Peptides analysis in blood plasma using on-line system of supported liquid membrane and high-performance liquid chromatography

CE with multi-walled carbon nanotubes (MWCNTs). Part II. SDS coated functionalized MWCNTs as pseudo-stationary phases in nanoparticle EKC - Retention behaviors of small and large solutes

In this study, functionalized multi-walled carbon nanotubes (MWCNTs), namely hydroxylated MWCNTs (MWCNT-OH), carboxylated MWCNTs (MWCNT-COOH) and sulfonated MWCNTs (MWCNT-SO₃H) coated with sodium dodecyl sulfate (SDS) were demonstrated as effective pseudo-stationary phases (PSPs) in the separation of various species by the nanoparticle capillary electrokinetic chromatography (NPEKC) mode of capillary electrophoresis (CE). Due to the significant increase in their surface charge density in the presence of SDS, the three SDS coated MWCNTs yielded high performance separation for herbicides, barbiturates, dansyl-DL-amino acids (Dns-AAs), dipeptides and proteins by NPEKC. In addition, high resolution tryptic peptide maps of three standard proteins including myoglobin, cytochrome C and lysozyme were readily obtained. The three PSPs systems yielded high plate numbers that spanned a wide range of values depending on the type of species. The values of the observed selectivity factors (i.e., α values) were significantly different among the three PSPs for solutes that underwent strong interactions with the SDS coated functionalized MWCNTs while for negatively charged solutes (e.g., Dns-AAs) of the same charge sign as the PSPs the α values were about the same on the three different PSPs indicating weak association with the PSPs and signaling separation based chiefly on the differences in electro-migration arising from differences in charge-to-mass ratios.

Is isolation of comprehensive human plasma peptidomes an achievable quest?

The low molecular weight (LMW; <10kDa)* plasma peptidome has been considered a source of useful diagnostic biomarkers and potentially therapeutic molecules, as it contains many cytokines, peptide hormones, endogenous peptide products and potentially bioactive fragments derived from the parent proteome. The small size of the peptides allows them almost unrestricted vascular and interstitial access, and hence distribution across blood-brain barriers, tumour and other vascular permeability barriers. Therefore, the peptidome may carry specific signatures or fingerprints of an individual's health, wellbeing or disease status. This occurs primarily because of the advantage the peptidome has in being readily accessible in human blood and/or other biofluids. However, the co-expression of highly abundant proteins (>10kDa) and other factors present inherently in human plasma make direct analysis of the blood peptidome one of the most challenging tasks faced in contemporary analytical biochemistry. A comprehensive compendium of extraction and fractionation tools has been collected concerning the isolation and micromanipulation of peptides. However, the search for a reliable, accurate and reproducible single or combinatorial separation process for capturing and analysing the plasma peptidome remains a challenge. This review outlines current techniques used for the separation and detection of plasma peptides and suggests potential avenues for future investigation. This article is part of a Special Issue entitled: HUPO 2014.

Improvement of the adsorption of quaternary ammonium on polypropylene affinity membrane through the control of its surface properties

Polypropylene fiber meshes were plasma-treated in order to attach new chemical functions corresponding to acidic or basic groups without altering the roughness of such thin material. An almost complete wettability of these plasma-treated materials is obtained. Because of the plasma-grafting of acid or amino moieties, such surface treatment allows increasing the adsorption rate of quaternary ammonium molecule like Aliquat 336. This increase was explained by specific interactions of ammonium head of the Aliquat 336 and hydrophilic group of plasma-treated PP, followed by the adsorption of a further layer of Aliquat 336 through hydrophobic interactions of its hydrocarbon chain. These interactions between the carrier and the polymeric surface were characterized leading to physisorption mechanism. Such new material could be applied to the extraction process since no evidence of aging was given.

Prediction of extraction efficiency in supported liquid membrane with a stagnant acceptor phase by means of artificial neural network

An artificial neural network model of supported liquid membrane extraction process with a stagnant acceptor phase is proposed. Triazine herbicides and phenolic compounds were used as model compounds. The model is able to predict the compound extraction efficiency within the same family based on the octanol-water partition coefficient, water solubility, molecular mass and ionisation constant of the compound. The network uses the back-propagation algorithm for evaluating the connection strengths representing the correlations between inputs (octanol-water partition coefficients logP, acid dissociation constant pK(a), water solubility and molecular weight) and outputs (extraction efficiency in dihexyl ether and undecane as organic solvents). The model predicted results in good agreement with the experimental data and the average deviations for all the cases are found to be smaller than ±3%. Moreover, standard statistical methods were applied for exploration of relationships between studied parameters.

Dynamic supported liquid membrane tip extraction of glyphosate and aminomethylphosphonic acid followed by capillary electrophoresis with contactless conductivity detection

A dynamic supported liquid membrane tip extraction (SLMTE) procedure for the effective extraction and preconcentration of glyphosate (GLYP) and its metabolite aminomethylphosphonic acid (AMPA) in water has been investigated. The SLMTE procedure was performed in a semi-automated dynamic mode and demonstrated a greater performance against a static extraction. Several important extraction parameters such as donor phase pH, cationic carrier concentration, type of membrane solvent, type of acceptor stripping phase, agitation and extraction time were comprehensively optimized. A solution of Aliquat-336, a cationic carrier, in dihexyl ether was selected as the supported liquid incorporated into the membrane phase. Quantification of GLYP and AMPA was carried out using capillary electrophoresis with contactless conductivity detection. An electrolyte solution consisting of 12 mM histidine (His), 8 mM 2-(N-morpholino)ethanesulfonic acid (MES), 75 microM cetyltrimethylammonium bromide (CTAB), 3% methanol, pH 6.3, was used as running buffer. Under the optimum extraction conditions, the method showed good linearity in the range of 0.01-200 microg/L (GLYP) and 0.1-400 microg/L (AMPA), acceptable reproducibility (RSD 5-7%, n=5), low limits of detection of 0.005 microg/L for GLYP and 0.06 microg/L for AMPA, and satisfactory relative recoveries (90-94%). Due to the low cost, the SLMTE device was disposed after each run which additionally eliminated the possibility of carry-over between runs. The validated method was tested for the analysis of both analytes in spiked tap water and river water with good success.

Sample preparation

A panorama of sample preparation methods has been composed from 481 references, with a highlight of some promising methods fast developed during recent years and a somewhat brief introduction on most of the well-developed methods. All the samples were commonly referred to molecular composition, being extendable to particles including cells but not to organs, tissues and larger bodies. Some criteria to evaluate or validate a sample preparation method were proposed for reference. Strategy for integration of several methods to prepare complicated protein samples for proteomic studies was illustrated and discussed.

Principles, developments and applications of on-line coupling of extraction with chromatography

On-line coupling of extraction and chromatographic separation allows the whole analysis to be performed in a closed system. On-line systems are particularly useful when the analytes are labile, the amount of sample is limited, or very high sensitivity is required. Many on-line systems have been developed both for liquid and for solid samples. This review discusses the different instruments that have been constructed and the factors that need to be considered in the coupling. Selected illustrative applications are described to illustrate the potential of the on-line systems.

Extraction and preconcentration of salbutamol and terbutaline from aqueous samples using hollow fiber supported liquid membrane containing anionic carrier

This paper presents a new three-phase liquid-phase microextraction (LPME) strategy for extraction and preconcentration of salbutamol (SB) and terbutaline (TB) from aqueous samples, including urine. The drugs were extracted from 11 ml of aqueous sample (source phase; SP) into an organic phase with microliter volume located inside the pores of a polypropylene hollow fiber, and then back-extracted into 24 microl of a second aqueous solution as the receiving phase (RP), located in the lumen of the hollow fiber. In preliminary experiments, we tried to transport the drugs using a pH gradient between the two sides of the hollow fiber. Due to the existence of both amine and phenolic groups on the drugs, very little transport occurred and enrichment factors (EF) less than one were obtained. Further experiments were done in the presence of bis(2-ethylhexyl) monohydrogenphosphoric acid (D2EHPA) or methyltrioctylammonium chloride (Aliquat 336) in the organic phase, to extract drugs from acidic and basic matrices, respectively. Results showed that transport of drugs from alkaline solution into 1M of sodium bromide occurred when the membrane was impregnated with dihexyl ether containing 20% Aliquat 336. To optimize the EF, the effects of different parameters such as the nature of organic solvent used to impregnate the membrane, compositions and volumes of SP and RP, type and concentration of carrier, extraction time and stirring rate were investigated. Optimal results were obtained in the presence of 0.005 M of NaOH (pH 11.70) in the SP, 1M of NaBr in the RP, 20% of Aliquat 336 in dihexyl ether as membrane impregnation solvent, stirring rate of 500 rpm and extraction time of 60 min. Under these conditions, enrichment factors of 52.9 and 213.1, dynamic linear ranges of 20-5000 and 10-5000, and limits of detection of 2.5 and 0.5 ng/ml were obtained for salbutamol and terbutaline, respectively. Also determination of drugs in environmental water and urine samples in the range of nanograms per millilitre with RSDs<10% was possible using HPLC-photodiode array detection or HPLC-MS.