Improved methods for determination of rotational symmetries in macromolecules

Nuclear RNR-α antagonizes cell proliferation by directly inhibiting ZRANB3

Since the origins of DNA-based life, the enzyme ribonucleotide reductase (RNR) has spurred proliferation because of its rate-limiting role in de novo deoxynucleoside-triphosphate (dNTP) biosynthesis. Paradoxically, the large subunit, RNR-α, of this obligatory two-component complex in mammals plays a context-specific antiproliferative role. There is little explanation for this dichotomy. Here, we show that RNR-α has a previously unrecognized DNA-replication inhibition function, leading to growth retardation. This underappreciated biological activity functions in the nucleus, where RNR-α interacts with ZRANB3. This process suppresses ZRANB3's function in unstressed cells, which we show to promote DNA synthesis. This nonreductase function of RNR-α is promoted by RNR-α hexamerization-induced by a natural and synthetic nucleotide of dA/ClF/CLA/FLU-which elicits rapid RNR-α nuclear import. The newly discovered nuclear signaling axis is a primary defense against elevated or imbalanced dNTP pools that can exert mutagenic effects irrespective of the cell cycle.

The Primary Enveloped Virion of Herpes Simplex Virus 1: Its Role in Nuclear Egress

Many viruses migrate between different cellular compartments for successive stages of assembly. The HSV-1 capsid assembles in the nucleus and then transfers into the cytoplasm. First, the capsid buds through the inner nuclear membrane, becoming coated with nuclear egress complex (NEC) protein. This yields a primary enveloped virion (PEV) whose envelope fuses with the outer nuclear membrane, releasing the capsid into the cytoplasm. We investigated the associated molecular mechanisms by isolating PEVs from US3-null-infected cells and imaging them by cryo-electron microscopy and tomography. (pUS3 is a viral protein kinase in whose absence PEVs accumulate in the perinuclear space.) Unlike mature extracellular virions, PEVs have very few glycoprotein spikes. PEVs are ~20% smaller than mature virions, and the little space available between the capsid and the NEC layer suggests that most tegument proteins are acquired later in the egress pathway. Previous studies have proposed that NEC is organized as hexamers in honeycomb arrays in PEVs, but we find arrays of heptameric rings in extracts from US3-null-infected cells. In a PEV, NEC contacts the capsid predominantly via the pUL17/pUL25 complexes which are located close to the capsid vertices. Finally, the NEC layer dissociates from the capsid as it leaves the nucleus, possibly in response to pUS3-mediated phosphorylation. Overall, nuclear egress emerges as a process driven by a program of multiple weak interactions.IMPORTANCE On its maturation pathway, the newly formed HSV-1 nucleocapsid must traverse the nuclear envelope, while respecting the integrity of that barrier. Nucleocapsids (125 nm in diameter) are too large to pass through the nuclear pore complexes that conduct most nucleocytoplasmic traffic. It is now widely accepted that the process involves envelopment/de-envelopment of a key intermediate-the primary enveloped virion. In wild-type infections, PEVs are short-lived, which has impeded study. Using a mutant that accumulates PEVs in the perinuclear space, we were able to isolate PEVs in sufficient quantity for structural analysis by cryo-electron microscopy and tomography. The findings not only elucidate the maturation pathway of an important human pathogen but also have implications for cellular processes that involve the trafficking of large macromolecular complexes.

Intracellular Distribution of Capsid-Associated pUL77 of Human Cytomegalovirus and Interactions with Packaging Proteins and pUL93

DNA packaging into procapsids is a common multistep process during viral maturation in herpesviruses. In human cytomegalovirus (HCMV), the proteins involved in this process are terminase subunits pUL56 and pUL89, which are responsible for site-specific cleavage and insertion of the DNA into the procapsid via portal protein pUL104. However, additional viral proteins are required for the DNA packaging process. We have shown previously that the plasmid that encodes capsid-associated pUL77 encodes another potential player during capsid maturation. Pulse-chase experiments revealed that pUL77 is stably expressed during HCMV infection. Time course analysis demonstrated that pUL77 is expressed in the early late part of the infectious cycle. The sequence of pUL77 was analyzed to find nuclear localization sequences (NLSs), revealing monopartite NLSm at the N terminus and bipartite NLSb in the middle of pUL77. The potential NLSs were inserted into plasmid pHM829, which encodes a chimeric protein with β-galactosidase and green fluorescent protein. In contrast to pUL56, neither NLSm nor NLSb was sufficient for nuclear import. Furthermore, we investigated by coimmunoprecipitation whether packaging proteins, as well as pUL93, the homologue protein of herpes simplex virus 1 pUL17, are interaction partners of pUL77. The interactions between pUL77 and packaging proteins, as well as pUL93, were verified.

IMPORTANCE

We showed that the capsid-associated pUL77 is another potential player during capsid maturation of HCMV. Protein UL77 (pUL77) is a conserved core protein of HCMV. This study demonstrates for the first time that pUL77 has early-late expression kinetics during the infectious cycle and an intrinsic potential for nuclear translocation. According to its proposed functions in stabilization of the capsid and anchoring of the encapsidated DNA during packaging, interaction with further DNA packaging proteins is required. We identified physical interactions with terminase subunits pUL56 and pUL89 and another postulated packaging protein, pUL93, in infected, as well as transfected, cells.

Electron Microscopy and Image Processing: Essential Tools for Structural Analysis of Macromolecules

Macromolecular electron microscopy typically depicts the structures of macromolecular complexes ranging from ∼200 kDa to hundreds of MDa. The amount of specimen required, a few micrograms, is typically 100 to 1000 times less than needed for X-ray crystallography or nuclear magnetic resonance spectroscopy. Micrographs of frozen-hydrated (cryogenic) specimens portray native structures, but the original images are noisy. Computational averaging reduces noise, and three-dimensional reconstructions are calculated by combining different views of free-standing particles ("single-particle analysis"). Electron crystallography is used to characterize two-dimensional arrays of membrane proteins and very small three-dimensional crystals. Under favorable circumstances, near-atomic resolutions are achieved. For structures at somewhat lower resolution, pseudo-atomic models are obtained by fitting high-resolution components into the density. Time-resolved experiments describe dynamic processes. Electron tomography allows reconstruction of pleiomorphic complexes and subcellular structures and modeling of macromolecules in their cellular context. Significant information is also obtained from metal-coated and dehydrated specimens.

Pch2 is a hexameric ring ATPase that remodels the chromosome axis protein Hop1

In budding yeast the pachytene checkpoint 2 (Pch2) protein regulates meiotic chromosome axis structure by maintaining the domain-like organization of the synaptonemal complex proteins homolog pairing 1 (Hop1) and molecular zipper 1 (Zip1). Pch2 has also been shown to modulate meiotic double-strand break repair outcomes to favor recombination between homologs, play an important role in the progression of meiotic recombination, and maintain ribosomal DNA stability. Pch2 homologs are present in fruit flies, worms, and mammals, however the molecular mechanism of Pch2 function is unknown. In this study we provide a unique and detailed biochemical analysis of Pch2. We find that purified Pch2 is an AAA+ (ATPases associated with diverse cellular activities) protein that oligomerizes into single hexameric rings in the presence of nucleotides. In addition, we show Pch2 binds to Hop1, a critical axial component of the synaptonemal complex that establishes interhomolog repair bias, in a nucleotide-dependent fashion. Importantly, we demonstrate that Pch2 displaces Hop1 from large DNA substrates and that both ATP binding and hydrolysis by Pch2 are required for Pch2-Hop1 transactions. Based on these and previous cell biological observations, we suggest that Pch2 impacts meiotic chromosome function by directly regulating Hop1 localization.

Exploiting radiation damage to map proteins in nucleoprotein complexes: the internal structure of bacteriophage T7

In the final stage of radiation damage in cryo-electron microscopy of proteins, bubbles of hydrogen gas are generated. Proteins embedded in DNA bubble sooner than free-standing proteins and DNA does not bubble under the same conditions. These properties make it possible to distinguish protein from DNA. Here we explored the scope of this technique ("bubblegram imaging") by applying it to bacteriophage T7, viewed as a partially defined model system. T7 has a thin-walled icosahedral capsid, 60 nm in diameter, with a barrel-shaped protein core under one of its twelve vertices (the portal vertex). The core is densely wrapped with DNA but details of their interaction and how their injection into a host bacterium is coordinated are lacking. With short (10 s) intervals between exposures of 17 electrons/Å(2) each, bubbling starts in the third exposure, with 1-4 bubbles nucleating in the core: in subsequent exposures, these bubbles grow and merge. A 3D reconstruction from fifth-exposure images depicts a bipartite cylindrical gas cloud in the core. In its portal-proximal half, the axial region is gaseous whereas in the portal-distal half, it is occupied by a 3 nm-wide dense rod. We propose that they respectively represent core protein and an end of the packaged genome, poised for injection into a host cell. Single bubbles at other sites may represent residual scaffolding protein. Thus, bubbling depends on dose rate, protein amount, and tightness of the DNA seal.

Characterization of the molecular architecture of human caveolin-3 and interaction with the skeletal muscle ryanodine receptor

Caveolin-3 (cav-3), an integral membrane protein, is a building block of caveolae as well as a regulator of a number of physiological processes by facilitating the formation of multiprotein signaling complexes. We report that the expression of cav-3 in insect (Sf9) cells induces caveola formation, comparable in size with those observed in native tissue. We have also purified the recombinant cav-3 determining that it forms an oligomer of ∼220 kDa. We present the first three-dimensional structure for cav-3 (using transmission electron microscopy and single particle analysis methods) and show that nine cav-3 monomers assemble to form a complex that is toroidal in shape, ∼16.5 nm in diameter and ∼ 5.5 nm in height. Labeling experiments and reconstitution of the purified cav-3 into liposomes have allowed a proposal for the orientation of the protein with respect to the membrane. We have identified multiple caveolin-binding motifs within the ryanodine receptor (RyR1) sequence employing a bioinformatic analysis. We have then shown experimentally that there is a direct interaction between recombinant cav-3 nonamers and purified RyR1 homotetramers that would imply that at least one of the predicted cav-3-binding sites is exposed within the fully assembled RyR1 structure. The cav-3 three-dimensional model provides new insights as to how a cav-3 oligomer can bind multiple partners in close proximity to form signaling complexes. Furthermore, a direct interaction with RyR1 suggests a possible role for cav-3 as a modifier of muscle excitation-contraction coupling and/or for localization of the receptor to regions of the sarcoplasmic reticulum.

Alternative oligomeric states of the yeast Rvb1/Rvb2 complex induced by histidine tags

Rvb1 and Rvb2 are essential AAA(+) (ATPases associated with diverse cellular activities) helicases, which are important components of critical complexes such as chromatin remodeling and telomerase complexes. The oligomeric state of the Rvb proteins has been controversial. Independent studies from several groups have described the yeast and human Rvb1/Rvb2 complex both as a single and as a double hexameric ring complex. We found that histidine-tagged constructs of yeast Rvb proteins employed in some of these studies induced the assembly of double hexameric ring Rvb1/Rvb2 complexes. Instead, untagged versions of these proteins assemble into single hexameric rings. Furthermore, purified endogenous untagged Rvb1/Rvb2 complexes from Saccharomyces cerevisiae were also found as single hexameric rings, similar to the complexes assembled in vitro from the purified untagged components. These results demonstrate that some of the differences between the reported structures are caused by histidine tags and imply that further studies on the purified proteins should be carried out using untagged constructs.

Structure of the cholera toxin secretion channel in its closed state

The type II secretion system (T2SS) is a macromolecular complex spanning the inner and outer membranes of Gram-negative bacteria. Remarkably, the T2SS secretes folded proteins, including multimeric assemblies such as cholera toxin and heat-labile enterotoxin from Vibrio cholerae and enterotoxigenic Escherichia coli, respectively. The major outer membrane T2SS protein is the 'secretin' GspD. Cryo-EM reconstruction of the V. cholerae secretin at 19-Å resolution reveals a dodecameric structure reminiscent of a barrel, with a large channel at its center that contains a closed periplasmic gate. The GspD periplasmic domain forms a vestibule with a conserved constriction, and it binds to a pentameric exoprotein and to the trimeric tip of the T2SS pseudopilus. By combining our results with structures of the cholera toxin and T2SS pseudopilus tip, we provide a structural basis for a possible secretion mechanism of the T2SS.

The Clp chaperones and proteases of the human malaria parasite Plasmodium falciparum

The Clp chaperones and proteases play an important role in protein homeostasis in the cell. They are highly conserved across prokaryotes and found also in the mitochondria of eukaryotes and the chloroplasts of plants. They function mainly in the disaggregation, unfolding and degradation of native as well as misfolded proteins. Here, we provide a comprehensive analysis of the Clp chaperones and proteases in the human malaria parasite Plasmodium falciparum. The parasite contains four Clp ATPases, which we term PfClpB1, PfClpB2, PfClpC and PfClpM. One PfClpP, the proteolytic subunit, and one PfClpR, which is an inactive version of the protease, were also identified. Expression of all Clp chaperones and proteases was confirmed in blood-stage parasites. The proteins were localized to the apicoplast, a non-photosynthetic organelle that accommodates several important metabolic pathways in P. falciparum, with the exception of PfClpB2 (also known as Hsp101), which was found in the parasitophorous vacuole. Both PfClpP and PfClpR form mostly homoheptameric rings as observed by size-exclusion chromatography, analytical ultracentrifugation and electron microscopy. The X-ray structure of PfClpP showed the protein as a compacted tetradecamer similar to that observed for Streptococcus pneumoniae and Mycobacterium tuberculosis ClpPs. Our data suggest the presence of a ClpCRP complex in the apicoplast of P. falciparum.

Short hairpin RNAs specific to human cytomegalovirus terminase subunit pUL89 prevent viral maturation

BACKGROUND

In order to define the role of the human cytomegalovirus (HCMV) small terminase subunit pUL89, analysis by RNA interference was applied.

METHODS

Cell lines expressing pUL89-specific short hairpin RNAs (shRNAs) were constructed by transduction of shRNAs via infection with retroviral vectors. These cell lines were infected with HCMV AD169 and were analysed for pUL89 expression, viral yield, plaque reduction, amount of viral DNA and particle formation.

RESULTS

After infection of the cell lines with HCMV, the expression of pUL89 was reduced by up to 86% for shRNA_A and 84% for shRNA_B at the later time points of infection. Cell lines expressing shRNA_C and the control had no effect on the pUL89 expression level. In addition, the inhibitory effect corresponded to a decrease in viral growth kinetics, viral DNA and plaque formation. Analysis by electron microscopy demonstrated that infection of cells expressing pUL89-specific shRNA_A and shRNA_B resulted in a complete inhibition of viral particle formation.

CONCLUSIONS

HCMV is a serious life-threatening opportunistic pathogen in immunocompromised patients. Because of multiple problems caused by the current available drugs, development of new strategies are needed. Our data clearly demonstrate that pUL89-specific shRNAs mediated the inhibition of formation of replicative infectious particles and therefore represent a new promising mechanism for antiviral therapy against HCMV infection.

Human cytomegalovirus packaging: an update on structure–function relationships

DNA packaging of human cytomegalovirus is a key step in viral replication. Enzymes required for this process are the terminase subunits pUL56 and pUL89. Together with the portal protein, pUL104, they form a powerful biological nanomotor. It has been demonstrated that for tailed dsDNA bacteriophages, DNA translocation into preformed capsid needs an extraordinary amount of energy. The terminase subunit pUL56 provides the required ATP-hydrolyzing activity for DNA packaging. The necessary nuclease activity to process the concatemers into unit-length genomes is mediated by the terminase subunit pUL89. The ring-like structure of both terminase subunits is in concordance with their function as DNA-metabolizing proteins. Binding to the portal is a prerequisite for DNA translocation into the capsid. The latest models suggest that the terminase moves along some domains of the DNA by a binding and release mechanism.

The P22 tail machine at subnanometer resolution reveals the architecture of an infection conduit

The portal channel is a key component in the life cycle of bacteriophages and herpesviruses. The bacteriophage P22 portal is a 1 megadalton dodecameric oligomer of gp1 that plays key roles in capsid assembly, DNA packaging, assembly of the infection machinery, and DNA ejection. The portal is the nucleation site for the assembly of 39 additional subunits generated from multiple copies of four gene products (gp4, gp10, gp9, and gp26), which together form the multifunctional tail machine. These components are organized with a combination of 12-fold (gp1, gp4), 6-fold (gp10, trimers of gp9), and 3-fold (gp26, gp9) symmetry. Here we present the 3-dimensional structures of the P22 assembly-naive portal formed from expressed subunits (gp1) and the intact tail machine purified from infectious virions. The assembly-naive portal structure exhibits a striking structural similarity to the structures of the portal proteins of SPP1 and phi29 derived from X-ray crystallography.

Poliovirus 2C protein forms homo-oligomeric structures required for ATPase activity

The poliovirus protein 2C plays an essential role in viral RNA replication, although its precise biochemical activities or structural requirements have not been elucidated. The protein has several distinctive properties, including ATPase activity and membrane and RNA binding, that are conserved among orthologs of many positive-strand RNA viruses. Sequence alignments have placed these proteins in the SF3 helicase family, a subset of the AAA+ ATPase superfamily. A feature common to AAA+ proteins is the formation of oligomeric rings that are essential for their catalytic functions. Here we show that a recombinant protein, MBP-2C, in which maltose-binding protein was fused to 2C, formed soluble oligomers and that ATPase activity was restricted to oligomer-containing fractions from gel-filtration chromatography. The active fraction was visualized by negative-staining electron microscopy as ring-like particles composed of 5-8 protomers. This conclusion was confirmed by mass measurements obtained by scanning transmission electron microscopy. Mutation of amino acid residues in the 2C nucleotide-binding domain demonstrated that loss of the ability to bind or hydrolyze ATP did not affect oligomerization. Co-expression of active MBP-2C and inactive mutant proteins generated mixed oligomers that exhibited little ATPase activity, suggesting that incorporation of inactive subunits eliminates the function of the entire particle. Finally, deletion of the N-terminal 38 amino acids blocked oligomerization of the fusion protein and eliminated ATPase activity, despite retention of an unaltered nucleotide-binding domain.

Three-dimensional reconstruction of the Shigella T3SS transmembrane regions reveals 12-fold symmetry and novel features throughout

Type III secretion systems (T3SSs) mediate bacterial protein translocation into eukaryotic cells, a process essential for virulence of many Gram-negative pathogens. They are composed of a cytoplasmic secretion machinery and a base that bridges both bacterial membranes, into which a hollow, external needle is embedded. When isolated, the latter two parts are termed the 'needle complex'. An incomplete understanding of the structure of the needle complex has hampered studies of T3SS function. To estimate the stoichiometry of its components, we measured the mass of its subdomains by scanning transmission electron microscopy (STEM). We determined subunit symmetries by analysis of top and side views within negatively stained samples in low-dose transmission electron microscopy (TEM). Application of 12-fold symmetry allowed generation of a 21-25-A resolution, three-dimensional reconstruction of the needle complex base, revealing many new features and permitting tentative docking of the crystal structure of EscJ, an inner membrane component.

Electron microscopy and image processing: an essential tool for structural analysis of macromolecules

Macromolecular electron microscopy (EM) deals with macromolecular complexes and their placement within the cell-linking the molecular and cellular worlds as a bridge between atomic-resolution X-ray crystallographic or NMR studies and lower resolution light microscopy. The amount of specimen required is typically 10(2) to 10(3) times less than for X-ray crystallography or NMR. Electron micrographs of frozen-hydrated specimens portray native structures. Computer averaging yields enhanced images with reduced noise. Three-dimensional reconstructions may be computed from multiple views. Under favorable circumstances, resolutions of 7 to 10 A are achieved. Fitting atomic-resolution coordinates of components into three-dimensional density maps gives pseudo-atomic models of a complex's structure and interactions. Time-resolved experiments describe conformational changes. Electron tomography allows reconstruction of pleiomorphic complexes and sub-cellular structures. Electron crystallography has produced near-atomic resolution models of two-dimensional arrays, notably of membrane proteins.

Cryo-EM structure of dodecameric Vps4p and its 2:1 complex with Vta1p

The type I AAA (ATPase associated with a variety of cellular activities) ATPase Vps4 and its co-factor Vta1p/LIP5 function in membrane remodeling events that accompany cytokinesis, multivesicular body biogenesis, and retrovirus budding, apparently by driving disassembly and recycling of membrane-associated ESCRT (endosomal sorting complex required for transport)-III complexes. Here, we present electron cryomicroscopy reconstructions of dodecameric yeast Vps4p complexes with and without their microtubule interacting and transport (MIT) N-terminal domains and Vta1p co-factors. The ATPase domains of Vps4p form a bowl-like structure composed of stacked hexameric rings. The two rings adopt dramatically different conformations, with the "upper" ring forming an open assembly that defines the sides of the bowl and the lower ring forming a closed assembly that forms the bottom of the bowl. The N-terminal MIT domains of the upper ring localize on the symmetry axis above the cavity of the bowl, and the binding of six extended Vta1p monomers causes additional density to appear both above and below the bowl. The structures suggest models in which Vps4p MIT and Vta1p domains engage ESCRT-III substrates above the bowl and help transfer them into the bowl to be pumped through the center of the dodecameric assembly.

Macromolecular mass spectrometry and electron microscopy as complementary tools for investigation of the heterogeneity of bacteriophage portal assemblies

The success of electron-cryo microscopy (cryo-EM) and image reconstruction of cyclic oligomers, such as the viral and bacteriophage portals, depends on the accurate knowledge of their order of symmetry. A number of statistical methods of image analysis address this problem, but often do not provide unambiguous results. Direct measurement of the oligomeric state of multisubunit protein assemblies is difficult when the number of subunits is large and one subunit renders only a small increment to the full size of the oligomer. Moreover, when mixtures of different stochiometries are present techniques such as analytical centrifugation or size-exclusion chromatography are also less helpful. Here, we use electrospray ionization mass spectrometry to directly determine the oligomeric states of the in vitro assembled portal oligomers of the phages P22, Phi-29 and SPP1, which range in mass from 430 kDa to about 1 million Da. Our data unambiguously reveal that the oligomeric states of Phi-29 and SPP1 portals were 12 and 13, respectively, in good agreement with crystallographic and electron microscopy data. However, in vitro assembled P22 portals were a mixture of 11- and 12-mer species in an approximate ratio of 2:1, respectively. A subsequent reference-free alignment of electron microscopy images of the P22 portal confirmed this mixture of oligomeric states. We conclude that macromolecular mass spectrometry is a valuable tool in structural biology that can aide in the determination of oligomeric states and symmetry of assemblies, providing a good starting point for improved image analysis of cryo-EM data.

Efficient DNA packaging of bacteriophage PRD1 requires the unique vertex protein P6

The assembly of bacteriophage PRD1 proceeds via formation of empty procapsids containing an internal lipid membrane, into which the linear double-stranded DNA genome is subsequently packaged. The packaging ATPase P9 and other putative packaging proteins have been shown to be located at a unique vertex of the PRD1 capsid. Here, we describe the isolation and characterization of a suppressor-sensitive PRD1 mutant deficient in the unique vertex protein P6. Protein P6 was found to be an essential part of the PRD1 packaging machinery; its absence leads to greatly reduced packaging efficiency. Lack of P6 was not found to affect particle assembly, because in the P6-deficient mutant infection, wild-type (wt) amounts of particles were produced, although most were empty. P6 was determined not to be a specificity factor, as the few filled particles seen in the P6-deficient infection contained only PRD1-specific DNA. The presence of P6 was not necessary for retention of DNA in the capsid once packaging had occurred, and P6-deficient DNA-containing particles were found to be stable and infectious, albeit not as infectious as wt PRD1 virions. A packaging model for bacteriophage PRD1, based on previous results and those obtained in this study, is presented.

Visualization of the herpes simplex virus portal in situ by cryo-electron tomography

Herpes simplex virus type 1 (HSV-1), the prototypical herpesvirus, has an icosahedral nucleocapsid surrounded by a proteinaceous tegument and a lipoprotein envelope. As in tailed bacteriophages, the icosahedral symmetry of the capsid is broken at one of the 12 vertices, which is occupied by a dodecameric ring of portal protein, UL6, instead of a pentamer of the capsid protein, UL19. The portal ring serves as a conduit for DNA entering and exiting the capsid. From a cryo-EM reconstruction of capsids immuno-gold-labeled with anti-UL6 antibodies, we confirmed that UL6 resides at a vertex. To visualize the portal in the context of the assembled capsid, we used cryo-electron tomography to determine the three-dimensional structures of individual A-capsids (empty, mature capsids). The similarity in size and overall shape of the portal and a UL19 pentamer--both are cylinders of approximately 800 kDa--combined with residual noise in the tomograms, prevented us from identifying the portal vertices directly; however, this was accomplished by a computational classification procedure. Averaging the portal-containing subtomograms produced a structure that tallies with the isolated portal, as previously reconstructed by cryo-EM. The portal is mounted on the outer surface of the capsid floor layer, with its narrow end pointing outwards. This disposition differs from that of known phage portals in that the bulk of its mass lies outside, not inside, the floor. This distinction may be indicative of divergence at the level of portal-related functions other than its role as a DNA channel.

Specific short hairpin RNA-mediated inhibition of viral DNA packaging of human cytomegalovirus

To clearly demonstrate the role of the human cytomegalovirus (HCMV) portal protein pUL104 RNA interference was applied. Expressing cell lines were constructed by transduction of shRNAs via the infection with retroviral vectors. After infection of these cells with HCMV AD169 the expression of pUL104 was reduced up to 80% for shRNA S1 and 54% for shRNA S2 at late times of infection compared to controls. In addition, the inhibitory effect was corresponding with a decrease in viral mRNA and plaque formations. Electron microscopic analysis demonstrated that infection of cells expressing pUL104-specific shRNAs resulted in the inhibition of formation of replicative particles.

Structural organization of the needle complex of the type III secretion apparatus of Shigella flexneri

The secretion apparatus known as the needle complex (NC) from the bacterium Shigella flexneri was studied by single particle electron microscopy. The isolated intact NC appears in projection to be composed of a basal body consisting of seven rings and a protruding needle appendage. A comparison of averaged projections of the intact NC and its fragments revealed the organization of the NC into several major subcomplexes. One of these lacks an inner membrane ring of the basal body but still presents the needle appendage attached to four upper rings. The position of the needle appendage within these rings is variable, suggesting that the dissociated component is necessary for stabilizing the needle appendage. Averaged images of the subcomplex lacking the inner membrane basal rings show a thicker extension at the base of the needle appendage, called the socket. This socket was also found to be present in images of the basal body fragment isolated from mutants lacking the mxiH and mxiI genes. This suggests that the socket is not composed of MxiH and MxiI subunits, which form the needle appendage. A symmetry analysis of the basal body top view projections indicated that a peripheral protein component of the inner membrane ring is present in a ring with 24 copies, in contrast to the Salmonella typhimurium NC. A model is presented in which the NC is only associated to the outer- and inner-membranes with its first and seventh ring, respectively.

Changes in bacteriophage T7 virion structure at the initiation of infection

Five proteins are ejected from the bacteriophage T7 virion at the initiation of infection. The three known proteins of the internal core enter the infected cell; all three must both disaggregate from their structure in the mature virion and also almost completely unfold in order to leave the head and pass through the head-tail connector. Two small proteins, the products of genes 6.7 and 7.3, also are ejected from the infecting virion. Gp6.7 and gp7.3 were not previously described as structural virion components, leading to a re-appraisal of the stoichiometry of virion proteins. Gp6.7 is found in tail-less particles and is defined as a head protein, whereas gp7.3 is localized in the tail. Gene 6.7 may be important in morphogenesis; mutants defective in this late gene yield a reduced burst of progeny. Gene 7.3 is essential for virion assembly but, although normally present, its product gp7.3 is not required in a mature particle. Particles assembled in the absence of gp7.3 contain tail fibers but fail to adsorb to cells.

Structure of the connector of bacteriophage T7 at 8A resolution: structural homologies of a basic component of a DNA translocating machinery

The three-dimensional structure of the bacteriophage T7 head-to-tail connector has been obtained at 8A resolution using cryo-electron microscopy and single-particle analysis from purified recombinant connectors. The general morphology of the T7 connector is that of a 12-folded toroidal homopolymer with a channel that runs along the longitudinal axis of the particle. The structure of the T7 connector reveals many structural similarities with the connectors from other bacteriophages. Docking of the atomic structure of the varphi29 connector into the three-dimensional reconstruction of T7 connector reveals that the narrow, distal region of the two oligomers are almost identical. This region of the varphi29 connector has been suggested to be involved in DNA translocation, and is composed of an alpha-beta-alpha-beta-beta-alpha motif. A search for alpha-helices in the same region of the T7 three-dimensional map has located three alpha-helices in approximately the same position as those of the varphi29 connector. A comparison of the predicted secondary structure of several bacteriophage connectors, including among others T7, varphi29, P22 and SPP1, reveals that, despite the lack of sequence homology, they seem to contain the same alpha-beta-alpha-beta-beta-alpha motif as that present in the varphi29 connector. These results allow us to suggest a common architecture related to a basic component of the DNA translocating machinery for several viruses.

Crystallization and initial X-ray diffraction studies of scaffolding protein (gp7) of bacteriophage phi29

The Bacillus subtilis bacteriophage phi29 scaffolding protein (gp7) has been crystallized by the hanging-drop vapour-diffusion method at 293 K. Two new distinct crystal forms that both differed from a previously crystallized and solved scaffolding protein were grown under the same conditions. Form I belongs to the primitive tetragonal space group P4(1)2(1)2, with unit-cell parameters a = b = 77.13, c = 37.12 A. Form II crystals exhibit an orthorhombic crystal form, with space group C222 and unit-cell parameters a = 107.50, b = 107. 80, c = 37.34 A. Complete data sets have been collected to 1.78 and 1.80 A for forms I and II, respectively, at 100 K using Cu Kalpha X-rays from a rotating-anode generator. Calculation of a VM value of 2.46 A3 Da(-1) for form I suggests the presence of one molecule in the asymmetric unit, corresponding to a solvent content of 50.90%, whereas form II has a VM of 4.80 A3 Da(-1) with a solvent content of 48.76% and two molecules in the asymmetric unit. The structures of both crystal forms are being determined by the molecular-replacement method using the coordinates of the published crystal structure of gp7.

ClpA and ClpX ATPases bind simultaneously to opposite ends of ClpP peptidase to form active hybrid complexes

The Escherichia coli ATP-dependent ClpAP and ClpXP proteases are composed of a single proteolytic component, ClpP, complexed with either of the two related chaperones, ClpA or ClpX. ClpXP and ClpAP complexes interact with different specific substrates and catalyze ATP-dependent protein unfolding and degradation. In vitro in the presence of ATP or ATPgammaS, ClpA and ClpX form homomeric rings of six subunits, which bind to one or both ends of the double heptameric rings of ClpP. We have observed that, when equimolar amounts of ClpA and ClpX hexamers are added to ClpP in vitro in the presence of ATP or ATPgammaS, hybrid complexes in which ClpX and ClpA are bound to opposite ends of the same ClpP are readily formed. The distribution of homomeric and heteromeric complexes was consistent with random binding of ClpA and ClpX to the ends of ClpP. Direct demonstration of the functionality of the heteromeric complexes was obtained by electron microscopy, which allowed us to visualize substrate translocation into proteolytically inactive ClpP chambers. Starting with hybrid complexes to which protein substrates specific to ClpX or ClpA were bound, translocation of both types of substrates was shown to occur without significant redistribution of ClpA or ClpX. The stoichiometric ratios of the ClpA, ClpX, and ClpP oligomeric complexes in vivo are consistent with the predominance of heteromeric complexes in growing cells. Thus, ClpXAP is a bifunctional protease whose two ends can independently target different classes of substrates.

EM single particle analysis of the ATP-dependent BchI complex of magnesium chelatase: an AAA+ hexamer

BchI, belonging to the AAA+ -protein family, forms the enzyme magnesium chelatase together with BchD and BchH. This enzyme catalyses the insertion of Mg2+ into protoporphyrin IX upon ATP hydrolysis. Previous studies have indicated that BchI forms ATP-dependent complexes and it is a member of the AAA+ -protein family (ATPases associated with various cellular activities) and it was suggested based on structural homology that the BchI formed hexameric complexes. AAA+ -proteins are Mg2+ -dependent ATPases that normally form oligomeric ring complexes in the presence of ATP. Single particle analysis of fully formed ring complexes of BchI observed by negative staining EM indicate that the BchI has strong 6- and 2-fold rotational symmetries and a weaker 4-fold rotational symmetry which are reminiscent of DNA helicase. A 2D average of the fully formed BchI-ATP ring complex is presented here from images of the complex obtained from negative staining EM. Other complexes are also observed in the EM micrographs and the class averages of these are indicative of the fragility and dynamic nature of the BchI complex which has been reported and they are suggestive of partially circular complexes with six or less protomers per particle. The resolution of the average circular complex is estimated at approximately 30A and it is similar in shape and size to an atomic resolution hexameric model of BchI rendered at 30A.

Structure and polymorphism of the UL6 portal protein of herpes simplex virus type 1

By electron microscopy and image analysis, we find that baculovirus-expressed UL6 is polymorphic, consisting of rings of 11-, 12-, 13-, and 14-fold symmetry. The 12-mer is likely to be the oligomer incorporated into procapsids: at a resolution of 16 A, it has an axial channel, peripheral flanges, and fits snugly into a vacant vertex site. Its architecture resembles those of bacteriophage portal/connector proteins.

Structure of the Neisseria meningitidis Outer Membrane PilQ Secretin Complex at 12 Å Resolution

The bacterial pathogen Neisseria meningitidis expresses long, thin, retractile fibers (called type IV pili) from its cell surface and uses these adhesive structures to mediate primary attachment to epithelial cells during host colonization and invasion. PilQ is an outer membrane protein complex that is essential for the translocation of these pili across the outer membrane. Here, we present the structure of the PilQ complex determined by cryoelectron microscopy to 12 A resolution. The dominant feature of the structure is a large central cavity, formed by four arm features that spiral upwards from a squared ring base and meet to form a prominent cap region. The cavity, running through the center of the complex, is continuous and is effectively sealed at both the top and bottom. Analysis of the complex using self-orientation and by examination of two-dimensional crystals indicates a strong C4 rotational symmetry, with a much weaker C12 rotational symmetry, consistent with PilQ possessing true C4 symmetry with C12 quasi-symmetry. We therefore suggest that the complex is a homododecamer, formed by association of 12 PilQ polypeptide chains into a tetramer of trimers. The structure of the PilQ complex, with its large and well defined central chamber, suggests that it may not function solely as a passive portal in the outer membrane, but could be actively involved in mediating pilus assembly or modification.

Structure of the rotor of the bacterial flagellar motor revealed by electron cryomicroscopy and single-particle image analysis

The FliF ring is the base for self-assembly of the bacterial flagellum and the FliF/FliG ring complex is the core of the rotor of the flagellar motor. We report the structures of these two ring complexes obtained by electron cryomicroscopy and single-particle image analysis at 22A and 25A resolution, respectively. Direct comparison of these structures with the flagellar basal body made by superimposing the density maps on the central section reveals many interesting features, such as how the mechanically stable connection between the ring and the rod is formed, how directly FliF domains are involved in the near axial density of the basal body forming the proximal end of the central channel for a potential gating mechanism, some indication of flexibility in the connection of FliF and FliG, and structural and functional similarities to the head-to-tail connectors of bacteriophages.

Prospects of electron cryotomography to visualize macromolecular complexes inside cellular compartments: implications of crowding

Electron cryotomography has unique potential for three-dimensional visualization of macromolecular complexes at work in their natural environment. This approach is based on reconstructing three-dimensional volumes from tilt series of electron micrographs of cells preserved in their native states by vitrification. Resolutions of 5-8 nm have already been achieved and the prospects for further improvement are good. Since many intracellular activities are conducted by complexes in the megadalton range with dimensions of 20-50 nm, current resolutions should suffice to identify many of them in tomograms. However, residual noise and the dense packing of cellular constituents hamper interpretation. Recently, tomographic data have been collected on vitrified eukaryotic cells (Medalia et al., Science (2002) in press). Their cytoplasm was found to be markedly less crowded than in the prokaryotes previously studied, in accord with differences in crowding between prokaryotic and eukaryotic cells documented by other (indirect) biophysical methods. The implications of this observation are twofold. First, complexes should be more easily identifiable in tomograms of eukaryotic cytoplasm. This applies both to recognizing known complexes and characterizing novel complexes. An example of the latter-a 5-fold symmetric particle is-given. Second, electron cryotomography offers an incisive probe to examine crowding in different cellular compartments.

Structure-function analysis of recombinant substrate protein 22 kDa (SP-22). A mitochondrial 2-CYS peroxiredoxin organized as a decameric toroid

Bovine mitochondrial SP-22 is a member of the peroxiredoxin family of peroxidases. It belongs to the peroxiredoxin 2-Cys subgroup containing three cysteines at positions 47, 66, and 168. The cloning and overexpression in Escherichia coli of recombinant wild type SP-22 and its three cysteine mutants (C47S, C66S, and C168S) are reported. Purified His-tagged SP-22 was fully active with Cys-47 being confirmed as the catalytic residue. The enzyme forms a stable decameric toroid consisting of five basic dimeric units containing intermolecular disulfide bonds linking the catalytically active Cys-47 of one subunit and Cys-168 of the adjacent monomer. The disulfide bonds are not required for overall structural integrity. The toroidal units have average external and internal diameters of 15 and 7 nm, respectively, and can form stacks in a lateral arrangement of two or three rings. C47S had a pronounced tendency to stack in long tubular structures containing up to 60 rings. Further unusual structural features are the presence of radial spikes projecting from the external surface and ordered electron-dense material within the central cavity of the toroid.

A second symmetry mismatch at the portal vertex of bacteriophage T7: 8-fold symmetry in the procapsid core

Like other bacteriophages, T7 has a singular vertex that is the site of a symmetry mismatch involving the portal/connector protein, a 12-fold ring at the vertex site which is also a 5-fold axis for the icosahedral capsid. In the mature virion, a 6-fold-symmetric tail extends outwards from the connector. T7 also has a cylindrical "core" that assembles on the inner surface of the connector during procapsid formation, is retained in the mature virion, and is required for infectivity. We have investigated the core structure by cryo-electron microscopy and image analysis of procapsids and find that it observes 8-fold symmetry. Stoichiometry data indicate that its major constituent is an octamer of gp15.

Variable symmetry in Salmonella typhimurium flagellar motors

Electron cryomicroscopy of rotor complexes of the Salmonella typhimurium flagellar motor, overproduced in a nonmotile Escherichia coli host, has revealed a variation in subunit symmetry of the cytoplasmic ring (C ring) module. C rings with subunit symmetries ranging from 31 to 38 were found. They formed a Gaussian distribution around a mean between 34 and 35, a similar number to that determined for native C rings. C-ring diameter scaled with the number of subunits, indicating that the elliptical-shaped subunits maintained constant intersubunit spacing. Taken together with evidence that the M ring does not correspondingly increase in size, this finding indicates that rotor assembly does not require strict stoichiometric interactions between the M- and C-ring subunits. Implications for motor function are discussed.

Molecular Mechanisms In Bacteriophage T7 Procapsid Assembly, Maturation, And Dna Containment

Bacteriophage T7 is a double-stranded DNA bacteriophage that has attracted particular interest in studies of gene expression and regulation and of morphogenesis, as well as in biotechnological applications of expression vectors and phage display. We report here studies of T7 capsid assembly by cryoelectron microscopy and image analysis. T7 follows the canonical pathway of first forming a procapsid that converts into the mature capsid, but with some novel variations. The procapsid is a round particle with an icosahedral triangulation number of 7 levo, composed of regular pentamers and elongated hexamers. A singular vertex in the procapsid is occupied by the connector/portal protein, which forms 12-fold and 13-fold rings when overexpressed, of which the 12-mer appears to be the assembly-competent form. This vertex is the site of two symmetry mismatches: between the connector and the surrounding five gp 10 hexamers; and between the connector and the 8-fold cylindrical core mounted on its inner surface. The scaffolding protein, gp9, which is required for assembly, forms nubbin-like protrusions underlying the hexamers but not the pentamers, with no contacts between neighboring gp9 monomers. We propose that gp9 facilitates assembly by binding to gp10 hexamers, locking them into a morphogenically correct conformation. gp9 is expelled as the procapsid matures into the larger, thinner walled, polyhedral capsid. Several lines of evidence implicate the connector vertex as the site at which the maturation transformation is initiated: in vivo, maturation appears to be triggered by DNA packaging whereby the signal may involve interaction of the connector with DNA. In the mature T7 head, the DNA is organized as a tightly wound coaxial spool, with the DNA coiled around the core in at least four and perhaps as many as six concentric shells.

Alternating translocation of protein substrates from both ends of ClpXP protease

In ClpXP protease complexes, hexameric rings of the ATP-dependent ClpX chaperone stack on one or both faces of the double-heptameric rings of ClpP. We used electron microscopy to record the initial binding of protein substrates to ClpXP and their accumulation inside proteolytically inactive ClpP. Proteins with N- or C-terminal recognition motifs bound to complexes at the distal surface of ClpX and, upon addition of ATP, were translocated to ClpP. With a partially translocated substrate, the non-translocated portion remained on the surface of ClpX, aligned with the central axis of the complex, confirming that translocation proceeds through the axial channel of ClpXP. Starting with substrate bound on both ends, most complexes translocated substrate from only one end, and rarely (<5%) from both ends. We propose that translocation from one side is favored for two reasons: initiation of translocation is infrequent, making the probability of simultaneous initiation low; and, further, the presence of protein within the cis side translocation channel or within ClpP generates an inhibitory signal blocking translocation from the trans side.

Preliminary crystallographic analysis of the bacteriophage P22 portal protein

Portal proteins are components of large oligomeric dsDNA pumps connecting the icosahedral capsid of tailed bacteriophages to the tail. Prior to the tail attachment, dsDNA is actively pumped through a central cavity formed by the subunits. We have studied the portal protein of bacteriophage P22, which is the largest connector characterized among the tailed bacteriophages. The molecular weight of the monomer is 82.7 kDa, and it spontaneously assembles into an oligomeric structure of approximately 1.0 MDa. Here we present a preliminary biochemical and crystallographic characterization of this large macromolecular complex. The main difficulties related to the crystallization of P22 portal protein lay in the intrinsic dynamic nature of the portal oligomer. Recombinant connectors assembled from portal monomers expressed in Escherichia coli form rings of different stoichiometry in solution, which cannot be separated on the basis of their size. To overcome this intrinsic heterogeneity we devised a biochemical purification that separates different ring populations on the basis of their charge. Small ordered crystals were grown from drops containing a high concentration of the kosmotropic agent tert-butanol and used for data collection. A preliminary crystallographic analysis to 7.0-A resolution revealed that the P22 portal protein crystallized in space group I4 with unit cell dimensions a=b=409.4A, c=260.4A. This unit cell contains a total of eight connectors. Analysis of the noncrystallographic symmetry by the self-rotation function unambiguously confirmed that bacteriophage P22 portal protein is a dodecamer with a periodicity of 30 degrees. The cryo-EM reconstruction of the dodecahedral bacteriophage T3 portal protein will be used as a model to initiate phase extension and structure determination.

Functional proteolytic complexes of the human mitochondrial ATP-dependent protease, hClpXP

Human mitochondrial ClpP (hClpP) and ClpX (hClpX) were separately cloned, and the expressed proteins were purified. Electron microscopy confirmed that hClpP forms heptameric rings and that hClpX forms a hexameric ring. Complexes of a double heptameric ring of hClpP with hexameric hClpX rings bound on each side are stable in the presence of ATP or adenosine 5'-(3-thiotriphosphate) (ATPgammaS), indicating that a symmetry mismatch is a universal feature of Clp proteases. hClpXP displays both ATP-dependent proteolytic activity and ATP- or ATPgammaS-dependent peptidase activity. hClpXP cannot degrade lambdaO protein or GFP-SsrA, specific protein substrates recognized by Escherichia coli (e) ClpXP. However, eClpX interacts with hClpP, and, when examined by electron microscopy, the resulting heterologous complexes are indistinguishable from homologous eClpXP complexes. The hybrid eClpX-hClpP complexes degrade eClpX-specific protein substrates. In contrast, eClpA can neither associate with nor activate hClpP. hClpP has an extra C-terminal extension of 28 amino acids. A mutant lacking this C-terminal extension interacts more tightly with both hClpX and eClpX and shows enhanced enzymatic activities but still does not interact with eClpA. Our results establish that human ClpX and ClpP constitute a bone fide ATP-dependent protease and confirm that substrate selection, which differs between human and E. coli ClpX, is dependent solely on the Clp ATPase. Our data also indicate that human ClpP has conserved sites required for interaction with eClpX but not eClpA, implying that the modes of interaction with ClpP may not be identical for ClpA and ClpX.

Archaeal group II chaperonin mediates protein folding in the cis-cavity without a detachable GroES-like co-chaperonin

Group II chaperonins of archaea and eukaryotes are distinct from group I chaperonins of bacteria. Whereas group I chaperonins require the co-chaperonin Cpn-10 or GroES for protein folding, no co-chaperonin has been known for group II. The protein folding mechanism of group II chaperonins is not yet clear. To understand this mechanism, we examined protein refolding by the recombinant alpha or beta-subunit chaperonin homo-oligomer (alpha16mer and beta16mer) from a hyperthermoplilic archaeum, Thermococcus strain KS-1, using a model substrate, green fluorescent protein (GFP). The alpha16mer and beta16mer captured the non-native GFP and promoted its refolding without any co-chaperonin in an ATP dependent manner. A non-hydrolyzable ATP analog, AMP-PNP, induced the GFP refolding mediated by beta16mer but not by the alpha16mer. A mutant alpha-subunit chaperonin homo-oligomer (trap-alpha) could capture the non-native protein but lacked the ability to refold it. Although trap-alpha suppressed ATP-dependent refolding of GFP mediated by alpha16mer or beta16mer, it did not affect the AMP-PNP-dependent refolding. This indicated that the GFP refolding mediated by beta16mer with AMP-PNP was not accessible to the trap-alpha. Gel filtration chromatography and a protease protection experiment revealed that this refolded GFP, in the presence of AMP-PNP, was associated with beta16mer. After the completion of GFP refolding mediated by beta16mer with AMP-PNP, addition of ATP induced an additional refolding of GFP. Furthermore, the beta16mer preincubated with AMP-PNP showed the ability to capture the non-native GFP. These suggest that AMP-PNP induced one of two chaperonin rings (cis-ring) to close and induced protein refolding in this ring, and that the other ring (trans-ring) could capture the unfolded GFP which was refolded by adding ATP. The present data indicate that, in the group II chaperonin of Thermococcus strain KS-1, the protein folding proceeds in its cis-ring in an ATP-dependent fashion without any co-chaperonin.

The Sm-like Hfq protein increases OxyS RNA interaction with target mRNAs

The Escherichia coli host factor I, Hfq, binds to many small regulatory RNAs and is required for OxyS RNA repression of fhlA and rpoS mRNA translation. Here we report that Hfq is a bacterial homolog of the Sm and Sm-like proteins integral to RNA processing and mRNA degradation complexes in eukaryotic cells. Hfq exhibits the hallmark features of Sm and Sm-like proteins: the Sm1 sequence motif, a multisubunit ring structure (in this case a homomeric hexamer), and preferential binding to polyU. We also show that Hfq increases the OxyS RNA interaction with its target messages and propose that the enhancement of RNA-RNA pairing may be a general function of Hfq, Sm, and Sm-like proteins.

Functional domains of the ClpA and ClpX molecular chaperones identified by limited proteolysis and deletion analysis

Escherichia coli ClpA and ClpX are ATP-dependent protein unfoldases that each interact with the protease, ClpP, to promote specific protein degradation. We have used limited proteolysis and deletion analysis to probe the conformations of ClpA and ClpX and their interactions with ClpP and substrates. ATP gamma S binding stabilized ClpA and ClpX such that that cleavage by lysylendopeptidase C occurred at only two sites. Both proteins were cleaved within in a loop preceding an alpha-helix-rich C-terminal domain. Although the loop varies in size and composition in Clp ATPases, cleavage occurred within and around a conserved triad, IG(F/L). Binding of ClpP blocked this cleavage, and prior cleavage at this site rendered both ClpA and ClpX defective in binding and activating ClpP, suggesting that this site is involved in interactions with ClpP. ClpA was also cut at a site near the junction of the two ATPase domains, whereas the second cleavage site in ClpX lay between its N-terminal and ATPase domains. ClpP did not block cleavage at these other sites. The N-terminal domain of ClpX dissociated upon cleavage, and the remaining ClpXDeltaN remained as a hexamer, associated with ClpP, and expressed ATPase, chaperone, and proteolytic activity. A truncated mutant of ClpA lacking its N-terminal 153 amino acids also formed a hexamer, associated with ClpP, and expressed these activities. We propose that the N-terminal domains of ClpX and ClpA lie on the outside ring surface of the holoenzyme complexes where they contribute to substrate binding or perform a gating function affecting substrate access to other binding sites and that a loop on the opposite face of the ATPase rings stabilizes interactions with ClpP and is involved in promoting ClpP proteolytic activity.

Structural organisation of the head-to-tail interface of a bacterial virus

In tailed icosahedral bacteriophages the connection between the 5-fold symmetric environment of the portal vertex in the capsid and the 6-fold symmetric phage tail is formed by a complex interface structure. The current study provides the detailed analysis of the assembly and structural organisation of such an interface within a phage having a long tail. The region of the interface assembled as part of the viral capsid (connector) was purified from DNA-filled capsids of the Bacillus subtilis bacteriophage SPP1. It is composed of oligomers of gp6, the SPP1 portal protein, of gp15, and of gp16. The SPP1 connector structure is formed by a mushroom-like portal protein whose cap faces the interior of the viral capsid in intact virions, an annular structure below the stem of the mushroom, and a second narrower annulus that is in direct contact with the helical tail extremity. The layered arrangement correlates to the stacking of gp6, gp15, and gp16 on top of the tail. The gp16 ring is exposed to the virion outside. During SPP1 morphogenesis, gp6 participates in the procapsid assembly reaction, an early step in the assembly pathway, while gp15 and gp16 bind to the capsid portal vertex after viral chromosome encapsidation. gp16 is processed during or after tail attachment to the connector region. The portal protein gp6 has 12-fold cyclical symmetry in the connector structure, whereas assembly-naïve gp6 exhibits 13-fold symmetry. We propose that it is the interaction of gp6 with other viral morphogenetic proteins that drives its assembly into the 12-mer state.

Structural transformations accompanying the assembly of bacteriophage P22 portal protein rings in vitro

The Salmonella typhimurium bacteriophage P22 assembles an icosahedral capsid precursor called a procapsid. The oligomeric portal protein ring, located at one vertex, comprises the conduit for DNA entry and exit. In conjunction with the DNA packaging enzymes, the portal ring is an integral component of a nanoscale machine that pumps DNA into the phage head. Although the portal vertex is assembled with high fidelity, the mechanism by which a single portal complex is incorporated during procapsid assembly remains unknown. The assembly of bacteriophage P22 portal rings has been characterized in vitro using a recombinant, His-tagged protein. Although the portal protein remained primarily unassembled within the cell, once purified, the highly soluble monomer assembled into rings at room temperature at high concentrations with a half time of approximately 1 h. Circular dichroic analysis of the monomers and rings indicated that the protein gained alpha-helicity upon polymerization. Thermal denaturation studies suggested that the rings contained an ordered domain that was not present in the unassembled monomer. A combination of 4,4'-dianilino-1,1'-binapthyl-5,5'-disulfonic acid (bis-ANS) binding fluorescence studies and limited proteolysis revealed that the N-terminal portion of the unassembled subunit is meta-stable and is susceptible to structural perturbation by bis-ANS. In conjunction with previously obtained data on the behavior of the P22 portal protein, we propose an assembly model for P22 portal rings that involves a meta-stable monomeric subunit.

A major conformational change in p97 AAA ATPase upon ATP binding

AAA ATPases play central roles in cellular activities. The ATPase p97, a prototype of this superfamily, participates in organelle membrane fusion. Cryoelectron microscopy and single-particle analysis revealed that a major conformational change of p97 during the ATPase cycle occurred upon nucleotide binding and not during hydrolysis as previously hypothesized. Furthermore, our study indicates that six p47 adaptor molecules bind to the periphery of the ring-shaped p97 hexamer. Taken together, these results provide a revised model of how this and possibly other AAA ATPases can translate nucleotide binding into conformational changes of associated binding partners.

Visualization of substrate binding and translocation by the ATP-dependent protease, ClpXP

Binding and internalization of a protein substrate by E. coli ClpXP was investigated by electron microscopy. In sideviews of ATP gamma S-stabilized ClpXP complexes, a narrow axial channel was visible in ClpX, surrounded by protrusions on its distal surface. When substrate lambda O protein was added, extra density attached to this surface. Upon addition of ATP, this density disappeared as lambda O was degraded. When ATP was added to proteolytically inactive ClpXP-lambda O complexes, the extra density transferred to the center of ClpP and remained inside ClpP after separation from ClpX. We propose that substrates of ATP-dependent proteases bind to specific sites on the distal surface of the ATPase, and are subsequently unfolded and translocated into the internal chamber of the protease.

Structural analysis of the bacteriophage T3 head-to-tail connector

The connector protein of bacteriophage T3, p8, has been overexpressed in Escherichia coli. Purification of the oligomers built by several copies of p8 reveals a mixed population of dodecamers and tridecamers. The percentages of these two types of oligomers differ in every culture growth, indicating that assembly of this protein depends upon the conditions of the expression system. Those cultures that generated a majority of dodecamers allowed, after purification of the connectors, the two-dimensional crystallization of the dodecamers in a tetragonal arrangement, while the tridecamers did not form crystals. The processing and averaging of several images of frozen-hydrated crystals and their internal phase comparison shows that the crystals are arranged in a P42(1)2 space group, with cell unit dimensions of 165 x 165 A. The three-dimensional reconstruction generated with images of crystals ranging from 0 degrees to 60 degrees tilt reveals a wide domain surrounded by 12 protrusions and a narrow domain that serves to interact with the tail of the bacteriophage. A channel runs along the connector wide enough to allow the translocation of a double-stranded DNA molecule into the prohead. The general structure of the T3 connector is very similar to those obtained for other nonrelated bacteriophages and strongly suggests that the shape of this important viral structure is intimately related to its function.

HIV-1 rev depolymerizes microtubules to form stable bilayered rings

We describe a novel interaction between HIV-1 Rev and microtubules (MTs) that results in the formation of bilayered rings that are 44-49 nm in external diameter, 3.4-4.2 MD (megadaltons) in mass, and have 28-, 30-, or 32-fold symmetry. Ring formation is not sensitive to taxol, colchicine, or microtubule-associated proteins, but requires Mg(2+) and is inhibited by maytansine. The interaction involves the NH(2)-terminal domain of Rev and the face of tubulin exposed on the exterior of the MTs. The NH(2)-terminal half of Rev has unexpected sequence similarity to the tubulin-binding portion of the catalytic/motor domains of the microtubule-destabilizing Kin I kinesins. We propose a model wherein binding of Rev dimers to MTs at their ends causes segments of two neighboring protofilaments to peel off and close into rings, circumferentially containing 14, 15, or 16 tubulin heterodimers, with Rev bound on the inside. Rev has a strong inhibitory effect on aster formation in Xenopus egg extracts, demonstrating that it can interact with tubulin in the presence of normal levels of cellular constituents. These results suggest that Rev may interact with MTs to induce their destabilization, a proposition consistent with the previously described disruption of MTs after HIV-1 infection.

Role of the Gp16 lytic transglycosylase motif in bacteriophage T7 virions at the initiation of infection

The predicted catalytic glutamate residue for transglycosylase activity of bacteriophage T7 gp16 is not essential for phage growth, but is shown to be beneficial during infection of Escherichia coli cells grown to high cell density, conditions in which murein is more highly cross-linked. In the absence of the putative transglycosylase, internalization of the phage genome is significantly delayed during infection. The lytic transglycosylase motif of gp16 is essential for phage growth at temperatures below 20 degrees C, indicating that these growth conditions also lead to increased cross-linking of peptidoglycan. Overexpression of sltY, E. coli soluble lytic transglycosylase, partially complements the defect in infection of mutant phage particles, allowing them to infect at higher efficiencies. Conversely, an sltY deletion increases the latent period of wild-type phage.

Mapping and fuzzy classification of macromolecular images using self-organizing neural networks

In this work the effectiveness of the fuzzy kohonen clustering network (FKCN) in the unsupervised classification of electron microscopic images of biological macromolecules is studied. The algorithm combines Kohonen's self-organizing feature maps (SOFM) and Fuzzy c-means (FCM) in order to obtain a powerful clustering technique with the best properties inherited from both. Exploratory data analysis using SOFM is also presented as a step previous to final clustering. Two different data sets obtained from the G40P helicase from B. Subtilis bacteriophage SPP1 have been used for testing the proposed method, one composed of 2458 rotational power spectra of individual images and the other composed by 338 images from the same macromolecule. Results of FKCN are compared with self-organizing feature maps (SOFM) and manual classification. Experimental results prove that this new technique is suitable for working with large, high-dimensional and noisy data sets and, thus, it is proposed to be used as a classification tool in electron microscopy.