Time-resolved chemiluminescence: a novel tool for improved emission sequence in stopped-flow analysis

Innovative design of a methodology for the simultaneous determination of compounds by kinetic-spectroscopy three-dimensional chemiluminescence

This report presents a novel methodology based in the quickly acquisition of full UV-vis range spectra combined with the joint determination of kinetic parameters and chemiluminescence signals. Then this technique allows obtaining three-dimensional chemiluminescence spectra profiles containing kinetic and spectroscopic information. That is especially useful for resolving mixtures of luminophors because of more analytical information for each analyte is available increasing the selectivity relative to conventional chemiluminescence methods. To accomplish this, a conventional Back-Thinned CCD detector is used and the three-dimensional chemiluminescence spectra is subsequently processed so that two-dimensional spectra with different trajectories can be obtained by dedicated software CLTotal. The potential of the proposed analytical methodology was assessed for the simultaneous determination of two polycyclic aromatic hydrocarbons. The chemiluminescent reaction between DNPO and hydrogen peroxide induced by their presence was used to record 3D spectra and the software CLTotal to subsequently construct linear variable-angle trajectories in the spectra, in order to obtain more selective 2D spectra facilitating the simultaneous determination of the analytes. The results of the statistical analysis testify to the usefulness of the proposed method for the intended purpose.

A high throughput gold nanoparticles chemiluminescence detection of opioid receptor antagonist naloxone hydrochloride

Background

The opioid antagonist agent naloxone hydrochloride (NLX) is a drug that has high affinity for opiate receptors but do not activate these receptors. Owing to the role of this drug to block the effects of exogenous administered opioids and endogenous released endorphians we can deduce the importance of developing sensitive analytical methods for detection of such drug. In the present study gold nanoparticles (AuNPs) was employed for enhancing the chemiluminescence (CL) signals arising from luminol-ferricyanide reaction in the presence of naloxone hydrochloride using sequential injection chemiluminescence analysis (SIA).

Method

In the present study gold nanoparticles (AuNPs) was employed for enhancing the chemiluminescence (CL) signals arising from luminol-ferricyanide reaction in the presence of naloxone hydrochloride using sequential injection chemiluminescence analysis (SIA).

Results

The developed method was examined under optimum experimental conditions and the obtained results revealed a linear relationship between the relative CL intensity and the investigated drug at a concentration range of 1.0×10⁻⁹-1.0×10⁻² mol L⁻¹, (r = 0.9993, n=9) with detection and quantification limits of 1.6×10⁻¹¹ and 1.0×10⁻⁹ mol L⁻¹, respectively. The relative standard deviation was 0.9%.

Conclusion

The proposed method was employed for the determination of the investigated drug in bulk powder, its pharmaceutical dosage forms and biological fluids. The interference of some metals and amino acids on the CL intensity was investigated. Also the interference of some related pharmacological action drugs was tested. The obtained results of the developed method were statistically treated and compared with those obtained from other reported methods.

Graphical Abstract

Kinetic-spectrometric three-dimensional chemiluminescence as an effective analytical tool. Application to the determination of benzo(a)pyrene

Kinetic and spectroscopic methods were used in combination in this work to develop a new analytical tool for use in chemiluminescence detection processes. Specifically, time-resolved chemiluminescence was used jointly with a stopped-flow assembly in order to monitor the chemiluminescence produced in the oxidation of bis(2,4-dinitrophenyl)oxalate (DNPO) by hydrogen peroxide in the presence of a polycyclic aromatic hydrocarbon. Recording of successive two-dimensional spectra during the emission process and treating the acquired spectral data with dedicated software allows the obtainment of three-dimensional chemiluminescence spectra, a result of the joint use of two analytical techniques. Thus, using a flow cell specifically designed for direct coupling to the charge-coupled device (CCD) detector increases the emission intensity without the need for fibre optics. Also, using dedicated software to process the acquired two-dimensional spectra affords a comprehensive kinetic and spectroscopic characterization of the chemiluminescence signal via the three-dimensional spectrum previously obtained. The analytical potential of this new tool was assessed by application to the chemiluminescent reaction between a peroxyoxalate and an oxidant (hydrogen peroxide); the reaction is induced by benzo(a)pyrene, which was used to determine this polycyclic aromatic hydrocarbon in an organic solvent. A linear calibration graph was obtained between 0.5 and 20 mg L(-1). The limit of detection found to be 3.97 μg L(-1) and a relative standard error of 0.64% and a relative standard deviation of 1.87% were obtained. The results reached testify to the usefulness of the proposed analytical tool for simple determinations and its potential for the resolution of complex mixtures or determinations in complex matrices.

Simultaneous determination of captopril and hydrochlorothiazide by time-resolved chemiluminescence with artificial neural network calibration

The combined use of chemometrics and chemiluminescence (CL) measurements, with the aid of the stopped-flow mixing technique, developed a simple time-resolved CL method for the simultaneous determination of captopril (CPL) and hydrochlorothiazide (HCT). The stopped-flow technique in a continuous-flow system was employed in this work in order to emphasize the kinetic differences between the two analytes in cerium (IV)-rhodamine 6G CL system. After the flow was stopped, an initial rise of CL signal was observed for HCT standards, while a direct decay of CL signal was obtained for CPL standards. The mixed CL signal was monitored and recorded on the whole process of continuousflow/stopped-flow, and the obtained data were processed by the chemometric approach of artificial neural network. The relative prediction error (RPE) of CPL and HCT was 5.9% and 8.7%, respectively. The recoveries of CPL and HCT in tablets were found to fall in the range between 95% and 106%. The proposed method was successfully applied to the simultaneous determination of CPL and HCT in a compound pharmaceutical formulation.

Acidic potassium permanganate as a chemiluminescence reagent—A review

A critical and comprehensive review of acidic potassium permanganate chemiluminescence is presented. This includes discussion on reaction conditions, the influence of enhancers such as polyphosphates, formaldehyde and sulfite, the relationship between analyte structure and chemiluminescence intensity, and the application of this chemistry to determine a wide variety of compounds, such as pharmaceuticals, biomolecules, antioxidants, illicit drugs, pesticides and pollutants. Previous proposals for the nature of the emitting species are re-evaluated in light of recent evidence.

Resolution of Ofloxacin–Ciprofloxacin and Ofloxacin–Norfloxacin Binary Mixtures by Flow-Injection Chemiluminescence in Combination with Partial Least Squares Multivariate Calibration

A flow-injection chemiluminescence (CL) method is described for the determination of ciprofloxacin (CIP), norfloxacin (NOR) and ofloxacin (OFL), commonly used antibiotics of the fluoroquinolones family. The method is based on the CL reaction of the fluoroquinolones with tris(2,2'-bipyridyl) ruthenium(II) and Ce (IV), in sulfuric acid medium. The maximum CL emission, given at 0.45 min for CIP, at 0.35 min for NOR and at 0.04 min for OFL, respectively, were measured, allowing the simple application of the proposed method to the routine analysis of the antibiotics. The methods were applied to the determination of CIP, NOR and OFL, in several pharmaceutical preparations, with very satisfactory results, and validated by a previously reported HPLC method. The time-resolved equipment allowed the measurement of the kinetic evolution of the chemiluminescence signals. In base to the differences in the kinetic behaviour of ofloxacin with respect to ciprofloxacin and norfloxacin, binary mixtures of the drugs were resolved by using the time-resolved chemiluminescence signals, in combination with first-order partial least-squares (PLS) multivariate calibration.

Development of time-resolved chemiluminescence for the determination of antu in river water, wheat, barley, and oat grain samples

A novel chemiluminescence method for the determination of antu has been developed based on the reaction between potassium permanganate in acid medium with this rat-poison in the presence of formaldehyde as an emission enhancer. The main feature of the system used is that the recording of the whole chemiluminescence intensity-vs-time profiles can be obtained, using the stopped-flow technique in a continuous-flow system. This enables the use of three quantitative parameters adjustable via software settings, one of them a typically kinetic parameter, such as rate of the light-decay reaction, and the others conventional parameters, such as maximum emission intensity and total emission area, which are proportional to the analyte concentration. The optimum chemical conditions for the chemiluminescence emission were investigated. The effect of common emission enhancers, such as formic acid, formaldehyde, glutaraldehyde, acetaldehyde, quinine, fluorescein, rhodamine B, and rhodamine 6G, was studied. The parameters selected were sulfuric acid 4.0 mol L(-)(1), permanganate 0.1 mmol L(-)(1), and formaldehyde 1.0 mol L(-)(1). The calibration graphs obtained with each one of the measurement parameters were linear for the concentration range from 0.05 to 3.00 microg mL(-)(1). The detection limits ranged from 0.005 to 0.010 microg mL(-)(1), and RSD values (n = 10) of 0.99-1.79% at a 0.30 microg mL(-)(1) concentration level and 1.71-2.22% at a 1.0 microg mL(-)(1) concentration level were obtained. The present chemiluminescence procedures were applied to the determination of antu in different kinds of samples, such as river water, wheat, barley, and oat grain samples. Recovery values not significantly different from the spiked amount were found for these determinations.