosystem. According to the current S3 level clinical practice guidelines, therapy of patients with periodontitis involves a stepwise approach that includes the control of the patient's risk factors and the debridement of supra and subgingival biofilm. This debridement can be performed with or without the use of some adjuvant therapies, including physical or chemical agents, host modulating agents, subgingivally locally delivered antimicrobials, or systemic antimicrobials. Therefore, the main aim of this article is to review in a narrative manner the existing literature regarding the adjuvant application of local agents, either subgingivally delivered antibiotics and antiseptics or supragingivally applied rinses and dentifrices, during the different steps in periodontal therapy performed in Europe.

Polysaccharide-protein microparticles based-scaffolds to recover soft tissue loss in mild periodontitis

Periodontal regeneration is extremely limited and unpredictable due to structural complications, as it requires the simultaneous restoration of different tissues, including cementum, gingiva, bone, and periodontal ligament. In this work, spray-dried microparticles based on green materials (polysaccharides - gums - and a protein - silk fibroin) are proposed to be implanted in the periodontal pocket as 3D scaffolds during non-surgical treatments, to prevent the progression of periodontal disease and to promote the healing in mild periodontitis. Arabic or xanthan gum have been associated to silk fibroin, extracted from Bombyx mori cocoons, and loaded with lysozyme due to its antibacterial properties. The microparticles were prepared by spray-drying and cross-linked by water vapor annealing, inducing the amorphous to semi-crystalline transition of the protein component. The microparticles were characterized in terms of their chemico-physical features (SEM, size distribution, structural characterization - FTIR and SAXS, hydration and degradation properties) and preclinical properties (lysozyme release, antibacterial properties, mucoadhesion, in vitro cells adhesion and proliferation and in vivo safety on a murine incisional wound model). The encouraging preclinical results highlighted that these three-dimensional (3D) microparticles could provide a biocompatible platform able to prevent periodontitis progression and to promote the healing of soft tissues in mild periodontitis.

Thermoresponsive Azithromycin-Loaded Niosome Gel Based on Poloxamer 407 and Hyaluronic Interactions for Periodontitis Treatment

Azithromycin (AZM) is a potential antimicrobial drug for periodontitis treatment. However, a potential sustained-release system is needed for intra-periodontal pocket delivery. This study focused on the development and evaluation of a thermoresponsive azithromycin-loaded niosome gel (AZG) to search for a desirable formulation for periodontitis treatment. AZG was further developed from an AZM-loaded niosomal formulation by exploiting the advantages of poloxamer 407 (P407) and hyaluronic acid (HA) interactions. The results showed that the addition of HA decreased the gelation temperature and gelation time of AZG. HA was found to increase the viscosity as well as mucoadhesive and tooth-root surface adhesive properties. The AZG solution state was injectable and exhibited pseudoplastic shear-thinning behavior. P407–HA interactions in AZG could contribute to gel strength. AZG showed 72 h of continuous drug release following the Korsmeyer–Peppas model and potentially enhanced drug permeation. The formulations apparently presented more efficient antibacterial activity against major periodontal pathogens than the standard AZM solution. AZM intra-periodontal pocket formulation and the remarkable properties of niosomes exhibited potential characteristics, including ease of administration, bioadhesion to the anatomical structure of the periodontal pocket, and sustained drug release with competent antimicrobial activity, which could be beneficial for periodontitis treatment.

Drug-Loaded Chitosan Scaffolds for Periodontal Tissue Regeneration

Chitosan is a natural anionic polysaccharide with a changeable architecture and an abundance of functional groups; in addition, it can be converted into various shapes and sizes, making it appropriate for a variety of applications. This article examined and summarized current developments in chitosan-based materials, with a focus on the modification of chitosan, and presented an abundance of information about the fabrication and use of chitosan-derived products in periodontal regeneration. Numerous preparation and modification techniques for enhancing chitosan performance, as well as the uses of chitosan and its metabolites, were reviewed critically and discussed in depth in this study. Chitosan-based products may be formed into different shapes and sizes, considering fibers, nanostructures, gels, membranes, and hydrogels. Various drug-loaded chitosan devices were discussed regarding periodontal regeneration.

Polymeric Nanotechnologies for the Treatment of Periodontitis: A Chronological Review

Periodontitis is a chronic infectious and inflammatory disease of periodontal tissues estimated to affect 70 - 80 % of all adults. At the same time, periodontium, the site of periodontal pathologies, is an extraordinarily complex plexus of soft and hard tissues, the regeneration of which using even the most advanced forms of tissue engineering continues to be a challenge. Nanotechnologies, meanwhile, have provided exquisite tools for producing biomaterials and pharmaceutical formulations capable of elevating the efficacies of standard pharmacotherapies and surgical approaches to whole new levels. A bibliographic analysis provided here demonstrates a continuously increasing research output of studies on the use of nanotechnologies in the management of periodontal disease, even when they are normalized to the total output of studies on periodontitis. The great majority of biomaterials used to tackle periodontitis, including those that pioneered this interesting field, have been polymeric. In this article, a chronological review of polymeric nanotechnologies for the treatment of periodontitis is provided, focusing on the major conceptual innovations since the late 1990s, when the first nanostructures for the treatment of periodontal diseases were fabricated. In the opening sections, the etiology and pathogenesis of periodontitis and the anatomical and histological characteristics of the periodontium are being described, along with the general clinical manifestations of the disease and the standard means of its therapy. The most prospective chemistries in the design of polymers for these applications are also elaborated. It is concluded that the amount of innovation in this field is on the rise, despite the fact that most studies are focused on the refinement of already established paradigms in tissue engineering rather than on the development of revolutionary new concepts.

Professionally Delivered Local Antimicrobials in the Treatment of Patients with Periodontitis-A Narrative Review

This review sheds light on the recent published scientific evidence relating to the use of professionally delivered local antimicrobial agents (LA’s). The review also analyses drug delivery systems available to date and provides an update on the latest scientific evidence about the benefits, limitations, and clinical results obtained by use of local drugs in the treatment of periodontal disease. The search strategy revealed randomized controlled trials (RCTs) that compared the efficacy of adjunctive LA’s to mechanical therapy alone. Based on the available evidence gathered from this review, we can infer that the use of local antimicrobial agents in conjunction to scaling and root debridement (SRD) delivers significant benefits in periodontal therapy and it is a useful aid, avoiding many of the side effects that systemic antibiotic therapy may involve. Local drug delivery (LDD) is an efficient and effective means of delivering drugs based on the evidence presented in the review. The authors of this review would suggest the use of local antimicrobials in cases of localized periodontitis or individual areas that do not respond to the usual mechanical therapy alone. This review summarizes the current use of local drug delivery in periodontal management ensuring that the general practitioners are able to choose an appropriate local antimicrobial.

Meloxicam-loaded solvent exchange-induced in situ forming beta-cyclodextrin gel and microparticle for periodontal pocket delivery

The in situ forming system has attracted attention for periodontitis treatment owing to its sustainable drug release localisation at a periodontal pocket. Given its low aqueous solubility, beta-cyclodextrin (β-CD) may serve as a matrix former of solvent exchange-induced in situ forming gel (ISG) and microparticle (ISM). Meloxicam (Mex)-loaded-β-CD ISG and ISM were prepared using β-CD in dimethyl sulphoxide (ISG) as the internal phase and camellia oil comprising 5% glyceryl monostearate as the external phase (ISM). Mex-loaded β-CD systems comprising 40% β-CD were easily injected via a 24-gauge needle. During solvent exchange with phosphate buffer saline (pH 6.8), the highly concentrated β-CD ISG promoted the phase inversion of β-CD aggregates into matrix-like. Upon exposure to aqueous phase, the ISM system comprising 40% β-CD transformed into microparticles and extended the drug release to 7 days with minimised initial burst release following Fickian diffusion. Moreover, the potential degradability was evident from the high weight loss. High maximum deformation force with high viscous character initiated the slow diffusion rate of the solvent from the ISM system. Therefore, 40% β-CD ISM is a potential local Mex-controlled release system of anti-inflammatory drug for periodontitis treatment.

Potential of chitosan-based carrier for periodontal drug delivery

Periodontal diseases are chronic infectious diseases and are a major oral health burden. With the progress in the understanding of etiology, epidemiology and pathogenesis of periodontal diseases coupled with the understanding of the polymicrobial synergy in the dysbiotic oral microbial flora, several new therapeutic targets have been identified. The strategies to curb bacterial growth and production of factors that gradually destroy the tissue surrounding and supporting the teeth have been the cornerstone for inhibiting periodontitis. Systemic administration of antibiotics for the treatment of periodontitis have shown several drawbacks including: inadequate antibiotic concentration at the site of the periodontal pocket, a rapid decline of the plasma antibiotic concentration to sub-therapeutic levels, the development of microbial resistance due to sub-therapeutic drug levels and peak-plasma antibiotic concentrations which may be associated with various side effects. These obvious disadvantages have evoked an interest in the development of localized drug delivery systems that can provide an effective concentration of antibiotic at the periodontal site for the duration of the treatment with minimal side effects. A targeted sustained release device which could be inserted in the periodontal pocket and prolong the therapeutic levels at the site of action at a much lower dose is the need of the hour. Chitosan, a deacetylated derivative of chitin has attracted considerable attention owing to its special properties including antimicrobial efficacy, biodegradability, biocompatibility and non-toxicity. It also has the propensity to act as hydrating agent and display tissue healing and osteoinducting effect. The aim of this review is to shine a spotlight on the chitosan based devices developed for drug delivery application in the effective treatment of various periodontal disorders. The chitosan based carriers like fibers, films, sponge, microparticles, nanoparticles, gels that have been designed for sustained release of drug into the periodontal pocket are highlighted.

Thermal Magnetic Field Activated Propolis Release From Liquid Crystalline System Based on Magnetic Nanoparticles

Intra-periodontal pocket drug delivery systems, such as liquid crystalline systems, are widely utilized improving the drug release control and the therapy. Propolis is used in the treatment of periodontal diseases, reducing the inflammatory and infectious conditions. Iron oxide magnetic nanoparticles (MNPs) can improve the treatment when an alternating external magnetic field (AEMF) is applied, increasing the local temperature. The aim of this study was to develop a liquid crystalline system containing MNPs for intra-periodontal pocket propolis release. MNPs were prepared using iron salts and the morphological, size, thermal, x-ray diffraction, magnetometry, and Mössbauer spectroscopy analyses were performed. Cytotoxicity studies using Artemia salina and fibroblasts were also accomplished. The systems were prepared using polyoxyethylene (10) oleyl ether, isopropyl myristate, purified water, and characterized by polarized optical microscopy, rheometry, and in vitro drug release profile using a periodontal pocket simulator apparatus. The antifungal activity of the systems was investigated against Candida spp. using an AEMF. MNPs displayed nanometric size, were monodisperse, and they displayed very low cytotoxicity. Microscopically homogeneous formulations were obtained displaying important physicochemical and biological properties. The system displayed prolonged release of propolis and important in vitro fungicide activity, which was increased when the AEMF was applied, indicating a potentially alternative therapy for the treatment of the periodontal disease.

Role of clove oil in solvent exchange-induced doxycycline hyclate-loaded Eudragit RS in situ forming gel

•

Role of clove oil (CO) in doxycycline hyclate (DH)-loaded Eudragit RS (ERS) in situ forming gel (ISG) was investigated.

•

CO could solubilize ERS and increase the viscosity of ISG and also minimize DH burst release with sustainable DH release.

•

ISGs comprising CO could expel through the 27-gauge needle and transform into matrix depot in simulated crevicular fluid.

•

Antimicrobial activities against all test bacterias were increased when increasing CO and N-methyl pyrrolidone (NMP) ratio.

•

DH-loaded ERS ISG comprising CO could be used as a local drug delivery system for periodontitis treatment.

Solvent exchange induced in situ forming gel (ISG) is the promising drug delivery system for periodontitis treatment owing to the prospect of maintaining an effective high drug level in the gingival crevicular fluid. In the present study, the influence of clove oil (CO) on the characteristics of doxycycline hyclate (DH)-loaded ISG comprising Eudragit RS (ERS) was investigated including viscosity/rheology, syringeability, in vitro gel formation/drug release, matrix formation/solvent diffusion and antimicrobial activities. CO could dissolve ERS and increase the viscosity of ISG and its hydrophobicity could also retard the diffusion of solvent and hinder the drug diffusion; thus, the minimization of burst effect and sustained drug release were achieved effectively. All the prepared ISGs comprising CO could expel through the 27-gauge needle for administration by injection and transform into matrix depot after exposure to the simulated gingival crevicular fluid. The antimicrobial activities against Staphylococcus aureus, Escherichia coli, Streptococcus mutans and Porphyromonas gingivalis were increased when the ratio of CO and N-methyl pyrrolidone (NMP) was decreased from 1:1 to 1:10 owing to higher diffusion of DH except that for C. albicans was increased as CO amount was higher. Therefore, CO could minimize the burst while prolonging the drug release of DH-loaded ERS ISG for use as a local drug delivery system for periodontitis treatment.

Silica core-shell particles for the dual delivery of gentamicin and rifamycin antibiotics

Increasing bacterial resistance calls for the simultaneous delivery of multiple antibiotics. One strategy is to design a unique pharmaceutical carrier that is able to incorporate several drugs with different physico-chemical properties. This is highly challenging as it may require the development of compartmentalization approaches. Here we have prepared core-shell silica particles allowing for the dual delivery of gentamicin and rifamycin. The effect of silica particle surface functionalization on antibiotic sorption was first studied, enlightening the role of electrostatic and hydrophobic interactions. This in turn dictates the chemical conditions for shell deposition and further sorption of these antibiotics. In particular, the silica shell deposition was favored by the positively charged layer of gentamicin coating on the core particle surface. Shell modification by thiol groups finally allowed for rifamycin sorption. The antibacterial activity of the core-shell particles against Staphylococcus aureus and Pseudomonas aeruginosa demonstrated the dual release and action of the two antibiotics.

Solvent exchange-induced in situ forming gel comprising ethyl cellulose-antimicrobial drugs

Solvent-exchanged in situ forming gel is a drug delivery system which is in sol form before administration. When it contacts with the body fluid, then the water miscible organic solvent dissipates and water penetrates into the system, leading the polymer precipitation as in situ gel at the site of injection. The aim of this research was to study the parameters affecting the gel properties, drug release and antimicrobial activities of the in situ forming gels prepared from ethyl cellulose (EC) dissolved in N-methyl pyrrolidone (NMP) to deliver the antimicrobial agents (doxycycline hyclate, metronidazole and benzyl peroxide) for periodontitis treatment. The gel appearance, pH, viscosity, rheology, syringeability, gel formation, rate of water diffusion into the gels, in vitro degradation, drug release behavior and antimicrobial activities against Staphylococcus aureus, Escherichia coli, Candida albicans, Streptococcus mutans and Porphyrommonas gingivalis were determined. Increasing the amount of EC increased the viscosity of system while still exhibiting Newtonian flow and increased the work of syringeability whereas decreased the releasing of drug. The system transformed into the rigid gel formation after being injected into the simulated gingival crevicular fluid. The developed systems containing 5% w/w antimicrobial agent showed the antimicrobial activities against all test bacteria. Thus the developed solvent exchange-induced in situ forming gels comprising EC-antimicrobial drugs exhibited potential use for periodontitis treatment.

A mini-review on novel intraperiodontal pocket drug delivery materials for the treatment of periodontal diseases

Periodontal disease is defined as chronic inflammatory condition characterized by the destruction of the periodontal tissues causing loss of connective tissue attachment, loss of alveolar bone, and the formation of pathological pockets around the diseased teeth. The use of systemic antibiotics has been advocated for its treatment, but concerns emerged with respect to adverse drug reactions and its contribution to bacterial resistance. Thus local drug delivery devices have been developed that aim to deliver a high concentration of antimicrobial drugs directly to the affected site, while minimizing drug's systemic exposure. A burst release of antimicrobial agent from carrier, resulting in a short and inadequate exposure of bacteria residing in periodontal pocket to the agent, remains the main challenge of current local delivery systems for the treatment of periodontal disease. This review aims to investigate and compare different local antimicrobial delivery systems with regard to the treatment of periodontal disease.

In situ forming implants for the delivery of metronidazole to periodontal pockets: formulation and drug release studies

This study was performed to obtain prolonged drug release with biodegradable in situ forming implants for the local delivery of metronidazole to periodontal pockets. The effect of polymer type (capped and uncapped PLGA), solvent type (water-miscible and water-immiscible) and the polymer/drug ratio on in vitro drug release studies were investigated. In situ implants with sustained metronidazole release and low initial burst consisted of capped PLGA and N-methyl-2-pyrolidone as solvent. Mucoadhesive polymers were incorporated into the in situ implants in order to modify the properties of the delivery systems towards longer residence times in vivo. Addition of the polymers changed the adhesiveness and increased the viscosity and drug release of the formulations. However, sustained drug release over 10 days was achievable. Biodegradable in situ forming implants are therefore an attractive delivery system to achieve prolonged release of metronidazole at periodontal therapy.

Prolonged delivery of ciprofloxacin and diclofenac sodium from a polymeric fibre device for the treatment of periodontal disease

In vitro analysis of drug release and antimicrobial activity of the coblended crosslinked polymeric fibre device (PFD) were investigated. The fibre loaded with ciprofloxacin and diclofenac sodium was comprised of alginate and glycerol crosslinked with barium cations. The pH dependent drug release was evident with ciprofloxacin and diclofenac sodium diffusing from the fibre at pH 4.0 compared to pH 6.8, where the fibre swelled and eroded resulting in zero-order drug release. Agar diffusion studies followed by minimum inhibitory assays were conducted to determine the antimicrobial activity of the device against Escherichia coli, Enterococcus faecalis, and Streptococcus mutans. The antimicrobial activity of the PFD was confirmed in both test assays against all test pathogens. The MIC ranges at pH 4.0 for E. coli, E. faecalis, and S. mutans were 0.5-0.8, 0.4-1.1, and 0.7-2.1 μg/mL, respectively. At pH 6.8, similar efficacies (0.3-0.5 μg/mL for E. coli and E. faecalis and 0.6-1.0 μg/mL for S. mutans) were observed. The effect of varying the plasticizer and crosslinking ion concentration on drug release profile of the fibers was further elucidated and conceptualized using molecular mechanics energy relationships (MMER) and by exploring the spatial disposition of geometrically minimized molecular conformations.

Microparticles containing propolis and metronidazole: in vitro characterization, release study and antimicrobial activity against periodontal pathogens

Ethylcellulose microparticles containing metronidazole and propolis extractive solution were prepared and evaluated in vitro against periodontal pathogens. Scanning electron microscopy, particle size analysis, drug entrapment efficiency and drug release of microparticles were determined. The antimicrobial activity of microparticles was evaluated against microorganisms of periodontal importance (Enterococcus faecalis, Streptococcus pyogenes, Streptococcus mutans, Staphylococcus aureus, Klebsiella pneumoniae and Escherichia coli). It was obtained particles with regular morphology, mean diameter of 1.23 µm, and entrapment efficiency for propolis and metronidazole were 91.41% and 22.23%, respectively. In vitro release studies of propolis and metronidazole from microparticles showed prolonged drug release and controlled by Fickian diffusion. Both propolis and metronidazole displayed activity against the tested strains. Moreover, the results showed that the strains of E. faecalis, S. pyogenes and S. mutans were more susceptible to the propolis and E. faecalis to the metronidazole. It was also observed that the amount of metronidazole to inhibit the microorganism strains in the physical mixture with propolis was smaller than in the metronidazole alone, suggesting potentiation effect between propolis and metronidazole. These microparticles would be useful for developing intermediary or eventual dosage form to be administered into the periodontal pocket more easily and safely.

Oral Bioadhesive Drug Delivery Systems

The oral mucosal cavity is a feasible, safe, and very attractive site for drug delivery with good acceptance by users. The mucosa is relatively permeable and robust, shows short recovery times after stress or damage, is tolerant to potential allergens, and has a rich blood supply. Moreover, oral mucosal drug delivery bypasses the first-pass effect and avoids presystemic elimination in the gastrointestinal tract. Bioadhesive systems provide intimate contact between a dosage form and the absorbing tissue, which may result in high concentration in a local area and hence high drug flux through the absorbing tissue. The efficacy of oral bioadhesive drug delivery systems is affected by the biological environment and the properties of the polymer and the drug. In the present paper, we review systematically some relevant citations regarding the environment, strategies for oral drug delivery and evaluation, and utilization of the main polymers.

Recent approaches for the treatment of periodontitis

Periodontal disease is a localised inflammatory response caused by the infection of a periodontal pocket arising from the accumulation of subgingival plaque. Periodontal disease has been considered as a possible risk factor for other systemic diseases such as cardiovascular diseases and pre-term low birth weight infants. Advances in understanding the aetiology, epidemiology and microbiology of periodontal pocket flora have revolutionised the therapeutic strategies for the management of periodontal disease progression. This review summarises the recent developments in the field of intra-pocket drug delivery systems and identifies areas where further research may lead to a clinically effective intra-pocket delivery system.

Chitosan inserts for periodontitis: influence of drug loading, plasticizer and crosslinking on in vitro metronidazole release

Chitosan based metronidazole (MZ) inserts were fabricated by the casting method and characterized with respect to mass and thickness uniformity, metronidazole loading and in vitro metronidazole release kinetics. The fabricated inserts exhibited satisfactory physical characteristics. The mass of inserts was in the range of 5.63 +/- 0.42 to 6.04 +/- 0.89 mg. The thickness ranged from 0.46 +/- 0.06 to 0.49 +/- 0.08 mm. Metronidazole loading was in the range of 0.98 +/- 0.09 to 1.07 +/- 0.07 mg except for batch CM3 with MZ loading of 2.01 +/- 0.08 mg. The inserts exhibited an initial burst release at the end of 24 h, irrespective of the drug to polymer ratio, plasticizer content or cross-linking. However, further drug release was sustained over the next 6 days. Cross-linking with 10% (m/m) of glutaraldehyde inhibited the burst release by approximately 30% and increased the mean dissolution time (MDT) from 0.67 to 8.59 days. The decrease in drug release was a result of reduced permeability of chitosan due to cross-linking.

Semisolid systems containing propolis for the treatment of periodontal disease: in vitro release kinetics, syringeability, rheological, textural, and mucoadhesive properties

Formulations containing poloxamer 407 (P407), carbopol 934P (C934P), and propolis extract (PE) were designed for the treatment of periodontal disease. Gelation temperature, in vitro drug release, rheology, hardness, compressibility, adhesiveness, mucoadhesion, and syringeability of formulations were determined. Propolis release from formulations was controlled by the phenomenon of relaxation of polymer chains. Formulations exhibited pseudoplastic flow and low degrees of thixotropy or rheopexy. In most samples, increasing the concentration of C934P content significantly increased storage modulus (G'), loss modulus (G''), and dynamic viscosity (eta'), at 5 degrees C, G'' exceeded G'. At 25 and 37 degrees C, eta' of each formulation depended on the oscillatory frequency. Formulations showed thermoresponsive behavior, existing as a liquid at room temperature and gel at 34-37 degrees C. Increasing the C934P content or temperature significantly increased formulation hardness, compressibility, and adhesiveness. The greatest mucoadhesion was noted in the formulation containing 15% P407 (w/w) and 0.25% C934P (w/w). The work of syringeability values of all formulations were similar and very desirable with regard to ease of administration. The data obtained in these formulations indicate a potentially useful role in the treatment of periodontitis and suggest they are worthy of clinical evaluation.

Niridazole biodegradable inserts for local long-term treatment of periodontitis: possible new life for an orphan drug

Periodontal pocket inserts of niridazole (NZ) made with Resomer(R) (grades RG 503H and RG858, designated as RH and RG, respectively) were studied. Various formulation variables were evaluated to obtain a biodegradable delivery systems showing device degradation and drug depletion parallel to each other in vitro. Drug release from the prepared inserts was evaluated using a static dissolution setup (for 1 month). Incorporation of 3 parts of RG in 1 part of RH inserts caused a 50% decrease in the initial release rate. The RH-NZ inserts showed a spurt in release around the 10th day of the study, which coincided with the decrease in device weight, suggesting onset of device degradation. Pilot-scale clinical trials in 12 patients indicated improvements in clinical indices from the baseline values. The average pocket depth was reduced significantly (alpha = 0.05) from 6.34 +/- 1.86 mm at baseline to 5.94 +/- 0.28 mm after 28 days of treatment.

Development of tetracycline-serratiopeptidase-containing periodontal gel: formulation and preliminary clinical study

The purpose of this research was to reduce the polymer concentration and to obtain reasonable viscosity at a lower concentration of pluronic by the addition of a viscosity modifier. A 20% wt/wt pluronic gel was prepared on a weight basis using the cold method. The effect of the amount of tetracycline and Aerosil on gel properties was studied. The gel was evaluated using different parameters: polarizing microscopy, gelation, gel melting, bioadhesivity, viscosity, drug release, and stability of enzyme. An in vivo study was performed to evaluate the clinical efficiency of the liquid crystalline gel. Addition of Aerosil to the gel favored hexagonal phase formation. Viscosity and bioadhesivity increased with an increase in the concentration of Aerosil. Release of tetracycline was sustained as the concentration of Aerosil increased. Various clinical parameters confirmed the acceptability and efficiency of this gel system.

Preparation and characterization of triclosan nanoparticles for periodontal treatment

The aim of this work was to produce and characterize triclosan-loaded nanoparticles (NPs) by the emulsification-diffusion process, in an attempt to obtain a novel delivery system adequate for the treatment of periodontal disease. The NPs were prepared using poly(D,L-lactide-co-glycolide) (PLGA), poly(D,L-lactide) (PLA) and cellulose acetate phthalate (CAP). Poly(vinyl alcohol) (PVAL) was used as stabilizer. Batches were prepared with different amounts of triclosan (TCS) in order to evaluate the influence of drug on NP properties. Solid NPs of less than 500 nm in diameter were obtained. Entrapment efficiencies were higher than 63.8%. The characterization by scanning electron microscopy and light scattering indicated that high concentrations of TCS seemingly caused the increase of NP mean size. A decrease in the PLGA glass transition temperature was observed by differential scanning calorimetry. This could indicate that TCS in PLGA-NPs behaves as a non-conventional plasticizer. Subsequently, in vitro release studies were carried out under sink conditions using a device designed in our laboratory to allow a direct contact between the particles and the dissolution medium. A fast release of TCS from NPs was detected. A preliminary in vivo study in dogs with induced periodontal defects suggested that TCS-loaded NPs penetrate through the junctional epithelium.

Surface effects and desorption of tetracycline supramolecular complex on bovine dentine

The aim of this in vitro study was to evaluate the antimicrobial activity, the substantivity, and surface effects of the inclusion compound tetracycline: beta-cyclodextrin on bovine roots. The antimicrobial activity was assessed by dentine slabs which had been immersed in the inclusion complex in concentrations 8.0%, 4.0%, 2.0%, 1.0%, 0.5% and 0.25% for 5min compared to a control of tetracycline hydrochloride. Each slab was tested in a broth of overnight culture of Actinobacillus actinomycetemcomitans (Y4-FDC). The inclusion complex significantly inhibited the A. actinomycetemcomitans (p<0.01) verified at concentrations from 1.0% to 8.0%. The substantivity of tetracycline was evaluated by the measure of desorption from the slabs previously immersed in solution samples and removed at 24h intervals. The tetracycline encapsulated in beta-cyclodextrin showed a flow rate near to zero order in comparison to free tetracycline. The surface morphology determined by SEM showed a more homogeneous and integrated layer with the complex compared to the effect of free tetracycline. We concluded that the root surfaces treated with tetracycline: beta-cyclodextrin release lower concentrations of active drug over 5 days at inhibitory concentrations against A. actinomycetemcomitans with enhanced disponibility in comparison to tetracycline.

Rheological characterization of bioadhesive, antimicrobial, semisolids designed for the treatment of periodontal diseases: transient and dynamic viscoelastic and continuous shear analysis

This study examined the creep behavior and oscillatory and flow properties of tetracycline-containing, bioadhesive semisolid formulations, designed for localized treatment of periodontal disease. Formulations were prepared containing hydroxyethylcellulose (HEC, 1, 3, or 5% w/w), poly(vinylpyrrolidone) (PVP, 2 or 3% w/w), polycarbophil (PC, 1 or 3% w/w), and tetracycline (5% w/w, as the hydrochloride). In creep analysis, each formulation exhibited several distinct regions that were mathematically modelled using a multi-element Voigt model with a residual spring and dashpot. Increasing the concentrations of each polymeric component decreased the elastic compliance (J(0)) yet increased the residual viscosity. In oscillatory analysis, increased polymer concentrations increased the storage modulus (G'), the loss modulus (G") and the dynamic viscosity (eta'), yet decreased the loss tangent (tan delta). The relationships between G' or G" and frequency were observed to plateau at higher frequencies, which is indicative of polymer chain entanglement and network formation. With the exception of formulations containing 1% HEC, the formulations were elastic (tan delta < 1), with large G' and small J(0) values. All formulations exhibited pseudoplastic flow with thixotropy. Increasing concentrations of each polymeric component increased the zero-shear viscosity (determined using the Cross model) and was further evidence of polymer chain entanglement. Formulations containing 1% w/w HEC possessed excellent flow properties, however, their thixotropic behavior and essentially elastoviscous nature (large J(0) and tan delta) would be disadvantageous for use in the treatment of periodontal disease because of rapid removal from the pocket and relatively uncontrolled drug release. Despite their advantageous viscoelastic properties, the flow properties of formulations containing 5% w/w HEC were inappropriate, rendering administration through a periodontal syringe potentially difficult. Based on their rheological behavior, formulations containing HEC (3% w/w), PVP (2 or 3% w/w), and PC (1 or 3% w/w) would be suitable for clinical application. However, consideration of other physicochemical properties (e.g., bioadhesion, drug release kinetics) must be performed prior to selection of the most suitable formulation for clinical examination. This study has highlighted the successful complimentary application of creep analysis and oscillatory and flow rheometry for the characterization and development of bioadhesive semisolid formulations for the treatment of periodontal disease.

In vitro permeation profile of a local anaesthetic compound from topical formulations with different rheological behaviour--verified by in vivo efficacy data

The object of this study was to develop a topical cream of suitable consistency, i.e. with a high apparent yield stress, without affecting the in vitro permeation profile and the subsequent in vivo efficacy of the formulation. Different formulations of a model compound were manufactured, an oil-in-water (o/w) emulsion, a cream consisting of the o/w emulsion thickened with various concentrations of neutralised Carbopol934P gel, and a semisolid water-in-oil (w/o) emulsion. Rheological measurements were performed giving the apparent yield stress of the formulations. The in vitro permeation rate of the compound was measured, using static diffusion cells with both guinea pig and human skin as membrane. The o/w emulsion without polymer was used as reference. The in vivo efficacy of the formulations was investigated on guinea pigs by the pinprick method. The apparent yield stress of the w/o emulsion was in the same range as that of the most viscous o/w cream while the o/w emulsion behaved as a Newtonian liquid. Furthermore, the yielding property of the w/o emulsion was not as temperature-sensitive as that of the o/w cream. The permeation rate of the compound from the two emulsions, o/w and w/o, was similar at 6% (w/w), while the o/w cream resulted in a significantly lower permeation rate at the same concentration. The two emulsions produced sufficient and comparable in vivo efficacy, while the o/w cream was less efficient. In conclusion, a reversed-phase emulsion may be used to produce the appropriate apparent yield stress, without affecting the in vivo efficacy of the formulation. The viscosity of a w/o emulsion depends on the amount of the aqueous phase and the degree of dispersity. Thus, the transport of the active compound is not prevented by the excipients present in the formulation, as is the case for the o/w cream.

Novel periodontal drug delivery system for treatment of periodontitis

A conceptually novel periodontal drug delivery system (DDS) is described that is intended for treatment of microbial infections associated with periodontitis. The DDS is a composite wafer with surface layers possessing adhesive properties, while the bulk layer consists of antimicrobial agents, biodegradable polymers, and matrix polymers. The wafers contain poly(lactic-co-glycolic acid) as the main bioerodible component used in the bulk layer and ethyl cellulose applied as a matrix polymer enabling diffusion-controlled release. Starch and other polymers in combination with AgNO(3) serve as coatings adhesive to the teeth. In vitro experiments demonstrate that the wafers are capable of zero-order release of antimicrobial agents such as silver nitrate, benzylpenicillin, and tetracycline, for over 4 weeks.

Sustained release of silver from periodontal wafers for treatment of periodontitis

Periodontal wafers intended to treat the underlying infections in patients with periodontitis have been developed. The wafers consist of poly(lactic-co-glycolic acid) as a primary bioerodible polymeric component, poly(ethylene glycol) as a plasticizer and encapsulation aid, and silver nitrate as the antimicrobial agent. The wafers are capable of sustained in vitro release of bioactive silver for at least 4 weeks. The wafers exhibit silver release that follows erosion kinetics, confirming a bulk erosion/release mechanism. In clinical evaluation, sustained release of silver at bactericidal levels for at least 21 days is observed. Staining of hard and soft tissues due to the released silver is minimal and reversible.

Controlled and targeted drug delivery strategies towards intraperiodontal pocket diseases

Advances in the understanding of the aetiology, epidemiology, pathogenesis and microbiology of periodontal pocket flora have revolutionized the strategies for the management of intraperiodontal pocket diseases. Intra-pocket, sustained release, drug delivery devices have been shown to be clinically effective in the treatment of periodontal infections. Several degradable and non-degradable devices are under investigation for the delivery of antimicrobial agents into the periodontal pocket including non-biodegradable fibres, films (biodegradable and non-biodegradable), bio-absorbable dental materials, biodegradable gels/ointments, injectables and microcapsules. With the realization that pocket bacteria accumulate as biofilms, studies are now being directed towards eliminating/killing biofilm concentrations rather than their planktonic (fluid phase) counterparts. Intraperiodontal pocket drug delivery has emerged as a novel paradigm for the future research. Similarly, bioadhesive delivery systems are explored that could significantly improve oral therapeutics for periodontal disease and mucosal lesions. A strategy is to target a wide range of molecular mediators of tissue destruction and hence arrest periodontal disease progression. Research into regenerating periodontal structures lost as a result of disease has also shown substantial progress in the last 25 years.

Physicochemical characterization and preliminary in vivo efficacy of bioadhesive, semisolid formulations containing flurbiprofen for the treatment of gingivitis

In this study, the physicochemical properties and preliminary in vivo clinical performance of formulations containing hydroxyethylcellulose (HEC; 3, 5, 10% w/w), poly(vinylpyrrolidone) (PVP; 3, 5% w/w), polycarbophil (PC; 1, 3, 5% w/w), and flurbiprofen (5% w/w) were examined. Flurbiprofen release into PBS pH 7.4 was performed at 37 degrees C. The mechanical properties (hardness, compressibility, adhesiveness, initial stress) and syringeability of formulations were determined using a texture analyzer in texture profile analysis (TPA) and compression modes, respectively. In general, the time required for release of 10 and 30% of the original mass of flurbiprofen (t10%, t30%) increased as the concentration of each polymeric component increased. However, in the presence of either 5 or 10% HEC and 5% PC, increased PVP concentration decreased both t10%, t30% due to excessive swelling (and disintegration) of these formulations. Increased concentrations of HEC, PVP, and PC significantly increased formulation hardness, compressibility, work of syringe expression, and initial stress due to the effects of these polymers on formulation viscoelasticity. Similarly, increased concentrations of PC (primarily), HEC, and PVP increased formulation adhesiveness due to the known bioadhesive properties of these polymers. Clinical efficacies of formulations containing 3% HEC, 3% PVP, 3% PC, and either 0% (control) or 5% (test) flurbiprofen, selected to offer optimal drug release and mechanical properties, were evaluated and clinically compared in an experimental gingivitis model. The test (flurbiprofen-containing) formulation significantly reduced gingival inflammation, as evaluated using the gingival index, and the gingival crevicular fluid volume, whereas, these clinical parameters were generally increased in volunteers who had received the control formulation. There were no observed differences in the plaque indices of the two subject groups, confirming that the observed differences in gingival inflammation could not be accredited to differences in plaque accumulation. This study has shown both the applicability of the in vitro methods used, particularly TPA, for the rational selection of formulations for clinical evaluation and, additionally, the clinical benefits of the topical application of a bioadhesive semisolid flurbiprofen-containing formulation for the treatment of experimental gingivitis.

An in vivo study of the chlorhexidine release profile of the PerioChip in the gingival crevicular fluid, plasma and urine

The release profile of chlorhexidine from the PerioChip (Chip), a biodegradable local delivery system that contains 2.5 mg of chlorhexidine gluconate (CHX) in a cross-linked hydrolyzed gelatin matrix, into the gingival crevice, was evaluated in an in vivo, open label, single-center, 10-day pharmacokinetic study conducted on 19 volunteers with chronic adult periodontitis. Each volunteer had a single chip inserted into each of 4 selected pockets, with probing pocket depths of between 5-8 mm, at time 0. Gingival crevicular fluid (GCF) samples were collected using filter paper strips prior to Chip placement and at 2 h, 4 h, 24 h and 2, 3, 4, 5, 6, 8, and 9 days post-Chip placement. The GCF volume was measured using a calibrated Periotron 6000. Blood samples were collected at times 0, 1, 4, 8, 12 h and 5 days post-dosing. Urine was collected as a total 24-h specimen immediately post-dosing and 2 single samples at time 0, prior to dosing, and 5 days. The CHX was eluted from the paper strips and the CHX levels in GCF, blood and urine quantified using HPLC. The results indicate an initial peak concentration of CHX in the GCF at 2 h post-Chip insertion (2007 microg/ml) with slightly lower concentrations of between 1300-1900 microg/ml being maintained over the next 96 h. The CHX concentration then progressively decreased until study conclusion with significant CHX concentrations (mean=57 microg/ml) still being detectable at study termination. CHX was not detectable in any of the plasma or urine samples at any time point during the study. These results indicate that the PerioChip can maintain clinically effective levels of CHX in the GCF of periodontal pockets for over 1 week with no detectable systemic absorption.

Biodegradable microparticles for sustained delivery of tetracycline to the periodontal pocket: formulatory and drug release studies

This paper describes the production and characterization of biodegradable microparticles containing tetracycline, designed for periodontal disease therapy. The influence of production parameters on microparticle characteristics and antibiotic release modality was studied. Microparticles were made by using different preparation procedures and different polyesters, namely poly(L-lactide), [L-PLA] poly(DL-lactide), [DL-PLA] and poly(DL-lactide-co-glycolide) 50:50, [DL-PLG]. A double emulsion preparation method together with a concentrated salt solution as external phase gave the best results in terms of tetracycline incorporation efficacy. In vitro release experiments demonstrated that tetracycline is slowly and appropriately released from microparticles. Release kinetics were found to be influenced by the type of polymer utilized for microparticle production. In vitro experiments, simulating in vivo conditions were carried out for up to 30 days. Only DL-PLG microparticles showed significant changes in their morphology, whereas L-PLA and DL-PLA were found almost intact after the same period of time.