Folding membrane proteins in vitro: A table and some comments

Three-stage model of helical membrane protein folding: Role of membrane-water interface as the intermediate stage vestibule for TM helices during their in membrano assembly

Integral membrane proteins (MPs) are dominated by transmembrane α-helical (TMH) proteins playing critical roles in cellular signaling processes. These proteins display a wide range of sizes from one TMH domain to at least 26 TMH domains and diverse structural folds. A common feature of most of these folds is the TM orientation of the helical domains and the approximately parallel packing of these domains into helical bundles of varying stability, however, it has been challenging to study the folding of these proteins experimentally. The contribution of helix stabilization in membrane and interface to the folding energy landscape are investigated here for the full range of TMH protein sizes containing 1 TM domain (1-TMH protein) to 24 TM domains (24-TMH protein) for all TMH proteins with available structures using structural bioinformatics based hydropathy analysis. The TM helix insertion stabilization energies from Water to membrane-water Interface (WAT→INT energies) are on average half of those insertion energies from water to transmembrane orientation (WAT→TM energies) for the whole polytopic helical membrane proteome (1-TMH to 24-TMH proteins). This suggests a potentially dominant role of the membrane-water interface as a viable holding vestibule for the TM helices during their release from the translocon. This provides proteome-level evidence for the broadly applicable four-step thermodynamic framework by White and co-workers as well as a natural extension of Popot and Engelman's original two-stage model of helical MP folding to a three-stage model, where, in the new intermediate stage, the membrane-water interface acts as a holding vestibule for the translated TM helices, reconciling the interface's critical role in MP folding seen in many previous studies. Support for this model is provided by showing the stability of hydrophobic TM helices at the membrane-water interface through several microsecond long molecular dynamics simulations of five hydrophobic helical domains and a helical hairpin pre-folded from the ribosomal exit vestibule.

Transmembrane β-barrel proteins of bacteria: From structure to function

The outer membrane of Gram-negative bacteria is a specialized organelle conferring protection to the cell against various environmental stresses and resistance to many harmful compounds. The outer membrane has a number of unique features, including an asymmetric lipid bilayer, the presence of lipopolysaccharides and an individual proteome. The vast majority of the integral transmembrane proteins in the outer membrane belongs to the family of β-barrel proteins. These evolutionarily related proteins share a cylindrical, anti-parallel β-sheet core fold spanning the outer membrane. The loops and accessory domains attached to the β-barrel allow for a remarkable versatility in function for these proteins, ranging from diffusion pores and transporters to enzymes and adhesins. We summarize the current knowledge on β-barrel structure and folding and give an overview of their functions, evolution, and potential as drug targets.

Ion-dependent structure, dynamics, and allosteric coupling in a non-selective cation channel

The selectivity filter (SF) determines which ions are efficiently conducted through ion channel pores. NaK is a non-selective cation channel that conducts Na⁺ and K⁺ with equal efficiency. Crystal structures of NaK suggested a rigid SF structure, but later solid-state NMR and MD simulations questioned this interpretation. Here, we use solution NMR to characterize how bound Na⁺ vs. K⁺ affects NaK SF structure and dynamics. We find that the extracellular end of the SF is flexible on the ps-ns timescale regardless of bound ion. On a slower timescale, we observe a structural change between the Na⁺ and K⁺-bound states, accompanied by increased structural heterogeneity in Na⁺. We also show direct evidence that the SF structure is communicated to the pore via I88 on the M2 helix. These results support a dynamic SF with multiple conformations involved in non-selective conduction. Our data also demonstrate allosteric coupling between the SF and pore-lining helices in a non-selective cation channel that is analogous to the allosteric coupling previously demonstrated for K⁺-selective channels, supporting the generality of this model.

NaK is a bacterial non-selective cation channel. Here, the authors use solution NMR to show that selectivity filter (SF) in NaK is dynamic, with structural differences between the Na+ and K + -bound states. The conformation of the SF is communicated to the pore-lining helices similarly as in the K + -selective channels.

Principles and Methods in Computational Membrane Protein Design

After decades of progress in computational protein design, the design of proteins folding and functioning in lipid membranes appears today as the next frontier. Some notable successes in the de novo design of simplified model membrane protein systems have helped articulate fundamental principles of protein folding, architecture and interaction in the hydrophobic lipid environment. These principles are reviewed here, together with the computational methods and approaches that were used to identify them. We provide an overview of the methodological innovations in the generation of new protein structures and functions and in the development of membrane-specific energy functions. We highlight the opportunities offered by new machine learning approaches applied to protein design, and by new experimental characterization techniques applied to membrane proteins. Although membrane protein design is in its infancy, it appears more reachable than previously thought.

Electrophysiology on Channel-Forming Proteins in Artificial Lipid Bilayers: Next-Generation Instrumentation for Multiple Recordings in Parallel

Artificial lipid bilayers have been used for several decades to study channel-forming pores and ion channels in membranes. Until recently, the classical two-chamber setups have been primarily used for studying the biophysical properties of pore forming proteins. Within the last 10 years, instruments for automated lipid bilayer measurements have been developed and are now commercially available. This chapter focuses on protein purification and reconstitution of channel-forming proteins into lipid bilayers using a classic setup and on the commercially available systems, the Orbit mini and Orbit 16.

De novo design of transmembrane β barrels

Transmembrane β-barrel proteins (TMBs) are of great interest for single-molecule analytical technologies because they can spontaneously fold and insert into membranes and form stable pores, but the range of pore properties that can be achieved by repurposing natural TMBs is limited. We leverage the power of de novo computational design coupled with a "hypothesis, design, and test" approach to determine TMB design principles, notably, the importance of negative design to slow β-sheet assembly. We design new eight-stranded TMBs, with no homology to known TMBs, that insert and fold reversibly into synthetic lipid membranes and have nuclear magnetic resonance and x-ray crystal structures very similar to the computational models. These advances should enable the custom design of pores for a wide range of applications.

High-Yield Preparation of Outer Membrane Protein Efflux Pumps by in Vitro Refolding is Concentration Dependent

Overexpression of tripartite efflux pump systems in gram-negative bacteria is a principal component of antibiotic resistance. High-yield purification of the outer membrane component of these systems will enable biochemical and structural interrogation of their mechanisms of action and allow testing of compounds that target them. However, preparation of these proteins is typically hampered by low yields, requiring laborious large-scale efforts. If refolding conditions can be found, refolding these proteins from inclusion bodies can lead to increased yields as compared to membrane isolations. A classical method for refolding outer membrane proteins involves unfolding inclusion bodies in urea followed by refolding in lipid or detergent micelles. However, that method has not yet been successful in refolding tripartite efflux pump TolC. Here, we find that refolding TolC from inclusion bodies requires an additional oligomerization enhancing step of sample concentration. We show that by our method of refolding, homotrimeric TolC remains folded in SDS-PAGE, retains binding to an endogenous ligand, and recapitulates the known crystal structure by single particle cryoEM analysis. We find that TolC refolding is concentration dependent. We then extended our method to refolding CmeC, a homologous protein from Campylobacter jejuni, and find that concentration-dependent oligomerization is a general feature of these systems. Because outer membrane efflux pump components are ubiquitous across gram-negative species, we anticipate that incorporating a concentration step in refolding protocols will promote correct refolding allowing for reliable, high-yield preparation of this family of proteins.

Folding of β-Barrel Membrane Proteins into Lipid Membranes by Site-Directed Fluorescence Spectroscopy

Protein-lipid interactions are important for folding and membrane insertion of integral membrane proteins that are composed either of α-helical or of β-barrel structure in their transmembrane domains. While α-helical transmembrane proteins fold co-translationally while they are synthesized by a ribosome, β-barrel transmembrane proteins (β-TMPs) fold and insert posttranslationally-in bacteria after translocation across the cytoplasmic membrane, in cell organelles of eukaryotes after import across the outer membrane of the organelle. β-TMPs can be unfolded in aqueous solutions of chaotropic denaturants like urea and spontaneously refold upon denaturant dilution in the presence of preformed lipid bilayers. This facilitates studies on lipid interactions during folding into lipid bilayers. For several β-TMPs, the kinetics of folding has been reported as strongly dependent on protein-lipid interactions. The kinetics of adsorption/insertion and folding of β-TMPs can be monitored by fluorescence spectroscopy. These fluorescence methods are even more powerful when combined with site-directed mutagenesis for the preparation of mutants of a β-TMP that are site-specifically labeled with a fluorophore or a fluorophore and fluorescence quencher or fluorescence resonance energy acceptor. Single tryptophan or single cysteine mutants of the β-TMP allow for the investigation of local protein-lipid interactions, at specific regions within the protein. To examine the structure formation of β-TMPs in a lipid environment, fluorescence spectroscopy has been used for double mutants of β-TMPs that contain a fluorescent tryptophan and a spin-label, covalently attached to a cysteine as a fluorescence quencher. The sites of mutation are selected so that the tryptophan is in close proximity to the quencher at the cysteine only when the β-TMP is folded. In a folding experiment, the evolution of fluorescence quenching as a function of time at specific sites within the protein can provide important information on the folding mechanism of the β-TMP. Here, we report protocols to examine membrane protein folding for two β-TMPs in a lipid environment, the outer membrane protein A from Escherichia coli, OmpA, and the voltage-dependent anion-selective channel, human isoform 1, hVDAC1, from mitochondria.

Interfacing the Cell with "Biomimetic Membrane Proteins"

Integral membrane proteins mediate a myriad of cellular processes and are the target of many therapeutic drugs. Enhancement and extension of the functional scope of membrane proteins can be realized by membrane incorporation of engineered nanoparticles designed for specific diagnostic and therapeutic applications. In contrast to hydrophobic insertion of small amphiphilic molecules, delivery and membrane incorporation of particles on the nanometric scale poses a crucial barrier for technological development. In this perspective, the transformative potential of biomimetic membrane proteins (BMPs), current state of the art, and the barriers that need to be overcome in order to advance the field are discussed.

Folding and Misfolding of Human Membrane Proteins in Health and Disease: From Single Molecules to Cellular Proteostasis

Advances over the past 25 years have revealed much about how the structural properties of membranes and associated proteins are linked to the thermodynamics and kinetics of membrane protein (MP) folding. At the same time biochemical progress has outlined how cellular proteostasis networks mediate MP folding and manage misfolding in the cell. When combined with results from genomic sequencing, these studies have established paradigms for how MP folding and misfolding are linked to the molecular etiologies of a variety of diseases. This emerging framework has paved the way for the development of a new class of small molecule "pharmacological chaperones" that bind to and stabilize misfolded MP variants, some of which are now in clinical use. In this review, we comprehensively outline current perspectives on the folding and misfolding of integral MPs as well as the mechanisms of cellular MP quality control. Based on these perspectives, we highlight new opportunities for innovations that bridge our molecular understanding of the energetics of MP folding with the nuanced complexity of biological systems. Given the many linkages between MP misfolding and human disease, we also examine some of the exciting opportunities to leverage these advances to address emerging challenges in the development of therapeutics and precision medicine.

NMR analysis of GPCR conformational landscapes and dynamics

Understanding the signal transduction mechanism mediated by the G Protein-Coupled Receptors (GPCRs) in eukaryote cells represents one of the main issues in modern biology. At the molecular level, various biophysical approaches have provided important insights on the functional plasticity of these complex allosteric machines. In this context, X-ray crystal structures published during the last decade represent a major breakthrough in GPCR structural biology, delivering important information on the activation process of these receptors through the description of the three-dimensional organization of their active and inactive states. In complement to crystals and cryo-electronic microscopy structures, information on the probability of existence of different GPCR conformations and the dynamic barriers separating those structural sub-states is required to better understand GPCR function. Among the panel of techniques available, nuclear magnetic resonance (NMR) spectroscopy represents a powerful tool to characterize both conformational landscapes and dynamics. Here, we will outline the potential of NMR to address such biological questions, and we will illustrate the functional insights that NMR has brought in the field of GPCRs in the recent years.

A facile approach for the in vitro assembly of multimeric membrane transport proteins

Membrane proteins such as ion channels and transporters are frequently homomeric. The homomeric nature raises important questions regarding coupling between subunits and complicates the application of techniques such as FRET or DEER spectroscopy. These challenges can be overcome if the subunits of a homomeric protein can be independently modified for functional or spectroscopic studies. Here, we describe a general approach for in vitro assembly that can be used for the generation of heteromeric variants of homomeric membrane proteins. We establish the approach using Glt_Ph, a glutamate transporter homolog that is trimeric in the native state. We use heteromeric Glt_Ph transporters to directly demonstrate the lack of coupling in substrate binding and demonstrate how heteromeric transporters considerably simplify the application of DEER spectroscopy. Further, we demonstrate the general applicability of this approach by carrying out the in vitro assembly of VcINDY, a Na⁺-coupled succinate transporter and CLC-ec1, a Cl^-/H⁺ antiporter.

Folding and stabilizing membrane proteins in amphipol A8-35

Membrane proteins (MPs) are important pharmacological targets because of their involvement in many essential cellular processes whose dysfunction can lead to a large variety of diseases. A detailed knowledge of the structure of MPs and the molecular mechanisms of their activity is essential to the design of new therapeutic agents. However, studying MPs in vitro is challenging, because it generally implies their overexpression under a functional form, followed by their extraction from membranes and purification. Targeting an overexpressed MP to a membrane is often toxic and expression yields tend to be limited. One alternative is the formation of inclusion bodies (IBs) in the cytosol of the cell, from which MPs need then to be folded to their native conformation before structural and functional analysis can be contemplated. Folding MPs targeted to IBs is a difficult task. Specially designed amphipathic polymers called 'amphipols' (APols), which have been initially developed with the view of improving the stability of MPs in aqueous solutions compared to detergents, can be used to fold both α-helical and β-barrel MPs. APols represent an interesting novel amphipathic medium, in which high folding yields can be achieved. In this review, the properties of APol A8-35 and of the complexes they form with MPs are summarized. An overview of the most important studies reported so far using A8-35 to fold MPs is presented. Finally, from a practical point of view, a detailed description of the folding and trapping methods is given.

Illuminating the Energy Landscape of GPCRs: The Key Contribution of Solution-State NMR Associated with Escherichia coli as an Expression Host

Conformational dynamics of GPCRs are central to their function but are difficult to explore at the atomic scale. Solution-state NMR has provided the major contribution in that area of study during the past decade, despite nonoptimized labeling schemes due to the use of insect cells and, to a lesser extent, yeast as the main expression hosts. Indeed, the most efficient isotope-labeling scheme ever to address energy landscape issues for large proteins or protein complexes relies on the use of ¹³CH₃ probes immersed in a perdeuterated dipolar environment, which is essentially out of reach of eukaryotic expression systems. In contrast, although its contribution has been underestimated because of technical issues, Escherichia coli is by far the best-adapted host for such labeling. As it is now tightly controlled, we show in this review that bacterial expression can provide an NMR spectral resolution never achieved in the GPCR field.

Protein labeling strategies for liquid-state NMR spectroscopy using cell-free synthesis

Preparation of a protein sample for liquid-state nuclear magnetic resonance (NMR) spectroscopy analysis requires optimization of many parameters. This review describes labeling strategies for obtaining assignments of protein resonances. Particular emphasis is placed on the advantages of cell-free protein production, which enables exclusive labeling of the protein of interest, thereby simplifying downstream processing steps and increasing the availability of different labeling strategies for a target protein. Furthermore, proteins can be synthesized in milligram yields, and the open nature of the cell-free system allows the addition of stabilizers, scrambling inhibitors or hydrophobic solubilization environments directly during the protein synthesis, which is especially beneficial for membrane proteins. Selective amino acid labeling of the protein of interest, the possibility of addressing scrambling issues and avoiding the need for labile amino acid precursors have been key factors in enabling the introduction of new assignment strategies based on different labeling schemes as well as on new pulse sequences. Combinatorial selective labeling methods have been developed to reduce the number of protein samples necessary to achieve a complete backbone assignment. Furthermore, selective labeling helps to decrease spectral overlap and overcome size limitations for solution NMR analysis of larger complexes, oligomers, intrinsically disordered proteins and membrane proteins.

Outer membrane protein folding from an energy landscape perspective

The cell envelope is essential for the survival of Gram-negative bacteria. This specialised membrane is densely packed with outer membrane proteins (OMPs), which perform a variety of functions. How OMPs fold into this crowded environment remains an open question. Here, we review current knowledge about OMP folding mechanisms in vitro and discuss how the need to fold to a stable native state has shaped their folding energy landscapes. We also highlight the role of chaperones and the β-barrel assembly machinery (BAM) in assisting OMP folding in vivo and discuss proposed mechanisms by which this fascinating machinery may catalyse OMP folding.

Transmembrane β-barrels: Evolution, folding and energetics

The biogenesis of transmembrane β-barrels (outer membrane proteins, or OMPs) is an elaborate multistep orchestration of the nascent polypeptide with translocases, barrel assembly machinery, and helper chaperone proteins. Several theories exist that describe the mechanism of chaperone-assisted OMP assembly in vivo and unassisted (spontaneous) folding in vitro. Structurally, OMPs of bacterial origin possess even-numbered strands, while mitochondrial β-barrels are even- and odd-stranded. Several underlying similarities between prokaryotic and eukaryotic β-barrels and their folding machinery are known; yet, the link in their evolutionary origin is unclear. While OMPs exhibit diversity in sequence and function, they share similar biophysical attributes and structure. Similarly, it is important to understand the intricate OMP assembly mechanism, particularly in eukaryotic β-barrels that have evolved to perform more complex functions. Here, we deliberate known facets of β-barrel evolution, folding, and stability, and attempt to highlight outstanding questions in β-barrel biogenesis and proteostasis.

Removable Backbone Modification Method for the Chemical Synthesis of Membrane Proteins

Chemical synthesis can produce water-soluble globular proteins bearing specifically designed modifications. These synthetic molecules have been used to study the biological functions of proteins and to improve the pharmacological properties of protein drugs. However, the above advances notwithstanding, membrane proteins (MPs), which comprise 20-30% of all proteins in the proteomes of most eukaryotic cells, remain elusive with regard to chemical synthesis. This difficulty stems from the strong hydrophobic character of MPs, which can cause considerable handling issues during ligation, purification, and characterization steps. Considerable efforts have been made to improve the solubility of transmembrane peptides for chemical ligation. These methods can be classified into two main categories: the manipulation of external factors and chemical modification of the peptide. This Account summarizes our research advances in the development of chemical modification especially the two generations of removable backbone modification (RBM) strategy for the chemical synthesis of MPs. In the first RBM generation, we install a removable modification group at the backbone amide of Gly within the transmembrane peptides. In the second RBM generation, the RBM group can be installed into all primary amino acid residues. The second RBM strategy combines the activated intramolecular O-to-N acyl transfer reaction, in which a phenyl group remains unprotected during the coupling process, which can play a catalytic role to generate the activated phenyl ester to assist in the formation of amide. The key feature of the RBM group is its switchable stability in trifluoroacetic acid. The stability of these backbone amide N-modifications toward TFA can be modified by regulating the electronic effects of phenol groups. The free phenol group is acylated to survive the TFA deprotection step, while the acyl phenyl ester will be quantitatively hydrolyzed in a neutral aqueous solution, and the free phenol group increases the electron density of the benzene ring to make the RBM labile to TFA. The transmembrane peptide segment bearing RBM groups behaves like a water-soluble peptide during fluorenylmethyloxycarbonyl based solid-phase peptide synthesis (Fmoc SPPS), ligation, purification, and characterization. The quantitative removal of the RBM group can be performed to obtain full-length MPs. The RBM strategy was used to prepare the core transmembrane domain Kir5.1[64-179] not readily accessible by recombinant protein expression, the influenza A virus M2 proton channel with phosphorylation, the cation-specific ion channel p7 from the hepatitis C virus with site-specific NMR isotope labels, and so on. The RBM method enables the practical engineering of small- to medium-sized MPs or membrane protein domains to address fundamental questions in the biochemical, biophysical, and pharmaceutical sciences.

NMR investigation of the isolated second voltage-sensing domain of human Nav1.4 channel

Voltage-gated Na⁺ channels are essential for the functioning of cardiovascular, muscular, and nervous systems. The α-subunit of eukaryotic Na⁺ channel consists of ~2000 amino acid residues and encloses 24 transmembrane (TM) helices, which form five membrane domains: four voltage-sensing (VSD) and one pore domain. The structural complexity significantly impedes recombinant production and structural studies of full-sized Na⁺ channels. Modular organization of voltage-gated channels gives an idea for studying of the isolated second VSD of human skeletal muscle Nav1.4 channel (VSD-II). Several variants of VSD-II (~150a.a., four TM helices) with different N- and C-termini were produced by cell-free expression. Screening of membrane mimetics revealed low stability of VSD-II samples in media containing phospholipids (bicelles, nanodiscs) associated with the aggregation of electrically neutral domain molecules. The almost complete resonance assignment of ¹³C,¹⁵N-labeled VSD-II was obtained in LPPG micelles. The secondary structure of VSD-II showed similarity with the structures of bacterial Na⁺ channels. The fragment of S4 TM helix between the first and second conserved Arg residues probably adopts 3₁₀-helical conformation. Water accessibility of S3 helix, observed by the Mn²⁺ titration, pointed to the formation of water-filled crevices in the micelle embedded VSD-II. ¹⁵N relaxation data revealed characteristic pattern of μs-ms time scale motions in the VSD-II regions sharing expected interhelical contacts. VSD-II demonstrated enhanced mobility at ps-ns time scale as compared to isolated VSDs of K⁺ channels. These results validate structural studies of isolated VSDs of Na⁺ channels and show possible pitfalls in application of this 'divide and conquer' approach.

Direct Monitoring of β-Sheet Formation in the Outer Membrane Protein TtoA Assisted by TtOmp85

Attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy was applied to investigate the folding of an outer membrane protein, TtoA, assisted by TtOmp85, both from the thermophilic eubacterium Thermus thermophilus. To directly monitor the formation of β-sheet structure in TtoA and to analyze the function of TtOmp85, we immobilized unfolded TtoA on an ATR crystal. Interaction with TtOmp85 initiated TtoA folding as shown by time-dependent spectra recorded during the folding process. Our ATR-FTIR experiments prove that TtOmp85 possesses specific functionality to assist β-sheet formation of TtoA. We demonstrate the potential of this spectroscopic approach to study the interaction of outer membrane proteins in vitro and in a time-resolved manner.

Combining in Vitro Folding with Cell Free Protein Synthesis for Membrane Protein Expression

Cell free protein synthesis (CFPS) has emerged as a promising methodology for protein expression. While polypeptide production is very reliable and efficient using CFPS, the correct cotranslational folding of membrane proteins during CFPS is still a challenge. In this contribution, we describe a two-step protocol in which the integral membrane protein is initially expressed by CFPS as a precipitate followed by an in vitro folding procedure using lipid vesicles for converting the protein precipitate to the correctly folded protein. We demonstrate the feasibility of using this approach for the K(+) channels KcsA and MVP and the amino acid transporter LeuT. We determine the crystal structure of the KcsA channel obtained by CFPS and in vitro folding to show the structural similarity to the cellular expressed KcsA channel and to establish the feasibility of using this two-step approach for membrane protein production for structural studies. Our studies show that the correct folding of these membrane proteins with complex topologies can take place in vitro without the involvement of the cellular machinery for membrane protein biogenesis. This indicates that the folding instructions for these complex membrane proteins are contained entirely within the protein sequence.

Membranes Do Not Tell Proteins How To Fold

Which properties of the membrane environment are essential for the folding and oligomerization of transmembrane proteins? Because the lipids that surround membrane proteins in situ spontaneously organize into bilayers, it may seem intuitive that interactions with the bilayer provide both hydrophobic and topological constraints that help the protein to achieve a stable and functional three-dimensional structure. However, one may wonder whether folding is actually driven by the membrane environment or whether the folded state just reflects an adaptation of integral proteins to the medium in which they function. Also, apart from the overall transmembrane orientation, might the asymmetry inherent in biosynthesis processes cause proteins to fold to out-of-equilibrium, metastable topologies? Which of the features of a bilayer are essential for membrane protein folding, and which are not? To which extent do translocons dictate transmembrane topologies? Recent data show that many membrane proteins fold and oligomerize very efficiently in media that bear little similarity to a membrane, casting doubt on the essentiality of many bilayer constraints. In the following discussion, we argue that some of the features of bilayers may contribute to protein folding, stability and regulation, but they are not required for the basic three-dimensional structure to be achieved. This idea, if correct, would imply that evolution has steered membrane proteins toward an accommodation to biosynthetic pathways and a good fit into their environment, but that their folding is not driven by the latter or dictated by insertion apparatuses. In other words, the three-dimensional structure of membrane proteins is essentially determined by intramolecular interactions and not by bilayer constraints and insertion pathways. Implications are discussed.

Folding of newly translated membrane protein CCR5 is assisted by the chaperonin GroEL-GroES

The in vitro folding of newly translated human CC chemokine receptor type 5 (CCR5), which belongs to the physiologically important family of G protein-coupled receptors (GPCRs), has been studied in a cell-free system supplemented with the surfactant Brij-35. The freshly synthesized CCR5 can spontaneously fold into its biologically active state but only slowly and inefficiently. However, on addition of the GroEL-GroES molecular chaperone system, the folding of the nascent CCR5 was significantly enhanced, as was the structural stability and functional expression of the soluble form of CCR5. The chaperonin GroEL was partially effective on its own, but for maximum efficiency both the GroEL and its GroES lid were necessary. These results are direct evidence for chaperone-assisted membrane protein folding and therefore demonstrate that GroEL-GroES may be implicated in the folding of membrane proteins.

Cooperative folding of a polytopic α-helical membrane protein involves a compact N-terminal nucleus and nonnative loops

Despite the ubiquity of helical membrane proteins in nature and their pharmacological importance, the mechanisms guiding their folding remain unclear. We performed kinetic folding and unfolding experiments on 69 mutants (engineered every 2-3 residues throughout the 178-residue transmembrane domain) of GlpG, a membrane-embedded rhomboid protease from Escherichia coli. The only clustering of significantly positive ϕ-values occurs at the cytosolic termini of transmembrane helices 1 and 2, which we identify as a compact nucleus. The three loops flanking these helices show a preponderance of negative ϕ-values, which are sometimes taken to be indicative of nonnative interactions in the transition state. Mutations in transmembrane helices 3-6 yielded predominantly ϕ-values near zero, indicating that this part of the protein has denatured-state-level structure in the transition state. We propose that loops 1-3 undergo conformational rearrangements to position the folding nucleus correctly, which then drives folding of the rest of the domain. A compact N-terminal nucleus is consistent with the vectorial nature of cotranslational membrane insertion found in vivo. The origin of the interactions in the transition state that lead to a large number of negative ϕ-values remains to be elucidated.

Folding of β-barrel membrane proteins in lipid bilayers - Unassisted and assisted folding and insertion

In cells, β-barrel membrane proteins are transported in unfolded form to an outer membrane into which they fold and insert. Model systems have been established to investigate the mechanisms of insertion and folding of these versatile proteins into detergent micelles, lipid bilayers and even synthetic amphipathic polymers. In these experiments, insertion into lipid membranes is initiated from unfolded forms that do not display residual β-sheet secondary structure. These studies therefore have allowed the investigation of membrane protein folding and insertion in great detail. Folding of β-barrel membrane proteins into lipid bilayers has been monitored from unfolded forms by dilution of chaotropic denaturants that keep the protein unfolded as well as from unfolded forms present in complexes with molecular chaperones from cells. This review is aimed to provide an overview of the principles and mechanisms observed for the folding of β-barrel transmembrane proteins into lipid bilayers, the importance of lipid-protein interactions and the function of molecular chaperones and folding assistants. This article is part of a Special Issue entitled: Lipid-protein interactions.

Folding and stability of integral membrane proteins in amphipols

Amphipols (APols) are a family of amphipathic polymers designed to keep transmembrane proteins (TMPs) soluble in aqueous solutions in the absence of detergent. APols have proven remarkably efficient at (i) stabilizing TMPs, as compared to detergent solutions, and (ii) folding them from a denatured state to a native, functional one. The underlying physical-chemical mechanisms are discussed.

Amphipols for each season

Amphipols (APols) are short amphipathic polymers that can substitute for detergents at the transmembrane surface of membrane proteins (MPs) and, thereby, keep them soluble in detergent free aqueous solutions. APol-trapped MPs are, as a rule, more stable biochemically than their detergent-solubilized counterparts. APols have proven useful to produce MPs, most noticeably by assisting their folding from the denatured state obtained after solubilizing MP inclusion bodies in either SDS or urea. They facilitate the handling in aqueous solution of fragile MPs for the purpose of proteomics, structural and functional studies, and therapeutics. Because APols can be chemically labeled or functionalized, and they form very stable complexes with MPs, they can also be used to functionalize those indirectly, which opens onto many novel applications. Following a brief recall of the properties of APols and MP/APol complexes, an update is provided of recent progress in these various fields.