Glutathione proteins

Scanning electrochemical microscopy studies of glutathione-modified surfaces. An erasable and sensitive-to-reactive oxygen species surface

A surface sensitive to reactive oxygen species (ROS) was prepared by reduction of a diazonium salt on glassy carbon electrode followed by the chemical coupling of glutathione (GSH) playing the role of an antioxidant species. The presence of active GSH was characterized through spectroscopic studies and electrochemical analysis after labeling of the -SH group with ferrocene moieties. The specific reactivity of GSH vs ROS was evaluated with scanning electrochemical microscopy (SECM) using the reduction of O(2) to superoxide, O(2)(•-), near the GSH-modified surface. Approach curves show a considerable decrease of the blocking properties of the layer due to reaction of the immobilized GSH with O(2)(•-) and the passage of GSH to the glutathione disulfide (GSSG). The initial surface could be regenerated several times with no significant variations of its antioxidant capacity by simply using the biological system glutathione reductase (GR)/NADPH that reduces GSSG back to GSH. SECM imaging shows also the possibility of writing local and erasable micropatterns on the GSH surface by production of O(2)(•-) at the tip probe electrode.

Structure of glutathione S-transferase of the filarial parasite Wuchereria bancrofti: a target for drug development against adult worm

A three dimensional structural model of Glutathione-S-transferase (GST) of the lymphatic filarial parasite Wuchereria bancrofti (wb) was constructed by homology modeling. The three dimensional X-ray crystal structure of porcine pi-class GST with PDB ID: 2gsr-A chain protein with 42% sequential and functional homology was used as the template. The model of wbGST built by MODELLER6v2 was analyzed by the PROCHECK programs. Ramachandran plot analysis showed that 93.5% of the residues are in the core region followed by 5.4 and 1.1% residues in the allowed and generously allowed regions, respectively. None of the non-glycine residues is in disallowed regions. The PROSA II z-score and the energy graph for the final model further confirmed the quality of the modeled structure. The computationally modeled three-dimensional (3D) structure of wbGST has been submitted to the Protein Data Bank (PDB) (PDB ID: 1SFM and RCSB ID: RCSB021668). 1SFM was used for docking with GST inhibitors by Hex4.2 macromolecular docking using spherical polar Fourier correlations.

Molecular basis for the polymerization of octopus lens S-crystallin

S-Crystallin from octopus lens has a tertiary structure similar to sigma-class glutathione transferase (GST). However, after isolation from the lenses, S-crystallin was found to aggregate more easily than sigma-GST. In vitro experiments showed that the lens S-crystallin can be polymerized and finally denatured at increasing concentration of urea or guanidinium chloride (GdmCl). In the intermediate concentrations of urea or GdmCl, the polymerized form of S-crystallin is aggregated, as manifested by the increase in light scattering and precipitation of the protein. There is a delay time for the initiation of polymerization. Both the delay time and rate of polymerization depend on the protein concentration. The native protein showed a maximum fluorescence emission spectrum at 341 nm. The GdmCl-denatured protein exhibited two fluorescence maxima at 310 nm and 358 nm, respectively, whereas the urea-denatured protein showed a fluorescence peak at 358 nm with a small peak at 310 nm. The fluorescence intensity was quenched. Monomers, dimers, trimers, and polymers of the native protein were observed by negative-stain electron microscopic analysis. The aggregated form, however, showed irregular structure. The aggregate was solubilized in high concentrations of urea or GdmCl. The redissolved denatured protein showed an identical fluorescence spectrum to the protein solution that was directly denatured with high concentrations of urea or GdmCl. The denatured protein was readily refolded to its native state by diluting with buffer solution. The fluorescence spectrum of the renatured protein solution was similar to that of the native form. The phase diagrams for the S-crystallin in urea and GdmCl were constructed. Both salt concentration and pH value of the solution affect the polymerization rate, suggesting the participation of ionic interactions in the polymerization. Comparison of the molecular models of the S-crystallin and sigma-GST suggests that an extra ion-pair between Asp-101 and Arg-14 in S-crystallin contributes to stabilizing the protomer. Furthermore, the molecular surface of S-crystallin has a protruding Lys-208 on one side and a complementary patch of aspartate residues (Asp-90, Asp-94, Asp-101, Asp-102, Asp-179, and Asp-180) on the other side. We propose a molecular model for the S-crystallin polymer in vivo, which involves side-by-side associations of Lys-208 from one protomer and the aspartate patch from another protomer that allows the formation of a polymeric structure spontaneously into a liquid crystal structure in the lens.

Homology modeling of cephalopod lens S-crystallin: a natural mutant of sigma-class glutathione transferase with diminished endogenous activity

The soluble S-crystallin constitutes the major lens protein in cephalopods. The primary amino acid sequence of S-crystallin shows an overall 41% identity with the digestive gland sigma-class glutathione transferase (GST) of cephalopod. However, the lens S-crystallin fails to bind to the S-hexylglutathione affinity column and shows very little GST activity in the nucleophilic aromatic substitution reaction between GSH and 1-chloro-2,4-dinitrobenzene. When compared with other classes of GST, the S-crystallin has an 11-amino acid residues insertion between the conserved alpha4 and alpha5 helices. Based on the crystal structure of squid sigma-class GST, a tertiary structure model for the octopus lens S-crystallin is constructed. The modeled S-crystallin structure has an overall topology similar to the squid sigma-class GST, albeit with longer alpha4 and alpha5 helical chains, corresponding to the long insertion. This insertion, however, makes the active center region of S-crystallin to be in a more closed conformation than the sigma-class GST. The active center region of S-crystallin is even more shielded and buried after dimerization, which may explain for the failure of S-crystallin to bind to the immobilized-glutathione in affinity chromatography. In the active site region, the electrostatic potential surface calculated from the modeled structure is quite different from that of squid GST. The positively charged environment, which contributes to stabilize the negatively charged Meisenheimer complex, is altered in S-crystallin probably because of mutation of Asn99 in GST to Asp101 in S-crystallin. Furthermore, the important Phe106 in authentic GST is changed to His108 in S-crystallin. Combining the topological differences as revealed by computer graphics and sequence variation at these structurally relevant residues provide strong structural evidences to account for the much decreased GST activity of S-crystallin as compared with the authentic GST of the digestive gland.

The 3.0 A projection structure of microsomal glutathione transferase as determined by electron crystallography of p 21212 two-dimensional crystals

Two-dimensional crystals of rat microsomal glutathione transferase were grown during dialysis of detergent-solubilized enzyme after addition of a small amount of phospholipid. The crystals had two-sided plane group symmetry p21212 with a calibrated unit cell size of a=91.90 A, b=90.83 A. Electron diffraction patterns were recorded showing significant reflections extending to 3.0 A. A combination of these structure factor amplitudes with phases from high-resolution images following image processing was used to calculate a projection map of the protein. The asymmetric unit of the structure consists of three microsomal glutathione transferase molecules. The local 3-fold axis at the center of the trimer is delineated by six parallel alpha-helices, two from each monomer. The two helices differ significantly in their respective projection structure. The inner helical core of the trimer is partly surrounded by elongated domains with extensions towards the helices and which contain resolved density maxima at a spacing of 4 to 5 A. A well-defined strong peak is localized close to the elongated domain and at a distance of about 9.5 A from two of the inner helices.

Three-dimensional structure of Schistosoma japonicum glutathione S-transferase fused with a six-amino acid conserved neutralizing epitope of gp41 from HIV

The 3-dimensional crystal structure of glutathione S-transferase (GST) of Schistosoma japonicum (Sj) fused with a conserved neutralizing epitope on gp41 (glycoprotein, 41 kDa) of human immunodeficiency virus type 1 (HIV-1) (Muster T et al., 1993, J Virol 67:6642-6647) was determined at 2.5 A resolution. The structure of the 3-3 isozyme rat GST of the mu gene class (Ji X, Zhang P, Armstrong RN, Gilliland GL, 1992, Biochemistry 31:10169-10184) was used as a molecular replacement model. The structure consists of a 4-stranded beta-sheet and 3 alpha-helices in domain 1 and 5 alpha-helices in domain 2. The space group of the Sj GST crystal is P4(3)2(1)2, with unit cell dimensions of a = b = 94.7 A, and c = 58.1 A. The crystal has 1 GST monomer per asymmetric unit, and 2 monomers that form an active dimer are related by crystallographic 2-fold symmetry. In the binding site, the ordered structure of reduced glutathione is observed. The gp41 peptide (Glu-Leu-Asp-Lys-Trp-Ala) fused to the C-terminus of Sj GST forms a loop stabilized by symmetry-related GSTs. The Sj GST structure is compared with previously determined GST structures of mammalian gene classes mu, alpha, and pi. Conserved amino acid residues among the 4 GSTs that are important for hydrophobic and hydrophilic interactions for dimer association and glutathione binding are discussed.

A diversified family of 12-kDa proteins with a high amino acid sequence similarity to macrophage migration-inhibitory factor (MIF)

Two isoforms of a bovine-brain-derived 12-kDa protein (designated p12a and p12b) whose N-termini have a high amino acid sequence similarity with the glycosylation-inhibiting factor (GIF) and macrophage migration-inhibitory factor (MIF) were purified to homogeneity. The complete amino acid sequence of bovine p12a (pI 9.5) was determined by Edman degradation of the intact molecule and overlapping fragments generated by proteolytic cleavage. The p12a isoform has nine and ten conservative substitutions versus human GIF (hGIF) and human MIF (hMIF), respectively. Molecular filtration revealed that both isoforms of p12 exist as monomers in aqueous solution. Circular dichroism spectra indicate that both isoforms of p12 consist of 39 +/- 3% alpha helix, 23 +/- 3% beta structure and 15 +/- 3% beta turns. Although the N-terminal parts of p12a and p12b have weak amino acid sequence similarity with that of glutathione S-transferase (GST) neither isoform of p12 was bound to a GST-affinity gel nor had GST activity. Despite a high amino acid sequence similarity with human MIF neither of the p12 isoforms inhibited migration of the mouse monocyte-macrophage cells P338D1.