Determination of trace elements in serum by dynamic reaction cell inductively coupled plasma mass spectrometry

Ozone reaction induced multiple ionic species for internal-cross-checkable determination of aluminium by tandem quadrupole inductively coupled plasma mass spectrometry

BACKGROUND

Aluminium is a mono-isotope element and can be determined by inductively coupled plasma mass spectrometry (ICP-MS). The measurement of aluminium by ICP-MS suffers potential spectral interferences from multiple elements, which make it challenging to ensure the reliability of the results. Fortunately, the availability of tandem quadrupole ICP-MS (i.e. ICP-QMS/QMS) made it possible to measure multiple aluminium related ionic species for analysis. In the present work, on-line generated ozone was introduced as the reaction gas to the ICP-QMS/QMS for the analysis of aluminium.

RESULTS

Multiple ionic species were obtained by using ozone as the cell gas for determination of aluminium by ICP-QMS/QMS. In comparison to oxygen, ozone apparently improved the yield of AlO+, AlO2+, and AlO3+ from the reaction with Al+, attributable to the exothermic reactions when ozone was used. Determination of aluminium with these product ions was investigated at multiple radio frequency (RF) power conditions (800 W-1600 W, step 200 W) for the plasma. At low power conditions (800 W and 1000 W), the measurement of each ion suffered notable non-spectral interferences and caused difference in sensitivities by around 20 % between a digested sample of tea leaf powder and a simple aluminium standard solution. Based on a standard addition method, the result of aluminium in a tea leaf powder certified reference material obtained with each product ion (AlOn+, n = 0 to 3) agreed with the certified value, and independent to the RF power of the plasma.

SIGNIFICANCE

Due to the endothermic reactions of aluminium ion with ozone, the yields of AlOn+ (n = 1 to 3) were greatly improved. As a results, the use of ozone as a reaction gas for ICP-QMS/QMS permitted the measurement of aluminium by multiple ionic species, AlOn+ (n = 0 to 3), which provide internal-cross-checkable quantitative results for this mono-isotopic element.

Enhancing Endothelial Function with Nutrient-Enriched Table Hen Eggs: A Randomized Study in Patients Recovering from Acute Coronary Syndrome

Purpose

This study investigated the effect of consumption of table eggs enriched with n-3 polyunsaturated fatty acids (n-3 PUFA), lutein, vitamin E and selenium on microvascular function, oxidative stress and inflammatory mediators in patients after acute coronary syndrome (ACS).

Patients and Methods

In a prospective, randomized, interventional, double-blind clinical trial, ACS patients were assigned to either the Nutri4 (N=15, mean age: 57.2 ± 9.2 years), or the Control group (N=13; mean age 56.8 ± 9.6 years). The Nutri4 group consumed three enriched hen eggs daily for three weeks, providing approximately 1.785 mg of vitamin E, 0.330 mg of lutein, 0.054 mg of selenium and 438 mg of n-3 PUFAs. Biochemical parameters, including serum lipids, liver enzymes, nutrient concentrations, serum antioxidant enzyme activity (catalase (CAT), glutathione peroxidase (GPx), superoxide dismutase (SOD)), and markers of oxidative stress (thiobarbituric acid reactive substances (TBARS) and ferric reducing ability (FRAP)), were assessed before and after the dietary interventions. Additionally, arterial blood pressure, heart rate, body composition, fluid status, anthropometric measurements, and skin microvascular blood flow responses to various stimuli (postocclusive reactive hyperemia (PORH), acetylcholine- (Ach ID), and sodium nitroprusside- (SNP ID)) were measured using laser Doppler flowmetry (LDF) throughout the study.

Results

The intake of Nutri4 eggs led to a significant reduction in LDL cholesterol levels, while the levels of total cholesterol remained within the established reference values. Consuming Nutri4 eggs resulted in a 12.7% increase in serum vitamin E levels, an 8.6% increase in selenium levels, and demonstrated a favorable impact on microvascular reactivity, as evidenced by markedly improved PORH and ACh ID. Nutri4 eggs exerted a significant influence on the activity of GPx and SOD, with no observed changes in TBARS or FRAP values.

Conclusion

The consumption of Nutri4 eggs positively influenced microvascular function in individuals with ACS, without eliciting adverse effects on oxidative stress.

Determination of Manganese in Serum Using GFAAS: Serum Reference Values for Manganese in the Adolescent Girls of the DERVAN Cohort

Current proposed method allows for the determination of manganese in serum sample using aqueous standard calibration technique on Graphite Furnace atomic absorption spectrophotometer (GFAAS) using deuterium background correction. This method involves determination of manganese from digested serum samples without the use of matrix modifier. Pyrolysis and atomization temperatures are 1200 °C and 2200 °C respectively. The limit of detection (LoD) and limit of quantitation (LoQ) of the method are 0.0097 ng/ml (0.18 nmol/l) and 0.032 ng/ml (0.58 nmol/l) respectively. Validation of the method was carried out using seronorm trace element level-1 serum standard with excellent agreement between measured value and certified value. Accuracy was demonstrated by the spike and recovery study with analytical recovery between 98.8 and 100.6% in serum. The serum reference value for manganese in adolescent girls of rural Konkan region of India range from 4.7 to 215 nmol/l.

Determination of trace elements in high-purity quartz samples by ICP-OES and ICP-MS: A normal-pressure digestion pretreatment method for eliminating unfavorable substrate Si

The analysis of siliceous matrix samples may adopt a two-step pretreatment, which includes melting with ammonium hydrogen fluoride and redissolving with nitric acid. However, the residual of substrate silicon unfavorable to the determination of trace elements in the samples due to serious matrix effects. Here, a new digestion method using simultaneously both ammonium bifluoride and nitric acid under normal pressure was developed for high-purity quartz sand sample. The digestion pretreatment is a two step process: melting/dissolving with both ammonium bifluoride and nitric acid at 200 °C for 2 h, and evaporating the solution at 250 °C to dryness. As confirmed by XRD analysis, silicates in the sample were converted to (NH₄)₃SiF₆NO₃ in the melting/dissolving step. TGA analysis shows that the generated (NH₄)₃SiF₆NO₃ could be decomposed and evaporated completely at 250 °C, which ensured a complete removal of silicon by the followed evaporation of the solution at 250 °C. As a result, the followed ICP-OES and ICP-MS analysis needed a solution dilution of only 100 times for the determination of Ca, Mg, Al, Rb, Ba, REE and other trace elements. The new method was applied to the analysis of three certified reference materials, and the results were well consistent with the standard value with RSD% values between 0.62% and 9.73%. Therefore, this method can be applied to the analysis of trace elements in high purity silica-based samples, with the advantages of time-saving, small dilution factor (only 100 times) and low detection limit.

Trace metal determination as it relates to metallosis of orthopaedic implants: Evolution and current status

In utilising metal surfaces that are in constant contact with each other, metal-on-metal (MoM) surgical implants present a unique challenge, in the sense that their necessity is accompanied by the potential risk of wear particle generation, metal ion release and subsequent patient toxicity. This is especially true of orthopaedic devices that are faulty and subject to failure, where the metal surfaces undergo atypical degradation and release even more unwanted byproducts, as was highlighted by the recent recall of orthopaedic surgical implants. The aim of this review is to examine the area of metallosis arising from the wear of MoM articulations in orthopaedic devices, including how the surgical procedures and detection methods have advanced to meet growing performance and analytical needs, respectively.

Seasonal variation in the input of atmospheric selenium to northwestern Greenland snow

Oxygen isotope ratio (δ(18)O) and concentrations of Al, Na(+), methanesulfonic acid (MSA), SO4(2-), and selenium (Se) in a continuous series of 70 snow samples from a 3.2-m snow pit at a site in northwestern Greenland were determined using ultraclean procedures. Well-defined depth profiles of δ(18)O, Al, and sea-salt-Na(+) allowed the determination of chronology of the snow pit that spanned approximately 6 years from spring 2003 to summer 2009. Se concentrations were at a low pg/g level, ranging from 7.2 to 45 pg/g, and exhibited high variability with generally higher values during winter and spring and lower values during summer and fall. Very high crustal enrichment factors (EFc) of Se averaging approximately 26,600 for the entire time period indicate a small contribution from crust dust. High Se/MSA ratios are generally observed in the winter and spring snow layers, in which the Se concentrations were relatively high (>20 pg/g). This suggests that a significant component of the Se present in the snow layers is of anthropogenic origin. During the summer season, however, high EFc values are accompanied with low Se/MSA, indicating an increased contribution of marine biogenic sources. Significant correlations between Se, Al, and non-sea-salt SO4(2-) highlight that significant inputs of Se to the snow are likely controlled by the seasonality in the transport efficiency of anthropogenic Se from the source regions to the site. Based on the seasonal changes in Se concentrations, Se/MSA, and Se/S ratios observed in the samples, the input of anthropogenic Se to the site appears to be governed by the long-range transportation of Se emitted from coal combustion in East Asian countries, especially in China.

Fractionation analysis of manganese in Turkish hazelnuts (Corylus avellana L.) by inductively coupled plasma-mass spectrometry

In this study, an analytical fractionation scheme based on water, diethyl ether, n-hexane, and methanol extractions has been developed to identify manganese-bound fractions. Additionally, in vitro simulated gastric and intestinal digestion, n-octanol extraction, and activated carbon adsorption were used to interpret the manganese-bound structures in hazelnuts in terms of bioaccessibility. The total content of manganese in the samples was determined by inductively coupled plasma-mass spectrometry after microwave-assisted digestion, and additional validation was performed using atomic absorption spectroscopy. Water fractions were further evaluated by high-performance liquid chromatography hyphenated to inductively coupled plasma-mass spectrometry for the identification of water-soluble manganese fractions in hazelnut samples. The limits of detection and quantification were 3.6 and 12.0 μg L(-1), respectively, based on peak height.

Optimisation of whole blood and plasma manganese assay by ICP-MS without use of a collision cell

BACKGROUND

Manganese (Mn) toxicity has been reported in patients receiving total parenteral nutrition. To avoid unnecessary exposure it is recommended by NICE (National Institute for Clinical Excellence) that blood Mn concentrations are monitored. The aim of the study was to develop a method using inductively coupled plasma mass spectrometry (ICP-MS) for the reliable determination of Mn in plasma and whole blood, as indices of acute and chronic exposure.

METHODS

Whole blood and plasma samples were prepared by appropriate dilution (diluent containing 0.005% Triton X-100, 0.2% propan-2-ol, 0.2% butan-1-ol and 1% nitric acid) addition of an internal standard gallium, followed by centrifugation to remove cell debris. Thermo Fisher Scientific ExCell and X Series ICP-MS instruments were used to define and correct for polyatomic interference on Mn assay.

RESULTS

Mn was quantified at mass 55 using aqueous calibration and the polyatomic interference from FeH was successfully eliminated by modified (Xt) skimmer cones but not with the collision cell (collision gas 7% H2 in He, flow rate 4-7 mL/min). The assay was validated showing good precision, limit of detection and percentage recovery. Good agreement was observed with the All Laboratory Trimmed Mean of External Quality Assurance samples y (in house)=1.1 (ALTM)-45.0 between values of 250 and 750 nmol/L.

CONCLUSIONS

A method has been developed using ICP-MS for the analysis of whole blood and plasma Mn incorporating a novel method of eliminating interference by utilizing the different geometries of the Xt interface cones. The procedure is simple and robust with good precision and recovery over a wide dynamic range.

Using dried-droplet laser ablation inductively coupled plasma mass spectrometry to quantify multiple elements in whole blood

This paper describes a simple procedure for the direct analysis and determination of multiple elements in dried blood samples on a filter membrane using laser ablation coupled with inductively coupled plasma mass spectrometry (LA-ICP-MS). With this technique, we simultaneously quantified 13 elements in whole blood: Be, Mn, Co, Ni, Tl, Bi, Sb, Pb, Cu, Zn, Ba, Mg, and Cd. The measured accuracies was in agreement with the Seronorm CRM certified values, except for Mn, Zn, Ba and Cd, which presented absolute differences higher than the expanded uncertainty for these elements. The within-run precision was less than 5.7% (relative standard deviation, RSD), except for the analyses of Be, and Mn (8.6% and 11.1%, respectively). The reproducibility (between-run precision) was calculated in terms of the RSD obtained for 12 analyses (i.e., four replicates of each sample in three analytical runs). Apart from Be, Mn, and Zn, the reproducibilities of all the elements listed above ranged between 4.0% and 8.5%. In contrast, for Cd, the concentration obtained was significantly different from the certified value; analyses of this element exhibited low reproducibility. Applying the matrix-matched calibration method, the accuracy for Cd measured was in agreement with both SRM966 and BCR 635; thus, matrix-matched calibration is a practical means of overcoming matrix-enhancement effects for the quantification of Cd. Sample throughput (ca. 5 min per sample) made it possible to rapidly screen a larger number of samples relative to other techniques that require time-consuming sample preparation steps (e.g., removal of a portion of the solid sample or digestion).

Dynamic reaction cell ICP-MS for determination of total As, Cr, Se and V in complex matrices: still a challenge? A review

Mass interferences, caused by atomic or polyatomic species and having the same mass/charge ratio of the analyte, can be a severe limit for a reliable assay of trace and ultratrace elements by ICP-MS. The DRC™ technology uses a reaction gas to overcome these interferences. Reactions of charge exchange, atom transfer, adduct formation, condensation and analyte association/condensation are the main mechanisms. Interfering ions tend to react with the gas exothermally, while, the analyte reacts endothermally. Selecting the most appropriate reaction gas in DRC-ICP-MS is the very critical point for the determination of strongly interfered elements. A careful evaluation of the reaction mechanisms and the chemistry involved are required. The DRC allows the use of different gases, among them, ammonia (NH(3)), methane (CH(4)), hydrogen (H(2)) and oxygen (O(2)) are the most known, but there are other potentially useful gases like nitrous oxide (N(2)O), nitrogen oxide (NO), carbon dioxide (CO(2)), fluoromethane (CH(3)F), sulphur hexafluoride (SF(6)) and carbon disulfide (CS(2)). This paper provides a review on the analytical challenges for a reliable assay of As, Cr, Se and V by DRC-ICP-MS and illustrates different approaches and mechanisms involved in the analysis of polymers, biological fluids (serum, urine and whole blood), rock, soil and particulate matter.

Uncertainty evaluation in the analysis of biological samples by sector field inductively coupled plasma mass spectrometry. Part A: Measurements of Be, Cd, Hg, Ir, Pb, Pd, Pt, Rh, Sb, U, Tl and W in human serum

A protocol that utilises data (trueness/recovery, precision and robustness) from validation tests to calculate measurement uncertainty was described and applied to a sector field inductively coupled plasma mass spectrometry (SF-ICP-MS)-based method for the determination of Be, Cd, Hg, Ir, Pb, Pd, Pt, Rh, Sb, U, Tl and W in human serum. The method was validated according to criteria issued by international bodies such as AOAC, Eurachem and ISO and the uncertainty in the analytical measurements was estimated following the Eurachem/Citac guide. The methodology was based on dilution of human serum with water and analysis by serum-matched standard calibration. The method quantification limits ranged 0.02 microg/L (Tl, Ir) to 0.26 microg/L (Hg). The coefficients of regression were greater than 0.9991 over a range of two orders of magnitude of concentration. The mean trueness was 101% and the mean recovery on three levels of fortification (1-, 1.5-, and 2-times the baseline serum level) ranged between 93.3% and 106%. The maximum relative standard deviation values for repeatability and within-laboratory reproducibility were 12.8% and 13.5%. The method was robust to slight variations of some critical factors relevant to the sample preparation and SF-ICP-MS instrumentation. The relative expanded uncertainty over three levels of concentration ranged from 11.6% (Hg) to 27.6% (Pt), and the uncertainty on the within-laboratory reproducibility, which included factors such as time, analyst and calibration, represented the main contribution to the overall uncertainty.

Method validation for determination of arsenic, cadmium, chromium and lead in milk by means of dynamic reaction cell inductively coupled plasma mass spectrometry

With Regulation No. 1881/2006 the European Union fixed a maximum level for lead in milk. Consequently, there is the need to determine very low concentration of elements that may be present in milk in trace and ultratrace levels. Quadrupole inductively coupled plasma mass spectrometry (Q-ICP-MS) combined with dynamic reaction cell (DRC) has been widely employed in order to reach very low concentration, requested for this product. Furthermore, the DRC technology can help in removing polyatomic and argon-based interferences. In the present study, a method for the determination of arsenic, cadmium, chromium and lead in bovine milk was validated according to the EU common standards by means of DRC-ICP-MS. The main parameters evaluated in the validation were: recovery, repeatability and within-laboratory reproducibility, detection and quantification limits, linearity range and measurement uncertainty. Additionally, stability studies of the analyte in solution and ruggedness studies were carried out. The results obtained for limit of detection (LoD) and limit of quantification (LoQ) in microg kg(-1) were respectively: As, 3.1 and 9.5; Cd, 0.08 and 0.24; Cr, 0.229 and 0.693; Pb, 0.5 and 1.5. While for the recovery: As, 91%; Cd 96%; Cr 99%; Pb, 95%. As for the repeatability: As, 7%; Cd, 3%; Cr, 6%; Pb, 4%.

Determination of depleted uranium in fish

Depleted uranium (DU) is a by-product of the uranium enrichment process for nuclear fuel. According to the Commission Decision 2002/657/EC, a confirmatory method for the quantification of DU in freeze-dried fish was developed by isotope ratio dynamic reaction cell inductively coupled plasma-mass spectrometry (IR-DRC-ICP-MS). A preliminary study was performed to determine the following parameters: instrumental detection limit (IDL), isotopic ratio measurement limit (IRML), percentage of DU (P(DU)) in presence of natural uranium (NU) and limit of quantification (LoQ(DU)). The analyses were carried out by means of IR-DRC-ICP-MS. Ammonia was the reaction gas used for the dynamic reaction cell. In addition, a sector field inductively coupled plasma mass spectrometer (SF-ICP-MS) was employed to calculate the within-laboratory reproducibility. For the confirmatory method the following parameters were determined: (a) trueness; (b) precision; (c) critical concentrations alpha and beta (CC(alpha), CC(beta)); (d) specificity; (e) stability. Trueness was assessed by using the recovery tests. The recovery and within-laboratory reproducibility were determined by fortifying the blank digested solution of dogfish tissue: six aliquots were fortified at 1, 1.5 and 2 times the LOQ(DU) with 25.0, 37.5 and 50.0 ng L(-1) or 4.16, 6.24, 8.32 microg kg(-1) with a recovery of -8.2, +9.5 and +9.6%, respectively and a within-laboratory reproducibility (three analytical run) of 15.5, 8.0 and 11.0%, respectively. The results for the decision limit and the detection capability were: CC(alpha) = 11.69 ng L(-1) and CC(beta) = 19.8 ng L(-1). The digested solutions resulted to be stable during testing time (60 days) and the method can be considered highly specific as well.

ATP-binding cassette, subfamily G (ABCG family)

This review summarizes the characteristics of the ATP-binding cassette, subfamily G (ABCG family), which has five members: ABCG1, ABCG2, ABCG4, ABCG5, and ABCG8. The members consist of a single ABC cassette in the amino terminal followed by six putative transmembrane domains, and to become functionally active, they form homo- or obligate heterodimers. Except for ABCG2, the members of the ABCG family play an important role in efflux transport of cholesterol. Mutations causing a loss of function of ABCG5 or ABCG8 are associated with sitosterolemia characterized by accumulation of phyto- and shellfish sterols. Unlike other members, ABCG2 is not involved in cholesterol efflux, but it exhibits broad substrate specificity to xenobiotic compounds. ABCG2 confers cancer cells resistance to anticancer drugs and plays a critical role in the pharmacokinetics of drugs in the clearance organs and tissue barriers. ABCG2 is also associated with a subpopulation phenotype of stem cells. Genetic polymorphisms of ABCG2 have been suggested to account for the interindividual differences in the pharmacokinetics of drugs.