A high performance glucose biosensor enhanced via nanosized SiO2

Nanosized Particles of Silica and Its Derivatives for Applications in Various Branches of Food and Nutrition Sectors

Nanosized particles of silica and its derivatives have been identified as versatile for a broad range of science, technology, and engineering applications. In this paper, an effort has been made to provide a short review from the available literature information on their applications in various branches of food and nutrition sectors. The information provided in this paper describes various parameters affecting their performances and efficiencies. The properties and applications of nanosilica and its derivatives have been compared with microsilica and bulk-silica for their performances. The use of nanosized particles of silica and its derivatives provides a number of advantages. Their efficiencies and performances are significantly higher than those of the traditional ones.

Label-free carbon quantum dots as photoluminescence probes for ultrasensitive detection of glucose

Carbon quantum dots were demonstrated to be easy-to-use photoluminescence probes for the detection of glucose with fluorescence enhancement.

Laccase biosensor based on phytic acid modification of nanostructured SiO₂ surface for sensitive detection of dopamine

In this work, three kinds of nanostructured silica-phytic acid (SiO2-PA) materials with diverse morphologies including spherical SiO2-PA (s-SiO2-PA), rod-like (r-SiO2-PA), and helical SiO2-PA (h-SiO2-PA) were prepared with the help of electrostatic interaction. The SiO2-PA nanomaterials with different morphologies were characterized by using transmission electron microscopy (TEM), Fourier transform infrared (FTIR), electrochemical impedance spectroscopy (EIS), and circular dichroism spectrum (CD). Diverse morphologies of SiO2-PA were used as electrode decorated materials to achieve a high efficiency for electrochemical dopamine (DA) detection. The laccase biosensors were fabricated by immobilizing different morphologies of SiO2-PA nanomaterials and laccase onto the glassy carbon electrode (GCE) surface, successively. Then the electrochemical responses of the different morphologies of nanostructured SiO2-PA nanomaterials to laccase were discussed. Results indicated that compared to laccase/s-SiO2-PA and laccase/r-SiO2-PA, the laccase/h-SiO2-PA-modified electrode showed the best electrochemical performances.

Polysilicon wire glucose sensor highly immune to interference

This study investigated the interference elimination ability of a glucose sensor made of polysilicon wire (PSW) with a surface modified by 3-aminopropyltriethoxysilane mixed with polydimethylsiloxane-treated hydrophobic fumed silica nanoparticles plus ultra-violet illumination (γ-APTES+NPs+UV). Glucose sensing of the PSW sensor in the presence of five common interferences such as ascorbic acid (AA), uric acid (UA), acetaminophen (AP), L-cysteine (Lys), and citric acid (CA) was performed. We found that the disturbance caused by the interferences was low for interference-to-glucose concentration ratios up to 600:1 if the PSW surface is modified with γ-APTES+NPs+UV. The outstanding interference immunity of this PSW glucose sensor is believed to be mainly due to the fact that it is a dry-type sensor and the extremely low leakage of the γ-APTES+NPs membrane which allows the PSW to show three orders of magnitude lower leakage current than with the γ-APTES membrane only. In addition to its excellent interference immunity, the PSW glucose sensor with a line width of 100 nm also exhibits a wide linear detection range, an ultra-high sensitivity, an ultra low detection limit, and it can be reused more than a thousand times without much sensitivity degradation.

Controlled assembly for well-defined 3D bioarchitecture using two active enzymes

This paper reports that a bioarchitecture with two different active enzymes can be fabricated conveniently on a prepatterned surface by highly selective surface-templated layer-by-layer (LBL) assembly by coupling a bilayer of avidin/biotin-lactate oxidase (biotin-LOD) with a bilayer of avidin/biotin-horseradish peroxidase (biotin-HRP). The two different active enzymes can be utilized as excellent building blocks for the fabrication of well-defined 3D nanostructures with precise control of the position and height on the surface. In addition, the LBL assembled bienzyme structures are highly functional, and bioarchitectures based on LOD and HRP-mediated coupling reaction can be employed in a number of viable biosensing applications.

Molecular Recognition and Specific Interactions for Biosensing Applications

Molecular recognition and specific interactions are reliable and versatile routes for site-specific and well-oriented immobilization of functional biomolecules on surfaces. The control of surface properties via the molecular recognition and specific interactions at the nanoscale is a key element for the nanofabrication of biosensors with high sensitivity and specificity. This review intends to provide a comprehensive understanding of the molecular recognition- and specific interaction-mediated biosensor fabrication routes that leads to biosensors with well-ordered and controlled structures on both nanopatterned surfaces and nanomaterials. Herein self-assembly of the biomolecules via the molecular recognition and specific interactions on nanoscaled surfaces as well as nanofabrication techniques of the biomolecules for biosensor architecture are discussed. We also describe the detection of molecular recognition- and specific interaction-mediated molecular binding as well as advantages of nanoscale detection.

Electrochemical Sensors for Clinic Analysis

Demanded by modern medical diagnosis, advances in microfabrication technology have led to the development of fast, sensitive and selective electrochemical sensors for clinic analysis. This review addresses the principles behind electrochemical sensor design and fabrication, and introduces recent progress in the application of electrochemical sensors to analysis of clinical chemicals such as blood gases, electrolytes, metabolites, DNA and antibodies, including basic and applied research. Miniaturized commercial electrochemical biosensors will form the basis of inexpensive and easy to use devices for acquiring chemical information to bring sophisticated analytical capabilities to the non-specialist and general public alike in the future.

Enzyme-functionalized gold nanowires for the fabrication of biosensors

Gold nanowires were prepared by an electrodeposition strategy using nanopore polycarbonate (PC) membrane, with the average diameter of the nanowires about 250 nm and length about 10 microm. The nanowires prepared were dispersed into chitosan (CHIT) solution and stably immobilized onto glassy carbon electrode (GCE) surface. The electrochemical behavior of gold nanowire modified electrode and its application to the electrocatalytic reduction of hydrogen peroxide (H(2)O(2)) were investigated. The modified electrode allows low potential detection of hydrogen peroxide with high sensitivity and fast response time. Moreover, the good biocompatibility of nanometer-sized gold, the vast surface area of the nanowire-structure make it ideal for adsorption of enzymes for the fabrication of biosensors. Glucose oxidase was adsorbed onto the nanowire surface to fabricate glucose biosensor as an application example. The detection of glucose was performed in phosphate buffer (pH 6.98) at -0.2 V. The resulting glucose biosensor exhibited sensitive response, with a short response time (<8 s), a linear range of 10(-5)-2 x 10(-2) M and detection limit of 5 x 10(-6) M.

Amperometric glucose biosensor based on self-assembly hydrophobin with high efficiency of enzyme utilization

Hydrophobins are a family of natural self-assembling proteins with high biocompability, which are apt to form strong and ordered assembly onto many kinds of surfaces. These physical-chemical and biological properties make hydrophobins suitable for surface modification and biomolecule immobilization purposes. A class II hydrophobin HFBI was used as enzyme immobilization matrix on platinum electrode to construct amperometric glucose biosensor. Permeability of HFBI self-assembling film was optimized by selecting the proper HFBI concentration for electrode modification, in order to allow H(2)O(2) permeating while prevent interfering compounds accessing. HFBI self-assembly and glucose oxidase (GOx) immobilization was monitored by quartz crystal microbalance (QCM), and characterization of the modified electrode surface was obtained by scanning electron microscope (SEM). The resulting glucose biosensors showed rapid response time within 6s, limits of detection of 0.09 mM glucose (signal-to-noise ratio=3), wide linear range from 0.5 to 20mM, high sensitivity of 4.214 x 10(-3)AM(-1)cm(-2), also well selectivity, reproducibility and lifetime. The all-protein modified biosensor exhibited especially high efficiency of enzyme utilization, producing at most 712 microA responsive current for per unit activity of GOx. This work provided a promising new immobilization matrix with high biocompatibility and adequate electroactivity for further research in biosensing and other surface functionalizing.

Glucose biosensor based on nano-SiO2 and "unprotected" Pt nanoclusters

The "unprotected" Pt nanoclusters (average size 2 nm) mixed with the nanoscale SiO(2) particles (average size 13 nm) were used as a glucose oxidase immobilization carrier to fabricate the amperometric glucose biosensor. The bioactivity of glucose oxidase (GOx) immobilized on the composite was maintained and the as-prepared biosensor demonstrated high sensitivity (3.85 microA mM(-1)) and good stability in glucose solution. The Pt-SiO(2) biosensor showed a detection limit of 1.5 microM with a linear range from 0.27 to 4.08 mM. In addition, the biosensor can be operated under wide pH range (pH 4.9-7.5) without great changes in its sensitivity. Cyclic voltammetry measurements showed a mixed controlled electrode reaction.