Isolation and characterization of a cellulose-growth-specific gene from Agaricus bisporus

Lytic polysaccharide monooxygenases (LPMOs) producing microbes: A novel approach for rapid recycling of agricultural wastes

Out of the huge quantity of agricultural wastes produced globally, rice straw is one of the most abundant ligno-cellulosic waste. For efficient utilization of these wastes, several cost-effective biological processes are available. The practice of field level in-situ or ex-situ decomposition of rice straw is having less degree of adoption due to its poor decomposition ability within a short time span between rice harvest and sowing of the next crop. Agricultural wastes including rice straw are in general utilized by using lignocellulose degrading microbes for industrial metabolite or compost production. However, bioconversion of crystalline cellulose and lignin present in the waste, into simple molecules is a challenging task. To resolve this issue, researchers have identified a novel new generation microbial enzyme i.e., lytic polysaccharide monooxygenases (LPMOs) and reported that the combination of LPMOs with other glycolytic enzymes are found efficient. This review explains the progress made in LPMOs and their role in lignocellulose bioconversion and the possibility of exploring LPMOs producers for rapid decomposition of agricultural wastes. Also, it provides insights to identify the knowledge gaps in improving the potential of the existing ligno-cellulolytic microbial consortium for efficient utilization of agricultural wastes at industrial and field levels.

Recent Advances in Screening Methods for the Functional Investigation of Lytic Polysaccharide Monooxygenases

Lytic polysaccharide monooxygenase (LPMO) is a newly discovered and widely studied enzyme in recent years. These enzymes play a key role in the depolymerization of sugar-based biopolymers (including cellulose, hemicellulose, chitin and starch), and have a positive significance for biomass conversion. LPMO is a copper-dependent enzyme that can oxidize and cleave glycosidic bonds in cellulose and other polysaccharides. Their mechanism of action depends on the correct coordination of copper ions in the active site. There are still difficulties in the analysis of LPMO activity, which often requires multiple methods to be used in concert. In this review, we discussed various LPMO activity analysis methods reported so far, including mature mass spectrometry, chromatography, labeling, and indirect measurements, and summarized the advantages, disadvantages and applicability of different methods.

Bioprospecting of microbial strains for biofuel production: metabolic engineering, applications, and challenges

The issues of global warming, coupled with fossil fuel depletion, have undoubtedly led to renewed interest in other sources of commercial fuels. The search for renewable fuels has motivated research into the biological degradation of lignocellulosic biomass feedstock to produce biofuels such as bioethanol, biodiesel, and biohydrogen. The model strain for biofuel production needs the capability to utilize a high amount of substrate, transportation of sugar through fast and deregulated pathways, ability to tolerate inhibitory compounds and end products, and increased metabolic fluxes to produce an improved fermentation product. Engineering microbes might be a great approach to produce biofuel from lignocellulosic biomass by exploiting metabolic pathways economically. Metabolic engineering is an advanced technology for the construction of highly effective microbial cell factories and a key component for the next-generation bioeconomy. It has been extensively used to redirect the biosynthetic pathway to produce desired products in several native or engineered hosts. A wide range of novel compounds has been manufactured through engineering metabolic pathways or endogenous metabolism optimizations by metabolic engineers. This review is focused on the potential utilization of engineered strains to produce biofuel and gives prospects for improvement in metabolic engineering for new strain development using advanced technologies.

Magnaporthe oryzae Auxiliary Activity Protein MoAa91 Functions as Chitin-Binding Protein To Induce Appressorium Formation on Artificial Inductive Surfaces and Suppress Plant Immunity

The appressoria that are generated by the rice blast fungus Magnaporthe oryzae in response to surface cues are important for successful colonization. Previous work showed that regulators of G-protein signaling (RGS) and RGS-like proteins play critical roles in appressorium formation. However, the mechanisms by which these proteins orchestrate surface recognition for appressorium induction remain unclear. Here, we performed comparative transcriptomic studies of ΔMorgs mutant and wild-type strains and found that M. oryzae Aa91 (MoAa91), a homolog of the auxiliary activity family 9 protein (Aa9), was required for surface recognition of M. oryzae We found that MoAA91 was regulated by the MoMsn2 transcription factor and that its disruption resulted in defects in both appressorium formation on the artificial inductive surface and full virulence of the pathogen. We further showed that MoAa91 was secreted into the apoplast space and was capable of competing with the immune receptor chitin elicitor-binding protein precursor (CEBiP) for chitin binding, thereby suppressing chitin-induced plant immune responses. In summary, we have found that MoAa91 is a novel signaling molecule regulated by RGS and RGS-like proteins and that MoAa91 not only governs appressorium development and virulence but also functions as an effector to suppress host immunity.IMPORTANCE The rice blast fungus Magnaporthe oryzae generates infection structure appressoria in response to surface cues largely due to functions of signaling molecules, including G-proteins, regulators of G-protein signaling (RGS), mitogen-activated protein (MAP) kinase pathways, cAMP signaling, and TOR signaling pathways. M. oryzae encodes eight RGS and RGS-like proteins (MoRgs1 to MoRgs8), and MoRgs1, MoRgs3, MoRgs4, and MoRgs7 were found to be particularly important in appressorium development. To explore the mechanisms by which these proteins regulate appressorium development, we have performed a comparative in planta transcriptomic study and identified an auxiliary activity family 9 protein (Aa9) homolog that we named MoAa91. We showed that MoAa91 was secreted from appressoria and that the recombinant MoAa91 could compete with a chitin elicitor-binding protein precursor (CEBiP) for chitin binding, thereby suppressing chitin-induced plant immunity. By identifying MoAa91 as a novel signaling molecule functioning in appressorium development and an effector in suppressing host immunity, our studies revealed a novel mechanism by which RGS and RGS-like proteins regulate pathogen-host interactions.

Distinct Substrate Specificities and Electron-Donating Systems of Fungal Lytic Polysaccharide Monooxygenases

Lytic polysaccharide monooxygenases (LPMOs) are powerful enzymes that oxidatively cleave glycosidic bonds in polysaccharides. The ability of these copper enzymes to boost the degradation of lignocellulose has greatly stimulated research efforts and biocatalytic applications within the biorefinery field. Initially found as oxidizing recalcitrant substrates, such as chitin and cellulose, it is now clear that LPMOs cleave a broad range of oligo- and poly-saccharides and make use of various electron-donating systems. Herein, substrate specificities and electron-donating systems of fungal LPMOs are summarized. A closer look at LPMOs as part of the fungal enzyme machinery might provide insights into their role in fungal growth and plant-pathogen interactions to further stimulate the search for novel LPMO applications.

Oxygen Activation by Cu LPMOs in Recalcitrant Carbohydrate Polysaccharide Conversion to Monomer Sugars

Natural carbohydrate polymers such as starch, cellulose, and chitin provide renewable alternatives to fossil fuels as a source for fuels and materials. As such, there is considerable interest in their conversion for industrial purposes, which is evidenced by the established and emerging markets for products derived from these natural polymers. In many cases, this is achieved via industrial processes that use enzymes to break down carbohydrates to monomer sugars. One of the major challenges facing large-scale industrial applications utilizing natural carbohydrate polymers is rooted in the fact that naturally occurring forms of starch, cellulose, and chitin can have tightly packed organizations of polymer chains with low hydration levels, giving rise to crystalline structures that are highly recalcitrant to enzymatic degradation. The topic of this review is oxidative cleavage of carbohydrate polymers by lytic polysaccharide mono-oxygenases (LPMOs). LPMOs are copper-dependent enzymes (EC 1.14.99.53-56) that, with glycoside hydrolases, participate in the degradation of recalcitrant carbohydrate polymers. Their activity and structural underpinnings provide insights into biological mechanisms of polysaccharide degradation.

Multiscale Modelling of Lytic Polysaccharide Monooxygenases

Lytic polysaccharide monooxygenase (LPMO) enzymes have attracted considerable attention owing to their ability to enhance polysaccharide depolymerization, making them interesting with respect to production of biofuel from cellulose. LPMOs are metalloenzymes that contain a mononuclear copper active site, capable of activating dioxygen. However, many details of this activation are unclear. Some aspects of the mechanism have previously been investigated from a computational angle. Yet, either these studies have employed only molecular mechanics (MM), which are inaccurate for metal active sites, or they have described only the active site with quantum mechanics (QM) and neglected the effect of the protein. Here, we employ hybrid QM and MM (QM/MM) methods to investigate the first steps of the LPMO mechanism, which is reduction of Cu^II to Cu^I and the formation of a Cu^II-superoxide complex. In the latter complex, the superoxide can bind either in an equatorial or an axial position. For both steps, we obtain structures that are markedly different from previous suggestions, based on small QM-cluster calculations. Our calculations show that the equatorial isomer of the superoxide complex is over 60 kJ/mol more stable than the axial isomer because it is stabilized by interactions with a second-coordination-sphere glutamine residue, suggesting a possible role for this residue. The coordination of superoxide in this manner agrees with recent experimental suggestions.

Alteration in the ultrastructural morphology of mycelial hyphae and the dynamics of transcriptional activity of lytic enzyme genes during basidiomycete morphogenesis

The morphogenesis of macromycetes is a complex multilevel process resulting in a set of molecular-genetic, physiological-biochemical, and morphological-ultrastructural changes in the cells. When the xylotrophic basidiomycetes Lentinus edodes, Grifola frondosa, and Ganoderma lucidum were grown on wood waste as the substrate, the ultrastructural morphology of the mycelial hyphal cell walls differed considerably between mycelium and morphostructures. As the macromycetes passed from vegetative to generative development, the expression of the tyr1, tyr2, chi1, chi2, exg1, exg2, and exg3 genes was activated. These genes encode enzymes such as tyrosinase, chitinase, and glucanase, which play essential roles in cell wall growth and morphogenesis.

Cellulose degradation by polysaccharide monooxygenases

Polysaccharide monooxygenases (PMOs), also known as lytic PMOs (LPMOs), enhance the depolymerization of recalcitrant polysaccharides by hydrolytic enzymes and are found in the majority of cellulolytic fungi and actinomycete bacteria. For more than a decade, PMOs were incorrectly annotated as family 61 glycoside hydrolases (GH61s) or family 33 carbohydrate-binding modules (CBM33s). PMOs have an unusual surface-exposed active site with a tightly bound Cu(II) ion that catalyzes the regioselective hydroxylation of crystalline cellulose, leading to glycosidic bond cleavage. The genomes of some cellulolytic fungi contain more than 20 genes encoding cellulose-active PMOs, suggesting a diversity of biological activities. PMOs show great promise in reducing the cost of conversion of lignocellulosic biomass to fermentable sugars; however, many questions remain about their reaction mechanism and biological function. This review addresses, in depth, the structural and mechanistic aspects of oxidative depolymerization of cellulose by PMOs and considers their biological function and phylogenetic diversity.

Cloning and analysis of a functional promoter of fungal immunomodulatory protein from Flammulina velutipes

Fugal immunomodulatory protein from Flammulina velutipes (FIP-fve) belongs to FIPs family, which has precious pharmaceutical value. To understand the regulatory mechanism of FIP-fve expression, we have cloned a 900 bp genomic DNA fragment from the transcriptional start site of the FIP-fve gene using genomic walker technology. Sequence analysis showed the presence of several eukaryotic transcription factor binding motifs in the 900 bp of upstream region of the FIP-fve gene, which contains one putative TATA-boxes, four possible CAAT-boxes, one ABRE, one ARE, three CGTCA-motifs, two TGA-elements and four Skn-1 motifs. The eukaryotic expression vector pfveP:: GUS-GFP was transferred into tobacco via an agrobacterium-mediated leaf disc transformation. The results showed that the FIP-fve promoter could induce the reporter gene GUS or GFP expression in different tissues of tobaccos. This study would lay a foundation for expression regulation of FIP-fve and development of genetic-modified plant products.

Cloning and Sequence Analysis of Endoglucanase Genes from an Industrial Fungus,Aspergillus kawachii

Three endoglucanase genes (cel5A, cel5B, and cel61A) were cloned from an industrial fungus, Aspergillus kawachii. Yeasts transformed with these cDNAs showed endoglucanase activity in medium. Cel5A and Cel61A contained a type 1 cellulose-binding domain (CBD1) at the C-terminus of the enzyme. The putative catalytic regions of Cel5A and Cel5B showed homology with various endoglucanases belonging glycosyl hydrolase family 5 (GH5). Cel5B showed high homology with Cel5A in catalytic region, but it lacked CBD1 and linker. The cel5A contained four introns, whereas cel5B contained five introns. The putative catalytic region of Cel61A showed homology with enzymes belonging to GH61. The cel61A contained no introns.

A structural overview of GH61 proteins - fungal cellulose degrading polysaccharide monooxygenases

Recent years have witnessed a spurt of activities in the elucidation of the molecular function of a class of proteins with great potential in biomass degradation. GH61 proteins are of fungal origin and were originally classified in family 61 of the glycoside hydrolases. From the beginning they were strongly suspected to be involved in cellulose degradation because of their expression profiles, despite very low detectable endoglucanase activities. A major breakthrough came from structure determination of the first members, establishing the presence of a divalent metal binding site and a similarity to bacterial proteins involved in chitin degradation. A second breakthrough came from the identification of cellulase boosting activity dependent on the integrity of the metal binding site. Finally very recently GH61 proteins were demonstrated to oxidatively cleave crystalline cellulose in a Cu and reductant dependant manner. This mini-review in particular focuses on the contribution that structure elucidation has made in the understanding of GH61 molecular function and reviews the currently known structures and the challenges remaining ahead for exploiting this new class of enzymes to the full.

The putative endoglucanase PcGH61D from Phanerochaete chrysosporium is a metal-dependent oxidative enzyme that cleaves cellulose

Many fungi growing on plant biomass produce proteins currently classified as glycoside hydrolase family 61 (GH61), some of which are known to act synergistically with cellulases. In this study we show that PcGH61D, the gene product of an open reading frame in the genome of Phanerochaete chrysosporium, is an enzyme that cleaves cellulose using a metal-dependent oxidative mechanism that leads to generation of aldonic acids. The activity of this enzyme and its beneficial effect on the efficiency of classical cellulases are stimulated by the presence of electron donors. Experiments with reduced cellulose confirmed the oxidative nature of the reaction catalyzed by PcGH61D and indicated that the enzyme may be capable of penetrating into the substrate. Considering the abundance of GH61-encoding genes in fungi and genes encoding their functional bacterial homologues currently classified as carbohydrate binding modules family 33 (CBM33), this enzyme activity is likely to turn out as a major determinant of microbial biomass-degrading efficiency.

Purification of exo-1,3-beta-glucanase, a new extracellular glucanolytic enzyme from Talaromyces emersonii

The moderately thermophilic aerobic ascomycete Talaromyces emersonii secretes, under selected growth conditions, several β-glucan hydrolases including an exo-1,3-β-glucanase. This enzyme was purified to apparent homogeneity in order to characterise its biochemical properties and investigate hydrolysis of different β-glucans, including laminaran, a 1,3-β-glucan from brown algae. The native enzyme is monomeric with a molecular mass of ~40 kDa and a pI value of 4.3, and is active over broad ranges of pH and temperature, with optimum activity observed at pH 5.4 and 65 °C. At pH 5.0, the enzyme displays strict specificity for laminaran (apparent K(m) 1.66 mg mL⁻¹; V(max) 7.69 IU mL⁻¹) and laminari-oligosaccharides and did not yield activity against 1,4-β-glucans, 1,3;1,4-β-glucans or 4-nitrophenyl- and methylumbelliferyl-β-D: -glucopyranosides. Analysis of hydrolysis products formed during time-course hydrolysis of laminaran by high-performance anion exchange chromatography with pulsed amperometric detection revealed a strict exo mode of action, with glucose being the sole reaction product even at the initial stages of hydrolysis. The T. emersonii exo-1,3-β-glucanase was inhibited by glucono-δ-lactone (K(i) 1.25 mM) but at significantly higher concentrations than typically inhibitory for exo-glycosidases such as β-glucosidase. 'De novo' sequence analysis of the purified enzyme suggests that it belongs to family GH5 of the glycosyl hydrolase superfamily. The results clearly show that the exo-1,3-β-glucanase is yet another novel enzyme present in the β-glucanolytic enzyme system of T. emersonii.

An expanded genetic linkage map of an intervarietal Agaricus bisporus var. bisporusxA. bisporus var. burnettii hybrid based on AFLP, SSR and CAPS markers sheds light on the recombination behaviour of the species

A genetic linkage map for the edible basidiomycete Agaricus bisporus was constructed from 118 haploid homokaryons derived from an intervarietal A. bisporus var. bisporus x A. bisporus var. burnettii hybrid. Two hundred and thirty-one AFLP, 21 SSR, 68 CAPS markers together with the MAT, BSN, PPC1 loci and one allozyme locus (ADH) were evenly spread over 13 linkage groups corresponding to the chromosomes of A. bisporus. The map covers 1156cM, with an average marker spacing of 3.9cM and encompasses nearly the whole genome. The average number of crossovers per chromosome per individual is 0.86. Normal recombination over the entire genome occurs in the heterothallic variety, burnettii, contrary to the homothallic variety, bisporus, which showed adaptive genome-wide suppressed recombination. This first comprehensive genetic linkage map for A. bisporus provides foundations for quantitative trait analyses and breeding programme monitoring, as well as genome organisation studies.

Cloning of multiple cellulase cDNAs fromVolvariella volvaceaand their differential expression during substrate colonization and fruiting

We used PCR-based methods to clone and sequence four previously unidentified cellulase cDNAs: cbhI-I, cbhI-II, cbhII-I and egII. CbhI-I, cbhI-II and cbhII-I consist of 1710, 1610 and 1453 bp, respectively, and encode for 512, 458 and 442 amino acids, respectively. EgII consists of 1180 bp encoding for 310 amino acids, and belongs to family 61 of the glycosyl hydrolases. CbhI-I, cbhII-I and egII all have a modular structure, with the catalytic domain (CD) and cellulose-binding domain (CBD) located at the C-terminus in cbhI-I and egII, and at the N-terminus in cbhII-I. CbhI-II shows high homology to cbhI-I but lacks a CBD. Northern blotting revealed that cbhI-I, cbhI-II and cbhII-I were coordinately expressed at various stages of the mushroom developmental cycle (substrate colonization to mature fruit body), although the number of cbhI-I transcripts was much smaller. No egII expression was detectable during the substrate colonization phase but transcription levels increased as fruit body morphogenesis progressed.

Efficient GFP expression in the mushrooms Agaricus bisporus and Coprinus cinereus requires introns

We have developed a "Molecular Toolkit" comprising interchangeable promoters and marker genes to facilitate transformation of homobasidiomycete mushrooms. We describe the evaluation of a range of promoters in the homobasidiomycetes Agaricus bisporus and Coprinus cinereus using green fluorescent protein (GFP) as a reporter gene; the C. cinereus trp1 promoter and A. bisporus trp2 and gpdII promoters proving successful in driving expression in C. cinereus, with the gpdII promoter also functioning in A. bisporus. Our investigations demonstrate that a prerequisite for GFP expression in C. cinereus and A. bisporus is the presence of an intron. This is the first reported expression of GFP in either C. cinereus or A. bisporus.

Transcriptional regulation of plant cell wall degradation by filamentous fungi

Plant cell wall consists mainly of the large biopolymers cellulose, hemicellulose, lignin and pectin. These biopolymers are degraded by many microorganisms, in particular filamentous fungi, with the aid of extracellular enzymes. Filamentous fungi have a key role in degradation of the most abundant biopolymers found in nature, cellulose and hemicelluloses, and therefore are essential for the maintenance of the global carbon cycle. The production of plant cell wall degrading enzymes, cellulases, hemicellulases, ligninases and pectinases, is regulated mainly at the transcriptional level in filamentous fungi. The genes are induced in the presence of the polymers or molecules derived from the polymers and repressed under growth conditions where the production of these enzymes is not necessary, such as on glucose. The expression of the genes encoding the enzymes is regulated by various environmental and cellular factors, some of which are common while others are more unique to either a certain fungus or a class of enzymes. This review summarises our current knowledge on the transcriptional regulation, focusing on the recently characterized transcription factors that regulate genes coding for enzymes involved in the breakdown of plant cell wall biopolymers.

Efficient isolation of genes differentially expressed on cellulose by suppression subtractive hybridization in Agaricus bisporus

The production of cellulases on minimal medium in the edible mushroom Agaricus bisporus is regulated by the carbon source: induced by cellulose and repressed by glucose. In order to isolate cellulose-growth specific sequences, a cDNA library from A. bisporus using suppression subtractive hybridization (SSH) was constructed. Northern blot analysis indicated that a high level of enrichment was achieved; 183 clones were isolated. A preliminary screen with cellulose-specific genes of A. bisporus (cel1, cel2, cel3 and cel4) using Southern hybridization resulted in 28 clones to be cel3, and 5 clones were cel2. The remaining 144 clones were sequenced. Partial sequences of the following genes were found: a beta-glucosidase homologue of the blvk gene of Kluyveromyces marxianus; a cellulase homologue of an endoglucanase (avicellase III) of Aspergillus aculeatus, four different xylanases homologue of the xyn genes of different fungi, and one hexose transporter homologue to the hxtA gene of Aspergillus parasiticus. The apparent full-length of two hydrophobins homologue to the abh3 gene of A. bisporus and one histone homologue to the h2a gene of Aspergillus niger were also found. The remaining sequences did not have homology to any known genes.

Agaricus bisporus and Coprinus bilanatus TRP2 genes are tri-functional with conserved intron and domain organisations

Cloned homobasidiomycete TRP2 genes for Agaricus bisporus and Coprinus bilanatus were sequence-characterised. Both genes encode tri-functional proteins with activity domains for glutamine amidotransferase (GAT; G domain), indole glycerol phosphate synthase (InGP; C domain) and phosphoribosyl anthranilate isomerase (F domain). A conserved intron disrupts the GAT-coding sequence in both genes. Consensus amino acid (aa) signatures were identified for GAT and InGP, but in the latter 15-aa signature, one residue did not fit the previously defined consensus. Protein architecture and parsimony analysis with analogous proteins indicate domain organisation (NH(2)-G-C-F-COOH) was as for other filamentous fungi. The data do not support earlier suggestions that the three activity domains are detached in A. bisporus.

Cloning and characterization of two cellulase genes from Lentinula edodes

Lentinula edodes has traditionally been grown on fallen logs. It produces a wide array of enzymes to digest the lignocellulolytic substrate for nutrients. Thus, this organism represents a rich source of potentially potent lignocellulolytic enzymes that can be harnessed for conversion of biomass to simple sugars. These sugars can then be used as feedstock for ethanol production or other chemical syntheses. We have cloned two cellulase genes from L. edodes grown on a wood substrate without the use of genomic or cDNA libraries by using a PCR-based strategy employing degenerate primers directed at the cellulose-binding domain. cel7A encoded a 516-amino acid protein that belonged to glycosyl hydrolase family 7 and had sequence similarities to cbhI genes from other fungi. cel6B encoded a 444-amino acid protein that belonged to glycosyl hydrolase family 6 and had sequence similarities to cbhII genes from other fungi. We demonstrated that cel7A and cel6B transcript levels were positively correlated to L. edodes growth in the presence of crystalline cellulose.

Homologous expression and characterization of Cel61A (EG IV) of Trichoderma reesei

There are currently four proteins in family 61 of the glycoside hydrolases, from Trichoderma reesei, Agaricus bisporus, Cryptococcus neoformans and Neurospora crassa. The enzymatic activity of these proteins has not been studied thoroughly. We report here the homologous expression and purification of T. reesei Cel61A [previously named endoglucanase (EG) IV]. The enzyme was expressed in high amounts with a histidine tag on the C-terminus and purified by metal affinity chromatography. This is the first time that a histidine tag has been used as a purification aid in the T. reesei expression system. The enzyme activity was studied on a series of carbohydrate polymers. The only activity exhibited by Cel61A was an endoglucanase activity observed on substrates containing beta-1,4 glycosidic bonds, e.g. carboxymethylcellulose (CMC), hydroxyethylcellulose (HEC) and beta-glucan. The endoglucanase activity on CMC and beta-glucan was determined by viscosity analysis, by measuring the production of reducing ends and by following the degradation of the polymer on a size exclusion chromatography system. The formation of soluble sugars by Cel61A from microcrystalline cellulose (Avicel; Merck), phosphoric acid swollen cellulose (PASC), and CMC were analysed on a HPLC system. Cel61A produced small amounts of oligosaccharides from these substrates. Furthermore, Cel61A showed activity against cellotetraose and cellopentaose. The activity of Cel61A was several orders of magnitude lower compared to Cel7B (previously EG I) of T. reesei on all substrates. One significant difference between Cel61A and Cel7B was that cellotriose was a poor substrate for Cel61A but was readily hydrolysed by Cel7B. The enzyme activity for Cel61A was further studied on a large number of carbohydrate substrates but the enzyme showed no activity towards any of these substrates.

The cel4 gene of Agaricus bisporus encodes a beta-mannanase

Mannases have industrial uses in food and pulp industries, and their regulation may influence development of the mushrooms of commercially important basidiomycetes. We expressed an Agaricus bisporus cel4 cDNA, which encodes a mannanase, in Saccharomyces cerevisiae and Pichia pastoris. CEL4 had no detectable activity on cellulose or xylan. This gene is the first isolated from this economically important fungus to encode a mannanase. P. pastoris secreted about three times more CEL4 than S. cerevisiae. The removal of the cellulose-binding domain of CEL4 lowered the secreted specific activity by P. pastoris by approximately 97%. The genomic sequence of cel4 was isolated by screening a cosmid library of A. bisporus C54-carb8. The open reading frame was interrupted by 12 introns. The level of extracellular CEL4 increases dramatically at the postharvest stage in compost extracts of A. bisporus fruiting cultures. In laboratory liquid cultures of A. bisporus, the activity of CEL4 detected in the culture filtrate reached a maximum after 21 days. The levels of CEL4 broadly mirrored the levels of enzyme activity. In the Solka floc-bound mycelium, CEL4 protein showed a maximum after 2 to 3 weeks of culture and then declined. Changes in CEL4 activity during fruiting-body development suggest that hemicellulose utilization plays an important role in sporophore formation. The availability of the cloned gene will further studies of compost decomposition and the extracellular enzymes that fungi deploy in this process.

The molecular genetics of cultivated mushrooms

The types, economic significance and methods of production of the principal cultivated mushrooms are described in outline. These organisms are all less than ideal for conventional genetic analysis and breeding, so molecular methods afford a particular opportunity to advance our understanding of their biology and potentially give the prospect of improvement by gene manipulation. The sequences described are limited to those found in GenBank by August 1999. The gene sequences isolated from the white button mushroom Agaricus bisporus, the shiitake Lentinula edodes, the oyster mushrooms Pleurotus spp., the paddy straw mushroom Volvariella volvacea and the enotake Flammulina velutipes are described. The largest group are genes from A. bisporus, which includes 29 for intracellular proteins and 12 for secreted proteins. In comparison, only a total of 26 sequences can be reported for the other cultivated species. A. bisporus is also the only cultivated species for which molecular karyotyping is already supported by reliable markers for all 13 of its chromosomes.

Isolation of the third capsule-associated gene, CAP60, required for virulence in Cryptococcus neoformans

A polysaccharide capsule is one of the most important virulence factors for the pathogenic fungus Cryptococcus neoformans. We previously characterized two capsule-associated genes, CAP59 and CAP64. To further dissect the molecular mechanism of capsule synthesis, 16 acapsular mutants induced by 4-nitroquinoline-1-oxide were obtained. The acapsular phenotype of one of these mutants was complemented. The cloned gene was designated CAP60, and deletion of this newly described capsule-associated gene resulted in an acapsular phenotype. The proposed 67-kDa Cap60p contains 592 amino acids and appears to have a putative transmembrane domain close to the N terminus. DNA sequence analysis revealed that CAP60 has similarity to CAP59 at the center portion of its coding regions. Contour-clamped homogeneous electric field blot analysis suggested that these two genes are on the same chromosome. CAP60 and CAP59, however, could not be functionally substituted for each other by direct complementation or by domain swap experiments. In addition, CAP60 is closely linked to a gene which is similar to a cellulose growth-specific gene of Agaricus bisporus, CEL1. Immunogold electron microscopy studies of the epitope-tagged CAP60 gene revealed that Cap60p was primarily localized to the nuclear membrane. Animal model studies indicated that CAP60 is essential for virulence. Thus, CAP60 is required for both capsule formation and virulence.

Tandem organization and highly disparate expression of the two laccase genes lcc1 and lcc2 in the cultivated mushroom Agaricus bisporus

Two non-allelic laccase genes (lcc1 and lcc2) in Agaricus bisporus have been mapped to the same cosmid clone and are close together, in tandem. The intergenic region consists of 1562 bp between the stop codon of lcc1 and the start codon of lcc2. Differences between the 5' non-coding regions of the two genes suggest the potential for their differential regulation. By employing competitive RT-PCR and specific primer pairs that discriminate between lcc1 and lcc2, it has been shown that the level of lcc2 mRNA is approximately 300 times higher than that of lcc1 mRNA in malt extract liquid cultures; in compost cultures lcc2 mRNA is almost 7000 times more abundant than lcc1 mRNA.

cDNA cloning of a Trichoderma reesei cellulase and demonstration of endoglucanase activity by expression in yeast

A Trichoderma reesei cDNA encoding a previously unknown protein with a C-terminal cellulose-binding domain was obtained by complementation screening of a T. reesei cDNA library in a sec1 yeast mutant impaired in protein secretion. The T. reesei protein shows amino acid similarity over its entire length to the Agaricus bisporus cellulose-induced protein CEL1 whose function is not known. These two proteins form a new glycosyl hydrolase family, number 61. Expression of the T. reesei cDNA in yeast showed that it encoded a protein with endoglucanase activity and thus the protein was named EGIV and the corresponding gene egl4. Polyclonal antibodies were prepared against EGIV produced in Escherichia coli and detected a 56-kDa protein in the T. reesei culture supernatant. Northern hybridisation revealed that T. reesei egl4 is regulated in the same manner as other cellulase genes of this fungus.

Expression of CEL2 and CEL4, two proteins from Agaricus bisporus with similarity to fungal cellobiohydrolase I and beta-mannanase, respectively, is regulated by the carbon source

Two new cellulose-growth specific (cel) cDNAs, cel2 and cel4, have been isolated from an Agaricus bisporus cDNA expression library by immunoscreening with an A. bisporus anti-'endoglucanase' antibody. The deduced amino acid sequences showed that both CEL2 and CEL4 proteins have a modular structure consisting of a fungal-type cellulose-binding domain (CBD) and a catalytic domain separated by a linker region rich in Pro, Ser and Thr. The CEL2 and CEL4 catalytic domains were homologous to fungal cellobiohydrolases (CBH) in family 7 and to fungal mannanases in family 5 of the glycosyl hydrolases, respectively. A previously isolated cDNA derived from a constitutive gene was also sequenced. The deduced amino acid sequence corresponded to 5-aminolaevulinic acid synthase (ALA), the first enzyme in the haem biosynthetic pathway, and was most similar to other fungal ALAs. RNA analysis showed that the expression of cel2 and cel4 genes was induced by cellulose and repressed by glucose, fructose and lactose. The soluble cellulose derivative CM-cellulose induced mRNA accumulation for cel1 but not cel2, cel3 or cel4. Mannitol, maltose, sorbitol and glycerol decreased cel2 and cel4 mRNA levels to different extents. cel1, cel2, cel3 and cel4 mRNAs all disappeared after the addition of glucose with apparent half-lives of less than 20 min. Whether cel mRNAs have short half-lives or glucose affects the stability of cel transcripts remains to be investigated.

Isolation of expressed sequence tags of Agaricus bisporus and their assignment to chromosomes

The genome of the cultivated basidiomycete Agaricus bisporus Horst U1 and of its homokaryotic parents has been characterized by using an optimized method of pulsed-field gel electrophoresis. Expressed sequence tags obtained as expressed cDNAs from a primordial tissue-derived cDNA library and a number of previously isolated genes were used to identify the individual chromosomes of the parental lines of Horst U1. The genome consists of 13 chromosomes, and its total size is 31 Mb. For those chromosomes that could not be resolved by contour-clamped homogeneous electric field electrophoresis, the segregation of marker genes was studied in a set of 86 homokaryotic offspring of Horst U1. At least two markers were assigned to each individual chromosome. In this way all individual chromosomes were unequivocally identified. The large size difference observed between the homologous chromosomes IX, harboring the rDNA repeat, was shown to be largely due to a higher copy number of rDNA in parental strain H97 than in parental strain H39.

Breeding of edible fungi with emphasis on the variability among French genetic resources ofAgaricus bisporus

Our laboratory (INRA) has developed breeding programs for several species of edible fungi. For example, "sporeless" strains were obtained by mutagenesis for Pleurotus ostreatus and Pleurotus pulmonarius, a hybrid strain of Lepista nuda has been marketed, and genetic variability has been studied in Tuber melanosporum. At present, the largest program concerns Agaricus bisporus, for which a collection of about 200 French isolates from 44 sites has been gathered. High genetic polymorphism appeared even within each site. Nine genetically different isolates from the same site were studied in experimental culture. Variability was observed for color of the cap, susceptibility to bacterial blotch, and the elevated basidial spore number trait. A single isolate, Bs 261, gave sporocarps having a majority of tetrasporic basidia, and spores which, for the most part, were homokaryotic. This strain was interfertile with typical bisporic strains. The resulting hybrids were either bisporic or tetrasporic, according to which homokaryon of Bs 261 was used. More investigations will be necessary to understand the presence of a rare tetrasporic strain in a bisporic population and also to study the relationship between Bs 261 and the tetrasporic strains of the previously described A. bisporus var. burnettii. Key words: edible fungi, Agaricus bisporus, genetic resources, breeding, basidial spore number, tetrasporic trait.

Identification of functionally important amino acids in the cellulose-binding domain of Trichoderma reesei cellobiohydrolase I

Cellobiohydrolase I (CBHI) of Trichoderma reesei has two functional domains, a catalytic core domain and a cellulose binding domain (CBD). The structure of the CBD reveals two distinct faces, one of which is flat and the other rough. Several other fungal cellulolytic enzymes have similar two-domain structures, in which the CBDs show a conserved primary structure. Here we have evaluated the contributions of conserved amino acids in CBHI CBD to its binding to cellulose. Binding isotherms were determined for a set of six synthetic analogues in which conserved amino acids were substituted. Two-dimensional NMR spectroscopy was used to assess the structural effects of the substitutions by comparing chemical shifts, coupling constants, and NOEs of the backbone protons between the wild-type CBD and the analogues. In general, the structural effects of the substitutions were minor, although in some cases decreased binding could clearly be ascribed to conformational perturbations. We found that at least two tyrosine residues and a glutamine residue on the flat face were essential for tight binding of the CBD to cellulose. A change on the rough face had only a small effect on the binding and it is unlikely that this face interacts with cellulose directly.

The cel3 gene of Agaricus bisporus codes for a modular cellulase and is transcriptionally regulated by the carbon source

A 52-kDa protein, CEL3, has been separated from the culture filtrate of Agaricus bisporus during growth on cellulose. A PCR-derived probe was made, with a degenerate oligodeoxynucleotide derived from the amino acid sequence of a CEL3 CNBr cleavage product and was used to select cel3 cDNA clones from an A. bisporus cDNA library. Two allelic cDNAs were isolated. They showed 98.8% identity of their nucleotide sequences. The deduced amino acid sequence and domain architecture of CEL3 showed a high degree of similarity to those of cellobiohydrolase II of Trichoderma reesei. Functional expression of cel3 cDNA in Saccharomyces cerevisiae was achieved by placing it under the control of a constitutive promoter and fusing it to the yeast invertase signal sequence. Recombinant CEL3 secreted by yeast showed enzymatic activity towards crystalline cellulose. At long reaction times, CEL3 was also able to degrade carboxymethyl cellulose. Northern (RNA) analysis showed that cel3 gene expression was induced by cellulose and repressed by glucose, fructose, 2-deoxyglucose, and lactose. Glycerol, mannitol, sorbitol, and maltose were neutral carbon sources. Nuclear run-on analysis showed that the rate of synthesis of cel3 mRNA in cellulose-grown cultures was 13 times higher than that in glucose-grown cultures. A low basal rate of cel3 mRNA synthesis was observed in the nuclei isolated from glucose-grown mycelia.

Regulation of transcription of the cel1 gene in Agaricus bisporus

Northern analysis showed that accumulation of Agaricus bisporus cel1 mRNA was regulated by two independent mechanisms: (i) induction by cellulose; and (ii) repression by glucose and other sugars. Isolated A. bisporus nuclei were transcriptionally active. Nuclei isolated from cellulose-grown mycelium synthesized six times more cel1 mRNA than nuclei from glucose-grown mycelium. The start point of transcription (tsp) was identified by primer extension and S1 nuclease analysis. Putative glucose-, and cAMP-responsive elements as well as regions with homology to promoter regions of other fungal cellulase genes were detected both upstream and downstream from the tsp of the cel1 gene.

CEL1: a novel cellulose binding protein secreted by Agaricus bisporus during growth on crystalline cellulose

The cel1 gene of Agaricus bisporus encodes a protein (CEL1) that has an architecture resembling the multi-domain fungal cellulases, although the sequence of its putative catalytic core is not matched by any other in the protein and nucleic acid data bases. The N-terminal half of the putative catalytic domain of CEL1 was expressed in Escherichia coli as a fusion protein with glutathione-S-transferase. The fusion protein was used to raise a CEL1-specific antibody. CEL1 was detected as an extracellular 49.8 kDa protein in A. bisporus cellulose-grown cultures, where it bound strongly to cellulose. CEL1 was neither an endoglucanase, a cellobiohydrolase able to hydrolyze fluorogenic cellobiosides, a beta-glucosidase, a xylanase, nor a cellobiose: quinone oxidoreductase. CEL1 was present in some fractions of culture fluid separated by electrophoresis which released soluble sugars from crystalline cellulose.

An electrophoretic karyotype of the cultivated mushroom--Agaricus bisporus

Thirteen chromosomal-sized DNA bands of the cultivated mushroom Agaricus bisporus have been resolved using the method of clamped homogeneous electric field (CHEF) electrophoresis. Using chromosome size standards from Schizosaccharomyces pombe, Saccharomyces cerevisiae and Candida albicans, the estimated size of the chromosomal DNAs ranged from 3.5 to 1.2 megabase pairs (Mb). By Southern hybridization with homologous gene probes, the chromosomal location of cellulase and laccase genes have been mapped. In addition, rDNA has been assigned to chromosomal bands using a heterologous gene probe. Genomic rearrangement is suggested in the commercial heterokaryon, as indicated by the presence of non-comigrating homologous chromosomes, identified by a number of probes for particular DNA sequences.