Template-blocking PCR: an advanced PCR technique for genome walking

Protocol to retrieve unknown flanking DNA sequences using semi-site-specific PCR-based genome walking

Here, we describe a protocol based on semi-site-specific primer PCR (3SP-PCR) to access unknown flanking DNA sequences. We specify the guidelines for designing primers for 3SP-PCR. We also describe experimental procedures for the 3SP-PCR, along with PCR product purification and subsequent sequencing and analysis. For complete details on the use and execution of this protocol, please refer to Wei et al.1.

Wristwatch PCR: A Versatile and Efficient Genome Walking Strategy

Genome walking is a method used to retrieve unknown flanking DNA. Here, we reported wristwatch (WW) PCR, an efficient genome walking technique mediated by WW primers (WWPs). WWPs feature 5′- and 3′-overlap and a heterologous interval. Therefore, a wristwatch-like structure can be formed between WWPs under relatively low temperatures. Each WW-PCR set is composed of three nested (primary, secondary, and tertiary) PCRs individually performed by three WWPs. The WWP is arbitrarily annealed somewhere on the genome in the one low-stringency cycle of the primary PCR, or directionally to the previous WWP site in one reduced-stringency cycle of the secondary/tertiary PCR, producing a pool of single-stranded DNAs (ssDNAs). A target ssDNA incorporates a gene-specific primer (GSP) complementary at the 3′-end and the WWP at the 5′-end and thus can be exponentially amplified in the next high-stringency cycles. Nevertheless, a non-target ssDNA cannot be amplified as it lacks a perfect binding site for any primers. The practicability of the WW-PCR was validated by successfully accessing unknown regions flanking Lactobacillus brevis CD0817 glutamate decarboxylase gene and the hygromycin gene of rice. The WW-PCR is an attractive alternative to the existing genome walking techniques.

Palindromic Sequence-Targeted (PST) PCR, Version 2: An Advanced Method for High-Throughput Targeted Gene Characterization and Transposon Display

Genome walking (GW), a strategy for capturing previously unsequenced DNA fragments that are in proximity to a known sequence tag, is currently predominantly based on PCR. Recently developed PCR-based methods allow for combining of sequence-specific primers with designed capturing primers capable of annealing to unknown DNA targets, thereby offering the rapidity and effectiveness of PCR. This study presents a methodological improvement to the previously described GW technique known as palindromic sequence-targeted PCR (PST-PCR). Like PST-PCR, this new method (called PST-PCR v.2) relies on targeting of capturing primers to palindromic sequences arbitrarily present in natural DNA templates. PST-PCR v.2 consists of two rounds of PCR. The first round uses a combination of one sequence-specific primer with one capturing (PST) primer. The second round uses a combination of a single (preferred) or two universal primers; one anneals to a 5' tail attached to the sequence-specific primer and the other anneals to a different 5' tail attached to the PST primer. The key advantage of PST-PCR v.2 is the convenience of using a single universal primer with invariable sequences in GW processes involving various templates. The entire procedure takes approximately 2-3 h to produce the amplified PCR fragment, which contains a portion of a template flanked by the sequence-specific and capturing primers. PST-PCR v.2 is highly suitable for simultaneous work with multiple samples. For this reason, PST-PCR v.2 can be applied beyond the classical task of GW for studies in population genetics, in which PST-PCR v.2 is a preferred alternative to amplified fragment length polymorphism (AFLP) or next-generation sequencing. Furthermore, the conditions for PST-PCR v.2 are easier to optimize, as only one sequence-specific primer is used. This reduces non-specific random amplified polymorphic DNA (RAPD)-like amplification and formation of non-templated amplification. Importantly, akin to the previous version, PST-PCR v.2 is not sensitive to template DNA sequence complexity or quality. This study illustrates the utility of PST-PCR v.2 for transposon display (TD), which is a method to characterize inter- or intra-specific variability related to transposon integration sites. The Ac transposon sequence in the maize (Zea mays) genome was used as a sequence tag during the TD procedure to characterize the Ac integration sites.

Branch migration-based polymerase chain reaction combined with endonuclease IV-assisted target recycling probe/blocker system for detection of low-abundance point mutations

Sensitive detection of low-abundance point mutations in blood or tissue may provide a great opportunity for the minimally invasive diagnosis of cancer and other related diseases. We demonstrate a novel method for ultra-sensitive detection of point mutations at low abundance by combination of branch migration-based PCR with endonuclease IV-assisted target recycling probe/blocker system. The method is able to identify the point mutations at abundances down to 0.01-0.02%. We anticipate this method to be widely adopted in clinical diagnosis and molecular research.

DNA-Templated Timer Probes for Multiplexed Sensing

Simultaneous analysis based on encoded fluorophores suffers from potential crosstalk between fluorophores and the limited number of colors that can be practically resolved. Inspired by nontrivial temporal patterns in living organisms, we developed a DNA-templated probe by utilizing DNA polymerase (DNAP) for multiplexed detection of nucleic acids. These probes use differential delay times of signaling by a DNAP-mediated extension to distinguish different targets, which serve as the primers. Taking advantage of the high processivity and the controllable kinetics of DNAP, we find that multiplexed detection can be achieved in homogeneous solution using a single fluorophore. As a proof of concept, we developed assays for genomic DNA from four different bacteria. In addition, we designed and implemented probes to undergo a single oscillation in signal as an alternative way for multiplexing. We anticipate this approach will find broad applications not only in sensing but also in synthetic DNA nanosystems.

Cyclic Digestion and Ligation-Mediated PCR Used for Flanking Sequence Walking

Ligation-mediated PCR (LM-PCR) is a classical method for isolating flanking sequences; however, it has a common limitation of reduced success rate owing to the circularization or multimerization of target restriction fragments including the known sequence. To address this limitation, we developed a novel LM-PCR method, termed Cyclic Digestion and Ligation-Mediated PCR (CDL-PCR). The novelty of this approach involves the design of new adapters that cannot be digested after being ligated with the restriction fragment, and cyclic digestion and ligation may be manipulated to block the circularization or multimerization of the target restriction fragments. Moreover, to improve the generality and flexibility of CDL-PCR, an adapter precursor sequence was designed, which could be digested to prepare 12 different adapters at low cost. Using this method, the flanking sequences of T-DNA insertions were obtained from transgenic rice and Arabidopsis thaliana. The experimental results demonstrated that CDL-PCR is an efficient and flexible method for identifying the flanking sequences in transgenic rice and Arabidopsis thaliana.

Palindromic sequence-targeted (PST) PCR: a rapid and efficient method for high-throughput gene characterization and genome walking

Genome walking (GW) refers to the capture and sequencing of unknown regions in a long DNA molecule that are adjacent to a region with a known sequence. A novel PCR-based method, palindromic sequence-targeted PCR (PST-PCR), was developed. PST-PCR is based on a distinctive design of walking primers and special thermal cycling conditions. The walking primers (PST primers) match palindromic sequences (PST sites) that are randomly distributed in natural DNA. The PST primers have palindromic sequences at their 3′-ends. Upstream of the palindromes there is a degenerate sequence (8–12 nucleotides long); defined adapters are present at the 5′-termini. The thermal cycling profile has a linear amplification phase and an exponential amplification phase differing in annealing temperature. Changing the annealing temperature to switch the amplification phases at a defined cycle controls the balance between sensitivity and specificity. In contrast to traditional genome walking methods, PST-PCR is rapid (two to three hours to produce GW fragments) as it uses only one or two PCR rounds. Using PST-PCR, previously unknown regions (the promoter and intron 1) of the VRN1 gene of Timothy-grass (Phleum pratense L.) were captured for sequencing. In our experience, PST-PCR had higher throughput and greater convenience in comparison to other GW methods.

A Simple Genome Walking Strategy to Isolate Unknown Genomic Regions Using Long Primer and RAPD Primer

Background

Genome walking is a DNA-cloning methodology that is used to isolate unknown genomic regions adjacent to known sequences. However, the existing genome-walking methods have their own limitations.

Objectives

Our aim was to provide a simple and efficient genome-walking technology.

Material and Methods

In this paper, we developed a novel PCR strategy (termed SLRA PCR) that uses a single long primer (SLP), a set of gene specific primers (GSP), and a random amplified polymorphic DNA (RAPD) primer for genome walking. SLRA PCR consists of two processes: the first amplification using SLP, and three successive rounds of nested PCR amplified by GSP and RAPD primer. The novelty of the approach lies in the use of long primers (SLP and GSP) and same annealing and extension temperature 68℃ in combination. This method offers higher amplification efficiency, superior versatility, and greater simplicity compared with conventional randomly primed PCR methods for genome walking.

Results

The promoter regions and the first introns of the insulin-like androgenic gland hormone (IAG) gene and the hemocyanin gene of Macrobrachium nipponense were cloned using SLRA PCR, respectively.

Conclusions

This genome walking strategy can be applied to a wide range of genomes.

Branch migration based selective PCR for DNA mutation enrichment and detection

A selective PCR for the enrichment of low-abundance mutations by introducing a branch migration blocker into the PCR process.

Stepwise partially overlapping primer-based PCR for genome walking

A stepwise partially overlapping primer-based PCR (SWPOP-PCR) method for isolating flanking unknown DNA regions was developed, which comprises three rounds of nested PCRs sequentially driven by SWPOP primer-nested specific primer pairs. SWPOP primer set is characterized by a partial overlap of 10 bp with 3′-part of the latter primer is identical to 5′-part of the former one, which makes the SWPOP primer in use anneal to SWPOP site of the prior PCR product only at relatively low temperature. For each PCR, target single-stranded DNA primed by the SWPOP primer in the exclusive one low-stringency cycle is converted into double-stranded form in the following high-stringency cycle due to the presence of a perfect annealing site for the specific primer. This double-stranded DNA bounded by the specific primer and the SWPOP primer is exponentially amplified in the remaining high-stringency cycles. Non-target single-stranded DNA, however, cannot be amplified given the lack of perfect complementary sequences for any primers. Therefore, the partial overlap of a SWPOP primer set preferentially synthesizes target products but inhibits nonspecific amplification. We successfully exploited SWPOP-PCR to obtain the DNA sequences flanking glutamate decarboxylase gene (gadA) locus in Lactobacillus brevis NCL912 and hygromycin gene (hyg) integrated in rice.

5-color multiplexed microwave-accelerated metal-enhanced fluorescence: detection and analysis of multiple DNA sequences from within one sample well within a few seconds

We present a potentially highly sensitive and selective bio-assay for the potential detection of any five different DNA sequences from one sample in one well. The assay is based on a DNA "rapid catch and signal" (DNA-RCS) technology developed for the detection of different DNA sequences from a sample well area. Our signal amplification utilizes the metal-enhanced fluorescence (MEF) of dyes attached to the probe-DNAs, which hybridizes with the pre-formed mixture of anchor-DNA scaffolds on silver island films (SiFs). Low-power microwave irradiation accelerates both the formation of the anchor-DNA scaffold on the SiF-surface and anchor/probe DNA hybridization, i.e. "rapid catch" of target DNAs from a bulk solution, decreasing the assay run time from hours to only a few seconds. Localization of signaling dye-labels close to the SiFs make them extremely photostable, which allows for collecting/integrating the signal over a long time period. To demonstrate a 5 color DNA assay (5-plex) we have used a range of readily available Alexa™ dyes. Advantages and perspectives of the RCS-technologies ability to detect 5 different DNA sequences from within one plate-well are discussed.

Restriction enzyme cutting site distribution regularity for DNA looping technology

The restriction enzyme cutting site distribution regularity and looping conditions were studied systematically. We obtained the restriction enzyme cutting site distributions of 13 commonly used restriction enzymes in 5 model organism genomes through two novel self-compiled software programs. All of the average distances between two adjacent restriction sites fell sharply with increasing statistic intervals, and most fragments were 0-499 bp. A shorter DNA fragment resulted in a lower looping rate, which was also directly proportional to the DNA concentration. When the length was more than 500 bp, the concentration did not affect the looping rate. Therefore, the best known fragment length was longer than 500 bp, and did not contain the restriction enzyme cutting sites which would be used for digestion. In order to make the looping efficiencies reach nearly 100%, 4-5 single cohesive end systems were recommended to digest the genome separately.

Revised selection criteria for candidate restriction enzymes in genome walking

A new method to improve the efficiency of flanking sequence identification by genome walking was developed based on an expanded, sequential list of criteria for selecting candidate enzymes, plus several other optimization steps. These criteria include: step (1) initially choosing the most appropriate restriction enzyme according to the average fragment size produced by each enzyme determined using in silico digestion of genomic DNA, step (2) evaluating the in silico frequency of fragment size distribution between individual chromosomes, step (3) selecting those enzymes that generate fragments with the majority between 100 bp and 3,000 bp, step (4) weighing the advantages and disadvantages of blunt-end sites vs. cohesive-end sites, step (5) elimination of methylation sensitive enzymes with methylation-insensitive isoschizomers, and step (6) elimination of enzymes with recognition sites within the binary vector sequence (T-DNA and plasmid backbone). Step (7) includes the selection of a second restriction enzyme with highest number of recognition sites within regions not covered by the first restriction enzyme. Step (8) considers primer and adapter sequence optimization, selecting the best adapter-primer pairs according to their hairpin/dimers and secondary structure. In step (9), the efficiency of genomic library development was improved by column-filtration of digested DNA to remove restriction enzyme and phosphatase enzyme, and most important, to remove small genomic fragments (<100 bp) lacking the T-DNA insertion, hence improving the chance of ligation between adapters and fragments harbouring a T-DNA. Two enzymes, NsiI and NdeI, fit these criteria for the Arabidopsis thaliana genome. Their efficiency was assessed using 54 T₃ lines from an Arabidopsis SK enhancer population. Over 70% success rate was achieved in amplifying the flanking sequences of these lines. This strategy was also tested with Brachypodium distachyon to demonstrate its applicability to other larger genomes.

An A-T linker adapter polymerase chain reaction method for chromosome walking without restriction site cloning bias

A-T linker adapter polymerase chain reaction (PCR) was modified and employed for the isolation of genomic fragments adjacent to a known DNA sequence. The improvements in the method focus on two points. The first is the modification of the PO(4) and NH(2) groups in the adapter to inhibit the self-ligation of the adapter or the generation of nonspecific products. The second improvement is the use of the capacity of rTaq DNA polymerase to add an adenosine overhang at the 3' ends of digested DNA to suppress self-ligation in the digested DNA and simultaneously resolve restriction site clone bias. The combination of modifications in the adapter and in the digested DNA leads to T/A-specific ligation, which enhances the flexibility of this method and makes it feasible to use many different restriction enzymes with a single adapter. This novel A-T linker adapter PCR overcomes the inherent limitations of the original ligation-mediated PCR method such as low specificity and a lack of restriction enzyme choice. Moreover, this method also offers higher amplification efficiency, greater flexibility, and easier manipulation compared with other PCR methods for chromosome walking. Experimental results from 143 Arabidopsis mutants illustrate that this method is reliable and efficient in high-throughput experiments.

Genome walking in eukaryotes

Genome walking is a molecular procedure for the direct identification of nucleotide sequences from purified genomes. The only requirement is the availability of a known nucleotide sequence from which to start. Several genome walking methods have been developed in the last 20 years, with continuous improvements added to the first basic strategies, including the recent coupling with next generation sequencing technologies. This review focuses on the use of genome walking strategies in several aspects of the study of eukaryotic genomes. In a first part, the analysis of the numerous strategies available is reported. The technical aspects involved in genome walking are particularly intriguing, also because they represent the synthesis of the talent, the fantasy and the intelligence of several scientists. Applications in which genome walking can be employed are systematically examined in the second part of the review, showing the large potentiality of this technique, including not only the simple identification of nucleotide sequences but also the analysis of large collections of mutants obtained from the insertion of DNA of viral origin, transposons and transfer DNA (T-DNA) constructs. The enormous amount of data obtained indicates that genome walking, with its large range of applicability, multiplicity of strategies and recent developments, will continue to have much to offer for the rapid identification of unknown sequences in several fields of genomic research.

An affinity-based genome walking method to find transgene integration loci in transgenic genome

Identifying a good transgenic event from the pool of putative transgenics is crucial for further characterization. In transgenic plants, the transgene can integrate in either single or multiple locations by disrupting the endogenes and/or in heterochromatin regions causing the positional effect. Apart from this, to protect the unauthorized use of transgenic plants, the signature of transgene integration for every commercial transgenic event needs to be characterized. Here we show an affinity-based genome walking method, named locus-finding (LF) PCR (polymerase chain reaction), to determine the transgene flanking sequences of rice plants transformed by Agrobacterium tumefaciens. LF PCR includes a primary PCR by a degenerated primer and transfer DNA (T-DNA)-specific primer, a nested PCR, and a method of enriching the desired amplicons by using a biotin-tagged primer that is complementary to the T-DNA. This enrichment technique separates the single strands of desired amplicons from the off-target amplicons, reducing the template complexity by several orders of magnitude. We analyzed eight transgenic rice plants and found the transgene integration loci in three different chromosomes. The characteristic illegitimate recombination of the Agrobacterium sp. was also observed from the sequenced integration loci. We believe that the LF PCR should be an indispensable technique in transgenic analysis.

Two-color, 30 second microwave-accelerated Metal-Enhanced Fluorescence DNA assays: a new Rapid Catch and Signal (RCS) technology

For analyses of DNA fragment sequences in solution we introduce a 2-color DNA assay, utilizing a combination of the Metal-Enhanced Fluorescence (MEF) effect and microwave-accelerated DNA hybridization. The assay is based on a new "Catch and Signal" technology, i.e. the simultaneous specific recognition of two target DNA sequences in one well by complementary anchor-ssDNAs, attached to silver island films (SiFs). It is shown that fluorescent labels (Alexa 488 and Alexa 594), covalently attached to ssDNA fragments, play the role of biosensor recognition probes, demonstrating strong response upon DNA hybridization, locating fluorophores in close proximity to silver NPs, which is ideal for MEF. Subsequently the emission dramatically increases, while the excited state lifetime decreases. It is also shown that 30s microwave irradiation of wells, containing DNA molecules, considerably (~1000-fold) speeds up the highly selective hybridization of DNA fragments at ambient temperature. The 2-color "Catch and Signal" DNA assay platform can radically expedite quantitative analysis of genome DNA sequences, creating a simple and fast bio-medical platform for nucleic acid analysis.

Use of inverse PCR for analysis of class 1 integrons carrying an unusual 3' conserved segment structure

By using inverse PCR and DNA sequencing, 13 sul3-associated mutational integrons, 2 defective class 1 integrons, and 1 qnrB2-associated complex sul1-type class 1 integrons were identified in Salmonella enterica serovar Choleraesuis, Pseudomonas aeruginosa, and Enterobacter cloacae, respectively. In addition, conjugation and Southern hybridization demonstrated that unusual class 1 integrons were located on plasmids or integrated into chromosomal DNA. Thus, an inverse PCR assay can be a valuable tool for the analysis of unusual structures of the 3' conserved region of class 1 integrons.