PC12 cell aggregation and neurite growth in gels of collagen, laminin and fibronectin

Cyanidin Ameliorates Bisphenol A-Induced Alzheimer's Disease Pathology by Restoring Wnt/β-Catenin Signaling Cascade: an In Vitro Study

Alzheimer's disease (AD) is a progressive neurodegenerative disorder causing memory loss and cognitive decline, linked to amyloid-beta (Aβ) plaques and hyperphosphorylated tau protein accumulation in the brain. Environmental pollutant bisphenol A (BPA) has been implicated in AD pathology due to its neurotoxic effects. This study aims to evaluate cyanidin from flower bracts of Musa acuminata Colla (red variety; AAA group) for its neuroprotective properties against BPA-induced AD pathology. The extraction of cyanidin was optimized using 70% ethanol in acidified water, showing promising anti-acetylcholinesterase activity. Cyanidin was effectively purified from the resultant extract and characterized using spectroscopic techniques. Two gradient doses of cyanidin (90 and 10 µg/ml) were determined based on cell viability assay. The role of cyanidin in promoting nerve growth and differentiation was assessed in PC12 cells for up to 72 h. A discernible and statistically significant difference was assessed in neurite extension at both doses at 72 h, followed by pre-treatment with cyanidin. BPA stimulation significantly increased the p-tau expression compared to the control (p < 0.0001). Pre-treatment with cyanidin reduced the tau expression; however, a significant difference was observed compared to control cells (p = 0.0003). Cyanidin significantly enhanced the mRNA expression of Wnt3a (p < 0.0001), β-catenin (p = 0.0004), and NeuroD1 (p = 0.0289), and decreased the expression of WIF1(p = 0.0040) and DKK1 (p < 0.0001), which are Wnt antagonist when compared to cells stimulated with BPA. Conclusively, our finding suggests that cyanidin could agonize nerve growth factor and promote neuronal differentiation, reduce tau-hyperphosphorylation by restoring the Wnt/β-catenin signaling cascade, and thereby render its neuroprotective potential against BPA-induced AD pathology.

Designing a bioactive scaffold from coassembled collagen–laminin short peptide hydrogels for controlling cell behaviour

Exploring the potential of bifunctional collagen–laminin mimetic peptide based co-assembling gels for cell culture applications.

Developing an In Vitro Model to Screen Drugs for Nerve Regeneration

Peripheral nerve injuries (PNI) have a high prevalence and can be debilitating, resulting in life‐long loss or disturbance in end‐organ function, which compromises quality of life for patients. Current therapies use microsurgical approaches but there is the potential for enhancing recovery through other therapeutic modalities such as; cell‐based conduits, gene therapy and small molecules. A number of molecular targets and drugs which have the potential to improve nerve regeneration have been identified, however, there are challenges associated with moving therapies toward clinical translation. Due to the lack of detailed knowledge about the pro‐regenerative effect of potential drug treatments, there is a need for effective in vitro models to screen compounds to inform future pre‐clinical and clinical studies. The interaction between regenerating neurites and supporting Schwann cells is a key feature of the nerve environment, therefore, in vitro models that mimic this cellular association are useful tools. In this study, we have investigated various cell culture models, including simple monolayer systems and more complex 3D‐engineered co‐cultures, as models for use in PNI drug development. Anat Rec, 301:1628–1637, 2018. © 2018 The Authors. The Anatomical Record published by Wiley Periodicals, Inc. on behalf of American Association of Anatomists.

Fibronectin Promotes Survival and Migration of Primary Neural Stem Cells Transplanted into the Traumatically Injured Mouse Brain

Multipotential stem cells are an attractive choice for cell therapy after traumatic brain injury (TBI), as replacement of multiple cell types may be required for functional recovery. In the present study, neural stem cells (NSCs) derived from the germinal zone of E14.5 GFP-expressing mouse brains were cultured as neurospheres in FGF2-enhanced medium. When FGF2 was removed in vitro, NSCs expressed phenotypic markers for neurons, astrocytes, and oligodendrocytes and exhibited migratory behavior in the presence of adsorbed fibronectin (FN). NSCs (105 cells) were transplanted into mouse brains 1 week after a unilateral, controlled, cortical contusion (depth = 1 mm, velocity = 6 m/s, duration = 150 ms) (n = 19). NSCs were injected either directly into the injury cavity with or without an injectable FN-based scaffold [collagen I (CnI)/ FN gel; n = 14] or into the striatum below the injury cavity (n = 5). At all time points examined (1 week to 3 months posttransplant), GFP+ cells were confined to the ipsilateral host brain tissue. At 1 week, cells injected into the injury cavity lined the injury penumbra while cells inserted directly into the striatum remained in or around the needle track. Striatal transplants had a lower number of surviving GFP+ cells relative to cavity injections at the 1 week time point (p < 0.01). At the longer survival times (3 weeks–3 months), 63–76% of transplanted cells migrated into the fimbria hippocampus regardless of injection site, perhaps due to cues from the degenerating hippocampus. Furthermore, cells injected into the cavity within a FN-containing matrix showed increased survival and migration at 3 weeks (p < 0.05 for both) relative to injections of cells alone. These results suggest that FGF2-responsive NSCs present a promising approach for cellular therapy following trauma and that the transplant location and environment may play an important role in graft survival and integration.

In Vivo Evaluation of Pharmacologically Active Microcarriers Releasing Nerve Growth Factor and Conveying PC12 Cells

Cell therapy will probably become a major therapeutic strategy in the coming years. Nevertheless, few cells survive transplantation when employed as a treatment for neuronal disorders. To address this problem, we have developed a new tool, the pharmacologically active microcarriers (PAM). PAM are biocompatible and biodegradable microparticles coated with cell adhesion molecules, conveying cells on their surface and presenting a controlled delivery of growth factor. Thus, the combined effect of growth factor and coating influences the transported cells by promoting their survival and differentiation and favoring their integration in the host tissue after their complete degradation. Furthermore, the released factor may also influence the microenvironment. In this study, we evaluated their efficacy using nerve growth factor (NGF)-releasing PAM and PC12 cells, in a Parkinson's disease paradigm. After implantation of NGF-releasing or unloaded PAM conveying PC12 cells, or PC12 cells alone, we studied cell survival, differentiation, and apoptosis, as well as behavior of the treated rats. We observed that the NGF-releasing PAM coated with two synthetic peptides (poly-D-lysine and fibronectin-like) induced PC12 cell differentiation and reduced cell death and proliferation. Moreover, the animals receiving this implant presented an improved amphetamine-induced rotational behavior. These findings indicate that PAM could be a promising strategy for cell therapy of neurological diseases and could be employed in other situations with fetal cell transplants or with stem cells.

Enhancement of neurite adhesion, alignment and elongation on conductive polypyrrole-poly(lactide acid) fibers with cell-derived extracellular matrix

Extracellular matrix (ECM) can promote peripheral nerve repair. In this study, a conductive fiber-film (CFF) with core-sheath structure and conductivity of ∼10Scm^-1 was prepared by electrospinning of aligned poly(l-lactide acid) (PLLA) fibers and electrochemical deposition of polypyrole (PPy) nanoparticles. Then the multiple components of ECM, including laminin, fibronectin and collagen, were coated on the surface of CFF by culturing and lysing L929 cells to fabricate the bioactive scaffold of ECM-linked CFF (ECM-CFF). The electrical stimulation (ES) of 100mV/cm for 14days and 2h per day did not significantly decrease the conductivity of ECM-CFF. The results of PC12 cells test indicated that, cells adhesion rate, neurite-bearing cell rate and neurite alignment rate on ECM-CFF were ∼95%, ∼77%, ∼70%, respectively, significantly larger than the corresponding values on bare CFF (17%, 29% and 14%, respectively). The neurites length on ECM-CFF (∼79mm) was also larger than that on bare CFF (∼25mm). ES of 100mV/cm onto PC12 cells through ECM-CFF could significantly promote neurite extension in first 3days of the neurite growth. These results indicated that, the combination of ECM-CFF with ES could improve the nerve regeneration by encouraging neural-cell adhesion, neurite growth and extension.

Thermoresponsive substrates used for the expansion of human mesenchymal stem cells and the preservation of immunophenotype

The facile regeneration of undifferentiated human mesenchymal stem cells (hMSCs) from thermoresponsive surfaces facilitates the collection of stem cells avoiding the use of animal derived cell detachment agents commonly used in cell culture. This communication proposes a procedure to fabricate coatings from commercially available pNIPAm which is both affordable and a significant simplification on alternative approaches used elsewhere. Solvent casting was used to produce films in the micrometer range and successful cell adhesion and proliferation was highly dependent on the thickness of the coating produced with 1 μm thick coatings supporting cells to confluence. 3T3 cell sheets and hMSCs were successfully detached from the cast coatings upon temperature reduction. Furthermore, results indicate that the hMSCs remained undifferentiated as the surface receptor profile of hMSCs was not altered when cells were detached in this manner.

Identification of adequate vehicles to carry nerve regeneration inducers using tubulisation

BACKGROUND

Axonal regeneration depends on many factors, such as the type of injury and repair, age, distance from the cell body and distance of the denervated muscle, loss of surrounding tissue and the type of injured nerve. Experimental models use tubulisation with a silicone tube to research regenerative factors and substances to induce regeneration. Agarose, collagen and DMEM (Dulbecco's modified Eagle's medium) can be used as vehicles. In this study, we compared the ability of these vehicles to induce rat sciatic nerve regeneration with the intent of finding the least active or inert substance. The experiment used 47 female Wistar rats, which were divided into four experimental groups (agarose 4%, agarose 0.4%, collagen, DMEM) and one normal control group. The right sciatic nerve was exposed, and an incision was made that created a 10 mm gap between the distal and proximal stumps. A silicone tube was grafted onto each stump, and the tubes were filled with the respective media. After 70 days, the sciatic nerve was removed. We evaluated the formation of a regeneration cable, nerve fibre growth, and the functional viability of the regenerated fibres.

RESULTS

Comparison among the three vehicles showed that 0.4% agarose gels had almost no effect on provoking the regeneration of peripheral nerves and that 4% agarose gels completely prevented fibre growth. The others substances were associated with profuse nerve fibre growth.

CONCLUSIONS

In the appropriate concentration, agarose gel may be an important vehicle for testing factors that induce regeneration without interfering with nerve growth.

Comparison of neurite growth in three dimensional natural and synthetic hydrogels

Extracellular matrix incorporated within a scaffold plays an important role in assisting cell behavior in neural tissue engineering. In this study, we investigated how the concentration of fibronectin (FN) affected neurite growth when incorporated within a synthetic polymer gel made of poly(ethylene glycol) (PEG) or a natural polymer gel of collagen I. Mechanical and chemical properties of the scaffold were varied by using a range of concentrations of gels and FN. Rheology was used to determine the mechanical stiffness of hydrogels and neurite length and viability were measured to evaluate cell response. In both types of gels, increasing the concentration of the base scaffold (PEG or collagen) increased the mechanical stiffness as denoted by G∗. Neurite lengths in PEG gels increased with increasing FN concentration and decreased with increasing G∗. In collagen gels, FN reduced neurite extension for the lowest concentrations of collagen (0.4-0.6 mg/mL) while FN increased neurite extension for mid and high collagen concentrations (1.0-2.0 mg/mL). The results from these two different scaffolds indicate that both stiffness and FN concentration impact the growth of the neurite and that the addition of small amounts of FN (100 μg/ml) permits PEG gels to perform on par with similar stiffness collagen gels.

Electroactive electrospun polyaniline/poly[(L-lactide)-co-(ε-caprolactone)] fibers for control of neural cell function

Blends of PAni and PLCL are electrospun to prepare uniform fibers for the development of electrically conductive, engineered nerve grafts. PC12 cell viability is significantly higher on RPACL fibers than on PLCL-only fibers, and the electrical conductivity of the fibers affects the differentiation of PC12 cells; the number of cells positively-stained and their expression level are significantly higher on RPACL fibers. PC12 cell bodies display an oriented morphology with outgrowing neurites. On RPACL fibers, the expression level of paxillin, cdc-42, and rac is positively affected and proteins including RhoA and ERK exist as more activated state. These results suggest that electroactive fibers may hold promise as a guidance scaffold for neuronal tissue engineering.

Modular poly(ethylene glycol) scaffolds provide the ability to decouple the effects of stiffness and protein concentration on PC12 cells

This research focused on developing a modular poly(ethylene glycol) (PEG) scaffold, assembled from PEG microgels and collagen I, to provide an environment to decouple the chemical and mechanical cues within a three-dimensional scaffold. We first characterized the microgel fabrication process, examining the size, polydispersity, swelling ratio, mesh size and storage modulus of the polymer particles. The resulting microgels had a low polydispersity index, PDI=1.08, and a diameter of ~1.6 μm. The mesh size of the microgels, calculated from the swelling ratio, was 47.53 Å. Modular hydrogels (modugels) were then formed by compacting N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride/N-hydroxysuccinimidyl group-activated microgels with PEG-4arm-amine and 0, 1, 10, or 100 μg ml(-1) collagen. The stiffness (G(∗)) of the modugels was not significantly altered with the addition of collagen, allowing for modification of the chemical environment independent from the mechanical properties of the scaffold. PC12 cell aggregation increased in modugels as collagen concentrations increased and cell viability in modugels was improved over bulk PEG hydrogels. Overall, these results indicate that further exploration of modular scaffolds formed from microgels could allow for a better understanding of the relationship between the chemical and mechanical properties and cellular behavior.

Aggregation promotes cell viability, proliferation, and differentiation in an in vitro model of injection cell therapy

Many cell therapy approaches aim to deliver high-density single-cell suspensions to diseased or injured sites in the body. Long term clinical success will in part be dependent on the cells that remain viable and that assume correct functionality post-administration. The research presented in this paper focuses on the potential of cell aggregate delivery to generate a more supportive environment for cells than single cell suspensions. An in vitro model of injection delivery of C2C12 myoblast cells showed a significant difference in cell function and phenotype between adhesive collagen and non-adhesive alginate, indicating that in vitro assays based on this approach can discriminate between cell-cell/cell-matrix interactions and could be valuable when assessing cell therapy systems. Contrary to single cells, aggregates maintain viability, cellular activity, and phenotype beyond that of single cells, even in non-adhesive matrices, enabling delivery of higher cell densities with enhanced proliferative and differentiation capacity.

Repairing injured peripheral nerves: Bridging the gap

Peripheral nerve injuries that induce gaps larger than 1-2 cm require bridging strategies for repair. Autologous nerve grafts are still the gold standard for such interventions, although alternative treatments, as well as treatments to improve the therapeutic efficacy of autologous nerve grafting are generating increasing interest. Investigations are still mostly experimental, although some clinical studies have been undertaken. In this review, we aim to describe the developments in bridging technology which aim to replace the autograft. A multi-disciplinary approach is of utmost importance to develop and optimise treatments of the most challenging peripheral nerve injuries.

Optimal neural differentiation and extension of hybrid neuroblastoma cells (NDC) for nerve-target evaluations using a multifactorial approach

In vitro models of tissues, such as the cornea, represent systems for modeling cell-to-cell interactions and tissue function. The objective of this study was to develop an optimized nerve differentiation medium to incorporate into a 3D in vitro model to study innervation and cell targeting. A hybrid neuroblastoma cell line (NDC) was examined for its ability to differentiate into neurons, produce neurites, and functionally contact target cells. Neuronal differentiation of NDCs was optimized through a combinatorial approach which involved culturing cells in the presence of various extracellular matrices and soluble factors. A serum-free medium containing nerve growth factor (NGF), dimethyl sulfoxide (DMSO), or dexamethasone resulted in the greatest proportion of NDCs demonstrating a neuronal morphology. Similarly, with supplementation of cyclic AMP (cAMP) or NGF, neurite extension was optimized. Combining these factors generated an optimized differentiation and extension medium, relative to the individual components alone. In co-culture with epithelial cells, NDC neurites generated in the optimized medium formed contacts with epithelial targets and produced substance P. Similarly, NDCs seeded into a collagen matrix produced neurites that projected through the matrix to target epithelial cells, promoted epithelial stratification, and increased the rate of epithelial wound healing. As well, differentiated NDCs could target and alter acetylcholine receptor clustering in mouse C2C12 myotubes, demonstrating synaptic plasticity. Our data supports the use of NDCs, in combination with optimized medium, for generating an innervated in vitro model.

Quantitative assessment of neuronal differentiation in three-dimensional collagen gels using enhanced green fluorescence protein expressing PC12 pheochromocytoma cells

There is a paucity of quantitative methods for evaluating the morphological differentiation of neuronal cells in a three-dimensional (3-D) system to assist in quality control of neural tissue engineering constructs for use in reparative medicine. Neuronal cells tend to aggregate in the 3-D scaffolds, hindering the application of two-dimensional (2-D) morphological methods to quantitate neuronal differentiation. To address this problem, we developed a stable transfectant green fluorescence protein (GFP)-PC12 neuronal cell model, in which the differentiation process in 3-D can be monitored with high sensitivity by fluorescence microscopy. Under 2-D conditions, the green cells showed collagen adherence, round morphology, proliferation properties, expression of the nerve growth factor (NGF) receptors TrkA and p75(NTR), stimulation of extracellular signal-regulated kinase phosphorylation by NGF and were able to differentiate in a dose-dependent manner upon NGF treatment, like wild-type (wt)-PC12 cells. When grown within 3-D collagen gels, upon NGF treatment, the GFP-PC12 cells differentiated, expressing long neurite outgrowths. We describe here a new validated method to measure NGF-induced differentiation in 3-D. Having properties similar to those of wt-PC12 and an ability to grow and differentiate in 3-D structures, these highly visualized GFP-expressing PC12 cells may serve as an ideal model for investigating various aspects of differentiation to serve in neural engineering.

Contrasting effects of collagen and bFGF-2 on neural cell function in degradable synthetic PEG hydrogels

Injectable biodegradable cell carriers provide a potential means to improve transplanted cell viability in the nervous system by providing physical protection from compaction, shear forces, and the acute inflammatory response that occurs following transplantation into the host brain environment. Synthetic polyethylene glycol (PEG) hydrogels are ideal candidates for this purpose, as the degradation profile and mechanical properties of the gel can be controlled. Here we introduce biological components into the synthetic gel with the goal of improving neural cell function in the inert PEG environment. In this study, it was found that (1) bFGF-2 is a survival/mitogenic factor for neural precursor cells in degradable hydrogel cultures, (2) collagen has no measurable effect on cell survival, metabolic activity, or proliferation, and (3) co-application of collagen and bFGF-2 to hydrogel cultures targets cell survival and metabolic activity, an effect that is different than either applied individually. Because collagen and bFGF-2 support the survival and growth of neural cells and other cell types, the co-encapsulation approach and functional characterization described in this study can be extended to the development of an array of tissue engineering applications. These findings suggest the importance of understanding and developing strategies to control the chemical microenvironment surrounding cells in three-dimensional biomaterials.

Superior survival and durability of neurons and astrocytes on 3-dimensional aragonite biomatrices

Current needs of central nervous system therapy urge for the identification of scaffolds supporting the generation and long-term maintenance of healthy and functional neuronal tissue. We compared for the first time the viability of hippocampal neurons and astrocytes grown on conventional 2-dimensional (2D) conditions with that of cells grown on an aragonite bioactive 3-dimensional (3D) scaffold prepared from coralline exoskeleton. Cultures in 3D showed significantly lower mortality rate and higher neurons/astrocytes ratio than 2D cultures. Moreover, whereas cell survival in 2D was arrested in the absence of the supporting substrates poly-D-lysine and laminin, these substrates had negligible effect on the 3D cultures. Furthermore, aragonite matrices supported cell survival and growth under conditions of calcium and nutrients deprivation, whereas in 2D such treatments led to death of all neurons and of almost all astrocytes. To show that the aragonite matrices are permissive for neural cells also in vivo, aragonite matrices having no substrate coating grafted into postnatal rat cortex were invaded by neurons growing on the surface and in multilayer structures resembling those seen in the 3D culture in vitro. Hence, culture of neurons and astrocytes on 3D aragonite coralline matrices is a novel mean for production of stable neuronal tissue, with significant implication to the field of neuronal tissue restoration.

Application of inkjet printing to tissue engineering

Recent advances in organ printing technology for applications relating to medical interventions and organ replacement are described. Organ printing refers to the placement of various cell types into a soft scaffold fabricated according to a computer-aided design template using a single device. Computer aided scaffold topology design has recently gained attention as a viable option to achieve function and mass transport requirements within tissue engineering scaffolds. An exciting advance pioneered in our laboratory is that of simultaneous printing of cells and biomaterials, which allows precise placement of cells and proteins within 3-D hydrogel structures. This advance raises the possibility of spatially controlling not only the scaffold structure, but also the type of tissue that can be grown within the scaffold and the thickness of the tissue as capillaries and vessels could be constructed within the scaffolds. Here we summarize recent advances in printing cells and materials using the same device.

Permeable guidance channels containing microfilament scaffolds enhance axon growth and maturation

Successful peripheral nerve regeneration is still limited in artificial conduits, especially for long lesion gaps. In this study, porous poly(L-lactide-co-DL-lactide, 75:25) (PLA) conduits were manufactured with 16 poly(L-lactide) (PLLA) microfilaments aligned inside the lumen. Fourteen and 18 mm lesion gaps were created in a rat sciatic nerve lesion model. To evaluate the combined effect of permeable PLA conduits and microfilament bundles on axon growth, four types of implants were tested for each lesion gap: PLA conduits with 16 filaments; PLA conduits without filaments; silicone conduits with 16 filaments; and silicone conduits without filaments. Ten weeks following implantation, regeneration within the distal nerve was compared between corresponding groups. Antibodies against the markers S100, calcitonin gene related peptide (CGRP), RMDO95, and P0 were used to identify Schwann cells, unmyelinated axons, myelinated axons, and myelin, respectively. Results demonstrated that the filament scaffold enhanced tissue cable formation and Schwann cell migration in all groups. The filament scaffold enhanced axonal regeneration toward the distal stump, especially across long lesion gaps, but significance was only achieved with PLA conduits. When compared to corresponding silicone conduits, permeable PLA conduits enhanced myelinated axon regeneration across both lesion gaps and achieved significance only in combination with filament scaffolds. Myelin staining indicated PLA conduits supported axon myelination with better myelin quantity and quality when compared to silicone conduits.

Engineering microenvironment for expansion of sensitive anchorage-dependent mammalian cells

Tissue engineering involves ex vivo seeding of anchorage-dependent mammalian cells onto scaffolds, or transplanting cells in vivo. The cell expansion currently requires repeated cell detachment from solid substrata by enzymatic, chemical or mechanical means. The report here presents a high yield three-dimensional culture and harvest system circumventing the conventional detachment requirements. Cells mixed with dilute cationic collagen were microencapsulated within an ultra-thin shell of synthetic polymers. The cationic collagen could rapidly form a conformal layer of collagen fibers around cells to support cell proliferation and functions. The collagen could be readily removed from cells with a buffer rinse after harvesting from the fragile microcapsules. The cells harvested from this system demonstrate improved attachment, morphology and functions over conventionally cultured cells, upon binding to ligand-conjugated polymer surfaces. The harvested cells can be re-encapsulated and allowed to proliferate again, or used immediately in applications.

Effect of collagen gel stiffness on neurite extension

Although collagen is commonly used as components of tissue-engineered nerve-guidance channels, little is known about the effect of the mechanical properties of commonly used gel concentrations on the extension of neurites. This study focused on neurite extension of dissociated chick dorsal root ganglia in vitro over a range of collagen concentrations (0.4-2.0 mg/ml). Neurite length increased in all gels between day 1 and day 4, except at the highest collagen concentration, where a 9% decrease was noted at day 4. Although maximum neurite extension was seen in lower concentration gels (0.6-0.8 mg/ml), mechanical stiffness of each gel significantly increased with increasing concentration, from 2.2 Pa at 0.4 mg/ml to 17.0 Pa at 2.0 mg/ml. A previous model of mechanical stiffness versus neurite outgrowth did not fit this data well, likely because of interactions between the growth cone and the collagen fibers. Overall, these results provided insight regarding factors that influence neurite elongation and may be utilized to further optimize tissue-engineered scaffolds.

Pharmacologically active microcarriers: a tool for cell therapy

To overcome certain problems encountered in cell therapy, particularly cell survival, lack of cell differentiation and integration in the host tissue, we developed pharmacologically active microcarriers (PAM). These biodegradable particles made with poly(D,L-lactic-co-glycolic acid) (PLGA) and coated with adhesion molecules may serve as a support for cell culture and may be used as cell carriers presenting a controlled delivery of active protein. They can thus support the survival and differentiation of the transported cells as well as their microenvironment. To develop this tool, nerve growth factor (NGF)-releasing PAM, conveying PC12 cells, were produced and characterized. Indeed, these cells have the ability to differentiate into sympathetic-like neurons after adhering to a substrate, in the presence of NGF, and can then release large amounts of dopamine. Certain parameters such as the size of the microcarriers, the conditions enabling the coating of the microparticles and the subsequent adhesion of cells were thus studied to produce optimized PAM.

Growth of Primary Hippocampal Neuronal Tissue on an Aragonite Crystalline Biomatrix

Tissue-like structures of hippocampal neurons were established in a crystalline three-dimensional (3D) aragonite biomatrix obtained from the exoskeleton of the coral Porites lutea. Cultures were maintained in vitro for up to 5 weeks. Cell viability and regeneration of neuronal properties were studied by immunocytochemical methods, light microscopy image analysis techniques, and scanning electron microscopy. Some portions of the cell population acquired the morphological characteristics of hippocampal pyramidal or granule neurons with axons and dendrites extending in a 3D manner along the surfaces of the crystalline biomatrix. The neurons usually grew on a sheet of glial cells. Within the pore void areas, multiple layers of neurons were formed, many of the neurons growing with no attachment to the crystalline surfaces. The neurons developed mature synaptic connections, with presynaptic sites expressing the synaptic vesicle protein 2 and postsynaptic sites having the shape of dendritic spines and expressing type 1 glutamate receptors, as these cells do under conventional culture conditions. The findings of the present study suggest that neuronal networks growing in a strong 3D aragonite support may find application as tissue replacement material for the central nervous system.

Characterization of cortical neuron outgrowth in two- and three-dimensional culture systems

To improve the ability of regeneration by grafting living cells or by adding growth factor to a lesion site, it is important to find good biomaterials for neuron survival and regeneration. This study focused on two- and three-dimensional cultures in a matrix using biomaterials such as agarose, collagen, fibrin, and their mixtures, because these are considered to be suitable biomaterials for neuron outgrowth. Cortical neurons were dissected from E17 rat embryos and cultured in agarose gel, collagen gel, fibrin glue, and mixtures of collagen and fibrin. Results showed that neurons cultured in collagen gel and fibrin glue had longer periods of survival (more than 3 weeks) and better neurite extension than those observed in agarose gels. As to the survival rate according to the MTT and lactate dehydrogenase assays, fibrin glue was the most suitable biomaterial for neuron survival among the biomaterials examined. With two-dimensional fibrin plating, neuron cells exhibited cell aggregation and stress fibers, but the same results were not observed with collagen gel. There were no differences in neurite extension and survival in the mixtures of collagen and fibrin. The results suggest that collagen and fibrin can provide a suitable substrate for a three-dimensional culture matrix for neuronal survival and differentiation.

Neural stem cell differentiation in a cell-collagen-bioreactor culture system

Neural stem cells and neural progenitors (NSCs/NPs) are capable of self-renewal and can give rise to both neurons and glia. Such cells have been isolated from the embryonic brain and immobilized in three dimensional collagen gels. The collagen-entrapped NSCs/NPs recapitulate CNS stem cell development and form functional synapses and neuronal circuits. However, the cell-collagen constructs from static conditions contain hypoxic, necrotic cores and the cells are short-lived. In the present study, NSCs/NPs isolated from embryonic day 13 rat cortical neuroepithelium are immobilized in type I collagen gels and cultured in NASA-designed rotating wall vessel (RWV) bioreactors for up to 9 weeks. Initially, during the first 2 weeks of culture, a lag phase of cellular growth and differentiation is observed in the RWV bioreactors. Accelerated growth and differentiation, with the cells beginning to form large aggregates (approximately 1 mm in diameter) without death cores, begins during the third week. The collagen-entrapped NSCs/NPs cultured in RWV show active neuronal generation followed by astrocyte production. After 6 weeks in rotary culture, the cell-collagen constructs contain over 10 fold greater nestin+ and GFAP+ cells and two-fold more TuJ1 gene expression than those found in static cultures. In addition, TuJ1+ neurons in RWV culture give rise to extensive neurite outgrowth and considerably more synapsin I+ pre-synaptic puncta surrounding MAP2+ cell bodies and dendrites. These results strongly suggest that the cell-collagen-bioreactor culture system supports long-term NSC/NP growth and differentiation, and RWV bioreactors can be useful in generating neural tissue like constructs, which may have the potential for cell replacement therapy.

Quantal release of ATP from clusters of PC12 cells

Although ATP is important for intercellular communication, little is known about the mechanism of endogenous ATP release due to a dearth of suitable models. Using PC12 cells known to express the P2X2 subtype of ATP receptors and to store ATP with catecholamines inside dense-core vesicles, we found that clusters of PC12 cells cultured for 3-7 days generated small transient inward currents (STICs) after an inward current elicited by exogenous ATP. The amplitude of STICs in individual cells correlated with the peak amplitude of ATP-induced currents. STICs appeared as asynchronous responses (approximately 20 pA average amplitude) for 1-20 s and were investigated with a combination of patch clamping, Ca2+ imaging, biochemistry and electron microscopy. Comparable STICs were produced by focal KCl pulses and were dependent on extracellular Ca2+. STICs were abolished by the P2X antagonist PPADS and potentiated by Zn2+, suggesting they were mediated by P2X2 receptor activation. The highest probability of observing STICs was after the peak of intracellular Ca2+ increase caused by KCl. Biochemical measurements indicated that KCl application induced a significant release of ATP from PC12 cells. Electron microscopy studies showed narrow clefts without 'synaptic-like' densities between clustered cells. Our data suggest that STICs were caused by quantal release of endogenous ATP by depolarized PC12 cells in close juxtaposition to the recorded cell. Thus, STICs may be a new experimental model to characterize the physiology of vesicular release of ATP and to study the kinetics and pharmacology of P2X2 receptor-mediated quantal currents.

Multi-channeled biodegradable polymer/CultiSpher composite nerve guides

Innovative methods to fabricate porous, biodegradable conduits were developed to produce nerve guides with multiple longitudinally aligned channels. The geometry of the nerve guide's channels was designed to be appropriate for harboring neurite extension. Both the coated mandrel and mandrel adhesion techniques permit flexibility in the number of channels, channel organization, and channel diameters. In this study, the composite nerve guides were comprised of poly(caprolactone) (PCL) and porous collagen-based beads (CultiSphers). The incorporation of the collagenous beads results in enhanced cortical neuron adhesion, viability, and neurite extension as compared to PCL alone. Additionally, Schwann cell studies indicated that the PCL/CultiSpher composite is a suitable substrate for cell adhesion. Mechanical properties of the PCL/CultiSpher material and in vitro degradation rates indicate the potential usefulness of this novel composite for use in the fabrication of nerve guides.

Combinatorial code of growth factors and neuropeptides define neuroendocrine differentiation in PC12 cells

Adrenal chromaffin cells constitute one of the first cell types to have been defined as a neuroendocrine cell type. Since they produce dopamine, these cells have been proposed for the treatment of neuronal deficits in human Parkinson's disease. However, the factors involved in the development of chromaffin cells are still poorly understood. Based on recent insights from stem cell research, we decided to study the role of extracellular matrices, growth factors and neuropeptides on the neuroendocrine differentiation in a serum-free medium of PC12 cells. Employing immunohistochemistry, quantitative PCR and HPLC analysis, neuroendocrine differentiation was determined by evaluating neurite outgrowth, catecholamine biosynthesis and release as well as neuropeptide and vesicular protein mRNA expression. The combination of bFGF, NGF and PACAP could prevent the inhibition of neurite process development induced by dexamethasone in PC12 cells cultured on ECM. Whereas glucocorticoids were essential in the regulation of enzymes of catecholamine biosynthesis and metabolism, growth factors and PACAP were more efficient in inducing neuropeptide and chromogranin B expression as well as release of dopamine and 3-methoxytyramine. Therefore, in addition to glucocorticoids, chromaffin cells need a gradient of matrix, growth factors, and neuropeptides to develop the full functional phenotype of a neuroendocrine cell.

Agarose gel stiffness determines rate of DRG neurite extension in 3D cultures

The optimization of scaffold mechanical properties for neurite extension is critical for neural tissue engineering. Agarose hydrogels can be used to stimulate and maintain three-dimensional neurite extension from primary sensory ganglia in vitro. The present study explores the structure-function relationship between dorsal root ganglion (DRG) neurite extension and agarose gel mechanical properties. A range of agarose gels of differing concentrations were generated and the corresponding rate of E9 DRG neurite extension was measured. Rate of neurite extension was inversely correlated to the mechanical stiffness of agarose gels in the range of 0.75-2.00% (wt/vol) gel concentrations. In addition, we postulate a physical model that predicts the rate of neurite extension in agarose gels, if gel stiffness is a known parameter. This model is based on Heidemann and Buxbaum's model of neurite extension. These results, if extended to scaffolds of other morphological and chemical features, would contribute significantly to the design criteria of three-dimensional scaffolds for neural tissue engineering.

Cell imaging and morphology: application to studies of inherited purine metabolic disorders

A number of inherited or drug-induced metabolic disorders involving dysfunctions in purines and pyrimidines are strongly associated with neurological dysfunction, e.g., Lesch Nyhan syndrome. Such disorders have been studied extensively using biochemical and molecular techniques in order to examine how such defects occur, sometimes using in vitro models based upon cultured neuroblastoma cell lines. However, these metabolic dysfunctions may manifest their effects in other ways, such as impaired synaptic transmission and gross abnormalities in neuronal growth and differentiation. This review outlines the latter novel facet of purine research. It is proposed that by employing cell imaging techniques and cultured neuroblastoma cell lines, believed to model the nervous system, significant insights into how inherited disorders of purine metabolism affect neuronal development can be obtained. This review provides an example of the application of these techniques to understand the etiology of Lesch Nyhan syndrome, and encourages further study of the role of purines and pyrimidines in the development of the nervous system.

Aggregation enhances catecholamine secretion in cultured cells

Transplanted cells and tissues have potential uses in the treatment of genetic, geriatric, and metabolic disorders, but optimal conditions for transplantation are not yet known. In this report, PC12 cells were aggregated in rotary and microgravity culture, using serum-free or serum-supplemented medium, and using a multifunctional polymer-peptide aggregation factor. Aggregates and single cells were then encapsulated and cultured within agarose gels, and the dopamine secretion in response to a depolarization buffer was measured using high-performance liquid chromatography combined with electrochemical detection (HPLC-ECD). On a per-cell basis, aggregated cells secreted higher levels of dopamine than did single cells. The size of the aggregates was also a factor in catecholamine secretion; dopamine release from the larger aggregates formed in rotary culture was observed to increase at a faster rate, then achieve a plateau level at an earlier time than did the smaller aggregates. Cells aggregated in microgravity culture exhibited a markedly different behavior, lacking the rapid rise in dopamine secretion characteristic of the rotary-aggregates cells: on a per-cell basis, the dopamine secretion remained at a level corresponding to the plateau level expressed by the rotary-aggregates cells. Dopamine secretion in aggregates may be enhanced by the increase in number of cell-cell contacts, as occurs during high-density culture of PC12 cells. These results provide further evidence that cell-cell contact regulates the behavior of differentiated cells, and therefore is important in tissue engineering.

Peripheral nerve regeneration using silicone rubber chambers filled with collagen, laminin and fibronectin

A 10 mm gap of rat sciatic nerve was created between the proximal and distal nerve stumps, which were sutured into silicone rubber tubes filled with an extracellular gel containing collagen, laminin and fibronectin. Empty silicone rubber tubes were used as controls. Six weeks after implantation, all extracellular elements were completely degraded and absorbed, and 90% of the animals from the extracellular gel group exhibited regeneration across the nerve gaps, whereas only 60% in the control group. Both qualitative and quantitative histology of the regenerated nerves revealed a more mature ultrastructural organization with 28% larger cross-sectional area and 28% higher number of myelinated axons in the extracellular gel group than the controls. These results showed that the gel mixture of collagen, laminin and fibronectin could offer a suitable growth medium for the regeneration of axons.

Influence of synthetic polymers on neutrophil migration in three-dimensional collagen gels

In vitro studies of cell migration within three-dimensional polymeric materials are essential for understanding cell behavior and for developing new biomedical materials. Human neutrophil motility was examined in hydrated collagen gels containing various synthetic polymers. Physical mixtures of collagen and certain water-soluble polymers formed stable gels that were good substrates for cell migration. Addition of either polyethylene glycol (PEG) or the pluronictrade mark copolymer F68 did not change the morphological or mechanical properties of collagen gels, as determined by SEM and oscillatory rheometry; however, addition of either polymer significantly inhibited cell motility in both a modified 96-well chemotaxis chamber assay and a direct visual assay. Although the mechanism for this observed polymer inhibition of neutrophil migration is not yet clear, these results suggest that PEG and F68, two widely used biomedical polymers that are considered to be relatively "inert," may cause significant inhibition of cell motility.

Cultures of cells from fetal rat brain: methods to control composition, morphology, and biochemical activity

Fetal tissue transplantation is a promising new approach for the treatment of neurodegenerative diseases, but the optimal conditions for preparing cells for transplantation have not been defined. The growth of a population of septal brain cells, primarily containing cholinergic neurons and glia, was characterized after seeding at densities from 5 x 10(4) to 6 x 10(5) cells/cm2, on polystyrene-, collagen-, laminin-, and fibronectin-coated surfaces, in the presence of serum and/or serum-free medium. Differentiated glial cells were selected by culture on fibronectin or laminin surfaces, in the presence of low amounts of serum (2.5% FBS) and G5, a soluble factor containing EGF and insulin. Differentiated neuronal cells were selected by culture on laminin, in the presence of low amounts of serum (2.5% FBS) and N2, a soluble factor containing supplemental hormones. In each case, a minimum seeding density of 1 x 10(5) cells/cm2 was required. Neuronal growth could be maintained long term (21 days) with high levels of neuronal activity (ChAT activity).

Collagen--biomaterial for drug delivery

The use of collagen as a biomaterial is currently undergoing a renaissance in the tissue engineering field. The biotechnological applications focus on the aspects of cellular growth or delivery of proteins capable of stimulating cellular response. However, basic knowledge about collagen biochemistry and the processing technology in combination with understanding of the physico-chemical properties is necessary for an adequate application of collagen for carrier systems. The purpose of this review article is to summarize information available on collagen dosage forms for drug delivery as well as to impart an overview of the chemical structures and the galenical properties including detailed description of the processing steps - extraction, purification, chemical crosslinking and sterilization. The most successful and stimulating applications are shields in ophthalmology, injectable dispersions for local tumor treatment, sponges carrying antibiotics and minipellets loaded with protein drugs. However, the scientific information about manipulating release properties or mechanistic studies is not as abundant as for some synthetic polymers.

Influence of collagen and laminin gels concentration on nerve regeneration after resection and tube repair

In order to assess the usefulness of collagen and laminin gels prefilling nerve chambers to enhance nerve regeneration, we compared reinnervation of target organs after sciatic nerve resection leaving gaps of 4 or 6 mm followed by repair with silicone tubes in different groups of mice. Tubes were prefilled with saline solution, collagen gels, or laminin-containing gels at different concentrations. Functional reinnervation was assessed by noninvasive methods to quantitate recovery of sweating, nociceptive, sensory, and motor functions in the hindpaw repeatedly during 4-5 months postoperation. The increase in gap length between nerve stumps delayed the beginning and reduced the degree of functional recovery achieved. Reinnervation started earlier and achieved slightly higher levels with collagen gel diluted at 1.28 mg/ml than with more concentrated (1.92 and 2.56 mg/ml) collagen gels and with saline-prefilled tubes bridging a 4-mm gap. Recovery was also better with diluted (4 mg/ml) than with concentrated (12 mg/ml) laminin-containing gel, although lower than with collagen gels and saline. By prefilling silicone tubes bridging a 6-mm gap, a length considered limiting for regeneration in the mouse sciatic nerve, with diluted collagen or laminin gels, both matrices allowed for higher levels of recovery and for successful regeneration in a higher proportion of mice than saline solution. The laminin gel performed slightly better than the collagen gel.

Neutrophil motility in extracellular matrix gels: mesh size and adhesion affect speed of migration

Polymorphonuclear leukocyte (PMN) migration through tissue extracellular space is an essential step in the inflammatory response, but little is known about the factors influencing PMN migration through gels of extracellular matrix (ECM). In this study, PMN migration within reconstituted gels containing collagen type I or collagen type I supplemented with laminin, fibronectin, or heparin was measured by quantitative direct visualization, resulting in a random motility coefficient (mum a quantitative index for rate of cell dispersion) for the migrating cell population. The random motility coefficient in unsupplemented collagen (0.4 mg/ml) gels was approximately 9 x 10(-9) cm2/s. Supplementing gels with heparin or fibronectin produced a significant decrease in mu, even at the lowest concentrations studied (1 microgram/ml fibronectin or 0.4 microgram/ml heparin). At least 100 micrograms/ml of laminin, or 20% of the total gel protein, was required to produce a similar decrease in mu. Scanning electron microscopy revealed two different gel morphologies: laminin or fibronectin appeared to coat the 150-nm collagen fibers whereas heparin appeared to induce fiber bundle formation and, therefore, larger interstitial spaces. The decrease in mu observed in heparin-supplemented gels correlated with the increased mesh size of the fiber network, but the difference observed in mu for fibronectin- and laminin-supplemented gels did not correlate with either mesh size or the mechanical properties of the gel, as determined by rheological measurements. However, PMNs adhered to fibronectin-coated surfaces in greater numbers than to collagen- or laminin-coated surfaces, suggesting that changes in cell adhesion to protein fibers can also produce significant changes in cell motility within an ECM gel.