DNA polymerase fluorescent substrates with reversible 3'-tags

Enhancing novel isoform discovery: leveraging nanopore long-read sequencing and machine learning approaches

Long-read sequencing technologies can capture entire RNA transcripts in a single sequencing read, reducing the ambiguity in constructing and quantifying transcript models in comparison to more common and earlier methods, such as short-read sequencing. Recent improvements in the accuracy of long-read sequencing technologies have expanded the scope for novel splice isoform detection and have also enabled a far more accurate reconstruction of complex splicing patterns and transcriptomes. Additionally, the incorporation and advancements of machine learning and deep learning algorithms in bioinformatic software have significantly improved the reliability of long-read sequencing transcriptomic studies. However, there is a lack of consensus on what bioinformatic tools and pipelines produce the most precise and consistent results. Thus, this review aims to discuss and compare the performance of available methods for novel isoform discovery with long-read sequencing technologies, with 25 tools being presented. Furthermore, this review intends to demonstrate the need for developing standard analytical pipelines, tools, and transcript model conventions for novel isoform discovery and transcriptomic studies.

Solving genomic puzzles: computational methods for metagenomic binning

Metagenomics involves the study of genetic material obtained directly from communities of microorganisms living in natural environments. The field of metagenomics has provided valuable insights into the structure, diversity and ecology of microbial communities. Once an environmental sample is sequenced and processed, metagenomic binning clusters the sequences into bins representing different taxonomic groups such as species, genera, or higher levels. Several computational tools have been developed to automate the process of metagenomic binning. These tools have enabled the recovery of novel draft genomes of microorganisms allowing us to study their behaviors and functions within microbial communities. This review classifies and analyzes different approaches of metagenomic binning and different refinement, visualization, and evaluation techniques used by these methods. Furthermore, the review highlights the current challenges and areas of improvement present within the field of research.

The chemistry of next-generation sequencing

The first large genome fully sequenced by next-generation sequencing (NGS) was that of a bacteriophage using sequencing by synthesis (SBS) as a paradigm. SBS in NGS is underpinned by 'reversible-terminator chemistry'. To grow from proof of concept to being both affordable and practical, SBS needed to overcome a series of challenges, each of which required the invention of new chemistries. These included the design and synthesis of unnatural deoxynucleotide triphosphates (dNTPs), engineering a suitable polymerase, a new surface chemistry and an ingenious molecular solution to neutralize copying errors inherent to all polymerases. In this historical Perspective, we discuss how NGS was developed from Sanger sequencing, highlighting the chemistry behind this technology, which has impacted biology in unprecedented ways.

Update on Potentially Zoonotic Viruses of European Bats

Bats have been increasingly gaining attention as potential reservoir hosts of some of the most virulent viruses known. Numerous review articles summarize bats as potential reservoir hosts of human-pathogenic zoonotic viruses. For European bats, just one review article is available that we published in 2014. The present review provides an update on the earlier article and summarizes the most important viruses found in European bats and their possible implications for Public Health. We identify the research gaps and recommend monitoring of these viruses.

Clip Chemistry: Diverse (Bio)(macro)molecular and Material Function through Breaking Covalent Bonds

In the two decades since the introduction of the "click chemistry" concept, the toolbox of "click reactions" has continually expanded, enabling chemists, materials scientists, and biologists to rapidly and selectively build complexity for their applications of interest. Similarly, selective and efficient covalent bond breaking reactions have provided and will continue to provide transformative advances. Here, we review key examples and applications of efficient, selective covalent bond cleavage reactions, which we refer to herein as "clip reactions." The strategic application of clip reactions offers opportunities to tailor the compositions and structures of complex (bio)(macro)molecular systems with exquisite control. Working in concert, click chemistry and clip chemistry offer scientists and engineers powerful methods to address next-generation challenges across the chemical sciences.

Algorithms for the selection of fluorescent reporters

Molecular biologists rely on the use of fluorescent probes to take measurements of their model systems. These fluorophores fall into various classes (e.g. fluorescent dyes, fluorescent proteins, etc.), but they all share some general properties (such as excitation and emission spectra, brightness) and require similar equipment for data acquisition. Selecting an ideal set of fluorophores for a particular measurement technology or vice versa is a multidimensional problem that is difficult to solve with ad hoc methods due to the enormous solution space of possible fluorophore panels. Choosing sub-optimal fluorophore panels can result in unreliable or erroneous measurements of biochemical properties in model systems. Here, we describe a set of algorithms, implemented in an open-source software tool, for solving these problems efficiently to arrive at fluorophore panels optimized for maximal signal and minimal bleed-through.

Vaidyanathan et al. present a heuristic algorithm for the selection of fluorescent reporters in the context of single-cell analysis. They present a tool to enable biologists to design multi-colour fluorophore panels based on specific equipment’s configurations. The authors demonstrate the efficacy of their algorithm by comparing computational predictions with experimental observations.

Species-Specific Interactions of Bacillus Innocula and Arbuscular Mycorrhizal Fungi Symbiosis with Winter Wheat

Arbuscular mycorrhizal (AM) fungi establish close interactions with host plants, an estimated 80% of vascular plant species. The host plant receives additional soil bound nutrients that would otherwise not be available. Other components of the microbiome, such as rhizobacteria, may influence interactions between AM fungi and the host plant. Within a commercial arable crop selected rhizobacteria in combination with AM fungi may benefit crop yields. The precise nature of interactions between rhizobacteria and AM fungi in a symbiotic relationship overall requires greater understanding. The present study aims to assess this relationship by quantifying: (1) AM fungal intracellular root structures (arbuscules) and soil glomalin as an indicator of AM fungal growth; and (2) root length and tiller number as a measure of crop growth, in response to inoculation with one of three species of Bacillus: B. amyloliquefaciences, B. pumilis, or B. subtilis. The influence of soil management, conventional (CT) or zero tillage (ZT) was a further variable evaluated. A significant (p < 0.0001) species-specific impact on the number of quantifiable AM fungal arbuscules was observed. The inoculation of winter wheat (Triticum aestivum) with B. amyloliquefaciences had a positive impact on AM fungal symbiosis, as indicated by an average of 3226 arbuscules per centimetre of root tissue. Bacillus subtilis increased root length significantly (p < 0.01) but decreased fungal symbiosis (p < 0.01). The inoculation of field soils altered the concentration of glomalin, an indicator of AM fungal growth, significantly (p < 0.00001) for each tillage treatment. The greatest increase was associated with B. amyloliquefaciences for both CT (p < 0.0001) and ZT (p < 0.00001). Bacillus subtilis reduced measured glomalin significantly in both tillage treatments (p < 0.0001 and p < 0.00001 for CT and ZT respectively). The interaction between rhizobacteria and AM fungi is variable, being beneficial or detrimental depending on species. This relationship was evident in both tillage treatments and has important implications for maximizing symbiosis in the crop plant-microbiome present in agricultural systems.

A Guide to Understanding "State-of-the-Art" Basic Research Techniques in Anesthesiology

Perioperative medicine is changing from a "protocol-based" approach to a progressively personalized care model. New molecular techniques and comprehensive perioperative medical records allow for detection of patient-specific phenotypes that may better explain, or even predict, a patient's response to perioperative stress and anesthetic care. Basic science technology has significantly evolved in recent years with the advent of powerful approaches that have translational relevance. It is incumbent on us as a primarily clinical specialty to have an in-depth understanding of rapidly evolving underlying basic science techniques to incorporate such approaches into our own research, critically interpret the literature, and improve future anesthesia patient care. This review focuses on 3 important and most likely practice-changing basic science techniques: next-generation sequencing (NGS), clustered regularly interspaced short palindromic repeat (CRISPR) modulations, and inducible pluripotent stem cells (iPSCs). Each technique will be described, potential advantages and limitations discussed, open questions and challenges addressed, and future developments outlined. We hope to provide insight for practicing physicians when confronted with basic science articles and encourage investigators to apply "state-of-the-art" technology to their future experiments.

Enzymatic Cleavage of 3'-Esterified Nucleotides Enables a Long, Continuous DNA Synthesis

The reversible dye-terminator (RDT)-based DNA sequencing-by-synthesis (SBS) chemistry has driven the advancement of the next-generation sequencing technologies for the past two decades. The RDT-based SBS chemistry relies on the DNA polymerase reaction to incorporate the RDT nucleotide (NT) for extracting DNA sequence information. The main drawback of this chemistry is the "DNA scar" issue since the removal of dye molecule from the RDT-NT after each sequencing reaction cycle leaves an extra chemical residue in the newly synthesized DNA. To circumvent this problem, we designed a novel class of reversible (2-aminoethoxy)-3-propionyl (Aep)-dNTPs by esterifying the 3'-hydroxyl group (3'-OH) of deoxyribonucleoside triphosphate (dNTP) and examined the NT-incorporation activities by A-family DNA polymerases. Using the large fragment of both Bacillus stearothermophilus (BF) and E. coli DNA polymerase I (KF) as model enzymes, we further showed that both proteins efficiently and faithfully incorporated the 3'-Aep-dNMP. Additionally, we analyzed the post-incorporation product of N + 1 primer and confirmed that the 3'-protecting group of 3'-Aep-dNMP was converted back to a normal 3'-OH after it was incorporated into the growing DNA chain by BF. By applying all four 3'-Aep-dNTPs and BF for an in vitro DNA synthesis reaction, we demonstrated that the enzyme-mediated deprotection of inserted 3'-Aep-dNMP permits a long, continuous, and scar-free DNA synthesis.

Comparative analysis of novel MGISEQ-2000 sequencing platform vs Illumina HiSeq 2500 for whole-genome sequencing

The MGISEQ-2000 developed by MGI Tech Co. Ltd. (a subsidiary of the BGI Group) is a new competitor of such next-generation sequencing platforms as NovaSeq and HiSeq (Illumina). Its sequencing principle is based on the DNB and the cPAS technologies, which were also used in the previous version of the BGISEQ-500 device. However, the reagents for MGISEQ-2000 have been refined and the platform utilizes updated software. The cPAS method is an advanced technology based on the cPAL previously created by Complete Genomics. In this paper, the authors compare the results of the whole-genome sequencing of a DNA sample from a Russian female donor performed on MGISEQ-2000 and Illumina HiSeq 2500 (both PE150). Two platforms were compared in terms of sequencing quality, number of errors and performance. Additionally, we performed variant calling using four different software packages: Samtools mpileaup, Strelka2, Sentieon, and GATK. The accuracy of SNP detection was similar in the data generated by MGISEQ-2000 and HiSeq 2500, which was used as a reference. At the same time, a separate indel analysis of the overall error rate revealed similar FPR values and lower sensitivity. It may be concluded with confidence that the data generated by the analyzed sequencing systems is characterized by comparable magnitudes of error and that MGISEQ-2000 and HiSeq 2500 can be used interchangeably for similar tasks like whole genome sequencing.

MALDI-TOF MS protein fingerprinting of mixed samples

Analytical techniques currently available for the characterization of mixtures of microorganisms are generally based on next-generation sequencing. Motivated to develop practical and less-expensive methods for characterizing such mixtures, we propose, as an alternative or complement, the use of matrix-assisted laser-desorption and ionization time-of-flight mass spectrometry (MALDI-TOF MS), which is capable of high-resolution discrimination between species and even between biotypes within species. Potential approaches employing this technique for such characterization are discussed along with impediments to their successful employment. As a consequence, our rationale has been to capitalize on the powerful algorithms currently available for spectral comparison. Following this rationale, the first priority is to ensure the generation of MALDI-TOF MS spectra from mixtures of microorganisms that contain manageable peak complexities and that can be handled by the existing spectral comparison algorithms, preferably with the option to archive and re-run sample preparations and to pipette replicates of these onto MALDI-TOF MS sample plates. The second priority is to ensure that database entry is comparably facile to sample preparation so that large databases of known microorganism mixture MALDI-TOF MS spectra could be readily prepared for comparison with the spectra of unknown mixtures. In this article, we address the above priorities and generate illustrative MALDI-TOF MS spectra to demonstrate the utility of this approach. In addition, we investigate methods aimed at chemically modulating the peak complexity of the obtained MALDI-TOF MS spectra.

MALDI-TOF MS-Based Analysis of Seed Proteins from Catalogue Varieties of Solanum lycopersicum/Lycopersicon esculentum

Matrix-assisted laser-desorption and ionization time-of-flight mass spectroscopy (MALDI-TOF MS) is a flexible technique for the analysis of protein-containing biological samples. Simple and inexpensive methods have previously been developed for MALDI-TOF MS sample preparation that are able to discriminate between Impatiens species that are closely related and also between regional biotypes of the invasive weed Impatiens glandulifera (Himalayan balsam) with leaf material and also seed material. The current article investigates whether MALDI-TOF MS, through acid-soluble protein ‘fingerprinting’, can be used to analyze plant seeds that result from intensive commercial plant-breeding activity. As an initial proof-of-concept study, tomato seeds from eleven seed-catalogue varieties (F1 Pink Baby Plum, F1 Fantasio, F1 Lizzano, F1 Sungold, F1 Tumbler, Faworyt, Golden Sunrise, Hundreds and Thousands, Indigo Rose, Moneymaker, and Red Alert), listed as Solanum lycopersicum or under the synonym Lycopersicon esculentum were analyzed using MALDI-TOF MS. Whilst peak-rich and highly-reproducible spectra were obtained, with very high Bruker comparison scores and low MALDI-TOF MS variance, sample-preparation variance, and seed-to-seed variance, the spectral differences between varieties were only slightly greater than the above combined variances, indicating very close similarity between all eleven varieties studied. These results are discussed in comparison with those previously observed with the naturally-evolving invasive species I. glandulifera.

Molecular genetic testing methodologies in hematopoietic diseases: current and future methods

INTRODUCTION

Rapid technological advancements in clinical molecular genetics have increased our diagnostic and prognostic capabilities in health care. Understanding these assays, as well as how they may change over time, is critical for pathologists, clinicians, and translational researchers alike.

METHODS

This review provides a practical summary and basic reference for current molecular genetic technologies, as well as new testing methodologies that are in use, gaining momentum, or anticipated to contribute more broadly in the future.

RESULTS

Here, we discuss DNA and RNA based methodologies including classic assays such as the polymerase chain reaction (PCR), Sanger sequencing, and microarrays, to more cutting-edge next-generation sequencing (NGS) based assays and emerging molecular technologies such as cell-free DNA (cfDNA) or circulating tumor DNA (ctDNA), and NGS-based detection of infectious disease organisms.

CONCLUSION

This review serves as a basic foundation for knowledge in current and emerging clinical molecular genetic technologies.

Thermococcus sp. 9°N DNA polymerase exhibits 3'-esterase activity that can be harnessed for DNA sequencing

It was reported in 1995 that T7 and Taq DNA polymerases possess 3'-esterase activity, but without follow-up studies. Here we report that the 3'-esterase activity is intrinsic to the Thermococcus sp. 9°N DNA polymerase, and that it can be developed into a continuous method for DNA sequencing with dNTP analogs carrying a 3'-ester with a fluorophore. We first show that 3'-esterified dNTP can be incorporated into a template-primer DNA, and solve the crystal structures of the reaction intermediates and products. Then we show that the reaction can occur continuously, modulated by active site residues Tyr409 and Asp542. Finally, we use 5'-FAM-labeled primer and esterified dNTP with a dye to show that the reaction can proceed to ca. 450 base pairs, and that the intermediates of many individual steps can be identified. The results demonstrate the feasibility of a 3'-editing based DNA sequencing method that could find practical applications after further optimization.

The utility and perspectives of NGS-based methods in BSL-3 and BSL-4 laboratory - sequencing and analysis strategies

Modern diagnostics is in general based on molecular biology methods. Nowadays sequencing-based methods, especially whole genome sequencing, are becoming increasingly important. Implementation of such methods into routine diagnostic of highly dangerous pathogens, like Bacillus anthracis, Francisella tularensis, Yersinia pestis, Ebola virus, MERS, Lassa virus etc. would be very helpful. The best diagnostic strategy would be the metagenomic sequencing directly from the clinical sample. Implementation of majority of currently available WGS platforms inside the BSL-3 or 4 laboratory is impractical because of the size of the equipment and time consuming wet lab part (e.g. library preparation). Nowadays there is a possibility to implement pocket size MinION - real time whole genome sequencer into BSL-3 and 4 laboratory for rapid and precise diagnostic purposes.

Discrimination between regional biotypes of Impatiens glandulifera using a simple MALDI-TOF MS-based method for use with seeds

BACKGROUND

We have recently developed a simple, rapid, and relatively-cheap method for matrix-assisted laser-desorption and ionisation time-of-flight mass spectroscopy (MALDI-TOF MS) sample preparation that is applicable to plant material (in addition to microbial and insect material), and have used this to discriminate between closely-related Impatiens species and between regional biotypes of the invasive weed Impatiens glandulifera (commonly known as Himalayan balsam) using leaf samples. In the current paper, we have developed a complementary MALDI-TOF MS-based method for use with seeds. We have employed a combination of principal-component analysis and blind-tested comparison between reference-sample MALDI-TOF MS spectra and test-sample spectra to discriminate, on the basis of the acid-soluble seed-protein spectra generated by our method, between four regional biotypes of I. glandulifera from within the UK that differ in their susceptibility to the biological control agent Himalayan balsam rust (Puccinia komarovii var. glanduliferae).

RESULTS

Peak-rich and highly-reproducible spectra were obtained and, in blind testing with test seeds collected in 2017 against reference seeds collected in 2017, we observed 100% identification accuracy in 12 blind tests. In blind testing with test seeds collected in 2016 against reference seeds collected in 2017, we observed 92% identification accuracy in 12 blind tests.

CONCLUSIONS

MALDI-TOF MS analysis of seed material is able to discriminate between regional biotypes of I. glandulifera. MALDI-TOF MS therefore has the potential to improve the efficiency and efficacy of weed biological control using co-evolved natural enemies of invasive non-native plant species, through the matching of biological control agents with susceptible regional biotypes.

Genome Sequencing

Strategies for sequencing fungal genomes on next-generation sequencing (NGS) platforms depend on the characteristics of the genome of the targeted species, quantity and quality of the genomic DNA, and cost considerations. Massively parallel sequencing with sequencing by synthesis (SBS) approach by Illumina produces terabases of short read sequences (i.e., ~300 bp) in a time and cost-effective manner, though the read length can limit the assembly particularly in repetitive regions. The single molecule, real-time (SMRT) sequencing approach by Pacific Biosciences (PacBio) produces longer reads (i.e., ~12,500 bp) which can facilitate de novo assembly of genomes that contain long repetitive sequences, though due to the lower-throughput of this platform achieving the coverage needed for assembly is more expensive than by SBS. Additionally, the Illumina SBS platforms can handle low quantity/quality of genomic DNA materials, while the SMRT system requires undamaged long DNA fragments as input to ensure that high-quality data is produced. Both platforms are discussed in this chapter including key decision-making points.

cPAS-based sequencing on the BGISEQ-500 to explore small non-coding RNAs

Background

We present the first sequencing data using the combinatorial probe-anchor synthesis (cPAS)-based BGISEQ-500 sequencer. Applying cPAS, we investigated the repertoire of human small non-coding RNAs and compared it to other techniques.

Results

Starting with repeated measurements of different specimens including solid tissues (brain and heart) and blood, we generated a median of 30.1 million reads per sample. 24.1 million mapped to the human genome and 23.3 million to the miRBase. Among six technical replicates of brain samples, we observed a median correlation of 0.98. Comparing BGISEQ-500 to HiSeq, we calculated a correlation of 0.75. The comparability to microarrays was similar for both BGISEQ-500 and HiSeq with the first one showing a correlation of 0.58 and the latter one correlation of 0.6. As for a potential bias in the detected expression distribution in blood cells, 98.6% of HiSeq reads versus 93.1% of BGISEQ-500 reads match to the 10 miRNAs with highest read count. After using miRDeep2 and employing stringent selection criteria for predicting new miRNAs, we detected 74 high-likely candidates in the cPAS sequencing reads prevalent in solid tissues and 36 candidates prevalent in blood.

Conclusions

While there is apparently no ideal platform for all challenges of miRNome analyses, cPAS shows high technical reproducibility and supplements the hitherto available platforms.

Electronic supplementary material

The online version of this article (doi:10.1186/s13148-016-0287-1) contains supplementary material, which is available to authorized users.

Synthesis of 3'-O-fluorescently mono-modified reversible terminators and their uses in sequencing-by-synthesis

Next-generation sequencing (NGS) technologies recently developed are now used for study of genomes from various organisms. Sequencing-by-synthesis (SBS) is a key strategy in the NGS. The SBS uses nucleotides so-called dual-modified reversible terminators (DRTs) in which bases are labeled with fluorophores and 3'-OH is protected with a reversibly cleavable chemical group, respectively. In this study, we examined the possibility of performing SBS with mono-modified reversible terminators (MRTs), in which the reversible blocking group on the 3'-OH plays a dual role as a fluorescent signal report as well as a chemical protection. We studied cyclic reversible termination by using two MRTs (dA and dT), wherein the modifications were two different fluorophores and cleavable to regenerate a free 3'-OH. We here demonstrated that SBS could be achieved with incorporation of MRTs by a DNA polymerase and correct base-calls based on the two different colors from the fluorophores.

Rapid incorporation kinetics and improved fidelity of a novel class of 3'-OH unblocked reversible terminators

Recent developments of unique nucleotide probes have expanded our understanding of DNA polymerase function, providing many benefits to techniques involving next-generation sequencing (NGS) technologies. The cyclic reversible termination (CRT) method depends on efficient base-selective incorporation of reversible terminators by DNA polymerases. Most terminators are designed with 3′-O-blocking groups but are incorporated with low efficiency and fidelity. We have developed a novel class of 3′-OH unblocked nucleotides, called Lightning Terminators™, which have a terminating 2-nitrobenzyl moiety attached to hydroxymethylated nucleobases. A key structural feature of this photocleavable group displays a ‘molecular tuning’ effect with respect to single-base termination and improved nucleotide fidelity. Using Therminator™ DNA polymerase, we demonstrate that these 3′-OH unblocked terminators exhibit superior enzymatic performance compared to two other reversible terminators, 3′-O-amino-TTP and 3′-O-azidomethyl-TTP. Lightning Terminators™ show maximum incorporation rates (k_pol) that range from 35 to 45 nt/s, comparable to the fastest NGS chemistries, yet with catalytic efficiencies (k_pol/K_D) comparable to natural nucleotides. Pre-steady-state kinetic studies of thymidine analogs revealed that the major determinant for improved nucleotide selectivity is a significant reduction in k_pol by >1000-fold over TTP misincorporation. These studies highlight the importance of structure–function relationships of modified nucleotides in dictating polymerase performance.

Nucleotides part LXXX: Synthesis of 3'-O fluorescence labeled thymidine derivatives and their 5'-O-triphosphates

A new labeling technique attaching a fluorescent pteridine derivative (3, 5) via a linker onto the 3'-OH group of 5'-O-dimethoxytritylthymidine (7) was developed to lead to the conjugates 8 and 11. After detritylation to give 9 and 12, the final conversion into the corresponding 5'-triphosphates (13, 14), which were isolated as sodium salts, was performed by known methods.

Fluoride-cleavable, fluorescently labelled reversible terminators: synthesis and use in primer extension

Fluorescent 2′-deoxynucleotides containing a protecting group at the 3′-O-position are reversible terminators that enable array-based DNA sequencing-by-synthesis (SBS) approaches. Herein, we describe the synthesis and full characterisation of four reversible terminators bearing a 3′-blocking moiety and a linker-dye system that is removable under the same fluoride-based treatment. Each nucleotide analogue has a different fluorophore attached to the base through a fluoride-cleavable linker and a 2-cyanoethyl moiety as the 3′-blocking group, which can be removed by using a fluoride treatment as well. Furthermore, we identified a DNA polymerase, namely, RevertAid M-MuLV reverse transcriptase, which can incorporate the four modified reversible terminators. The synthesised nucleotides and the optimised DNA polymerase were used on CodeLink slides spotted with hairpin oligonucleotides to demonstrate their potential in a cyclic reversible terminating approach.

The challenges of sequencing by synthesis

DNA sequencing-by-synthesis (SBS) technology, using a polymerase or ligase enzyme as its core biochemistry, has already been incorporated in several second-generation DNA sequencing systems with significant performance. Notwithstanding the substantial success of these SBS platforms, challenges continue to limit the ability to reduce the cost of sequencing a human genome to $100,000 or less. Achieving dramatically reduced cost with enhanced throughput and quality will require the seamless integration of scientific and technological effort across disciplines within biochemistry, chemistry, physics and engineering. The challenges include sample preparation, surface chemistry, fluorescent labels, optimizing the enzyme-substrate system, optics, instrumentation, understanding tradeoffs of throughput versus accuracy, and read-length/phasing limitations. By framing these challenges in a manner accessible to a broad community of scientists and engineers, we hope to solicit input from the broader research community on means of accelerating the advancement of genome sequencing technology.

Synthesis of 3′-O-(2-cyanoethyl)-2′-deoxythymidine-5′-phosphate as a model compound for evaluation of cyanoethyl cleavage

An essential and challenging task during the development of our sequencing-by-synthesis (SBS) technique is the evaluation of efficient cyanoethyl (CE) cleavage conditions. For this purpose 3′-O-(2-cyanoethyl)-2′-deoxythymidine-5′-phosphate as a model compound as well as a short DNA oligomer bearing the CE function as terminal group were synthesized and used for various deprotection experiments. As it is already known for 2′-O-CE-protected RNA oligonucleotides, the CE function can be cleaved with tetrabutylammonium fluoride (TBAF) in THF. Indeed, by using 3′-O-(2-cyanoethyl)-2′-deoxythymidine-5′-phosphate as a simple model compound for cleavage tests, we found out that the 3′-O-CE function is quantitatively cleaved with 1 M TBAF in THF. However, the CE group is also cleaved by other small bases like hydroxy groups under alkaline conditions. The CE cleavage with TBAF in THF gives the fastest and quantitative removal of the CE group under mild conditions for our sequencing-by-synthesis (SBS) application. The efficient removal of the 3′-CE group is crucial for the proof-of-principle of our SBS approach using dye-labeled 3′-CE-blocked dNTPs, which is currently under investigation. Herein we describe the application of 3′-O-(2-cyanoethyl)-2′-deoxythymidine-5′-phosphate as model compound for the development of reversible terminators for the SBS technique. Furthermore we suggest that nucleoside phosphates bearing any removable 3′-modification might be suitable model compounds for cleavage studies in a heterogeneous environment comparable to an oligonucleotide/ aprotic solvent system.

Termination of DNA synthesis by N6-alkylated, not 3'-O-alkylated, photocleavable 2'-deoxyadenosine triphosphates

The Human Genome Project has facilitated the sequencing of many species, yet the current Sanger method is too expensive, labor intensive and time consuming to accomplish medical resequencing of human genomes en masse. Of the ‘next-generation’ technologies, cyclic reversible termination (CRT) is a promising method with the goal of producing accurate sequence information at a fraction of the cost and effort. The foundation of this approach is the reversible terminator (RT), its chemical and biological properties of which directly impact the performance of the sequencing technology. Here, we have discovered a novel paradigm in RT chemistry, the attachment of a photocleavable, 2-nitrobenzyl group to the N⁶-position of 2′-deoxyadenosine triphosphate (dATP), which, upon incorporation, terminates DNA synthesis. The 3′-OH group of the N⁶-(2-nitrobenzyl)-dATP remains unblocked, providing favorable incorporation and termination properties for several commercially available DNA polymerases while maintaining good discrimination against mismatch incorporations. Upon removal of the 2-nitrobenzyl group with UV light, the natural nucleotide is restored without molecular scarring. A five-base experiment, illustrating the exquisite, stepwise addition through a homopolymer repeat, demonstrates the applicability of the N⁶-(2-nitrobenzyl)-dATP as an ideal RT for CRT sequencing.

A diversity oriented synthesis of 3'-O-modified nucleoside triphosphates for DNA 'sequencing by synthesis'

The nucleoside triphosphates 1, containing a photochemically cleavable group, and 2, having one that may be cleaved via palladium catalysis, were prepared as a prelude to investigating sequencing of DNA via sequencing by synthesis.

Emerging technologies in DNA sequencing

Demand for DNA sequence information has never been greater, yet current Sanger technology is too costly, time consuming, and labor intensive to meet this ongoing demand. Applications span numerous research interests, including sequence variation studies, comparative genomics and evolution, forensics, and diagnostic and applied therapeutics. Several emerging technologies show promise of delivering next-generation solutions for fast and affordable genome sequencing. In this review article, the DNA polymerase-dependent strategies of Sanger sequencing, single nucleotide addition, and cyclic reversible termination are discussed to highlight recent advances and potential challenges these technologies face in their development for ultrafast DNA sequencing.

Multiplexed DNA sequencing-by-synthesis

We report a new DNA sequencing-by-synthesis method in which the sequences of DNA templates, hybridized to a surface-immobilized array of DNA primers, are determined by sensing the number of nucleotides by which the primers in each array spot are extended in sequential DNA polymerase-catalyzed nucleotide incorporation reactions, each with a single fluorescein-labeled deoxyribonucleoside triphosphate (dNTP) species. The fluorescein label is destroyed after each readout by a photostimulated reaction with diphenyliodonium chloride. A DNA polymerase with enhanced ability to incorporate, and to extend beyond, modified nucleotides is used. Self-quenching of adjacent fluorescein labels, which impedes readout of homopolymeric runs, is avoided by diluting the labeled dNTP with unlabeled reagent. Misincorporation effects have been quantified and are small; however, low-level contamination of dNTPs with other nucleotides mimics misincorporation and can produce significant false-positive signals. These impurities are removed by polymerase-catalyzed incorporation into complementary "cleaning duplexes." Here, we demonstrate the accurate sequence readout for a small array of known DNA templates, the ability to quantify homopolymeric runs, and a short sequencing example of sections of the wild-type and mutant BRCA1 gene. For a 20,000-spot array, readout rates in excess of 6000 bases per minute are projected.

Advances in sequencing technology

Faster sequencing methods will undoubtedly lead to faster single nucleotide polymorphism (SNP) discovery. The Sanger method has served as the cornerstone for genome sequence production since 1977, close to almost 30 years of tremendous utility [Sanger, F., Nicklen, S., Coulson, A.R, DNA sequencing with chain-terminating inhibitors, Proc. Natl. Acad. Sci. U.S.A. 74 (1977) 5463-5467]. With the completion of the human genome sequence [Venter, J.C. et al., The sequence of the human genome, Science 291 (2001) 1304-1351; Lander, E.S. et al., Initial sequencing and analysis of the human genome, Nature 409 (2001) 860-921], there is now a focus on developing new sequencing methodologies that will enable "personal genomics", or the routine study of our individual genomes. Technologies that will lead us to this lofty goal are those that can provide improvements in three areas: read length, throughput, and cost. As progress is made in this field, large sections of genomes and then whole genomes of individuals will become increasingly more facile to sequence. SNP discovery efforts will be enhanced lock-step with these improvements. Here, the breadth of new sequencing approaches will be summarized including their status and prospects for enabling personal genomics.

Sequencing by hybridization (SBH): advantages, achievements, and opportunities

Efficient DNA sequencing of the genomes of individual species and organisms is a critical task for the advancement of biological sciences, medicine and agriculture. Advances in modern sequencing methods are needed to meet the challenge of sequencing such megabase to gigabase quantities of DNA. Two possible strategies for DNA sequencing exist: direct methods, in which each base position in the DNA chain is determined individually (e.g., gel sequencing or pyrosequencing), and indirect methods, in which the DNA sequence is assembled based on experimental determination of oligonucleotide content of the DNA chain. One promising indirect method is sequencing by hybridization (SBH), in which sets of oligonucleotides are hybridized under conditions that allow detection of complementary sequences in the target nucleic acid. The unprecedented sequence search parallelism of the SBH method has allowed development of high-throughput, low-cost, miniaturized sequencing processes on arrays of DNA samples or probes. Newly developed SBH methods use DNA ligation to combine relatively small sets of short probes to score potentially tens of millions of longer oligonucleotide sequences in a target DNA. Such combinatorial approaches allow analysis of DNA samples of up to several kilobases (several times longer than allowed by current direct methods) for a variety of DNA sequence analysis applications, including de novo sequencing, resequencing, mutation/SNP discovery and genotyping, and expression monitoring. Future advances in biochemistry and implementation of detection methods that allow single-molecule sensitivity may provide the necessary miniaturization, specificity, and multiplexing efficiency to allow routine whole genome analysis in a single solution-based hybridization experiment.

Method enabling fast partial sequencing of cDNA clones

Pyrosequencing is a nonelectrophoretic single-tube DNA sequencing method that takes advantage of cooperativity between four enzymes to monitor DNA synthesis. To investigate the feasibility of the recently developed technique for tag sequencing, 64 colonies of a selected cDNA library from human were sequenced by both pyrosequencing and Sanger DNA sequencing. To determine the needed length for finding a unique DNA sequence, 100 sequence tags from human were retrieved from the database and different lengths from each sequence were randomly analyzed. An homology search based on 20 and 30 nucleotides produced 97 and 98% unique hits, respectively. An homology search based on 100 nucleotides could identify all searched genes. Pyrosequencing was employed to produce sequence data for 30 nucleotides. A similar search using BLAST revealed 16 different genes. Forty-six percent of the sequences shared homology with one gene at different positions. Two of the 64 clones had unique sequences. The search results from pyrosequencing were in 100% agreement with conventional DNA sequencing methods. The possibility of using a fully automated pyrosequencer machine for future high-throughput tag sequencing is discussed.

Pyrosequencing Sheds Light on DNA Sequencing

DNA sequencing is one of the most important platforms for the study of biological systems today. Sequence determination is most commonly performed using dideoxy chain termination technology. Recently, pyrosequencing has emerged as a new sequencing methodology. This technique is a widely applicable, alternative technology for the detailed characterization of nucleic acids. Pyrosequencing has the potential advantages of accuracy, flexibility, parallel processing, and can be easily automated. Furthermore, the technique dispenses with the need for labeled primers, labeled nucleotides, and gel-electrophoresis. This article considers key features regarding different aspects of pyrosequencing technology, including the general principles, enzyme properties, sequencing modes, instrumentation, and potential applications.

Development of a new DNA sequencing method: 3'-ester cleavage catalyzed by Taq DNA polymerase

A new 3'-esterified dTTP is incorporated into DNA by Taq DNA polymerase but does not act as a chain terminator. The esterase activity of the polymerase seems to be template dependent and occurs only if the next correct nucleotide is present.

Synthesis of fluorescent, photolabile 3'-O-protected nucleoside triphosphates for the base addition sequencing scheme

The dansylated nucleoside triphosphates 1a and 1b were prepared as a prelude to investigating sequencing of DNA via a scheme that does not involve electrophoresis.

Catalytic editing properties of DNA polymerases

Enzymatic incorporation of 2',3'-dideoxynucleotides into DNA results in chain termination. We report that 3'-esterified 2'-deoxynucleoside 5'-triphosphates (dNTPs) are false chain-terminator substrates since DNA polymerases, including human immunodeficiency virus reverse transcriptase, can incorporate them into DNA and, subsequently, use this new 3' end to insert the next correctly paired dNTP. Likewise, a DNA substrate with a primer chemically esterified at the 3' position can be extended efficiently upon incubation with dNTPs and T7 DNA polymerase lacking 3'-to-5' exonuclease activity. This enzyme is also able to use dTTP-bearing reporter groups in the 3' position conjugated through amide or thiourea bonds and cleave them to restore a DNA chain terminated by an amino group at the 3' end. Hence, a number of DNA polymerases exhibit wide catalytic versatility at the 3' end of the nascent DNA strand. As part of the polymerization mechanism, these capabilities extend the number of enzymatic activities associated with these enzymes and also the study of interactions between DNA polymerases and nucleotide analogues.