Particle size reduction for improvement of oral bioavailability of hydrophobic drugs: I. Absolute oral bioavailability of nanocrystalline danazol in beagle dogs

Enhancing the Bioavailability of the Ellagitannin, Geraniin: Formulation, Characterization, and in vivo Evaluation

Geraniin (GE), an ellagitannin (ET) renowned for its promising health advantages, faces challenges in its practical applications due to its limited bioavailability. This innovative and novel formulation of GE and soy-phosphatidylcholine (GE-PL) complex has the potential to increase oral bioavailability, exhibiting high entrapment efficiency of 100.2 ± 0.8 %, and complexation efficiency of 94.6 ± 1.1 %. The small particle size (1.04 ± 0.11 μm), low polydispersity index (0.26 ± 0.02), and adequate zeta potential (-26.1 ± 0.12 mV), indicate its uniformity and stability. Moreover, the formulation also demonstrates improved lipophilicity, reduced aqueous and buffer solubilities, and better partition coefficient. It has been validated by various analytical techniques, including Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) studies. Oral bioavailability and pharmacokinetics of free GE and GE-PL complex investigated in rabbits demonstrated enhanced plasma concentration of ellagic acid (EA) compared to free GE. Significantly, GE, whether in its free form or as part of the GE-PL complex, was not found in the circulatory system. However, EA levels were observed at 0.5 h after administration, displaying two distinct peaks at 2 ± 0.03 h (T1max) and 24 ± 0.06 h (T2max). These peaks corresponded to peak plasma concentrations (C1max and C2max) of 588.82 ng/mL and 711.13 ng/mL respectively, signifying substantial 11-fold and 5-fold enhancements when compared to free GE. Additionally, it showed an increased area under the curve (AUC), the elimination half-life (t1/2, el) and the elimination rate constant (Kel). The formulation of the GE-PL complex prolonged the presence of EA in the bloodstream and improved its absorption, ultimately leading to a higher oral bioavailability. In summary, the study highlights the significance of the GE-PL complex in overcoming the bioavailability limitations of GE, paving the way for enhanced therapeutic outcomes and potential applications in drug delivery and healthcare.

Surfactant-Polymer Complexation and Competition on Drug Nanocrystal Surfaces Control Crystallinity

Nanosizing drug crystals has emerged as a successful approach to enabling oral bioavailability, as increasing drug crystal surface area improves dissolution kinetics and effective solubility. Recently, bottom-up methods have been developed to directly assemble nanosized crystals by leveraging polymer and surfactant excipients during crystallization to control crystal size, morphology, and structure. However, while significant research has investigated how polymers and other single additives inhibit or promote crystallization in pharmaceutical systems, there is little work studying the mechanistic interactions of multiple excipients on drug crystal structure and the extent of crystallinity, which can influence formulation performance. This study explores how the structure and crystallinity of a model hydrophobic drug crystal, fenofibrate, change as a result of competitive interfacial chemisorption between common nonionic surfactants (polysorbate 80 and sorbitan monooleate) and a surface-active polymer excipient (methylcellulose). Classical molecular dynamics simulations highlight how key intermolecular interactions, including surfactant-polymer complexation and surfactant screening of the crystal surface, modify the resulting crystal structure. In parallel, experiments generating drug nanocrystals in hydrogel thin films validate that drug crystallinity increases with an increasing weight fraction of surfactant. Simulation results reveal a connection between accelerated dynamics in the bulk crystal and the experimentally measured extent of crystallinity. To our knowledge, these are the first simulations that directly characterize structural changes in a drug crystal as a result of excipient surface composition and relate the experimental extent of crystallinity to structural changes in the molecular crystal. Our approach provides a mechanistic understanding of crystallinity in nanocrystallization, which can expand the range of orally deliverable small molecule therapies.

Eudragit L100-coated nintedanib nanocrystals improve oral bioavailability by reducing drug particle size and maintaining drug supersaturation

The aim of this study was to prepare nintedanib nanocrystals (BIBF-NCs) to lower the solubility of the drug in the stomach, maintain the supersaturation of the drug in the intestine, and improve the oral absorption of nintedanib (BIBF). In this study, BIBF-NCs were prepared by acid solubilization and alkaline precipitation following nano granding method, with a particle size of 290.80 nm and a zeta potential of -49.13 mV. Subsequently, Nintedanib enteric-coated nanocrystals (BIBF-NCs@L100) were obtained by coating with Eudragit L100. The microscopic morphology, crystalline characteristics, stability, and in vitro dissolution of BIBF-NCs and BIBF-NCs@L100 were also studied. In addition, the in vivo pharmacokinetic behaviors of Samples prepared according to the prescription process of commercially available soft capsules (soft capsules), BIBF-NCs, and BIBF-NCs@L100 were further investigated. The results showed that the oral bioavailability of BIBF-NCs and BIBF-NCs@L100 were increased by 1.43 and 2.58 times, compared with that of the soft capsules. BIBF-NCs@L100 effectively reduced the release of BIBF in the formulation in the stomach, allowing more drug to reach the intestine in the form of nanocrystals, maintaining the supersaturation in the intestine, thereby improving the oral bioavailability of the drug.

Lipid-Based Nanoparticles as Oral Drug Delivery Systems: Overcoming Poor Gastrointestinal Absorption and Enhancing Bioavailability of Peptide and Protein Therapeutics

Delivery and formulation of oral peptide and protein therapeutics have always been a challenge for the pharmaceutical industry. The oral bioavailability of peptide and protein therapeutics mainly relies on their gastrointestinal solubility and permeability which are affected by their poor membrane penetration, high molecular weight and proteolytic (chemical and enzymatic) degradation resulting in limited delivery and therapeutic efficacy. The present review article highlights the challenges and limitations of oral delivery of peptide and protein therapeutics focusing on the application, potential and importance of solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) as lipid-based drug delivery systems (LBDDSs) and their advantages and drawbacks. LBDDSs, due to their lipid-based matrix can encapsulate both lipophilic and hydrophilic drugs, and by reducing the first-pass effect and avoiding proteolytic degradation offer improved drug stability, dissolution rate, absorption, bioavailability and controlled drug release. Furthermore, their small size, high surface area and surface modification increase their mucosal adhesion, tissue-targeted distribution, physiological function and half-life. Properties such as simple preparation, high-scale manufacturing, biodegradability, biocompatibility, prolonged half-life, lower toxicity, lower adverse effects, lipid-based structure, higher drug encapsulation rate and various drug release profile compared to other similar carrier systems makes LBDDSs a promising drug delivery system (DDS). Nevertheless, undesired physicochemical features of peptide and protein drug development and discovery such as plasma stability, membrane permeability and circulation half-life remain a serious challenge which should be addressed in future.

Formulation Strategies of Nanosuspensions for Various Administration Routes

Nanosuspensions (NSs), which are nanosized colloidal particle systems, have recently become one of the most interesting substances in nanopharmaceuticals. NSs have high commercial potential because they provide the enhanced solubility and dissolution of low-water-soluble drugs by means of their small particle sizes and large surface areas. In addition, they can alter the pharmacokinetics of the drug and, thus, improve its efficacy and safety. These advantages can be used to enhance the bioavailability of poorly soluble drugs in oral, dermal, parenteral, pulmonary, ocular, or nasal routes for systemic or local effects. Although NSs often consist mainly of pure drugs in aqueous media, they can also contain stabilizers, organic solvents, surfactants, co-surfactants, cryoprotectants, osmogents, and other components. The selection of stabilizer types, such as surfactants or/and polymers, and their ratio are the most critical factors in NS formulations. NSs can be prepared both with top-down methods (wet milling, dry milling, high-pressure homogenization, and co-grinding) and with bottom-up methods (anti-solvent precipitation, liquid emulsion, and sono-precipitation) by research laboratories and pharmaceutical professionals. Nowadays, techniques combining these two technologies are also frequently encountered. NSs can be presented to patients in liquid dosage forms, or post-production processes (freeze drying, spray drying, or spray freezing) can also be applied to transform the liquid state into the solid state for the preparation of different dosage forms such as powders, pellets, tablets, capsules, films, or gels. Thus, in the development of NS formulations, the components/amounts, preparation methods, process parameters/levels, administration routes, and dosage forms must be defined. Moreover, those factors that are the most effective for the intended use should be determined and optimized. This review discusses the effect of the formulation and process parameters on the properties of NSs and highlights the recent advances, novel strategies, and practical considerations relevant to the application of NSs to various administration routes.

Pharmacokinetic evaluation of poorly soluble compounds formulated as nano- or microcrystals after intraperitoneal injection to mice

Intraperitonial (i.p.) delivery during initial stages of drug discovery can allow efficacy readouts for compounds which have suboptimal pharmacokinetics (PK) due to poor physiochemical properties and/or oral bioavailability. A major limitation for widespread use of i.p. administration is the paucity of published data and unclear mechanisms of absorption, particularly when using complex formulations. The aim of the present study was to investigate the PK of poorly soluble compounds with low oral bioavailability when administered i.p. as crystalline nano- and microsuspensions. Three compounds, with varying aqueous solubility (2, 7, and 38 µM, at 37 °C), were dosed to mice at 10 and 50 mg/kg. In vitro dissolution confirmed that nanocrystals dissolved faster than microcrystals and hence were expected to result in higher exposure after i.p. dosing. Surprisingly, the increase in dissolution rate with decrease in particle size did not result in higher in vivo exposure. In contrast, the microcrystals showed higher exposure. The potential of smaller particles to promote access to the lymphatic system is hypothesized and discussed as one plausible explanation. The present work demonstrates the importance of understanding physicochemical properties of drug formulations in the context of the microphysiology at the delivery site and how that knowledge can be leveraged to alter systemic PK.

Rutin Nanocrystals with Enhanced Anti-Inflammatory Activity: Preparation and Ex Vivo/In Vivo Evaluation in an Inflammatory Rat Model

Rutin is a polyphenolic flavonoid with an interestingly wide therapeutic spectrum. However, its clinical benefits are limited by its poor aqueous solubility and low bioavailability. In an attempt to overcome these limitations, rutin nanocrystals were prepared using various stabilizers including nonionic surfactants and nonionic polymers. The nanocrystals were evaluated for particle size, zeta potential, drug entrapment efficiency, morphology, colloidal stability, rutin photostability, dissolution rate, and saturation solubility. The selected nanocrystal formulation was dispersed in a hydrogel base and the drug release kinetics and permeability through mouse skin were characterized. Rutin's anti-inflammatory efficacy was studied in a carrageenan-induced rat paw edema model. The nanocrystals had a size in the range of around 270-500 nm and a polydispersity index of around 0.3-0.5. Nanocrystals stabilized by hydroxypropyl beta-cyclodextrin (HP-β-CD) had the smallest particle size, highest drug entrapment efficiency, best colloidal stability, and highest drug photostability. Nanocrystals had around a 102- to 202-fold and 2.3- to 6.7-fold increase in the drug aqueous solubility and dissolution rate, respectively, depending on the type of stabilizer. HP-β-CD nanocrystals hydrogel had a significantly higher percent of drug released and permeated through the mouse skin compared with the free drug hydrogel. The cumulative drug amount permeated through the skin was 2.5-fold higher than that of the free drug hydrogel. In vivo studies showed that HP-β-CD-stabilized rutin nanocrystals hydrogel had significantly higher edema inhibition compared with the free drug hydrogel and commercial diclofenac sodium gel. These results highlight the potential of HP-β-CD-stabilized nanocrystals as a promising approach to enhance drug solubility, dissolution rate, and anti-inflammatory properties.

Intensification of resveratrol cytotoxicity, pro-apoptosis, oxidant potentials in human colorectal carcinoma HCT-116 cells using zein nanoparticles

Resveratrol (RSV), a non-flavonoid stilbene polyphenol, possesses anti-carcinogenic activities against all the major stages of cancer. Zein nanoparticles (ZN NPs) have been utilized successfully in delivery of variant therapeuticals by virtue of their histocompatible nature. The goal of this work was to comparatively explore the antiproliferative, pro-apoptotic and oxidative stress potentials of RSV-ZN NPs versus RSV against human colorectal carcinoma HCT-116 cells. ZN-RSV NPs were developed and assayed for particle size analysis and RSV diffusion. The selected formula obtained 137.6 ± 8.3 nm as mean particle size, 29.4 ± 1.8 mV zeta potential, 92.3 ± 3.6% encapsulation efficiency. IC₅₀ of the selected formula was significantly lower against HCT-116 cells versus Caco-2 cells. Also, significantly enhanced cellular uptake was generated from RSV-ZN NPs versus free RSV. Enhanced apoptosis was concluded due to increased percentage cells in G2-M and pre-G1 phases. The pro-apoptotic potential was explained by caspase-3 and cleaved caspase-3 increased mRNA expression in addition to NF-κB and miRNA125b decreased expression. Biochemically, ZN-RSV NPs induced oxidative stress as demonstrated by enhanced reactive oxygen species (ROS) generation and endothelial nitric oxide synthase (eNOS) isoenzyme increased levels. Conclusively, ZN-RSV NPs obtained cell cycle inhibition supported with augmented cytotoxicity, uptake and oxidative stress markers levels in HCT-116 tumor cells in comparison with free RSV. These results indicated intensified chemopreventive profile of RSV due to effective delivery utilizing ZN nano-dispersion against colorectal carcinoma HCT-116 cells.

Bioavailability Enhancement Techniques for Poorly Aqueous Soluble Drugs and Therapeutics

The low water solubility of pharmacoactive molecules limits their pharmacological potential, but the solubility parameter cannot compromise, and so different approaches are employed to enhance their bioavailability. Pharmaceutically active molecules with low solubility convey a higher risk of failure for drug innovation and development. Pharmacokinetics, pharmacodynamics, and several other parameters, such as drug distribution, protein binding and absorption, are majorly affected by their solubility. Among all pharmaceutical dosage forms, oral dosage forms cover more than 50%, and the drug molecule should be water-soluble. For good therapeutic activity by the drug molecule on the target site, solubility and bioavailability are crucial factors. The pharmaceutical industry’s screening programs identified that around 40% of new chemical entities (NCEs) face various difficulties at the formulation and development stages. These pharmaceuticals demonstrate less solubility and bioavailability. Enhancement of the bioavailability and solubility of drugs is a significant challenge in the area of pharmaceutical formulations. According to the Classification of Biopharmaceutics, Class II and IV drugs (APIs) exhibit poor solubility, lower bioavailability, and less dissolution. Various technologies are discussed in this article to improve the solubility of poorly water-soluble drugs, for example, the complexation of active molecules, the utilization of emulsion formation, micelles, microemulsions, cosolvents, polymeric micelle preparation, particle size reduction technologies, pharmaceutical salts, prodrugs, the solid-state alternation technique, soft gel technology, drug nanocrystals, solid dispersion methods, crystal engineering techniques and nanomorph technology. This review mainly describes several other advanced methodologies for solubility and bioavailability enhancement, such as crystal engineering, micronization, solid dispersions, nano sizing, the use of cyclodextrins, solid lipid nanoparticles, colloidal drug delivery systems and drug conjugates, referring to a number of appropriate research reports.

Biological and Intracellular Fates of Drug Nanocrystals through Different Delivery Routes: Recent Development Enabled by Bioimaging and PK Modeling

Nanocrystals have contributed to exciting improvements in the delivery of poorly water-soluble drugs. The biological and intracellular fates of nanocrystals are currently under debate. Due to the remarkable commercial success in enhancing oral bioavailability, nanocrystals have originally been regarded as a simple formulation approach to enhance dissolution. However, the latest findings from novel bioimaging tools lead to an expanded view. Intact nanocrystals may offer long-term durability in the body and offer drug delivery capabilities like those of other nano-carriers. This review renews the understanding of the biological fates of nanocrystals administered via oral, intravenous, and parenteral (e.g., dermal, ocular, and pulmonary) routes. The intracellular pathways and dissolution kinetics of nanocrystals are explored. Additionally, the future trends for in vitro and in vivo quantification of nanocrystals, as well as factors impacting the biological and intracellular fates of nanocrystals are discussed. In conclusion, nanocrystals present a promising and underexplored therapeutic opportunity with immense potential.

A recent solidification approach for nanosuspension: formulation, optimisation and evaluation of canagliflozin immediate release pellets

Abstract.

Evidence of transient amorphization during the polymorphic transformation of sorbitol induced by milling

In this paper, we show that the polymorphic transformation γ → α of sorbitol upon milling involves a transient amorphization of the material. This could be done by comilling sorbitol with a high Tg amorphous material (Hydrochlorothiazide, Tg = 115 °C) to stabilize any transient amorphous fractions of sorbitol through the formation of a molecular alloy. The results indicate that for large sorbitol concentration (50%), the comilling leads to a heterogeneous mixture made of sorbitol crystallites in the form α embedded into an amorphous molecular alloy sorbitol / HCT. Interestingly, the kinetic investigation of this transformation reveals that these two components are not produced simultaneously. On the contrary, they are produced one after the other, during two distinct consecutive stages. The first stage concerns the formation of the amorphous alloy while the second one concerns the polymorphic transformation γ → α of the fraction of crystalline sorbitol not involved in the alloy. These results clearly indicate that the polymorphic transformation of sorbitol upon milling results from the recrystallization of a transient amorphous state generated by the mechanical shocks. The investigations were mainly performed by calorimetry and powder X-ray diffraction.

Danazol

A comprehensive profile of danazol describing the nomenclatures, formulae, elemental composition, appearance, uses and applications is presented. The profile contains the method which was utilized for the preparation of the drug substance and its respective scheme is outlined. The physical characteristics of the drug including the solubility, X-ray powder diffraction pattern, differential scanning calorimetry, thermal behavior and spectroscopic studies are described. The methods which were used for the analysis of the drug substance in bulk drug and/or in pharmaceutical formulations including the compendial, spectrophotometric, electrochemical and the chromatographic methods are reported. The stability, toxicity, pharmacokinetics, bioavailability, drug evaluation and monitoring, comparisons, pharmacology, in addition to several compiled reviews on the drug substance which were involved. Finally, two hundred and seventy-nine references are listed at the end of this profile.

Oral Formulation Based on Irbesartan Nanocrystals Improve Drug Solubility, Absorbability, and Efficacy

We previously reported that the bioavailability (BA) of irbesartan (IRB), a BSC class II drug, was improved by preparing nanocrystalline suspensions. However, nanocrystalline suspensions have chemical and physical instabilities and must be converted into tablets through drying approaches in order to overcome such instabilities. In this study, we attempted to design a molded tablet based on nanocrystalline IRB suspensions (IRB-NP tablet) and investigated the effects of this IRB-NP tablet on blood pressure (BP) in a stroke-prone spontaneously hypertensive (SHR-SP) rat. The IRB-NP tablet (with a hardness of 42.6 N) was developed by combining various additives (methylcellulose, 2-hydroxypropyl-β-cyclodextrin HPβCD, D-mannitol, polyvinylpyrrolidone, and gum arabic) followed by bead-milling and freeze-drying treatments. The mean particle size in the redispersions of the IRB-NP tablet was approximately 118 nm. The solubility and intestinal absorption of IRB in the IRB-NP tablet were significantly enhanced in comparison with the microcrystalline IRB tablet (IRB-MP tablet), and both solubility and clathrin-dependent endocytosis helped improve the low BA of the IRB. In addition, the BP-reducing effect of the IRB-NP tablet was significantly higher than that of the IRB-MP tablet. These results provide useful information for the preservation of nanocrystalline suspensions of BCS class II drugs, such as IRB.

High-Payload Nanosuspension of Centella asiatica Extract for Improved Skin Delivery with No Irritation

Background

The titrated extract of Centella asiatica (CA) has received much attention as a cosmeceutical ingredient owing to its anti-wrinkle effect. However, due to the low solubility and high molecular weight of pharmacologically active constituents, including asiatic acid (AA), madecassic acid (MA), and asiaticoside (AS), it is challenging to fabricate high-payload topical preparations of CA with satisfactory skin absorption profiles.

Purpose

This study aimed to design a high-payload topical preparation of CA using nanocrystallization technique and to evaluate its skin absorption profile and local tolerability.

Methods

High-payload nanocrystal suspensions (NSs) were prepared using lab-scale bead-milling technology, by adjusting the type and amount of suspending agent, CA content, type of vehicle, and milling speed. CA-loaded NSs were characterized in terms of morphology, particle size, crystallinity, and in vitro dissolution pattern. Skin absorption of CA nanocrystals was evaluated using a vertical Franz diffusion cell mounted with porcine skin. In vivo skin irritation following topical application of high-payload NS was assessed in normal rats.

Results

The optimized NS system, composed of 10% (w/v) CA, 0.5% polyvinylpyrrolidone (PVP) K30 as steric stabilizer, and 89.5% of distilled water, was characterized as follows: spherical or elliptical in shape, 200 nm in size, with low crystallinity. The in vitro dissolution of AA or MA from NSs was markedly faster compared to raw material, under sink condition. Penetration of AA, MA, and AS in the porcine skin was markedly elevated using the high-payload NS formula, providing 5-, 4-, and 4.5-fold higher accumulation in skin layer, compared to that of the marketed cream formula (CA 1%, Madeca cream). Moreover, topical application of high-payload NS was tolerable, showing neither erythema nor oedema in normal rats.

Conclusion

The novel NS system is expected to be a virtuous approach for offering a better skin absorption of CA, without using an excess quantity of solubilizers.

Development of Fully Redispersible Dried Nanocrystals by Using Sucrose Laurate as Stabilizer for Increasing Surface Area and Dissolution Rate of Poorly Water-Soluble Drugs

There is much interest in converting poorly water-soluble drugs into nanocrystals as they provide extremely high surface area that increases dissolution rate and oral bioavailability. However, nanocrystals are prepared as aqueous suspensions, and once the suspensions are dried for development of solid dosage forms, the nanocrystals agglomerate as large particles to reduce the excess surface energy. For successful development of drug products, it is essential that any agglomeration is reversible, and the dried nanocrystals regain original particle sizes after redispersion in aqueous media. We have established that sucrose laurate serves as a superb stabilizer to ensure complete redispersion of dried nanocrystals in aqueous media with mild agitation. Nanocrystals (150-300 nm) of three neutral drugs (fenofibrate, danazol and probucol) were produced with sucrose laurate by media milling, and suspensions were dried by tray drying under vacuum, spray drying, and lyophilization. Dried solids and their tablets redispersed into original particle sizes spontaneously. Preliminary studies showed that sucrose laurate can also redisperse acidic and basic drugs, indicating its versatile application. Fatty acid ester of another disaccharide, lactose laurate, also performed like sucrose laurate. Thus, we have developed a method of retaining high dissolution rate and, by implication, high bioavailability of nanocrystals from solid formulations.

Nanocrystalline Suspensions of Irbesartan Enhance Oral Bioavailability by Improving Drug Solubility and Leading Endocytosis Uptake into the Intestine

We attempted to design irbesartan nanocrystalline (IRB-NC) suspensions by the bead mill method, and we evaluated the bioavailability (BA) in the oral administration of the nanocrystalline drug. The mean particle size of the IRB-NC suspensions was approximately 140 nm, and the crystalline structure of irbesartan in these suspensions was different using the bead mill method. The aggregation and degradation of irbesartan were not observed for one month, and the solubility increased. Moreover, the inclusion complex formation of IRB-NC suspensions with 2-hydroxypropyl-β-cyclodextrin was higher than that in traditional IRB powder (IRB-P). In addition, the intestinal absorption of IRB-NC suspensions was higher than that of IRB-P suspensions, and the reducing effect on blood pressure in spontaneously hypertensive SHR-SP rats orally administered IRB-NC suspensions was significantly higher than in those administered IRB-P suspensions. On the other hand, the intestinal penetration of IRB-NC suspensions was attenuated by the inhibitors of clathrin-dependent endocytosis (CME). In conclusion, we improved the low oral BA of irbesartan by preparing IRB-NC suspensions and showed that both the solubility and CME are related to the enhanced intestinal absorption of IRB-NC suspensions, resulting in an increase in their antihypertensive effect. These findings provide significant information for the development of oral nanomedicines.

Curcumin nanoparticles supported gelatin-collagen scaffold: Preparation, characterization, and in vitro study

•

Curcumin nanoparticules Biofilms (CNs-BF) was successfully prepared from gelatin, collagen and Curcumin nanoparticules (CNs).

•

CNs-BF had necessary mechanical strength and biocompatibility of biofilm production.

•

Promising material for tissue regeneration application.

•

An alternative method for biofilm production.

It is possible to reveal the potential of water-insoluble drugs by increasing their solubility in water with some nanotechnology techniques. Nanosuspension technology can solve this problem by increasing the water solubility and as well as bioavailability of these drugs. The present work is pointed at the evaluation of nanosuspension of curcumin, a poorly water-soluble drug. The Curcumin nanoparticules (CNs) were prepared with ultrasonnication method using dichloromethane as solvent and water as antisolvent and characterized via spectroscopic methods (UV–vis and FT-IR) and Scanning Electron Microscopy (SEM). Curcumin nanoparticules Biofilms (CNs-BF) supported gelatin-collagen scaffold were prepared. Curcumin nanoparticles were obtained by nanosuspension technique. And then, to overcome the limited effects of curcumin such as solubility and bioavailability, nanoparticle films were prepared by incorporating it into the structure of biocompatible collagen-gelatin scaffolds. Curcumin is limited by some factors that limit its clinical applicability, such as low oral bioavailability, poor water solubility and rapid degradation. However, they can be applied clinically when they are included in the structure of biocompatible gelatin-collagen scaffolds.

Overcoming the Low Oral Bioavailability of Deuterated Pyrazoloquinolinone Ligand DK-I-60-3 by Nanonization: A Knowledge-Based Approach

Poor water solubility of new chemical entities is considered as one of the main obstacles in drug development, as it usually leads to low bioavailability after administration. To overcome these problems, the selection of the appropriate formulation technology needs to be based on the physicochemical properties of the drug and introduced in the early stages of drug research. One example of the new potential drug substance with poor solubility is DK-I-60-3, deuterated pyrazoloquinolinone, designed for the treatment of various neuropsychiatric disorders. In this research, based on preformulation studies, nanocrystal technology was chosen to improve the oral bioavailability of DK-I-60-3. Nanocrystal dispersions stabilized by sodium lauryl sulfate and polyvinylpyrrolidone were prepared by modified wet media milling technique, with the selection of appropriate process and formulation parameters. The nanoparticles characterization included particle size and zeta potential measurements, differential scanning calorimetry, X-ray powder diffraction, dissolution and solubility study, and in vivo pharmacokinetic experiments. Developed formulations had small uniform particle sizes and were stable for three months. Nanonization caused decreased crystallite size and induced crystal defects formation, as well as a DK-I-60-3 solubility increase. Furthermore, after oral administration of the developed formulations in rats, two to three-fold bioavailability enhancement was observed in plasma and investigated organs, including the brain.

Cryochemical Production of Drug Nanoforms: Particle Size and Crystal Phase Control of the Antibacterial Medication 2,3-Quinoxalinedimethanol-1,4-dioxide (Dioxidine)

Increasing the effectiveness of known, well-tested drugs is a promising low-cost alternative to the search for new drug molecular forms. Powerful approaches to solve this problem are (a) an active drug particle size reduction down to the nanoscale and (b) thermodynamically metastable but kinetically stable crystal modifications of drug acquisition. The combined cryochemical method has been used for size and structural modifications of the antibacterial drug 2,3-quinoxalinedimethanol-1,4-dioxide (dioxidine). The main stage of the proposed technique includes the formation of a molecular vapor of the drug substance, combined with a carrier gas (CO₂) flow, followed by a fast condensation of the drug substance and CO₂ molecules on a cooled-by-liquid nitrogen surface of preparative cryostate. It was established that the molecular chemical structure of the drug substance remained unchanged during cryochemical modification; however, it led to a significant decrease of the drug particles’ size down to nanosizes and changes in the crystal structures of the solid drug nanoforms obtained. Varying carrier gas (CO₂) flow led to changes in their solid phase composition. A higher dissolution rate and changes in antibacterial activity were demonstrated for cryomodified dioxidine samples in comparison to the properties of the initial pharmacopeia dioxidine.

Endophytic Nanotechnology: An Approach to Study Scope and Potential Applications

Nanotechnology has become a very advanced and popular form of technology with huge potentials. Nanotechnology has been very well explored in the fields of electronics, automobiles, construction, medicine, and cosmetics, but the exploration of nanotecnology's use in agriculture is still limited. Due to climate change, each year around 40% of crops face abiotic and biotic stress; with the global demand for food increasing, nanotechnology is seen as the best method to mitigate challenges in disease management in crops by reducing the use of chemical inputs such as herbicides, pesticides, and fungicides. The use of these toxic chemicals is potentially harmful to humans and the environment. Therefore, using NPs as fungicides/ bactericides or as nanofertilizers, due to their small size and high surface area with high reactivity, reduces the problems in plant disease management. There are several methods that have been used to synthesize NPs, such as physical and chemical methods. Specially, we need ecofriendly and nontoxic methods for the synthesis of NPs. Some biological organisms like plants, algae, yeast, bacteria, actinomycetes, and fungi have emerged as superlative candidates for the biological synthesis of NPs (also considered as green synthesis). Among these biological methods, endophytic microorganisms have been widely used to synthesize NPs with low metallic ions, which opens a new possibility on the edge of biological nanotechnology. In this review, we will have discussed the different methods of synthesis of NPs, such as top-down, bottom-up, and green synthesis (specially including endophytic microorganisms) methods, their mechanisms, different forms of NPs, such as magnesium oxide nanoparticles (MgO-NPs), copper nanoparticles (Cu-NPs), chitosan nanoparticles (CS-NPs), β-d-glucan nanoparticles (GNPs), and engineered nanoparticles (quantum dots, metalloids, nonmetals, carbon nanomaterials, dendrimers, and liposomes), and their molecular approaches in various aspects. At the molecular level, nanoparticles, such as mesoporous silica nanoparticles (MSN) and RNA-interference molecules, can also be used as molecular tools to carry genetic material during genetic engineering of plants. In plant disease management, NPs can be used as biosensors to diagnose the disease.

Amelioration of Pterostilbene Antiproliferative, Proapoptotic, and Oxidant Potentials in Human Breast Cancer MCF7 Cells Using Zein Nanocomposites

Purpose

This study aimed to explain the influence of zein nanosphere (ZN NS) formulation on the pharmacotherapeutic profile of PTS in MCF7 cells.

Methods

Liquid–liquid phase separation was used to formulate PTS-ZN NSs. The formulations developed were evaluated for particle-size analysis, encapsulation efficiency, and in vitro diffusion. Also, assays of cytotoxicity, uptake, cell-cycle progression, annexin V, apoptotic gene mRNA expression and biochemical assays were carried out.

Results

The PTS-ZN NS formulation selected showed 104.5±6.2 nm, 33.4±1.8 mV, 95.1%±3.6%, and 89.1%±2.65% average particle size, zeta-potential, encapsulation efficiency and in vitro diffusion, respectively. With MCF7 cells, IC₅₀ was reduced approximately 15-fold, with increased cellular uptake, accumulation in the G₂/M phase, increased percentage of cells in the pre-G₁ phase, amelioration of early and late apoptosis, raised mRNA expression of CASP3 and CASP7, lower expression of cyclin-CDK1, and enhanced oxidant potential through decreased glutathione reductase (GR) activity, and enhanced reactive oxygen–species generation and lipid-peroxidation products.

Conclusion

PTS-ZN NSs indicated enhanced antiproliferative, proapoptotic, and oxidant potential toward MCF7 cells compared to free PTS. Ameliorated results of nanosized carriers, cellular uptake, and sustained diffusion may contribute to these outcomes.

Attenuation of lipid levels in triton induced hyperlipidemia rats through rosuvastatin calcium nanoparticles: Pharmacokinetic and pharmacodynamic studies

The aim of this research was to study the effect of marketed tablet (Crestor®) powder suspension (MTPS) and nanoparticle formulation of rosuvastatin calcium (RC) on the pharmacokinetic (PK) and pharmacodynamic (PD) parameters in hyperlipidemia rats. The hyperlipidemia is induced by intraperitoneal injection of Triton-X-100 in 0.9 %w/v saline solution. The marketed tablet was dispersed into suspension. The RC loaded nanoparticles (RC-NPs) are prepared by homogenization method. The prepared RC-NP formulation was characterized for size, drug excipient compatibility and crystallization by differential scanning calorimeter (DSC), morphology by SEM, stability at room temperature, in-vitro dissolution and in-situ absorption in rats. Further, the pharmacokinetic and pharmacodynamic studies were conducted in hyperlipidemia rats. The size of the RC-NP formulation was found to be 183.4 ± 4.5 nm and to be nearly spherical by SEM. DSC studies revealed that no interaction and RC converted to amorphous form in RC-NP formulation. RC-NP formulation was physically and chemically stable over two months at room temperature. The drug release was found to be 25.8 ± 2.5 and 89.96 ± 2.8 % in five mins, respectively from MTPS and RC-NP formulations. The P_eff of MTPS and NP of RC was 1.8 ± 0.2 × 10^-5 and 2.7 ± 0.3 × 10^-5 cm/s, respectively. From the PK studies, the enhancement in the oral bioavailability was found to be 2.4-folds when compared to MTPS formulation and statistically significant (p < 0.05). PD study of RC-NP formulation in hyperlipidemic rats exhibited decrease in lipid profile for 24 h, while MTPS exhibited a decrease in lipid profile for 12 h. Therefore, the results conclusively demonstrate the nanoparticles of RC showed significant enhancement in the PK and PD parameters.

In vitro-in vivo correlation in the effect of cyclodextrin on oral absorption of poorly soluble drugs

In this study the concentration effect of 2-Hydroxypropyl-beta-cyclodextrin (HP-βCyD) on oral drug absorption of the BCS class II drugs Danazol (DNZ) and Albendazole (ABZ) was evaluated. In vitro permeation of solutions and suspension systems was compared with their in vivo intestinal absorption in rats and their in vitro-in vivo correlation assessed. In solutions excess amounts of HP-βCyD decreased both in vitro permeation and in vivo absorption due to the decrease in free drug concentration, as expected. However, in suspension systems the contribution of HP-βCyD by drug complexation was found to be altered by further rate limiting steps for membrane permeation and intestinal absorption of each drug. In vitro permeation of DNZ was rate-limited by the diffusion into the unstirred water layer (UWL), while that of ABZ was rate-limited by the permeation across the lipid membrane. For the in vivo intestinal absorption, both drugs were rate-limited by the dissolution rate from undissolved drug. These differences in the rate-limiting process were considered to cause discrepancies in the result of in vitro and in vivo assays. In conclusion, it is quite important to understand the rate limiting process of oral absorption of the target drug for designing oral liquid formulations containing cyclodextrins.

Augmentation of anti-proliferative, pro-apoptotic and oxidant profiles induced by piceatannol in human breast carcinoma MCF-7 cells using zein nanostructures

Piceatannol (PCT), a natural polyphenolic stilbene, has pleiotropic pharmacological potentials. It possesses cytotoxic activities toward variant cancerous cells. Zein nanospheres (ZN NSs) have been introduced as ideal nanostructures due to their natural origin, safety, histocompatibility. and convenient method of formulation. The purpose of this study was to explore the impact of PCT-ZN NSs formula on pharmacotherapy potential of PCT against human breast cancer MCF-7 cells. PCT-ZN NSs were formulated and characterized selectively to particle size, zeta potential, encapsulation efficiency and diffusion of PCT. The selected formula has a particle size of 84.4 ± 2.3 nm, zeta potential value of 33.8 ± 1.2 mV and encapsulation efficiency of 89.5 ± 4.1%. PCT-ZN NSs displayed significantly lower IC₅₀ against MCF-7 cells by about 24 folds. Further, PCT-ZN NSs formula showed higher cellular uptake as compared to free PCT. Examination of cell cycle phases displayed cells accumulation in G2-M phase and increased percentage cells in pre-G1 phase indicating an apoptosis-enhancing activity. Annexin V staining indicated augmented early and late apoptosis. PCT-ZN NSs pro-apoptotic activity was confirmed by the observed significant increased mRNA expression of CASP3, p53, and Bax as well as decreased expression of Bcl2. In addition, PCT-ZN NSs induced oxidative stress as evidenced by depletion of glutathione reductase (GR) activity, increased generation of reactive oxygen species (ROS) and accumulation of lipid peroxidation products. Conclusively, ZN nanostructures of PCT revealed superior cell death-inducing activities against MCF-7 cells in comparison with free PCT. This is mediated, at least partly, by enhanced cellular uptake, pro-apoptotic activity, and oxidative stress potential.

A One-Step Twin-Screw Melt Granulation with Gelucire 48/16 and Surface Adsorbent to Improve the Solubility of Poorly Soluble Drugs: Effect of Formulation Variables on Dissolution and Stability

Fenofibrate is an effective lipid-lowering drug; however, its poor solubility and high log p (5.2) result in insufficient absorption from the gastrointestinal tract, leading to poor bioavailability. In this study, a one-step continuous twin-screw melt granulation process was investigated to improve the solubility and dissolution of fenofibrate using Gelucire® 48/16 and Neusilin® US2 as the solubilizer and surface adsorbent, respectively. The formulations (granules) were prepared at different ratios of fenofibrate, Gelucire® 48/16, and Neusilin® US2 based on phase-solubility studies and characterized using dissolution, differential scanning calorimetry, powder X-ray diffraction, and scanning electron microscopy analyses and studies on flow properties. In the phase-solubility studies, a linear relation was observed between Gelucire® 48/16 concentration and the amount of fenofibrate dissolved. In contrast, the dissolution rate of the prepared formulations was independent of the fenofibrate: Gelucire® 48/16 ratio and dependent on the Neusilin® US2 levels in the formulation. Increasing Neusilin® US2 levels decreased the rate of dissolution of the granules but improved the stability of the tablets under storage at accelerated stability conditions. Interestingly, higher Gelucire® 48/16 levels in the granules resulted in tablets with a hard matrix, which slowed disintegration and dissolution. All formulations exhibited improved dissolution compared to pure fenofibrate.

Size-dependent solution-mediated phase transformation of piroxicam monohydrate particles

The transformation from the piroxicam monohydrate to form I or form II could be achieved precisely by adjusting the particle size itself in the 99% acetone-1% H₂O solvent at 31 °C.

Freeze-Dried Clopidogrel Loaded Lyotropic Liquid Crystal: Box-Behnken Optimization, In-Vitro and In-Vivo Evaluation

BACKGROUND

Clopidogrel (CLP) suffers from extensive first pass metabolism results in a negative impact on its oral systemic bioavailability. Cubosomes are Lyotropic Liquid Crystalline (LLC) nano-systems comprising monoolein, a steric stabilizer and an aqueous system, it considered a promising carrier for different pharmaceutical compounds. Box-Behnken Design (BBD) is an efficient tool for process analysis and optimization skipping forceful treatment combinations.

OBJECTIVE

The study was designed to develop freeze-dried clopidogrel loaded LLC (cubosomes) for enhancement of its oral bioavailability.

METHODS

A 3³ BBD was adopted, the studied independent factors were glyceryl monooleate (GMO lipid phase), Pluronic F127 (PL F127steric stabilizer) and polyvinyl alcohol powder (stabilizer). Particle Size (PS), Polydispersity Index (PDI) and Zeta Potential (ZP) were set as independent response variables. Seventeen formulae were prepared in accordance with the bottom up approach and in-vitro evaluated regarding PS, PDI and ZP. Statistical analysis and optimization were achieved using design expert software®, then the optimum suggested formula was prepared, in-vitro revaluated, freeze-dried with 3% mannitol (cryoprotectant), solid state characterized and finally packed in hard gelatin capsule for comparative in-vitro release and in-vivo evaluation to Plavix®.

RESULTS

Results of statistical analysis of each individual response revealed a quadratic model for PS and PDI where a linear model for ZP. The optimum suggested formula with desirability factor equal 0.990 consisting of (200 mg GMO, 78.15 mg PL F127 and 2% PVA). LC/MS/MS study confirmed significant higher C_max, AUC_0-24h and AUC_0-∞ than that of Plavix®.

CONCLUSION

The results confirm the capability of developed carrier to overcome the low oral bioavailability.

Oral Nano Drug Delivery Systems for the Treatment of Type 2 Diabetes Mellitus: An Available Administration Strategy for Antidiabetic Phytocompounds

In view of the worldwide serious health threat of type 2 diabetes mellitus (T2DM), natural sources of chemotherapies have been corroborated as the promising alternatives, with the excellent antidiabetic activities, bio-safety, and more cost-effective properties. However, their clinical application is somewhat limited, because of the poor solubility, instability in the gastrointestinal tract (GIT), low bioavailability, and so on. Nowadays, to develop nanoscaled systems has become a prominent strategy to improve the drug delivery of phytochemicals. In this review, we primarily summarized the intervention mechanisms of phytocompounds against T2DM and presented the recent advances in various nanosystems of antidiabetic phytocompounds. Selected nanosystems were grouped depending on their classification and structures, including polymeric NPs, lipid-based nanosystems, vesicular systems, inorganic nanocarriers, and so on. Based on this review, the state-of-the-art nanosystems for phytocompounds in T2DM treatment have been presented, suggesting the preponderance and potential of nanotechnologies.

Three-dimensional aspects of formulation excipients in drug discovery: a critical assessment on orphan excipients, matrix effects and drug interactions

Formulation/pharmaceutical excipients play a major role in formulating drug candidates, with the objectives of ease of administration, targeted delivery and complete availability. Many excipients used in pharmaceutical formulations are orphanized in preclinical drug discovery. These orphan excipients could enhance formulatability of highly lipophilic compounds. Additionally, they are safe in preclinical species when used below the LD50 values. However, when the excipients are used in formulating compounds with diverse physico-chemical properties, they pose challenges by modulating study results through their bioanalytical matrix effects. Excipients invariably present in study samples and not in the calibration curve standards cause over-/under- estimation of exposures. Thus, the mechanism by which excipients cause matrix effects and strategies to nullify these effects needs to be revisited. Furthermore, formulation excipients cause drug interactions by moderating the pathways of drug metabolizing enzymes and drug transport proteins. Although it is not possible to get rid of excipient driven interactions, it is always advised to be aware of these interactions and apply the knowledge to draw meaningful conclusions from study results. In this review, we will comprehensively discuss a) orphan excipients that have wider applications in preclinical formulations, b) bioanalytical matrix effects and possible approaches to mitigating these effects, and c) excipient driven drug interactions and strategies to alleviate the impacts of drug interactions.

Advances and perspectives in carrier-free nanodrugs for cancer chemo-monotherapy and combination therapy

Nanocarrier-based drug delivery systems hold impressive promise for biomedical application because of their excellent water dispersibility, prolonged blood circulation time, increased drug accumulation in tumors, and potential in combination therapeutics. However, most nanocarriers suffer from low drug-loading efficiency, poor therapeutic effectiveness, potential systematic toxicity, and unstable metabolism. As an alternative, carrier-free nanodrugs, completely formulated with one or more drugs, have attracted increasing attention in cancer therapy due to their advantage of improved pharmacodynamics/pharmacokinetics, reduced toxicity, and high drug-loading. In recent years, carrier-free nanodrugs have contributed to progress in a variety of therapeutic modalities. In this review, different common strategies for carrier-free nanodrugs preparation are first summarized, mainly including nanoprecipitation, template-assisted nanoprecipitation, thin-film hydration, spray-drying technique, supercritical fluid (SCF) technique, and wet media milling. Then we describe the recently reported carrier-free nanodrugs for cancer chemo-monotherapy or combination therapy. The advantages of anti-cancer drugs combined with other chemotherapeutic, photosensitizers, photothermal, immunotherapeutic or gene drugs have been demonstrated. Finally, a future perspective is introduced to highlight the existing challenges and possible solutions toward clinical application of currently developed carrier-free nanodrugs, which may be instructive to the design of effective carrier-free regimens in the future.

Study of homogenization on media milling time in preparation of irbesartan nanosuspension and optimization using design of experiments (DoE)

Background

The present investigation aimed at preparing nanosuspension of irbesartan to improve its dissolution. Dissolution enhancement of irbesartan can improve the oral bioavailability. Here, it was also studied how media milling time can be reduced by subjecting irbesartan to prior homogenization and then media milling.

Results

First, homogenization of irbesartan was carried out in the presence of poloxamer 407 at 6000 rpm for 2 h. Final nanosuspension preparation was done by media milling with zirconium dioxide beads. Here, the amount of poloxamer 407 and zirconium dioxide beads was studied as statistical independent variables. Response surface plot analysis and desirability function were applied to the selected optimized batch. The prepared batches were subjected to evaluation for zeta potential value, mean particle size, PDI, dissolution study, and stability study. Target particle size was less than 500 nm, and in vitro dissolution in 10 min was more than 80%. Zeta potential value was ~ 27 mV for optimized nanosuspension. Desirability of 0.941 was achieved. Checkpoint batch was prepared and evaluated to confirm the validity of mathematical model. Accelerated stability study was performed on the optimized batch at 40 ± 2 °C/75 ± 5% RH for 6 months.

Conclusion

The results confirmed the stability of formulation at accelerated stability conditions. Using presuspension prepared by homogenization, media milling time primarily reduced from 24–28 h to 18 h. Future perspective is to study other factors in combination method in discrete.

Molecular Dynamics Simulations Reveal Membrane Interactions for Poorly Water-Soluble Drugs: Impact of Bile Solubilization and Drug Aggregation

Molecular transport mechanisms of poorly soluble hydrophobic drug compounds to lipid membranes were investigated using molecular dynamics (MD) simulations. The model compound danazol was used to investigate the mechanism(s) by which bile micelles delivered it to the membrane. The interactions between lipid membrane and pure drug aggregates-in the form of amorphous aggregates and nanocrystals-were also studied. Our simulations indicate that bile micelles formed in the intestinal fluid may facilitate danazol incorporation into cellular membranes through two different mechanisms. The micelle may be acting as: i) a shuttle that presents the danazol directly to the membrane or ii) an elevator that moves the solubilized danazol with it as the colloidal structure itself becomes incorporated and solubilized within the membrane. The elevator hypothesis was supported by complementary lipid monolayer adsorption experiments. In these experiments, colloidal structures formed with simulated intestinal fluid were observed to rapidly incorporate into the monolayer. Simulations of membrane interaction with drug aggregates showed that both the amorphous aggregates and crystalline nanostructures incorporated into the membrane. However, the amorphous aggregates solubilized more quickly than the nanocrystals into the membrane, thereby improving the danazol absorption.

Formulation and Nanotechnology-Based Approaches for Solubility and Bioavailability Enhancement of Zerumbone

About 40–70% of drug molecules in the clinical development pipeline suffer from one of either low aqueous solubility, poor absorption, or extremely low bioavailability. Approximately 75% of the world population relies on traditional therapies and therefore there has been a growing interest in the utilization of natural compounds. Zerumbone is one such natural compound, classified as a sesquiterpenoid that is extracted from the essential volatile oils of rhizomes from Zingiber zerumbet. It possesses strong antitumor, antioxidant, antimicrobial, and anti-inflammatory activity. However, despite promising preclinical studies demonstrating the therapeutic utility of zerumbone, its clinical development has been limited due to its low aqueous solubility, poor absorption, or associated low bioavailability. Multiple reviews demonstrating the pharmacological effects of zerumbone for various diseases have been published. However, to our knowledge, no review demonstrates the various formulation strategies developed to overcome the biopharmaceutical challenges of zerumbone. The purpose of this review is to provide a comprehensive perspective on zerumbone as a molecule for formulation development. A section related to pharmacokinetics, toxicity, and patents of zerumbone is included. This review provides the importance of developing novel formulations of zerumbone to overcome its biopharmaceutical challenges thereby advance its potential in the treatment of various diseases.

Preparation of Hot-Melt Extruded Dosage Form for Enhancing Drugs Absorption Based on Computational Simulation

The aim of this study was to control the dissolution rate and permeability of cilostazol. To enhance the dissolution rate of the active pharmaceutical ingredient (API), hot-melt extrusion (HME) technology was applied to prepare a solid dispersion (SD). To control permeability in the gastrointestinal tract regardless of food intake, the HME process was optimized based on physiologically based pharmacokinetic (PBPK) simulation. The extrudates were produced using a laboratory-scale twin-screw hot-melt extruder with co-rotatory screws and a constant feeding rate. Next, for PBPK simulation, parameter-sensitive analysis (PSA) was conducted to determine the optimization approach direction. As demonstrated by the dissolution test, the solubility of extrudate was enhanced comparing cilostazol alone. Based on the PSA analysis, the surfactant induction was a crucial factor in cilostazol absorption; thus, an extrudate with an even distribution of lipids was produced using hot-melt extrusion technology, for inducing the bile salts in the gastrointestinal tract. In vivo experiments with rats demonstrated that the optimized hot-melt extruded formulation was absorbed more rapidly with lower deviation and regardless of the meal consumed when compared to marketed cilostazol formulations.

Freeze-Drying of Pharmaceutical and Nutraceutical Nanoparticles: The Effects of Formulation and Technique Parameters on Nanoparticles Characteristics

Nanoparticles (NPs) are of the most interesting novel vehicles for effective drug delivery to humans. Freeze drying is known as an engaging process to improve the long lasting stability of NPs formulations. This study aims to elucidate the importance of various parameters involving in freeze-drying of the most common pharmaceutical/nutraceutical NPs including nanosuspensions, nanocrystals (NCs), cocrystals/nanococrystals, nanoemulsions (NEs), nanocapsules (NCPs) and nanospheres (NSPs). Regarding this, the therapeutic goals of NPs and specifications of drug must be considered. According to our survey, the most influential factors for achieving optimum results include type and concentration of cryoprotectant/lyoprotectant, stabilizer structure and concentration, the NPs concentration in solution, freezing, annealing, and drying rate, the interaction between protectants and stabilizer, solvent type and antisolvent to solvent ratio. The study shows that for each class of NPs, specific variables are of highest significance and should be optimized. For instance, about NCs, freezing rate and antisolvent/solvent ratio should be particularly considered and for emulsified NPs, the best results have been obtained by 5-20% of saccharides as cryoprotectants. These findings suggest that to obtain a product with the lowest aggregation and particle size (PS), optimization of the effective factors in formulation and lyophilization process are essential.

Intrinsic Dissolution Rate Profiling of Poorly Water-Soluble Compounds in Biorelevant Dissolution Media

The intrinsic dissolution rate (IDR) of active pharmaceutical ingredients (API) is a key property that aids in early drug development, especially selecting formulation strategies to improve dissolution and thereby drug absorption in the intestine. Here, we developed a robust method for rapid, medium throughput screening of IDR and established the largest IDR dataset in open literature to date that can be used for pharmaceutical computational modeling. Eighteen compounds with diverse physicochemical properties were studied in both fasted and fed state simulated intestinal fluids. Dissolution profiles were measured in small-scale experimental assays using compound suspensions or discs. IDR measurements were not solely linked to API solubility in either dissolution media. Multivariate data analysis revealed that IDR strongly depends on compound partitioning into bile salt and phospholipid micelles in the simulated intestinal fluids, a process that in turn is governed by API lipophilicity, hydrophobicity, and ionization.