Spectroscopy and photophysics of bridged enone derivatives: effect of molecular structure and solvent

Advancements in the development of fluorescent chemosensors based on CN bond isomerization/modulation mechanistic approaches

The CN bond isomerization/modulation as a fluorescence signalling mechanism was explored by studying the photophysical properties of conformationally restricted molecules. From the beginning, the CN bond isomerization method has attracted the attention of researchers owing to its simplicity, high selectivity, and sensitivity in fluorescence evaluation. Continuous developments in the field of sensing using CN bond-containing compounds have been achieved via the customization of the isomerization process around the CN bond in numerous ways, and the results were obtained in the form of specific discrete photophysical changes. CN isomerization causes significant fluorescence enhancement in response to detected metal cations and other reactive species (Cys, Hys, ClO-, etc.) straightforwardly and effectively. This review sheds light on the process of CN bond isomerization/modulation as a signalling mechanism depending on fluorescence changes via conformational restriction. In addition, CN bond isomerization-based fluorescent sensors have yet to be well reviewed, although several fluorescent sensors based on this signalling mechanism have been reported. Therefore, CN-based fluorescent sensors are summarized in this review.

Two-photon small-molecule fluorescence-based agents for sensing, imaging, and therapy within biological systems

In this tutorial review, we will explore recent advances for the design, construction and application of two-photon excited fluorescence (TPEF)-based small-molecule probes.

A multi-responsive crown ether-based colorimetric/fluorescent chemosensor for highly selective detection of Al3+, Cu2+ and Mg2

A novel multi-response chemosensor L based on coumarin-chalcone-crown ether was designed and synthesized, which exhibited a high selectivity for the colorimetric detecting Al³⁺ and Cu²⁺ and fluorescent recognizing Al³⁺ and Mg²⁺ in ethanol. L can monitor Al³⁺ and Cu²⁺ via distinct color changes from a slight yellow to pink and to orange, respectively. The sensor L can also monitor Al³⁺ and Mg²⁺ by fluorescence emission responses at 592 nm and 547 nm with low detection limits of 0.31 μM and 0.23 μM, respectively. The selectivity of L toward Al³⁺, Cu²⁺ and Mg²⁺ was not interfered by a large number of coexisting ions and was found to be reversible. By means of spectrometric titration, Job's plot, mass spectrometry, ¹H NMR titration and IR spectroscopy analysis, it was unanimously confirmed that the sensor L had a stoichiometric ratio of 1:1 with Cu²⁺ and Mg²⁺, and 1:2 with Al³⁺. The order of the stability of the complexes formed by L and Al³⁺, Cu²⁺, Mg²⁺ was as follows: L-Al³⁺ > L-Cu²⁺ > L-Mg²⁺. At the same time, some possible bonding modes and sensing mechanisms were further proposed, and the optimized structure of the sensor L and its sensing mechanism for Al³⁺, Cu²⁺ and Mg²⁺ were confirmed by the calculations of DFT/B3LYP and TD-DFT methods in a suite of Gaussian 09 programs.

Achieving Enhanced Thermally Activated Delayed Fluorescence Rates and Shortened Exciton Lifetimes by Constructing Intramolecular Hydrogen Bonding Channels

A fast radiative rate, highly suppressed nonradiation, and a short exciton lifetime are key elements for achieving efficient thermally activated delayed fluorescence (TADF) organic light-emitting diodes (OLEDs) with reduced efficiency roll-off at a high current density. Herein, four representative TADF emitters are designed and synthesized based on the combination of benzophenone (BP) or 3-benzoylpyridine (BPy3) acceptors, with dendritic 3,3″,6,6″-tetra-tert-butyl-9'H-9,3':6',9″-tercarbazole (CDTC) or 10H-spiro(acridine-9,9'-thioxanthene) (TXDMAc) donors, respectively. Density functional theory simulation and X-ray diffraction analysis validated the formation of CH···N intramolecular hydrogen bonds regarding the BPy3-CDTC and BPy3-TXDMAc compounds. Notably, the construction of intramolecular hydrogen bonding within TADF emitters significantly enhances the intramolecular charge transfer (ICT) strength while reducing the donor-acceptor (D-A) dihedral angle, resulting in accelerated radiative and suppressed nonradiative processes. With short TADF exciton lifetimes (τ_TADF) and high photoluminescence quantum yields (ϕ_PL), OLEDs employing BPy3-CDTC and BPy3-TXDMAc dopants realized maximum external quantum efficiencies (EQEs) up to 18.9 and 25.6%, respectively. Moreover, the nondoped device based on BPy3-TXDMAc exhibited a maximum EQE of 18.7%, accompanied by an extremely small efficiency loss of only 4.1% at the luminance of 1000 cd m^-2. In particular, the operational lifetime of the sky-blue BPy3-CDTC-based device was greatly extended by 10 times in contrast to the BP-CDTC-based counterpart, verifying the idea that the in-built intramolecular hydrogen bonding strategy was promising for the realization of efficient and stable TADF-OLEDs.

Synthesis, Photophysical Properties, and Metal-Ion Recognition Studies of Fluoroionophores Based on 1-(2-Pyridyl)-4-Styrylpyrazoles

A convenient access toward novel fluoroionophores based on 1-(2-pyridyl)-4-styrylpyrazoles (PSPs) substituted at position 3 with donor or acceptor aryl groups is reported. The synthesis proceeds in two steps: the first one via Wittig olefination of the appropriate 4-formylpyrazole and then Mizoroki-Heck coupling to yield the desired products in an overall yield of up to 69%. Photophysical properties of products (4-styryl) and their intermediates (4-vinyl) were explored, finding that they have strong blue-light emission with high quantum yields (up to 66%) due to ICT phenomena. The 3-phenyl PSP was studied as a turn-off fluorescent probe in metal ion sensing, finding a high selectivity to Hg2+ (LOD = 3.1 × 10-7 M) in a process that could be reversed with ethylenediamine. The sensing mechanism and binding mode of the ligand to Hg2+ were established by HRMS analysis and 1H NMR titration tests.

Synthesis of novel 1,10-phenanthroline derivatives and it used as probes for sensitive detection of Zn2+ and Cd2+ metal ions - Spectroscopic and theoretical approach

A novel class of unexpected 1,10-phenanthrolinederivatives were synthesized from 2,3-dihydroacridin-4(1H)-ones with 3-aminonaphthalen-2-carboxylic acid in presence of phosphorus oxychloride at 130°C and simple perceptive emission intensity increasing assay was developed effectively to detect the very low concentrations of Zn²⁺ and Cd²⁺ ions. Emission intensity of compounds 3(a-c) directly related to the concentrations of Zn²⁺ and Cd²⁺ ions was due to metal chelating enhanced fluorescence (CHEF) effect and also its further validated by fluorescence lifetime measurement. Furthermore, the sensing mechanism for compounds 3(a-c) of Zn²⁺ and Cd²⁺ were sustained by theoretical calculations. Computational analysis results reveals that compounds 3(a-c) are more interested in Zn²⁺ ions than that of Cd²⁺ ions, while, compound 3c is more interested with Zn²⁺ and Cd²⁺ ions than those of the rest of the compounds. In addition, this proposed detection analysis has the direct application for monitoring Zn²⁺ and Cd²⁺ concentrations in tap and drinking water samples.

Femtosecond electronic relaxation and real-time vibrational dynamics in 2′-hydroxychalcone

Electronic relaxation, proton transfer and instantaneous vibrational frequency change after the impulsive excitation by a deep ultraviolet 9 fs pulse were studied.

Comparative DFT Computational Studies with Experimental Investigations for Novel Synthesized Fluorescent Pyrazoline Derivatives

A novel series of pyrazoline derivatives were synthesized and their spectral properties were characterized via FT-IR, ¹H, and ¹³C NMR. The electronic transitions and fluorescence properties were tracked via UV-Vis and emission spectrometry. The density functional theory (DFT) calculations have been also computed to get spot onto the geometry, electronic transitions and spectroscopic properties theoretically that has been compared with the encountered experimental ones. Moreover, the dipole moment, optimized energy, HOMO - LUMO energies and band gaps were calculated for novel candidates pyrazoline derivatives with highly fluorescence quantum yield.

Reversible mechanofluorochromism of aniline-terminated phenylene ethynylenes

Seven three-ring phenylene-ethynylene (PE) structural analogs, differing only in the lengths of alkyl chains on terminal aniline substituents, show 50-62 nm bathochromic shifts in emission maxima in response to mechanical force (mechanofluorochromism, MC). These shifts are fully reversible with heat or solvent fuming. Shearing of these solids yields a transition from green-emitting crystalline phases to orange-emitting amorphous phases as established by differential scanning calorimetry and X-ray diffraction. Molecules with shorter alkyl chain lengths required higher temperatures to recover the hypsochromically shifted crystalline phases after grinding, while the recovery with chain lengths longer than butyl occurred at room temperature. In addition to this structure-dependent thermochromism, these compounds retain their MC properties in polymer hosts to various extents. The crystalline phases of these materials have PE chromophores that are twisted due to non-covalent perfluoroarene-arene (ArF-ArH) interactions involving perfluorophenyl pendants and the terminal rings of the PE chromophore, resulting in interrupted conjugation and an absence of chromophore aggregation. The MC behavior of an analog without the perfluoroarene rings is severely attenuated. This work demonstrates the general utility of twisted PEs as stimuli-responsive moieties and reveals clear structure-property relationships regarding the effects of alkyl chain length on these materials.

Characterization of the Fluorescence Properties of 4-Dialkylaminochalcones and Investigation of the Cytotoxic Mechanism of Chalcones

Understanding the mechanisms responsible for the various biological activities of chalcones, particularly the direct cellular targets, presents an unmet challenge. Here, we prepared a series of fluorescent chalcone derivatives as chemical probes for their mechanistic investigation. Upon systematic physicochemical characterization, we explored their potential to elucidate the mode of action of chalcones' cytotoxicity. The fluorescence of the chalcones was found to be highly sensitive to structural and environmental factors. Structurally, a 4-dialkylamino group on the B ring, suitable electronic properties of the A ring substituents, and the planar conformation of the chalcone's core structure were essential for optimal fluorescence. Environmental factors influencing fluorescence included solvent polarity, pH, and the interactions of the chalcones with proteins and detergents. It was found that 18 chalcones showed a fluorescent brightness greater than 6000 M(-1)  cm(-1) in DMSO. However, water dramatically quenched the fluorescence, although it could be partially recovered in the presence of BSA or detergents. As expected, these fluorescent chalcones showed a sharp structure-activity relationship in their cellular cytotoxicity, leading to the identification of structurally similar cytotoxic and non-cytotoxic fluorescent chalcones as chemical probes. Confocal microscopy results revealed the co-localization of the cytotoxic probe C8 and tubulin in cells, supporting tubulin as the direct cellular target responsible for the cytotoxicity of chalcones.

Three-Fold C 3-Symmetric Off-On Fluorescent Chemo-Sensors for Fluoride

Three novel C 3-symmetric tris-salicylaldimine Schiff base based "off-on" fluorescence sensors have been designed and synthesized. The synthetic approach involves a simple imine bond (C = N) formation between 1,3,5-tris(4'-aminophenyl)benzene (TAPB) and 3,5-substituted salicylaldehydes. The presence of salicylaldehyde units on periphery of the tris-salicylaldimine Schiff bases masks the fluorescence of TAPB core. Interestingly, binding of fluoride ions to the salicylaldehyde units turns the fluorescence "on" in visible region. Fluoride ion detection limits for the present sensors have been calculated to be in the range of 0.17-3.0 ppm, which depends on the nature of the salicylaldehyde units.

"Rate-limited effect" of reverse intersystem crossing process: the key for tuning thermally activated delayed fluorescence lifetime and efficiency roll-off of organic light emitting diodes

The rate constant of reverse intersystem crossing was found to be the “rate-limited step” in thermally activated delayed fluorescence lifetime governing.

Issues concerning excited state lifetime (τ_TADF) tuning of thermally activated delayed fluorescence (TADF) materials are critical for organic light emitting diode (OLED) applications and other specific fields. For TADF-OLEDs, employing emitters with a short τ_TADF gives rise to suppressed singlet–triplet annihilation (STA) and triplet–triplet annihilation (TTA), leading to reduced efficiency roll-off at practical relevant brightness (100 and 1000 cd m^–2 for display and illumination applications, respectively). Through molecular design, exciton dynamic process rate constants including fluorescence (k_F), intersystem crossing (k_ISC), internal conversion (k_IC) and reverse intersystem crossing (k_RISC) are selectively altered, affording four representative TADF emitters. Based on lifetime and quantum yield measurements, k_F, k_ISC, k_IC and k_RISC are calculated for four emitters and their interrelationship matches corrected time-dependent density functional theory simulation. Among them, even with a small k_F, low photoluminescence quantum efficiency (Φ) and large k_ISC, molecules with a small singlet–triplet splitting energy (ΔE_ST) and lowest charge transfer triplet excited state (³CT) eventuate in shortening the τ_TADF. Herein, k_RISC, which is inversely proportional to ΔE_ST, turns out to be the rate-limited factor in tuning the τ_TADF (“rate limited effect” of the RISC process). As revealed by flexible potential surface scanning, PyCN–ACR exhibited a moderate k_F, reduced k_IC and enlarged k_RISC, resulting in a short τ_TADF and a moderate Φ with orange-red emission. OLEDs containing PyCN–ACR as the emitting guest achieved orange-red TADF-OLEDs with an emission peak at 590 nm and the best external quantum efficiencies (EQEs) of 12.4%/9.9%/5.1% at practical luminances of 100/1000/10 000 cd m^–2.

A review of mechanisms for fluorescent ‘‘turn-on’’ probes to detect Al3+ ions

The adverse effect of Al³⁺ ions on human health as well as the environment makes it desirable to develop sensitive and specific techniques for the detection of Al³⁺ ions.

Aggregation-induced emission enhancement in halochalcones

Decorating the periphery of chalcones with halogen atoms increased their aggregation-induced emission enhancement properties, even if their optoelectronic properties are dominated by the other substituents.

Design-specific mechanistic regulation of the sensing phenomena of two Schiff bases towards Al3+

We report herein two optical probes (R1 and R2) for the fluorogenic detection of Al³⁺ at the level of 10⁻⁸ M.

Photophysical properties and electronic structure of bacteriochlorin-chalcones with extended near-infrared absorption

Synthetic bacteriochlorins enable systematic tailoring of substituents about the bacteriochlorin chromophore and thereby provide insights concerning the native bacteriochlorophylls of bacterial photosynthesis. Nine free-base bacteriochlorins (eight prepared previously and one prepared here) have been examined that bear diverse substituents at the 13- or 3,13-positions. The substituents include chalcone (3-phenylprop-2-en-1-onyl) derivatives with groups attached to the phenyl moiety, a "reverse chalcone" (3-phenyl-3-oxo-1-enyl), and extended chalcones (5-phenylpenta-2,4-dien-1-onyl, retinylidenonyl). The spectral and photophysical properties (τs, Φf, Φ(ic), Φ(isc), τT, k(f), k(ic), k(isc)) of the bacteriochlorins have been characterized. The bacteriochlorins absorb strongly in the 780-800 nm region and have fluorescence quantum yields (Φf) in the range 0.05-0.11 in toluene and dimethylsulfoxide. Light-induced electron promotions between orbitals with predominantly substituent or macrocycle character or both may give rise to some net macrocycle ↔ substituent charge-transfer character in the lowest and higher singlet excited states as indicated by density functional theory (DFT) and time-dependent DFT calculations. Such calculations indicated significant participation of molecular orbitals beyond those (HOMO - 1 to LUMO + 1) in the Gouterman four-orbital model. Taken together, the studies provide insight into the fundamental properties of bacteriochlorins and illustrate designs for tuning the spectral and photophysical features of these near-infrared-absorbing tetrapyrrole chromophores.

Spectral properties of intramolecular charge transfer fluorescence probe 1-keto-2-(p-dimethylaminobenzal)-tetrahydronaphthalene

The photophysical properties of a new compound 1-keto-2-(p-dimethylaminobenzal)-tetrahydronaphthalene in various solvents at room temperature were characterized by the absorption and steady-state fluorescence technique. The bathochromic shift on the emission spectra, the broad halfwidth of the fluorescence band and the increase in the excited state dipole moment occurred. These results gave the evidence about the intramolecular charge transfer (ICT) character in the emitting singlet state of the compound.

Study on the fluorescence properties of a new intramolecular charge transfer compound 1,5-diphenyl-3-(N-ethylcarbazole-3-yl)-2-pyrazoline

The fluorescence properties of a newly synthesized compound, 1,5-diphenyl-3-(N-ethylcarbazole-3-yl)-2-pyrazoline (DEP) have been studied. On excitation at 352 nm, the fluorescence spectrum exhibits a large red shift with an increase in the polarity of solvents. The intensity of the band is different in different solvents as well. The change in the dipole moment in various solvents at room temperature has been characterized by the absorption and steady state fluorescence techniques and calculated based on the Lippert-Mataga equation. DEP has an increase of dipole moment of 2.83 D units on excitation to the lowest singlet state. It is concluded that photo-induced charge transfer from N (1) to C (3) actually exists in the excited state of the pyrazoline moiety. Its fluorescence property is relative to viscosity and temperature of solvents. The phi(f) of DEP in neutral medium or basic medium is higher than acidic medium. In addition, when the concentration of DEP is higher than 10(-3) M, its fluorescence is quenched by the collision of each molecule. The red shift of the maximum emission of DEP attributes to the formation of aggregates and the conjugate system is strengthened.

Dipolar relaxation in a lipid bilayer detected by a fluorescent probe, 4″-dimethylaminochalcone

The dynamic behavior of polar molecules in egg phosphatidylcholine (PC) bilayers has been studied using a membrane fluorescent probe, 4''-dimethylaminochalcone (DMAC). Time and spectrally resolved fluorescence spectroscopy of DMAC incorporated in PC liposomes, as compared to studies of the probe in organic solvents, shows the existence of two independent populations, associated with different extent and speed of dipolar solvent relaxation. The first DMAC population represents approximately 69% of the fluorescence-emitting molecules, has a short fluorescence decay time (0.32 ns) and undergoes Stokes shift of 80 nm. The remaining 31% fraction of DMAC molecules has a decay time of 0.74 ns and undergoes a high (106 nm) Stokes shift. A fraction of the shift, ca. 24 nm for the first and 46 nm for the second population, is attributed to the fast (<0.1 ns) rotational relaxation of nearby dipolar molecules, which might be water. This two-state model accounts well for the detailed fluorescence properties of DMAC in egg PC, i.e. its broadened steady-state spectrum, its average fluorescence quantum yield and its complex wavelength-dependent fluorescence decays.

Fluorescence water sensor based on covalent immobilization of chalcone derivative

A new fluorescence sensor for determining water content in organic solvents has been successfully demonstrated based on a fluorescent dye. 4'-N,N-dimethylamino-4 methylacryloylamino chalcone (DMC), in which the charge donor and acceptor parts were both contained, was copolymerized with acrylamide, hydroxyethyl methacrylate and triethylene glycol dimethacrylate onto glass surface. The fluorescence intensity of DMC decreased with increasing of water content in organic solvents owing to the formation of solvate complexes. DMC fluorescence intensity changed as a linear function of water content in the range of 0-6% in the samples of acetone, ethanol, and acetonitrile solutions. Satisfactory reproducibility, reversibility and a short response time were realized. With the optimum membrane described, detection limits were of 0.006%, 0.008%, and 0.002% for acetone, ethanol, and acetonitrile, respectively. The sensing membrane was found to have a lifetime at least 2 months.

Spectral and photophysical properties of intramolecular charge transfer fluorescence probe: 4'-dimethylamino-2,5-dihydroxychalcone

The spectral and photophysical properties of a new intramolecular charge transfer (ICT) probe, namely 4'-dimethylamino-2,5-dihydroxychalcone (DMADHC) were studied in different solvents by using steady-state absorption and emission spectroscopy. Whereas the absorption spectrum undergoes minor change with increasing polarity of the solvents, the fluorescence spectrum experiences a distinct bathochromic shift in the band position and the fluorescence quantum yield increases reaching a maximum before decrease with increasing the solvent polarity. The magnitude of change in the dipole moment was calculated based on the Lippert-Mataga equation. These results give the evidence about the intramolecular charge transfer character in the emitting singlet state of this compound.

Studies on interaction of an intramolecular charge transfer fluorescence probe: 4′-Dimethylamino-2,5-dihydroxychalcone with DNA

The interaction of a new intramolecular charge transfer probe, namely 4'-dimethylamino-2,5-dihydroxychalcone (DMADHC), with calf thymus DNA has been studied. Compared to the spectral characteristics of the free form in aqueous solution, the fluorescence of DMADHC enhanced dramatically accompanying a blueshift of the emission maxima in the presence of DNA. The absorption and fluorescence spectra, salt concentration effect, KI quenching, fluorescence polarization, and DNA denaturation experiments were given. These results give evidence that the DMADHC molecule is inserted into the base-stacking domain of the DNA double helix. The intrinsic binding constant and the binding site number were estimated. The analytical characteristics were also given.