One-shot lactate chemiluminescent biosensor

Reduced graphene oxide-functionalized polymer microneedle for continuous and wide-range monitoring of lactate in interstitial fluid

Despite substantial developments in minimally invasive lactate monitoring microneedle electrodes, most such electrode developments have focused on either sensitivity or invasiveness while ignoring a wide range of detection, which is the most important factor in measuring the normal range of lactate in interstitial fluid (ISF). Herein, we present a polymer-based planar microneedle electrode fabrication using microelectromechanical and femtosecond laser technology for the continuous monitoring of lactate in ISF. The microneedle is functionalized with two-dimensional reduced graphene oxide (rGO) and electrochemically synthesized platinum nanoparticles (PtNPs). A particular quantity of Nafion (1.25 wt%) is applied on top of the lactate enzyme to create a diffusion-controlled membrane. Due to the combined effects of the planar structure of the microneedle, rGO, and membrane, the biosensor exhibited excellent linearity up to 10 mM lactate with a limit of detection of 2.04 μM, high sensitivity of 43.96 μA mM-1cm-2, a reaction time of 8 s and outstanding stability, selectivity, and repeatability. The feasibility of the microneedle is evaluated by using it to measure lactate concentrations in artificial ISF and human serum. The results demonstrate that the microneedle described here has great potential for use in real-time lactate monitoring for use in sports medicine and treatment.

A Novel Polyurethane-Based Polyion Complex Material with Tunable Selectivity against Interferents for Selective Dopamine Determination

Polyion complex (PIC) materials have been widely used in biosensors due to their molecular selectivity. However, achieving both widely controllable molecular selectivity and long-term solution stability with traditional PIC materials has been challenging due to the different molecular structures of polycations (poly-C) and polyanions (poly-A). To address this issue, we propose a novel polyurethane (PU)-based PIC material in which the main chains of both poly-A and poly-C are composed of PU structures. In this study, we electrochemically detect dopamine (DA) as the analyte and L-ascorbic acid (AA) and uric acid (UA) as the interferents to evaluate the selective property of our material. The results show that AA and UA are significantly eliminated, while DA can be detected with a high sensitivity and selectivity. Moreover, we successfully tune the sensitivity and selectivity by changing the poly-A and poly-C ratios and adding nonionic polyurethane. These excellent results were employed in the development of a highly selective DA biosensor with a detection range from 500 nM to 100 μM and a 3.4 μM detection limit. Overall, our novel PIC-modified electrode has the potential to advance biosensing technologies for molecular detection.

A novel immobilization fluorescence capillary analysis method and its applications

Fluorescence capillary analysis (FCA) realizes trace-level analysis of micro-volume samples; it is easy to operate, extremely low in analytical cost and can significantly lessen environmental pollution from analytical chemistry waste. FCA has the characteristics of green analytical chemistry and has been applied in clinical, biochemical, pharmaceutical, food safety and other fields. FCA basically involves a micro-volume glass capillary, a capillary holder and an ordinary fluorescence detector. The capillary is not only a container for chemical reaction and detection but also functions as a carrier to immobilize enzymes, gene probes or reagents; it can be used repeatedly or can be disposable. In analysis, the capillary which is modified with functional reagents sucks in a measured liquid for the reaction and is then inserted into the holder within the fluorescent detector for measurement. The immobilized FCA method has been successfully used in the determination of reduced coenzyme I, ethanol in liqueur, lactic acid in dairy products, pyruvic acid and glucose in serum, trace-level sulfated bile acid in urine, the ratio of pyruvic/lactic acid in serum, and pyruvic acid in cells as well as in DNA end-labeling and dyeing methods. Further, FCA can also be extended to capillary arrays to complete multipurpose simultaneous determinations and can be combined with mobile phones as fluorescence detectors for use in mobile health analytical technology. FCA will produce considerable social benefits in medicine, pharmacy, fermentation of food, environmental protection and other fields. Therefore, the relevant contents are presented in this tutorial review.

An electrochemiluminescence cloth-based biosensor with smartphone-based imaging for detection of lactate in saliva

An electrochemiluminescence cloth-based biosensor with smartphone-based imaging is firstly proposed, and is applied for facile detection of lactate in saliva.

Development of an enzymatic chromatography strip with nicotinamide adenine dinucleotide-tetrazolium coupling reactions for quantitative l-lactate analysis

In this study, a dry assay of l-lactate via the enzymatic chromatographic test (ECT) was developed. An l-lactate dehydrogenase plus a nicotinamide adenine dinucleotide (NADH) regeneration reaction were applied simultaneously. Various tetrazolium salts were screened to reveal visible color intensities capable of determining the lactate concentrations in the sample. The optimal analysis conditions were as follows. The diaphorase (0.5 μl, 2(-6)U/μl) was immobilized in the test line of the ECT strip. Nitrotetrazolium blue chloride (5 μl, 12 mM), l-lactate dehydrogenase (1 μl, 0.25U/μl), and NAD(+) (2μl, 1.5×10(-5)M) were added into the mobile phase (100 μl) composed of 0.1% (w/w) Tween 20 in 10mM phosphate buffer (pH 9.0), and the process was left to run for 10 min. This detection had a linear range of 0.039 to 5mM with a detection limit of 0.047 mM. This quantitative analysis process for l-lactate was easy to operate with good stability and was proper for the point-of-care testing applications.

Fluorescent hydrogen peroxide sensor based on cupric oxide nanoparticles and its application for glucose and L-lactate detection

A novel fluorescent hydrogen peroxide sensor was developed based on the peroxidase-like activity of cupric oxide nanoparticles. Cupric oxide nanoparticles effectively catalyzed the decomposition of hydrogen peroxide into hydroxyl radicals. Then terephthalic acid was oxidized by hydroxyl radical to form a highly fluorescent product. The linear range of hydrogen peroxide estimated to be 5.0 × 10(-6)-2.0 × 10(-4)M with a detection limit of 3.4 × 10(-7)M. Moreover, this detection system enabled the sensing of analytes which can enzymatically generate hydrogen peroxide. By coupling the oxidation of glucose or L-lactate catalyzed by their corresponding oxidase enzymes with terephthalic acid oxidation catalyzed by cupric oxide nanoparticles, sensitive assays of glucose and l-lactate with detection limits of 1.0 × 10(-6) and 4.5 × 10(-8)M were realized. The successful applications of this approach in human serum samples have also been demonstrated.

Polyoxometalate@magnetic graphene as versatile immobilization matrix of Ru(bpy)3(2+) for sensitive magneto-controlled electrochemiluminescence sensor and its application in biosensing

We demonstrated here the exploration of polyoxometalate (POM) coated magnetic Fe3O4/reduced graphene oxide (POM@mrGO) composite as the versatile immobilization matrix for the electrochemiluminescence (ECL) agent Ru(bpy)3(2+). The effective modification of Ru(bpy)3(2+)/POM@mrGO hybrid simply involved using magnetic electrode showed 10-fold ECL intensity increase than that observed for Ru(bpy)3(2+)/Nafion@mrGO to the same concentration of nicotinamide adenine dinucleotide (NADH), which is largely due to POM׳s good electrocatalytic activity towards NADH oxidation. These findings allowed the stable and ultrasensitive ECL detection of NADH as low as 0.1 nM. The good stability and high sensitivity of the magneto-controlled ECL sensor enabled us to explore the feasibility of applying the sensing platform to fabricating the ECL biosensors in which the NADH was produced from the dehydrogenase-based enzymatic reaction in the presence of NAD(+) cofactor. With L-lactate dehydrogenase as a model, a L-lactate biosensor was successfully constructed where we showed that the ECL intensity of the biosensor increased with the increasing L-lactate concentration. Excellent performance of the presented biosensor has been achieved including a wide linear range extended from 5.0×10(-9) M to 5.0×10(-4) M and an extremely low detection limit of 0.4 nM. Such sensing strategy combines enzymatic selectivity with simple sensor preparation can be used as a new and biocompatible platform for dehydrogenase-based ECL biosensing.

Lactate biosensors: current status and outlook

Many research efforts over the last few decades have been devoted to sensing lactate as an important analytical target in clinical care, sport medicine, and food processing. Therefore, research in designing lactate sensors is no longer in its infancy and now is more directed toward viable sensors for direct applications. In this review, we provide an overview of the most immediate and relevant developments toward this end, and we discuss and assess common transduction approaches. Further, we critically describe the pros and cons of current commercial lactate sensors and envision how future sensing design may benefit from emerging new technologies.

Optical detection of single cell lactate release for cancer metabolic analysis

Sensitive detection of extracellular lactate concentrations at a single cell level is of importance for studying the metabolic alterations in tumor progression. A unique nanoscale optical fiber lactate sensor was developed to monitor the extracellular lactate concentrations of cancer cells by immobilizing its nanotip with lactate dehydrogenases, which could catalyze lactate conversion to generate NADH for sensitive fluorescence detection. The results demonstrate that the fabricated nanosensor can successfully detect the extracellular lactate concentrations for single HeLa, MCF-7, and human fetal osteoblast (hFOB) cells, showing that the cancer cells have distinctly higher extracellular lactate concentrations than normal cells as that predicted by Warburg effect. The nanosensor was also employed to investigate the effect of a monocarboxylate transporter inhibitor on the lactate efflux from cancer cells. Different lactate efflux inhibition profiles were obtained for HeLa and MCF-7 cell lines. This work demonstrates that the nanosensor has potential for evaluating the effect of metabolic agents on cancer metabolism and survival.

State-of-the-art of (bio)chemical sensor developments in analytical Spanish groups

(Bio)chemical sensors are one of the most exciting fields in analytical chemistry today. The development of these analytical devices simplifies and miniaturizes the whole analytical process. Although the initial expectation of the massive incorporation of sensors in routine analytical work has been truncated to some extent, in many other cases analytical methods based on sensor technology have solved important analytical problems. Many research groups are working in this field world-wide, reporting interesting results so far. Modestly, Spanish researchers have contributed to these recent developments. In this review, we summarize the more representative achievements carried out for these groups. They cover a wide variety of sensors, including optical, electrochemical, piezoelectric or electro-mechanical devices, used for laboratory or field analyses. The capabilities to be used in different applied areas are also critically discussed.

Disposable electrochemiluminescent biosensor for lactate determination in saliva

An electrochemiluminescence-based disposable biosensor for lactate is characterized. The lactate recognition system is based on lactate oxidase (LOx) and the transduction system consists of luminol. All the needed reagents, luminol, LOx, BSA, electrolyte and buffer have been immobilized by a Methocel membrane placed on the working electrode of the screen-printed electrochemical cell. The measurement of the electrochemiluminescence (ECL) is made possible via a photocounting head when 50 microl of sample is placed into the screen-printed cell with a circular container containing the disposable sensing membrane. The compositions of the membrane and reaction conditions have been optimized to obtain adequate sensitivity. The disposable biosensor responds to lactate after 20 s when two 1 s pulses at 0.5 V are applied to obtain the analytical parameter, the ECL initial rate. The linearized double logarithmic dependence for lactate shows a dynamic range from 10(-5) to 5 x 10(-4) M with a detection limit of 5 x 10(-6) M and a sensor-to-sensor repeatability, as relative standard deviation, RSD, of 3.30% at the medium level of the range. The ECL disposable biosensor was applied to the analysis of lactate in human saliva as an alternative procedure for obtaining the lactate level in a non-invasive way. Interferences coming from components of saliva were studied and eliminated in a simple way that was easy to handle. The procedure was validated for use in human saliva, comparing the results against an enzymatic reference procedure. The proposed method is quick, inexpensive, selective and sensitive and uses conventional ECL instrumentation.