Structures of niobium pentoxide and their implications on chemical behavior

Exploring the Effects of the Photochromic Response and Crystallization on the Local Structure of Noncrystalline Niobium Oxide

Niobium oxide (Nb2O5) is a versatile semiconductor material with photochromic properties. This study investigates the local structure of noncrystalline, short-range-ordered niobium oxide synthesized via a sol-gel method. X-ray atomic pair distribution function analysis unravels the structural arrangements within the noncrystalline materials at a local scale. In the following, in situ scattering and diffraction experiments elucidate the heat-induced structure transformation of the amorphous material into crystalline TT-Nb2O5 at 550 °C. In addition, the effect of photocatalytic conditions on the structure of the material was investigated by exposing the short-range-ordered and crystalline materials to ultraviolet light, resulting in a reversible color change from white to dark brown or blue. This photochromic response is due to the reversible elongation of the nearest Nb-O neighbors, as shown by local structure analysis based on in situ PDF analyses. Optical band gap calculations based on the ultraviolet-visible spectra collected for both the short-range-ordered and crystalline materials show that the band gap values reduced for the darkened materials return to their initial state after bleaching. Furthermore, electron energy loss spectroscopy reveals the reduction of Nb5+ to Nb4+ centers as a persistent effect. The study establishes a correlation between the band gap and the structure of niobium oxide, providing insights into the structure-performance relation at the atomic level.

Polymorphs of Nb2O5 Compound and Their Electrical Energy Storage Applications

Niobium pentoxide (Nb2O5), as an important dielectric and semiconductor material, has numerous crystal polymorphs, higher chemical stability than water and oxygen, and a higher melt point than most metal oxides. Nb2O5 materials have been extensively studied in electrochemistry, lithium batteries, catalysts, ionic liquid gating, and microelectronics. Nb2O5 polymorphs provide a model system for studying structure-property relationships. For example, the T-Nb2O5 polymorph has two-dimensional layers with very low steric hindrance, allowing for rapid Li-ion migration. With the ever-increasing energy crisis, the excellent electrical properties of Nb2O5 polymorphs have made them a research hotspot for potential applications in lithium-ion batteries (LIBs) and supercapacitors (SCs). The basic properties, crystal structures, synthesis methods, and applications of Nb2O5 polymorphs are reviewed in this article. Future research directions related to this material are also briefly discussed.

Cyto-genotoxicity of crystalline and amorphous niobium (V) oxide nanoparticles in CHO-K1 cells

Niobium (V) oxide nanoparticles (NINPs) have been widely and increasingly applied in various health products and industrial processes. This merits further study of their toxicity. Here, we investigated the potential of NINPs to induce DNA damage, cytotoxicity, and chromosome instability in cultured CHO-K1 cells. NINPs were physico-chemically characterized. As assessed by comet assay, crystalline and amorphous NINPs were genotoxic at the highest concentrations evaluated. The cytokinesis-block micronucleus assay demonstrated that a 24-h treatment with NINPs, for the crystalline and the amorphous samples, significantly reduced the nuclear division cytotoxicity index. In addition, a 4-h treatment period of crystalline NINPs increased micronucleus (MNi) frequencies. MNi, nucleoplasmic bridges and nuclear buds were detected after exposure of the cells for 24 h to crystalline NINPs. In the amorphous sample, chromosome instability was restricted to the induction of MNi, in the 24-h treatment, detected at all tested concentrations. The fluorescence and dark field microscopy demonstrated the uptake of NINPs by CHO-K1 cells and an intracellular distribution outlining the nucleus. Our data advance understanding of the cytotoxic and genotoxic effects of NINPs and should be taken into consideration when setting up guidelines for their use in industrial or health products.

Fast Pyrolysis Oil Upgrading via HDO with Fe-Promoted Nb2O5-Supported Pd-Based Catalysts

Due to the high acid, oxygen and water contents of fast pyrolysis oil, it requires the improvement of its fuel properties by further upgrading, such as catalytic hydrodeoxygenation (HDO). In this study, Nb2O5 was evaluated as a support of Pd-based catalysts for HDO of fast pyrolysis oil. A Pd/SiO2 catalyst was used as a reference. Additionally, the impact of iron as a promoter in two different loadings was investigated. The activity of the synthesized catalysts was evaluated in terms of H2 uptake and composition of the upgraded products (gas phase, upgraded oil and aqueous phase) through elemental analysis, Karl Fischer titration, GC-MS/FID and 1H-NMR. In comparison to SiO2, due to its acid sites, Nb2O5 enhanced the catalyst activity towards hydrogenolysis and hydrogenation, confirmed by the increased water formation during HDO and a higher content of hydrogen and aliphatic protons in the upgraded oil. Consequently, the upgraded oil with Nb2O5 had a lower average molecular weight and was therefore less viscous than the oil obtained with SiO2. When applied as a promoter, Fe enhanced hydrogenation and hydrogenolysis, although it slightly decreased the acidity of the support, owing to its oxophilic nature, leading to the highest deoxygenation degree (42.5 wt.%) and the highest product HHV (28.2 MJ/kg).

Thermochemical and Catalytic Conversion Technologies for the Development of Brazilian Biomass Utilization

The social, economic, and environmental impacts of climate change have been shown to affect poorer populations throughout the world disproportionally, and the COVID-19 pandemic of 2020–2021 has only exacerbated the use of less sustainable energy, fuel, and chemical sources. The period of economic and social recovery following the pandemic presents an unprecedented opportunity to invest in biorefineries based on the pyrolysis of agricultural residues. These produce a plethora of sustainable resources while also contributing to the economic valorization of first-sector local economies. However, biomass-derived pyrolysis liquid is highly oxygenated, which hinders its long-term stability and usability. Catalytic hydrogenation is a proposed upgrading method to reduce this hindrance, while recent studies on the use of nickel and niobium as low-cost catalysts, both abundant in Brazil, reinforce the potential synergy between different economic sectors within the country. This review gathers state-of-the-art applications of these technologies with the intent to guide the scientific community and lawmakers alike on yet another alternative for energy and commodities production within an environmentally sustainable paradigm.

Polyoxoniobates as molecular building blocks in thin films

Niobium oxide thin films have been prepared by spin-coating aqueous solutions of tetramethylammonium salts of the isostructural polyoxometalate clusters [Nb₁₀O₂₈]^6-, [TiNb₉O₂₈]^7- and [Ti₂Nb₈O₂₈]^8- onto silicon wafers, and annealing them. The [Nb₁₀O₂₈]^6- cluster yields films of Nb₂O₅ in the orthorhombic and monoclinic crystal phases when annealed at 800 °C and 1000 °C, respectively, whereas the [TiNb₉O₂₈]^7- and [Ti₂Nb₈O₂₈]^8- clusters yield the monoclinic crystal phases of Ti₂Nb₁₂O₂₉ and TiNb₂O₇ (titanium-niobium oxides) in different ratios. We also demonstrate a protocol for depositing successive layers of metal oxide films. Finally, we explore factors affecting the roughness of the films.

Niobium pentoxide based materials for high rate rechargeable electrochemical energy storage

The demand for high rate energy storage systems is continuously increasing driven by portable electronics, hybrid/electric vehicles and the need for balancing the smart grid. Accordingly, Nb₂O₅ based materials have gained great attention because of their fast cation intercalation faradaic charge storage that endows them with high rate energy storage performance. In this review, we describe the crystalline features of the five main phases of Nb₂O₅ and analyze their specific electrochemical characteristics with an emphasis on the intrinsic ion intercalation pseudocapacitive behavior of T-Nb₂O₅. The charge storage mechanisms, electrochemical performance and state-of-the-art characterization techniques for Nb₂O₅ anodes are summarized. Next, we review recent progress in developing various types of Nb₂O₅ based fast charging electrode materials, including Nb₂O₅ based mixed metal oxides and composites. Finally, we highlight the major challenges for Nb₂O₅ based materials in the realm of high rate rechargeable energy storage and provide perspectives for future research.

Hydrolysis of amides to carboxylic acids catalyzed by Nb2O5

An efficient heterogeneous Nb₂O₅ catalytic system has been developed for industrially important and challenging amide hydrolysis reaction to carboxylic acid through cleavage of resonance stabilized amidic C–N bond.

Preparation and Characterization of NbxOy Thin Films: A Review

Niobium oxides (NbO, NbO2, Nb2O5), being a versatile material has achieved tremendous popularity to be used in a number of applications because of its outstanding electrical, mechanical, chemical, and magnetic properties. NbxOy films possess a direct band gap within the ranges of 3.2–4.0 eV, with these films having utility in different applications which include; optical systems, stainless steel, ceramics, solar cells, electrochromic devices, capacitor dielectrics, catalysts, sensors, and architectural requirements. With the purpose of fulfilling the requirements of a vast variety of the named applications, thin films having comprehensive properties span described by film composition, morphology, structural properties, and thickness are needed. The theory, alongside the research status of the different fabrication techniques of NbxOy thin films are reported in this work. The impact of fabrication procedures on the thin film characteristics which include; film thickness, surface quality, optical properties, interface properties, film growth, and crystal phase is explored with emphases on the distinct deposition process applied, are also described and discussed.

Enhanced NiO Dispersion on a High Surface Area Pillared Heterostructure Covered by Niobium Leads to Optimal Behaviour in the Oxidative Dehydrogenation of Ethane

A Nb-containing siliceous porous clay heterostructure (PCH) with Nb contents from 0 to 30 wt %) was prepared from a bentonite and used as support in the preparation of supported NiO catalysts with NiO loading from 15 to 80 wt %. Supports and NiO-containing catalysts were characterised by several physicochemical techniques and tested in the oxidative dehydrogenation (ODH) of ethane. The characterisation studies on Nb-containing supports showed the presence of well-anchored Nb⁵⁺ species without the formation of Nb₂ O₅ crystals. High dispersion of nickel oxide with low crystallinity was observed for the Nb-containing PCH supports. In addition, when NiO is supported on these Nb-containing porous clays, it is more effective in the ODH of ethane (ethylene selectivity of ca. 90 %) than NiO supported on the corresponding Nb-free siliceous PCH or on Nb₂ O₅ (ethylene selectivities of ca. 30 and 60 %, respectively). Factors such as the NiO-Nb⁵⁺ interaction, the NiO particle size and the properties of surface Niⁿ⁺ species were shown to determine the catalytic performance.

Porous niobia spheres with large surface area: alcothermal synthesis and controlling of their composition and phase transition behaviour

Submicron-sized niobia (Nb2O5) porous spheres with a high specific surface area (300 m2 g-1) and nano concave-convex surfaces were synthesized via a rapid one-pot single-step alcothermal reaction. Prolonged reaction time or high reaction temperatures resulted in a morphology change of Nb2O5 from amorphous sphere to rod crystals with hexagonal crystal phase. A similar alcothermal reaction yielded TiO2-Nb2O5 composite porous spheres, whose Ti : Nb molar ratio was controlled by changing the precursor solution component ratios. A simple thermal treatment of amorphous TiO2-Nb2O5 porous spheres consisting of 1 : 2 (molar ratio) Ti : Nb at 600 °C for 2 h induced crystal phase transfer from amorphous to a monoclinic crystal phase of submicron-sized TiNb2O7 porous spheres with a specific surface area of 50 m2 g-1.

Niobium pentoxide nanomaterials with distorted structures as efficient acid catalysts

Niobium pentoxides are promising acid catalysts for the conversion of biomass into fuels and chemicals. Developing new synthesis routes is essential for designing niobium pentoxide catalysts with improved activity for specific practical processes. Here we show a synthesis approach in acetophenone, which produces nanostructured niobium pentoxides with varying structure and acidity that act as efficient acid catalysts. The oxides have orthorhombic structures with different extents of distortions and coordinatively unsaturated metal atoms. A strong dependence is observed between the type and strength of the acid sites and specific structural motifs. Ultrasmall niobium pentoxide nanoparticles, which have strong Brønsted acidity, as well as Lewis acidity, give product yields of 96% (3 h, 140 °C, 100% conversion), 85% (3 h, 140 °C, 86% conversion), and 100% (3 h, 110 °C, 100% conversion) in the reactions of furfuryl alcohol, 5-(hydroxymethyl)furfural, and α-angelica lactone with ethanol, respectively.

Design of Nickel Supported on Water-Tolerant Nb2O5 Catalysts for the Hydrotreating of Lignin Streams Obtained from Lignin-First Biorefining

In biomass conversion, Nb2O5 has attracted increasing attention as a catalyst support presenting water-tolerant Lewis acid sites. Herein, we address the design of Ni/Nb2O5 catalysts for hydrotreating of lignin to hydrocarbons. To optimize the balance between acidic and hydrogenating properties, the catalysts were first evaluated in the hydrotreating of diphenyl ether. The best catalyst candidate was further explored in the conversion of lignin oil obtained by catalytic upstream biorefining of poplar. As primary products, cycloalkanes were obtained, demonstrating the potential of Ni/Nb2O5 catalysts for the lignin-to-fuels route. However, the Lewis acidity of Nb2O5 also catalyzes coke formation via lignin species condensation. Thereby, an acidity threshold should be found so that dehydration reactions essential to the hydrotreatment are not affected, but the condensation of lignin species prevented. This article provides a critical "beginning-to-end" analysis of aspects crucial to the catalyst design to produce lignin biofuels.

Structural, Electronic, and Thermodynamic Properties of the T and B Phases of Niobia: First-Principle Calculations

Different polymorphs of Nb₂O₅ can be obtained depending on the pressure and temperature of calcination leading to different catalytic properties. Two polymorphs of niobia, T-Nb₂O₅ and B-Nb₂O₅, have been investigated by means of density functional/plane waves method. The equation of state predicted that B-Nb₂O₅ phase is more stable than the T-Nb₂O₅ at low temperature; however at high pressure both phases are stable. These results are in good agreement with the available experimental data. The calculated cohesive energies of 6.63 and 6.59 eV·atom^-1 for the B-Nb₂O₅ and T-Nb₂O₅, respectively, also corroborate this conclusion, and it can be compared to the experimental value of 9.56 eV atom^-1 estimated for the most thermodynamically stable phase. The topological analyses based on quantum theory of atoms in molecules (QTAIM) and electron localization function (ELF) were applied and reveal bonds with large ionic character for both phases. The B-Nb₂O₅ presented larger stiffness than T-Nb₂O₅, and the oxygen sites in the T-Nb₂O₅ are more compressible. The density of states comparison for both structures indicates that B-Nb₂O₅ has lower concentration of acid sites compared to T-Nb₂O₅. This result is consistent with the experimental observations that the concentration of Lewis acid sites decreases with the temperature.

High-Rate Intercalation without Nanostructuring in Metastable Nb2O5 Bronze Phases

Nanostructuring and nanosizing have been widely employed to increase the rate capability in a variety of energy storage materials. While nanoprocessing is required for many materials, we show here that both the capacity and rate performance of low-temperature bronze-phase TT- and T-polymorphs of Nb2O5 are inherent properties of the bulk crystal structure. Their unique "room-and-pillar" NbO6/NbO7 framework structure provides a stable host for lithium intercalation; bond valence sum mapping exposes the degenerate diffusion pathways in the sites (rooms) surrounding the oxygen pillars of this complex structure. Electrochemical analysis of thick films of micrometer-sized, insulating niobia particles indicates that the capacity of the T-phase, measured over a fixed potential window, is limited only by the Ohmic drop up to at least 60C (12.1 A·g(-1)), while the higher temperature (Wadsley-Roth, crystallographic shear structure) H-phase shows high intercalation capacity (>200 mA·h·g(-1)) but only at moderate rates. High-resolution (6/7)Li solid-state nuclear magnetic resonance (NMR) spectroscopy of T-Nb2O5 revealed two distinct spin reservoirs, a small initial rigid population and a majority-component mobile distribution of lithium. Variable-temperature NMR showed lithium dynamics for the majority lithium characterized by very low activation energies of 58(2)-98(1) meV. The fast rate, high density, good gravimetric capacity, excellent capacity retention, and safety features of bulk, insulating Nb2O5 synthesized in a single step at relatively low temperatures suggest that this material not only is structurally and electronically exceptional but merits consideration for a range of further applications. In addition, the realization of high rate performance without nanostructuring in a complex insulating oxide expands the field for battery material exploration beyond conventional strategies and structural motifs.

Elucidating the promotional effects of niobia on SnO2 for CO oxidation: developing an XRD extrapolation method to measure the lattice capacity of solid solutions

Using an XRD extrapolation method, the SnO₂ lattice capacity for Nb₂O₅ is quantified. A Sn–Nb solid solution without excess Nb₂O₅ is promising for CO oxidation.

Facile Synthesis of Nb2O5@Carbon Core-Shell Nanocrystals with Controlled Crystalline Structure for High-Power Anodes in Hybrid Supercapacitors

Hybrid supercapacitors (battery-supercapacitor hybrid devices, HSCs) deliver high energy within seconds (excellent rate capability) with stable cyclability. One of the key limitations in developing high-performance HSCs is imbalance in power capability between the sluggish Faradaic lithium-intercalation anode and rapid non-Faradaic capacitive cathode. To solve this problem, we synthesize Nb2O5@carbon core-shell nanocyrstals (Nb2O5@C NCs) as high-power anode materials with controlled crystalline phases (orthorhombic (T) and pseudohexagonal (TT)) via a facile one-pot synthesis method based on a water-in-oil microemulsion system. The synthesis of ideal T-Nb2O5 for fast Li(+) diffusion is simply achieved by controlling the microemulsion parameter (e.g., pH control). The T-Nb2O5@C NCs shows a reversible specific capacity of ∼180 mA h g(-1) at 0.05 A g(-1) (1.1-3.0 V vs Li/Li(+)) with rapid rate capability compared to that of TT-Nb2O5@C and carbon shell-free Nb2O5 NCs, mainly due to synergistic effects of (i) the structural merit of T-Nb2O5 and (ii) the conductive carbon shell for high electron mobility. The highest energy (∼63 W h kg(-1)) and power (16 528 W kg(-1) achieved at ∼5 W h kg(-1)) densities within the voltage range of 1.0-3.5 V of the HSC using T-Nb2O5@C anode and MSP-20 cathode are remarkable.