Application of supported liquid membrane probe for extraction and preconcentration of organotin compounds from environmental water samples

Hollow-Fiber Liquid-Phase Micro-Extraction Method for the Simultaneous Derivatization, Extraction, and Pre-concentration of Organotin Compounds from Packed Fruit Juices

Organotin compounds are widely employed as pesticides and fungicides in agriculture and as stabilizers for the industrial manufacture of polyvinyl chloride and other polymers. Accordingly, these endocrine disruptors can be found in a variety of foods and beverages. In the present study, we describe the optimization of a hollow-fiber liquid-phase micro-extraction approach for the simultaneous derivatization, extraction, and pre-concentration of butyltin species from commercial fruit juices with the aim of investigating their migration from the packaging. The best extraction efficiencies were achieved by using hexane as the acceptor solvent and a polypropylene fiber length of 2 cm, whereas the agitation speed, extraction temperature, and total extraction time were set at 1100 rpm, 25 ºC, and 10 min, respectively. Using these optimal conditions, the method was satisfactorily validated in terms of linearity (5–1000 µg L−1), limits of detection (0.8–1.8 µg L−1), recovery (80.5–92.1%), intraday precision (10.2–13.1%), inter-day precision (11.0–15.5%), matrix effect (83.2–91.8%), accuracy (85.2–95.2%), specificity, and carryover. The application of this technique to commercial samples obtained from a local market demonstrated that levels of organotin species in packed fruit juices are negligible, in agreement with the limits established by the European Food Safety Authority (0.14 mg of total organotin compounds per kg of food).

Large-Scale Membrane- and Lignin-Modified Adsorbent-Assisted Extraction and Preconcentration of Triazine Analogs and Aflatoxins

The large-scale simultaneous extraction and concentration of aqueous solutions of triazine analogs, and aflatoxins, through a hydrocarbon-based membrane (e.g., polyethylene, polyethylene/polypropylene copolymer) under ambient temperature and atmospheric pressure is reported. The subsequent adsorption of analyte in the extraction chamber over the lignin-modified silica gel facilitates the process by reducing the operating time. The maximum adsorption capacity values for triazine analogs and aflatoxins are mainly adsorption mechanism-dependent and were calculated to be 0.432 and 0.297 mg/10 mg, respectively. The permeation, and therefore the percentage of analyte extracted, ranges from 1% to almost 100%, and varies among the solvents examined. It is considered to be vapor pressure- and chemical polarity-dependent, and is thus highly affected by the nature and thickness of the membrane, the discrepancy in the solubility values of the analyte between the two liquid phases, and the amount of adsorbent used in the process. A dependence on the size of the analyte was observed in the adsorption capacity measurement, but not in the extraction process. The theoretical interaction simulation and FTIR data show that the planar aflatoxin molecule releases much more energy when facing toward the membrane molecule when approaching it, and the mechanism leading to the adsorption.

Speciation of alkyllead in aqueous samples with application of liquid membrane probe for extraction and preconcentration

Lead is known to be toxic, especially in its organic forms (organolead, OL). In the environment tetraalkyllead species are rapidly degraded by sunlight and atmospheric constituents like ozone or hydroxyl radicals. Such breakdown yields the soluble forms such as trialkyllead and dialkyllead and finally ionic lead species. The liquid membrane extraction probe (LMP) device has been developed and used as an extraction and preconcentration tool for the speciation analysis of organolead compounds by GC/MS. It allows analysis of OL species at low concentrations in complicated matrices of environmental samples. The effect of pH, stirring rate, and time that influence the extraction efficiency of OL extraction by the LMP method were optimized. The transformation of tetramethyllead in aqueous media at different concentrations of major ions K(+), Na(+), Ca(2+), Mg(2+), Cl(-), SO(4)(2-) and the application of LMP to environmental samples are presented. It was found that degradation of tetramethyllead takes between 24 and 37 days. The detection limit (LOD) of the method for all organolead species investigated is around 4.7 microg/L, with a limit of quantitation of 15 microg/L.

Current perspectives in analyte extraction strategies for tin and arsenic speciation

Nowadays, reliable and robust detectors can be considered standard laboratory instrumentation, which, for most of the elements provide quantitation limits in the lower ng/g range. Despite these advances in detector technology, sample preparation is by far the most important error source in modern analytical method development and can be judged as the "Achilles' heel" of any analytical process regarding reliability of the obtained results and time consumption. The aim of the present review is to highlight modern trends for tin and arsenic speciation, as these analytes can be considered as models for challenges in modern method development in this field. First background information, legislative aspects and current needs are elucidated. Then the role of sample treatment within the process of method development in speciation is discussed, followed by a presentation of modern extraction techniques, matching the requirements for arsenic and tin speciation analysis: to provide mild conditions in order to ensure species preservation, to improve species recovery, to enhance sample throughput and to be suitable for hyphenation with chromatographic separation systems. The review includes applications on tin and arsenic speciation, covering the period of 2001-2006.