Nucleotide sequence and deletion analysis of the cellulase-encoding gene celH of Clostridium thermocellum

Following the terrestrial tracks of Caulobacter - redefining the ecology of a reputed aquatic oligotroph

For the past 60 years Caulobacter spp. have been commonly attributed an aquatic and oligotrophic lifestyle yet are not uncommon in nutrient-rich or soil environments. This study evaluates the environmental and ecological associations of Caulobacter to reconcile past evidence, largely limited to culturing and microscopy, with currently available metagenomic and genomic data. The distribution of Caulobacter species and their characteristic adhesion-conferring genes, holdfast (hfaAB), were determined using collections of 10,641 16S rRNA gene libraries (196 studies) and 2625 shotgun metagenomes (190 studies) from a range of terrestrial and aquatic environments. Evidence for ecotypic variation was tested in 26 genomes sourced from soil, rhizosphere, plant, groundwater, and water. Caulobacter were, on average, fourfold more relatively abundant in soil than in aquatic environments, and abundant in decomposing wood, compost, and particulate matter (in air and water). Caulobacter holdfast genes were 35-fold more abundant in soils than aquatic environments. Ecotypic differences between soil and aquatic Caulobacter were evident in the environmental associations of several species and differences in genome size and content among isolates. However, most abundant species were common to both environments, suggesting populations exist in a continuum that was evident in the re-analysis of studies on the temporal dynamics of, and sources of bacterioplankton to, lakes and rivers. This study provides a new perspective on the ecological profile of Caulobacter, demonstrating that members of this genus are predominantly soil-borne, possess an overlooked role in plant matter decomposition and a dependency on water-mediated dispersal.

Optimizing the composition of a synthetic cellulosome complex for the hydrolysis of softwood pulp: identification of the enzymatic core functions and biochemical complex characterization

BACKGROUND

The development of efficient cellulase blends is a key factor for cost-effectively valorizing biomass in a new bio-economy. Today, the enzymatic hydrolysis of plant-derived polysaccharides is mainly accomplished with fungal cellulases, whereas potentially equally effective cellulose-degrading systems from bacteria have not been developed. Particularly, a thermostable multi-enzyme cellulase complex, the cellulosome from the anaerobic cellulolytic bacterium Clostridium thermocellum is promising of being applied as cellulolytic nano-machinery for the production of fermentable sugars from cellulosic biomass.

RESULTS

In this study, 60 cellulosomal components were recombinantly produced in E. coli and systematically permuted in synthetic complexes to study the function-activity relationship of all available enzymes on Kraft pulp from pine wood as the substrate. Starting from a basic exo/endoglucanase complex, we were able to identify additional functional classes such as mannanase and xylanase for optimal activity on the substrate. Based on these results, we predicted a synthetic cellulosome complex consisting of seven single components (including the scaffoldin protein and a β-glucosidase) and characterized it biochemically. We obtained a highly thermostable complex with optimal activity around 60-65 °C and an optimal pH in agreement with the optimum of the native cellulosome (pH 5.8). Remarkably, a fully synthetic complex containing 47 single cellulosomal components showed comparable activity with a commercially available fungal enzyme cocktail on the softwood pulp substrate.

CONCLUSIONS

Our results show that synthetic bacterial multi-enzyme complexes based on the cellulosome of C. thermocellum can be applied as a versatile platform for the quick adaptation and efficient degradation of a substrate of interest.

Lignocellulose binding of a Cel5A-RtCBM11 chimera with enhanced β-glucanase activity monitored by electron paramagnetic resonance

BACKGROUND

The Bacillus subtilis endo-β-1,4-glucanase (BsCel5A) hydrolyzes β-1,3-1,4-linked glucan, and the enzyme includes a family 3 carbohydrate-binding module (CBM3) that binds β-1,4-linked glucan.

METHODS

Here we investigate the BsCel5A β-1,3-1,4 glucanase activity after exchanging the CBM3 domain for the family 11 CBM from Ruminiclostridium thermocellum celH (RtCBM11) having β-1,3-1,4 glucan affinity.

RESULTS

The BsCel5A-RtCBM11 presents a 50.4% increase in Vmax, a 10% reduction in K0.5, and a 2.1-fold increase in catalytic efficiency. Enzyme mobility and binding to barley β-1,3-1,4 glucan and pre-treated sugarcane bagasse were investigated using Electron Paramagnetic Resonance (EPR) with Site-Directed Spin Labeling (SDSL) of the binding site regions of the CBM3 and RtCBM11 domains in the BsCel5A-CBM3 and BsCel5A-RtCBM11, respectively. Although higher mobility than the RtCBM11 was shown, no interaction of the spin-labeled CBM3 with β-1,3-1,4 glucan was observed. In contrast, a Ka value of 0.22 mg/mL was estimated from titration of the BsCel5A-RtCBM11 with β-1,3-1,4 glucan. Enzyme binding as inferred from altered EPR spectra of the BsCel5A-RtCBM11 was observed only after xylan or lignin extraction from sugarcane bagasse. Binding to xylan- or lignin-free lignocellulose was correlated with a 4.5- to 5-fold increase in total reducing sugar release as compared to the milled intact sugarcane bagasse, suggesting that xylan impedes enzyme access to the β-1,3-1,4 glucan.

CONCLUSIONS

These results show that the non-specific binding of the BsCel5A-RtCBM11 to the lignin component of the cell wall is minimal, and represent the first reported use of EPR to directly study the interaction of glycoside hydrolyse enzymes with natural insoluble substrates.

Comparative characterization of all cellulosomal cellulases from Clostridium thermocellum reveals high diversity in endoglucanase product formation essential for complex activity

BACKGROUND

Clostridium thermocellum is a paradigm for efficient cellulose degradation and a promising organism for the production of second generation biofuels. It owes its high degradation rate on cellulosic substrates to the presence of supra-molecular cellulase complexes, cellulosomes, which comprise over 70 different single enzymes assembled on protein-backbone molecules of the scaffold protein CipA.

RESULTS

Although all 24 single-cellulosomal cellulases were described previously, we present the first comparative catalogue of all these enzymes together with a comprehensive analysis under identical experimental conditions, including enzyme activity, binding characteristics, substrate specificity, and product analysis. In the course of our study, we encountered four types of distinct enzymatic hydrolysis modes denoted by substrate specificity and hydrolysis product formation: (i) exo-mode cellobiohydrolases (CBH), (ii) endo-mode cellulases with no specific hydrolysis pattern, endoglucanases (EG), (iii) processive endoglucanases with cellotetraose as intermediate product (pEG4), and (iv) processive endoglucanases with cellobiose as the main product (pEG2). These modes are shown on amorphous cellulose and on model cello-oligosaccharides (with degree of polymerization DP 3 to 6). Artificial mini-cellulosomes carrying combinations of cellulases showed their highest activity when all four endoglucanase-groups were incorporated into a single complex. Such a modeled nonavalent complex (n = 9 enzymes bound to the recombinant scaffolding protein CipA) reached half of the activity of the native cellulosome. Comparative analysis of the protein architecture and structure revealed characteristics that play a role in product formation and enzyme processivity.

CONCLUSIONS

The identification of a new endoglucanase type expands the list of known cellulase functions present in the cellulosome. Our study shows that the variety of processivities in the enzyme complex is a key enabler of its high cellulolytic efficiency. The observed synergistic effect may pave the way for a better understanding of the enzymatic interactions and the design of more active lignocellulose-degrading cellulase cocktails in the future.

Enzymatic diversity of the Clostridium thermocellum cellulosome is crucial for the degradation of crystalline cellulose and plant biomass

The cellulosome is a supramolecular multienzyme complex comprised of a wide variety of polysaccharide-degrading enzymes and scaffold proteins. The cellulosomal enzymes that bind to the scaffold proteins synergistically degrade crystalline cellulose. Here, we report in vitro reconstitution of the Clostridium thermocellum cellulosome from 40 cellulosomal components and the full-length scaffoldin protein that binds to nine enzyme molecules. These components were each synthesized using a wheat germ cell-free protein synthesis system and purified. Cellulosome complexes were reconstituted from 3, 12, 30, and 40 components based on their contents in the native cellulosome. The activity of the enzyme-saturated complex indicated that greater enzymatic variety generated more synergy for the degradation of crystalline cellulose and delignified rice straw. Surprisingly, a less complete enzyme complex displaying fewer than nine enzyme molecules was more efficient for the degradation of delignified rice straw than the enzyme-saturated complex, despite the fact that the enzyme-saturated complex exhibited maximum synergy for the degradation of crystalline cellulose. These results suggest that greater enzymatic diversity of the cellulosome is crucial for the degradation of crystalline cellulose and plant biomass, and that efficient degradation of different substrates by the cellulosome requires not only a different enzymatic composition, but also different cellulosome structures.

Carbohydrate-binding modules influence substrate specificity of an endoglucanase from Clostridium thermocellum

Most cellulases contain carbohydrate-binding modules (CBMs) that largely contribute to their activity for insoluble substrates. Clostridium thermocellum Cel5E is an endoglucanase having xylanolytic activity. The Cel5E originally has a family 11 CBM preferentially binding to β-1,4- and β-1,3-1,4-mixed linkage glucans. In this study, we replaced the CBM with a different type of CBM, either a family 3 microcrystalline cellulose-directed CBM from Clostridium josui scaffoldin, or a family 6 xylan-directed CBM from Clostridium stercorarium xylanase 11A. Chimeric endoglucanases showed enhanced activity that was affected by CBM binding specificity. These chimeric enzymes could efficiently degrade milled lignocellulosic materials, such as corn hulls, because of heterologous components in the plant cell wall, indicating that diverse CBMs play roles in degradation of lignocellulosic materials.

Biochemical characterization and structural analysis of a bifunctional cellulase/xylanase from Clostridium thermocellum

We expressed an active form of CtCel5E (a bifunctional cellulase/xylanase from Clostridium thermocellum), performed biochemical characterization, and determined its apo- and ligand-bound crystal structures. From the structures, Asn-93, His-168, His-169, Asn-208, Trp-347, and Asn-349 were shown to provide hydrogen-bonding/hydrophobic interactions with both ligands. Compared with the structures of TmCel5A, a bifunctional cellulase/mannanase homolog from Thermotoga maritima, a flexible loop region in CtCel5E is the key for discriminating substrates. Moreover, site-directed mutagenesis data confirmed that His-168 is essential for xylanase activity, and His-169 is more important for xylanase activity, whereas Asn-93, Asn-208, Tyr-270, Trp-347, and Asn-349 are critical for both activities. In contrast, F267A improves enzyme activities.

Functional subgenomics of Clostridium thermocellum cellulosomal genes: identification of the major catalytic components in the extracellular complex and detection of three new enzymes

Clostridium thermocellum produces the most efficient enzyme-complex for the degradation of polysaccharides in biomass, the large extracellular cellulosome. The draft complete genomic sequence of Clostridium thermocellum was screened for open reading frames (ORF) containing cellulosomal dockerin sequences. Seventy-one putative cellulosomal genes were detected. One third of these ORFs may be involved in cellulose hydrolysis. Most of the others showed homology to hemicellulases, pectinases, chitinases, glycosidases or esterases potentially involved in the unwrapping of cellulose fibers. To identify the predominant catalytic components, cellulosomes were purified and the components were separated by an adapted two-dimensional gel electrophoresis technique. The apparent major spots were identified by MALDI-TOF/TOF. Ten of the components were previously known: the structural protein CipA, the endo-glucanases Cel8A, Cel5G, Cel9N, the cellobiohydrolases Cbh9A, Cel9K, Cel48S, the xylanases Xyn10C, Xyn10Z, and the chitinase Chi18A. In addition, three hitherto unknown major components were detected, Cel9R, Xyn10D and Xgh74A. These major components in the cellulosomal particles most probably constitute the essential enzymes for crystalline cellulose hydrolysis.

How Family 26 Glycoside Hydrolases Orchestrate Catalysis on Different Polysaccharides

One of the most intriguing features of the 90 glycoside hydrolase families (GHs) is the range of specificities displayed by different members of the same family, whereas the catalytic apparatus and mechanism are often invariant. Family GH26 predominantly comprises beta-1,4 mannanases; however, a bifunctional Clostridium thermocellum GH26 member (hereafter CtLic26A) displays a markedly different specificity. We show that CtLic26A is a lichenase, specific for mixed (Glcbeta1,4Glcbeta1,4Glcbeta1,3)n oligo- and polysaccharides, and displays no activity on manno-configured substrates or beta-1,4-linked homopolymers of glucose or xylose. The three-dimensional structure of the native form of CtLic26A has been solved at 1.50-A resolution, revealing a characteristic (beta/alpha)8 barrel with Glu-109 and Glu-222 acting as the catalytic acid/base and nucleophile in a double-displacement mechanism. The complex with the competitive inhibitor, Glc-beta-1,3-isofagomine (Ki 1 microm), at 1.60 A sheds light on substrate recognition in the -2 and -1 subsites and illuminates why the enzyme is specific for lichenan-based substrates. Hydrolysis of beta-mannosides by GH26 members is thought to proceed through transition states in the B2,5 (boat) conformation in which structural distinction of glucosides versus mannosides reflects not the configuration at C2 but the recognition of the pseudoaxial O3 of the B2,5 conformation. We suggest a different conformational itinerary for the GH26 enzymes active on gluco-configured substrates.

Cellulase, clostridia, and ethanol

Biomass conversion to ethanol as a liquid fuel by the thermophilic and anaerobic clostridia offers a potential partial solution to the problem of the world's dependence on petroleum for energy. Coculture of a cellulolytic strain and a saccharolytic strain of Clostridium on agricultural resources, as well as on urban and industrial cellulosic wastes, is a promising approach to an alternate energy source from an economic viewpoint. This review discusses the need for such a process, the cellulases of clostridia, their presence in extracellular complexes or organelles (the cellulosomes), the binding of the cellulosomes to cellulose and to the cell surface, cellulase genetics, regulation of their synthesis, cocultures, ethanol tolerance, and metabolic pathway engineering for maximizing ethanol yield.

The family 11 carbohydrate-binding module of Clostridium thermocellum Lic26A-Cel5E accommodates beta-1,4- and beta-1,3-1,4-mixed linked glucans at a single binding site

Modular glycoside hydrolases that attack recalcitrant polymers generally contain noncatalytic carbohydrate-binding modules (CBMs), which play a critical role in the action of these enzymes by localizing the appended catalytic domains onto the surface of insoluble polysaccharide substrates. Type B CBMs, which recognize single polysaccharide chains, display ligand specificities that are consistent with the substrates hydrolyzed by the associated catalytic domains. In enzymes that contain multiple catalytic domains with distinct substrate specificities, it is unclear how these different activities influence the evolution of the ligand recognition profile of the appended CBM. To address this issue, we have characterized the properties of a family 11 CBM (CtCBM11) in Clostridium thermocellum Lic26A-Cel5E, an enzyme that contains GH5 and GH26 catalytic domains that display beta-1,4- and beta-1,3-1,4-mixed linked endoglucanase activity, respectively. Here we show that CtCBM11 binds to both beta-1,4- and beta-1,3-1,4-mixed linked glucans, displaying K(a) values of 1.9 x 10(5), 4.4 x 10(4), and 2 x 10(3) m(-1) for Glc-beta1,4-Glc-beta1,4-Glc-beta1,3-Glc, Glc-beta1,4-Glc-beta1,4-Glc-beta1,4-Glc, and Glc-beta1,3-Glc-beta1,4-Glc-beta1,3-Glc, respectively, demonstrating that CBMs can display a preference for mixed linked glucans. To determine whether these ligands are accommodated in the same or diverse sites in CtCBM11, the crystal structure of the protein was solved to a resolution of 1.98 A. The protein displays a beta-sandwich with a concave side that forms a potential binding cleft. Site-directed mutagenesis revealed that Tyr(22), Tyr(53), and Tyr(129), located in the putative binding cleft, play a central role in the recognition of all the ligands recognized by the protein. We propose, therefore, that CtCBM11 contains a single ligand-binding site that displays affinity for both beta-1,4- and beta-1,3-1,4-mixed linked glucans.

Cellulose degrading enzymes and their potential industrial applications

Bioconversion of cellulose to soluble sugars and glucose is catalyzed by a group of enzymes called cellulases. Microorganisms including fungi, bacteria and actinomycetes produce mainly three types of cellulase components--endo-1,4-beta-D-glucanase, exo-1,4-beta-D-glucanase and beta-glucosidase--either separately or in the form of a complex. Over the last several decades, cellulases have become better understood at a fundamental level; nevertheless, much remains to be learnt. The tremendous commercial potential of cellulases in a variety of applications remains the driving force for research in this area. This review summarizes the present state of knowledge on microbial cellulases and their applications.

Properties and mutation analysis of the CelK cellulose-binding domain from the Clostridium thermocellum cellulosome

The family IV cellulose-binding domain of Clostridium thermocellum CelK (CBD(CelK)) was expressed in Escherichia coli and purified. It binds to acid-swollen cellulose (ASC) and bacterial microcrystalline cellulose (BMCC) with capacities of 16.03 and 3.95 micromol/g of cellulose and relative affinities (K(r)) of 2.33 and 9.87 liters/g, respectively. The CBD(CelK) is the first representative of family IV CBDs to exhibit an affinity for BMCC. The CBD(CelK) also binds to the soluble polysaccharides lichenin, glucomannan, and barley beta-glucan, which are substrates for CelK. It does not bind to xylan, galactomannan, and carboxymethyl cellulose. The CBD(CelK) contains 1 mol of calcium per mol. The CBD(CelK) has three thiol groups and one disulfide, reduction of which results in total loss of cellulose-binding ability. To reveal amino acid residues important for biological function of the domain and to investigate the role of calcium in the CBD(CelK) four highly conserved aromatic residues (Trp(56), Trp(94), Tyr(111), and Tyr(136)) and Asp(192) were mutated into alanines, giving the mutants W56A, W94A, Y111A, Y136A, and D192A. In addition 14 N-terminal amino acids were deleted, giving the CBD-N(CelK). The CBD-N(CelK) and D192A retained binding parameters close to that of the intact CBD(CelK), W56A and W94A totally lost the ability to bind to cellulose, Y136A bound to both ASC and BMCC but with significantly reduced binding capacity and K(r) and Y111A bound weakly to ASC and did not bind to BMCC. Mutations of the aromatic residues in the CBD(CelK) led to structural changes revealed by studying solubility, circular-dichroism spectra, dimer formation, and aggregation. Calcium content was drastically decreased in D192A. The results suggest that Asp192 is in the calcium-binding site of the CBD(CelK) and that calcium does not affect binding to cellulose. The 14 amino acids from the N terminus of the CBD(CelK) are not important for binding. Tyr136, corresponding to Cellulomonas fimi CenC CBD(N1) Y85, located near the binding cleft, might be involved in the formation of the binding surface, while Y111, W56A, and W94A are essential for the binding process by keeping the CBD(CelK) correctly folded.

The cellulosome concept as an efficient microbial strategy for the degradation of insoluble polysaccharides

The cellulosome is an extracellular supramolecular machine that can efficiently degrade crystalline cellulosic substrates and associated plant cell wall polysaccharides. The cellulosome arrangement can also promote adhesion to the insoluble substrate, thus providing individual microbial cells with a direct competitive advantage in the utilization of the soluble hydrolysis products.

The Glu residue in the conserved Asn-Glu-Pro sequence of endoglycoceramidase is essential for enzymatic activity

Endoglycoceramidase (EGCase) is an enzyme capable of cleaving the glycosidic linkage between oligosaccharides and ceramides of various glycosphingolipids. We previously cloned the gene encoding EGCase II of Rhodococcus sp. M-777 and reported that the deduced amino acid sequence contained the Asn-Glu-Pro (NEP) sequence, conserved as part of the active site of family A cellulases (endo-1,4-beta-glucanases) (J. Biol. Chem. 272, 19846, 1997). The NEP sequence was also found in the deduced amino acid sequence of the newly cloned EGCase gene of Rhodococcus sp. C9. Replacement of the Glu residue in the NEP sequence with Gln or Asp by site-directed mutagenesis caused marked loss of enzymatic activity in both the M-777 and C9 EGCases but did not affect the expression of EGCase protein. This result clearly indicated that the NEP sequence is part of the active site of EGCase, in which the Glu residue plays an important role in the catalytic reaction, possibly in the same manner as in endo-1,4-beta-glucanase.

Cellulosomes-structure and ultrastructure

The cellulosome is a macromolecular machine, whose components interact in a synergistic manner to catalyze the efficient degradation of cellulose. The cellulosome complex is composed of numerous kinds of cellulases and related enzyme subunits, which are assembled into the complex by virtue of a unique type of scaffolding subunit (scaffoldin). Each of the cellulosomal subunits consists of a multiple set of modules, two classes of which (dockerin domains on the enzymes and cohesin domains on scaffoldin) govern the incorporation of the enzymatic subunits into the cellulosome complex. Another scaffoldin module-the cellulose-binding domain-is responsible for binding to the substrate. Some cellulosomes appear to be tethered to the cell envelope via similarly intricate, multiple-domain anchoring proteins. The assemblage is organized into dynamic polycellulosomal organelles, which adorn the cell surface. The cellulosome dictates both the binding of the cell to the substrate and its extracellular decomposition to soluble sugars, which are then taken up and assimilated by normal cellular processes.

Properties of exgS, a gene for a major subunit of the Clostridium cellulovorans cellulosome

The nucleotide sequence of P70, one of the three major subunits of the Clostridium cellulovorans cellulosome, has been determined. The gene designated as exgS (Genbank Accession No. U34793) consists of 2112 bp and encodes a protein containing 703 amino acids with a molecular mass of 77.7 kDa. ExgS has a putative signal peptide sequence of 32 amino acids. The N-terminal region is separated from the C-terminal region by a short-Pro-Thr-Pro linker. The C-terminal region of ExgS contains a duplicated sequence (DS), each sequence consisting of 22 amino acids. exgS, located 67 bp downstream of cbpA in the chromosome, is immediately upstream of a gene encoding a family 9 type endoglucanase that we have designated as EngH. This gene cluster to date consists of regA-cbpA-exgS-engH. Recombinant ExgS (rExgS) containing no signal peptide was expressed in E. coli. The rExgS actively digested several forms of cellulose, including Avicel, Sigmacell101, crystalline cellulose, and xylan, but not carboxymethyl cellulose (CMC). Cellotetraose was the smallest oligosaccharide substrate for rExgS. The enzymatic studies indicated that ExgS was an exoglucanase and had some properties similar to that of CelS from C. thermocellum and CelF from C.cellulolyticum. An exoglucanase has now been found to be a component of the C. cellulovorans cellulosome as well as the previously reported endoglucanases.

Cellulase and hemicellulase genes of Clostridium thermocellum from five independent collections contain few overlaps and are widely scattered across the chromosome

Five independent collections, comprising a total of 34 clones encoding cellulases, hemicellulases and cell surface proteins of Clostridium thermocellum, were searched for overlapping or contiguous DNA fragments. The clones were hybridized to large genomic restriction fragments separated by pulse-field electrophoresis. Clones hybridizing to the same fragment were further compared by hybridization to smaller fragments, by cross-hybridization and by restriction mapping. The probes hybridized to loci which were usually not clustered and were scattered over at least one third of the chromosome. Besides previously identified clusters, only two clones were found to be adjacent. Two pairs of clones appeared to contain the same genes cloned in duplicate, and one of the genes was shown to be cloned in triplicate.

Sequence of xynC and properties of XynC, a major component of the Clostridium thermocellum cellulosome

The nucleotide sequence of the Clostridium thermocellum F1 xynC gene, which encodes the xylanase XynC, consists of 1,857 bp and encodes a protein of 619 amino acids with a molecular weight of 69,517. XynC contains a typical N-terminal signal peptide of 32 amino acid residues, followed by a 165-amino-acid sequence which is homologous to the thermostabilizing domain. Downstream of this domain was a family 10 catalytic domain of glycosyl hydrolase. The C terminus separated from the catalytic domain by a short linker sequence contains a dockerin domain responsible for cellulosome assembly. The N-terminal amino acid sequence of XynC-II, the enzyme purified from a recombinant Escherichia coli strain, was in agreement with that deduced from the nucleotide sequence although XynC-II suffered from proteolytic truncation by a host protease(s) at the C-terminal region. Immunological and N-terminal amino acid sequence analyses disclosed that the full-length XynC is one of the major components of the C. thermocellum cellulosome. XynC-II was highly active toward xylan and slightly active toward p-nitrophenyl-beta-D-xylopyranoside, p-nitrophenyl-beta-D-cellobioside, p-nitrophenyl-beta-D-glucopyranoside, and carboxymethyl cellulose. The Km and Vmax values for xylan were 3.9 mg/ml and 611 micromol/min/mg of protein, respectively. This enzyme was optimally active at 80 degrees C and was stable up to 70 degrees C at neutral pHs and over the pH range of 4 to 11 at 25 degrees C.

Catalytic properties of the cellulose-binding endoglucanase F from Fibrobacter succinogenes S85

The celF gene from the predominant cellulolytic ruminal bacterium Fibrobacter succinogenes encodes a 118.3-kDa cellulose-binding endoglucanase, endoglucanase F (EGF). This enzyme possesses an N-terminal cellulose-binding domain and a C-terminal catalytic domain. The purified catalytic domain displayed an activity profile typical of an endoglucanase, with high catalytic activity on carboxymethyl cellulose and barley beta-glucan. Immunoblotting of EGF and the formerly characterized endoglucanase 2 (EG2) from F. succinogenes with antibodies prepared against each of the enzymes demonstrated that EGF and EG2 contain cross-reactive epitopes. This data in conjunction with evidence that the proteins are the same size, share a 19-residue internal amino acid sequence, possess similar catalytic properties, and both bind to cellulose allows the conclusion that celF codes for EG2.

Expression of CEL2 and CEL4, two proteins from Agaricus bisporus with similarity to fungal cellobiohydrolase I and beta-mannanase, respectively, is regulated by the carbon source

Two new cellulose-growth specific (cel) cDNAs, cel2 and cel4, have been isolated from an Agaricus bisporus cDNA expression library by immunoscreening with an A. bisporus anti-'endoglucanase' antibody. The deduced amino acid sequences showed that both CEL2 and CEL4 proteins have a modular structure consisting of a fungal-type cellulose-binding domain (CBD) and a catalytic domain separated by a linker region rich in Pro, Ser and Thr. The CEL2 and CEL4 catalytic domains were homologous to fungal cellobiohydrolases (CBH) in family 7 and to fungal mannanases in family 5 of the glycosyl hydrolases, respectively. A previously isolated cDNA derived from a constitutive gene was also sequenced. The deduced amino acid sequence corresponded to 5-aminolaevulinic acid synthase (ALA), the first enzyme in the haem biosynthetic pathway, and was most similar to other fungal ALAs. RNA analysis showed that the expression of cel2 and cel4 genes was induced by cellulose and repressed by glucose, fructose and lactose. The soluble cellulose derivative CM-cellulose induced mRNA accumulation for cel1 but not cel2, cel3 or cel4. Mannitol, maltose, sorbitol and glycerol decreased cel2 and cel4 mRNA levels to different extents. cel1, cel2, cel3 and cel4 mRNAs all disappeared after the addition of glucose with apparent half-lives of less than 20 min. Whether cel mRNAs have short half-lives or glucose affects the stability of cel transcripts remains to be investigated.

Microorganisms and enzymes involved in the degradation of plant fiber cell walls

One of natures most important biological processes is the degradation of lignocellulosic materials to carbon dioxide, water and humic substances. This implies possibilities to use biotechnology in the pulp and paper industry and consequently, the use of microorganisms and their enzymes to replace or supplement chemical methods is gaining interest. This chapter describes the structure of wood and the main wood components, cellulose, hemicelluloses and lignins. The enzyme and enzyme mechanisms used by fungi and bacteria to modify and degrade these components are described in detail. Techniques for how to assay for these enzyme activities are also described. The possibilities for biotechnology in the pulp and paper industry and other fiber utilizing industries based on these enzymes are discussed.

Cloning, DNA sequencing, and expression of the gene encoding Clostridium thermocellum cellulase CelJ, the largest catalytic component of the cellulosome

The Clostridium thermocellum F1 celJ gene, encoding endoglucanase J (CelJ), consists of an open reading frame (ORF) of 4,803 nucleotides and encodes a protein of 1,601 amino acids with a molecular weight of 178,055. The ORF was confirmed as celJ by comparison with the N-terminal sequence of a truncated CelJ derivative. CelJ is a modular enzyme composed of N-terminal signal peptide and six domains in the following order: an S-layer homology domain, a domain of unknown function (UD-1), a subfamily E1 endoglucanase domain, a family J endoglucanase domain, a docking domain, and another domain of unknown function (UD-2). UD-1 has no significant similarity to UD-2. CelJ hydrolyzed carboxymethylcellulose and xylan, and xylanase activity was ascribed to the family J domain. Antiserum raised against the truncated CelJ cross-reacted with proteins contained in the cellulosome of C. thermocellum F1. These results strongly suggest that CelJ is equivalent to S2, which was identified as the largest catalytic component in the cellulosome of C. thermocellum YS. A second but incomplete ORF encoding an enzyme classified in subfamily E2 endoglucanase, was located downstream of celJ.

Microbial hydrolysis of polysaccharides

Microorganisms are efficient degraders of starch, chitin, and the polysaccharides in plant cell walls. Attempts to purify hydrolases led to the realization that a microorganism may produce a multiplicity of enzymes, referred to as a system, for the efficient utilization of a polysaccharide. In order to fully characterize a particular enzyme, it must be obtained free of the other components of a system. Quite often, this proves to be very difficult because of the complexity of a system. This realization led to the cloning of the genes encoding them as an approach to eliminating other components. More than 400 such genes have been cloned and sequenced, and the enzymes they encode have been grouped into more than 50 families of related amino acid sequences. The enzyme systems revealed in this manner are complex on two quite different levels. First, many of the individual enzymes are complex, as they are modular proteins comprising one or more catalytic domains linked to ancillary domains that often include one or more substrate-binding domains. Second, the systems are complex, comprising from a few to 20 or more enzymes, all of which hydrolyze a particular substrate. Systems for the hydrolysis of plant cell walls usually contain more components than systems for the hydrolysis of starch and chitin because the cell walls contain several polysaccharides. In general, the systems produced by different microorganisms for the hydrolysis of a particular polysaccharide comprise similar enzymes from the same families.

Structural role of calcium for the organization of the cellulosome of Clostridium thermocellum

The cellulosome of Clostridium thermocellum is a multipolypeptide complex of structural and catalytic subunits. Several of the catalytic subunits have at the carboxyl end a conserved duplicated region (CDR) which interacts with internally repeated elements (IREs) of scaffolding subunits such as CipA. This interaction requires calcium. The two parts of the CDR region here designated CDR1 and CDR2 (closest to the carboxyl end) each consist of about 20 amino acids residues. As shown in our previous paper [Choi, S.K., & Ljungdahl, L.G. (1996) Biochemistry 35, 4897-4905], treatment of the cellulosome with ethylenediaminetetraacetic acid (EDTA) under aerobic conditions disintegrates the cellulosome with formation of truncated catalytic subunits. The cleavage is at a specific asparagine residue located within CDR1 and occurs with complete loss of CDR2. Two branched peptides containing the amino acid sequences of CDR1 and CDR2 (designated bCDR1 and bCDR2) were synthesized, and specific antibodies were raised against them. These antibodies did not cross react with bCDR1 or bCDR2, respectively. After sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and Western blotting, it was observed that about 15 subunits of the cellulosome reacted with anti-bCDR1 and anti-bCDR2. In a similar experiment with EDTA-treated cellulosomes, these subunits reacted with anti-bCDR1 but not with anti-bCDR2, showing that they lost the bCDR2 epitope and were truncated. The peptide bCDR1 binds calcium, whereas bCDR2 does not. Furthermore, bCDR1 but not bCDR2 binds to CipA, presumably at IRE regions. This binding requires calcium. A model is proposed for the binding of the catalytic subunits to CipA which involves CDR1, an IRE, and calcium.

Dissociation of the cellulosome of Clostridium thermocellum in the presence of ethylenediaminetetraacetic acid occurs with the formation of trucated polypeptides

The cellulosome of Clostridium thermocellum JW20 consists of 14-26 different polypeptides as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The intact cellulosomes hydrolyzes crystalline cellulose in the presence of Ca2+ and thiols. This activity is inhibited by ethylenediaminetetraacetic acid (EDTA). Ca is incorporated into the cellulosome and tightly bound as demonstrated using 45Ca added to the growth medium. Upon incubation in 50 mM Tris (pH 7.5), 0.1 M NaCl, and 5 mM EDTA at 37 degrees C, Ca is released from the cellulosome, which disintegrates into polypeptides. The SDS-PAGE pattern of cellulosomal polypeptides is remarkably different after the EDTA treatment when compared to this pattern of untreated cellulosomes. Polypeptide bands corresponding to molecular masses of 160, 98, 76, 91, and 54 kDa disappear, and new bands of masses 150, 132, 91, 71, 57, and 46 kDa appear. N-terminal analyses of the 98, 76, 91, and 71 kDa polypeptides show that the 91 and 71 kDa polypeptides are truncated products of the 98 and 76 kDa polypeptides, respectively. The 76 and 71 kDa polypeptides correspond to CelS [Wang, W. K., Kruus K., & Wu, J. H. D. (1993) J. Bacteriol. 175, 1293-1302]. The 71 kDa polypeptide is formed from the 76 kDa polypeptide during the EDTA treatment, by a cleavage that occurs at asparagine residue 681. It involves the removal of 60 amino acid residues from the C-terminal end. All catalytic subunits so far characterized contain an asparagine residue corresponding to residue 681 of CelS. This residue is part of the conserved duplicated region found in catalytically active subunits, and it is postulated that several of these subunits also are truncated by the EDTA treatment. The polypeptides truncated by the EDTA treatment reduced Ca binding capacities compared to their native subunits, indicating a Ca-binding site within the conserved duplicated region. This region has been implicated in the binding of the catalytic peptides to the scaffolding polypeptide CipA, which is a structural protein of the cellulosome and has a strong affinity for calcium.

Family A cellulases: two essential tryptophan residues in endoglucanase III from Trichoderma reesei

Three tryptophan residues are readily oxidised by N-bromosuccinimide in endoglucanase III from Trichoderma reesei. Evidence was obtained that the residue first modified is situated in the cellulose-binding domain and the second in the enzyme's catalytic site. The latter influences the binding and hydrolysis of soluble substrates. The modification of a third residue does not further affect the catalytic properties. The present results complement published data concerning other identified catalytic residues, and help to clarify the active site structure of family A cellulases.

Direct isolation of functional genes encoding cellulases from the microbial consortia in a thermophilic, anaerobic digester maintained on lignocellulose

Gene libraries ("zoolibraries") were constructed in Escherichia coli using DNA isolated from the mixed liquor of thermophilic, anaerobic digesters, which were in continuous operation with lignocellulosic feedstocks for over 10 years. Clones expressing cellulase and xylosidase were readily recovered from these libraries. Four clones that hydrolyzed carboxymethylcellulose and methylumbelliferyl-beta-D-cellobiopyranoside were characterized. All four cellulases exhibited temperature optima (60-65 degrees C) and pH optima (pH 6-7) in accordance with conditions of the enrichment. The DNA sequence of the insert in one clone (plasmid pFGH1) was determined. This plasmid encoded an endoglucanase (celA) and part of a putative beta-glucosidase (celB), both of which were distinctly different from all previously reported homologues. CelA protein shared limited homology with members of the A3 subfamily of cellulases, being similar to endoglucanase C from Clostridium thermocellum (40% identity). The N-terminal part of CelB protein was most similar to beta-glucosidase from Pseudomonas fluorescens subsp. cellulosa (28% homology). The use of zoolibraries constructed from natural or laboratory enrichment cultures offers the potential to discover many new enzymes for biotechnological applications.

A common protein fold and similar active site in two distinct families of beta-glycanases

The structure of Clostridium thermocellum endoglucanase CelC, a member of the largest cellulase family (family A), has been determined at 2.15 A resolution. The protein folds into an (alpha/beta)8 barrel, with a deep active-site cleft generated by the insertion of a helical subdomain. The structure of the catalytic core of xylanase XynZ, which belongs to xylanase family F, has been determined at 1.4 A resolution. In spite of significant differences in substrate specificity and structure (including the absence of the helical subdomain), the general polypeptide folding pattern, architecture of the active site and catalytic mechanism of XynZ and CelC are similar, suggesting a common evolutionary origin.

Cloning and expression of the Clostridium thermocellum celS gene in Escherichia coli

Clostridium thermocellum ATCC 27405 produces an extremely complicated multi-component cellulase aggregate (cellulosome) highly active on crystalline cellulose. From the cellulosome, two subunits, CelS (or Ss; M(r) = 82,000) and CelL (or SL, CipA; M(r) = 250,000), have been identified as essential for crystalline cellulose degradation [Wu et al. (1988) Biochemistry 27:1703]. We have determined the DNA sequence of the celS gene from four cloned DNA fragments encompassing this gene [Wang et al. (1993) J Bacteriol 175:1293]. To express the entire celS gene in Escherichia coli, the celS structural gene was amplified by the polymerase chain reaction (PCR) employing the PCR primers corresponding to sequences flanking the desired gene. This PCR product (2.1 x 10(3) bases; 2.1 kb) was cloned into an E. coli expression vector pRSET B. Subsequent expression of the cloned gene resulted in a fusion protein (rCelS; M(r) = 86,000) as inclusion bodies. The rCelS protein was recognized specifically by an anti-CelS antiserum in a Western blot analysis. The inclusion bodies were purified and solubilized in 5 M urea. The refolded rCelS produced very little reducing sugar from carboxymethylcellulose. However, it showed a higher activity on the crystalline cellulose (Avicel) and an even higher activity on phosphoric-acid-swollen Avicel. These results indicate that the CelS is an exoglucanase.

Cloning and characterization of the poly(hydroxyalkanoic acid)-depolymerase gene locus, phaZ1, of Pseudomonas lemoignei and its gene product

Four different DNA fragments each coding for poly(hydroxyalkanoic acid) depolymerase (phaZ1-phaZ4) were isolated in pUC plasmids from a genomic library of Pseudomonas lemoignei in Escherichia coli. All recombinant strains secreted a highly active poly(3-hydroxybutyric acid) depolymerase and produced large translucent halos on an opaque medium containing poly(3-hydroxybutyric acid) granules. One DNA region (phaZ1) was present in seven independently isolated clones. Three other cloned DNA fragments were different from phaZ1 and from each other (phaZ2-phaZ4). In phaZ1, an open-reading frame of 1245 bp was identified from the nucleotide sequence of a 5435-bp MboI fragment (57 mol G + C/100 mol) of this region and encoded a novel poly(hydroxyalkanoic acid) depolymerase of P. lemoignei, poly(3-hydroxybutyric acid) depolymerase C. A leader-sequence peptidase-cleavage site was predicted from the deduced amino acid sequence between Ala37 and Leu38. The calculated relative molecular masses of the precursor and the putative mature protein were 43468 and 39581, respectively. The polypeptide contains a lipase consensus sequence (Gly-Xaa-Ser-Xaa-Gly) and an unusually high proportion of threonine residues (22 of 36 amino acids) near the C-terminus. The N-terminus of the deduced amino acid sequence of PhaZ1 differed from that of the purified poly(3-hydroxybutyric acid) depolymerases A, B and the poly(3-hydroxyvaleric acid) depolymerase of P. lemoignei. The phaZ1 gene product, poly(3-hydroxybutyric acid) depolymerase C, was partially purified from recombinant E. coli (pUC91::phaZ1). The purified protein was specific for poly(hydroxyalkanoic acid) consisting of monomers of four or five carbon atoms and for p-nithrophenylbutyrate as substrates. The polymer-hydrolyzing activity, but not the p-nitrophenylate esterase activity, was inhibited by complex media such as Luria-Bertani medium and by soluble E. coli proteins. The enzyme protein did not cross-react with antibodies raised against purified poly(3-hydroxyvaleric acid) depolymerase of P. lemoignei.

Structural features of the Clostridium thermocellum cellulase SS gene

The Clostridium thermocellum cellulase SS is a subunit of the extracellular cellulase complex (cellulosome). It has previously been shown that SS, hydrolyzes crystalline cellulose synergistically with another subunit, SL. To study this synergism further, the authors cloned the gene coding for SS (celS) and compared its sequence to other known cel genes. The celS, although unique in its DNA sequence, has many structural features similar to those found in other cel genes. These features include a ribosome biding site, signal peptide sequence, the existence of a conserved reiterated amino acid sequence, and a palindromic structure downstream from its open reading frame.

Nucleotide sequence of the celG gene of Clostridium thermocellum and characterization of its product, endoglucanase CelG

The nucleotide sequence of the celG gene of Clostridium thermocellum, encoding endoglucanase CelG, was determined. The open reading frame extended over 1,698 bp and encoded a 566-amino-acid polypeptide (molecular weight of 63,128) similar to the C. thermocellum endoglucanase CelB (51.5% identical residues). The N terminus displayed a typical signal peptide, followed by a catalytic domain. The C terminus, which was separated from the catalytic domain by a 25-amino-acid segment rich in Pro, Thr, and Ser, contained two conserved stretches of 22 amino acids closely similar to those previously described in other cellulases from the same organism. Expression of the gene in Escherichia coli was increased by fusing the fragment coding for the catalytic domain in frame with the start of the lacZ' gene present in the vector. A low- and a high-M(r) form of the protein were purified. The two forms displayed identical enzymatic properties. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis showed that both forms consist of a major polypeptide of M(r) 50,000 and two minor polypeptides of M(r)s 49,000 and 48,000, resulting from heterogeneous proteolytic cleavage at the C terminus. An antiserum raised against the forms purified from E. coli reacted with an immunoreactive polypeptide of M(r) 66,000, which was associated with the extracellular cellulolytic complex of C. thermocellum known as the cellulosome.

Cloning and DNA sequence of the gene coding for Clostridium thermocellum cellulase Ss (CelS), a major cellulosome component

Clostridium thermocellum ATCC 27405 produces an extracellular cellulase system capable of hydrolyzing crystalline cellulose. The enzyme system involves a multicomponent protein aggregate (the cellulosome) with a total molecular weight in the millions, impeding mechanistic studies. However, two major components of the aggregate, SS (M(r) = 82,000) and SL (M(r) = 250,000), which act synergistically to hydrolyze crystalline cellulose, have been identified (J. H. D. Wu, W. H. Orme-Johnson, and A. L. Demain, Biochemistry 27:1703-1709, 1988). To further study this synergism, we cloned and sequenced the gene (celS) coding for the SS (CelS) protein by using a degenerate, inosine-containing oligonucleotide probe whose sequence was derived from the N-terminal amino acid sequence of the CelS protein. The open reading frame of celS consisted of 2,241 bp encoding 741 amino acid residues. It encoded the N-terminal amino acid sequence and two internal peptide sequences determined for the native CelS protein. A putative ribosome binding site was identified at the 5' end of the gene. A putative signal peptide of 27 amino acid residues was adjacent to the N terminus of the CelS protein. The predicted molecular weight of the secreted protein was 80,670. The celS gene contained a conserved reiterated sequence encoding 24 amino acid residues found in proteins encoded by many other clostridial cel or xyn genes. A palindromic structure was found downstream from the open reading frame. The celS gene is unique among the known cel genes of C. thermocellum. However, it is highly homologous to the partial open reading frame found in C. cellulolyticum and in Caldocellum saccharolyticum, indicating that these genes belong to a new family of cel genes.

Purification and properties of two truncated endoglucanases produced in Escherichia coli harbouring Clostridium cellulolyticum endoglucanase gene celCCD

The endoglucanase gene, celCCD, of Clostridium cellulolyticum has been expressed in Escherichia coli. Multiple active polypeptides were detected in the E. coli cells. The relative molecular mass (M(r)) of two major active polypeptides were 56,000 (D56) and 38,000 (D38), which were smaller than the deduced M(r) of the mature protein (63,401). D56 and D38 were purified from the periplasmic fraction. The N-terminal sequences of the two purified polypeptides were identical to that of the mature endoglucanase (Ala-Ile-Asn-Ser-Gln-Asp-Met-Val---) deduced from the nucleotide sequence. These data indicated that these polypeptides were produced by processing the original mature protein in the C-terminal region. The enzymatic properties of these two polypeptides were very similar, except that the specific activity of D38 was 2-3.5-fold higher than that of D56, and D38 was more heat stable than D56.

Cellulose degradation by Clostridium thermocellum: from manure to molecular biology

Clostridium thermocellum, a Gram-positive, thermophilic anaerobe produces a highly active cellulase system. This system, termed the cellulosome, is a complex composed of at least 14-18 different types of components organized around a large, cellulose-binding protein. Combining recombinant DNA technology and protein biochemistry has proved to be a successful approach in unravelling some important features of the system.