Thermostability and thermoactivity of enzymes from hyperthermophilic Archaea

Taxonomic identification, phenol biodegradation and soil remediation of the strain Rhodococcus sacchari sp. nov. Z13T

Phenols are highly toxic chemicals that are extensively used in industry and produce large amounts of emissions. Notably, phenols released into the soil are highly persistent, causing long-term harm to human health and the environment. In this study, a gram-positive, aerobic, and rod-shaped bacterial strain, Z13T, with efficient phenol degradation ability, was isolated from the soil of sugarcane fields. Based on the physiological properties and genomic features, strain Z13T is considered as a novel species of the genus Rhodococcus, for which the name Rhodococcus sacchari sp. nov. is proposed. The type strain is Z13T (= CCTCC AB 2022327T = JCM 35797T). This strain can use phenol as its sole carbon source. Z13T was able to completely degrade 1200 mg/L phenol within 20 h; the maximum specific growth rate was μmax = 0.93174 h-1, and the maximum specific degradation rate was qmax = 0.47405 h-1. Based on whole-genome sequencing and Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis, strain Z13T contains a series of phenol degradation genes, including dmpP, CatA, dmpB, pcaG, and pcaH, and can metabolize aromatic compounds. Moreover, the potential of strain Z13T for soil remediation was investigated by introducing Z13T into simulated phenol-contaminated soil, and the soil microbial diversity was analyzed. The results showed that 100% of the phenol in the soil was removed within 7.5 d. Furthermore, microbial diversity analysis revealed an increase in the relative species richness of Oceanobacillus, Chungangia, and Bacillus.

Physiological limits to life in anoxic subseafloor sediment

In subseafloor sediment, microbial cell densities exponentially decrease with depth into the fermentation zone. Here, we address the classical question of 'why are cells dying faster than they are growing?' from the standpoint of physiology. The stoichiometries of fermentative ATP production and consumption in the fermentation zone place bounds on the conversion of old cell biomass into new. Most fermentable organic matter in deep subseafloor sediment is amino acids from dead cells because cells are mostly protein by weight. Conversion of carbon from fermented dead cell protein into methanogen protein via hydrogenotrophic and acetoclastic methanogenesis occurs at ratios of ∼200:1 and 100:1, respectively, while fermenters can reach conversion ratios approaching 6:1. Amino acid fermentations become thermodynamically more efficient at lower substrate and product concentrations, but the conversion of carbon from dead cell protein into fermenter protein is low because of the high energetic cost of translation. Low carbon conversion factors within subseafloor anaerobic feeding chains account for exponential declines in cellular biomass in the fermentation zone of anoxic sediments. Our analysis points to the existence of a life-death transition zone in which the last biologically catalyzed life processes are replaced with purely chemical reactions no longer coupled to life.

Structures of catalytic cycle intermediates of the Pyrococcus furiosus methionine adenosyltransferase demonstrate negative cooperativity in the archaeal orthologues

Methionine adenosyltransferases catalyse the biosynthesis of S-adenosylmethionine, the primary methyl group donor in biochemical reactions, through the condensation of methionine and ATP. Here, we report the structural analysis of the Pyrococcus furiosus methionine adenosyltransferase (PfMAT) captured in the unliganded, substrate- and product-bound states. The conformational changes taking place during the enzymatic catalytic cycle are allosterically propagated by amino acid residues conserved in the archaeal orthologues to induce an asymmetric dimer structure. The distinct occupancy of the active sites within a PfMAT dimer is consistent with a half-site reactivity that is mediated by a product-induced negative cooperativity. The structures of intermediate states of PfMAT reported here suggest a distinct molecular mechanism for S-adenosylmethionine synthesis in Archaea, likely consequence of the evolutionary pressure to achieve protein stability under extreme conditions.

Biochemical characterization of a thermostable adenosylmethionine synthetase from the archaeon Pyrococcus furiosus with high catalytic power

Adenosylmethionine synthetase plays a key role in the biogenesis of the sulfonium compound S-adenosylmethionine, the principal widely used methyl donor in the biological methylations. We report here, for the first time, the characterization of adenosylmethionine synthetase from the hyperthermophilic archaeon Pyrococcus furiosus (PfMAT). The gene PF1866 encoding PfMAT was cloned and expressed, and the recombinant protein was purified to homogeneity. PfMAT shares 51, 63, and 82% sequence identity with the homologous enzymes from Sulfolobus solfataricus, Methanococcus jannaschii, and Thermococcus kodakarensis, respectively. PfMAT is a homodimer of 90 kDa highly thermophilic with an optimum temperature of 90 °C and is characterized by remarkable thermodynamic stability (Tm, 99 °C), kinetic stability, and resistance to guanidine hydrochloride-induced unfolding. The latter process is reversible as demonstrated by the analysis of the refolding process by activity assays and fluorescence measurements. Limited proteolysis experiments indicated that the proteolytic cleavage site is localized at Lys148 and that the C-terminal peptide is necessary for the integrity of the active site. PfMAT shows kinetic features that make it the most efficient catalyst for S-adenosylmethionine synthesis among the characterized MAT from Bacteria and Archaea. Molecular and structural characterization of PfMAT could be useful to improve MAT enzyme engineering for biotechnological applications.

Inflammatory Thermophilic Fungi are Used in Biotechnology Applications

Thermophilic microorganisms which can colonize at extreme ecological niches are known as extremophiles. Because of their capacity to withstand high temperatures, enzymes from these organisms are relatively heat stable. The versatile enzyme properties of these organisms make them excellent candidates in biotechnology. In general, fungi have been widely used for the production of proteins and enzymes, since they can grow rapidly in a low cost media and they secrete proteins into the extra-cellular medium. Recently, these organisms have also been used in large scale fermentation as host for the expression of heterologous proteins in industrial applications. However, little is known about the regulation and genetic manipulations of these fungi. We have previously shown the regulation of gene expression in a thermophilic fungus, Thermyces lanuginosus, using an inducible invertase system. The aim of this review is to elucidate the recent advances of thermophilic fungi, and their implications in industrial applications are discussed.

S-adenosylhomocysteine hydrolase from the archaeon Pyrococcus furiosus: biochemical characterization and analysis of protein structure by comparative molecular modeling

S-adenosylhomocysteine hydrolase (AdoHcyHD) is an ubiquitous enzyme that catalyzes the breakdown of S-adenosylhomocysteine, a powerful inhibitor of most transmethylation reactions, to adenosine and L-homocysteine. AdoHcyHD from the hyperthermophilic archaeon Pyrococcus furiosus (PfAdoHcyHD) was cloned, expressed in Escherichia coli, and purified. The enzyme is thermoactive with an optimum temperature of 95 degrees C, and thermostable retaining 100% residual activity after 1 h at 90 degrees C and showing an apparent melting temperature of 98 degrees C. The enzyme is a homotetramer of 190 kDa and contains four cysteine residues per subunit. Thiol groups are not involved in the catalytic process whereas disulfide bond(s) could be present since incubation with 0.8 M dithiothreitol reduces enzyme activity. Multiple sequence alignment of hyperthermophilic AdoHcyHD reveals the presence of two cysteine residues in the N-terminus of the enzyme conserved only in members of Pyrococcus species, and shows that hyperthermophilic AdoHcyHD lack eight C-terminal residues, thought to be important for structural and functional properties of the eukaryotic enzyme. The homology-modeled structure of PfAdoHcyHD shows that Trp220, Tyr181, Tyr184, and Leu185 of each subunit and Ile244 from a different subunit form a network of hydrophobic and aromatic interactions in the central channel formed at the subunits interface. These contacts partially replace the interactions of the C-terminal tail of the eukaryotic enzyme required for tetramer stability. Moreover, Cys221 and Lys245 substitute for Thr430 and Lys426, respectively, of the human enzyme in NAD-binding. Interestingly, all these residues are fairly well conserved in hyperthermophilic AdoHcyHDs but not in mesophilic ones, thus suggesting a common adaptation mechanism at high temperatures.

Methylthioadenosine phosphorylase from the archaeon Pyrococcus furiosus. Mechanism of the reaction and assignment of disulfide bonds

The extremely heat-stable 5'-methylthioadenosine phosphorylase from the hyperthermophilic archaeon Pyrococcus furiosus was cloned, expressed to high levels in Escherichia coli, and purified to homogeneity by heat precipitation and affinity chromatography. The recombinant enzyme was subjected to a kinetic analysis including initial velocity and product inhibition studies. The reaction follows an ordered Bi-Bi mechanism and phosphate binding precedes nucleoside binding in the phosphorolytic direction. 5'-Methylthioadenosine phosphorylase from Pyrococcus furiosus is a hexameric protein with five cysteine residues per subunit. Analysis of the fragments obtained after digestion of the protein alkylated without previous reduction identified two intrasubunit disulfide bridges. The enzyme is very resistant to chemical denaturation and the transition midpoint for guanidinium chloride-induced unfolding was determined to be 3.0 M after 22 h incubation. This value decreases to 2.0 M in the presence of 30 mM dithiothreitol, furnishing evidence that disulfide bonds are needed for protein stability. The guanidinium chloride-induced unfolding is completely reversible as demonstrated by the analysis of the refolding process by activity assays, fluorescence measurements and SDS/PAGE. The finding of multiple disulfide bridges in 5'-methylthioadenosine phosphorylase from Pyrococcus furiosus argues strongly that disulfide bond formation may be a significant molecular strategy for stabilizing intracellular hyperthermophilic proteins.

A novel hyperthermostable 5′-deoxy-5′-methylthioadenosine phosphorylase from the archaeon Sulfolobus solfataricus

We report herein the first molecular characterization of 5'-deoxy-5'-methylthio-adenosine phosphorylase II from Sulfolobus solfataricus (SsMTAPII). The isolated gene of SsMTAPII was overexpressed in Escherichia coli BL21. Purified recombinant SsMTAPII is a homohexamer of 180 kDa with an extremely low Km (0.7 microm) for 5'-deoxy-5'-methylthioadenosine. The enzyme is highly thermophilic with an optimum temperature of 120 degrees C and extremely thermostable with an apparent Tm of 112 degrees C that increases in the presence of substrates. The enzyme is characterized by high kinetic stability and remarkable SDS resistance and is also resistant to guanidinium chloride-induced unfolding with a transition midpoint of 3.3 m after 22-h incubation. Limited proteolysis experiments indicated that the only one proteolytic cleavage site is localized in the C-terminal region and that the C-terminal peptide is necessary for the integrity of the active site. Moreover, the binding of 5'-deoxy-5'-methylthioadenosine induces a conformational transition that protected the enzyme against protease inactivation. By site-directed mutagenesis we demonstrated that Cys259, Cys261 and Cys262 play an important role in the enzyme stability since the mutants C259S/C261S and C262S show thermophilicity and thermostability features significantly lower than those of the wild-type enzyme. In order to get insight into the physiological role of SsMTAPII a comparative kinetic analysis with the homologous 5'-deoxy-5'-methylthioadenosine phosphorylase from Sulfolobus solfataricus (SsMTAP) was carried out. Finally, the alignment of the protein sequence of SsMTAPII with those of SsMTAP and human 5'-deoxy-5'-methylthioadenosine phosphorylase (hMTAP) shows several key residue changes that may account why SsMTAPII, unlike hMTAP, is able to recognize adenosine as substrate.

Adaptation of Class-13 α-Amylases to Diverse Living Conditions

There are currently 35 available nonredundant molecular structures of class-13 alpha-amylases (EC 3.2.1.1), mostly from microbial organisms living under a wide range of environmental conditions. One of the most recent additions has been the first alpha-amylase structure of a hyperthermophilic archaeon [Linden et al., J. Biol. Chem. 2003, 278, 9875-9884]. The structure has been used for comparative analyses with a representative set of three alpha-amylases from thermophilic, mesophilic and psychrophilic sources to identify molecular parameters for environmental adaptation. Our analysis supports generally observed trends such as an increase in structural compactness as well as an increase in salt bridges in order to cope with high-temperature conditions. The two representative thermophilic structures used in this comparative study have independently evolved di-metal centres--not present in the mesophilic and psychrophilic structures--in the vicinity of the active site. These observations may provide impetus for the design of alpha-amylases with improved molecular properties to enhance their utility in biotechnological processes.

Expression, purification, and characterization of recombinant S-adenosylhomocysteine hydrolase from the thermophilic archaeon Sulfolobus solfataricus

S-Adenosylhomocysteine hydrolase from Sulfolobus solfataricus was expressed in Escherichia coli by inserting the genomic fragment containing the gene encoding for S-adenosylhomocysteine hydrolase downstream the isopropyl-beta-d-thiogalactoside-inducible promoter of pTrc99A expression vector. An ATG positioned 25 bp upstream of the gene which is in frame with a stop codon was utilized as the initiation codon. This construct was used to transform E. coli RB791 and E. coli JM105 strains. The recombinant protein, purified by a fast and efficient two-step procedure (yield of 0.4 mg of enzyme per gram of cells), does not appear homogeneous on SDS-PAGE because of the presence of a protein contaminant corresponding to a "truncated" S-adenosylhomocysteine hydrolase subunit lacking the first 24 amino acid residues. The recombinant enzyme shows the same molecular mass, optimum temperature, and kinetic features of S-adenosylhomocysteine hydrolase isolated from S. solfataricus but it is less thermostable. To construct a vector which presents a correct distance between the ribosome-binding site and the start codon of S-adenosylhomocysteine hydrolase gene, a NcoI site was created at the translation initiation codon using site-directed mutagenesis. The expression of the homogeneous mutant S-adenosylhomocysteine hydrolase was achieved at high level (1.7 mg of mutant protein per gram of cells). The mutant S-adenosylhomocysteine hydrolase and the native one were indistinguishable in all physicochemical and kinetic properties including thermostability, indicating that the interactions involving the NH(2)-terminal sequence of the protein play a role in the thermal stability of S. solfataricus S-adenosylhomocysteine hydrolase.

Purification and Characterization of Two Functional Forms of Intracellular Protease PfpI from the Hyperthermophilic Archaeon Pyrococcus furiosus

The hyperthermophilic archaeon Pyrococcus furiosus grows optimally at 100(deg)C by the fermentation of peptides and carbohydrates. From this organism, we have purified to homogeneity an intracellular protease, previously designated PfpI (P. furiosus protease I) (S. B. Halio, I. I. Blumentals, S. A. Short, B. M. Merrill, and R. M. Kelly, J. Bacteriol. 178:2605-2612, 1996). The protease contains a single subunit with a molecular mass of approximately 19 kDa and exists in at least two functional conformations, which were purified separately. The predominant form from the purification (designated PfpI-C1) is a hexamer with a molecular mass of 124 (plusmn) 6 kDa (by gel filtration) and comprises about 90% of the total activity. The minor form (designated PfpI-C2) is trimeric with a molecular mass of 59 (plusmn) 3 kDa. PfpI-C1 hydrolyzed both basic and hydrophobic residues in the P1 position, indicating trypsin- and chymotrypsin-like specificities, respectively. The temperature optimum for Ala-Ala-Phe-7-amido-4-methylcoumarin (AAF-MCA) hydrolysis was (symbl)85(deg)C both for purified PfpI-C1 and for proteolytic activity in P. furiosus cell extract. In contrast, the temperature optimum for PfpI prepared by incubating a cell extract of P. furiosus at 98(deg)C in 1% sodium dodecyl sulfate for 24 h at 95 to 100(deg)C (I. I. Blumentals, A. S. Robinson, and R. M. Kelly, Appl. Environ. Microbiol. 56:1255-1262, 1990), designated PfpI-H, was (symbl)100(deg)C. Moreover, the half-life of activity of PfpI-C1 at 98(deg)C was less than 30 min, in contrast to a value of more than 33 h measured for PfpI-H. PfpI-C1 appears to be a predominant serine-type protease in cell extracts but is converted in vitro, probably in part by deamidation of Asn and Gln residues, to a more thermally stable form (PfpI-H) by prolonged heat treatment. The deamination hypothesis is supported by the differences in the measured pI values of PfpI-C1 (6.1) and PfpI-H (3.8). High levels of potassium phosphate (>0.5 mM) were found to extend the half-life of PfpI-C1 activity towards AAF-MCA by up to 2.5-fold at 90(deg)C, suggesting that compatible solutes play an important role in the in vivo function of this protease.

Extremely thermophilic and thermostable 5'-methylthioadenosine phosphorylase from the archaeon Sulfolobus solfataricus. Gene cloning and amino acid sequence determination

A gene encoding an extremely thermophilic and thermostable 5'-methylthioadenosine phosphorylase was cloned from the archaeon Sulfolobus solfataricus. Two degenerate oligodeoxyribonucleotide probes synthesized on the basis of the N-terminal amino acid sequence of the protein were used to screen a genomic library of S. solfataricus cloned into the pGEM7Zf(+) vector. The DNA fragment of 2118 bp containing the 5'-methylthioadenosine phosphorylase gene was sequenced. The open reading frame comprises 711 nucleotides, which includes the stop codon, and encodes a protein of 236 residues whose molecular mass is in good agreement with the value determined by gel filtration for the purified enzyme. The N- and C-terminal sequences of the protein and the sequences of the peptides prepared by cyanogen bromide cleavage exactly match with the corresponding sequences deduced from the gene, thus confirming the identity of the 5'-methylthioadenosine phosphorylase gene. Typical archaebacterial regulatory sites were identified in the flanking regions and a potential Shine-Dalgarno-like sequence was recognized around the ATG initiation codon. The deduced amino acid sequence showed 32% identity and 30% identity with Escherichia coli purine-nucleoside phosphorylase and with E, coli uridine phosphorylase, respectively. Evolutionary and structural implications of this similarity are discussed.

Sequence, expression in Escherichia coli, and analysis of the gene encoding a novel intracellular protease (PfpI) from the hyperthermophilic archaeon Pyrococcus furiosus

A previously identified intracellular proteolytic activity in the hyperthermophilic archaeon Pyrococcus furiosus (I. I. Blumentals, A. S. Robinson, and R. M. Kelly, Appl. Environ. Microbiol. 56:1992-1998, 1990) was found to be a homomultimer consisting of 18.8-kDa subunits. Dissociation of this native P. furiosus protease I (PfpI) into a single subunit was seen by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) but only after trichloroacetic acid precipitation; heating to 95 degrees C in the presence of 2% SDS and 80 mM dithiothreitol did not dissociate the protein. The gene (pfpI) coding for this protease was located in genomic digests by Southern blotting with probes derived from the N-terminal amino acid sequence. pfpI was cloned, sequenced, and expressed in active form in Escherichia coli as a fusion protein with a histidine tag. The recombinant protease from E. coli showed maximum proteolytic activity at 95 degrees C, and its half-life was 19 min at this temperature. This level of stability was significantly below that previously reported for the enzyme purified by electroelution of a 66-kDa band from SDS-PAGE after extended incubation of cell extracts at 98 degrees C in 1% SDS (>30 h). The pfpI gene codes for a polypeptide of 166 amino acid residues lacking any conserved protease motifs; no protease activity was detected for the 18.8-kDa PfpI subunit (native or recombinant) by substrate gel assay. Although an immunological relationship of this protease to the eukaryotic proteasome has been seen previously, searches of the available databases identified only two similar amino acid sequences: an open reading frame of unknown function from Staphylococcus aureus NCTC 8325 (171 amino acid residues, 18.6 kDa, 41% identity) and an open reading frame also of unknown function in E. coli (172 amino acid residues, 18.8 kDa, 47% identity). Primer extension experiments with P. furiosus total RNA defined the 5' end of the transcript. There are only 10 nucleotides upstream of the start of translation; therefore, it is unlikely that there are any pre- or pro-regions associated with PfpI which could have been used for targeting or assembly of this protease. Although PfpI activity appears to be the dominant proteolytic activity in P. furiosus cell extracts, the physiological function of PfpI is unclear.

Extremozymes: expanding the limits of biocatalysis

The study of enzymes isolated from organisms inhabiting unconventional ecosystems has led to the realization that biocatalysis need not be constrained to mild conditions and can be considered at pH's, temperatures, pressures, ionic and solvent environments long thought to be destructive to biomolecules. Parallel to this, it has been demonstrated that even conventional enzymes will catalyze reactions in solvents other than water. However, the intrinsic basis for biological function under extreme conditions is only starting to be addressed, as are associated applications. This was the focus of a recent NSF/NIST-sponsored workshop on extremozymes. Given the information acquired from the study of extremozymes, modification of enzymes to improve their ranges of stability and activity remains a possibility. Ultimately, by expanding the range of conditions suitable for enzyme function, new opportunities to use biocatalysis will be created.

xylA cloning and sequencing and biochemical characterization of xylose isomerase from Thermotoga neapolitana

The xylA gene coding for xylose isomerase from the hyperthermophile Thermotoga neapolitana 5068 was cloned, sequenced, and expressed in Escherichia coli. The gene encoded a polypeptide of 444 residues with a calculated molecular weight of 50,892. The native enzyme was a homotetramer with a molecular weight of 200,000. This xylose isomerase was a member of the family II enzymes (these differ from family I isomerases by the presence of approximately 50 additional residues at the amino terminus). The enzyme was extremely thermostable, with optimal activity above 95 degrees C. The xylose isomerase showed maximum activity at pH 7.1, but it had high relative activity over a broad pH range. The catalytic efficiency (kcat/Km) of the enzyme was essentially constant between 60 and 90 degrees C, and the catalytic efficiency decreased between 90 and 98 degrees C primarily because of a large increase in Km. The T. neapolitana xylose isomerase had a higher turnover number and a lower Km for glucose than other family II xylose isomerases. Comparisons with other xylose isomerases showed that the catalytic and cation binding regions were well conserved. Comparison of different xylose isomerase sequences showed that numbers of asparagine and glutamine residues decreased with increasing enzyme thermostability, presumably as a thermophilic strategy for diminishing the potential for chemical denaturation through deamidation at elevated temperatures.