Metal-catalyzed oxidation reactions and mass spectrometry: The roles of ascorbate and different oxidizing agents in determining Cu–protein-binding sites

Using mass spectrometry-based methods to understand amyloid formation and inhibition of alpha-synuclein and amyloid beta

Amyloid fibrils, insoluble β-sheets structures that arise from protein misfolding, are associated with several neurodegenerative disorders. Many small molecules have been investigated to prevent amyloid fibrils from forming; however, there are currently no therapeutics to combat these diseases. Mass spectrometry (MS) is proving to be effective for studying the high order structure (HOS) of aggregating proteins and for determining structural changes accompanying protein-inhibitor interactions. When combined with native MS (nMS), gas-phase ion mobility, protein footprinting, and chemical cross-linking, MS can afford regional and sometimes amino acid spatial resolution of the aggregating protein. The spatial resolution is greater than typical low-resolution spectroscopic, calorimetric, and the traditional ThT fluorescence methods used in amyloid research today. High-resolution approaches can struggle when investigating protein aggregation, as the proteins exist as complex oligomeric mixtures of many sizes and several conformations or polymorphs. Thus, MS is positioned to complement both high- and low-resolution approaches to studying amyloid fibril formation and protein-inhibitor interactions. This review covers basics in MS paired with ion mobility, continuous hydrogen-deuterium exchange (continuous HDX), pulsed hydrogen-deuterium exchange (pulsed HDX), fast photochemical oxidation of proteins (FPOP) and other irreversible labeling methods, and chemical cross-linking. We then review the applications of these approaches to studying amyloid-prone proteins with a focus on amyloid beta and alpha-synuclein. Another focus is the determination of protein-inhibitor interactions. The expectation is that MS will bring new insights to amyloid formation and thereby play an important role to prevent their formation.

MEMBRANE PROTEIN STRUCTURES AND INTERACTIONS FROM COVALENT LABELING COUPLED WITH MASS SPECTROMETRY

Membrane proteins are incredibly important biomolecules because they mediate interactions between a cell's external and internal environment. Obtaining information about membrane protein structure and interactions is thus important for understanding these essential biomolecules. Compared with the analyses of water-soluble proteins, the structural analysis of membrane proteins is more challenging owing to their unique chemical properties and the presence of lipid components that are necessary to solubilize them. The combination of covalent labeling (CL) and mass spectrometry (MS) has recently been applied with great success to study membrane protein structure and interactions. These studies have demonstrated the many advantages that CL-MS methods have over other traditional biophysical techniques. In this review, we discuss both amino acid-specific and non-specific labeling approaches and the special considerations needed to address the unique challenges associated with interrogating membrane proteins. This review highlights the aspects of this approach that require special care to be applied correctly and provides a comprehensive review of the membrane protein systems that have been studied by CL-MS. © 2020 John Wiley & Sons Ltd. Mass Spec Rev.

Hydroxyl Radical Protein Footprinting: A Mass Spectrometry-Based Structural Method for Studying the Higher Order Structure of Proteins

Hydroxyl radical protein footprinting (HRPF) coupled to mass spectrometry has been successfully used to investigate a plethora of protein-related questions. The method, which utilizes hydroxyl radicals to oxidatively modify solvent-accessible amino acids, can inform on protein interaction sites and regions of conformational change. Hydroxyl radical-based footprinting was originally developed to study nucleic acids, but coupling the method with mass spectrometry has enabled the study of proteins. The method has undergone several advancements since its inception that have increased its utility for more varied applications such as protein folding and the study of biotherapeutics. In addition, recent innovations have led to the study of increasingly complex systems including cell lysates and intact cells. Technological advances have also increased throughput and allowed for better control of experimental conditions. In this review, we provide a brief history of the field of HRPF and detail recent innovations and applications in the field.

Ambivalent role of ascorbic acid in the metal-catalyzed oxidation of oligopeptides

The effect of ascorbic acid on the metal-catalyzed oxidation of a human prion protein model peptide has been studied. The complex formation of the peptide was clarified first. The studied model peptide contains a methionine and a histidine amino acids which are important both as binding sites for metal ions and sensitive parts of the protein for oxidation. pH-potentiometric, UV-Vis and circular dichroism spectroscopic techniques were applied to study the stoichiometry, stability and structure of the copper(II) complexes, while HPLC-MS and MS/MS were used for identifying the products of metal-catalyzed oxidation. 3N and 4N complexes with (N_im,N^-,N^-,S) and (N_im,N^-,N^-,N^-) coordination modes are formed at pH 7.4, where the oxidation was studied. Singly, doubly and triply oxidized products are formed in which the methionine and/or the histidine side chain is oxidized. The oxidation was carried out with hydrogen peroxide solution by the addition of metal ions, namely copper(II) and iron(III) and/or ascorbic acid.

Determination of the glycoprotein specificity of lectins on cell membranes through oxidative proteomics

The cell membrane is composed of a network of glycoconjugates including glycoproteins and glycolipids that presents a dense matrix of carbohydrates playing critical roles in many biological processes. Lectin-based technology has been widely used to characterize glycoconjugates in tissues and cell lines. However, their specificity toward their putative glycan ligand and sensitivity in situ have been technologically difficult to study. Additionally, because they recognize primarily glycans, the underlying glycoprotein targets are generally not known. In this study, we employed lectin proximity oxidative labeling (Lectin PROXL) to identify cell surface glycoproteins that contain glycans that are recognized by lectins. Commonly used lectins were modified with a probe to produce hydroxide radicals in the proximity of the labeled lectins. The underlying polypeptides of the glycoproteins recognized by the lectins are oxidized and identified by the standard proteomic workflow. As a result, approximately 70% of identified glycoproteins were oxidized in situ by all the lectin probes, while only 5% of the total proteins were oxidized. The correlation between the glycosites and oxidation sites demonstrated the effectiveness of the lectin probes. The specificity and sensitivity of each lectin were determined using site-specific glycan information obtained through glycomic and glycoproteomic analyses. Notably, the sialic acid-binding lectins and the fucose-binding lectins had higher specificity and sensitivity compared to other lectins, while those that were specific to high mannose glycans have poor sensitivity and specificity. This method offers an unprecedented view of the interactions of lectins with specific glycoproteins as well as protein networks that are mediated by specific glycan types on cell membranes.

Mass Spectrometry-Based Protein Footprinting for Higher-Order Structure Analysis: Fundamentals and Applications

Proteins adopt different higher-order structures (HOS) to enable their unique biological functions. Understanding the complexities of protein higher-order structures and dynamics requires integrated approaches, where mass spectrometry (MS) is now positioned to play a key role. One of those approaches is protein footprinting. Although the initial demonstration of footprinting was for the HOS determination of protein/nucleic acid binding, the concept was later adapted to MS-based protein HOS analysis, through which different covalent labeling approaches "mark" the solvent accessible surface area (SASA) of proteins to reflect protein HOS. Hydrogen-deuterium exchange (HDX), where deuterium in D2O replaces hydrogen of the backbone amides, is the most common example of footprinting. Its advantage is that the footprint reflects SASA and hydrogen bonding, whereas one drawback is the labeling is reversible. Another example of footprinting is slow irreversible labeling of functional groups on amino acid side chains by targeted reagents with high specificity, probing structural changes at selected sites. A third footprinting approach is by reactions with fast, irreversible labeling species that are highly reactive and footprint broadly several amino acid residue side chains on the time scale of submilliseconds. All of these covalent labeling approaches combine to constitute a problem-solving toolbox that enables mass spectrometry as a valuable tool for HOS elucidation. As there has been a growing need for MS-based protein footprinting in both academia and industry owing to its high throughput capability, prompt availability, and high spatial resolution, we present a summary of the history, descriptions, principles, mechanisms, and applications of these covalent labeling approaches. Moreover, their applications are highlighted according to the biological questions they can answer. This review is intended as a tutorial for MS-based protein HOS elucidation and as a reference for investigators seeking a MS-based tool to address structural questions in protein science.

Copper ion / H2O2 oxidation of Cu/Zn-Superoxide dismutase: Implications for enzymatic activity and antioxidant action

Copper ion-catalyzed oxidation of yeast SOD1 (ySOD1) was examined to determine early oxidative modifications, including oxidation of a crucial disulfide bond, and the structural and functional repercussions of these events. The study used distinct oxidative conditions: Cu²⁺/H₂O₂, Cu²⁺/H₂O₂/AscH⁻ and Cu²⁺/H₂O₂/glucose. Capillary electrophoresis experiments and quantification of protein carbonyls indicate that ySOD1 is highly susceptible to oxidative modification and that changes can be detected within 0.1 min of the initiation of the reaction. Oxidation-induced structural perturbations, characterized by circular dichroism, revealed the formation of partially-unfolded ySOD1 species in a dose-dependent manner. Consistent with these structural changes, pyrogallol assay indicates a partial loss of enzymatic activity. ESI-MS analyses showed seven distinct oxidized ySOD1 species under mild oxidation within 0.1 min. LC/MS analysis after proteolytic digestion demonstrated that the copper-coordinating active site histidine residues, His47 and His49, were converted into 2-oxo-histidine. Furthermore, the Cu and Zn bridging residue, His64 is converted into aspartate/asparagine. Importantly, the disulfide-bond Cys58-Cys147 which is critical for the structural and functional integrity of ySOD1 was detected as being oxidized at Cys147. We propose, based on LC/MS analyses, that disulfide-bond oxidation occurs without disulfide bond cleavage. Modifications were also detected at Met85 and five surface-exposed Lys residues. Based on these data we propose that the Cys58-Cys147 bond may act as a sacrificial target for oxidants and protect ySOD1 from oxidative inactivation arising from exposure to Cu²⁺/H₂O₂ and auto-inactivation during extended enzymatic turnover.

•

Oxidation of yeast superoxide dismutase (ySOD1) by Cu²⁺/H₂O₂ is examined.

•

Rapid modification of His, Met, Cys and Lys residues detected by LC-MS methods.

•

Oxidation of active site His residues and partial protein unfolding are early events.

•

The Cys58-Cys147 disulfide bond is oxidized and may act as a sacrificial target.

•

Excess exogenous Cu²⁺ decreases protein damage and can reverse loss of activity.

Copper-induced oxidative cleavage of glutathione transferase F1-1 from Zea mays

Study of the interaction of glutathione transferase F1-1 from Zea mays (ZmGSTF1-1) with Cu(II), in the presence of ascorbate showed that the enzyme was rapidly inactivated. The inactivation was time and Cu(II) concentration dependent. The rate of inactivation showed non-linear dependence on Cu(II) concentration, indicating that a reversible complex with the enzyme (K_D 84.5 ± 6.5 μM) was formed. The inhibitors S-nitrobenzyl-glutathione or S-methyl-glutathione competes with Cu(II), suggesting the specificity of the chemical modification reaction. SDS-PAGE analysis of the inactivated enzyme showed that the enzyme is fragmented and two new bands of 13 and 11 kDa are formed. This shows that ZmGSTF1-1 was specifically cleaved at a single site, by the locally generated free radicals, through a Fenton-type reaction. Sequencing of the fragments allowed the identification of the Cu(II) binding site on ZmGSTF1-1. The three-dimensional structure of ZmGSTF1-1 reveals that the Cu(II) binding site is localized within the glutathione-binding site (G-site) and His40 and Gln53 are most likely the residues that provide the coordination sites for the Cu(II) binding. These findings were confirmed by site-directed mutagenesis. This copper-induced oxidative cleavage reaction of ZmGSTF1-1 may function as a detoxification route for Cu(II) for protecting plant cells from copper-induced deleterious effects.

Role of Buffers in Protein Formulations

Buffers comprise an integral component of protein formulations. Not only do they function to regulate shifts in pH, they also can stabilize proteins by a variety of mechanisms. The ability of buffers to stabilize therapeutic proteins whether in liquid formulations, frozen solutions, or the solid state is highlighted in this review. Addition of buffers can result in increased conformational stability of proteins, whether by ligand binding or by an excluded solute mechanism. In addition, they can alter the colloidal stability of proteins and modulate interfacial damage. Buffers can also lead to destabilization of proteins, and the stability of buffers themselves is presented. Furthermore, the potential safety and toxicity issues of buffers are discussed, with a special emphasis on the influence of buffers on the perceived pain upon injection. Finally, the interaction of buffers with other excipients is examined.

A Robust Analytical Approach for the Identification of Specific Protein Carbonylation Sites: Metal-Catalyzed Oxidations of Human Serum Albumin

The formation of protein carbonyls in the metal-catalyzed oxidation of human serum albumin (HSA) is characterized using a new analytical approach that involves tagging the modification site with multiple hydrazide reagents. Protein carbonyl formation at lysine and arginine residues was catalyzed with copper and iron ions, and the resulting oxidation patterns in HSA are contrasted. A total of 18 modification sites were identified with iron ion catalysis and 14 with copper ion catalysis. However, with the more stringent requirement of identification with at least two tagging reagents, the number of validated modification sites drops to 10 for iron and 9 for copper. Of the 14 total validated sites, there were only five in common for the two metal ions. The results illustrate the value of using multiple tagging agents and highlight the selective and specific nature of metal-catalyzed protein oxidations.

Distinct oxidative cleavage and modification of bovine [Cu- Zn]-SOD by an ascorbic acid/Cu(II) system: Identification of novel copper binding site on SOD molecule

We investigated the combined effect of ascorbate and copper [Asc/Cu(II)] on the integrity of bovine [Cu-Zn]-superoxide dismutase (bSOD1) as a model system to study the metal catalyzed oxidation (MCO) and fragmentation of proteins. We found Asc/Cu(II) mediates specific cleavage of bSOD1 and generates 12.5 and 3.2kDa fragments in addition to oxidation/carbonylation of the protein. The effect of other tested transition metals, a metal chelator, and hydrogen peroxide on the cleavage and oxidation indicated that binding of copper to a previously unknown site on SOD1 is responsible for the Asc/Cu(II) specific cleavage and oxidation. We utilized tandem mass spectrometry to identify the specific cleavage sites of Asc/Cu(II)-treated bSOD1. Analyses of tryptic- and AspN-peptides have demonstrated the cleavage to occur at Gly31 with peptide bond breakage with Thr30 and Ser32 through diamide and α-amidation pathways, respectively. The three-dimensional structure of bSOD1 reveals the imidazole ring of His19 localized within 5Å from the α-carbon of Gly31 providing a structural basis that copper ion, most likely coordinated by His19, catalyzes the specific cleavage reaction.

Oxidative protein labeling with analysis by mass spectrometry for the study of structure, folding, and dynamics

SIGNIFICANCE

Analytical approaches that can provide insights into the mechanistic processes underlying protein folding and dynamics are few since the target analytes-high-energy structural intermediates-are short lived and often difficult to distinguish from coexisting structures. Folding "intermediates" can be populated at equilibrium using weakly denaturing solvents, but it is not clear that these species are identical to those that are transiently populated during folding under "native" conditions. Oxidative labeling with mass spectrometric analysis is a powerful alternative for structural characterization of proteins and transient protein species based on solvent exposure at specific sites.

RECENT ADVANCES

Oxidative labeling is increasingly used with exceedingly short (μs) labeling pulses, both to minimize the occurrence of artifactual structural changes due to the incorporation of label and to detect short-lived species. The recent introduction of facile photolytic approaches for producing reactive oxygen species is an important technological advance that will enable more widespread adoption of the technique.

CRITICAL ISSUES

The most common critique of oxidative labeling data is that even with brief labeling pulses, covalent modification of the protein may cause significant artifactual structural changes.

FUTURE DIRECTIONS

While the oxidative labeling with the analysis by mass spectrometry is mature enough that most basic methodological issues have been addressed, a complete systematic understanding of side chain reactivity in the context of intact proteins is an avenue for future work. Specifically, there remain issues around the impact of primary sequence and side chain interactions on the reactivity of "solvent-exposed" residues. Due to its analytical power, wide range of applications, and relative ease of implementation, oxidative labeling is an increasingly important technique in the bioanalytical toolbox.

Copper is required for oncogenic BRAF signalling and tumorigenesis

The BRAF kinase is mutated, typically Val 600→Glu (V600E), to induce an active oncogenic state in a large fraction of melanomas, thyroid cancers, hairy cell leukaemias and, to a smaller extent, a wide spectrum of other cancers. BRAF(V600E) phosphorylates and activates the MEK1 and MEK2 kinases, which in turn phosphorylate and activate the ERK1 and ERK2 kinases, stimulating the mitogen-activated protein kinase (MAPK) pathway to promote cancer. Targeting MEK1/2 is proving to be an important therapeutic strategy, given that a MEK1/2 inhibitor provides a survival advantage in metastatic melanoma, an effect that is increased when administered together with a BRAF(V600E) inhibitor. We previously found that copper (Cu) influx enhances MEK1 phosphorylation of ERK1/2 through a Cu-MEK1 interaction. Here we show decreasing the levels of CTR1 (Cu transporter 1), or mutations in MEK1 that disrupt Cu binding, decreased BRAF(V600E)-driven signalling and tumorigenesis in mice and human cell settings. Conversely, a MEK1-MEK5 chimaera that phosphorylated ERK1/2 independently of Cu or an active ERK2 restored the tumour growth of murine cells lacking Ctr1. Cu chelators used in the treatment of Wilson disease decreased tumour growth of human or murine cells transformed by BRAF(V600E) or engineered to be resistant to BRAF inhibition. Taken together, these results suggest that Cu-chelation therapy could be repurposed to treat cancers containing the BRAF(V600E) mutation.

Unique effect of Cu(II) in the metal-induced amyloid formation of β-2-microglobulin

β-2-Microglobulin (β2m) forms amyloid fibrils in the joints of patients undergoing hemodialysis treatment as a result of kidney failure. In the presence of stoichiometric amounts of Cu(II), β2m self-associates into discrete oligomeric species, including dimers, tetramers, and hexamers, before ultimately forming amyloid fibrils that contain no copper. To improve our understanding of whether Cu(II) is unique in its ability to induce β2m amyloid formation and to delineate the coordinative interactions that allow Cu(II) to exert its effect, we have examined the binding of Ni(II) and Zn(II) to β2m and the resulting influence that these metals have on β2m aggregation. We find that, in contrast to Cu(II), Ni(II) does not induce the oligomerization or aggregation of β2m, while Zn(II) promotes oligomerization but not amyloid fibril formation. Using X-ray absorption spectroscopy and new mass spectrometry-related techniques, we find that different binding modes are responsible for the different effects of Ni(II) and Zn(II). By comparing the binding modes of Cu(II) with Ni(II), we find that Cu(II) binding to Asp59 and the backbone amide between the first two residues of β2m are important for allowing the formation of amyloid-competent oligomers, as Ni(II) appears not to bind these sites on the protein. The oligomers formed in the presence of Zn(II) are permitted by this metal's ability to bridge two β2m units via His51. These oligomers, however, are not able to progress to form amyloid fibrils because Zn(II) does not induce the required structural changes near the N-terminus and His31.

Experimental approach to controllably vary protein oxidation while minimizing electrode adsorption for boron-doped diamond electrochemical surface mapping applications

Oxidative protein surface mapping has become a powerful approach for measuring the solvent accessibility of folded protein structures. A variety of techniques exist for generating the key reagent (i.e., hydroxyl radicals) for these measurements; however, these approaches range significantly in their complexity and expense of operation. This research expands upon earlier work to enhance the controllability of boron-doped diamond (BDD) electrochemistry as an easily accessible tool for producing hydroxyl radicals in order to oxidize a range of intact proteins. Efforts to modulate the oxidation level while minimizing the adsorption of protein to the electrode involved the use of relatively high flow rates to reduce protein residence time inside the electrochemical flow chamber. Additionally, a different cell activation approach using variable voltage to supply a controlled current allowed us to precisely tune the extent of oxidation in a protein-dependent manner. In order to gain perspective on the level of protein adsorption onto the electrode surface, studies were conducted to monitor protein concentration during electrolysis and gauge changes in the electrode surface between cell activation events. This report demonstrates the successful use of BDD electrochemistry for greater precision in generating a target number of oxidation events upon intact proteins.

Histidine-containing host-defence skin peptides of anurans bind Cu2+. An electrospray ionisation mass spectrometry and computational modelling study

Anuran peptides which contain His, including caerin 1.8 (GLFKVLGSVAKHLLPHVVPVIAEKL-NH(2)), caerin 1.2 (GLLGVLGSVAKHVLPHVVPVIAEHL-NH(2)), Ala(15) maculatin 1.1 (GLFGVLAKVAAHVVAIEHF-NH(2)), fallaxidin 4.1 (GLLSFLPKVIGHLIHPPS-OH), riparin 5.1 (IVSYPDDAGEHAHKMG-NH(2)) and signiferin 2.1 (IIGHLIKTALGMLGL-NH(2)), all form MMet(2+) and (M + Met(2+)-2H(+))(2+) cluster ions (where Met is Cu, Mg and Zn) following electrospray ionisation (ESI) in a Waters QTOF 2 mass spectrometer. Peaks due to Cu(II) complexes are always the most abundant relative to other metal complexes. Information concerning metal(2+) connectivity in a complex has been obtained (at least in part) using b and y fragmentation data from ESI collision-induced dissociation tandem mass spectrometry (CID MS/MS). Theoretical calculations, using AMBER version 10, show that MCu(2+) complexes with the membrane active caerin 1.8, Ala(15) maculatin 1.1 and fallaxidin 4.1 are four-coordinate and approximating square planar, with ligands including His and Lys, together with the carbonyl oxygens of particular backbone amide groups. When binding can occur through two His, or one His and one Lys, the His/Lys ligand structure is the more stable for the studied systems. The three-dimensional (3D) structures of the complexes are always different from the previously determined structures of the uncomplexed model peptides (using 2D nuclear magnetic resonance (NMR) spectroscopy in membrane-mimicking solvents like trifluoroethanol/water).

Modeling of the DNA-binding site of yeast Pms1 by mass spectrometry

Mismatch repair (MMR) corrects replication errors that would otherwise lead to mutations and, potentially, various forms of cancer. Among several proteins required for eukaryotic MMR, MutLα is a heterodimer comprised of Mlh1 and Pms1. The two proteins dimerize along their C-terminal domains (CTDs), and the CTD of Pms1 houses a latent endonuclease that is required for MMR. The highly conserved N-terminal domains (NTDs) independently bind DNA and possess ATPase active sites. Here we use two protein footprinting techniques, limited proteolysis and oxidative surface mapping, coupled with mass spectrometry to identify amino acids involved along the DNA-binding surface of the Pms1-NTD. Limited proteolysis experiments elucidated several basic residues that were protected in the presence of DNA, while oxidative surface mapping revealed one residue that is uniquely protected from oxidation. Furthermore, additional amino acids distributed throughout the Pms1-NTD were protected from oxidation either in the presence of a non-hydrolyzable analog of ATP or DNA, indicating that each ligand stabilizes the protein in a similar conformation. Based on the recently published X-ray crystal structure of yeast Pms1-NTD, a model of the Pms1-NTD/DNA complex was generated using the mass spectrometric data as constraints. The proposed model defines the DNA-binding interface along a positively charged groove of the Pms1-NTD and complements prior mutagenesis studies of Escherichia coli and eukaryotic MutL.

Oxidative protein labeling in mass-spectrometry-based proteomics

Oxidation of proteins and peptides is a common phenomenon, and can be employed as a labeling technique for mass-spectrometry-based proteomics. Nonspecific oxidative labeling methods can modify almost any amino acid residue in a protein or only surface-exposed regions. Specific agents may label reactive functional groups in amino acids, primarily cysteine, methionine, tyrosine, and tryptophan. Nonspecific radical intermediates (reactive oxygen, nitrogen, or halogen species) can be produced by chemical, photochemical, electrochemical, or enzymatic methods. More targeted oxidation can be achieved by chemical reagents but also by direct electrochemical oxidation, which opens the way to instrumental labeling methods. Oxidative labeling of amino acids in the context of liquid chromatography(LC)-mass spectrometry (MS) based proteomics allows for differential LC separation, improved MS ionization, and label-specific fragmentation and detection. Oxidation of proteins can create new reactive groups which are useful for secondary, more conventional derivatization reactions with, e.g., fluorescent labels. This review summarizes reactions of oxidizing agents with peptides and proteins, the corresponding methodologies and instrumentation, and the major, innovative applications of oxidative protein labeling described in selected literature from the last decade.

Stability of protein pharmaceuticals: an update

In 1989, Manning, Patel, and Borchardt wrote a review of protein stability (Manning et al., Pharm. Res. 6:903-918, 1989), which has been widely referenced ever since. At the time, recombinant protein therapy was still in its infancy. This review summarizes the advances that have been made since then regarding protein stabilization and formulation. In addition to a discussion of the current understanding of chemical and physical instability, sections are included on stabilization in aqueous solution and the dried state, the use of chemical modification and mutagenesis to improve stability, and the interrelationship between chemical and physical instability.

Copper binding to beta-2-microglobulin and its pre-amyloid oligomers

Beta-2-microglobulin (beta2m) deposits as amyloid fibrils in the musculoskeletal system of patients undergoing long-term dialysis treatment as a result of kidney failure. Previous work has shown that Cu(II) binding causes beta2m to organize into nativelike dimers and tetramers that precede amyloid formation. Cu(II) is then released from higher-order oligomers before mature Cu(II)-free amyloid fibrils are formed. While some of the Cu(II)-induced structural changes that enable beta2m self-assembly are starting to be revealed, the details of how the Cu(II) binding site evolves from the monomer to the dimers and tetramers are not known. Here, we report results from three mass spectrometry (MS)-based methods that provide insight into the changing Cu-beta2m interactions. We find that monomeric beta2m binds Cu(II) via the N-terminal amine, the amide of Gln2, His31, and Asp59. In the dimer and tetramer, Asp59 is no longer bound to Cu(II), but the other residues still comprise a well-defined albeit weaker binding site that is better able to release Cu(II). Consistent with this is the observation that a fraction of the tetrameric species no longer binds Cu(II) at this weakened binding site, which agrees with a previous report that suggested the tetramer as the first Cu(II)-free oligomer. Our results also provide some insight into structural changes caused by Cu(II) binding that facilitate oligomer formation. Specifically, binding by Asp59 in the monomer requires significant movement of this residue, and we propose that this repositioning is important for establishing a pair of dimer-stabilizing salt bridges between this residue and Lys19. We also find evidence that Cu(II) binding in the N-terminal region of the monomer repels Arg3, which likely allows this residue to form a pair of dimer-stabilizing salt bridges with Glu16. Overall, our measurements suggest that the previously proposed conformational switch caused by Cu(II) binding includes not only a cis-trans isomerization at Pro32 but also the repositioning of residues that are critical for the formation of new electrostatic interactions.

Pulsed electron beam water radiolysis for submicrosecond hydroxyl radical protein footprinting

Hydroxyl radical footprinting is a valuable technique for studying protein structure, but care must be taken to ensure that the protein does not unfold during the labeling process due to oxidative damage. Footprinting methods based on submicrosecond laser photolysis of peroxide that complete the labeling process faster than the protein can unfold have been recently described; however, the mere presence of large amounts of hydrogen peroxide can also cause uncontrolled oxidation and minor conformational changes. We have developed a novel method for submicrosecond hydroxyl radical protein footprinting using a pulsed electron beam from a 2 MeV Van de Graaff electron accelerator to generate a high concentration of hydroxyl radicals by radiolysis of water. The amount of oxidation can be controlled by buffer composition, pulsewidth, dose, and dissolved nitrous oxide gas in the sample. Our results with ubiquitin and beta-lactoglobulin A demonstrate that one submicrosecond electron beam pulse produces extensive protein surface modifications. Highly reactive residues that are buried within the protein structure are not oxidized, indicating that the protein retains its folded structure during the labeling process. Time-resolved spectroscopy indicates that the major part of protein oxidation is complete in a time scale shorter than that of large scale protein motions.

Correct identification of oxidized histidine residues using electron-transfer dissociation

Oxidative modification to the side chain of histidine can noticeably change the collision-induced dissociation (CID) pathways of peptides containing this oxidized residue. In cases where an oxidized peptide consists two or more isomers differing only in the site of modification, oxidation to histidine usually causes the other oxidized sites to be mis-assigned in CID spectra. These spectral misassignments can sometimes be avoided by using multiple stages of MS/MS (MS(n)) or via specially optimized liquid chromatographic separation conditions. In this manuscript, we demonstrate that these misassignments can be more readily and easily avoided by using electron-transfer dissociation (ETD) to dissociate the oxidized peptides. Furthermore, we find that the relative insensitivity of ETD to side-chain chemistry allows the extent of oxidative modification to be determined readily for peptide isomers having more than one site of oxidation. The current results along with previous studies of oxidized peptides suggest that ETD is probably a better technique than CID for obtaining correct sequence and modification information for oxidized peptides.

Identification of the copper(II) coordinating residues in the prion protein by metal-catalyzed oxidation mass spectrometry: evidence for multiple isomers at low copper(II) loadings

While the Cu(II) binding sites of the prion protein have been well studied under Cu-saturation conditions, the identity of the residues involved in coordinating Cu(II) at low stoichiometries and the order in which the binding sites load with Cu(II) remain unresolved. In this study, we have used two mass spectrometry based methods to gather insight into Cu(II)-prion binding under different stoichiometric loadings of Cu(II). The first method uses metal-catalyzed oxidation reactions to site specifically modify the residues bound to Cu(II) in solution, and the second method determines Cu binding sites based on the protection of His from modification by diethyl pyrocarbonate when this residue binds Cu(II) in solution. For both methods, the residues that are labeled by these reactions can then be unambiguously identified using tandem mass spectrometry. Upon applying these two complementary methods to a construct of the prion protein that contains residues 23-28 and 57-98, several noteworthy observations are made. Coordination of Cu(II) by multiple His imidazoles is found at 1:1 and 1:2 PrP:Cu(II) ratios. Notably, there appear to be four to seven isomers of this multiple histidine coordination mode in the 1:1 complex. Furthermore, our data clearly show that His96 is the dominant Cu(II) binding ligand, as in every isomer His96 is bound to Cu(II). The individual octarepeat binding sites begin to fill at ratios of 1:3 PrP:Cu(II) with no clear preference for the order in which they load with Cu(II), although the His77 octarepeat appears to saturate last. The existence of several "degenerate" Cu binding modes at low PrP:Cu(II) ratios may allow it to more readily accept additional Cu(II) ions, thus allowing PrP to transition from a singly Cu(II) bound state to a multiply Cu(II) bound state as a function of cellular Cu(II) concentration.

Improved sequencing of oxidized cysteine and methionine containing peptides using electron transfer dissociation

Oxidative modifications to the side chains of sulfur-containing amino acids often limit the number of product ions formed during collision-induced dissociation (CID) and thus make it difficult to obtain sequence information for oxidized peptides. In this work, we demonstrate that electron-transfer dissociation (ETD) can be used to improve the sequence information obtained from peptides with oxidized cysteine and methionine residues. In contrast to CID, ETD is found to be much less sensitive to the side-chain chemistry, enabling extensive sequence information to be obtained in cases where CID fails to provide this information. These results indicate that ETD is a valuable technique for studying oxidatively modified peptides and proteins. In addition, we report a unique and very abundant product ion that is formed in the CID spectra of peptides having N-terminal cysteine sulfinic acid residues. The mechanism for this unique dissociation pathway involves a six-membered cyclic intermediate and leads to the facile loss of NH(3) and SO(2), which corresponds to a mass loss of 81 Da. While the facile nature of this dissociation pathway limits the sequence information present in CID spectra of peptides with N-terminal cysteine sulfinic acid residues, extensive sequence information for these peptides can be obtained with ETD.

Using microwave-assisted metal-catalyzed oxidation reactions and mass spectrometry to increase the rate at which the copper-binding sites of a protein are determined

Controlled microwave irradiation has been used to accelerate metal-catalyzed oxidation (MCO) reactions that site-specifically oxidize the amino acids bound to Cu in a metalloprotein. When combined with mass spectrometry, these MCO reactions provide a sensitive method for determining Cu-protein binding sites. In this work, we demonstrate that microwave irradiation can increase the rate of these site-specific oxidation reactions for Cu/Zn superoxide dismutase by at least 15-fold. By choosing the appropriate microwave power, changes to the protein's structure can be avoided while still accelerating the oxidation reactions. The maximum microwave power suitable for maintaining the protein's structural integrity can be readily determined by measuring the oxidation extent of different peptide fragments as a function of microwave power. Such determinations require several measurements and thus limit the overall throughput of this approach; however, these microwave-assisted reactions do provide good time resolution for studying dynamic changes to Cu-binding sites.

The effect of histidine oxidation on the dissociation patterns of peptide ions

Oxidative modifications to amino acid side chains can change the dissociation pathways of peptide ions, although these variations are most commonly observed when cysteine and methionine residues are oxidized. In this work we describe the very noticeable effect that oxidation of histidine residues can have on the dissociation patterns of peptide ions containing this residue. A common product ion spectral feature of doubly charged tryptic peptides is enhanced cleavage at the C-terminal side of histidine residues. This preferential cleavage arises as a result of the unique acid/base character of the imidazole side chain that initiates cleavage of a proximal peptide bond for ions in which the number of protons does not exceed the number of basic residues. We demonstrate here that this enhanced cleavage is eliminated when histidine is oxidized to 2-oxo-histidine because the proton affinity and nucleophilicity of the imidazole side chain are lowered. Furthermore, we find that oxidation of histidine to 2-oxo-histidine can cause the misassignment of oxidized residues when more than one oxidized isomer is simultaneously subjected to tandem mass spectrometry (MS/MS). These spectral misinterpretations can usually be avoided by using multiple stages of MS/MS (MS(n)) or by specially optimized liquid chromatographic separation conditions. When these approaches are not accessible or do not work, N-terminal derivatization with sulfobenzoic acid avoids the problem of mistakenly assigning oxidized residues.

Antioxidant mechanisms of enzymatic hydrolysates of beta-lactoglobulin in food lipid dispersions

The antioxidant activities of aqueous phase beta-lactoglobulin (beta-Lg) and its chymotryptic hydrolysates (CTH) were compared in this study. Proteins and peptides have been shown to inhibit lipid oxidation reactions in oil-in-water emulsions; however, a more fundamental understanding of the antioxidant activity of these compounds in dispersed food lipid systems is lacking. CTH was more effective than an equivalent concentration of beta-Lg in retarding lipid oxidation reactions when dispersed in the continuous phase of Brij-stabilized oil-in-water emulsions (pH 7). Furthermore, it was observed that CTH had higher peroxyl radical scavenging and iron-binding values than beta-Lg. Liquid chromatography-mass spectrometry (LC-MS) was used to measure the rate of oxidation of three oxidatively labile amino acid residues (Tyr, Met, and Phe) in certain CTH peptide fragments. Significant oxidation of specific Tyr and Met residues present in two separate 12 amino acid peptide fragments was observed in the days preceding lipid oxidation (39 and 55% of Tyr and Met were oxidized, respectively, by day 4 of the study); however, no significant oxidation of the Phe residue present in a specific 14 amino acid peptide fragment could be observed during the same time period. These data could suggest that Met and Tyr residues are capable of scavenging radical species and have the potential to improve the oxidative stability dispersed food lipids.

Using metal-catalyzed oxidation reactions and mass spectrometry to identify amino acid residues within 10 A of the metal in Cu-binding proteins

Metal-catalyzed oxidation (MCO) reactions and mass spectrometry (MS) can be used together to determine the amino acids bound to Cu in a metalloprotein. Selective oxidation of only amino acids bound to Cu during the MCO/MS approach relies on proper choice of the types and concentrations of the reducing and oxidizing agents. We show here that if these MCO reagent concentrations are "detuned" or varied slightly from optimal conditions, nonmetal-bound amino acids close to Cu can also be oxidized in a controlled manner. Using Cu/Zn superoxide dismutase as a model system, we demonstrate that amino acids up to 10 A from Cu can be modified as long as they are readily accessible to diffusing reactive oxygen species. UV/VIS spectroscopy and measurements of oxidation kinetics provide evidence that the protein's structural integrity around Cu is maintained during the detuned MCO reactions. Because this method can identify amino acids around Cu that have low solvent accessibility, it should complement other radical-based protein surface-mapping techniques.

Characterization of the metal-binding site of human prolactin by site-specific metal-catalyzed oxidation

Site-specific metal-catalyzed oxidation (MCO) was applied to characterize the metal-binding site (MBS) of recombinant human prolactin (hPRL), which belongs to the hematopoietic cytokine family. Copper and ascorbate of various concentrations were used to initiate the oxidation of hPRL, and the oxidation-sensitive motifs were characterized and quantitated by mass spectrometry. Based on the results obtained with 10 microM Cu(2+) and 0.3-2.0mM ascorbate, we propose that the MBS in hPRL is composed of His27, His30, and His173. This result shows the similarity of hPRL to human growth hormone (hGH), a member of the same family as hPRL, where the MBS is composed of His18, His21, and Glu174.

Effects of Anion Proximity in Peptide Primary Sequence on the Rate and Mechanism of Leucine Oxidation

Hydroxyl radical surface mapping is a useful tool for investigating protein structure and folding. The rate of protein side-chain oxidation by the hydroxyl radical is known to be affected primarily by the chemical reactivity of the side chain and the accessibility of the reactive site to the radical. Efforts have been made to determine the inherent rate of stable product formation of each amino acid side chain, so that the rate of oxidation of an amino acid can be used to accurately estimate the average solvent accessibility of the amino acid side chain in the folded protein. However, the effects of nearby primary sequence on peptide oxidation have not been studied. Here, we examine the amounts of various oxidation products of a small peptide consisting of one leucine and one aspartic acid separated by zero to five glycine residues, as well as with modification of the N- and C-terminus. We find that the relative amounts of certain oxidation products can be heavily influenced by the primary structure of the surrounding peptide. The formation of many products, including hydroxylation, is inhibited by proximity to negative charges, while the formation of other products showed more complicated responses to changing primary sequence.

Transition Metal−Peptide Binding Studied by Metal-Catalyzed Oxidation Reactions and Mass Spectrometry

We have identified conditions that allow metal-catalyzed oxidation (MCO) reactions and mass spectrometry (MS) to correctly identify binding sites of first-row transition metal ions to model peptides. This work extends the applicability of the MCO/MS method to metals other than Cu(II). When the appropriate reducing agent (ascorbate, 10 mM) and oxidizing agent concentrations (1 mM persulfate, atmospheric O2, or both) are used, metal-bound amino acids can be sufficiently and specifically oxidized for clear identification by MS. The MCO reactions with Mn(II), Fe(II), Co(II), and Ni(II) occur to lesser extents than with Cu(II), but oxidation is still extensive enough to allow easy identification of the metal-bound residues. With the exception of aspartic acid, the known metal-binding amino acids of angiotensin I and bacitracin A are oxidized, while no oxidation is observed at nonbinding residues. Failure to oxidize aspartic acid is likely due to the relatively slow reactivity of its carboxylic acid side chain with reactive oxygen species, suggesting that the current MCO/MS protocol is transparent to such acidic residues. Overall, this study indicates that, just as is possible for Cu(II), the MCO/MS method should be suitable for determining the Mn(II)-, Fe(II)-, Co(II)-, and Ni(II)-binding sites of metalloproteins.