Nucleotide sequence of the FokI restriction-modification system: separate strand-specificity domains in the methyltransferase

An alternative approach to study the enzymatic specificities of the CfrBI restriction-modification system

Restriction–modification systems (RMS) are the main gene-engineering tools and a suitable model to study the molecular mechanisms of catalysis and DNA–protein interactions. Research into the catalytic properties of these enzymes, determination of hydrolysis and DNA-methylation sites remain topical. In our previous work we have cloned and sequenced the CfrBI restriction–modification system (strain Citrobacter freundii), which recognizes the nucleotide sequence 5′-CCWWGG-3′.

In this article we describe the cloning of the methyltransferase and restriction endonuclease genes (gene encoding CfrBI DNA methyltransferase (cfrBIM) and gene encoding CfrBI restriction endonuclease (cfrBIR)) separately to obtain strains overproducing the enzymes of this system. His₆-CfrBI, which had been purified to homogeneity, was used to establish the DNA-hydrolysis point in its recognition site. CfrBI was shown to cleave DNA after just the first 5′C within the recognition site and then to generate 4-nt 3′ cohesive ends (5′-C/CWWGG-3′).

To map the site of methylation by M.CfrBI, we exploited the fact that the CfrBI site partially overlaps with the recognition sites of the well-documented enzymes KpnI and ApaI. The M.CfrBI- induced hemimethylation of the internal C residue of the ApaI recognition sequence (GGGC^N4mCC) was observed to block cleavage by ApaI. In contrast, KpnI was able to digest its M.CfrBI-hemimethylated site (GGTA^N4mCC).

KpnI was used to restrict a fragment of DNA harbouring the CfrBI and KpnI sites, in which the CfrBI site was methylated in vitro by His₆-M.CfrBI using [³H]-SAM.

The subsequent separation of hydrolysis products by electrophoresis and the enumeration of incorporated [H3]-methyl groups in each of the fragments made it possible to determine that external cytosine undergoes modification in the recognition site.

Isospecific adenine DNA methyltransferases show distinct preferences towards DNA substrates

Here, we report results on systematic analysis of DNA substrate preferences of three N6-adenine β-class DNA methyltransferases that are part of the type II restriction-modification systems. The studied enzymes were: M.EcoVIII, M.HindIII and M.LlaCI, which although found in phylogenetically distant bacteria (γ-proteobacteria and low-GC Gram-positive bacteria), recognize the same palindromic specific sequence 5′-AAGCTT-3′ and catalyze formation of N6-methyladenine at the first A-residue. As expected overall the enzymes share the most analyzed features, but they show also some distinct differences in substrate recognition. Therefore DNA methylation reactions were carried out not only under standard, but also under relaxed conditions using DMSO or glycerol. We found that all of these enzymes preferred DNA containing a hemimethylated target site, but differ in modification of ssDNA, especially more pronounced for M.EcoVIII under relaxed conditions. In these conditions they also have shown varied preferences toward secondary sites, which differ by one nucleotide from specific sequence. They preferred sequences with substitutions at the 1^st (A¹ → G/C) and at the 2^nd position (A² → C), while sites with substitutions at the 3^rd position (G³ → A/C) were modified less efficiently. Kinetic parameters of the methylation reaction carried out by M.EcoVIII were determined. Methylation efficiency (k_cat/K_m) of secondary sites was 4.5–10 times lower when compared to the unmethylated specific sequences, whilst efficiency observed for the hemimethylated substrate was almost 4.5 times greater. We also observed a distinct effect of analyzed enzymes on unspecific interaction with DNA phosphate backbone. We concluded that for all three enzymes the most critical is the phosphodiester bond between G³-C⁴ nucleotides at the center of the target site.

Origins of Programmable Nucleases for Genome Engineering

Genome engineering with programmable nucleases depends on cellular responses to a targeted double-strand break (DSB). The first truly targetable reagents were the zinc finger nucleases (ZFNs) showing that arbitrary DNA sequences could be addressed for cleavage by protein engineering, ushering in the breakthrough in genome manipulation. ZFNs resulted from basic research on zinc finger proteins and the FokI restriction enzyme (which revealed a bipartite structure with a separable DNA-binding domain and a non-specific cleavage domain). Studies on the mechanism of cleavage by 3-finger ZFNs established that the preferred substrates were paired binding sites, which doubled the size of the target sequence recognition from 9 to 18bp, long enough to specify a unique genomic locus in plant and mammalian cells. Soon afterwards, a ZFN-induced DSB was shown to stimulate homologous recombination in cells. Transcription activator-like effector nucleases (TALENs) that are based on bacterial TALEs fused to the FokI cleavage domain expanded this capability. The fact that ZFNs and TALENs have been used for genome modification of more than 40 different organisms and cell types attests to the success of protein engineering. The most recent technology platform for delivering a targeted DSB to cellular genomes is that of the RNA-guided nucleases, which are based on the naturally occurring Type II prokaryotic CRISPR-Cas9 system. Unlike ZFNs and TALENs that use protein motifs for DNA sequence recognition, CRISPR-Cas9 depends on RNA-DNA recognition. The advantages of the CRISPR-Cas9 system-the ease of RNA design for new targets and the dependence on a single, constant Cas9 protein-have led to its wide adoption by research laboratories around the world. These technology platforms have equipped scientists with an unprecedented ability to modify cells and organisms almost at will, with wide-ranging implications across biology and medicine. However, these nucleases have also been shown to cut at off-target sites with mutagenic consequences. Therefore, issues such as efficacy, specificity and delivery are likely to drive selection of reagents for particular purposes. Human therapeutic applications of these technologies will ultimately depend on risk versus benefit analysis and informed consent.

Type II restriction endonucleases--a historical perspective and more

This article continues the series of Surveys and Summaries on restriction endonucleases (REases) begun this year in Nucleic Acids Research. Here we discuss 'Type II' REases, the kind used for DNA analysis and cloning. We focus on their biochemistry: what they are, what they do, and how they do it. Type II REases are produced by prokaryotes to combat bacteriophages. With extreme accuracy, each recognizes a particular sequence in double-stranded DNA and cleaves at a fixed position within or nearby. The discoveries of these enzymes in the 1970s, and of the uses to which they could be put, have since impacted every corner of the life sciences. They became the enabling tools of molecular biology, genetics and biotechnology, and made analysis at the most fundamental levels routine. Hundreds of different REases have been discovered and are available commercially. Their genes have been cloned, sequenced and overexpressed. Most have been characterized to some extent, but few have been studied in depth. Here, we describe the original discoveries in this field, and the properties of the first Type II REases investigated. We discuss the mechanisms of sequence recognition and catalysis, and the varied oligomeric modes in which Type II REases act. We describe the surprising heterogeneity revealed by comparisons of their sequences and structures.

[Progress in zinc finger nuclease engineering for targeted genome modification]

Zinc finger nuclease (ZFN) is an artificially engineered hybrid protein that contains a zinc finger protein (ZFP) domain and a Fok I endonuclease cleavage domain. It has recently emerged as a powerful molecular tool for targeted genome modifications. ZFNs recognize and bind to specific DNA sequences to generate a double-strand break (DSB) by its nuclease activity. Based on this finding, various genetic methods, including gene targeting (gene disruption), gene addition, gene correction etc., are being designed to manipulate the genomes of different species at specific loci. One particular advantage of this new technique is its broad applications, which can be employed to generate desirable inheritable mutations both at the organismal level and at the cellular level. Here, we review the recent progress and prospects of ZFN technology. This article focused on the mechanism of how it works, currently available target assessment, ZFP library construction and screening methods, target modification strategies, as well as a collection of specie and genes that have been successfully modified by ZFN. This review will provide a useful reference for researchers who are interested in applying this new technique in their studies.

Zinc finger nuclease-mediated transgene deletion

A transgene, flanked by zinc finger nuclease (ZFN) cleavage sites, was deleted from a stably transformed plant by crossing it with a second plant expressing a corresponding ZFN gene. A target construct, containing a GUS reporter gene flanked by ZFN cleavage sites, a GFP reporter gene and a PAT selectable marker gene, was transformed into tobacco. Basta-resistant plants were regenerated and screened for GUS and GFP expression. A second construct, containing a ZFN gene driven by the constitutive CsVMV promoter and an HPT selectable marker gene, was also transformed into tobacco. Selected T(0) plants were grown to maturity and allowed to self-pollinate. Homozygous target plants, which expressed GUS and GFP, were crossed with homozygous ZFN plants, which expressed the ZFN gene. Numerous GUS-negative plants were observed among the hybrids with one particular cross displaying approximately 35% GUS-negative plants. Evidence for complete deletion of a 4.3 kb sequence comprising the GUS gene was obtained and sequence confirmed. Co-segregation in F(2) progenies of 'truncated' and 'intact' target sequences with expected reporter gene phenotypes were observed. Since ZFNs can be designed to bind and cleave a wide range of DNA sequences, these results constitute a general strategy for creating targeted gene deletions.

Diversity of DNA methyltransferases that recognize asymmetric target sequences

DNA methyltransferases (MTases) are a group of enzymes that catalyze the methyl group transfer from S-adenosyl-L-methionine in a sequence-specific manner. Orthodox Type II DNA MTases usually recognize palindromic DNA sequences and add a methyl group to the target base (either adenine or cytosine) on both strands. However, there are a number of MTases that recognize asymmetric target sequences and differ in their subunit organization. In a bacterial cell, after each round of replication, the substrate for any MTase is hemimethylated DNA, and it therefore needs only a single methylation event to restore the fully methylated state. This is in consistent with the fact that most of the DNA MTases studied exist as monomers in solution. Multiple lines of evidence suggest that some DNA MTases function as dimers. Further, functional analysis of many restriction-modification systems showed the presence of more than one or fused MTase genes. It was proposed that presence of two MTases responsible for the recognition and methylation of asymmetric sequences would protect the nascent strands generated during DNA replication from cognate restriction endonuclease. In this review, MTases recognizing asymmetric sequences have been grouped into different subgroups based on their unique properties. Detailed characterization of these unusual MTases would help in better understanding of their specific biological roles and mechanisms of action. The rapid progress made by the genome sequencing of bacteria and archaea may accelerate the identification and study of species- and strain-specific MTases of host-adapted bacteria and their roles in pathogenic mechanisms.

Bioinformatic and partial functional analysis of pEspA and pEspB, two plasmids from Exiguobacterium arabatum sp. nov. RFL1109

The complete nucleotide sequences of two plasmids from Exiguobacterium arabatum sp. nov. RFL1109, pEspA (4563bp) and pEspB (38,945bp), have been determined. Five ORFs were identified in the pEspA plasmid, and putative functions were assigned to two of them. Using deletion mapping approach, the Rep-independent replication region of pEspA, which functions in Bacillus subtilis, was localized within a 0.6kb DNA region. Analysis of the pEspB sequence revealed 42 ORFs. From these, function of two genes encoding enzymes of the Lsp1109I restriction-modification system was confirmed experimentally, while putative functions of another 18 ORFs were suggested based on comparative analysis. Three functional regions have been proposed for the pEspB plasmid: the putative conjugative transfer region, the region involved in plasmid replication and maintenance, and the region responsible for transposition of the IS21 family-like transposable elements.

Targeting DNA 5mCpG sites with chimeric endonucleases

Cytosine modification of the dinucleotide CpG in the DNA regulatory region is an important epigenetic marker during early embryo development, cellular differentiation, and cancer progression. In clinical settings, such as anti-cancer drug treatment, it is desirable to develop research tools to characterize DNA sequences affected by epigenetic perturbations. Here, we describe the construction and characterization of two fusion endonucleases consisting of the (5)mCpG-binding domain of human MeCP2 (hMeCP2) and the cleavage domains of BmrI and FokI restriction endonucleases (REases). The chimeric (CH) endonucleases cleave M.HpaII (C(5)mCGG)-and M.SssI ((5)mCpG)-modified DNA. Unmodified DNA and M.MspI-modified DNA ((5)mCCGG) are poor substrates for the CH-endonucleases. Sequencing cleavage products of modified lambda DNA indicates that cleavage takes place outside the (5)mCpG recognition sequence, predominantly 4-17 bp upstream of the modified base (/N(4-17)(5)mCpG, where / indicates the cleavage site). Such (5)mCpG-specific endonucleases will be useful to study CpG island modification of the regulatory regions of tumor suppressor genes, and for the construction of cell-specific and tumor-specific modified CpG island databases.

A nomenclature for restriction enzymes, DNA methyltransferases, homing endonucleases and their genes

A nomenclature is described for restriction endonucleases, DNA methyltransferases, homing endonucleases and related genes and gene products. It provides explicit categories for the many different Type II enzymes now identified and provides a system for naming the putative genes found by sequence analysis of microbial genomes.

Selection for mutants improving expression of an anti-MAP kinase monoclonal antibody by filamentous phage display

It has recently been reported that single amino acid residues can strongly influence the expression of recombinant antibody fragments in Escherichia coli. Prediction of these critical positions can be difficult even with prior knowledge of the primary sequence and the three-dimensional folded structure of the antibody. To circumvent this, a Fab phage display library containing random point mutations was generated from a hybridoma specific for activated p44/p42 mitogen-activated protein (MAP) kinases. Clones that express Fab were selected by panning against the target antigen. It was found that a cysteine-to-serine substitution at position 91 in the CDR3 of the light chain was responsible for allowing expression of Fab. Site-directed mutagenesis was performed to effect this substitution and others at cysteine 91 on a nonexpressing clone. Mutants containing serine, glycine or alanine at position 91 expressed Fab and bound to target antigen. In contrast, tyrosine mutants had moderate Fab expression but no detectable binding to antigen. These results demonstrate that by using phage display, one can select for the expression of antibody fragments while retaining biological activity.

Circular permutation of DNA cytosine-N4 methyltransferases: in vivo coexistence in the BcnI system and in vitro probing by hybrid formation

Sequence analysis of the BcnI restriction-modification system from Bacillus centrosporus revealed four open reading frames (bcnIC, bcnIR, bcnIB and bcnIA) that are arranged as two converging collinear pairs. One pair encodes a putative small regulatory protein, C.BcnI, and the restriction endonuclease R.BcnI. The other two gene products are the DNA cytosine-N4 methyltransferases M.BcnIA and M.BcnIB, which differ by circular permutation of conserved sequence motifs. The BcnI methyltransferases are isospecific on double-stranded DNA [methylation specificity CC(C/G)GG], but M.BcnIA can also methylate the target sites in single-stranded DNA. Functional analysis shows that bcnIA is dispensable (bcnIB is capable of protecting the DNA against the in vivo activity of bcnIR); in contrast, no stable clones were obtained if bcnIB alone was deleted from the system. By analogy with the DpnII system, the second methylase M.BcnIA may play a role in the transformation proficiency of its gram-positive host. The interchangeability of homologous elements in the beta class of cytosine-N4 methylases was probed by hybrid formation between M.BcnIB and its closest homolog M.Cfr9I (CCCGGG) employing a novel semi-random strategy combined with selection for catalytic activity. The fusion points in the active hybrids mapped in a narrow region located between sequence motifs X and I. Our data illustrate that recombination of two related sequences by circular permutation may serve as an evolutionary mechanism for creating new specificities of amino MTases.

Characterization of BseMII, a new type IV restriction-modification system, which recognizes the pentanucleotide sequence 5'-CTCAG(N)(10/8)/

We report the properties of the new BseMII restriction and modification enzymes from Bacillus stearothermophilus Isl 15-111, which recognize the 5'-CTCAG sequence, and the nucleotide sequence of the genes encoding them. The restriction endonuclease R.BseMII makes a staggered cut at the tenth base pair downstream of the recognition sequence on the upper strand, producing a two base 3'-protruding end. Magnesium ions and S:-adenosyl-L-methionine (AdoMet) are required for cleavage. S:-adenosylhomocysteine and sinefungin can replace AdoMet in the cleavage reaction. The BseMII methyltransferase modifies unique adenine residues in both strands of the target sequence 5'-CTCAG-3'/5'-CTGAG-3'. Monomeric R.BseMII in addition to endonucleolytic activity also possesses methyltransferase activity that modifies the A base only within the 5'-CTCAG strand of the target duplex. The deduced amino acid sequence of the restriction endonuclease contains conserved motifs of DNA N6-adenine methylases involved in S-adenosyl-L-methionine binding and catalysis. According to its structure and enzymatic properties, R.BseMII may be regarded as a representative of the type IV restriction endonucleases.

Specificities of eleven different DNA methyltransferases of Helicobacter pylori strain 26695

Methyltransferases (MTases) of procaryotes affect general cellular processes such as mismatch repair, regulation of transcription, replication, and transposition, and in some cases may be essential for viability. As components of restriction-modification systems, they contribute to bacterial genetic diversity. The genome of Helicobacter pylori strain 26695 contains 25 open reading frames encoding putative DNA MTases. To assess which MTase genes are active, strain 26695 genomic DNA was tested for cleavage by 147 restriction endonucleases; 24 were found that did not cleave this DNA. The specificities of 11 expressed MTases and the genes encoding them were identified from this restriction data, combined with the known sensitivities of restriction endonucleases to specific DNA modification, homology searches, gene cloning and genomic mapping of the methylated bases m(4)C, m(5)C, and m(6)A.

DNA methylation at the CfrBI site is involved in expression control in the CfrBI restriction-modification system

We have previously found that genes of the CFR:BI restriction-modification (R-M) system from Citrobacter freundii are oriented divergently and that their promoter regions overlap. The overlapping promoters suggest regulation of gene expression at the transcriptional level. In this study the transcription regulation of CFR:BI R-M genes was analyzed in vivo and in vitro in Escherichia coli. It was shown that in the presence of CFR:BI methyltransferase (M.CFR:BI), cell galactokinase activity decreases 10-fold when the galactokinase gene (galK) is under the control of the cfrBIM promoter and increases 20-fold when galK is under the control of the cfrBIR promoter. The CFR:BI site, proven to be unique for the entire CFR:BI R-M gene sequence, is located in the -35 cfrBIM promoter region and is in close vicinity of the -10 cfrBIR promoter region. A comparison of the cfrBIM and the cfrBIR promoter activities in the in vitro transcription system using methylated and unmethylated DNA fragments as templates demonstrated that the efficiency of CFR:BI R-M gene transcription is regulated by enzymatic modification at the N-4-position of cytosine bases of the CFR:BI site by M.CFR:BI. From the results of the in vivo and in vitro experiments we suggest a new model of gene expression regulation in type II R-M systems.

Specificity of DNA binding and methylation by the M.FokI DNA methyltransferase

The M.FokI adenine-N(6) DNA methyltransferase recognizes the asymmetric DNA sequence GGATG/CATCC. It consists of two domains each containing all motifs characteristic for adenine-N(6) DNA methyltransferases. We have studied the specificity of DNA-methylation by both domains using 27 hemimethylated oligonucleotide substrates containing recognition sites which differ in one or two base pairs from GGATG or CATCC. The N-terminal domain of M.FokI interacts very specifically with GGATG-sequences, because only one of the altered sites is modified. In contrast, the C-terminal domain shows lower specificity. It prefers CATCC-sequences but only two of the 12 star sites (i.e. sites that differ in 1 bp from the recognition site) are not accepted and some star sites are modified with rates reduced only 2-3-fold. In addition, GGATGC- and CGATGC-sites are modified which differ at two positions from CATCC. DNA binding experiments show that the N-terminal domain preferentially binds to hemimethylated GGATG/C(m)ATCC sequences whereas the C-terminal domain binds to DNA with higher affinity but without specificity. Protein-protein interaction assays show that both domains of M.FokI are in contact with each other. However, several DNA-binding experiments demonstrate that DNA-binding of both domains is mutually exclusive in full-length M.FokI and both domains do not functionally influence each other. The implications of these results on the molecular evolution of type IIS restriction/modification systems are discussed.

Homology modelling of the DNA 5mC methyltransferase M.BssHII. Is permutation of functional subdomains common to all subfamilies of DNA methyltransferases?

This work presents a full tertiary model of the M.BssHII methyltransferase (MTase) complexed with substrate DNA and cofactor S-adenosyl-L-methionine, built by homology modelling based on previously solved complete structures of DNA MTases M.HaeIII and M. HhaI. M.BssHII and the template proteins show high sequence similarity, which indicates that they are evolutionary related. However, they are topologically different: M.BssHII is a circularly permuted variant of template MTases (Xu et al. Nucleic Acids Res 1997;25:3991). The model developed in this work will be a good starting point and valuable help in designing mutagenesis experiments to better understand the biological function of methyltransferases and the process of domain swapping.

The efficiency of Escherichia coli selenocysteine insertion is influenced by the immediate downstream nucleotide

Selenocysteine (Sec) incorporation requires the TGA opal codon and a downstream Sec insertion sequence (SECIS), which can be partially randomized and cloned into M13 pIII fusion constructs for phage display. This combinatorial approach provides a convenient non-radioactive assay that couples phage production to opal suppression. Two SECIS libraries were prepared, with the immediate downstream nucleotide either randomized (TGAN) or fixed as thymidine (TGAT). The TGAN library resulted in a majority of clones with a downstream purine and selenium-independent phage production, implicating the endo-genous tryptophan-inserting opal suppression pathway. Although the addition of sodium selenite to the growth medium did not affect phage production, it did increase the level of Sec insertion, as shown by the chemical reactivity of the resulting phage. The TGAT phage library yielded clones with strictly selenium-dependent phage production and reactivity consistent with the presence of Sec. These clones were prone to spontaneous mutation upon further propagation, however, resulting in loss of the selenium-dependent phenotype. We conclude that the immediate downstream nucleotide determines whether the endogenous opal suppression pathway competes with co-translational Sec insertion.

The FokI methyltransferase from Flavobacterium okeanokoites. Purification and characterization of the enzyme and its truncated derivatives

The gene encoding the FokI methyltransferase from Flavobacterium okeanokoites was cloned into an Escherichia coli vector. The transcriptional start sites were mapped as well as putative -10 and -35 regions of the fokIM promoter. Enzyme overproduction was ensured by cloning the fokIM gene under the phi 10 promoter of phase T7. M.FokI was purified using a two-step chromatography procedure. M.FokI is a monomeric protein with a M(r) = 76,000 +/- 1,500 under denaturing conditions. It contains 21 Arg residues, and at least one of which is required for activity as shown by inhibition using 2,3-butanedione. Deletion mutants in the N- and C-terminus of M.FokI were isolated and characterized. The N-terminal derivative (M.FokIN) methylates the adenine residue within the sequence 5'-GGATG-3', whereas the C-terminal derivative (M.FokIC) modifies the adenine residue within the sequence 5'-CATCC-3'. Substrate-protection studies, utilizing chemical modification combined with data on the effect of divalent cations and pH on methylation activity, proved the existence of two catalytic centers within the FokI methyltransferase molecule. M.FokI and its truncated derivatives require S-adenosyl-L-methionine as the methyl-group donor, and they are strongly inhibited by divalent cations (Mg2+, Ca2+, Ba2+, Mn2+, and Zn2+) and S-adenosyl-L-homocysteine. The Km values for the methyl donor, S-adenosyl-L-methionine are 0.6 microM (M.FokI), 0.4 microM (M.FokIN), and 0.9 microM (M.FokIC) while the Km values for substrate lambda DNA are 1.2 nM (M.FokI), 1.4 nM (M.FokIN), and 1.3 nM (M.FokIC).

On the substrate specificity of DNA methyltransferases. adenine-N6 DNA methyltransferases also modify cytosine residues at position N4

Methylation of DNA is important in many organisms and essential in mammals. Nucleobases can be methylated at the adenine-N6, cytosine-N4, or cytosine-C5 atoms by specific DNA methyltransferases. We show here that the M.EcoRV, M.EcoRI, and Escherichia coli dam methyltransferases as well as the N- and C-terminal domains of the M. FokI enzyme, which were formerly all classified as adenine-N6 DNA methyltransferases, also methylate cytosine residues at position N4. Kinetic analyses demonstrate that the rate of methylation of cytosine residues by M.EcoRV and the M.FokI enzymes is reduced by only 1-2 orders of magnitude in relation to methylation of adenines. This result shows that although these enzymes methylate DNA in a sequence specific manner, they have a low substrate specificity with respect to the target base. This unexpected finding has implications on the mechanism of adenine-N6 DNA methyltransferases. Sequence comparisons suggest that adenine-N6 and cytosine-N4 methyltransferases have changed their reaction specificity at least twice during evolution, a model that becomes much more likely given the partial functional overlap of both enzyme types. In contrast, methylation of adenine residues by the cytosine-N4 methyltransferase M.BamHI was not detectable. On the basis of our results, we suggest that adenine-N6 and cytosine-N4 methyltransferases should be grouped into one enzyme family.

Chimeric restriction enzymes: what is next?

Chimeric restriction enzymes are a novel class of engineered nucleases in which the non-specific DNA cleavage domain of Fokl (a type IIS restriction endonuclease) is fused to other DNA-binding motifs. The latter include the three common eukaryotic DNA-binding motifs, namely the helix-turn-helix motif, the zinc finger motif and the basic helix-loop-helix protein containing a leucine zipper motif. Such chimeric nucleases have been shown to make specific cuts in vitro very close to the expected recognition sequences. The most important chimeric nucleases are those based on zinc finger DNA-binding proteins because of their modular structure. Recently, one such chimeric nuclease, Zif-QQR-F(N) was shown to find and cleave its target in vivo. This was tested by microinjection of DNA substrates and the enzyme into frog oocytes (Carroll et al., 1999). The injected enzyme made site-specific double-strand breaks in the targets even after assembly of the DNA into chromatin. In addition, this cleavage activated the target molecules for efficient homologous recombination. Since the recognition specificity of zinc fingers can be manipulated experimentally, chimeric nucleases could be engineered so as to target a specific site within a genome. The availability of such engineered chimeric restriction enzymes should make it feasible to do genome engineering, also commonly referred to as gene therapy.

Crystal structure of the DpnM DNA adenine methyltransferase from the DpnII restriction system of streptococcus pneumoniae bound to S-adenosylmethionine

BACKGROUND

. Methyltransferases (Mtases) catalyze the transfer of methyl groups from S-adenosylmethionine (AdoMet) to a variety of small molecular and macromolecular substrates. These enzymes contain a characteristic alpha/beta structural fold. Four groups of DNA Mtases have been defined and representative structures have been determined for three groups. DpnM is a DNA Mtase that acts on adenine N6 in the sequence GATC; the enzyme represents group alpha DNA Mtases, for which no structures are known.

RESULTS

. The structure of DpnM in complex with AdoMet was determined at 1.80 A resolution. The protein comprises a consensus Mtase fold with a helical cluster insert. DpnM binds AdoMet in a similar manner to most other Mtases and the enzyme contains a hollow that can accommodate DNA. The helical cluster supports a shelf within the hollow that may recognize the target sequence. Modeling studies indicate a potential site for binding the target adenine, everted from the DNA helix. Comparison of the DpnM structure and sequences of group alpha DNA Mtases indicates that the group is a genetically related family. Structural comparisons show DpnM to be most similar to a small-molecule Mtase and then to macromolecular Mtases, although several dehydrogenases show greater similarity than one DNA Mtase.

CONCLUSIONS

. DpnM, and by extension the DpnM family or group alpha Mtases, contains the consensus fold and AdoMet-binding motifs found in most Mtases. Structural considerations suggest that macromolecular Mtases evolved from small-molecule Mtases, with different groups of DNA Mtases evolving independently. Mtases may have evolved from dehydrogenases. Comparison of these enzymes indicates that in protein evolution, the structural fold is most highly conserved, then function and lastly sequence.

Two intertwined methylation activities of the MmeI restriction-modification class-IIS system from Methylophilus methylotrophus

The class-IIS restriction endonuclease, R.MmeI, was isolated from Methylophilus methylotrophus. It was originally described as a monomeric enzyme, with the native Mr 105000+/-7000, which did not cleave DNA efficiently [Boyd et al. (1986) Nucleic Acids Res. 14, 5255-5274; Tucholski et al. (1995) Gene 157, 87-92]. However, it was discovered that R.MmeI endonucleolytic activity is enhanced by S-adenosyl-l-methionine (AdoMet) and sinefungin, an analogue of AdoMet. Surprisingly, the purified R.MmeI endonuclease was found to have a second enzymatic activity, namely methylation of the adenine residue to N6-methyladenine in the top strand of the MmeI-recognition sequence, 5'-TCCR*AC-3' (*A=meA. The R.MmeI methylating activity requires AdoMet and is increased in the presence of several divalent cations, 20-fold by Mg2+ or Ca2+, and less by Mn2+, Zn2+ and Co2+; however, methylation is inhibited entirely by sinefungin, at concentrations above 9microM. The latter observation shows that the enhancing effect of AdoMet or sinefungin on the DNA cleavage was not related to the process of DNA methylation. Furthermore, a second component of the MmeI restriction-modification system, a M.MmeI methyltransferase, was isolated and purified. The M.MmeI protein was found to have an Mr of 48000+/-2000 (under denaturing conditions) and to methylate both adenine residues (*A) in the MmeI-recognition sequence 5'-TCCR*AC-3'/3'-*AGGYTG-5'. Methylation of the top strand does not inhibit the DNA cleavage by R.MmeI, whereas methylation of both DNA strands blocks the cleavage process.

FokI dimerization is required for DNA cleavage

FokI is a type IIs restriction endonuclease comprised of a DNA recognition domain and a catalytic domain. The structural similarity of the FokI catalytic domain to the type II restriction endonuclease BamHI monomer suggested that the FokI catalytic domains may dimerize. In addition, the FokI structure, presented in an accompanying paper in this issue of Proceedings, reveals a dimerization interface between catalytic domains. We provide evidence here that FokI catalytic domain must dimerize for DNA cleavage to occur. First, we show that the rate of DNA cleavage catalyzed by various concentrations of FokI are not directly proportional to the protein concentration, suggesting a cooperative effect for DNA cleavage. Second, we constructed a FokI variant, FokN13Y, which is unable to bind the FokI recognition sequence but when mixed with wild-type FokI increases the rate of DNA cleavage. Additionally, the FokI catalytic domain that lacks the DNA binding domain was shown to increase the rate of wild-type FokI cleavage of DNA. We also constructed an FokI variant, FokD483A, R487A, which should be defective for dimerization because the altered residues reside at the putative dimerization interface. Consistent with the FokI dimerization model, the variant FokD483A, R487A revealed greatly impaired DNA cleavage. Based on our work and previous reports, we discuss a pathway of DNA binding, dimerization, and cleavage by FokI endonuclease.

Chimeric restriction enzyme: Gal4 fusion to FokI cleavage domain

Gal4, a yeast protein, activates transcription of genes required for metabolism of galactose and melibiose. It binds as a dimer to a consensus palindromic 17-base pair DNA sequence. It is a member of the third family of proteins that contain zinc-mediated peptide loops that interact specifically with nucleic acids. Gal4 has a very distinctive zinc coordination profile and mode of DNA-binding. Here, we report the creation of a novel site-specific endonuclease by linking the N-terminal 147 amino acids of Gal4 to the cleavage domain of FokI endonuclease. The fusion protein is active and under optimal conditions, binds to a 17 bp consensus DNA site and cleaves near this site. As expected, the cleavage occurs on either side of the consensus binding site(s).

Cloning and analysis of the four genes coding for Bpu10I restriction-modification enzymes

The Bpu 10I R-M system from Bacillus pumilus 10, which recognizes the asymmetric 5'-CCTNAGC sequence, has been cloned, sequenced and expressed in Escherichia coli . The system comprises four adjacent, similarly oriented genes encoding two m5C MTases and two subunits of Bpu 10I ENase (34.5 and 34 kDa). Both bpu10IR genes either in cis or trans are needed for the manifestation of R. Bpu 10I activity. Subunits of R. Bpu 10I, purified to apparent homogeneity, are both required for cleavage activity. This heterosubunit structure distinguishes the Bpu 10I restriction endonuclease from all other type II restriction enzymes described previously. The subunits reveal 25% amino acid identity. Significant similarity was also identified between a 43 amino acid region of R. Dde I and one of the regions of higher identity shared between the Bpu 10I subunits, a region that could possibly include the catalytic/Mg2+binding center. The similarity between Bpu 10I and Dde I MTases is not limited to the conserved motifs (CM) typical for m5C MTases. It extends into the variable region that lies between CMs VIII and IX. Duplication of a progenitor gene, encoding an enzyme recognizing a symmetric nucleotide sequence, followed by concerted divergent evolution, may provide a possible scenario leading to the emergence of the Bpu 10I ENase, which recognizes an overall asymmetric sequence and cleaves within it symmetrically.

Chlorella virus NY-2A encodes at least 12 DNA endonuclease/methyltransferase genes

The 380-kb chlorella virus NY-2A genome is highly methylated; 45% of the cytosines are 5-methylcytosine (5mC) and 37% of the adenines are N6-methyladenine (6mA). Based on the sensitivity/resistance of NY-2A DNA to 80 methylation-sensitive DNA restriction endonucleases, the virus is predicted to encode at least 10 DNA methyltransferases: 7 6mA-specific methyltransferases, M.CviQI (GTmAC), M.CvQII (RmAR), M.CviQIII (TCGmA), M.CviQIV (GmATC), M.CviQV (TGCmA), M.CviQVI (GmANTC), and M.CviQVII (CmATG): and 3 5mC-specific methyltransferases, M.CviQVIII [RGmC(T/C/G)], M.CviQIX (mCC), and M.CviQX (mCGR). Five of the 6mA methyltransferase genes, M.CviQI, M.CviQIII, M.CviQV, M.CviQVI, and M.CviQVII, were cloned and sequenced. In addition, 2 site-specific endonuclease activities, R.CviQI (G/TAC) and NY2A-nickase (R/AG), were detected in cell-free extracts from NY-2A virus-infected chlorella. Therefore, the NY-2A genome contains at least 12 DNA methyltransferase and endonuclease genes which, altogether, compose about 3-4% of the virus genome.

Site-specific cleavage of DNA-RNA hybrids by zinc finger/FokI cleavage domain fusions

Zinc-finger proteins of the Cys2His2 type bind DNA-RNA hybrids with affinities comparable to those for DNA duplexes. Such zinc-finger proteins were converted into site-specific cleaving enzymes by fusing them to the FokI cleavage domain. The fusion proteins are active and under optimal conditions cleave DNA duplexes in a sequence-specific manner. These fusions also exhibit site-specific cleavage of the DNA strand within DNA-RNA hybrids albeit at a lower efficiency (approximately 50-fold) compared to the cleavage of the DNA duplexes. These engineered endonucleases represent the first of their kind in terms of their DNA-RNA cleavage properties, and they may have important biological applications.

Baculovirus-mediated expression and characterization of the full-length murine DNA methyltransferase

The original cDNA sequence reported for the murine DNA methyltransferase (MTase) was not full length. Recently, additional cDNA sequences have been reported that lie upstream of the original and contain an extended open reading frame with three additional ATGs in frame with the coding region [Tucker et al . (1996) Proc. Natl. Acad. Sci. USA , 93, 12920-12925; Yoder et al . (1996) J. Biol. Chem . 271, 31092-31097]. Genomic DNA upstream of this ATG contains two more ATGs in frame and no obvious splice site. We have constructed, and expressed in baculovirus, MTase clones that begin at each of these four ATGs and examined their properties. Constructs beginning with any of the first three ATGs as their initiator methionines give a predominant DNA MTase band of approximately 185 kDa on SDS-PAGE corresponding to translational initiation at the third ATG. The fourth ATG construct gives a much smaller protein band of 173 kDa. The 185 kDa protein was purified by HPLC, characterized by mass spectrometry and has a measured molecular mass of 184 +/- 0.5 kDa. All of these MTases were functional in vitro and steady state kinetic analysis showed that the recombinant proteins exhibit similar kinetic properties irrespective of their length. The homogeneous recombinant enzyme from the fourth ATG construct shows a 2.5-fold preference for a hemi-methylated DNA substrate as compared to an unmethylated substrate, whereas the 185 kDa protein is equally active on both substrates. The kinetic properties of the recombinant enzyme are similar to those reported for the native MTase derived from murine erythroleukemia cells. The new clones are capable of yielding large quantities of intact MTases for further structural and functional studies.

Rapid, sensitive, microbial detection by gene amplification using restriction endonuclease target sequences

The use of primers synthesized to eight class II restriction endonuclease target sequences, from Haemophilus parainfluenzae, Escherichia coli, Staphylococcus aureus, Salmonella infantis, Rhodobacter sphaeroides, Klebsiella pneumoniae, Bacillus amyloliquefaciens and Proteus vulgaris for single and multiplex PCR identification of the organisms is discussed. Results indicate that the method is sensitive and specific enough to detect single cells and attogram amounts of target DNA. It has also been demonstrated that the primers can be used in whole cell PCR for identification and whole cell PCR product recovery could be enhanced by the addition of gelatin or DMSO to PCR reaction mixtures. Other results have indicated that the method can be used for the definite identification of specific individuals present in mixed cultures or suspensions of organisms. The applicability of the method for detection of a specific strain within a group of closely related organisms has also been investigated and for that sequence/organism the results suggest that the proposed method is indeed very specific and discriminative. It is suggested that as more information becomes available regarding such sequences and their distribution, this approach could form the basis of a widescale, rapid, simple and cheap identification and/or typing system for bacteria.

Primary structure and strand specificity of BstF5I-1 DNA methyltransferase which recognizes 5'-GGATG-3'

The gene for BstF5I-1 DNA-methyltransferase (MTase) from Bacillus stearothermophilus F5 (a FokI isoschizomer, recognizing 5'-GGATG-3') was cloned and its nucleotide (nt) sequence was determined. Analysis of deduced amino acid (aa) sequence shows that M x BstF5I-1 belongs to D21 class of MTases and has a little homology with M x FokI. M x BstF5I-1 modifies only the upper strand of recognition sequence (5'-GGATG-3').

Carboxy-terminal sequence divergence and processing of the polyprotein antigen from Dirofilaria immitis

A polyprotein composed of multiple units arranged in direct tandem arrays has been identified in parasitic and free living nematodes. Analysis of previously cloned units from the Dirofilaria immitis polyprotein antigen (DiPA) indicated the units were nearly identical but here we demonstrate that they segregate into two related families. The consensus repeats, DiPA-CR1 and CR2, derived for each family are 80% identical. However, the repeats at the C-terminus of the polyprotein have diverged from DiPA-CR1 and CR2. This was shown by DNA sequence and Southern blot analysis of a 1.9 kb cDNA clone that encodes 4.4 C-terminal repeats (DiPA-TR1 through TR5). DiPA-TR3 through TR5 show 27-52% amino acid identity with the consensus repeats and 31-35% amino acid identity with one another. Metabolic labeling studies have shown that cleavage of DiPA generates a protein "ladder' from 14 to > 200 kDa. RRKR, a cleavage motif of subtilisin-like proprotein convertases, was identified as the natural cleavage site. In vitro digestion experiments with proteinase K suggest a structural model for DiPA consisting of protease resistant cores joined by protease sensitive linkers containing the RRKR site. This motif is absent between DiPA-TR3 and TR4 and has been altered to KR between DiPA-TR4 and TR5. An immunoblot of D. immitis extract probed with anti-DiPA-TR4/5 serum demonstrates the absence of cleavage at these sites. These divergent repeats provide an opportunity to investigate processing of the D. immitis polyprotein in vivo.

Cloning and analysis of the genes encoding the type IIS restriction-modification system HphI from Haemophilus parahaemolyticus

The genomic region encoding the type IIS restriction-modification (R-M) system HphI (enzymes recognizing the asymmetric sequence 5'-GGTGA-3'/5'-TCACC-3') from Haemophilus parahaemolyticus were cloned into Escherichia coli and sequenced. Sequence analysis of the R-M HphI system revealed three adjacent genes aligned in the same orientation: a cytosine 5 methyltransferase (gene hphIMC), an adenine N6 methyltransferase (hphIMA) and the HphI restriction endonuclease (gene hphIR). Either methyltransferase is capable of protecting plasmid DNA in vivo against the action of the cognate restriction endonuclease. hphIMA methylation renders plasmid DNA resistant to R.Hindill at overlapping sites, suggesting that the adenine methyltransferase modifies the 3'-terminal A residue on the GGTGA strand. Strong homology was found between the N-terminal part of the m6A methyltransferasease and an unidentified reading frame interrupted by an incomplete gaIE gene of Neisseria meningitidis. The HphI R-M genes are flanked by a copy of a 56 bp direct nucleotide repeat on each side. Similar sequences have also been identified in the non-coding regions of H.influenzae Rd DNA. Possible involvement of the repeat sequences in the mobility of the HphI R-M system is discussed.

Hybrid restriction enzymes: zinc finger fusions to Fok I cleavage domain

A long-term goal in the field of restriction-modification enzymes has been to generate restriction endonucleases with novel sequence specificities by mutating or engineering existing enzymes. This will avoid the increasingly arduous task of extensive screening of bacteria and other microorganisms for new enzymes. Here, we report the deliberate creation of novel site-specific endonucleases by linking two different zinc finger proteins to the cleavage domain of Fok I endonuclease. Both fusion proteins are active and under optimal conditions cleave DNA in a sequence-specific manner. Thus, the modular structure of Fok I endonuclease and the zinc finger motifs makes it possible to create "artificial" nucleases that will cut DNA near a predetermined site. This opens the way to generate many new enzymes with tailor-made sequence specificities desirable for various applications.

Cloning, analysis and expression of the HindIII R-M-encoding genes

The genes encoding the HindIII restriction endonuclease (R.HindIII ENase) and methyltransferase (M.HindIII MTase) from Haemophilus influenzae Rd were cloned and expressed in Escherichia coli and their nucleotide (nt) sequences were determined. The genes are transcribed in the same orientation, with the ENase-encoding gene (hindIIIR) preceding the MTase-encoding gene (hindIIIM). The two genes overlap by several nt. The ENase is predicted to be 300 amino acids (aa) in length (34,950 Da); the MTase is predicted to be 309 aa (35,550 Da). The HindIII ENase and MTase activities increased approx. 20-fold when the genes were brought under the control of an inducible lambda pL promoter. Highly purified HindIII ENase and MTase proteins were prepared and their N-terminal aa sequences determined. In H. influenzae Rd, the HindIII R-M genes are located between the holC and valS genes; they are not closely linked to the HindII R-M genes.

Effect of site-specific modification on restriction endonucleases and DNA modification methyltransferases

Restriction endonucleases have site-specific interactions with DNA that can often be inhibited by site-specific DNA methylation and other site-specific DNA modifications. However, such inhibition cannot generally be predicted. The empirically acquired data on these effects are tabulated for over 320 restriction endonucleases. In addition, a table of known site-specific DNA modification methyltransferases and their specificities is presented along with EMBL database accession numbers for cloned genes.

Chimeric restriction endonuclease

Fok I restriction endonuclease recognizes the nonpalindromic pentadeoxyribonucleotide 5'-GGATG-3'.5'-CATCC-3' in duplex DNA and cleaves 9 and 13 nt away from the recognition site. Recently, we reported the presence of two distinct and separable domains within this enzyme: one for the sequence-specific recognition of DNA (the DNA-binding domain) and the other for the endonuclease activity (the cleavage domain). Here, we report the construction of a chimeric restriction endonuclease by linking the Drosophila Ultrabithorax homeodomain to the cleavage domain (FN) of Fok I restriction endonuclease. The hybrid enzyme, Ubx-FN, was purified, and its cleavage properties were characterized. The hybrid enzyme shows the same DNA sequence-binding preference as that of Ubx; as expected, it cleaves the DNA away from the recognition site. On the 5'-TTAATGGTT-3' strand the hybrid enzyme cleaves 3 nt away from the recognition site, whereas it cuts the complementary 5'-AACCATTAA-3' strand 8, 9, or 10 nt away from the binding site. Similarly engineered hybrid enzymes could be valuable tools in physical mapping and sequencing of large eukaryotic genomes.

C-terminal deletion mutants of the FokI restriction endonuclease

We have constructed two C-terminal deletion mutants of the FokI restriction endonuclease by using the polymerase-chain-reaction technique and expressed them in Escherichia coli. The two mutant proteins (MP) of 41 and 30 kDa, were purified to homogeneity and their DNA-binding properties were characterized. The 41-kDa MP specifically binds the DNA sequence, 5'-GGATG/3'-CCTAC, like the wild-type (wt) FokI, but does not cleave DNA. The 30-kDa MP does not bind DNA. The affinity of the 41-kDa MP for the DNA substrate is comparable to that of wt FokI. The 41-kDa MP interacts with its substrate like the wt FokI, as revealed by hydroxyl radical footprinting experiments. In the presence of a DNA substrate, the 41-kDa MP is cleaved by trypsin into a 30-kDa N-terminal fragment and an 11-kDa C-terminal fragment. Addition of the HPLC-purified 11-kDa C-terminal fragment to the 30-kDa MP restores its sequence-specific DNA-binding property. These results confirm that the N-terminal 41-kDa fragment of the FokI ENase constitutes the DNA recognition domain of the ENase.

Single amino acid substitutions uncouple the DNA binding and strand scission activities of Fok I endonuclease

Single alanine substitution mutations at Asp-450 or Asp-467 of the type IIS restriction enzyme Fok I have no effect on the ability of the enzyme to bind strongly and selectively to its recognition site but completely eliminate its ability to cleave either strand of substrate DNA. Since wild-type Fok I shows no kinetic preference or required order of strand cleavage, these results indicate that Fok I, which evidently functions as a monomer, uses a single catalytic center to cleave both strands of DNA. In this respect, Fok I may resemble other monomeric enzymes that cleave double-stranded DNA.

The role of the preserved sequences of Dam methylase

We have undertaken a site directed mutational analysis of two of the preserved regions in the amino acid sequence of Dam methylase in order to characterize their role. Mutations in region IV (sequence DPPY) abolish catalytic activity and greatly affect AdoMet crosslinking. Mutants in region III display a lowered specific activity with an unchanged AdoMet crosslinking capacity. We have also made a series of deletions both at the N and C terminal parts of the protein, which have been found to provide inactive enzyme. We discuss the significance of these results for the understanding of the functional properties of the enzyme.

Biology of DNA restriction

Our understanding of the evolution of DNA restriction and modification systems, the control of the expression of the structural genes for the enzymes, and the importance of DNA restriction in the cellular economy has advanced by leaps and bounds in recent years. This review documents these advances for the three major classes of classical restriction and modification systems, describes the discovery of a new class of restriction systems that specifically cut DNA carrying the modification signature of foreign cells, and deals with the mechanisms developed by phages to avoid the restriction systems of their hosts.

Sequence of the Salmonella typhimurium StyLT1 restriction-modification genes: homologies with EcoP1 and EcoP15 type-III R-M systems and presence of helicase domains

The StyLT1 restriction-modification (R-M) system of Salmonella typhimurium has recently been suggested to belong to the type-III R-M systems [De Backer and Colson, Gene 97 (1991) 103-107]. The nucleotide sequences of StyLT1 mod and res have been determined. Two closely adjacent open reading frames were found 12 bp apart with coding capacities of 651 (Mod) and 982 (Res) amino acids (aa), respectively. The genes, lying in the same direction of transcription in the mod-res order, are transcribed as distinct units. The deduced aa sequences reveal homologies with known type-III enzymes from the Escherichia coli P1 prophage, E. coli P15 plasmid and Bacillus cereus chromosome. In addition, the StyLT1 restriction endonuclease (ENase), like other type-I and type-III ENases, contains sequence motifs characteristic of superfamily-II helicases, which may be involved in DNA unwinding at the cleavage site.

Alteration of the cleavage distance of Fok I restriction endonuclease by insertion mutagenesis

Fok I restriction endonuclease recognizes the nonpalindromic pentadeoxyribonucleotide 5'-GGATG-3'.5'-CATCC-3' in duplex DNA and cleaves 9 and 13 nucleotides away from the recognition site. Recently, we reported the presence of two distinct and separable protein domains within this enzyme--one for the sequence-specific recognition and the other for endonuclease activity. Here, we report the construction of two insertion mutants of Fok I endonuclease. The mutant enzymes were purified, and their cleavage properties were characterized. The mutants have the same DNA sequence specificity as the wild-type enzyme. However, compared with the wild-type enzyme, they cleave one nucleotide further away from the recognition site on both strands of the DNA substrates. Thus, it is possible to alter the cleavage distance of Fok I by protein engineering.