Multisyringe flow injection analysis of stable and radioactive yttrium in water and biological samples

An overview of automated flow systems for total and isotopic analysis of strontium and yttrium in samples of environmental interest

Due to the different uses of radioactivity during the last decades, there has been an increase in the concentration of natural and artificial radionuclides in the environment. This, along with some accidents with a high affect public opinion (for example, Chernobyl and Fukushima), have led to the growth and establishment of environmental radioactivity monitoring programs. Currently, trends in legislation and research are focused on the development of accurate, precise, reliable and fast analytical methods with low limits of detection (LOD) for radionuclides determination, such as strontium and yttrium, in environmental samples. In this paper, two comprehensive reviews and four automated analytical systems for total and isotopic determination of yttrium and strontium are presented. The developed methods have been applied in the analysis of environmental samples with low concentrations of these analytes. These methodologies have been automated by exploiting flow analysis techniques, such as multi-syringe flow injection analysis (MSFIA), Sequential injection analysis (SIA) and laboratory-on-valve (LOV) systems, achieving a minimal handling and low consumption of samples and reagents, a significant reduction in waste generation and a high frequency of analysis. In the developed methodologies, some spectrometric methods such as ICP-OES and ICP-MS have been implemented as detection techniques instead of radiometric detectors obtaining a fully automated, low-cost and fast yttrium and strontium determinations.

Development of a numerical simulation method for modelling column breakthrough from extraction chromatography resins

A numerical simulation method has been developed to describe the transfer of analytes between solid and aqueous phases and assessed for a commercially available extraction chromatography resin (UTEVA resin). The method employs an ordinary differential equation solver within the LabVIEW visual programming language. The method was initially developed to describe a closed batch system. The differential equations and kinetic rate constants determined under these conditions were then applied to the flow-through column geometry. This was achieved by modelling the resin bed as a series of discrete vertically stacked sections, thereby generating an array of solid and aqueous concentration values. Axial flow was simulated by the advancement of the aqueous phase values by one array position with the value advancing from the final array position representing the column output concentration. An investigation into the observed difference in breakthrough profiles obtained under repeated conditions revealed the relative tolerance of the numerical simulation method to errors in each input parameter. Additional physical processes such as backpressure and leaching of the extractant were considered as an explanation for observed inconsistencies between experimental and simulated datasets. An elution sequence featuring multiple eluents was also simulated, demonstrating that the prediction of analyte separation sequences is possible. The potential to develop the LabVIEW coding into user friendly software with an extendable kinetic database is also discussed. This software will be a useful tool to radiochemists particularly in the development of new analytical methods using automated separation systems.

Dynamic Flow Approaches for Automated Radiochemical Analysis in Environmental, Nuclear and Medical Applications

Automated sample processing techniques are desirable in radiochemical analysis for environmental radioactivity monitoring, nuclear emergency preparedness, nuclear waste characterization and management during operation and decommissioning of nuclear facilities, as well as medical isotope production, to achieve fast and cost-effective analysis. Dynamic flow based approaches including flow injection (FI), sequential injection (SI), multi-commuted flow injection (MCFI), multi-syringe flow injection (MSFI), multi-pumping flow system (MPFS), lab-on-valve (LOV) and lab-in-syringe (LIS) techniques have been developed and applied to meet the analytical criteria under different situations. Herein an overall review and discussion on these techniques and methodologies developed for radiochemical separation and measurement of various radionuclides is presented. Different designs of flow systems with combinations of radiochemical separation techniques, such as liquid-liquid extraction (LLE), liquid-liquid microextraction (LLME), solid phase extraction chromatography (SPEC), ion exchange chromatography (IEC), electrochemically modulated separations (EMS), capillary electrophoresis (CE), molecularly imprinted polymer (MIP) separation and online sensing and detection systems, are summarized and reviewed systematically.

Method for (236)U Determination in Seawater Using Flow Injection Extraction Chromatography and Accelerator Mass Spectrometry

An automated analytical method implemented in a flow injection (FI) system was developed for rapid determination of (236)U in 10 L seawater samples. (238)U was used as a chemical yield tracer for the whole procedure, in which extraction chromatography (UTEVA) was exploited to purify uranium, after an effective iron hydroxide coprecipitation. Accelerator mass spectrometry (AMS) was applied for quantifying the (236)U/(238)U ratio, and inductively coupled plasma mass spectrometry (ICPMS) was used to determine the absolute concentration of (238)U; thus, the concentration of (236)U can be calculated. The key experimental parameters affecting the analytical effectiveness were investigated and optimized in order to achieve high chemical yields and simple and rapid analysis as well as low procedure background. Besides, the operational conditions for the target preparation prior to the AMS measurement were optimized, on the basis of studying the coprecipitation behavior of uranium with iron hydroxide. The analytical results indicate that the developed method is simple and robust, providing satisfactory chemical yields (80-100%) and high analysis speed (4 h/sample), which could be an appealing alternative to conventional manual methods for (236)U determination in its tracer application.

Multisyringe Flow Injection Analysis: State-of-the-Art and Perspectives

In the present paper, the characteristics (apparatus, manifold design, and operation mode) of multi-syringe flow injection analysis systems are discussed and critically compared to those of flow injection analysis and sequential injection systems. Furthermore, a survey of applications proposed until the present moment is presented, with special emphasis on implementation of in-line sample treatment.