Vibrational spectra and assignment of poly-(p-phenylene sulfide) and its oligomers

High-Performance Sodium-Ion Batteries Enabled by 3D Nanoflowers Comprised of Ternary Sn-Based Dichalcogenides Embedded in Nitrogen and Sulfur Dual-Doped Carbon

To make sodium-ion batteries a realistic option for everyday energy storage, a practicable method is to enhance the kinetics of Na+ reactions through the development of structurally stable electrode materials. This study utilizes ternary Sn-based dichalcogenide (SnS1.5 Se0.5 ) in the design of electrode material to tackle several issues that adversely hinder the performance and longevity of sodium-ion batteries. First, the incorporation of Se into the SnS structure enhances its electrical conductivity and stability. Second, the ternary composition restricts the formation of intermediates during the desodiation/sodiation process, resulting in better electrode reaction reversibility. Finally, SnS1.5 Se0.5 lowers the diffusion barrier of Na, thereby facilitating rapid and efficient ion transport within the electrode material. Moreover, nitrogen and sulfur dual-doped carbon (NS-C) is used to enhance surface chemistry and ionic/electrical conductivity of SnS1.5 Se0.5 , leading to a pseudocapacitive storage effect that presents a promising potential for high-performance energy storage devices. The study has successfully developed a SnS1.5 Se0.5 /NS-C anode, exhibiting remarkable rate capability and cycle stability, retaining a capacity of 647 mAh g-1 even after 10 000 cycles at 5 A g-1 in half-cell tests. In full-cell tests, Na3 V2 (PO4 )3 //SnS1.5 Se0.5 /NS-C delivers a high energy density of 176.6 Wh kg-1 . In addition, the Na+ storage mechanism of SnS1.5 Se0.5 /NS-C is explored through ex situ tests and DFT calculations. The findings suggest that the ternary Sn-based dichalcogenides can considerably enhance the performance of the anode, enabling efficient large-scale storage of sodium. These findings hold great promise for the advancement of high-performance energy storage devices for practical applications.

Improving Mechanical and Barrier Properties of Antibacterial Poly(Phenylene Sulfide) Nanocomposites Reinforced with Nano Zinc Oxide-Decorated Graphene

Nano zinc oxide-decorated graphene (G-ZnO) was blended with polyphenylene sulfide (PPS) to improve its tensile, thermal, crystalline, and barrier properties. The properties of neat PPS and PPS/G-ZnO nanocomposites were characterized and compared using various tests, including tensile tests, scanning electron microscopy, X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, evaluation of Escherichia coli inhibition, and barrier performance. The results demonstrated that G-ZnO played a crucial role in heterogeneous nucleation and reinforcement. When the concentration of G-ZnO was 0.3%, the tensile strength, elongation at break, thermostability, crystallinity, and water vapor permeability coefficients (WVPC) approached their maximum values, and the microscopic morphology changed from the original brittle fracture to a relatively tough fracture. In addition, when G-ZnO was added to PPS at a ratio of 0.3%, the tensile strength, elongation at break, and WVPC of PPS were increased by 129%, 150%, and 283%, respectively, compared to pure PPS. G-ZnO endowed the nanocomposites with antibacterial properties. The improvement in barrier performance can be attributed to three reasons: (1) the presence of G-ZnO extended the penetration path of molecules; (2) the coordination and hydrogen bonds between PPS polymer matrix and G-ZnO nanofiller narrowed the H₂O transmission path; and (3) due to its more hydrophobic surface, water molecules were less likely to enter the interior of PPS/G-ZnO nanocomposites. This study provides valuable insights for developing high-performance PPS-based nanocomposites for various applications.

Friction and wear characteristics of synthetic diamond and graphene-filled polyether ether ketone composites

Modifying tribo films using filler particles is a significant area of research in developing polymer-based tribo components to minimize material loss during the sliding process. This study focused on altering the wear characteristics of a polyetheretherketone (PEEK)/graphene high-performance polymer composite to strengthen the tribo film by adding synthetic diamond particles. The hot-pressed PEEK composite reinforced by graphene and diamond particles increased the hardness and thermal stability of the composite. Compared with pure PEEK, composites containing 1% graphene and 1% diamond particles showed an increment of 25% and 23% in hardness and thermal stability, respectively. Fourier-transform infrared spectroscopy and X-ray diffraction analysis verified the compatibility and intactness of the fillers in the PEEK matrix. The tribo properties of PEEK composites were characterized by a pin-on-disc tribometer on a counter steel surface. A PEEK composite containing 0.75 wt% graphene and 0.5 wt% diamond particles exhibited the lowest friction of 0.17 at a pressure of 1.5 MPa. The specific wear rate was low (1.78 × 10−6 mm3/Nm) for the composite containing 1 wt% graphene and 1 wt% diamond particles at a pressure of 1.5 MPa. Varying synthetic diamond and graphene filler concentrations in the PEEK matrix change the wear process by modifying the tribo film characteristics, revealing the lowest friction and wear rate. X-ray photoelectron and Raman spectroscopy show that the polymer film was transferred to the steel countersurface, and the tribo-chemical products of the tribo film contribute to a stable tribo film. The ferric oxide film and the tribo film improve the composite’s self-lubricating properties and load-bearing ability. Hence, the composite containing 0.75% of graphene and 0.5% of a synthetic diamond can be employed in the sliding bearing application of continuous conveyors used in mass production systems.

Novel Approach Through the Harmonized Sulfur in Disordered Carbon Structure for High-Efficiency Sodium-Ion Exchange

Sodium-ion batteries (SiBs) have recently attracted considerable interest due to the plentiful supply of raw materials for their production and their electrochemical behavior, which is similar to that of lithium-ion batteries (LiBs). However, the relatively larger radius of sodium ions than that of lithium ions is not suitable for storage in conventional graphite, which is widely used as the anode. To resolve this issue, in this study, we developed a new harmonized carbon material with a three-dimensional (3D) grapevine-like structure and a sulfur component using an efficient synthesis process. On the basis of these advantages, the harmonized sulfur-carbon material exhibited a highly reversible capacity of 146 mA h g^-1 at an extremely high specific current of 100 A g^-1 and long-term galvanostatic cycling stability at 10 and 100 A g^-1 with superior electrochemical performance. Our results are anticipated to provide new insights into SiB anode materials that would advance their production.

Dispersion-Assembly Approach to Synthesize Three-Dimensional Graphene/Polymer Composite Aerogel as a Powerful Organic Cathode for Rechargeable Li and Na Batteries

Polymer cathode materials are promising alternatives to inorganic counterparts for both lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs) due to their high theoretical capacity, adjustable molecular structure, and strong adaptability to different counterions in batteries, etc. However, they suffer from poor practical capacity and low rate capability because of their intrinsically poor conductivity. Herein, we report the synthesis of self-assembled graphene/poly(anthraquinonyl sufide) (PAQS) composite aerogel (GPA) with efficient integration of a three-dimensional (3D) graphene framework with electroactive PAQS particles via a novel dispersion-assembly strategy which can be used as a free-standing flexible cathode upon mechanical pressing. The entire GPA cathode can deliver the highest capacity of 156 mAh g^-1 at 0.1 C (1 C = 225 mAh g^-1) with an ultrahigh utilization (94.9%) of PAQS and exhibits an excellent rate performance with 102 mAh g^-1 at 20 C in LIBs. Furthermore, the flexible GPA film was also tested as cathode for SIBs and demonstrated a high-rate capability with 72 mAh g^-1 at 5 C and an ultralong cycling stability (71.4% capacity retention after 1000 cycles at 0.5 C) which has rarely been achieved before. Such excellent electrochemical performance of GPA as cathode for both LIBs and SIBs could be ascribed to the fast redox kinetics and electron transportation within GPA, resulting from the interconnected conductive framework of graphene and the intimate interaction between graphene and PAQS through an efficient wrapping structure. This approach opens a universal way to develop cathode materials for powerful batteries with different metal-based counter electrodes.

Poly(benzoquinonyl sulfide) as a High-Energy Organic Cathode for Rechargeable Li and Na Batteries

In concern of resource sustainability and environmental friendliness, organic electrode materials for rechargeable batteries have attracted increasing attentions in recent years. However, for many researchers, the primary impression on organic cathode materials is the poor cycling stability and low energy density, mainly due to the unfavorable dissolution and low redox potential, respectively. Herein, a novel polymer cathode material, namely poly(benzoquinonyl sulfide) (PBQS) is reported, for either rechargeable Li or Na battery. Remarkably, PBQS shows a high energy density of 734 W h kg^-1 (2.67 V × 275 mA h g^-1) in Li battery, or 557 W h kg^-1 (2.08 V × 268 mA h g^-1) in Na battery, which exceeds those of most inorganic Li or Na intercalation cathodes. Moreover, PBQS also demonstrates excellent long-term cycling stability (1000 cycles, 86%) and superior rate capability (5000 mA g^-1, 72%) in Li battery. Besides the exciting battery performance, investigations on the structure-property relationship between benzoquinone (BQ) and PBQS, and electrochemical behavior difference between Li-PBQS battery and Na-PBQS battery, also provide significant insights into developing better Li-organic and Na-organic batteries beyond conventional Li-ion batteries.

Electrochemical Properties of Poly(Anthraquinonyl Sulfide)/Graphene Sheets Composites as Electrode Materials for Electrochemical Capacitors

Poly(anthraquinonyl sulfide) (PAQS)/graphene sheets (GSs) composite was synthesized through in situ polymerization to evaluate its performance as an electrode material for electrochemical capacitors. PAQS was successfully synthesized in the presence of GSs with uniform distribution. PAQS/GSs showed a pair of reversible redox peaks at around 0 V (vs. Ag/AgCl). The specific capacitance of PAQS/GSs was 349 F·g⁻¹ (86 mAh·g⁻¹) at a current density of 500 mA·g⁻¹, and a capacitance of 305 F·g⁻¹ was maintained even at a high current density of 5000 mA·g⁻¹. The in situ polymerization of PAQS with GSs facilitated their interaction and enabled faster charge transfer and redox reaction, resulting in enhanced electrode properties.