Spectrophotometric and fluorometric assay of superoxide ion using 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole

Ex Tenebris Lux: Illuminating Reactive Oxygen and Nitrogen Species with Small Molecule Probes

Reactive oxygen and nitrogen species are small reactive molecules derived from elements in the air─oxygen and nitrogen. They are produced in biological systems to mediate fundamental aspects of cellular signaling but must be very tightly balanced to prevent indiscriminate damage to biological molecules. Small molecule probes can transmute the specific nature of each reactive oxygen and nitrogen species into an observable luminescent signal (or even an acoustic wave) to offer sensitive and selective imaging in living cells and whole animals. This review focuses specifically on small molecule probes for superoxide, hydrogen peroxide, hypochlorite, nitric oxide, and peroxynitrite that provide a luminescent or photoacoustic signal. Important background information on general photophysical phenomena, common probe designs, mechanisms, and imaging modalities will be provided, and then, probes for each analyte will be thoroughly evaluated. A discussion of the successes of the field will be presented, followed by recommendations for improvement and a future outlook of emerging trends. Our objectives are to provide an informative, useful, and thorough field guide to small molecule probes for reactive oxygen and nitrogen species as well as important context to compare the ecosystem of chemistries and molecular scaffolds that has manifested within the field.

A comparative evaluation of biochar and Paenarthrobacter sp. AT5 for reducing atrazine risks to soybeans and bacterial communities in black soil

Application of biochar and inoculation with specific microbial strains offer promising approaches for addressing atrazine contamination in agricultural soils. However, determining the optimal method necessitates a comprehensive understanding of their effects under similar conditions. This study aimed to evaluate the effectiveness of biochar and Paenarthrobacter sp. AT5, a bacterial strain known for its ability to degrade atrazine, in reducing atrazine-related risks to soybean crops and influencing bacterial communities. Both biochar and strain AT5 significantly improved atrazine degradation in both planted and unplanted soils, with the most substantial reduction observed in soils treated with strain AT5. Furthermore, bioaugmentation with strain AT5 outperformed biochar in enhancing soybean growth, photosynthetic pigments, and antioxidant defenses. While biochar promoted higher soil bacterial diversity compared to strain AT5, the latter selectively enriched specific bacterial populations. Additionally, soil inoculated with strain AT5 displayed a notable increase in the abundance of key genes associated with atrazine degradation (trzN, atzB, and atzC), surpassing the effects observed with biochar addition, thus highlighting its effectiveness in mitigating atrazine risks in soil.

Citric acid-induced photochemical behavior of Cr(III)-substituted ferrihydrite: Fe and Cr release, mineral transformation and reactive oxygen species generation

Cr(III)-substituted ferrihydrite (Fh-Cr(III)) is widespread in the surrounding environment of mining areas. Fh-Cr(III) is unstable and susceptible to the influence of environmental factors, such as dissolved organic matter (DOM) and light, so Cr species embedded in mineral crystal layers are likely to have more profound negative effects on the environment with the photochemical behaviors of minerals. However, the photochemical behaviors of Fh-Cr(III) in the presence of DOM remains poorly understood. For this reason, citric acid (CA) was chosen as the representative DOM to study its combined effects with visible light irradiation on Fh-Cr(III) dissolution and phase transition. The results showed that CA hindered the agglomeration of Fh-Cr(III) particles, thereby slowing the phase transition of Fh-Cr(III). However, CA exacerbated the release of Fe and Cr by maintaining Fh-Cr(III) under unstable crystal structure. Moreover, due to the occurrence of ligand-metal charge transfer (LMCT) in (CA)n-Fh-Cr(III) formed on the Fh-Cr(III) surface, the synergistic effect between CA and light irradiation greatly promoted the dissolution of Fh-Cr(III). In the mixed system of Fh-Cr(III) (3 g/L) and CA (5 mM) at initial pH 3.0, the maximum concentrations of TFe and TCr were 18.17 and 5.68 mg/L after 6 h of light reaction, which were 1.82 and 3.62 times of those in the corresponding system in the darkness. Meanwhile, the Fe(III)/Fe(II) cycling in solution and solid surfaces was affected by various reactive oxygen species (ROS) generated from the LMCT process, in which the photoproduced Fe(II) further accelerated Cr(III) dissolution under acidic solution. The fast release of Cr(III) may pose greater danger to the environment as the more toxic Cr(VI) can be easily formed through the oxidation of dissolved Cr(III). This work offers fresh insights into the migration and transformation of Cr elements in the natural environment.

Evaluation of visible light and natural photosensitizers against Staphylococcus epidermidis and Staphylococcus saprophyticus planktonic cells and biofilm

Antimicrobial photoinactivation (API) has shown some promise in potentially treating different nosocomial bacterial infections, however, its application on staphylococci, especially other than Staphylococcus aureus or methicillin-resistant S. aureus (MRSA) species is still limited. Although S. aureus is a well-known and important nosocomial pathogen, several other species of the genus, particularly coagulase-negative Staphylococcus (CNS) species such as Staphylococcus epidermidis and Staphylococcus saprophyticus, can also cause healthcare-associated infections and foodborne intoxications. CNS are often involved in resilient biofilm formation on medical devices and can cause infections in patients with compromised immune systems or those undergoing invasive procedures. In this study, the effects of chlorophyllin and riboflavin-mediated API on S. epidermidis and S. saprophyticus planktonic cells and biofilm are demonstrated for the first time. Based on the residual growth determination and metabolic reduction ability changes, higher inactivating efficiency of chlorophyllin-mediated API was determined against the planktonic cells of both tested species of bacteria and against S. saprophyticus biofilm. Some insights on whether aqueous solutions of riboflavin and chlorophyllin, when illuminated with optimal exciting wavelength (440 nm and 402 nm, respectively) generate O2-•, are also provided in this work.

Advances in xanthine biosensors and sensors: A review

Xanthine is derived from hypoxanthine by xanthine oxidase (XOD), a flavoprotein containing molybdenum and non-haem iron, sulfur and from guanine by guanine deaminase enzyme. Xanthine is oxidized into uric acid by XOD. Xanthine is used as an indicator of fish freshness, based on the reactions in which ATP is degraded into xanthine and its quantity increases with time of fish death. Fresh fish meat is required in food industry for making high quality items. The determination of xanthine in biological fluids is also used in diagnosing and curing many diseases like renal failure, gout, xanthinuria, hyperuricemia. Various methods are available for detection of xanthine but most of them are complicated, time consuming less sensitive & specific and require expensive instrumental setup and trained person to operate. Enzyme based biosensors and non enzymic sensors overcome these disadvantages, as these are simple, rapid, specific, sensitive and easy to operate. Present review describes xanthine biosensors, which work optimally between pH 3.5-9.0, temperature 25 °C-65 °C, xanthine concentration ranging from 0.001-50 × 104 µM. These biosensors have also been used to measure xanthine concentration in beverages, urine and serum samples. Various modified electrodes have been discussed for the detection of xanthine using both enzymatic and non-enzymatic approaches in the present review.

Revealing the generation of reactive oxygen species in hydrochar and pyrochar: Insight into rational regulation of free radicals and catalytic mechanism

The removal of organic pollutants by biochar has been extensively studied. However, the differences in the removal mechanisms of contaminants by biochar obtained from different preparation techniques have not been thoroughly elucidated. In this study, the catalytic performances of hydrochar (HC) and pyrochar (PC) were compared in the dark and light. Owing to more persistent free radicals (PFRs), greater defects and stronger charge transfer ability on the surface, PC could produce a certain concentration of superoxide radicals (•O2-) even in the dark, making its degradation efficiency for benzoic acid (BA) 11% higher than that of HC. On the contrary, when the light was turned on, HC rather than PC can generate a higher amount of hydroxyl radical (•OH), resulting in an 11% higher degradation efficiency of BA compared to PC. The improvement of catalytic performance in HC originated from its oxygen-containing functional groups (OFGs), which was beneficial for its effective production of singlet oxygen (1O2) and ·OH under light exposure. For PC, its photocatalytic activity depended mainly on the formation of 1O2 induced by the triplet of DOM (dissolved organic matter), but the lack of oxidative ·OH in its system leads to a lower degradation efficiency than that of HC. To prove the universal applicability of this rule for biochar materials, HC and PC materials obtained from soybean residue were also prepared for degrading BA. This work is devoted to an in-depth exploration of the catalytic activation mechanism of biochar obtained by different technological methods, and can create conditions for the generation of more dominant reactive oxygen species (ROS) on biochar, thus providing the guidance for environmental remediation.

Unveiling Xanthine Presence in Rohu Fish Using Ag+-Doped MoS2 Nanosheets Through Electrochemical Analysis

Here, we envisage the development of the rapid, reliable, and facile electrochemical sensor for the primary detection of xanthine (Xn) which is significant for the food quality measurement, based on the silver-doped molybdenum disulfide (Ag@MoS2) nanosheets. The structural and compositional properties of the prepared samples were tested through X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and X-ray photon spectroscopy (XPS). The two-dimensional (2D) MoS2 nanosheets provide the large surface area for the sensing applications and the silver ions help in the enhanced electrochemical response. The fabricated enzymatic biosensor exhibits magnificent cyclic stability with a limit of detection of 27 nM. Also, the sensor was tested for rapid, reproducible, specific, and regenerable up to 10 cycles and has a shelf life of 2 weeks. The outcomes of this study suggest that the proposed matrix could be employed for the fabrication of devices for early detection of xanthine.

Superoxide-Mediated Extracellular Mercury Reduction by Aerobic Marine Bacterium Alteromonas sp. KD01

Microbial reduction plays a crucial role in Hg redox and the global cycle. Although intracellular Hg(II) reduction mediated by MerA protein is well documented, it is still unclear whether or how bacteria reduce Hg(II) extracellularly without its internalization. Herein, for the first time, we discovered the extracellular reduction of Hg(II) by a widely distributed aerobic marine bacterium Alteromonas sp. KD01 through a superoxide-dependent mechanism. The generation of superoxide by Alteromonas sp. KD01 was determined using 3-bis(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide and methyl cypridina luciferin analogue as probes via UV-vis and chemiluminescence detection, respectively. The results demonstrated that Hg(II) reduction was inhibited by superoxide scavengers (superoxide dismutase (SOD) and Cu(NO3)2) or inhibitors of reduced nicotinamide adenine dinucleotide (NADH) oxidoreductases. In contrast, the addition of NADH significantly improved superoxide generation and, in turn, Hg(II) reduction. Direct evidence of superoxide-mediated Hg(II) reduction was provided by the addition of superoxide using KO2 in deionized water and seawater. Moreover, we observed that even superoxide at an environmental concentration of 9.6 ± 0.5 nM from Alteromonas sp. KD01 (5.4 × 106 cells mL-1) was capable of significantly reducing Hg(II). Our findings provide a greater understanding of Hg(II) reduction by superoxide from heterotrophic bacteria and eukaryotic phytoplankton in diverse aerobic environments, including surface water, sediment, and soil.

Ligand Control of Dinitrosyl Iron Complexes for Selective Superoxide-Mediated Nitric Oxide Monooxygenation and Superoxide-Dioxygen Interconversion

Through nitrosylation of [Fe-S] proteins, or the chelatable iron pool, a dinitrosyl iron unit (DNIU) [Fe(NO)2] embedded in the form of low-molecular-weight/protein-bound dinitrosyl iron complexes (DNICs) was discovered as a metallocofactor assembled under inflammatory conditions with elevated levels of nitric oxide (NO) and superoxide (O2-). In an attempt to gain biomimetic insights into the unexplored transformations of the DNIU under inflammation, we investigated the reactivity toward O2- by a series of DNICs [(NO)2Fe(μ-MePyr)2Fe(NO)2] (1) and [(NO)2Fe(μ-SEt)2Fe(NO)2] (3). During the superoxide-induced conversion of DNIC 1 into DNIC [(K-18-crown-6-ether)2(NO2)][Fe(μ-MePyr)4(μ-O)2(Fe(NO)2)4] (2-K-crown) and a [Fe3+(MePyr)x(NO2)y(O)z]n adduct, stoichiometric NO monooxygenation yielding NO2- occurs without the transient formation of peroxynitrite-derived •OH/•NO2 species. To study the isoelectronic reaction of O2(g) and one-electron-reduced DNIC 1, a DNIC featuring an electronically localized {Fe(NO)2}9-{Fe(NO)2}10 electronic structure, [K-18-crown-6-ether][(NO)2Fe(μ-MePyr)2Fe(NO)2] (1-red), was successfully synthesized and characterized. Oxygenation of DNIC 1-red leads to the similar assembly of DNIC 2-K-crown, of which the electronic structure is best described as paramagnetic with weak antiferromagnetic coupling among the four S = 1/2 {FeIII(NO-)2}9 units and S = 5/2 Fe3+ center. In contrast to DNICs 1 and 1-red, DNICs 3 and [K-18-crown-6-ether][(NO)2Fe(μ-SEt)2Fe(NO)2] (3-red) display a reversible equilibrium of "3 + O2- ⇋ 3-red + O2(g)", which is ascribed to the covalent [Fe(μ-SEt)2Fe] core and redox-active [Fe(NO)2] unit. Based on this study, the supporting/bridging ligands in dinuclear DNIC 1/3 (or 1-red/3-red) control the selective monooxygenation of NO and redox interconversion between O2- and O2 during reaction with O2- (or O2).

Novel Enzymatic Biosensor Utilizing a MoS2/MoO3 Nanohybrid for the Electrochemical Detection of Xanthine in Fish Meat

A rapid, reliable, and user-friendly electrochemical sensor was developed for the detection of xanthine (Xn), an important biomarker of food quality. The developed sensor is based on a nanocomposite comprised of molybdenum disulfide-molybdenum trioxide (MoS2/MoO3) and synthesized using a single-pot hydrothermal method. Structural analysis of the MoS2/MoO3 nanocomposite was conducted using X-ray diffraction (XRD) and Raman spectroscopy, while its compositional properties were evaluated through X-ray photoelectron spectroscopy (XPS). Morphological features were observed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Two-dimensional (2D) MoS2 offers advantages such as a high surface-to-volume ratio, biocompatibility, and strong light-matter interaction, whereas MoO3 serves as an effective electron transfer mediator and exhibits excellent stability in aqueous environments. The enzymatic biosensor derived from this nanocomposite demonstrates remarkable cyclic stability and a low limit of detection of 64 nM. It enables rapid, reproducible, specific, and reproducible detection over 10 cycles while maintaining a shelf life of more than 5 weeks. These findings highlight the potential of our proposed approach for the development of early detection devices for Xn.

Iron/iron oxide-based magneto-electrochemical sensors/biosensors for ensuring food safety: recent progress and challenges in environmental protection

Foodborne diseases have arisen due to the globalization of industry and the increase in urban population, which has led to increased demand for food and has ultimately endangered the quality of food. Foodborne diseases have caused some of the most common public health problems and led to significant social and economic issues worldwide. Food quality and safety are affected by microbial contaminants, growth-promoting feed additives (β-agonists and antibiotics), food allergens, and toxins in different stages from harvesting to storage and marketing of products. Electrochemical biosensors, due to their reduced size and portability, low cost, and low consumption of reagents and samples, can quickly provide valuable quantitative and qualitative information about food contamination. In this regard, using nanomaterials can increase the sensitivity of the assessment. Magnetic nanoparticle (MNP)-based biosensors, especially, are receiving significant attention due to their low-cost production, physicochemical stability, biocompatibility, and eco-friendly catalytic characteristics, along with magnetic, biological, chemical and electronic sensing features. Here, we provide a review on the application of iron-based magnetic nanoparticles in the electrochemical sensing of food contamination. The types of nanomaterials used in order to improve the methods and increase the sensitivity of the methods have been discussed. Then, we stated the advantages and limitations of each method and tried to state the research gaps for each platform/method. Finally, the role of microfluidic and smartphone-based methods in the rapid detection of food contamination is stated. Then, various techniques like label-free and labelled regimes for the sensitive monitoring of food contamination were surveyed. Next, the critical role of antibody, aptamer, peptide, enzyme, DNA, cells and so on for the construction of specific bioreceptors for individual and simultaneous recognition by electrochemical methods for food contamination were discussed. Finally, integration of novel technologies such as microfluidic and smartphones for the identification of food contaminations were investigated. It is important to point out that, in the last part of each sub-section, attained results of different reports for each strategy were compared and advantages/limitations were mentioned.

Superoxide Anion Chemistry-Its Role at the Core of the Innate Immunity

Classically, superoxide anion O₂^•- and reactive oxygen species ROS play a dual role. At the physiological balance level, they are a by-product of O₂ reduction, necessary for cell signalling, and at the pathological level they are considered harmful, as they can induce disease and apoptosis, necrosis, ferroptosis, pyroptosis and autophagic cell death. This revision focuses on understanding the main characteristics of the superoxide O₂^•-, its generation pathways, the biomolecules it oxidizes and how it may contribute to their modification and toxicity. The role of superoxide dismutase, the enzyme responsible for the removal of most of the superoxide produced in living organisms, is studied. At the same time, the toxicity induced by superoxide and derived radicals is beneficial in the oxidative death of microbial pathogens, which are subsequently engulfed by specialized immune cells, such as neutrophils or macrophages, during the activation of innate immunity. Ultimately, this review describes in some depth the chemistry related to O₂^•- and how it is harnessed by the innate immune system to produce lysis of microbial agents.

Challenges and pitfalls in the investigation of the catalytic ozonation mechanism: A critical review

Catalytic ozonation is a promising technology for pollutant abatement in water and wastewater treatment. However, there are many controversies and contradictions regarding the mechanisms of catalytic ozonation in literature, which has seriously confounded the development of the technology towards industrial applications. Herein, a critical review of literature is conducted to reveal possible underlying causes of the controversies and contradictions, and several common pitfalls in the experimental design and data interpretation are identified, e.g., the fundamentally flawed quenching method popularly used for evaluating the role of reactive oxygen species for pollutant abatement in catalytic ozonation and the neglect of monitoring ozone transfer doses in lab-scale experiments. Based on the identified pitfalls, several measures are suggested to improve the experimental design and data interpretation of catalytic ozonation studies. In addition, recent advances in mechanistic understanding of catalytic ozonation by principle-based modelling approaches are described. Finally, additional works that are needed to shrink the gap between academic research and practical applications and the prospect of catalytic ozonation in future water and wastewater treatment systems are analyzed.

Electro-peroxone with solid polymer electrolytes: A novel system for degradation of plasticizers in natural effluents

Electro-peroxone (EP) reaction has been considered as a promising process for real effluent treatments. However, the use of the technology in natural water conditions is limited by low electrical conductivity and high operating costs. Herein, a novel electrochemical system was designed to overcome this constrain by coupling EP with a solid polymer electrolyte (EP-SPE). Performances of EP-SPE system were thoroughly evaluated by comparing the decomposition and energy efficiencies of various plasticizers in different systems. The EP-SPE system achieved 50% of pollutants mineralization in only 10 min with the electrolysis energy consumption of 1.0kWh·m^-3, While the conventional EP system (not) adding salt compounds (CEP-(N) AS) need 30 (60) min to reach 50% of pollutants mineralization with 3.8(26.6)kWh·m^-3. Kinetics and mechanisms of EP-SPE were investigated in detail, while electronic paramagnetic resonance (EPR) detection and kinetic model revealed the occurrence, transient concentration and degradation contribution of reactive oxidizing species (ROS). Furthermore, tests of variety of SPEs and natural waters demonstrated universal applicability of EP-SPE. Additionally, EP-SPE did not show any performance deterioration after 15 runs. Therefore, this work provides a feasible technology for plasticizer purification in natural water.

Can the commonly used quenching method really evaluate the role of reactive oxygen species in pollutant abatement during catalytic ozonation?

Reactive oxygen species (ROS) such as hydroxyl radicals (•OH), superoxide radicals (O₂^•-), and singlet oxygen (¹O₂) have often been suggested to play a role in ozone-resistant pollutant abatement during catalytic ozonation. However, there are significant controversies regarding their relative importance in literature. Currently, the role of ROS in pollutant abatement is commonly evaluated by the quenching method based on the assumption that the added ROS quenchers (e.g., tert-butanol (TBA) and para-benzoquinone (pBQ)) quench only the target ROS, but do not considerably influence other reaction mechanisms of catalytic ozonation. However, we hypothesized that this assumption is possibly unrealistic and a main cause for the controversies reported in literature. To test this hypothesis, this study evaluated the effects of six commonly used ROS quenchers (TBA, pBQ, methanol (MeOH), 4-chloro-7-nitrobenzo-2-oxa-1,3-dizole (NBD-Cl), furfuryl alcohol (FFA), and sodium azide (NaN₃)) on the mechanism of catalytic ozonation with manganese dioxide. The results show that rather than only quenching their target ROS, these quenchers can profoundly change the catalytic ozonation system through various mechanisms, e.g., interrupting the radical chain reaction of O₃ decomposition, blocking the active sites of catalysts, and consuming O₃ in the system. Due to the significant confounding effects of ROS quenchers on the reaction mechanism, the quenching method actually cannot reveal the role of ROS in pollutant abatement and often misinterpreted the catalytic ozonation mechanism. The results indicate that the commonly used quenching method is probably not an appropriate way to investigate the role of ROS in pollutant abatement during catalytic ozonation, and many previously reported mechanisms obtained with the quenching method may need a revisit.

Gallic acid-coated silver nanoparticles as perspective drug nanocarriers: bioanalytical study

The ability of silver nanoparticles (AgNPs) to be used as drug nanocarriers has helped rapidly to invent novel strategies to treat diseases, such as cancer. The nanoparticles may offer a valuable tool to novel pH-sensitive drug delivery systems in the present scenario because of their undergoing mechanisms associated with the regulated dissolution, aggregation, and generation of oxygen radicals as well. These processes could be monitored by electrochemical (bio)sensors that are less money and time-consuming compared to other analytical approaches, however, with comparable analytical performance. In this paper, synthesized and microscopically characterized gallic acid-coated AgNPs (GA-AgNPs) are investigated using spectral and electrochemical methods. To investigate the Ag⁺ release, a 21-day ageing experiment is performed spectrophotometrically, finding that the peak maximum of GA-AgNPs spectra diminished by 24.5%. The highest Ag⁺ content was electrochemically determined in the supernatant solution after centrifugation (6.97 μmol·L^-1), while no significant concentration of silver ions in solution after redispersion was observed (1.26 μmol·L^-1). The interaction experiment indicates a stabilization of GA-AgNPs in the presence of long-chain dsDNA as well as a mutual electrostatic interaction with DNA sugar-phosphate backbone. This interaction mechanism is confirmed by FTIR analysis, showing a shift (1049 to 1061 cm^-1 and 913 to 964 cm^-1) specific to DNA phosphate bands. Finally, doxorubicin-loaded GA-AgNPs are monitored for the specific drug release in the physiological and more reactive weakly acidic microenvironment. Hereby, electrochemical (bio)sensing of GA-AgNPs undergoing mechanisms shows a huge potential to be used for monitoring of drug delivery systems at cancer therapy.

An interference-free new xanthine biosensor based on immobilized enzyme-nanogold conjugate on carbon nanotube doped poly(3,4-Ethylenedioxythiophene) composite film

A new design of biosensor based on polymeric nano(bio)composite has been proposed for the selective detection of xanthine to be used in the clinical analysis as well as food quality control. The xanthine oxidoreductase (XOR) gene ofPseudomonas aerogenosastrain CEBP1 wascloned to obtainpurifiedenzyme through affinity chromatography. fMWCNTdoped PEDOTwas electrodeposited on the working electrodeto enhance the sensitivity and selectivity of the biosensor. Bio-synthesized gold nanoparticles conjugated XOR (Au-XOR) was covalently immobilized on the polymeric nanocomposite. The enzymatic activity was enhanced 1.12 times with increased substrate affinity. The surface morphology and structural properties of the polymeric layer were investigated using SEM, FESEM, TEM. Electrochemical characteristics were performed by cyclic voltammetry, differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy. Xanthine was oxidized (pH 7.0) on the uniquely designed polymeric nano(bio)composite modified electrode at a lower anodic potential of + 0.446 V vs. Ag/AgCl (3 M NaCl)at optimized DPV conditions. The simple, newly designed Au-XOR/fMWCNT-PEDOT/GCE exhibited interference-free reproducibility and stability (∼4 months) with excellent sensitivity of 16.075 µA.µM^-1.cm^-2for the quantification of xanthine in biological samples such as blood, tissue, urine. The applicability of thebiosensor was validatedby comparing the sensing results for the real biological fluidic solutions with HPLC data (RE = 0.5-3.1%).

The efficient degradation of sulfisoxazole by singlet oxygen (1O2) derived from activated peroxymonosulfate (PMS) with Co3O4-SnO2/RSBC

Co₃O₄-SnO₂/rice straw biochar (RSBC) was prepared for the first time via calcining oxalate precipitation precursor dispersed on the surface of RSBC and used as a catalyst for activating PMS to degrade sulfisoxazole (SIZ). The results demonstrated that Co₃O₄-SnO₂/RSBC possessed much better catalytic performance than Co₃O₄, Co₃O₄-SnO₂, Co₃O₄/RSBC, and SnO₂/RSBC, which is ascribed to the synergy of Co₃O₄, SnO₂ and RSBC. Approximately 98% of SIZ (50 mg/L) was decomposed by PMS (1 mmol/L) activated with Co₃O₄-SnO₂/RSBC (0.1 g/L) within 5 min. The optimal degradation efficiency of SIZ was realized at the initial pH 9. Co₃O₄-SnO₂/RSBC also displayed remarkable stability and reusability, and the degradation rate of SIZ maintained over 90% even after the fifth recycle run. The electron paramagnetic resonance (EPR) technique and quenching experiments proved singlet oxygen (¹O₂) to be the main reactive oxygen species (ROS) responsible for the SIZ decomposition in the Co₃O₄-SnO₂/RSBC/PMS system. On the basis of the characterization analysis, the identification of the ROS and the SIZ degradation products, the possible mechanism and pathways of the SIZ degradation by a combination of PMS and Co₃O₄-SnO₂/RSBC were further proposed. This study provides not only a new insight into non-radical mechanism for the heterogeneous activating PMS over Co₃O₄-SnO₂/RSBC to degrade organic pollutants but also an eco-friendly synthetic route for exploring novel and efficient catalysts.

A simple electrochemical approach to fabricate functionalized MWCNT-nanogold decorated PEDOT nanohybrid for simultaneous quantification of uric acid, xanthine and hypoxanthine

Medical diagnostics and detection of food spoilage require estimation of hypoxanthine (HX), xanthine (XN), and uric acid (UA). A selective sensing platform has been proposed for simultaneous detection of all these species. Functionalized multi-walled carbon nanotube (fMWCNT) stabilized nanogold decorated PEDOT:TOS polymeric nanocomposite (Au-PEDOT-fMWCNT) was synthesized through rapid one-step electropolymerization to enhance conductivity and active surface area by several folds. Electrochemical activities of the proposed sensing platform were analyzed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS). Analyses through SEM, FESEM and TEM were performed to explore the surface morphology and elemental analysis of the polymeric nanohybrid was investigated by XPS, Raman, FTIR, XRD spectroscopy. Electro-catalysis of UA, XN and HX occurred at low oxidation potentials i.e. 0.082, 0.463 and 0.808 V, respectively in the optimized conditions. The uniquely designed simple, interference free Au-PEDOT-fMWCNT/GCE sensor exhibited high selectivity, good reproducibility, reusability (∼180 times) and stability (∼3 month) with excellent sensitivity of 1.73, 14.31 and 3.82 μA μM^-1 cm^-2 for UA, XN and HX, respectively. The sensor exhibited linear ranges of detection as 0.1-800, 0.05-175 and 0.1-150 μM with detection limits of 199.3, 24.1 and 90.5 nM for quantification of UA, XN and HX respectively. The performance of the proposed sensor was validated by addition of UA, XN and HX in human serum, urine and fish samples by comparing to those using HPLC. The results indicated good applicability of the proposed sensor for simultaneous detection of UA, XN, HX in real biological fluids.

A strong hydrangea-like Au–TiO2 catalyst for round-the-clock degradation of oxalic acid in the presence of ozone

We report a strong hydrangea-like Au–TiO₂ catalyst for round-the-clock degradation of oxalic acid by either photocatalytic ozonation or catalytic ozonation.

Detection of xanthine in food samples with an electrochemical biosensor based on PEDOT:PSS and functionalized gold nanoparticles

An innovative biosensor assembly relying on glassy carbon electrodes modified with nanocomposites consisting of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) as a host matrix with functionalized gold nanoparticles (GCE/PEDOT:PSS-AuNPs) is presented for the selective and sensitive detection of xanthine (XA). The developed sensor was successfully applied for the quantification of XA in the presence of significant interferents like hypoxanthine (HXA) and uric acid (UA). Different spectroscopy and electron microscopy analyses were done to characterize the as-prepared nanocomposite. Calibration responses for the quantification of XA was linear from 5.0 × 10⁻⁸ to 1.0 × 10⁻⁵ M (R² = 0.994), with a detection limit as low as 3.0 × 10⁻⁸ (S/N = 3). Finally, the proposed sensor was applied for the analyses of XA content in commercial fish and meat samples and satisfactory recovery percentage was obtained.

An innovative biosensor with glassy carbon electrodes modified with poly(3,4-ethylenedioxythiophene) polystyrene sulfonate nanocomposites as a host matrix with functionalized gold nanoparticles for the selective and sensitive detection of xanthine.

Electrochemical xanthine detection by enzymatic method based on Ag doped ZnO nanoparticles by using polypyrrole

A sensitive electrochemical detection of xanthine (X), which is an early biomarker of fish meat spoilage, was achieved by a novel biosensor developed via three main steps. The first step is the electropolymerization of a conducting polymer (pyrrole) onto the pencil graphite electrode (PGE). The second step is the entrapment of silver-doped zinc oxide nanoparticles (nano Ag-ZnO) onto PGE, which has already been doped with polypyrrole (PPy). The third step is the immobilization of the enzyme (xanthine oxidase) onto the modified electrode (nano Ag-ZnO/PPy/PGE) surface. The biosensor was characterized by scanning electron microscopy (SEM). The addition of Ag-doped ZnO nanoparticles into the conducting polymer structure played an important role in the performance of the biosensor by increasing the porous structure of the conducting polymer surface. The electrochemical behaviour of the biosensor was studied by electrochemical impedance spectroscopy (EIS) and chronoamperometry (CA). This enzyme biosensor showed the maximum response at pH 7.40 when +0.7 V was applied to reach 95% of steady-state current at ~3.2 s. The designed biosensor showed high selectivity with a sensitivity of 0.03 μA/mM and a low detection limit of 0.07 μM.

Study on heterogeneous photocatalytic ozonation degradation of ciprofloxacin by TiO2/carbon dots: Kinetic, mechanism and pathway investigation

In this study, the objective was mainly focusing on the mechanism investigation of ciprofloxacin (CIP) degradation by photocatalytic ozonation process which carried out by ozone and TiO₂ with a low content of carbon-dots (CDs) under simulated sunlight irradiation. The physicochemical properties of the prepared photocatalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscope (SEM) X-ray photoelectron spectroscopy (XPS) and zeta potential. Comprehensive investigation has proven the process to be efficient in the removal of CIP with high yield of reactive species (OH, O₂^-, h⁺, etc.). Kinetic model on pH investigation found out a repulsive force between the photocatalysts and CIP intensified with the increasing pH, so did the production rate of hydroxyl radicals (OH), while eventually reached a balance and achieved a maximum degradation rate. The results indicated that the enhancement mechanism was triggered by the photoexcited electron accumulated on CDs and transferred by ozone, resulting in the continuous generation of h+, O₃^- and O₂^-. Possible photocatalytic ozonation degradation pathways of CIP were proposed according to the identifications of intermediates using high-resolution accurate-mass spectrometry (HRAM) LC-MS/MS.

Non-radical pathway dominated catalytic oxidation of As(III) with stoichiometric H2O2 over nanoceria

Heterogeneous catalysis is a promising approach to achieve efficient As(III) oxidation by H₂O₂ at circumneutral pH. However, radical-attack pathways dominated catalytic As(III) oxidation over most metal oxides is undesirably associated with low utilization of H₂O₂ induced by rapid self-quenching of radicals. In this study, we developed a non-radical catalytic route to improve H₂O₂ utilization efficiency for catalytic As(III) oxidation based on nanoceria. The performance and mechanism of As(III) oxidation by H₂O₂ was investigated by employing four types of nanoceria with different crystallite sizes (9.1-80.6 nm). At the H₂O₂/As(III) molar ratio of 2.0, nanoceria exhibited crystallite size-dependent catalytic activity for oxidation of As(III) over a wide pH range (5-9). Based on comprehensive study including scavenging, enzymatic, and pretreatment experiments and miscellaneous spectroscopy techniques, the catalytic As(III) oxidation over nanoceria was proved to be mainly mediated by the non-radical Ce-hydroperoxo surface complexes, whilst the surface hydroperoxyl radical served as a minor oxidant. In contrast, the roles of dissolved oxygen, homogeneous H₂O₂, and OH radical were all negligible. No obvious interconversion of Ce(III)/Ce(IV) was observed by XPS for the catalytic process. Such non-radical pathway enabled a stoichiometric reaction with high H₂O₂ utilization efficiency (90.5%-122%). Moreover, nanoceria could be recycled for five consecutive runs without desorption/regeneration treatment. This study sheds new light on the development of nanoceria-based catalytic processes for efficient oxidation of As(III).

Methods to Assess the Antioxidative Properties of Probiotics

Probiotics prove useful in correcting and preventing numerous health conditions, including those having severe impact on society, e.g., obesity and cancer. Notably, these capabilities of probiotics appear to be associated with their antioxidant properties. The mechanisms of antioxidant action of probiotics range from immediate biochemical scavenging of reactive substances to induction of signaling events leading to increased capacity of the host's cytoprotective systems. Since the antioxidant effects of probiotics significantly vary in types and details, a broad selection of methods of assessment of these properties is required in order to identify, characterize, and develop novel probiotics for medical purposes, as well as to explain the mechanisms of action of probiotics already in use in healthcare. This review revises the versatile toolbox, which can be used to assess the antioxidant properties of probiotics.

Proteomic and functional analyses reveal pleiotropic action of the anti-tumoral compound NBDHEX in Giardia duodenalis

Giardiasis, a parasitic diarrheal disease caused by Giardia duodenalis, affects one billion people worldwide. Treatment relies only on a restricted armamentarium of drugs. The disease burden and the increase in treatment failure highlight the need for novel, safe and well characterized drug options. The antitumoral compound NBDHEX is effective in vitro against Giardia trophozoites and inhibits glycerol-3-phosphate dehydrogenase. Aim of this work was to search for additional NBDHEX protein targets. The intrinsic NBDHEX fluorescence was exploited in a proteomic analysis to select and detect modified proteins in drug treated Giardia. In silico structural analysis, intracellular localization and functional assays were further performed to evaluate drug effects on the identified targets. A small subset of Giardia proteins was covalently bound to the drug at specific cysteine residues. These proteins include metabolic enzymes, e.g. thioredoxin reductase (gTrxR), as well as elongation factor 1B-γ (gEF1Bγ), and structural proteins, e.g. α-tubulin. We showed that NBDHEX in vitro binds to recombinant gEF1Bγ and gTrxR, but only the last one could nitroreduce NBDHEX leading to drug modification of gTrxR catalytic cysteines, with concomitant disulphide reductase activity inhibition and NADPH oxidase activity upsurge. Our results indicate that NBDHEX reacts with multiple targets whose roles and/or functions are specifically hampered. In addition, NBDHEX is in turn converted to reactive intermediates extending its toxicity. The described NBDHEX pleiotropic action accounts for its antigiardial activity and encourages the use of this drug as a promising alternative for the future treatment of giardiasis.

Subcellular Redox Targeting: Bridging in Vitro and in Vivo Chemical Biology

Networks of redox sensor proteins within discrete microdomains regulate the flow of redox signaling. Yet, the inherent reactivity of redox signals complicates the study of specific redox events and pathways by traditional methods. Herein, we review designer chemistries capable of measuring flux and/or mimicking subcellular redox signaling at the cellular and organismal level. Such efforts have begun to decipher the logic underlying organelle-, site-, and target-specific redox signaling in vitro and in vivo. These data highlight chemical biology as a perfect gateway to interrogate how nature choreographs subcellular redox chemistry to drive precision redox biology.

Novel electrochemical xanthine biosensor based on chitosan-polypyrrole-gold nanoparticles hybrid bio-nanocomposite platform

The aim of this study was the electrochemical detection of the adenosine-3-phosphate degradation product, xanthine, using a new xanthine biosensor based on a hybrid bio-nanocomposite platform which has been successfully employed in the evaluation of meat freshness. In the design of the amperometric xanthine biosensor, chitosan-polypyrrole-gold nanoparticles fabricated by an in situ chemical synthesis method on a glassy carbon electrode surface was used to enhance electron transfer and to provide good enzyme affinity. Electrochemical studies were carried out by the modified electrode with immobilized xanthine oxidase on it, after which the biosensor was tested to ascertain the optimization parameters. The Biosensor exhibited a very good linear range of 1-200 μM, low detection limit of 0.25 μM, average response time of 8 seconds, and was not prone to significant interference from uric acid, ascorbic acid, glucose, and sodium benzoate. The resulting bio-nanocomposite xanthine biosensor was tested with fish, beef, and chicken real-sample measurements.

Xanthine sensor development based on ZnO–CNT, ZnO–CB, ZnO–GO and ZnO nanoparticles: an electrochemical approach

The wet-chemical method was used to prepare the various ZnO–CNT, ZnO–CB, ZnO–GO nanocomposites, and ZnO nanoparticles in higher pH medium, which were finally utilized with 5% nafion to produce a thin film of NCs/Nafion/GCE sensor that has a faster response towards selected xanthine with higher sensitivity, lower detection limit, and large linear dynamic range by electrochemical approach.

Selective and Reversible Approaches Toward Imaging Redox Signaling Using Small-Molecule Probes

SIGNIFICANCE

Recent research has identified key roles for reactive oxygen species (ROS)/reactive nitrogen species (RNS) in redox signaling, but much remains to be uncovered. Molecular imaging tools to study these processes must not only be selective to enable identification of the ROS/RNS involved but also reversible to distinguish signaling processes from oxidative stress. Fluorescent sensors offer the potential to image such processes with high spatial and temporal resolution.

RECENT ADVANCES

A broad array of strategies has been developed that enable the selective sensing of ROS/RNS. More recently, attention has turned to the design of reversible small-molecule sensors of global redox state, with a further set of probes capable of reversible sensing of individual ROS/RNS.

CRITICAL ISSUES

In this study, we discuss the key challenges in achieving simultaneous detection of reversible oxidative bursts with unambiguous determination of a particular ROS/RNS.

FUTURE DIRECTIONS

We have highlighted key design features of small-molecule probes that show promise in enabling the study of redox signaling, identifying essential parameters that must be assessed for any new probe. Antioxid. Redox Signal. 24, 713-730.

Ag3PO4 immobilized on hydroxy-metal pillared montmorillonite for the visible light driven degradation of acid red 18

Fe–Al/Mt as a host material to load Ag₃PO₄ can improve the photocatalytic performance and structural stability of Ag₃PO₄.

Fullerene modification of Ag3PO4 for the visible-light-driven degradation of acid red 18

Modification of Ag₃PO₄, by incorporation of fullerene, could improve the photocatalytic performance and structural stability of Ag₃PO₄.

Reactive oxygen species: Reactions and detection from photosynthetic tissues

Reactive oxygen species (ROS) have long been recognized as compounds with dual roles. They cause cellular damage by reacting with biomolecules but they also function as agents of cellular signaling. Several different oxygen-containing compounds are classified as ROS because they react, at least with certain partners, more rapidly than ground-state molecular oxygen or because they are known to have biological effects. The present review describes the typical reactions of the most important ROS. The reactions are the basis for both the detection methods and for prediction of reactions between ROS and biomolecules. Chemical and physical methods used for detection, visualization and quantification of ROS from plants, algae and cyanobacteria will be reviewed. The main focus will be on photosynthetic tissues, and limitations of the methods will be discussed.