The two way memory effect in copper-based shape memory alloys — thermodynamics and mechanisms

Soft Self-Healing Robot Driven by New Micro Two-Way Shape Memory Alloy Spring

Soft robotic bodies are susceptible to mechanical fatigue, punctures, electrical breakdown, and aging, which can result in the degradation of performance or unexpected failure. To overcome these challenges, a soft self-healing robot is created using a thermoplastic methyl thioglycolate-modified styrene-butadiene-styrene (MG-SBS) elastomer tube fabricated by melt-extrusion, to allow the robot to self-heal autonomously at room temperature. After repeated damage and being separated into several parts, the robot is able to heal its stiffness and elongation to break to enable almost complete recovery of robot performance after being allowed to heal at room temperature for 24 h. The self-healing capability of the robot is examined across the material scale to robot scale by detailed investigations of the healing process, healing efficiency, mechanical characterization of the robot, and assessment of dynamic performance before and after healing. The self-healing robot is driven by a new micro two-way shape-memory alloy (TWSMA) spring actuator which achieved a crawling speed of 21.6 cm/min, equivalent to 1.57 body length per minute. An analytical model of the robot is created to understand the robot dynamics and to act as an efficient tool for self-healing robot design and optimization. This work therefore provides a new methodology to create efficient, robust, and damage-tolerant soft robots.

Achieving Superior Two-Way Actuation by the Stress-Coupling of Nanoribbons and Nanocrystalline Shape Memory Alloy

Inspired by the driving principle of traditional bias-type two-way actuators, we developed a novel two-way actuation nanocomposite wire in which a massive number of Nb nanoribbons with ultralarge elastic strains are loaded inside a shape memory alloy (SMA) matrix to form a continuous array of nanobias actuation pairs for two-way actuation. The composite exhibits a two-way actuation strain of 3.2% during a thermal cycle and an actuation stress of 934 MPa upon heating, which is about twice as high as that (∼500 MPa) found in reported two-way SMAs. Upon cooling, the composite shows an actuation stress of 134 MPa and a mechanical work output of 1.08 × 10(6) J/m(3), which are about three and five times higher than those of reported two-way SMAs, respectively. It was revealed that the massive number of Nb nanoribbons in the compressive state provides the high actuation stress and high work output upon cooling, and the SMA matrix with high yield strength offers the high actuation stress upon heating. Compared to traditional bias-type two-way actuators, the two-way actuation composite with a small volume and simple construct works well with the miniaturization and simplification of actuators.