Food application of high electric field pulses

Comparison of microwave and pulsed electric field methods on extracting antioxidant compounds from Arvaneh plant (Hymenocrater platystegius Rech. F)

Improving the quality of extracts derived from medicinal plants is a critical concern due to their extensive use across various industries. The Arvaneh plant (Hymenocrater platystegius Rech. F), a species native to the Khorasan province in Iran and belonging to the mint family, was the focus of this study. We optimized the extraction of Arvaneh plant using both microwave (MW) and pulsed electric field (PEF) techniques. The MW method was tested at different processing times (90, 180, and 270 s) and power levels (180, 540, and 900 W), while the PEF method was evaluated with varying electric field intensities (0.25, 3.25, and 6.25 kV/cm) and pulse numbers (10, 45, and 80) using a central composite design (CCD). The results revealed that extraction efficiency, total phenolic content, and total flavonoid content were significantly higher with the PEF method compared to the MW method (p < 0.05). Moreover, the PEF technique showed superior performance in preserving the antioxidant properties of the extract, as assessed by DPPH and FRAP methods. GC/MS analysis confirmed the presence of 27 bioactive compounds in the Arvaneh extract obtained through PEF-assisted extraction. In conclusion, the PEF method proved to be highly efficient for extracting bioactive compounds from the Arvaneh plant.

Expanding our food supply: underutilized resources and resilient processing technologies

Many underutilized food resources have been traditionally used by regional and poor communities. The history of their consumption makes them potential new food sources for incorporation into the wider food supply. The ability to tap the potential of undervalued and underutilized food sources will reduce the world's reliance on a limited number of food sources and improve food security and sustainability. The expansion of the food diversity of the food supply to include underutilized food resources will require overcoming challenges in the efficient and profitable production of the raw material, application of suitable postharvest handling procedures to maintain the quality of perishable produce, and the use of appropriate traditional and emerging food processing technologies for conversion of the raw material into safe, nutritious and consumer-acceptable foods. Improvement of food processing technologies, particularly resource-efficient resilient food processes, are required to ensure the safety, quality and functionality of the whole food or extracts, and to develop ingredient formulations containing new foods for manufacture of consumer food products. Factors that help facilitate the social acceptance of new underutilized foods include increasing consumer knowledge and understanding of the contribution of new underutilized food resources to diet diversity for good nutrition, confidence in the safety and value of new foods, and their low environmental impact and importance for future sustainable food. The introduction of new underutilized food resources will increasingly require collaboration along the whole food value chain, including support from government and industry. © 2024 The Author(s). Journal of the Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

A Pulsed Electric Field Accelerates the Mass Transfer during the Convective Drying of Carrots: Drying and Rehydration Kinetics, Texture, and Carotenoid Content

The pulsed electric field (PEF) is a non-thermal food processing technology that induces electroporation of the cell membrane thus improving mass transfer through the cell membrane. In this study, the drying and rehydration kinetics, microstructure, and carotenoid content of carrot (Daucus carota) pretreated by PEF during convective drying at 50 °C were investigated. The PEF treatment was conducted with different field strengths (1.0-2.5 kV/cm) using a fixed pulse width of 20 µs and at a pulse frequency of 50 Hz. The PEF 2.5 kV/cm showed the shortest drying time, taking 180 min, whereas the control required 330 min for the same moisture ratio, indicating a 45% reduction in drying time. The rehydration ability also increased as the strengths of PEF increased. PEF 2.5 kV/cm resulted in 27.58% increase in moisture content compared to the control after rehydration (1 h). Three mathematical models were applied to the drying and rehydration data; the Page and Peleg models were selected as the most appropriate models to describe the drying and rehydration kinetics, respectively. The cutting force of the sample was decreased as the strength of PEF increased, and a more homogeneous cellular structure was observed in the PEF pretreatment group. The reduction in drying time by PEF was beneficial to the carotenoid content, and PEF 2.5 kV/cm showed the highest preservation content of carotenoid. Overall, these results suggested that the pretreatment of PEF and the drying and rehydration rate influence the quality of products, functional components, and cellular structure.

Pulsed Electric Field: Fundamentals and Effects on the Structural and Techno-Functional Properties of Dairy and Plant Proteins

Dairy and plant-based proteins are widely utilized in various food applications. Several techniques have been employed to improve the techno-functional properties of these proteins. Among them, pulsed electric field (PEF) technology has recently attracted considerable attention as a green technology to enhance the functional properties of food proteins. In this review, we briefly explain the fundamentals of PEF devices, their components, and pulse generation and discuss the impacts of PEF treatment on the structure of dairy and plant proteins. In addition, we cover the PEF-induced changes in the techno-functional properties of proteins (including solubility, gelling, emulsifying, and foaming properties). In this work, we also discuss the main challenges and the possible future trends of PEF applications in the food proteins industry. PEF treatments at high strengths could change the structure of proteins. The PEF treatment conditions markedly affect the treatment results with respect to proteins' structure and techno-functional properties. Moreover, increasing the electric field strength could enhance the emulsifying properties of proteins and protein-polysaccharide complexes. However, more research and academia-industry collaboration are recommended to build highly effective PEF devices with controlled processing conditions.

Effect of Pulsed Electric Field (PEF) on Bacterial Viability and Whey Protein in the Processing of Raw Milk

There is growing concern regarding the nutritional value of processed food products. Although thermal pasteurization, used in food processing, is a safe method and is widely applied in the food industry, food products lack quality and nutritional value because of the high temperatures used during pasteurization. In this study, the effect of pulsed electric field (PEF) processing on whey protein content and bacterial viability in raw milk was evaluated by changing the PEF strength and number of pulses. For comparison, traditional pasteurization techniques, such as low-temperature long-time (LTLT), ultra-high temperature (UHT), and microfiltration (MF), were also tested for total whey protein content, bacterial activity, and coliforms. We found that, after treatment with PEF, a significant decrease in total bacterial viability of 2.43 log and coliforms of 0.9 log was achieved, although undenatured whey protein content was not affected at 4.98 mg/mL. While traditional pasteurization techniques showed total bacterial inactivation, they were detrimental for whey protein content: β-lactoglobulin was not detected using HPLC in samples treated with UHT. LTLT treatment led to a significant decrease of 75% in β-lactoglobulin concentration; β-lactoglobulin content in milk samples treated with MF was the lowest compared to LTLT and UHT pasteurization, and ~10% and 27% reduction was observed.

Optimized pulsed electric field-assisted extraction of biosurfactants from Chubak (Acanthophyllum squarrosum) root and application in ice cream

BACKGROUND

In this study, a face-centered central composite design was applied to optimize pulsed electric field parameters (voltage: 1, 4, 7 kV cm^-1 ; pulse number: 10, 65, 120) for the extraction of natural saponins from Chubak root. Data analysis showed that increasing the voltage from 1 to 4 kV cm^-1 and pulse number from 10 to 65 increased foaming ability (FA) and emulsion stability, and decreased foam density (FD), foam stability (FS) and lightness, due to the improved extraction of saponins.

RESULTS

Whereas, an opposite trend was observed for FA, FD and FS on increasing the voltage from 4 to 7 kV cm^-1 as a result of more impurities being extracted. Furthermore, the Chubak root extract (CRE) (0, 1.5, 3.0 and 4.5 g kg^-1 ) obtained under the optimized conditions (voltage of 6.4 kV cm^-1 and pulse number of 80) was used in ice cream formulation because of its ability to reduce surface tension. Based on the results, the samples containing higher amounts of CRE showed higher viscosity, consistency coefficient, overrun, melting resistance and creaminess, as well as lower values of flow behavior index, hardness, adhesiveness, coarseness and coldness. This could be related to the increased water retention, improved whipping ability, greater fat destabilization and smaller ice crystals. Although more bitterness was perceived as a result of an increase in the level of CRE, it had no negative effect on the overall acceptance assessed by trained sensory panelists.

CONCLUSIONS

The results of this study briefly support the conclusion that CRE has a very high potential for use as a foaming, emulsifying and stabilizing agent to improve the quality of ice cream. © 2020 Society of Chemical Industry.

Effects of Pulsed Electric Field and Thermal Treatments on Microbial Reduction, Volatile Composition, and Sensory Properties of Orange Juice, and Their Characterization by a Principal Component Analysis

The effects of pulsed electric field (PEF) treatments on microbial reduction, volatile composition, and sensory characteristics of orange juice were investigated. Mild (Thermal-1) and intensive (Thermal-2) thermal treatments were applied for comparison. A pilot-scale PEF system, with a flow rate of 30 L/h and maximum field strength of 20 kV/cm, was used. PEF treatment at a specific energy of 150 kJ/L resulted in 9.0 and 8.0 decimal reductions of Escherichia coli and Saccharomyces cerevisiae, respectively. The PEF treatments preserved the characteristic compounds associated with a fresh flavor (e.g., dl-limonene, β-myrcene, α-pinene, and valencene) more effectively than an intensive thermal treatment. This was verified by descriptive analysis of sensory evaluations. Based on the principal component analyses (PCAs) and partial least-squares (PLS) regression analyses, PEF-treated orange juice showed higher similarity to untreated orange juice. Our results indicate that PEF may be an alternative processing technique that can preserve the fresh flavor and taste of freshly squeezed orange juice.

Mechanisms of enhanced bacterial endospore inactivation during sterilization by ohmic heating

During ohmic heating, the electric field may additionally inactivate bacterial endospores. However, the exact mechanism of action is unclear. Thus, a mechanistic study was carried out, investigating the possible target of electric fields inside the spore. Bacillus subtilis spores were heated by conventional and ohmic heating in a capillary system under almost identical thermal conditions. Wild-type (PS533) spores were used, as well as isogenic mutants lacking certain components known for their contribution to spores' heat resistance: small-acid soluble proteins (SASP) protecting DNA (PS578); the coat covering the spore (PS3328); and the spore germination enzyme SleB (FB122(+)). Treatment-dependent release of the spore core's depot of dipicolinic acid (DPA) was further evaluated. Up to 2.4 log₁₀ additional inactivation of PS533 could be achieved by ohmic heating, compared to conventional heating. The difference varied for the mutants, with a decreasing difference indicating a decreased effect of the electric field and vice versa. In particular, mutant spores lacking SASPs showed a behavior more similar to thermal inactivation alone. The combination of heat and electric field was shown to be necessary for enhanced spore inactivation. Thus, it is hypothesized that either the heat treatment makes the spore susceptible to the electric field, or vice versa.

Non-electrolytic microelectroporation

Micro and nano technologies are of increasing importance in microfluidics devices used for electroporation (electroporation - the permeabilization of the cell membrane with brief high electric field pulses). Electrochemical reactions of electrolysis occur whenever an electric current flows between an electrode and an ionic solution. It can have substantial detrimental effects, both on the cells and solutions during the electroporation. As electrolysis is a surface phenomenon, between electrodes and solution, the extent of electrolysis is increased in micro and nano electroporation over macro-electroporation, because the surface area of the electrodes in micro and nano electroporation is much larger. A possible way to eliminate the electrolytic effect is to develop non-electrolytic microelectroporation by coating the microelectroporation devices with a dielectric insulating layer. In this study, we examine the effect of a dielectric insulating layer on the performance of a singularity microelectroporation device that we have recently designed. Using numerical analysis, we study the effects of various design parameters including, input sinusoidal voltage amplitude and frequency, geometrical configuration and material electrical properties on the electroporation performance of the non-electrolytic microelectroporation device. In the simulation, we used properties of four real dielectric materials and four solutions of interest for microelectroporation. We characterized the effect of various design parameters of relevance to singularity based microelectroporation, on non-electrolytic microelectroporation. Interestingly, we found that the system behaves in some aspects as a filter and in many circumstances saturation of performance is reached. After saturation is reached, changes in parameters will not affect the performance of the device.

Recent advances in cured raw ham manufacture

Cured raw hams are a valuable and popular group of meat products. The consumption and international trade have increased during the last years, therefore new technologies to accelerate the production process and to increase product quality and safety are needed. In the current review, an overview of European protected cured raw hams is presented. Furthermore, traditional methods for cured raw ham production together with recent advantages in the techniques for pretreatment (trimming, blade tenderization, and freeze-thawing), curing/salting (tumbling, vacuum impregnation, pulsed pressure, ultrasound, pulsed electric fields, simultaneous thawing/salting), drying/ripening (Quick-Dry-Slice-process, oil drop application, high temperature short time process) and postprocessing (vacuum and modified atmosphere packaging, high hydrostatic pressure, high pressure carbon dioxide, high pressure carbon dioxide with ultrasound) are described. Moreover, application techniques and effects of protective cultures and starter cultures, such as molds, yeasts, coagulase-negative staphylococci and lactic acid bacteria, on cured raw ham quality and safety are reviewed.

Inactivation, lysis and degradation by-products of Saccharomyces cerevisiae by electrooxidation using DSA

The yeast Saccharomyces cerevisiae, a microorganism with cell walls resistant to many types of treatments, was chosen as a model to study electrochemical disinfection process using dimensionally stable anodes (DSA). DSA electrodes with nominal composition of Ti/RuO₂TiO₂ and Ti/RuO₂TiO₂IrO₂ were evaluated in 0.05 mol L^-1 Na₂SO₄ containing yeast. The results showed inactivation about of 100 % of the microorganisms at Ti/RuO₂TiO₂ by applying 20 and 60 mA cm^-2 after 120 min of electrolysis, while a complete inactivation at Ti/RuO₂IrO₂TiO₂ electrode was achieved after 180 min at 60 mA cm^-2. When chloride ions were added in the electrolyte solution, 100 % of the yeast was inactivated at 20 mA cm^-2 after 120 min of electrolysis, independent of the anode used. In the absence of chloride, the energy consumption (EC) was of 34.80 kWh m^-3, at 20 mA cm^-2 by using Ti/RuO₂TiO₂ anode. Meanwhile, in the presence of chloride, EC was reduced, requiring 30.24 and 30.99 kWh m^-3 at 20 mA cm^-2, for Ti/RuO₂TiO₂ and Ti/RuO₂IrO₂TiO₂ electrodes, respectively, The best performance for cell lysis was obtained in the presence of chloride with EC of 88.80 kWh m^-3 (Ti/RuO₂TiO₂) and 91.85 kWh m^-3 (Ti/RuO₂IrO₂TiO₂) to remove, respectively, 92 and 95 % of density yeast. The results clearly showed that yeast, as a model adopted, was efficiently inactivated and lysed by electrolysis disinfection using DSA-type electrodes.

Ultrastructural changes in Staphylococcus aureus treated with pulsed electric fields / Cambios ultraestructurales en Staphylococcus aureus sometida a campos eléctricos pulsantes

Early stationary phase cells of Staphylococcus aureus were inoculated into a model food, simulated milk ultrafiltrate (SMUF) and subjected to 16, 32, and 64 pulses at electric field intensities of 20, 40 and 60 kV/cm at 13 °C. In addition temperatures of 20, 25 and 30 °C were also tested with 32 pulses and an electric field of 60 kV/cm. The temperature of the SMUF increased by 1-2 ° C at the end of the 64 pulses. Cells subjected to 64 pulses at 20, 40 and 60 kV/cm were observed for ultrastructural changes using scanning and transmission electron microscopy techniques. The cell surface was rough after treatment with electric field when observed by scanning electron microscopy (SEM). The cell wall was broken, and the cytoplasmic contents were leaking out of the cell after exposure to 64 pulses at 60 kV/cm when observed by transmission electron microscopy (TEM). The breaking of the cell wall is an indication of electro-mechanical breakdown of the cell. The increase in inactivation with an increase in the electric field strength can be related to the increase in the damage to the cells. Cells subjected to 32 pulses at 60 kV/cm and 13, 20 or 25 °C were compared microscopically with the untreated control cells. Cells subjected to heat treat ment (10 min, at 66 °C) were compared with electric field-treated and untreated control cells. Although important changes were observed in the protoplast, no cell wall breakdown was observed in heat-treated cells when compared to the electric field-treated cells. This result indi cates a different mechanism of inactivation of cells with heat treatment.

Inactivación de formas esporuladas de Bacillus subtilis mediante campos eléctricos pulsantes de alta intensidad en combinacion con otras tecnicas de conservacion de alimentos/Inactivation of Bacillus subtilis spores using high intensity pulsed electric fields in combination with other food conservation technologies

The inactivation of Bacillus subtilis spores using high intensity pulsed electric fields (HIPEF) was investigated. Spores were not inactivated when HIPEF treatment (60 kV/cm, 75 pulses) was used alone. The combination of-HIPEF and moderate temperatures around 60°C, and/or the activation of spore suspension prior to HIPEF treatment, and/or the use of up to 5000 IU/ml lysozyme, did not inactivate spores. High hydrostatic pressure (1500 atm, 30 min, 40°C) resulted in the initiation of germination of more than five log cycles in the number of spores, making them sensitive to subsequent pasteurization heat treatment, whereas they were not sensitive to subsequent HIPEF treatment at temperatures less than 40 °C. An intermediate step is needed which allows the outgrowth of spores to vegetative cells. Thus, the combination of high hydrostatic pressure and HIPEF treatment offers an attractive alternative to the stabilization of food products by heat to inactivate spores.

Cell wall as a target for bacteria inactivation by pulsed electric fields

The integrity and morphology of bacteria is sustained by the cell wall, the target of the main microbial inactivation processes. One promising approach to inactivation is based on the use of pulsed electric fields (PEF). The current dogma is that irreversible cell membrane electro-permeabilisation causes the death of the bacteria. However, the actual effect on the cell-wall architecture has been poorly explored. Here we combine atomic force microscopy and electron microscopy to study the cell-wall organization of living Bacillus pumilus bacteria at the nanoscale. For vegetative bacteria, exposure to PEF led to structural disorganization correlated with morphological and mechanical alterations of the cell wall. For spores, PEF exposure led to the partial destruction of coat protein nanostructures, associated with internal alterations of cortex and core. Our findings reveal for the first time that the cell wall and coat architecture are directly involved in the electro-eradication of bacteria.

Pretreatments for the efficient extraction of bioactive compounds from plant-based biomaterials

The extraction of medicinal or functional compounds from herbal plants is an important unit operation in food and bio-industries. The target compounds are generally present inter- or intra-cellularly in an intricate microstructure formed by cells, intercellular spaces, capillaries, and pores. The major resistance of molecular diffusion in materials of plant origin always comes from the intact cell walls and adhering membranes. Therefore, increasing the permeability of cell walls and membranes plays a very important role to increase extraction yield and/or extraction rate. Important pretreatment methods to modify the cellular structures and increase the permeability of cell walls or membranes are discussed in this paper. They include physical, biologic, and chemical treatments. In physical methods, mechanical disruption, high-pressure (HP) process, pulsed electric field (PEF) application, ultrasonic treatment, and freeze-thaw, and so on were applied. In biologic methods, different cell wall-degrading enzymes were applied to break-down cell walls or membranes and to diminish the overall internal resistance for transporting bioactive compounds from internal matrix to the external solution. In chemical methods, various chemicals for increasing the inner- or outer-membrane permeabilization were introduced. The principles of the technologies, examples of improvements, and advantages and disadvantages of the pretreatment methods are critically reviewed in this paper.