Development and characterization of novel 2'-F-RNA aptamers specific to human total and glycated hemoglobins

Novel DNA Aptamers to Dickkopf-1 Protein and Their Application in Colorimetric Sandwich Assays for Target Detection in Patients with Axial Spondyloarthritis

Chronic immunoinflammatory rheumatic diseases, such as axial spondyloarthritis (AxSpA), are accompanied by a dysregulation of bone remodeling. Among potential biomarkers of bone metabolism, the Wnt pathway antagonist, Dickkopf-1 (DKK-1), is of particular interest because of its potential to reflect a shift towards joint ossification or osteoporosis, but its diagnostic value needs validation. There is still a lack of stable and efficient methods of measuring serum DKK-1 levels suitable for longitude studies. The use of aptamer-based diagnostic assays could be very promising for this purpose. We generated novel anti-DKK-1 DNA aptamers from a combinatorial library with a pre-defined sequence pattern in the randomized region. This approach showed high efficacy, as only four SELEX rounds of selection produced high-affinity aptamers with dissociation constants ranging from 1.3 to 3.7 nM. A family of their truncated versions was also developed by rational design. Novel DNA aptamers functioned as capture components in a microplate ELISA-like assay with HRP-conjugated anti-DKK-1 antibody as a reporter component. We succeeded in revealing the aptamer/aptamer sandwich pairs that provided an aptamer-only sandwich colorimetric assay. The aptamer/antibody colorimetric test systems were also examined in the analyses of blood serum from AxSpA patients and shown sufficient workability. However, in a number of cases we registered significant differences between assays based on TD10 and DK4 aptamers and made some suggestions about the origin of this effect.

Bioluminescent aptamer-based microassay for detection of melanoma inhibitory activity protein (MIA)

Melanoma inhibitory activity protein (MIA) does obviously offer the potential to reveal clinical manifestations of melanoma. Despite a pressing need for effective diagnosis of this highly fatal disease, there are no clinically approved MIA detection ELISA kits available. A recommended MIA threshold has not yet been defined, mostly by reason of variability in immunoglobulins' affinity and stability, the difference in sample preparation and assay conditions. Here we present a pair of high-affinity DNA aptamers developed as an alternative recognition and binding element for MIA detection. Their stability and reproducible synthesis are expected to ensure this analysis under standard conditions. The devised aptamer-based solid-phase microassay of model standard and control human sera involves luciferase NLuc as a highly sensitive reporter. Bioluminescence dependence on MIA concentration ranges in a linear manner from 2.5 to 250 ng mL-1, providing a MIA detection limit of 1.67 ± 0.57 ng mL-1.

Systematic bio-fabrication of aptamers and their applications in engineering biology

Aptamers are single-stranded DNA or RNA molecules that have high affinity and selectivity to bind to specific targets. Compared to antibodies, aptamers are easy to in vitro synthesize with low cost, and exhibit excellent thermal stability and programmability. With these features, aptamers have been widely used in biology and medicine-related fields. In the meantime, a variety of systematic evolution of ligands by exponential enrichment (SELEX) technologies have been developed to screen aptamers for various targets. According to the characteristics of targets, customizing appropriate SELEX technology and post-SELEX optimization helps to obtain ideal aptamers with high affinity and specificity. In this review, we first summarize the latest research on the systematic bio-fabrication of aptamers, including various SELEX technologies, post-SELEX optimization, and aptamer modification technology. These procedures not only help to gain the aptamer sequences but also provide insights into the relationship between structure and function of the aptamers. The latter provides a new perspective for the systems bio-fabrication of aptamers. Furthermore, on this basis, we review the applications of aptamers, particularly in the fields of engineering biology, including industrial biotechnology, medical and health engineering, and environmental and food safety monitoring. And the encountered challenges and prospects are discussed, providing an outlook for the future development of aptamers.

A Review of Electrochemical Sensors for the Detection of Glycated Hemoglobin

Glycated hemoglobin (HbA1c) is the gold standard for measuring glucose levels in the diagnosis of diabetes due to the excellent stability and reliability of this biomarker. HbA1c is a stable glycated protein formed by the reaction of glucose with hemoglobin (Hb) in red blood cells, which reflects average glucose levels over a period of two to three months without suffering from the disturbance of the outside environment. A number of simple, high-efficiency, and sensitive electrochemical sensors have been developed for the detection of HbA1c. This review aims to highlight current methods and trends in electrochemistry for HbA1c monitoring. The target analytes of electrochemical HbA1c sensors are usually HbA1c or fructosyl valine/fructosyl valine histidine (FV/FVH, the hydrolyzed product of HbA1c). When HbA1c is the target analyte, a sensor works to selectively bind to specific HbA1c regions and then determines the concentration of HbA1c through the quantitative transformation of weak electrical signals such as current, potential, and impedance. When FV/FVH is the target analyte, a sensor is used to indirectly determine HbA1c by detecting FV/FVH when it is hydrolyzed by fructosyl amino acid oxidase (FAO), fructosyl peptide oxidase (FPOX), or a molecularly imprinted catalyst (MIC). Then, a current proportional to the concentration of HbA1c can be produced. In this paper, we review a variety of representative electrochemical HbA1c sensors developed in recent years and elaborate on their operational principles, performance, and promising future clinical applications.

Adsorption Kinetics of Glycated Hemoglobin on Aptamer Microarrays with Antifouling Surface Modification

Aptamers are oligonucleotides that bind with high affinity to target molecules of interest. One such target is glycated hemoglobin (gHb), a biomarker for assessing glycemic control and diabetes diagnosis. By the coupling of aptamers with surface plasmon resonance (SPR) sensing surfaces, a fast, reliable and inexpensive assay for gHb can be developed. In this study, we tested the affinity of SPR-sensing surfaces, composed of aptamers and antifouling self-assembled monolayers (SAMs), to hemoglobin (Hb) and gHb. First, we developed a gHb-targeted aptamer (GHA) through a modified Systematic Evolution of Ligands by EXponential (SELEX) enrichment process and tested its affinity to gHb using the Nano-Affi protocol. GHA was used to produce three distinct SAM-SPR-sensing surfaces: (Type-1) a SAM of GHA directly attached to a sensor surface; (Type-2) GHA attached to a SAM of 11-mercaptoundecanoic acid (11MUA) on a sensor surface; (Type-3) GHA attached to a binary SAM of 11MUA and 3,6-dioxa-8-mercaptooctan-1-ol (DMOL) on a sensor surface. Type-2 and Type-3 surfaces were characterized by cyclic voltammetry and electrochemical impedance spectroscopy to confirm that GHA bound to the underlying SAMs. The adsorption kinetics for Hb and gHb interacting with each SPR sensing surface were used to quantify their respective affinities. The Type-1 surface without antifouling modification had a dissociation constant ratio (K_D,Hb/K_D,gHb) of 9.7, as compared to 809.3 for the Type-3 surface, demonstrating a higher association of GHA to gHb for sensor surfaces with antifouling modifications than those without. The enhanced selectivity of GHA to gHb can likely be attributed to the inclusion of DMOL in the SAM-modified surface, which reduced interference from nonspecific adsorption of proteins. Results suggest that pairing aptamers with antifouling SAMs can significantly improve their target affinity, potentially allowing for the development of novel, low cost, and fast assays.

Coelenterazine-Dependent Luciferases as a Powerful Analytical Tool for Research and Biomedical Applications

: The functioning of bioluminescent systems in most of the known marine organisms is based on the oxidation reaction of the same substrate-coelenterazine (CTZ), catalyzed by luciferase. Despite the diversity in structures and the functioning mechanisms, these enzymes can be united into a common group called CTZ-dependent luciferases. Among these, there are two sharply different types of the system organization-Ca2+-regulated photoproteins and luciferases themselves that function in accordance with the classical enzyme-substrate kinetics. Along with deep and comprehensive fundamental research on these systems, approaches and methods of their practical use as highly sensitive reporters in analytics have been developed. The research aiming at the creation of artificial luciferases and synthetic CTZ analogues with new unique properties has led to the development of new experimental analytical methods based on them. The commercial availability of many ready-to-use assay systems based on CTZ-dependent luciferases is also important when choosing them by first-time-users. The development of analytical methods based on these bioluminescent systems is currently booming. The bioluminescent systems under consideration were successfully applied in various biological research areas, which confirms them to be a powerful analytical tool. In this review, we consider the main directions, results, and achievements in research involving these luciferases.

G-quadruplex 2'-F-modified RNA aptamers targeting hemoglobin: Structure studies and colorimetric assays

Biosensors that rely on aptamers as analyte-recognizing elements (also known as aptasensors) are gaining in popularity during recent years for analytical and biomedical applications. Among them, colorimetric ELISA-like systems seem very promising for biomarker detection in medical diagnostics. For their development, one should thoroughly consider the characteristics of the aptamers, with a particular focus on the secondary structure. In this study, we performed an in-depth structural study of previously selected hemoglobin-binding 2'-F-RNA aptamers using CD spectroscopy, enzymatic probing, and specific fluorophore binding. Only a combination of different assays allowed us to prove G-quadruplex formation for anti-hemoglobin 2'-F-RNA aptamers. We also demonstrated a possible application of these 2'-F-RNA aptamers for microplate colorimetric detection of human hemoglobin in both direct and sandwich formats.

Accurate and Efficient One-Pot Reverse Transcription and Amplification of 2'-Fluoro-Modified Nucleic Acids by Commercial DNA Polymerases

DNA is a foundational tool in biotechnology and synthetic biology but is limited by sensitivity to DNA-modifying enzymes. Recently, researchers have identified DNA polymerases that can enzymatically synthesize long oligonucleotides of modified DNA (M-DNA) that are resistant to DNA-modifying enzymes. Most applications require M-DNA to be reverse transcribed, typically using a RNA reverse transcriptase, back into natural DNA for sequence analysis or further manipulation. Here, we tested commercially available DNA-dependent DNA polymerases for their ability to reverse transcribe and amplify M-DNA in a one-pot reaction. Three of the six polymerases chosen (Phusion, Q5, and Deep Vent) could reverse transcribe and amplify synthetic 2'F M-DNA in a single reaction with <5 × 10^-3 error per base pair. We further used Q5 DNA polymerase to reverse transcribe and amplify M-DNA synthesized by two candidate M-DNA polymerases (SFP1 and SFM4-6), allowing for quantification of the frequency, types, and locations of errors made during M-DNA synthesis. From these studies, we identify SFP1 as one of the most accurate M-DNA polymerases identified to date. Collectively, these studies establish a simple, robust method for the conversion of 2'F M-DNA to DNA in <1 h using commercially available materials, significantly improving the ease of use of M-DNA.

Investigation of the recognition interaction between glycated hemoglobin and its aptamer by using surface plasmon resonance

Glycated hemoglobin (HbA1c) has been widely explored as an important marker for monitoring and diagnosing diabetes. Due to the advantages of high selectivity, easy preparation, and convenient preservation of aptamers, research on glycated hemoglobin detection utilizing aptasensors has received much attention in recent years. However, factors such as the pH and the salt concentration of the solution and the structure of the aptamer could influence the interactions between HbA1c and the aptamer. In this study, the factors were evaluated using surface plasmon resonance (SPR). The results show that the pH and the salt concentration can greatly affect the formation of a complex between the aptamer and HbA1c. In the stereostructure of the aptamer, loop L1 may be an important motif for recognizing glycated hemoglobin. In addition, the best condition for detecting HbA1c was at pH 6, with a high sensitivity and a low limit of detection(LOD) (1.06 × 10^-3RUnM /2.55 nM). The results also demonstrated that the use of an SPR aptamer biosensor can be a sensitive technique to improve the accuracy and correctness of HbA1c measurement.

The Ca2+ -Regulated Photoprotein Obelin as a Tool for SELEX Monitoring and DNA Aptamer Affinity Evaluation

Bioluminescent solid-phase analysis was proposed to monitor the selection process and to determine binding characteristics of the aptamer-target complexes during design and development of the specific aptamers. The assay involves Ca²⁺ -regulated photoprotein obelin as a simple, sensitive and fast reporter. Applicability and the prospects of the approach were exemplified by identification of DNA aptamers to cardiac troponin I, a highly specific early biomarker for acute myocardial infarction. Two structurally different aptamers specific to various epitopes of troponin I were obtained and then tested in a model bioluminescent assay.

Reporter-recruiting bifunctional aptasensor for bioluminescent analytical assays

A novel structure-switching bioluminescent 2′-F-RNA aptasensor consists of analyte-binding and obelin-recruiting modules, joined into a bi-specific aptamer construct.