Rhodium catalysed hydroformylation of higher alkenes using amphiphilic ligands

Ethene Hydroformylation Catalyzed by Rhodium Dispersed with Zinc or Cobalt in Silanol Nests of Dealuminated Zeolite Beta

Catalysts for hydroformylation of ethene were prepared by grafting Rh into nests of ≡SiOZn-OH or ≡SiOCo-OH species prepared in dealuminated BEA zeolite. X-ray absorption spectra and infrared spectra of adsorbed CO were used to characterize the dispersion of Rh. The Rh dispersion was found to increase markedly with increasing M/Rh (M = Zn or Co) ratio; further increases in Rh dispersion occurred upon use for ethene hydroformylation catalysis. The turnover frequency for ethene hydroformylation measured for a fixed set of reaction conditions increased with the fraction of atomically dispersed Rh. The ethene hydroformylation activity is 15.5-fold higher for M = Co than for M = Zn, whereas the propanal selectivity is slightly greater for the latter catalyst. The activity of the Co-containing catalyst exceeds that of all previously reported Rh-containing bimetallic catalysts. The rates of ethene hydroformylation and ethene hydrogenation exhibit positive reaction orders in ethene and hydrogen but negative orders in carbon monoxide. In situ IR spectroscopy and the kinetics of the catalytic reactions suggest that ethene hydroformylation is mainly catalyzed by atomically dispersed Rh that is influenced by Rh-M interactions, whereas ethene hydrogenation is mainly catalyzed by Rh nanoclusters. In situ IR spectroscopy also indicates that the ethene hydroformylation is rate limited by formation of propionyl groups and by their hydrogenation, a conclusion supported by the measured H/D kinetic isotope effect. This study presents a novel method for creating highly active Rh-containing bimetallic sites for ethene hydroformylation and provides new insights into the mechanism and kinetics of this process.

Preparation of carboxylic arylphosphines by hydrolysis of the trifluoromethyl group

Triarylphosphines substituted with carboxylic and trifluoromethlyl groups have been prepared by the hydrolysis of trifluoromethyl groups using fuming sulfuric acid and boric acid. The reaction has been studied in a set of homoleptic and heteroleptic trifluoromethylated triarylphosphines and offers a new synthetic procedure for the preparation of carboxylic phosphines with a relatively simple methodology. The degree of carboxylation is modulated by the reaction conditions and is sensitive to the substitution pattern of the starting trifluoromethylated phosphines. A pH-dependent procedure based on the amphiphilic character of these phosphines was developed for their separation and purification. The electronic properties of the synthesized carboxylic-trifluoromethylated phosphines have been analyzed by ³¹P NMR of the corresponding selenide derivatives. Finally, the structures of two palladium complexes, containing the para and meta carboxylic-trifluoromethylated phosphines are also described, showing different dimeric structures.

Catalytic and biophysical investigation of rhodium hydroformylase

Rh-Containing artificial metalloenzymes based on two mutants of sterol carrier protein_2L (SCP_2L) have been shown to act as hydroformylases, exhibiting significant activity and unexpectedly high selectivity in the hydroformylation of alkenes.

Rhodium-calix[4]pyrrole and rhodium-tetraphenyl porphyrin: preparation, surface grafting and their catalytic application in nitro-benzene reduction

Rhodium containing macromolecules calix[4]pyrrole (RhCP) and tetraphenyl porphyrin (RhTPP) were prepared, grafted on functionalized SBA-15 and demonstrated as promising catalysts for nitro-arene reduction.

Recoverable and recyclable water-soluble sulphonated salicylaldimine Rh(i) complexes for 1-octene hydroformylation in aqueous biphasic media

A series of water-soluble Rh(i) mononuclear complexes of general formula: [Rh(sulphsal-X-R)(COD)] [sulphsal = sulphonated salicylaldimine, COD = cyclooctadiene; where R = H, Cl, CH₃ and X = H, ^tBu] have been synthesized.

Nonionic Tenside Ligands and its Application in Biphasic Catalysis

This review article mainly surveys our research results of biphasic catalysis with nonionic tenside ligands. Emphasis is given to the synthesis and property of cloud point of the nonionic tenside ligands, the general principles of thermoregulated phase-transfer catalysis (TRPTC) and thermoregulated phase-separable catalysis (TPSC). It also explores the applications of TRPTC and TPSC in the hydroformylation of higher olefins and CO selective reduction of nitroarenes. The introduction of TRPTC to biphasic systemis free from the shortcomings of classical aqueous/organic two-phase catalysis, in which the application scope is restrained by the water solubility of the organic substrate. The biphasic catalysis with nonionic tenside ligands was characterized by homogeneous catalysis coupled with convenient biphasic separation.

Diphosphine capsules for transition-metal encapsulation

Self-assembly and characterization of novel heterodimeric diphosphine capsules formed by multiple ionic interactions and composed of one tetracationic diphosphine ligand and one complementary tetraanionic calix[4]arene are described. Encapsulation of a palladium atom within a diphosphine capsule is achieved successfully by using the metal complex of the tetracationic diphosphine ligand for the assembly process. In this templated approach to metal encapsulation, the transition-metal complex is an integrated part of the capsule with the transition metal located inside the capsule and is not involved in the assembly process. We present two approaches for capsule assembly by mixing solutions of the precharged building blocks in methanol and mixing solutions of the neutral building blocks in methanol. The scope of the diphosphine capsules and the metallodiphosphine capsules is easily extended by applying tetracationic diphosphine ligands with different backbones (ethylene, diphenyl ether, and xanthene) and cationic binding motifs (p-C(6)H(4)-CH(2)-ammonium, m-C(6)H(4)-ammonium, and m-C(6)H(4)-guanidinium). These tetracationic building blocks with different flexibilities and shapes readily associate into capsules with the proper capsular structure, as is indicated by (1)H NMR spectroscopy, 1D NOESY, ESI-MS, and modeling studies.

Organic aqueous tunable solvents (OATS): a vehicle for coupling reactions and separations

In laboratory-based chemical synthesis, the choice of the solvent and the means of product purification are rarely determined by cost or environmental impact considerations. When a reaction is scaled up for industrial applications, however, these choices are critical: the separation of product from the solvent, starting materials, and byproduct usually constitutes 60-80% of the overall cost of a process. In response, researchers have developed solvents and solvent-handling methods to optimize both the reaction and the subsequent separation steps on the manufacturing scale. These include "switchable" solvents, which are designed so that their physical properties can be changed abruptly, as well as "tunable" solvents, wherein the solvent's properties change continuously through the application of an external stimulus. In this Account, we describe the organic aqueous tunable solvent (OATS) system, examining two instructive and successful areas of application of OATS as well as its clear potential for further refinement. OATS systems address the limitations of biphasic processes by optimizing reactions and separations simultaneously. The reaction is performed homogeneously in a miscible aqueous-organic solvent mixture, such as water-tetrahydrofuran (THF). The efficient product separation is conducted heterogeneously by the simple addition of modest pressures of CO(2) (50-60 bar) to the system. Under these conditions, the water-THF phase splits into two relatively immiscible phases: the organic THF phase contains the hydrophobic product, and the aqueous phase contains the hydrophilic catalyst. We take advantage of the unique properties of OATS to develop environmentally benign and cost-competitive processes relevant in industrial applications. Specifically, we describe the use of OATS for optimizing the reaction, separation, design, and recycling of (i) Rh-catalyzed hydroformylation of olefins such as 1-octene and (ii) enzyme-catalyzed hydrolysis of 2-phenylacetate. We discuss the advantages of these OATS systems over more traditional processes. We also consider future directions that can be taken with these proven systems as well as related innovations that have recently been reported, including the use of poly(ethylene glycol) (PEG) as a tunable adjunct in the solvent and the substitution of propane for CO(2) as the external stimulus. OATS systems in fact represent the ultimate goal for a sustainable process, because in an idealized setup there is only reactant coming in and product going out; in principle, there is no waste stream.

Ionic Interaction as a Powerful Driving Force for the Formation of Heterobidentate Assembly Ligands

An ionic interaction has been used for the first time to assemble monophosphane ligands. NMR spectroscopy and X-ray studies show that cationic and anionic triphenylphosphane derivatives form ion pairs and subsequently act as a ligand in various transition-metal complexes. The position of the ionic functional groups allows both cis and trans coordination of the novel assembly ligand in square-planar transition-metal complexes.

Rigid bis-zinc(ii) salphen building blocks for the formation of template-assisted bidentate ligands and their application in catalysis

The template-induced formation of chelating bidentate ligands by the selective self-assembly of two monodentate pyridyl phosphorus ligands on a rigid bis-zinc(II) salphen template with two identical binding sites was studied. Using UV-vis, NMR-spectroscopy and X-ray analysis the formed structures were unambiguously proven. The application of these templated bidentate ligands in transition metal catalysis showed, in most cases, typical bidentate character. Compared to previous work based on a more flexible bis-zinc(II) porphyrin template, the current catalytic data suggest that the rigidity of the template is not an important factor for the improvement of the regio- and enantioselectivity under the applied reaction conditions.

Supramolecular bidentate phosphorus ligands based on bis-zinc(ii) and bis-tin(iv) porphyrin building blocks

Selective metal-ligand interactions have been used to prepare supramolecular bidentate ligands by mixing monodentate ligands with a suitable template. For these assemblies pyridine phosphorus ligands and a zinc(II) porphyrin dimer were used. In the rhodium-catalysed hydroformylation of 1-octene and styrene improved selectivities have been obtained for some of the assembled bidentate ligand systems. In the palladium catalysed asymmetric allylic alkylation similar effects were observed; the enantioselectivity increased by using a bisporphyrin template. The preparation of supramolecular catalyst systems was also explored using tin-oxygen interactions. Dihydroxotin(IV) porphyrin and carboxylic phosphorus ligands assemble into supramolecular ligands and the phosphorus donor atom coordinates to transition metals. The stronger oxygen-tin bond, compared to pyridine-zinc does not result in a better performance of the catalyst.

Neutral and Cationic Complexes with P-Bonded 2-Pyridylphosphines as N-Donor Ligands toward Rhodium. Electrical Charge vs Steric Hindrance on the Conformational Control

Bimetallic palladium(II)-rhodium(I) and gold(I)-rhodium(I) complexes of the type [(4,4'-Me2-bipy)(C6F5)Pd(mu-PPh(3-n)Pyn)Rh(diene)](BF4)2 and [(C6F5)Au(mu-PPh(3-n)Pyn)Rh(diene)](BF4) (n = 2, 3; Py = 2-pyridyl) have been synthesized. The P donor atom of the bridging ligands (mu-PPh(3-n)Pyn) is coordinated to the Pd or to the Au center. The resulting complexes react with [Rh(diolefin)(solv)2]+ (solv = acetone) in a way similar to pyrazolylborates, affording square-planar or pentacoordinated rhodium complexes with two or the three N-donor ends chelating the Rh atom. The metallacycles formed upon chelation can adopt one of two conformations in the square-planar Rh(I) complexes, either bringing the other metal close to the Rh center or bringing it to a remote position. The first conformation is preferred for the gold P-coordinated complexes and the second for the palladium complexes. The X-ray structures of [(4,4'-Me2-bipy)](C6F5)Pd(mu-PPhPy2)Rh(COD)](BF4)2 (COD = 1,5 cyclooctadiene) and [Au(C6F5)(mu-PPhPy2)Rh(TFB)](BF4) (TFB = 5,6,7,8-tetrafuoro-1,4-dihydro-1,4-etenonaphthalene) are reported.

Encapsulated transition metal catalysts comprising peripheral Zn(ii)salen building blocks: template-controlled reactivity and selectivity in hydroformylation catalysis

Encapsulated phosphane ligands can be easily constructed through coordinative interactions between Zn(II)-salphen complexes and pyridylphosphane templates; the template has a pronounced impact on the catalyst structure and consequently on the performance in the hydroformylation of 1-octene.

The electron-poor phosphines P{C6H3(CF3)2-3,5}3 and P(C6F5)3 do not mimic phosphites as ligands for hydroformylation. A comparison of the coordination chemistry of P{C6H3(CF3)2-3,5}3 and P(C6F5)3 and the unexpectedly low hydroformylation activity of their rhodium complexes

The fluoroaryl phosphines P{C6H3(CF3)2-3,5}3 (La) and P(C6F5)3 (Lb) form the complexes trans-[MCl2(La)2] and trans-[MCl2(Lb)2](M = Pd or Pt) which have been isolated and fully characterised. 31P NMR studies of competition experiments show that the stability of trans-[PdCl2L2] is in the order L = Lb< La <PPh3. The crystal structure of trans-[PtCl2(La)2] is reported and reveals that the Pt-P bond lengths in trans-[PtCl2L2] are in the order L = Lb< La < PPh3. The equilibria established when [Pt(norbornene)3] is treated with or are investigated by 31P and 195Pt NMR spectroscopy and the species [PtLn(norbornene)3-n](n= 1-3) identified. Ligands and appear to have similar affinities for platinum(0). The complexes trans-[MCl(CO)(La)2] and trans-[MCl(CO)(Lb)2](M = Rh or Ir) have been synthesised and fully characterised; the values of nu(CO) are comparable with those for analogous phosphite complexes. The ligands La, Lb, P(C6H2F3-3,4,5)3 (Lc), P{C6H4(CF3)-2}3 (Ld), PPh3 and P(OPh)3 have been tested in rhodium-catalysed hydroformylation of 1-hexene and La, Lb, and PPh3 have been tested in rhodium-catalysed hydroformylation of 4-methoxystyrene. Ligands La, and Lb, have been shown to be stable under the hydroformylation catalysis conditions. For the 1-hexene reaction, the activity and selectivity for and are very similar to the PPh3 catalyst (TOF ca. 400 h(-1); n : iso 2.5-3.0) but for the sterically demanding and the activity and selectivity was much lower than with PPh3 (TOF ca. 15, n : iso ratio 0.6). Thus, the yield of heptanals obtained with the catalyst derived from La is 94% while under the same conditions with Lb only 6%. The TOF for the La/Rh catalyst was 5 times lower than for the P(OPh)3/Rh catalyst despite the superficially similar ligand electronic characteristics for La and P(OPh)3.

Encapsulation of Transition Metal Catalysts by Ligand-Template Directed Assembly

Encapsulated transition metal catalysts are presented that are formed by templated self-assembly processes of simple building blocks such as porphyrins and pyridylphosphine and phosphite ligands, using selective metal-ligand interactions. These ligand assemblies coordinate to transition metals, leading to a new class of transition metal catalysts. The assembled catalyst systems were characterized using NMR and UV-vis spectroscopy and were identified under catalytic conditions using high-pressure infrared spectroscopy. Tris-3-pyridylphosphine binds three mesophenyl zinc(II) porphyrin units and consequently forms an assembly with the phosphorus donor atom completely encapsulated. The encapsulated phosphines lead exclusively to monoligated transition metal complexes, and in the rhodium-catalyzed hydroformylation of 1-octene the encapsulation of the catalysts resulted in a 10-fold increase in activity. In addition, the branched aldehyde was formed preferentially (l/b = 0.6), a selectivity that is highly unusual for this substrate, which is attributed to the encapsulation of the transition metal catalysts. An encapsulated rhodium catalyst based on ruthenium(II) porphyrins and tris-meta-pyridyl phosphine resulted in an even larger selectivity for the branched product (l/b = 0.4). These encapsulated catalysts can be prepared easily, and various template ligands and porphyrins, such as tris-3-pyridyl phosphite and ruthenium(II) porphyrins, have been explored, leading to catalysts with different properties.

Anionic Platinum Complexes with 2-Pyridylphosphines as Ligands for Rhodium: Synthesis of Zwitterionic Pt−Rh Organometallic Compounds

Bimetallic zwitterionic platinum(II)-rhodium(I) complexes of the type [(C(6)F(5))(3)Pt(micro-PPy(n)Ph(3)(-)(n)Rh(CO)(2))] and [(C(6)F(5))(3)Pt(micro-PPy(n)Ph(3)(-)(n)())Rh(diene))] (n = 2, 3; Py = 2-pyridyl) have been prepared. The P end of the bridging ligands (micro-PPy(n)Ph(3)(-)(n)) is always coordinated to the Pt center, while the N-donor ends chelate the Rh atom, giving metallacycles comparable to pyrazolylborate-Rh complexes. These metallacycles can adopt two conformations, either with the Pt complex in pseudoaxial position approaching the Rh center or with the Pt complex in a remote position. The preferred conformation depends on the steric hindrance at the rhodium center. In less sterically demanding Rh-carbonyl complexes the Pt moiety gets close to the Rh moiety as this brings closer the opposite charges of the zwitterion. For diene complexes mixtures of conformers are obtained. The X-ray structures of [(C(6)F(5))(3)Pt(micro-PPhPy(2))Rh(COD)] (COD = 1,5-cyclooctadiene) and [(C(6)F(5))(3)Pt(micro-PPhPy(2))Rh(CO)(2)] are reported.