A novel dispersive liquid–liquid microextraction based on solidification of floating organic droplet method for determination of polycyclic aromatic hydrocarbons in aqueous samples

Salt assisted liquid-liquid extraction combined with dispersive liquid-liquid microextraction for the determination of 24 regulated polycyclic aromatic hydrocarbons in human serum

Polycyclic aromatic hydrocarbons (PAHs) are persistent organic pollutants of great concern due to their carcinogenicity and mutagenicity. Their determination in human serum, particularly in at-risk populations, is necessary but difficult because they are distributed over a wide range of polarity and are present at trace level. A new method combining salting-out assisted liquid-liquid extraction (SALLE) and dispersive liquid-liquid microextraction with solidification of floating organic drop (DLLME-SFO) adapted to a reduced volume of sample (100 µl) was developed to determine 24 PAHs in human serum. Some key parameters of DLLME-SFO (volume of extraction solvent, ratio of extraction/dispersive solvent volumes, and salt addition) were first studied by applying it to spiked pure water. For its application to serum, a sample treatment step involving SALLE was optimized in terms of nature and content of salts and applied upstream of DLLME-SFO. It was applied to the extraction of 24 regulated PAHs from spiked serum followed by an analysis by liquid chromatography coupled with UV and fluorescence detection. The extraction recoveries ranged from 48.2 and 116.0 % (relative standard deviations: 2.0-14.6 %, n=5-9), leading to limits of quantification of PAHs in human serum from 0.04 to 1.03 µg/L using fluorescence detection and from 10 to 40 µg/L using UV detection. This final method combining SALLE and DLLME-SFO showed numerous advantages such as no evaporation step, high efficiency and low solvent-consumption and will be useful for monitoring PAHs in low volumes of serum.

The determination of thallium in the environment: A review of conventional and advanced techniques and applications

Thallium (Tl) is a potential toxicity element that poses significant ecological and environmental risks. Recently, a substantial amount of Tl has been released into the environment through natural and human activities, which attracts increasing attention. The determination of this hazardous and trace element is crucial for controlling its pollution. This article summarizes the advancement and progress in optimizing Tl detection techniques, including atomic absorption spectroscopy (AAS), voltammetry, inductively coupled plasma (ICP)-based methods, spectrophotometry, and X-ray-based methods. Additionally, it introduces sampling and pretreatment methods such as diffusive gradients in thin films (DGT), liquid-liquid extraction, solid phase extraction, and cloud point extraction. Among these techniques, ICP-mass spectrometry (MS) is the preferred choice for Tl detection due to its high precision in determining Tl as well as its species and isotopic composition. Meanwhile, some new materials and agents are employed in detection. The application of novel work electrode materials and chromogenic agents is discussed. Emphasis is placed on reducing solvent consumption and utilizing pretreatment techniques such as ultrasound-assisted processes and functionalized magnetic particles. Most detection is performed in aqueous matrices, while X-ray-based methods applied to solid phases are summarized which provide non-destructive analysis. This work improves the understanding of Tl determination technology while serving as a valuable resource for researchers seeking appropriate analytical techniques.

HPLC-FLD determination of aflatoxins M1 and M2 in raw cow milk samples using in-syringe gas-controlled density tunable solidification of a floating organic droplet-based dispersive liquid-liquid microextraction method

Herein, an in-syringe gas-controlled density tunable solidification of a floating organic droplet-based dispersive liquid-liquid microextraction method was employed for the extraction of aflatoxin M1 and M2 from cow milk samples prior to their quantification with high-performance liquid chromatography equipped with a fluorescence detector. In this method, after precipitating the proteins of the sample using a zinc sulfate solution, the supernatant phase was transferred into a barrel of a glass syringe, with the end closed with a septum containing a mixture of menthol, phenylacetic acid DES (as the extraction solvent), and chloroform (as a density modifier). After that, an inert gas was bubbled into the syringe. In this manner, chloroform was evaporated and fine droplets of extractant were released, which extracted the analytes during their passing. Finally, the syringe was placed in an ice bath and the obtained solidified drop was injected into the separation system after diluting with a mobile phase. Under the best analysis conditions, low limits of detection (1.45 and 1.86 ng L-1 for AFM1 and AFM2, respectively) and quantification (4.83 and 6.21 ng L-1 for AFM1 and AFM2, respectively), high extraction recovery (75 and 70% for AFM1 and AFM2, respectively), and good precision (relative standard deviations ≤ 4.8%) were obtained by employing the approach reported in this study. In the end, this method was successfully employed to determine AFM1 and AFM2 in raw cow milk samples collected from Tabriz, Iran.

Application of magnetic dispersive solid phase extraction combined with solidification of floating organic droplet-based dispersive liquid-liquid microextraction and GC-MS in the extraction and determination of polycyclic aromatic hydrocarbons in honey

A magnetic dispersive solid phase extraction method combined with solidification of floating organic droplet-based dispersive liquid-liquid microextraction has been validated for the extraction of polycyclic aromatic hydrocarbons from honey samples. For this purpose, a carbonised cellulose-ferromagnetic nanocomposite was used as a sorbent through the magnetic dispersive solid phase extraction. For preparation of the sorbent, first, carbonised cellulose nanoparticles were created by treating cellulose filter paper with concentrated solution of sulfuric acid. Then, the prepared nanoparticles were loaded onto Fe3O4 nanoparticles through coprecipitation. In the extraction process, first, a few mg of the sorbent was added to the diluted honey solution and dispersed in it using vortex agitation. The particles were then separated and the adsorbed analytes were eluted with an organic solvent. The eluent was taken and after mixing with a water-immiscible extraction solvent was used in the following solidification of floating organic droplet-based dispersive liquid-liquid microextraction procedure. By performing the extraction process under the obtained optimum conditions, low limits of detection (0.08-0.17 ng g-1) and quantification (0.27-0.57 ng g-1), satisfactory precision (relative standard deviations ≤ 5.0%), and wide linear range (0.57-500 ng g-1) with great coefficients of determination (r2≥ 0.9986) were obtained.

Microfluidic formation of surface nanodroplets using green deep eutectic solvents for liquid-liquid nanoextraction and controlled precipitation

HYPOTHESIS

Surface nanodroplets have recently been employed for in situ chemical analysis leveraging their low volume, e.g. O(10^-15 L), that enables rapid analyte extraction and pre-concentration. So far, most surface nanodroplets have been formed using single organic solvents such as 1-octanol, toluene, among others. Designing multicomponent surface nanodroplet with controllable composition is highly desirable for extending their application as extractant.

EXPERIMENT

Here, we formed surface nanodroplets using green deep eutectic solvent (gDES) composed of thymol and decanoic acid, both of which are naturally occurring chemicals. The influence of parameters such as flowrate and the composition of deep eutectic solvent on the surface nanodroplet formation were studied. As proof-of-concept, the gDES surface nanodroplets were further used to extract and detect trace amounts of fluorescent rhodamine 6G dye and copper ions from water.

FINDINGS

The formation of gDES surface nanodroplets follows the theoretical model which states that the final droplet volume (V_f) scales with the Peclét number (Pe) of the flow during formation by the solvent exchange process, that is V_f ∼ Pe^3/4, and the nanodroplets demonstrate excellent ability as extractant for rhodamine 6G and copper ions from water. Surprisingly, the confined volume of gDES surface nanodroplets enables fast and controlled formation of Cu (II)-decanoate crystal.

QuEChERS sample preparation integrated to dispersive liquid-liquid microextraction based on solidified floating organic droplet for spectrometric determination of sudan dyes: A synergistic approach

In this project, a synergistic approach has been proposed where a quick, easy, cheap, effective, rugged, and safe (QuEChERS) sample preparation technique was developed for the extraction of sudan III and sudan IV dyes in different spices prior to its dispersive liquid-liquid microextraction based on solidified floating organic droplet (DLLME-SFO). Initially, the sample was extracted by QuEChERS method and then preconcentrated through DLLME-SFO followed by spectrophotometric detection. All the experimental parameters i.e., volume of extraction solvent, pH, acetonitrile to water ratio, temperature, centrifugation rate and time, and sample volume were optimized. Limit of detection (LOD) calculated for sudan III and sudan IV were 0.42 and 0.35 mg/L, respectively. Excellent recoveries were obtained in the range of 98.29-99.88%. After validation through standard addition methodology, the developed QuEChERS@DLLME-SFO method was successfully applied to determine sudan (III-IV) dyes in real spices samples. Integration of QuEChERS and DLLME-SFO was found to be a suitable substitute to eliminate the usage of costly primary secondary amines and other sorbents. The synergistic approach of QuEChERS and DLLME-SFO with the aid of UV/visible spectrophotometry makes it prompt, cost effective technique with excellent analytical figures of merit.

Deep Eutectic Solvents as Promising Green Solvents in Dispersive Liquid-Liquid Microextraction Based on Solidification of Floating Organic Droplet: Recent Applications, Challenges and Future Perspectives

Deep eutectic solvents (DESs) have recently attracted attention as a promising green alternative to conventional hazardous solvents by virtue of their simple preparation, low cost, and biodegradability. Even though the application of DESs in analytical chemistry is still in its early stages, the number of publications on this topic is growing. Analytical procedures applying dispersive liquid-liquid microextraction based on the solidification of floating organic droplets (DLLME-SFOD) are among the more appealing approaches where DESs have been found to be applicable. Herein, we provide a summary of the articles that are concerned with the application of DESs in the DLLME-SFOD of target analytes from diverse samples to provide up-to-date knowledge in this area. In addition, the major variables influencing enrichment efficiency and the microextraction mechanism are fully investigated and explained. Finally, the challenges and future perspectives of applying DESs in DLLME-SFOD are thoroughly discussed and are critically analyzed.

Trace detection of polycyclic aromatic hydrocarbons in environmental waters by SERS

Polycyclic aromatic hydrocarbons (PAHs) are among the most hazardous pollutants and have attracted significant attention in the last decades. Up to now, rapid and on-site trace detection of PAHs remains a challenging issue. Here, taking advantage of the high sensitivity and reliable qualification of Surface-enhanced Raman Spectroscopy (SERS), we firstly carried out trace analyses of 16 typical PAHs in water at concentrations as low as 100-0.1 μg/L, depending on the number of aromatic rings of the molecule. Furthermore, owing to the simplicity of the liquid-liquid extraction (LLE) step, the sensitivity was further improved 2-3 orders of magnitude, and the lowest detectable concentrations were 100, 50, and 5 ng/L for anthracene, pyrene, and benzo[a]pyrene (the three PAHs typically found in heavily polluted waters), respectively. The LLE-SERS approach was successfully applied to the qualitative and quantitative analyses of different (ocean and coast) water samples being spiked by these three PAHs, which showed great promise as a trace detection tool of PAHs under water environments having different contaminant matrices.

Dispersive liquid-liquid microextraction based on the solidification of floating organic droplets for HPLC determination of three strobilurin fungicides in cereals

In this paper, a dispersive liquid-liquid microextraction method based on the solidification of floating organic droplets, combined with high-performance liquid chromatography (DLLME-SFOD-HPLC), was developed for the detection of strobilurin fungicides (azoxystrobin, pyraclostrobin, and trifloxystrobin) in cereals. Natural fatty acids were used as an extractant and have low toxicity, density, and freezing point. The extractant nonanoic acid was evenly dispersed as droplets in sample solution and was then solidified in the upper layer of sample solution after centrifugation and ice bath, which improved the extraction and collection efficiency. The dispersive liquid-liquid microextraction procedure was optimised by univariate analysis and the Box-Behnken response surface methodology. Optimum conditions were as follows: the volume of nonanoic acid was 82 μL, the volume of acetonitrile was 620 μL, and the amount of salt was 256 mg. Under optimised conditions, the method had good linearity with a correlation coefficient higher than 0.997, and the limit of detection was 2.57-4.87 μg kg^-1. The recoveries of azoxystrobin, pyraclostrobin, and trifloxystrobin in rice, corn, and wheat were 82.0%-93.2%, and the relative standard deviations were 1.6%-7.4%. Therefore, the method was successfully applied to detect target fungicides in cereals.

Hollow fiber-based liquid phase microextraction followed by analytical instrumental techniques for quantitative analysis of heavy metal ions and pharmaceuticals

Hollow-fiber liquid-phase microextraction (HF-LPME) and electromembrane extraction (EME) are miniaturized extraction techniques, and have been coupled with various analytical instruments for trace analysis of heavy metals, drugs and other organic compounds, in recent years. HF-LPME and EME provide high selectivity, efficient sample cleanup and enrichment, and reduce the consumption of organic solvents to a few micro-liters per sample. HF-LPME and EME are compatible with different analytical instruments for chromatography, electrophoresis, atomic spectroscopy, mass spectrometry, and electrochemical detection. HF-LPME and EME have gained significant popularity during the recent years. This review focuses on hollow fiber based techniques (especially HF-LPME and EME) of heavy metals and pharmaceuticals (published 2017 to May 2019), and their combinations with atomic spectroscopy, UV-VIS spectrophotometry, high performance liquid chromatography, gas chromatography, capillary electrophoresis, and voltammetry.

A novel switchable solvent liquid-phase microextraction technique based on the solidification of floating organic droplets: HPLC-FLD analysis of polycyclic aromatic hydrocarbon monohydroxy metabolites in urine samples

A novel switchable solvent liquid-phase microextraction technique, based on the solidification of floating organic droplets (SS-LPME-SFO), was developed for the pretreatment of aqueous samples.

Solvent demulsification-dispersive liquid-liquid microextraction based on solidification of floating organic drop coupled with ultra-high-performance liquid chromatography-tandem mass spectrometry for simultaneous determination of 13 organophosphate esters in aqueous samples

This study developed a novel method for the determination of 13 organophosphate esters (OPEs) in aqueous samples through the optimization of solvent demulsification-dispersive liquid-liquid microextraction based on solidification of floating organic drop procedure coupled with ultra-high-performance liquid chromatography-tandem mass spectrometry. The proposed method was rapid and accurate and could be used in field applications. Under the most suitable conditions, the limit of detection and limit of quantification ranged from 0.16 ng/L to 20.0 ng/L and from 0.55 ng/L to 66.7 ng/L, respectively. The enrichment factors (EFs) ranged from 30 to 46. The relative standard deviations were less than 15%. The spiked recoveries ranged between 68.2% and 97.7% in the analysis of actual aqueous samples. The proposed method was convenient, environment friendly, and time and solvent saving and could be used in field applications compared with other methods. Various concentrations and types of OPEs were detected in tap water, river water, and effluent of sewage treatment plant. Effluent samples had the highest detected levels and types of OPEs.

Recent advances in microextraction procedures for determination of amphetamines in biological samples

Amphetamine and its related derivatives have stimulant and hallucinogenic properties. Illegal use of these drugs is an increasing global problem resulting in significant public health and legal problems. Deaths have been reported after intake of these drugs due to overdose. It is important to determine the type and concentration of illicit drugs in biological samples. These compounds are found in complex matrices at low concentration levels. The microextraction techniques are dominant sample preparation procedure and they are widely accepted as the most labor-intensive part of the bioanalytical process. For this purpose, a survey of recent published advances in microextraction procedures for quantification of amphetamines in biological samples found in the different databases from 2008 to date will be conducted.

Characterization of a Microbial Consortium for the Bioremoval of Polycyclic Aromatic Hydrocarbons (PAHs) in Water

Pollution of freshwater ecosystems from polycyclic aromatic hydrocarbons (PAHs) is a global concern. The US Environmental Protection Agency (EPA) has included the PAHs pyrene, phenanthrene, and naphthalene among the 16 priority compounds of special concern for their toxicological effects. The aim of this study was to adapt and characterize a microbial consortium from ore waste with the potential to remove these three PAHs from water. This microbial consortium was exposed to the target PAHs at levels of 5, 10, 20, 50, and 100 mg L−1 for 14 days. PAH bioremoval was measured using the analytical technique of solid phase microextraction, followed by gas chromatography mass spectrometry (SPME-GC/MS). The results revealed that up to 90% of the target PAHs can be removed from water after 14 days at a concentration level of 100 mg L−1. The predominant group of microorganisms identified at the phylum taxonomic level were the Proteobacteria, while the Actinobacteria were the predominant subgroup. The removal of phenanthrene, naphthalene, and pyrene predominantly occurred in specimens of genera Stenotrophomonas, Williamsia, and Chitinophagaceae, respectively. This study demonstrates that the use of specific microorganisms is an alternative method of reducing PAH levels in water.

Determining heterocyclic aromatic amines in aqueous samples: A novel dispersive liquid-liquid micro-extraction method based on solidification of floating organic drop and ultrasound assisted back extraction followed by UPLC-MS/MS

A novel dispersive liquid-liquid microextraction based on solidification of floating organic droplet combined with ultrasound assisted back extraction for the determination of four heterocyclic aromatic amines in natural water samples prior ultra high-performance liquid chromatography-tandem mass spectrometry was developed. The analytes were extracted from the water samples by a dispersive liquid-liquid microextraction procedure based on solidification of floating organic drop, which was performed by a mixture composed by a less dense than water extraction solvent, 1-undecanol, and a dispersive solvent, methanol. After that, a novel ultrasound assisted back extraction step was performed in order to make the clean-up/enrichment procedure compatible with the detection requirements. Under optimum conditions, linearity ranged from 2.2 to 50ngmL^-1, with enrichment factors from 130 to 136-folds. Thus limits of detection between 0.7 and 2.9ngmL^-1 were obtained. Precision of the method was evaluated in terms of repeatability, relative standard deviations varied from 4.3% to 6.7%. Relative recoveries ranged from 92% to 106% for all analytes. The satisfactory performance demonstrated that the proposed methodology has a strong potential for application in the multi-residue analysis of heterocyclic aromatic amines present in complex environmental matrices.

Application of hollow fiber liquid phase microextraction and dispersive liquid–liquid microextraction techniques in analytical toxicology

The recent developments in hollow fiber liquid phase microextraction and dispersive liquid –liquid microextraction are reviewed. Applications of these newly emerging developments in extraction and preconcentration of a vast category of compounds including heavy metals, pesticides, pharmaceuticals and abused drugs in complex matrices (environmental and biological matrices) are reviewed and discussed. The new developments in these techniques including the use of solvents lighter than water, ionic liquids and supramolecular solvents are also considered. Applications of these new solvents reduce the use of toxic solvents and eliminate the centrifugation step, which reduces the extraction time.

Agarose- and alginate-based biopolymers for sample preparation: Excellent green extraction tools for this century

Recently, there has been considerable interest in the use of miniaturized sample preparation techniques before the chromatographic monitoring of the analytes in unknown complex compositions. The use of biopolymer-based sorbents in solid-phase microextraction techniques has achieved a good reputation. A great variety of polysaccharides can be extracted from marine plants or microorganisms. Seaweeds are the major sources of polysaccharides such as alginate, agar, agarose, as well as carrageenans. Agarose and alginate (green biopolymers) have been manipulated for different microextraction approaches. The present review is focused on the classification of biopolymer and their applications in multidisciplinary research. Besides, efforts have been made to discuss the state-of-the-art of the new microextraction techniques that utilize commercial biopolymer interfaces such as agarose in liquid-phase microextraction and solid-phase microextraction.