Endotoxin detection in a competitive electrochemical assay: Synthesis of a suitable endotoxin conjugate

Highly Sensitive Electrochemical Endotoxin Sensor Based on Redox Cycling Using an Interdigitated Array Electrode Device

The Limulus amebocyte lysate (LAL) reaction-based assay, the most commonly used endotoxin detection method, requires a skilled technician. In this study, to develop an easy-to-use and highly sensitive endotoxin sensor, we created an electrochemical endotoxin sensor by using an interdigitated array electrode (IDAE) device with advantages of amplifiable signals via redox cycling and portability. We added Boc-Leu-Gly-Arg-p-aminophenol (LGR-pAP) as an electrochemical substrate for an LAL reaction and detected p-aminophenol (pAP) released from LGR-pAP as a product of an endotoxin-induced LAL reaction via an IDAE device. The IDAE device showed a great redox cycling efficiency of 79.8%, and a 4.79-fold signal amplification rate. Then, we confirmed that pAP was detectable in the presence of LGR-pAP through chronoamperometry with the potential of the anode stepped from -0.3 to 0.5 V vs. Ag/AgCl while the cathode was biased at -0.3 V vs. Ag/AgCl. Then, we performed an endotoxin assay by using the IDAE device. Our endotoxin sensor detected as low as 0.7 and 1.0 endotoxin unit/L after the LAL reaction for 1 h and 45 min, respectively, and these data were within the cut-off value for ultrapure dialysis fluid. Therefore, our highly sensitive endotoxin sensor is useful for ensuring medical safety.

Chemoselective ligation assisted DNA walker for analysis of double targets

Chemoselective ligation assisted DNA walker with input and output of double signals, has been constructed through simultaneous assistance of oxime chemistry and alkyne-azide cycloaddition. The constructed DNA walker has been further developed as a biosensor with lipopolysaccharide (LPS) and 5-hydroxymethyl-2-furaldehyde (HMF) as targets. The biosensor owns one-to-one mapping functionality and can sensitively distinguish all cases of two targets through the unique output signal feature. Moreover, the biosensor can simultaneously analyze LPS and HMF. This work provides a new insight for analysis of double targets based on chemoselective ligation assisted DNA walker.

Current technologies to endotoxin detection and removal for biopharmaceutical purification

Endotoxins are the major contributors to the pyrogenic response caused by contaminated pharmaceutical products, formulation ingredients, and medical devices. Recombinant biopharmaceutical products are manufactured using living organisms, including Gram-negative bacteria. Upon the death of a Gram-negative bacterium, endotoxins (also known as lipopolysaccharides) in the outer cell membrane are released into the lysate where they can interact with and form bonds with biomolecules, including target therapeutic compounds. Endotoxin contamination of biologic products may also occur through water, raw materials such as excipients, media, additives, sera, equipment, containers closure systems, and expression systems used in manufacturing. The manufacturing process is, therefore, in critical need of methods to reduce and remove endotoxins by monitoring raw materials and in-process intermediates at critical steps, in addition to final drug product release testing. This review paper highlights a discussion on three major topics about endotoxin detection techniques, upstream processes for the production of therapeutic molecules, and downstream processes to eliminate endotoxins during product purification. Finally, we have evaluated the effectiveness of endotoxin removal processes from a perspective of high purity and low cost.

Hydrazone chemistry assisted DNAzyme for the analysis of double targets

In this work, a hydrazone chemistry assisted DNAzyme has been designed and constructed. The introduction of hydrazone chemistry increases the versatility of DNAzymes. With superior catalytic capability, the hydrazone chemistry assisted DNAzyme has been successfully applied for the analysis of double targets. Taking 5-hydroxymethylfurfural (HMF) and lipopolysaccharide (LPS) as samples, the hydrazone chemistry assisted DNAzyme can be used for the detection of different combinations of targets. Moreover, because hydrazone chemistry is popular in nature, this work may also provide a new insight for the development of DNAzymes and their multifunctionality.

Highly Sensitive Endotoxin Assay Combining Peptide/Graphene Oxide and DNA-Modified Gold Nanoparticles

Endotoxin is a highly toxic stimulator originated from the outer membrane of Gram-negative bacteria, which should be monitored sensitively and selectively for human health concerns. Traditional detection methods mainly rely on limulus amoebocyte lysate assay. However, it suffers drawbacks like the narrow detection range, and the results may be environment-dependent. In this work, we have developed a sensitive electrochemical biosensor for endotoxin assay. Peptide is first designed as specific recognition element toward endotoxin. Graphene oxide and DNA-modified gold nanoparticles are then used to enhance the electrochemical signal. The analytical performances are excellent with the limit of detection as low as 0.001 EU mL^-1. This method has also been successfully applied in endotoxin assay in complex biological samples, which may have great potential use.

Preparation of a Peptide-Modified Electrode for Capture and Voltammetric Determination of Endotoxin

Endotoxin is the major structural constituent of the outer membrane of Gram-negative bacteria, which is a great threat to human health. Herein, a sensitive electrochemical biosensor for the detection of endotoxin is established by recording the voltammetric responses of the peptide-modified electrode. The utilized peptide has a high affinity for the target endotoxin, which ensures the high selectivity of this method. After the capture of endotoxin on the electrode surface, a negatively charged layer is formed, and the electron-transfer process is significantly hindered because of the increased steric hindrance and the electrostatic repulsion. The declined electrochemical signal could be used to indicate the concentration of endotoxin. This method is simple but effective, which requires limited reagents. Another highlight of this method is its user-friendly operation. Moreover, its applicability in human blood plasma promises its great potential utility in the near future.

A quartz crystal microbalance sensor for endotoxin assay by monitoring limulus amebocyte lysate protease reaction

Endotoxin is able to trigger strong innate immune responses by interacting with specific receptors on immune cells. Therefore, accurate and rapid detection of endotoxin is of primary importance. In this study, endotoxin induced viscosity variation of limulus amebocyte lysate (LAL) reagent is monitored by a quartz crystal microbalance (QCM) sensor with enhanced signal. Based on the analysis of the relationship between endotoxin concentration and QCM frequency shift with time, an effective sensing strategy is developed for endotoxin assay, which shows excellent sensitivity and specificity in the linear detection range from 0.005 to 10 EU mL^-1. Moreover, this QCM sensor could be reused after a simple regeneration procedure. Therefore, it has potential practical utility for endotoxin determination in various applications.

An elastography analytical method for the rapid detection of endotoxin

We present a flexible analytical method for the study of coagulation systems by monitoring elastography (EG). The rapid detection of endotoxin is achieved by the EG analysis of endotoxin-induced limulus amebocyte lysate coagulation. This method is superior to other methods using the same reagents in not only sensitivity but also detecting time.

Novel integrated and portable endotoxin detection system based on an electrochemical biosensor

This paper describes the design, implementation and validation of a sensitive and integral technology solution for endotoxin detection.

Development of a biological protocol for endotoxin detection using quartz crystal microbalance (QCM)

In this paper, a biological protocol for endotoxin detection has been developed and optimized by quartz crystal microbalance (QCM). The parameters involved in the formation of the self-assembled monolayer (SAM) have been analyzed, and a study of the pH of the ligand buffer has been performed in order to find the best condition for the ligand immobilization and, in consequence, for the endotoxin detection. The detection limit obtained with the characterized biological protocol corresponds to 1.90 μg/ml. The effectiveness of the optimized biological protocol has been analyzed by cyclic voltammetry analysis.

Detecting endotoxin with a flow cytometry-based magnetic aptasensor

Endotoxin, which is also known as lipopolysaccharide (LPS), is a marker for intruding gram-negative pathogens. It is essential to detect endotoxin quickly and sensitively in a complex milieu. A new flow cytometry (FCM)-based magnetic aptasensor assay that employs two endotoxin-binding aptamers and magnetic beads has been developed to detect endotoxin. The endotoxin-conjugated sandwich complex on magnetic beads was observed by scanning confocal laser microscopy. The resulting magnetic aptasensor rapidly detected (<1 min) endotoxin within a broad dynamic detection range of 10(-8) to 10(0)mg/ml in the presence of bovine serum albumin (BSA), RNA, sucrose, and glucose, which are most likely to coexist with endotoxin in the majority of biological liquids. Only 2 μl of magnetic aptasensor was required to quantify the endotoxin solution. Furthermore, the magnetic aptasensor could be regenerated seven times and still presented an outstanding response to the endotoxin solution. Therefore, the magnetic aptasensor exhibited high sensitivity, selectivity, and reproducibility, thereby serving as a powerful tool for the quality control and high-throughput detection of endotoxin in the food and pharmaceutical industries.

Recent advances in application of biosensors in tissue engineering

Biosensors research is a fast growing field in which tens of thousands of papers have been published over the years, and the industry is now worth billions of dollars. The biosensor products have found their applications in numerous industries including food and beverages, agricultural, environmental, medical diagnostics, and pharmaceutical industries and many more. Even though numerous biosensors have been developed for detection of proteins, peptides, enzymes, and numerous other biomolecules for diverse applications, their applications in tissue engineering have remained limited. In recent years, there has been a growing interest in application of novel biosensors in cell culture and tissue engineering, for example, real-time detection of small molecules such as glucose, lactose, and H2O2 as well as serum proteins of large molecular size, such as albumin and alpha-fetoprotein, and inflammatory cytokines, such as IFN-g and TNF-α. In this review, we provide an overview of the recent advancements in biosensors for tissue engineering applications.

Recent advances in biosensor based endotoxin detection

Endotoxins also referred to as pyrogens are chemically lipopolysaccharides habitually found in food, environment and clinical products of bacterial origin and are unavoidable ubiquitous microbiological contaminants. Pernicious issues of its contamination result in high mortality and severe morbidities. Standard traditional techniques are slow and cumbersome, highlighting the pressing need for evoking agile endotoxin detection system. The early and prompt detection of endotoxin assumes prime importance in health care, pharmacological and biomedical sectors. The unparalleled recognition abilities of LAL biosensors perched with remarkable sensitivity, high stability and reproducibility have bestowed it with persistent reliability and their possible fabrication for commercial applicability. This review paper entails an overview of various trends in current techniques available and other possible alternatives in biosensor based endotoxin detection together with its classification, epidemiological aspects, thrust areas demanding endotoxin control, commercially available detection sensors and a revolutionary unprecedented approach narrating the influence of omics for endotoxin detection.

Development of an electrochemical Limulus amebocyte lysate assay technique for portable and highly sensitive endotoxin sensor

Here, we report the development of an electrochemical detection method for endotoxin based on the Limulus amebocyte lysate (LAL) assay. A mixture of LAL reagent and endotoxin sample solution was incubated for 1 h. The endotoxin activated a cascade reaction of zymogens contained in the LAL to generate p-nitroaniline (pNA) which was then electrochemically detected by differential pulse voltammetry (DPV). The generated pNA gave a clear peak at –0.75 V vs. silver/silver chloride (Ag/AgCl), which increased with the concentration of endotoxin in the LAL assay solution. This DPV detection was performed using an electrode chip device fabricated from a diamond-like carbon-coated glass substrate. This chip device could detect as low as 10 endotoxin units l−1 at room temperature within 1 h. This novel electrochemical method for the detection of endotoxin appears promising for the development of compact, low-cost and easy-to-use sensors for on-site monitoring of potentially contaminated medical supplies, including dialysis fluid, transplanted tissue and culture medium for assisted reproduction.

Development of a novel aptamer-based sensing system using atomic force microscopy

Atomic force microscopy (AFM) can dynamically detect the adhesion or affinity force between a sample surface and a cantilever. This feature is useful as a detection method using aptamers--single-strand DNA that recognizes its target with very high affinity. The present study proposes a novel DNA aptamer-based sensing system using AFM. In this study, thrombin was chosen as the target molecule, and a DNA aptamer-based AFM sensing system based on competition was developed. The affinity force between the gold chip and the cantilever decreased as the concentration of thrombin increased. Moreover, a low detection limit of 0.2 nM was achieved. Therefore, the AFM sensing system used would be appropriate for the measurement of various chemical compounds.

Two efficient methods for the conjugation of smooth-form lipopolysaccharides with probes bearing hydrazine or amino groups. I. LPS activation with cyanogen bromide

This chapter presents a conjugation method for coupling probes bearing hydrazine or primary amino groups to a smooth(S)-form lipopolysaccharide (LPS). LPS is modified by the activation of the hydroxyl groups present in its O-antigen moiety with cyanogen bromide in aqueous acetone. The method yields conjugates with good labeling ratios, preserving the endotoxic activity of the lipid A moiety. Conjugation of smooth-form LPS from Salmonella enterica sv. Minnesota with dansyl hydrazine and horseradish -peroxidase yields labeling ratios above 300 nmol dansyl per mg LPS, with nearly no loss of the original endotoxin activity. In the case of horseradish peroxidase, introducing a spacer, a ratio of 28 nmol HRP per mg LPS is obtained, preserving 65% of the original endotoxic activity.