Analysis of the therapeutic potential of miR-124 and miR-16 in non-alcoholic fatty liver disease

BACKGROUNDS

Non-alcoholic fatty liver disease (NAFLD) is a common condition affecting >25 % of the population worldwide. This disorder ranges in severity from simple steatosis (fat accumulation) to severe steatohepatitis (inflammation), fibrosis and, at its end-stage, liver cancer. A number of studies have identified overexpression of several key genes that are critical in the initiation and progression of NAFLD. MiRNAs are potential therapeutic agents that can regulate several genes simultaneously. Therefore, we transfected cell lines with two key miRNAs involved in targeting NAFLD-related genes.

METHODS

The suppression effects of the investigated miRNAs (miR-124 and miR-16) and genes (TNF, TLR4, SCD, FASN, SREBF2, and TGFβ-1) from our previous study were investigated by real-time PCR in Huh7 and HepG2 cells treated with oleic acid. Oil red O staining and the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay were utilized to assess cell lipid accumulation and cytotoxic effects of the miRNAs, respectively. The pro-oxidant-antioxidant balance (PAB) assay was undertaken for miR-16 and miR-124 after cell transfection.

RESULTS

Following transfection of miRNAs into HepG2, oil red O staining showed miR-124 and miR-16 reduced oleic acid-induced lipid accumulation by 35.2 % and 28.6 % respectively (p < 0.05). In Huh7, miR-124 and miR-16 reduced accumulation by 23.5 % and 31.3 % respectively (p < 0.05) but without impacting anti-oxidant activity. Real-time PCR in HepG2 revealed miR-124 decreased expression of TNF by 0.13-fold, TLR4 by 0.12-fold and SREBF2 by 0.127-fold (p < 0.05). miR-16 decreased TLR4 by 0.66-fold and FASN by 0.3-fold (p < 0.05). In Huh7, miR-124 decreased TNF by 0.12-fold and FASN by 0.09-fold (p < 0.05). miR-16 decreased SCD by 0.28-fold and FASN by 0.64-fold (p < 0.05). MTT assays showed, in HepG2, viability was decreased 24.7 % by miR-124 and decreased 33 % by miR-16 at 72 h (p < 0.05). In Huh7, miR-124 decreased viability 42 % at 48 h and 29.33 % at 72 h (p < 0.05), while miR-16 decreased viability by 32.3 % (p < 0.05).

CONCLUSION

These results demonstrate the ability of miR-124 and miR-16 to significantly reduce lipid accumulation and expression of key pathogenic genes associated with NAFLD through direct targeting. Though this requires further in vivo investigation.

Retraction notice to "The therapeutic potential of human adipose-derived mesenchymal stem cells producing CXCL10 in a mouse melanoma lung metastasis model" [Cancer Lett. 419 (2018) 30-39]

This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal). This article has been retracted at the request of the Editor. After publication, the Editors were contacted by a concerned reader regarding alleged image duplication. These allegations are in regard to Fig. 3a being duplicated from a previously published paper in the journal Stem Cells (Stem Cells. 2008 Sep;26 (9):2332-8. doi: 10.1634/stemcells.2008-0084) and Fig. 8a being duplicated from a previously published paper in the journal Molecular Cancer (Mol Cancer 13, 255 (2014). https://doi.org/10.1186/1476-4598-13-255). After a thorough investigation by the editorial team, the Editors determined that there are multiple identical details between Fig. 5A (Cancer Letters) and Fig. 3A (Stem Cells) and the authors did not produce satisfactory evidence that the published images in Cancer Letters were original. Due to this, the Editor does not have confidence in the results and conclusions presented and has made the decision to retract.

Dysregulated microRNAs in prostate cancer: In silico prediction and in vitro validation

Objectives

MicroRNAs, which are micro-coordinators of gene expression, have been recently investigated as a potential treatment for cancer. The study used computational techniques to identify microRNAs that could target a set of genes simultaneously. Due to their multi-target-directed nature, microRNAs have the potential to impact multiple key pathways and their pathogenic cross-talk.

Materials and Methods

We identified microRNAs that target a prostate cancer-associated gene set using integrated bioinformatics analyses and experimental validation. The candidate gene set included genes targeted by clinically approved prostate cancer medications. We used STRING, GO, and KEGG web tools to confirm gene-gene interactions and their clinical significance. Then, we employed integrated predicted and validated bioinformatics approaches to retrieve hsa-miR-124-3p, 16-5p, and 27a-3p as the top three relevant microRNAs. KEGG and DIANA-miRPath showed the related pathways for the candidate genes and microRNAs.

Results

The Real-time PCR results showed that miR-16-5p simultaneously down-regulated all genes significantly except for PIK3CA/CB in LNCaP; miR-27a-3p simultaneously down-regulated all genes significantly, excluding MET in LNCaP and PIK3CA in PC-3; and miR-124-3p could not down-regulate significantly PIK3CB, MET, and FGFR4 in LNCaP and FGFR4 in PC-3. Finally, we used a cell cycle assay to show significant G0/G1 arrest by transfecting miR-124-3p in LNCaP and miR-16-5p in both cell lines.

Conclusion

Our findings suggest that this novel approach may have therapeutic benefits and these predicted microRNAs could effectively target the candidate genes.

Synthesis and evaluation of gene delivery vectors based on PEI-modified metal-organic framework (MOF) nanoparticles

Objectives

Zirconium-based metal-organic frameworks (MOFs) nanostructures, due to their capability of easy surface modification, are considered interesting structures for delivery. In the present study, the surfaces of UIO-66 and NH2-UIO-66 MOFs were modified by polyethyleneimine (PEI) 10000 Da, and their efficiency for plasmid delivery was evaluated.

Materials and Methods

Two different approaches, were employed to prepare surface-modified nanoparticles. The physicochemical characteristics of the resulting nanoparticles, as well as their transfection efficiency and cytotoxicity, were investigated on the A549 cell line.

Results

The sizes of DNA/nanocarriers for PEI-modified UIO-66 (PEI-UIO-66) were between 212-291 nm and 267-321 nm for PEI 6-bromohexanoic acid linked UIO-66 (PEI-HEX-UIO-66). The zeta potential of all was positive with the ranges of +16 to +20 mV and +23 to +26 mV for PEI-UIO-66 and PEI-HEX-UIO-66, respectively. Cellular assay results showed that the PEI linking method had a higher rate of gene transfection efficiency with minimal cytotoxicity than the wet impregnation method. The difference between transfection of modified nanoparticles compared to the PEI 10 kDa was not significant but the PEI-HEX-UIO-66 showed less cytotoxicity.

Conclusion

The present study suggested that the post-synthetic modification of MOFs with PEI 10000 Da through EDC/NHS+6-bromohexanoic acid reaction can be considered as an effective approach for modifying MOFs' structure in order to obtain nanoparticles with better biological function in the gene delivery process.

Development of a Novel Sulfur Quantum Dots: Synthesis, 99mTc Radiolabeling, and Biodistribution

Sulfur quantum dots (SQDs) as free heavy metal element quantum dots have promising applications in diagnosis and therapy; however, SQDs' in vivo biodistribution has not been studied. In the current study, SQDs were synthesized directly from cheap sublimated sulfur powder via a one-pot solvothermal method, and sucrose was used as a stabilizer to enhance stability and biocompatibility. The as-obtained SQDs with an average size of 4.6 nm exhibited great water dispersity, highly favorable quantum yield (21.5%), and uniformly spherical shape which were confirmed by UV-Vis, fluorescence spectrophotometer, TEM, and FESEM/EDX/PSA analyses. Moreover, the as-synthesized SQDs had very low cytotoxicity based on cancer (C26) and normal (L929) cell lines via MTT assay. And also, SQDs were radio-labeled directly by Technetium-99m (99mTc), which had good stability ranging from 86 to 99% in PBS and human serum. The SQDs' cell uptake on C26 and L929 cell lines demonstrated that cancer cells had more uptake than normal cells by increasing concentrations. Moreover, SQDs' in vivo biodistribution results displayed high kidney dose accumulation and rapid renal clearance, making them suitable for imaging and therapeutic applications.

Design and characterization of adipose-derived mesenchymal stem cell loaded alginate/pullulan/hyaluronic acid hydrogel scaffold for wound healing applications

Recently, significant attention has been focused on the progression of skin equivalents to facilitate faster wound healing and thereby skin restoration. The main aim of this study was the design and characterization of a novel polysaccharide-based hydrogel scaffold by using alginate, pullulan, and hyaluronic acid polymers to provide an appropriate microenvironment to deliver Adipose-derived mesenchymal Stem Cells (ASC) in order to promote wound healing in an animal model. Characterization of synthesized hydrogel was done by using a field emission scanning electron microscope (FE-SEM), Fourier Transform-Infrared spectroscopy (FT-IR), and Differential Scanning Calorimetry (DSC). Also, contact angle analysis, the swelling and mechanical tests were performed. As a result of in vitro studies, cells can be attached, alive, and migrate through the prepared hydrogel scaffold. Finally, the therapeutic effect of the cell-seeded hydrogels was tested in the full-thickness animal wound model. Based on obtained results, the hydrogel-ASC treatment improved the healing process and accelerated wound closure.

Selective Cellular Uptake and Cytotoxicity of Curcumin-encapsulated SPC and HSPC Liposome Nanoparticles on Human Bladder Cancer Cells

BACKGROUND

Curcumin is a main bioactive constituent of turmeric (Curcuma longa L.) with pleiotropic health beneficial effects. However, poor bioavailability is the major barrier to the efficient pharmacological effects of curcumin in humans.

AIMS

The present study aimed to develop liposome formulations based on soybean phosphatidylcholine (SPC) and hydrogenated SPC (HSPC) to enhance the bioavailability of curcumin in bladder cancer cells.

METHODS

Curcumin was encapsulated in HSPC and SPC liposome nanoparticles using the solvent evaporation method. Physical properties, encapsulation efficiency (%), stability, and in vitro drug release of the prepared liposome formulations have been evaluated. The cellular uptake and cytotoxicity of curcumin-encapsulated nanoliposomes on bladder carcinoma HTB9 cell line and normal fibroblast L929 cell line were studied. DNA fragmentation, apoptosis, and genotoxicity assessments have been carried out to determine the molecular mechanisms underlying the cytotoxic effects of liposomal curcumin formulations on bladder cancer cells.

RESULTS

The results indicated that curcumin could be efficiently encapsulated in the HSPC and SPC liposome formulations. The liposomal curcumin formulations have shown shelf-life stability for 14 weeks at 4°C. The accelerated stability testing showed that curcumin encapsulated in nanoliposomes was significantly (p < 0.001) more stable than free curcumin at various pH degrees ranging from alkaline to acidic pH. The in vitro drug release study showed curcumin to be sustainably released from the liposome nanoparticles. Of note, SPC and HSPC nanoliposome formulations significantly increased the cellular uptake and cytotoxicity of curcumin on bladder cancer HTB9 cells. Mechanistically, liposomal curcumin was found to exert a selective inhibitory effect on the viability of cancer cells by inducing apoptosis and DNA damage.

CONCLUSION

In conclusion, SPC and HSPC liposome nanoparticles can significantly increase the stability and bioavailability of curcumin, which are important for improving its pharmacological effect.

A new molecularly imprinted polymer electrochemical sensor based on CuCo2 O4 /N-doped CNTs/P-doped GO nanocomposite for detection of 25-hydroxyvitamin D3 in serum samples

25-Hydroxyvitamin D₃ as a main circulating metabolite of vitamin D is usually measured in serum to evaluate the vitamin D status of humans. So, developing an accessible, fast response, sensitive, and selective detection method for 25-hydroxyvitamin D₃ is highly important. In this study, we designed a sensitive and selective electrochemical sensor based on the modification of glassy carbon electrode by nanocomposite of CuCo₂ O₄ /nitrogen-doped carbon nanotubes and phosphorus-doped graphene oxide. Then 25-hydroxyvitamin D₃ -imprinted polypyrrole was coated on the electrode surface through electropolymerization. Moreover, ferricyanide was used as a mediator for the creation of a readable signal, which was considerably decreased after rebinding of 25-hydroxyvitamin D₃ on the electrode. The proposed sensor successfully detected 25-hydroxyvitamin D₃ in the range of 0.002-10 μM, with a detection limit of 0.38 nM, which was highly lower than deficiency concentration (20 ng/ml; 49.92 nM). Finally, the proposed sensor was checked for detection of 25-hydroxyvitamin D3 in serum samples with recovery in the range of 80%-106.42%. The results demonstrated the applicability of the designed sensor for the detection of 25-hydroxyvitamin D₃ in biological samples.

Zinc- and Copper-Doped Mesoporous Borate Bioactive Glasses: Promising Additives for Potential Use in Skin Wound Healing Applications

In this study, zinc (Zn)- and copper (Cu)-doped 13-93B3 borate mesoporous bioactive glasses (MBGs) were successfully synthesized using nitrate precursors in the presence of Pluronic P123. We benefited from computational approaches for predicting and confirming the experimental findings. The changes in the dynamic surface tension (SFT) of simulated body fluid (SBF) were investigated using the Du Noüy ring method to shed light on the mineralization process of hydroxyapatite (HAp) on the glass surface. The obtained MBGs were in a glassy state before incubation in SBF. The formation of an apatite-like layer on the SBF-incubated borate glasses was investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The incorporation of Zn and Cu into the basic composition of 13-93B3 glass led to changes in the glass transition temperature (Tg) (773 to 556 °C), particle size (373 to 64 nm), zeta potential (−12 to −26 mV), and specific surface area (SBET) (54 to 123 m2/g). Based on the K-means algorithm and chi-square automatic interaction detection (CHAID) tree, we found that the SFT of SBF is an important factor for the prediction and confirmation of the HAp mineralization process on the glasses. Furthermore, we proposed a simple calculation, based on SFT variation, to quantify the bioactivity of MBGs. The doped and dopant-free borate MBGs could enhance the proliferation of mouse fibroblast L929 cells at a concentration of 0.5 mg/mL. These glasses also induced very low hemolysis (<5%), confirming good compatibility with red blood cells. The results of the antibacterial test revealed that all the samples could significantly decrease the viability of Pseudomonas aeruginosa. In summary, we showed that Cu-/Zn-doped borate MBGs can be fabricated using a cost-effective method and also show promise for wound healing/skin tissue engineering applications, as especially supported by the cell test with fibroblasts, good compatibility with blood, and antibacterial properties.

Harnessing the Therapeutic Potential of Antimicrobial Peptides for Cancers: State of the Art

Despite significant breakthroughs in cancer treatment, cancer remains a serious global health concern that takes thousands of lives each year. Still, drug resistance and adverse effects are the main problems in conventional cancer therapeutic approaches. Thus, the discovery of new anticancer agents with distinct mechanisms of action is a critical requirement that offers significant obstacles. Antimicrobial peptides (AMPs), which can be found in various forms of life, are recognized as defensive weapons against infections of microbial pathogens. Surprisingly, they are also capable of killing a variety of cancer cells. These powerful peptides can cause cell death in the gastrointestinal, urinary tract, and reproductive cancer cell lines. To emphasize the anti-cancer properties of AMPs, we summarize the research that examined their impact on cancer cell lines in this review.

Recent Advances in Lung Cancer Therapy Based on Nanomaterials: A Review

Lung cancer is one of the commonest cancers with a significant mortality rate for both genders, particularly in men. Lung cancer is recognized as one of the leading causes of death worldwide, which threatens the lives of over 1.6 million people every day. Although cancer is the leading cause of death in industrialized countries, conventional anticancer medications are unlikely to increase patients' life expectancy and quality of life significantly. In recent years, there are significant advances in the development and applications of nanotechnology in cancer treatment. The superiority of nanostructured approaches is that they act more selectively than traditional agents. This progress led to the development of a novel field of cancer treatment known as nanomedicine. Various formulations based on nanocarriers, including lipids, polymers, liposomes, nanoparticles and dendrimers have opened new horizons in lung cancer therapy. The application and expansion of nano-agents lead to an exciting and challenging research era in pharmaceutical science, especially for the delivery of emerging anti-cancer agents. The objective of this review is to discuss the recent advances in three types of nanoparticle formulations for lung cancer treatments modalities, including liposomes, polymeric micelles, and dendrimers for efficient drug delivery. Afterward, we have summarized the promising clinical data on nanomaterials based therapeutic approaches in ongoing clinical studies.

A novel regulatory facet for hypertriglyceridemia: The role of microRNAs in the regulation of triglyceride-rich lipoprotein biosynthesis

Atherosclerotic cardiovascular disease (ASCVD) is one of the major leading global causes of death. Genetic and epidemiological studies strongly support the causal association between triacylglycerol-rich lipoproteins (TAGRL) and atherogenesis, even in statin-treated patients. Recent genetic evidence has clarified that variants in several key genes implicated in TAGRL metabolism are strongly linked to the increased ASCVD risk. There are several triacylglycerol-lowering agents; however, new therapeutic options are in development, among which are miRNA-based therapeutic approaches. MicroRNAs (miRNAs) are small non-coding RNAs (18-25 nucleotides) that negatively modulate gene expression through translational repression or degradation of target mRNAs, thereby reducing the levels of functional genes. MiRNAs play a crucial role in the development of hypertriglyceridemia as several miRNAs are dysregulated in both synthesis and clearance of TAGRL particles. MiRNA-based therapies in ASCVD have not yet been applied in human trials but are attractive. This review provides a concise overview of current interventions for hypertriglyceridemia and the development of novel miRNA and siRNA-based drugs. We summarize the miRNAs involved in the regulation of key genes in the TAGRLs synthesis pathway, which has gained attention as a novel target for therapeutic applications in CVD.

Ellagic acid as a potent anticancer drug: A comprehensive review on in vitro, in vivo, in silico, and drug delivery studies

Ellagic acid as a polyphenol or micronutrient, which can be naturally found in different vegetables and fruits, has gained considerable attention for cancer therapy due to considerable biological activities and different molecular targets. Ellagic acid with low hydrolysis and lipophilic and hydrophobic nature is not able to be absorbed in circulation. So, accumulation inside the intestinal epithelial cells or metabolization to other urolithins leads to the limitation of direct evaluation of EA effects in clinical studies. This review focuses on the studies which supported anticancer activity of pure or fruit-extracted ellagic acid through in vitro, in vivo, in silico, and drug delivery methods. The results demonstrate ellagic acid modulates the expression of various genes incorporated in the cancer-related process of apoptosis and proliferation, inflammation related-gens, and oxidative-related genes. Moreover, the ellagic acid formulation in carriers composed of lipid, silica, chitosan, iron- bovine serum albumin nanoparticles obviously enhanced the stable release and confident delivery with minimum loss. Also, in silico analysis proved that ellagic acid was able to be placed at a position of cocrystal ADP, in the deep cavity of the protein target, and tightly interact with binding pocket residues leading to suppression of substrate availability of protein and its activation inhibition.

Development of Lateral Flow Assays for Rapid Detection of Troponin I: A Review

Troponin I as a particular and major biomarker of cardiac failure is released to blood demonstrating hurt of myocardial cells. Unfortunately, troponin I detection in the first hours of acute myocardial infarction usually faces with most negligence. Therefore, developments of point of care devices such as lateral flow strips are highly required for timely diagnosis and prognosis. Lateral flow assays are low-cost paper-based detection platforms relying on specific diagnostic agents such as aptamers and antibodies for a rapid, selective, quantitative and semi-quantitative detection of the analyte in a complex mixture. Moreover, lateral flow assay devices are portable, and their simplicity of use eliminates the need for experts or any complicated equipment to operate and interpret the test results. Additionally, by coupling the lateral flow assay technology with nanotechnology, for labeling and signal amplification, many breakthroughs in the field of diagnostics have been achieved. The present study reviews the use of lateral flow assays in early stage, quantitative, and sensitive detection of cardiac troponin I and mainly focuses on the structure of each type of developed lateral flow assays. Finally, this review summarized the improvements, detection time, and limit of detection of each study as well as the advantages and disadvantages.

An overview of polyallylamine applications in gene delivery

A chief objective of gene transportation studies is to manipulate clinically accepted carriers that can be utilized to combat incurable diseases. Despite various strategies, efficiency and application of these vectors have been hindered, owing to different obstacles. Polyallylamine (PAA) is a synthetic water-soluble, weak base cationic polymer with different properties that could be administrated as an ideal candidate for biomedical applications such as gene delivery, drug delivery, or even tissue engineering. However, some intrinsic properties of this polymer limit its application. The two associated problems with the use of PAA in gene delivery are low transfection efficiency (because of low buffering capacity) and cytotoxic effects attributed to intense cationic character. Most of the strategies for structural modification of the PAA structure have focused on introducing hydrophobic groups to the polymeric backbone that target both cytotoxicity and transfection. In this perspective, we concentrate on PAA as a gene delivery vehicle and the existing approaches for modification of this cationic polymer to give insight to researchers for exploitation of PAA as an efficient carrier in biomedical applications.

Synthesis and characterization of polyethyleneimine-terminated poly(β-amino esters) conjugated with pullulan for gene delivery

Cationic polymers endowed with a flexible system for condensing DNA, are regarded as effective materials for gene delivery. The synthesis of poly(β-amino esters) (pBAEs) based on 1,4-butanediol diacrylate-ethanolamine monomer (1.2:1 molar ratio) and 1,4-butanediol diacrylate-ethylene diamine (1:2 molar ratio) were carried out and modification with 1800 Da polyethyleneimine (PEI) at different weight ratios (3 and 1) as well as conjugation with pullulan in various weight ratios of (0.0625, 0.125, 0.25, and 1) performed. Gel-retardation assay demonstrated that the synthesized polymers were able to condense DNA at low carrier/plasmid (C/P) ratios. The polyplexes with ratio 3 of PEI (pβ₁/PEI₃) were restricted in all C/P ratios and the polyplexes of pβ₁/PEI₃/pull_0.125 were condensed at C/P ratios higher than 0.5. The particle size at C/P were approximately about 200 nm with a positive surface charge. The presence of the pullulan in the structure of the synthesized pBAEs could be effective in reducing toxicity of the base polymer. Highest metabolic activity dedicated to C/P₂ of pβ₂/PEI₃/pull_0.125 with 80.6 percent viability. Furthermore, the most efficient gene reporter delivery was seen at C/P ratio of 6 in pβ₂/PEI₃/pull_0.125 nanoparticles. Therefore, pullulan grafting could enhance the cellular response of cells in terms of cytotoxicity and transfection efficiency.

Coaxial 3D bioprinting of tri-polymer scaffolds to improve the osteogenic and vasculogenic potential of cells in co-culture models

The crosstalk between osteoblasts and endothelial cells is critical for bone vascularization and regeneration. Here, we used a coaxial 3D bioprinting method to directly print an osteon-like structure by depositing angiogenic and osteogenic bioinks from the core and shell regions of the coaxial nozzle, respectively. The bioinks were made up of gelatin, gelatin methacryloyl (GelMA), alginate, and hydroxyapatite (HAp) nanoparticles and were loaded with human umbilical vascular endothelial cells (HUVECs) and osteoblasts (MC3T3) in the core and shell regions, respectively. Conventional monoaxial 3D bioprinting was used as a control method, where the hydrogels, HAp nanoparticles, MC3T3 cells, and HUVECs were all mixed in one bioink and printed from the core nozzle. As a result, the bioprinted scaffolds were composed of cell-laden fibers with either a core-shell or homogenous structure, providing a non-contact (indirect) or contact (direct) co-culture of MC3T3 cells and HUVECs, respectively. Both structures supported the 3D culture of HUVECs and osteoblasts over a long period. The scaffolds also supported the expression of osteogenic and angiogenic factors. However, the gene expression was significantly higher for the core-shell structure than the homogeneous structure due to the well-defined distribution of osteoblasts and endothelial cells and the formation of vessel-like structures in the co-culture system. Our results indicated that the coaxial bioprinting technique, with the ability to create a non-contact co-culture of cells, can provide a more efficient bioprinting strategy for printing highly vascularized and bioactive bone structures.

Biosensors, microfluidics systems and lateral flow assays for circulating microRNA detection: A review

MicroRNAs (miRNAs) are short RNA sequences found in eukaryotic cells and they are involved in several diseases pathogenesis including different types of cancers, metabolic and cardiovascular disorders. Thus, miRNAs circulating in serum, plasma, and other body fluids are employed as biomarkers for diagnostic and prognostic purposes and in assessment of drug response. Thus, various methods have been developed for detection of miRNAs including northern blotting, reverse transcriptase polymerase chain reaction (RT-PCR), next-generation sequencing, microarray, and isothermal amplification that are recognized as traditional methods. Considering the importance of early diagnosis and treatment of miRNAs-related diseases, development of simple, one-step, sensitive methods is of great interest. Nowadays developing technologies including lateral flow assay, biosensors (optical and electrochemical) and microfluidic systems which are simple fast responding, user-friendly, and are enabled with visible detection have gained considerable attention. This review briefly discusses miRNAs detection' methods, with a particular focus on lateral flow assay, biosensors, and microfluidic systems as novel and practical procedures.

Preparation of Chitosan Nanoparticles as a Capable Carrier for Antigen Delivery and Antibody Production

Background

Chitosan (CS) nanoparticles have attracted considerable attention as a non-viral and cationic carrier for delivery of therapeutic proteins and antigens and offer non-invasive routes of administration such as oral, nasal and ocular routes, and also show adjuvant characteristics for vaccines.

Objectives

Preparation and formulation of CS nanoparticles as a capable carrier with immunoadjuvant properties to enhance the bioavailability of antigen and produce antibody with high affinity.

Materials and Methods

CS nanoparticles were produced by ionic gelation process of sodium tripolyphosphate (TPP) with CS. Particle size and morphology of nanoparticles were determined using Dynamic Light Scattering (DLS) and Scanning Electron Microscopy (SEM) and also direct observation under light microscope. The influence of the initial BSA concentration and CS concentration on loading efficiency and release behavior was evaluated. The ε-toxin (derived from Clostridium perfringens type D) was loaded on CS nanoparticles and the complex was injected hypodermically into the rabbits for once. The anti ε-toxin antibody level in blood serum was evaluated using Dot Blot and ELISA methods.

Results

The CS nanoparticles in different groups have a particle diameter (Z-average) in approximate ranges of 200-400, 300-600, 450-800 nm and a positive Zeta potential (32.4 - 48.6 mv). Optimum loading efficiency was achieved for CS at a concentration of 0.5 mg.mL^-1 and TPP of 1.0 mg.mL^-1. The results showed that the toxin-CS complex produces antitoxin at levels more than twice as high the control.

Conclusion

The CS nanoparticles can be used as a good biodegradable carrier for protein and antigen delivery.

Self-assembly of an aptamer-decorated chimeric peptide nanocarrier for targeted cancer gene delivery

In this study, we developed a peptide-based non-viral carrier decorated with aptamer to overcome the specific gene delivery barriers. The carrier (KLN/Apt) was designed to contain multiple functional segments, including 1) two tandem repeating units of low molecular weight protamine (LMWP) to condense DNA into stable nanosize particles and protect it from enzymatic digestion, 2) AS1411 aptamer as targeting moiety to target nucleolin and promote carrier internalization, 3) a synthetic pH-sensitive fusogenic peptide (KALA) for disrupting endosomal membranes and enhancing cytosol escape of the nanoparticles, and 4) a nuclear localization signal (NLS) for active cytoplasmic trafficking and nuclear delivery of DNA. The obtained results revealed the developed carrier capacity in terms of specific cell targeting, overcoming cellular gene delivery barriers, and mediating efficient gene transfection. The KLN/pDNA/aptamer nanoparticles offer remarkable potential for the conceptual design and formation of promising multi-functionalized carriers towards the most demanding therapeutic applications.

Potential SARS-CoV-2 vaccines: Concept, progress, and challenges

Since September 2020, the world has had more than 28 million cases of coronavirus disease 2019 (COVID-19). Many countries are facing a second wave of the COVID-19 outbreak. A pressing need is evident for the development of a potent vaccine to control the SARS-CoV-2. Institutions and companies in many countries have announced their vaccine research programs and progress against the COVID-19. While most vaccines go through the designation and preparation stages, some of them are under evaluation for efficacy among animal models and clinical trials, and three approved vaccine candidates have been introduced for limited exploitation in Russia and China. An effective vaccine must induce a protective response of both cell-mediated and humoral immunity and should meet the safety and efficacy criteria. Although the emergence of new technologies has accelerated the development of vaccines, there are several challenges on the way, such as limited knowledge about the pathophysiology of the virus, inducing humoral or cellular immunity, immune enhancement with animal coronavirus vaccines, and lack of an appropriate animal model. In this review, we firstly discuss the immune responses against SARS-CoV-2 disease, subsequently, give an overview of several vaccine platforms for SARS-CoV-2 under clinical trials and challenges in vaccine development against this virus.

Biosensors based on aptamer-conjugated gold nanoparticles: A review

Simply synthetized gold nanoparticles have been highly used in medicine and biotechnology as a result of their biocompatibility, conductivity, and being easily functionalized with biomolecules such as aptamer. Aptamer-conjugated gold nanoparticle structures synergically possess characteristics of both aptamer and gold nanoparticles including high binding affinity, high biocompatibility, enhanced target selectivity, and long circulatory half-life. Aptamer-conjugated gold nanoparticles have extensively gained considerable attention for designing of biosensing systems due to their interesting optical and electrochemical features. Moreover, biosensors based on aptamer-gold nanoparticles are easy to use, with fast response, and inexpensive which make them ideal in individualized medicine, disease markers detection, food safety, and so forth. Moreover, due to high selectivity and biocompatibility of aptamer-gold nanoparticles, these biosensing platforms are ideal tools for targeted drug delivery systems. The application of this nanostructure as diagnostic and therapeutic tool has been developed for detection of cancer in the early stage by detecting cancer biomarkers, pathogens, proteins, toxins, antibiotics, adenosine triphosphate, and other small molecules. This review obviously demonstrates that this nanostructure effectively is applicable in the field of biomedicine and possesses potential of commercialization aims.

Development of detection methods for the diagnosis and analysis of highly toxic metal phosphides: A comprehensive and critical review

Metal phosphides, especially aluminum phosphide, and phosphine (PH₃ ) are widely used as insecticides and rodenticides for protection of grains during process of storage and transportation. The main reason of poisoning with this compound is related to the conscious ingestion of salts or accidental inhalation of PH₃ . So the early and accurate diagnosis of poisoning can significantly help to the effective clinical treatment or recognition of death cause. PH₃ is somewhat unstable due to reaction with oxygen or hemoglobin leading to formation of oxy-acids phosphorous. Here, we critically reviewed the literature introducing the quantitative and qualitative methods for the detection of metal phosphides, PH₃ , and its products. This study obviously demonstrates that during past years, different diagnosis methods have been remarkably progressed. Head-space gas chromatography and confirmatory colorimetric methods have been as the most popular techniques. Also, the gas sensors are a promising method that must be more progressed.

Retraction Note: Electrochemical Sensor for Detection of miRs Based on the Differential Effect of Competitive Structures in The p19 Function

Editor's Note: this Article has been retracted; the Retraction Note is available at https://doi.org/10.1038/s41598-021-83097-0.

CRISPR/Cas9 mediated GFP-human dentin matrix protein 1 (DMP1) promoter knock-in at the ROSA26 locus in mesenchymal stem cell for monitoring osteoblast differentiation

BACKGROUND

Dentin matrix protein 1 (DMP1) is highly expressed in mineralized tooth and bone, playing a critical role in mineralization and phosphate metabolism. One important role for the expression of DMP1 in the nucleus of preosteoblasts is the up-regulation of osteoblast-specific genes such as osteocalcin and alkaline phosphatase¹ . The present study aimed to investigate the potential application of human DMP1 promoter as an indicator marker of osteoblastic differentiation.

METHODS

In the present study, we developed DMP1 promoter-DsRed-GFP knock-in mesenchymal stem cell (MSCs) via the clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 (Cas9) system that enabled automatic detection of osteoblast differentiation. With the application of a homology-directed knock-in strategy, a 2-kb fragment of DMP1 promoter, which was inserted upstream of the GFP and DsRed reporter cassette, was integrated into the human ROSA locus to generate double fluorescent cells. We further differentiated MSCs under osteogenic media to monitor the fate of MSCs. First, cells were transfected using CRISPR/Cas9 plasmids, which culminated in MSCs with a green fluorescence intensity, then GFP-positive cells were selected using puromycin. Second, the GFP-positive MSCs were differentiated toward osteoblasts, which demonstrated an increased red fluorescence intensity. The osteoblast differentiation of MSCs was also verified by performing alkaline phosphatase and Alizarin Red assays.

RESULTS

We have exploited the DMP1 promoter as a predictive marker of MSC differentiation toward osteoblasts. Using the CRISPR/Cas9 technology, we have identified a distinctive change in the fluorescence intensities of GFP knock-in (green) and osteoblast differentiated MSCs ² .

CONCLUSIONS

The data show that DMP1-DsRed-GFP knock-in MSCs through CRISPR/Cas9 technology provide a valuable indicator for osteoblast differentiation. Moreover, The DMP1 promoter might be used as a predictive marker of MSCs differentiated toward osteoblasts.

Cerium oxide nanoparticles: A promising tool for the treatment of fibrosarcoma in-vivo

In this study, we used cerium oxide nanoparticles and evaluated their anti-cancer effects in a mouse model of fibrosarcoma. For evaluation of anti-cancer effects of nanoceria, tumor volume measurement, TUNEL (terminal deoxynucleotidyl transferase dUTP nick end labeling) assay, quantitative real-time PCR (qPCR) for Bax and Bcl2 genes, a panel of liver and kidney function tests and hematoxylin-eosin staining were done. Nanoceria dominantly accumulated in the tumor and it could significantly decrease tumor growth and volume in tumor-bearing mice that received nanoceria for four weeks. Cerium oxide nanoparticle showed potential anti-cancer properties against fibrosarcoma.

Brevinin-2R-linked polyethylenimine as a promising hybrid nano-gene-delivery vector

OBJECTIVES

Polyethylenimine (PEI) is one of the most widely used polymers in gene delivery. The aim of this study was to modify PEI by replacing some of its primary amines with Brevinin 2R (BR-2R) peptide in order to increase the efficiency of gene delivery.

MATERIALS AND METHODS

Polyethylenimine was modified by BR-2R peptide by two different approaches; A) conjugation methods including (І) using succinimidyl 3-(2-pyridyldithio) propionate (SPDP), (П) EDC/NHS protocol and (ПІ) EDC/NHS+6-bromohexanoic acid protocol, and B) physical interaction method. The modified polymers were characterized for their ability of plasmid condensation, number of primary amines, size and zeta potential. The transfection efficiency and cytotoxicity were evaluated on HEK293, L929, WEHI164 and Neuro2A cell lines by green fluorescent protein (GFP)-based plasmid (pGFP) reporter gene and viability assays, respectively. Apoptosis induction ability was also evaluated via PI/Annexin V assay.

RESULTS

Polyplex had size and zeta potential between 200-270 nm and +21.5- +28.4 mV, respectively. All vectors were able to condense plasmid DNA in C/P=4 (carrier-plasmid ratio). Transfection results on the Neuro2A cell line showed that the vector containing the BR-2R peptide, which was synthesized using EDC-NHS protocol had the best transfection efficiency.

CONCLUSION

Our results showed that conjugation of Brevinin 2R as cell penetrating peptide to polyethyleneimine could enhance the transfection ability of the polymer.

MicroRNAs as important regulators of the NLRP3 inflammasome

Inflammasomes are a group of cytosolic multi-protein signaling complexes that regulate maturation of the interleukin (IL)-1 family cytokines IL-1β and IL-18 through activation of inflammatory caspase-1. The NOD-like receptor family, pyrin domain containing 3 (NLRP3) inflammasome is the best characterized and consists of several key components that are assembled and activated in response to different endogenous and exogenous signals. The NLRP3 inflammasome is common to a number of human inflammatory diseases and its targeting may lead to novel anti-inflammatory therapy. NLRP3 inflammasome activation is tightly regulated by different mechanisms especially post-transcriptional modulation via microRNAs (miRNA). MicroRNAs are small endogenous noncoding RNAs that are 21-23 nucleotides in length and control the expression of various genes through binding to the 3'-untranslated regions of the respective mRNA and subsequent post-transcriptional regulation. MicroRNAs have recently been recognized as crucial regulators of the NLRP3 inflammasome. In this review, we summarize the current understanding of the role of miRNAs in the regulation of NLRP3 inflammasome complexes and their impact on the pathogenesis of inflammatory disease processes.

Evaluation and comparison of cytotoxicity, genotoxicity, and apoptotic effects of poly-l-lysine/plasmid DNA micro- and nanoparticles

The principal impediment to gene therapy is the development of efficient, nontoxic gene carriers that can handle and deliver foreign genetic materials into various cell types, including healthy and cancerous cells. Poly-l-lysine (PLL) polymers are one of the most favorable gene carriers among nonviral vectors, and PLL had low transfection and safety issues. The purpose of this study was to measure cellular toxicity, DNA damage, and apoptotic effects of PLL nanoparticles. Neuro2A mammalian cells were cultured and exposed to PLL/DNA complexes at different polymer/DNA ratios ( C/ P ratio 2 and 6) for 24 h. To evaluate metabolic activity, genotoxicity, and apoptotic influences of PLL nanoparticle, the following experimental methods were employed, in order: 3-(4,5-Dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT), DNA damage (COMET analysis) assay, and sub-G1 peak apoptosis assay. Our data indicate that toxicity is concentration dependent and a high concentration of polymer declined the metabolic activity. In addition, largest complexes ( C/ P 6 in HEPES buffered saline buffer) have slighter negative impact on metabolic activity. In agreement with our cytotoxicity data, apoptotic assay result represented that increase in size of PLL/DNA complexes decrease the number of apoptotic cells. Also, there was a remarkable increase in percent tail DNA of Neuro2A cells treated with higher concentration of PLL and its polyplexes. The present study demonstrated that PLL/DNA complexes caused cytotoxic, apoptotic, and genotoxic effects in a dose-dependent and weight ratio-dependent manner, which also affected the size of polyplexes.

Synthesis, characterization and evaluation of transfection efficiency of dexamethasone conjugated poly(propyleneimine) nanocarriers for gene delivery#. Pharm Biol 2018;56:519-527. [PMID: 30270694 PMCID: PMC6171438 DOI: 10.1080/13880209.2018.1517183]

CONTEXT

Polypropylenimine (PPI), a cationic dendrimer with defined structure and positive surface charge, is a potent non-viral vector. Dexamethasone (Dexa) conveys to the nucleus through interaction with its intracellular receptor.

OBJECTIVE

This study develops efficient and non-toxic gene carriers through conjugation of Dexa at various percentages (5, 10 and 20%) to the fourth and the fifth generation PPIs (PPIG4s and PPIG5s).

MATERIALS AND METHODS

The 21-OH group of Dexa (0.536 mmol) was modified with methanesulfonyl chloride (0.644 mmol) to activate it (Dexa-mesylate), and then it was conjugated to PPIs using Traut's reagent. After dialysis (48 h) and lyophilization, the physicochemical characteristics of products (PPI-Dexa) including zeta potential, size, buffering capacity and DNA condensing capability were investigated and compared with unmodified PPIs. Moreover, the cytotoxicity and transfection activity of the Dexa-modified PPIs were assessed using Neuro2A cells.

RESULTS

Transfection of PPIG4 was close to PEI 25 kDa. Although the addition of Dexa to PPIG4s did not improve their transfection, their cytotoxicity was improved; especially in the carrier to DNA weight ratios (C/P) of one and two. The Dexa conjugation to PPIG5s enhanced their transfection at C/P ratio of one in both 5% (1.3-fold) and 10% (1.6-fold) Dexa grafting, of which the best result was observed in PPIG5-Dexa 10% at C/P ratio of one.

DISCUSSION AND CONCLUSIONS

The modification of PPIs with Dexa is a promising approach to improve their cytotoxicity and transfection. The higher optimization of physicochemical characteristics, the better cell transfection and toxicity will be achieved.

Exosome-mediated delivery of functionally active miRNA-142-3p inhibitor reduces tumorigenicity of breast cancer in vitro and in vivo

Background

Exosomes, widely recognized natural nanovesicles, represent one of the recently discovered modes of intercellular communication due to their ability to transmit crucial cellular information that can be engineered to have robust delivery and targeting capacity. MiR-142-3p, one of the upregulated microRNAs (miRNAs) in many types of breast cancer, activates the canonical Wnt signaling pathway and transactivates the miR-150 expression, and results in the hyperproliferation of cancer cells in vitro and mammary glands in vivo.

Materials and methods

In this study, we exploited the exosomes isolated from bone marrow-derived mesenchymal stem cells (MSCs-Exo) to deliver LNA (locked nucleic acid)-modified anti-miR-142-3p oligonucleotides to suppress the expression level of miR-142-3p and miR-150 in 4T1 and TUBO breast cancer cell lines.

Results

The in vitro results showed that the MSCs-Exo can efficiently deliver anti-miR-142-3p to reduce the miR-142-3p and miR-150 levels and increase the transcription of the regulatory target genes, APC and P2X7R. We also evaluated in vivo distribution of the MSCs-Exo in tumor-bearing mice. The in vivo result indicated that MSCs-Exo can penetrate the tumor site and are suitable nanovehicles to deliver the inhibitory oligonucleotides into the tumor tissues to downregulate the expression levels of miR-142-3p and miR-150.

Conclusion

We showed that MSCs-derived exosomes could be used as a feasible nanovehicle to deliver drug molecules like LNA-anti-miR-142-3p in both in vitro and in vivo studies.

Sequential or multiplex electrochemical detection of miRs based on the p19 function relative to three sandwiches of different structural hybrids on the liposomal sensor

In this work, we designed a liposomal electrochemical sensor with DOTAP-DOPE liposome, chimeric probes, p19 as a caliper molecule, and the competitor structural hybrid (just RNA) for detection of three micro-RNAs in one SPCE/GNP electrode. The sensor is stabled when the cationic spherical DOTAP-DOPE liposomes sandwich with hybrids of the different sandwiched of probes (T-M-linear, Stem) and 21-124a-221miRs. With the addition of P19, in the presence of a sandwiched competitor (T-linear/21miR), the system is stable (ON) and is shut off in the presence of structural sandwiched hydrides of M-linear+124a/Stem+221 miR due to the lack of adequate access to segments of RNA-miRs of chimeric probes. For the first time in this study, three probes were sandwiched on the separate liposome for sequential identification of 21-124a-221 or multiplex detection of miRs (221 or 124a with 21) with high specificity and sensitivity (as low as 0.1 fM). Electrochemical impedance (EIS) were performed for sensing three miRs in PBS containing 1 mM [Fe(CN)6]^-3/-4 which DOTAP-DOPE liposome acted as an enhancing intermediate layer in the electrochemical reactions. Transmission Electron Microscopy (TEM)), Atomic Force Microscopy (AFM), Dynamic Light Scattering (DLS) and Ultraviolet-Visible (UV) spectroscopic techniques are used to understand the interactions between the DOPE-DOTAP, AuNP, different probes, miRs and p19.

Evaluation of leishmanicidal effect of Euphorbia petiolata extract by in vivo anti-leishmanial assay using promastigotes of Leishmania major

OBJECTIVE

The extract of different species of Euphorbia has been successfully used as a remedy for treatment of cutaneous leishmaniasis. The aim of this study was to assess the in vitro leishmanicidal effect of Euphorbia petiolata (E. petiolata) extract.

MATERIALS AND METHODS

Ethanolic percolated and methanolic Soxhlet extract of E. petiolata on promastigotes of L. major at different concentrations of extracts, one positive control group and one negative control group as well as 1 solvent control were prepared and placed in 24-well plates that contained 40,000 parasites/well. Afterwards, plates were incubated at 25 ˚C for six days and number of parasites in each well were determined on days 2, 4 and 6 of the experiment.

RESULTS

Both percolated and Soxhlet extracts in methanol and DMSO solvents had significant effects (equal to that of amphotericin B) on promastigote form of parasite at the concentration of 1 mg/ml. At lower concentrations, the extracts of E. petiolata had favorable leishmanicidal activity and killed L. major promastigotes dose-dependently.

CONCLUSION

Our results support the possibility of E. petiolata extracts application as an anti-leishmanial agent with similar effects to amphotericin B.

Green synthesis of labeled CeO2 nanoparticles with 99mTc and its biodistribution evaluation in mice

AIMS

The in vivo targeted diagnostic applications of biosynthetic Cerium oxide nanoparticles (CeO₂-NPs), prepared by applying chitosan as a stabilizer, was explored by evaluating the cytotoxicity through MTT assay on WEHI 164 cell line, the Hemolytic activity of CeO₂-NPs and biodistribution in rats.

MAIN METHODS

The CeO₂-NPs were characterized through the use of TGA/DTG, PXRD, FESEM, FTIR, and UV-Vis spectroscopy. The biodistribution of CeO₂-NPs were determined by directly labeled nanoparticles with Technetium-99 m (99mTc) radioisotope (99mTc-CeO₂-NPs). The labeling efficiency and stability of 99mTc-CeO₂-NPs were also measured with Instant Thin Layer Chromatography (ITLC) method. The saturation study was investigated by 1 mCi of 99mTc-CeO₂-NPs using different concentrations of WEHI 164 cells after 4 h of incubation. In vivo biodistribution study was performed by intravenous injection of 600 μCi/200 μL 99mTc-CeO₂-NPs through rat's tail.

KEY FINDINGS

CeO₂-NPs seemed to have a low cytotoxic effect on WEHI 164 cell line and did not result in hemolysis. The biodistribution of CeO₂-NPs has shown that a huge amount of 99mTc-CeO₂-NPs was amassed in the living human organs, including liver, lung, spleen, stomach, and thyroid which shows the in vivo stability of the labeled conjugate. Herein, we have developed a facile, economical, and greener synthetic procedure applying Chitosan template. This green approach is comparable to conventional methods that utilize hazardous materials which are would be a suitable alternative to circumvent synthetic issues related to these materials.

SIGNIFICANCE

The bio-applications of nano-sized CeO₂-NPs were explored to find new horizon to use nanotechnology as the diagnostic tool.

Biological Properties, Current Applications and Potential Therapeautic Applications of Brevinin Peptide Superfamily

The Brevinin peptides are antimicrobial agents obtained from frog skin secretions. Brevinin-2R has attracted many attentions due to its very low hemolytic activity, cationic property, and high affinity to cancer cells. Moreover, it has shown little toxicity against normal mammalian cells, while having killed several tumor cell lines by activation of lysosome-mitochondrial death pathway. In this review, we introduced the Brevinin superfamily with a focus on its therapeutic applications. Next, some unique properties of Brevinins were briefly discussed, including their ability to stimulate insulin secretion, dendritic cell maturation, and wound healing. In this context, we also provide information about the decoration of nanoparticles, such as cerium nano-oxide, by Brevinins. Finally, we addressed their potential for anti-tumor and drug design applications.

The therapeutic potential of human adipose-derived mesenchymal stem cells producing CXCL10 in a mouse melanoma lung metastasis model

Interferon γ-induced protein 10 kDa (IP-10) is a potent chemoattractant and has been suggested to enhance antitumor activity and mediate tumor regression through multiple mechanisms of action. Multiple lines of evidence have indicated that genetically-modified adult stem cells represent a potential source for cell-based cancer therapy. In the current study, we assessed therapeutic potential of human adipose derived mesenchymal stem cells (hADSC) genetically-modified to express IP-10 for the treatment of lung metastasis in an immunocompetent mouse model of metastatic melanoma. A Piggybac vector encoding IP-10 was employed to transfect hADSC ex vivo. Expression and bioactivity of the transgenic protein from hADSCs expressing IP-10 were confirmed prior to in vivo studies. Our results indicated that hADSCs expressing IP-10 could inhibit the growth of B16F10 melanoma cells and significantly prolonged survival. Immunohistochemistry analysis, TUNEL assay and western blot analysis indicated that hADSCs expressing IP-10 inhibited tumor cell growth, hindered tumor infiltration of Tregs, restricted angiogenesis and significantly prolonged survival. In conclusion, our results demonstrated that targeting metastatic tumor sites by hADSC expressing IP-10 could reduce melanoma tumor growth and lung metastasis.

Electrochemical Sensor for Detection of miRs Based on the Differential Effect of Competitive Structures in The p19 Function

The present study aim to design a liposomal electrochemical sensor using 1, 2-dioleoyl-3-trimethylammoniumpropane (DOTAP) and dioleoylphosphatidylethanolamine(DOPE), chimeric probes and p19, it has been considered as a caliper molecule as well. Also the competitor structural hybrid (RNA) was used to detect three types of miRs in one screen printed electrode modified by gold nanoparticle (SCPE/GNP). In this purpose, the sensor signal stabilized when the cationic DOTAP-DOPE with hybrids of the chimeric probes (Stem, M-linear) sandwiched in order to detect 221-124a miRs. Given the lack of accessibility to RNA-miRs segments of chimeric probes, p19 inhibited the electrochemical reaction and shifted signal to off. After that p19 connected with the free hybrid of T-linear/21miR (just RNA) as competing for structure and the signal was shifted to ON, again. In this study, the electrochemical measurements were performed between the potentials at -0.4 V and +0.4 V with 1 mM [Fe(CN)6]-3-/4 which DOTAP-DOPE acted as an enhancer layer in the electrostatically reaction. This sensor determines as low as 0.4 fM of miRNA with high selectivity and specificity for sequential analysis of 124a-221-21 miRs in just 2 h.

Viral vector mimicking and nucleus targeted nanoparticles based on dexamethasone polyethylenimine nanoliposomes: Preparation and evaluation of transfection efficiency

Non-viral vectors such as polymers and liposomes have been used as gene delivery systems to overcome intrinsic problems of viral vectors, but transfection efficiency of these vectors is lower than viral vectors. In the present study, we tried to design non-viral gene delivery vectors that mimic the viral vectors using the benefits of both cationic liposomes and cationic polymer vectors along with targeting glucocorticoid receptors to enhance cellular trafficking of vectors. Cationic liposomes containing DOTAP and cholesterol were prepared by thin-film hydration following extrusion method. Dexamethasone mesylate was synthesized and then conjugated to polyethylenimine through a one-step reaction. A novel gene delivery system, Lipopolyplex was developed by premixing liposome and different molecular weight of bPEI-Dexa as carriers followed by addition of plasmid at three different carrier/pDNA (C/P) weight ratios. The resulted complexes were characterized for their size, zeta potential and ability of DNA condensation. Transfection efficiency of vectors in neuro2A was determined by Luciferase reporter gene assay. Also, the toxicity of gene carriers was investigated in this cell line. Mean particle size of prepared complexes was less than 200 nm and there was no significant difference in their size by increasing the molecular weight of PEIs. All complexes had positive surface charge. Complete condensation of DNA was occurred at C/P ratio of one for all complexes. Lipopolyplexes were more efficient than polyplexes and lipoplexes alone and transfection efficiency was improved by adding dexamethasone. The complexes containing liposome, PEI 10 kDa and dexamethasone (PEI10:Lipo:Dexa(0.05)) had the highest transfection activity about 40-fold and 3.6-fold in comparison with PEI10 and PEI10:Lipo, respectively. Furthermore, the non-viral vectors described in this study showed low cytotoxicity. The results of this study confirmed that PEI in combination with liposome forms lipopolyplex with low toxicity and enhanced transfection efficiency. Moreover, using dexamethasone, in combination with lipopolyplex might be useful to increase the gene delivery potential of these lipopolyplexes.