Potential of high temperature liquid chromatography for the improvement of separation efficiency—A review

Toward an Ultimate Solution for Peptide Retention Time Prediction: The Effect of Column Temperature on Separation Selectivity

We studied the effect of the column temperature on the selectivity of reversed-phase peptide separation in bottom-up proteomics. The number of peptide identifications from 2 h liquid chromatography with tandem mass spectrometry (LC-MS/MS) acquisitions reaches a plateau at 45-55 °C, driven simultaneously by improved separation efficiency, a gradual decrease in peptide retention, and possible on-column degradation of peptides at elevated temperatures. Performing 2D LC-MS/MS acquisitions at 25, 35, 45, and 55 °C resulted in the identification of ∼100,000 and ∼120,000 unique peptides for nonmodified and tandem mass tags (TMT)-labeled samples, respectively. These peptide collections were used to investigate the temperature-driven retention features. The latter is governed by the specific temperature response of individual residues, peptide hydrophobicity and length, and amphipathic helicity. On average, peptide retention decreased by 0.56 and 0.5% acetonitrile for each 10 °C increase for label-free and TMT-labeled peptides, respectively. This generally linear response of retention shifts allowed the extrapolation of predictive models beyond the studied temperature range. Thus, (trap) column cooling from room temperature to 0 °C will allow the retention of an additional 3% of detectable tryptic peptides. Meanwhile, the application of 90 °C would result in the loss of ∼20% of tryptic peptides that were amenable to MS/MS-based identification.

High-temperature ultrafast ChipHPLC-MS

Herein, we present a miniaturized chip-based HPLC approach coupled to electrospray ionization mass spectrometry utilizing temperature to achieve high-speed separations. The approach benefits from the low thermal mass of the microfluidic chip and can form an electrospray from the pre-heated mobile phase. With the help of this technology, isothermal and temperature-programmable operations up to 130°C were pursued to perform reversed-phase separations of pesticides in methanol and ethanol-containing eluents in less than 20 s.

Mechanistic study of ultrasound-assisted chromatography using plastic and stainless steel columns

Based on the previous ultrasound-assisted chromatography (UAC) studies on plastic and stainless steel (SS) columns, this study explores the UAC mechanism by comparatively analyzing ultrasound effects on plastic and SS columns with C18 stationary phase when separating a mixture of polycyclic aromatic hydrocarbons (PAHs) under various ultrasound intensities. The results showed a substantial difference in H values between the PEEK and SS columns under the influence of ultrasound agitation. Specifically, for the pyrene peak, as the ultrasonic intensity increased from 0% to 100% of 900 W, the H values of the SS column slightly rose from 8.82 μm to 9.86 μm. Conversely, the corresponding values for the PEEK column exhibited a significant 12-fold increase from 11.5 μm to 134 μm. The findings demonstrated poor penetration of ultrasound energy through the SS column, and the temperature rise of the medium induced by the ultrasound was the primary contributing factor to PAH separation. However, ultrasound easily penetrated through the plastic column, resulting in acoustic cavitation within the C18 polyether ether ketone (PEEK) column. Cavitation induced heat generation and contributed to a decrease in retention time and the magnitude of peak broadening or distortion, depending on the specific ultrasonic energy. Based on the estimated change in inlet temperature of the PEEK column due to an acoustic effect, the comparison with temperature effects under non-sonic conditions consistently demonstrated a stronger acoustic effect in reducing the retention time, by 2-9%, depending on specific peaks and pairs. We revisited the previously described separation mechanism of ultrasound-assisted ion chromatography and conjoined with our findings to infer and establish a thorough explanation for the previously unexplained separation mechanism of chiral separation and size exclusion chromatography by UAC using SS columns.

Improvement of chiral separation efficiency through temperature control during one time high performance liquid chromatography analysis

This study examined how manual temperature control affects the separation of two enantiomers of five racemic mixtures using high-performance liquid chromatography (HPLC) in terms of separation factor (α), resolution (Rs), and the number of theoretical plates (N). The results showed that heating/cooling during one time HPLC analysis improved the separation factor and resolution.

Thermally controlled microfluidic back pressure regulator

By using the temperature dependence of viscosity, we introduce a novel type of microfluidic lab-on-a-chip back pressure regulator (BPR) that can be integrated into a micro-total-analysis-system. A BPR is an important component used to gain pressure control and maintain elevated pressures in e.g. chemical extractions, synthesis, and analyses. Such applications have been limited in microfluidics, since the back pressure regularly has been attained by passive restrictors or external large-scale BPRs. Herein, an active microfluidic BPR is presented, consisting of a glass chip with integrated thin-film heaters and thermal sensors. It has no moving parts but a fluid restrictor where the flow resistance is controlled by the change of viscosity with temperature. Performance was evaluated by regulating the upstream pressure of methanol or water using a PID controller. The developed BPR has the smallest reported dead volume of 3 nL and the thermal actuation has time constants of a few seconds. The pressure regulation were reproducible with a precision in the millibar range, limited by the pressure sensor. The time constant of the pressure changes was evaluated and its dependence of the total upstream volume and the compressibility of the liquids is introduced.

Sense and Nonsense of Elevated Column Temperature in Proteomic Bottom-up LC-MS Analyses

Elevated column temperature represents a simple means for improving chromatographic separation of peptides. Here, we demonstrated the advantages of the column temperature in peptide separation using state-of-the-art columns. More importantly, we also determined how temperature can impair proteomic bottom-up analyses. We found that an elevated temperature in combination with the acidic pH of the mobile phase induced in-column peptide hydrolysis with high specificity to Asp and accelerated five modification reactions of amino acids. The positive effects of temperature dominated in the 30 min long gradients since the column operated at 90 °C provided the largest number of identified peptides and proteins. However, the adverse effects of temperature on peptide integrity in longer liquid chromatography-mass spectrometry (LC-MS) analyses required its reduction to obtain optimum results. The largest number of peptides was identified using the column maintained at 75 °C in 60 min long gradients, at 60 °C in 120 min long gradients, and at 45 °C in 240 min long gradients. Our results indicate that no universal column temperature exists for bottom-up LC-MS analyses. Quite the contrary, the temperature setting must be selected rationally to exploit the full capabilities of the state-of-the-art mass spectrometers in proteomic LC-MS analyses, with the gradient time being a critical factor.

Investigating the use of unconventional temperatures in supercritical fluid chromatography

The use of unorthodox temperatures, ranging from -5 °C up to 80 °C, have been thoroughly investigated in supercritical fluid chromatography. To this purpose, an initial evaluation of the kinetic and thermodynamic performance has been made with a set of 4 analytes eluting at different percentages of organic co-solvent in the mobile phase (3%-10% - 45%-80%). The van Deemter plots have demonstrated how, at low organic modifier presence, the use of low temperatures did not necessarily translate into worse performance, while high temperatures could pose more issues due to the poor handling of the super/subcritical mobile phase by the chromatographic system. With important percentages of co-solvent, however, high temperatures were fundamental in ensuring better profiles of the van Deemter plots, compared to low temperatures. Pressure plots have demonstrated that gradients reaching elevated percentages of organic modifiers can also be used on stationary phases packed with sub 2 μm silica particles if high temperatures are employed. The thermodynamic evaluation, made via the analysis of van't Hoff plots, indicates the presence of three retention behaviors happening in UHPSFC when switching from high to low temperatures, depending on the co-solvent percentage needed to elute one analyte. Finally, an assessment of the stationary phase stability at high temperatures was performed: the retention times variabilities recorded were minimal (RSD < 2.5%), as well as the peak widths and inlet column pressures were somewhat constant throughout the analyses. In the second part of this study, a focus on potential applications benefiting from such unconventional temperatures has been made. A series of challenging analytes have experienced better chromatographic resolution at either high or low temperatures, providing therefore a potentially interesting tool to analysts during the chromatographic method development process. In conclusion, the UV sensitivity at different temperatures was also taken into consideration, with no significant impact on the quality of the UV signal under any condition.

Bioanalytical method validation for the quantification of the chlorogenic acid in Capsicum baccatum through High Performance Liquid Chromatography (HPLC-DAD)

The fruit pulp extracts of the species Capsicum baccatum are associated with a number of phenolic compounds. The aim of this study was to validate a bioanalytical method for the quantification of the chlorogenic acid present in the UENF 1613 de C. baccatum accession. The quantification was carried out through HPLC. The results obtained for the extract of C. baccatum indicated selectivity for chlorogenic acid. The values obtained for relative standard deviation, as well as for precision, in terms of repeatability and intermediate precision, did not exceed the maximum of 15% set in the criteria for the acceptance of bioanalytical methods. In terms of recovery, the accuracy rate for the phenolic compound of interest was from 77 to 93%. The validated method through external standardization was applied for the quantification of chlorogenic acid of the UENF accession.

Temperature-programmed capillary high-performance liquid chromatography with atmospheric pressure chemical ionization mass spectrometry for analysis of fatty acid methyl esters

A new capillary high-performance liquid chromatography method with atmospheric pressure chemical ionization mass spectrometry was developed for the analysis of fatty acid methyl esters and long-chain alcohols. The chromatographic separation was achieved using a Zorbax SB-C18 HPLC column (0.3 × 150 mm, 3.5 μm) with a mobile phase composed of acetonitrile and formic acid and delivered isocratically at a flow rate of 10 μL/min. The column temperature was programmed simply, using a common column oven. Good reproducibility of the temperature profile and retention times were achieved. The temperature programming during the isocratic high-performance liquid chromatography run had a similar effect as a solvent gradient; it reduced retention times of later eluting analytes and improved their detection limits. Two atmospheric pressure chemical ionization sources of the mass spectrometry detector were compared: an enclosed conventional ion source and an in-house made ion source with a glass microchip nebulizer. The enclosed source provided better detectability of saturated fatty acid methyl esters and made it possible to determine the double bond positions using acetonitrile-related adducts, while the open chip-based source provided better analytical figures of merit for unsaturated fatty acid methyl esters. Temperature-programmed capillary high-performance liquid chromatography is a promising method for analyzing neutral lipids in lipidomics and other applications.

High-Temperature Liquid Chromatography and the Hyphenation with Mass Spectrometry Using High-Pressure Electrospray Ionization

Increasing the operating temperature of the liquid chromatography (LC) column has the same effect as reducing the diameter of the packing particles on minimizing the contribution of C-term in the van Deemter equation, flattening the curve of plate height vs. linear velocity in the high-speed region, thus allowing a fast LC analysis without the loss of plate count. While the use of smaller particles requires a higher pumping pressure, operating the column at higher temperature reduces the pressure due to lower liquid viscosity. At present, the adoption of high-temperature LC lags behind the ultra-high-pressure LC. Nevertheless, the availability of thermally stable columns has steadily improved and new innovations in this area have continued to emerge. This paper gives a brief review and updates on the recent advances in high-temperature liquid chromatography (HTLC). Recent efforts of hyphenating the capillary HTLC with mass spectrometry via a super-atmospheric pressure electrospray ionization is also reported.

Recent Trends in Fast Liquid Chromatography for Pharmaceutical Analysis

Background:

Liquid chromatography is the workhorse of analytical laboratories of pharmaceutical companies for analysis of bulk drug materials, intermediates, drug products, impurities and degradation products. This efficient technique is impeded by its long and tedious analysis procedures. Continuous efforts of scientists to reduce the analysis time resulted in the development of three different approaches namely, HTLC, chromatography using monolithic columns and UHPLC.

Methods:

Modern column technology and advances in chromatographic stationary phase including silica-based monolithic columns and reduction in particle and column size (UHPLC) have not only revolutionized the separation power of chromatographic analysis but also have remarkably reduced the analysis time. Automated ultra high-performance chromatographic systems equipped with state-ofthe- art software and detection systems have now spawned a new field of analysis, termed as Fast Liquid Chromatography (FLC). The chromatographic approaches that can be included in FLC are hightemperature liquid chromatography, chromatography using monolithic column, and ultrahigh performance liquid chromatography.

Results:

This review summarizes the progress of FLC in pharmaceutical analysis during the period from year 2008 to 2017 focusing on detecting pharmaceutical drugs in various matrices, characterizing active compounds of natural products, and drug metabolites. High temperature, change in the mobile phase, use of monolithic columns, new non-porous, semi-porous and fully porous reduced particle size of/less than 3μm packed columns technology with high-pressure pumps have been extensively studied and successively applied to real samples. These factors revolutionized the fast high-performance separations.

Conclusion:

Taking into account the recent development in fast liquid chromatography approaches, future trends can be clearly predicated. UHPLC must be the most popular approach followed by the use of monolithic columns. Use of high temperatures during analysis is not a feasible approach especially for pharmaceutical analysis due to thermosensitive nature of analytes.

Advances in Chemical and Biological Methods to Identify Microorganisms-From Past to Present

Fast detection and identification of microorganisms is a challenging and significant feature from industry to medicine. Standard approaches are known to be very time-consuming and labor-intensive (e.g., culture media and biochemical tests). Conversely, screening techniques demand a quick and low-cost grouping of bacterial/fungal isolates and current analysis call for broad reports of microorganisms, involving the application of molecular techniques (e.g., 16S ribosomal RNA gene sequencing based on polymerase chain reaction). The goal of this review is to present the past and the present methods of detection and identification of microorganisms, and to discuss their advantages and their limitations.

Conventional-Flow Liquid Chromatography-Mass Spectrometry for Exploratory Bottom-Up Proteomic Analyses

Due to its sensitivity and productivity, bottom-up proteomics based on liquid chromatography-mass spectrometry (LC-MS) has become the core approach in the field. The de facto standard LC-MS platform for proteomics operates at sub-μL/min flow rates, and nanospray is required for efficiently introducing peptides into a mass spectrometer. Although this is almost a "dogma", this view is being reconsidered in light of developments in highly efficient chromatographic columns, and especially with the introduction of exceptionally sensitive MS instruments. Although conventional-flow LC-MS platforms have recently penetrated targeted proteomics successfully, their possibilities in discovery-oriented proteomics have not yet been thoroughly explored. Our objective was to determine what are the extra costs and what optimization and adjustments to a conventional-flow LC-MS system must be undertaken to identify a comparable number of proteins as can be identified on a nanoLC-MS system. We demonstrate that the amount of a complex tryptic digest needed for comparable proteome coverage can be roughly 5-fold greater, providing the column dimensions are properly chosen, extra-column peak dispersion is minimized, column temperature and flow rate are set to levels appropriate for peptide separation, and the composition of mobile phases is fine-tuned. Indeed, we identified 2 835 proteins from 2 μg of HeLa cells tryptic digest separated during a 60 min gradient at 68 μL/min on a 1.0 mm × 250 mm column held at 55 °C and using an aqua-acetonitrile mobile phases containing 0.1% formic acid, 0.4% acetic acid, and 3% dimethyl sulfoxide. Our results document that conventional-flow LC-MS is an attractive alternative for bottom-up exploratory proteomics.

A multidimensional fractionation protocol for the oligomer analysis of oxidized waxes

Oxidized waxes possess far superior properties as compared to the alkanes they are derived from. The separation of alkane oligomers via gas chromatography (GC) becomes a challenge when polar oxygen-containing functional groups are introduced or when higher molar masses are targeted. In the present study, the separation and analysis of oligomers in oxidized and non-oxidized waxes using different liquid chromatographic techniques are investigated. Oligomers in two oxidized waxes and a non-oxidized wax from which they are derived, are separated using high-temperature solvent gradient interaction chromatography (HT-SGIC) and high-temperature two-dimensional liquid chromatography (HT-2D-LC). Evaporative light scattering detector conditions are tailored to provide the best detection with the solvent system at use. It is shown that oligomers in oxidized and non-oxidized waxes can be separated and identified using the mentioned techniques. It has been found that the ELSD detector response systematically decreases as the oxidation levels of the waxes increase. Coupling of HT-HPLC and high-temperature size exclusion chromatography (HT-SEC) in a comprehensive 2D-LC setup shows a broadening of the molar mass distributions of the lower oligomer fractions as a consequence of the modification indicating changes in the oligomer chain microstructures. A preparative fractionation technique is utilized to collect specific oligomer fractions from the bulk waxes followed by hyphenation to HT-HPLC and other techniques. HPLC is shown to provide more detailed information on the oligomer composition of waxes when coupled to a pre-fractionation technique.

Retention of small molecules on polymethacrylate monolithic capillary columns

In this paper, the concentration of N-isopropylacrylamide in the polymerization mixture has been varied to prepare several polymethacrylate monolithic capillary columns. Polymer monoliths combining N-isopropylacrylamide with zwitterion monomer, as well as various dimethacrylate crosslinking monomers have been prepared and characterized. Uracil, thiourea, phenol, toluene, ethylbenzene, propylbenzene, and butylbenzene have been used to characterize retention of prepared capillary columns in the mobile phases with 40-95% of acetonitrile and at working temperatures ranging from 25 to 60°C. By an optimization of six-parameter polynomial models we have found that the retention of small molecules is affected mainly by the concentration of the acetonitrile in the mobile phase with very low contribution of working temperature and combined effect of acetonitrile concentration and temperature. Concentration of the mobile phase controlled also enthalpy of the retention. On the other hand, entropic contribution was almost insensitive to the change of the mobile phase composition, especially for mobile phases containing more than 60% of acetonitrile.

Evolution in miniaturized column liquid chromatography instrumentation and applications: An overview

The purpose of this article is to underline the miniaturized LC instrumental system and describe the evolution of commercially available systems by discussing their advantages and drawbacks. Nowadays, there are already many miniaturized LC systems available with a great variety of pump design, interface and detectors as well as efficient columns technologies and reduced connections devices. The solvent delivery systems are able to drive the mobile phase without flow splitters and promote gradient elution using either dual piston reciprocating or syringe-type pumps. The mass spectrometry as detection system is the most widely used detection system; among many alternative ionization sources direct-EI LC-MS is a promising alternative to APCI. In addition, capillary columns are now available showing many possibilities of stationary phases, inner diameters and hardware materials. This review provides a discussion about miniaturized LC demonstrating fundamentals and instrumentals' aspects of the commercially available miniaturized LC instrumental system mainly nano and micro LC formats. This review also covers the recent developments and trends in instrumentation, capillary and nano columns, and several applications of this very important and promising field.

Two variables dominating the retention of intact proteins under gradient elution with simultaneous ultrafast high-resolution separation by hydrophobic interaction chromatography

The retention of proteins under gradient elution in HIC is dominated by two variables of steady and migration regions.

Temperature-assisted on-column solute focusing: a general method to reduce pre-column dispersion in capillary high performance liquid chromatography

Solvent-based on-column focusing is a powerful and well known approach for reducing the impact of pre-column dispersion in liquid chromatography. Here we describe an orthogonal temperature-based approach to focusing called temperature-assisted on-column solute focusing (TASF). TASF is founded on the same principles as the more commonly used solvent-based method wherein transient conditions are created that lead to high solute retention at the column inlet. Combining the low thermal mass of capillary columns and the temperature dependence of solute retention TASF is used effectively to compress injection bands at the head of the column through the transient reduction in column temperature to 5°C for a defined 7mm segment of a 6cm long 150μm I.D. column. Following the 30s focusing time, the column temperature is increased rapidly to the separation temperature of 60°C releasing the focused band of analytes. We developed a model to simulate TASF separations based on solute retention enthalpies, focusing temperature, focusing time, and column parameters. This model guides the systematic study of the influence of sample injection volume on column performance. All samples have solvent compositions matching the mobile phase. Over the 45-1050nL injection volume range evaluated, TASF reduces the peak width for all solutes with k' greater than or equal to 2.5, relative to controls. Peak widths resulting from injection volumes up to 1.3 times the column fluid volume with TASF are less than 5% larger than peak widths from a 45nL injection without TASF (0.07 times the column liquid volume). The TASF approach reduced concentration detection limits by a factor of 12.5 relative to a small volume injection for low concentration samples. TASF is orthogonal to the solvent focusing method. Thus, it can be used where on-column focusing is required, but where implementation of solvent-based focusing is difficult.

Maximizing the speed of separations for industrial problems

Recent improvement efforts in chromatography have provided great improvements in the rate of plate production, but less attention has been spent on optimizing the kinds of problems that are most often encountered in industry. When factors are not independent in their effects on the responses of a chromatographic separation, all adjustable factors must be considered in concert in seeking the best or optimum condition that solves the problem. This requires careful attention to specifying the goals, the adjustable factors, and the constraints required to make sure the outcome can actually be implemented. Strategies for optimizing assay and screening methods in the context of industrial needs are presented. Expanding the factor space of the system being investigated can lead to better outcomes. The prospect of adding column-outlet pressure control and expanding the mobile phase composition to include condensed gases or supercritical fluids is explored. Reversed-phase liquid chromatography, hydrophilic interaction chromatography, electrostatic repulsion hydrophilic interaction chromatography, and supercritical fluid chromatography are contiguous with regard to mobile phase characteristics. Adjustment of selectivity through instrument-controlled factors can benefit method development. Opportunities obtained by blending modifiers, varying temperature and pressure with compressible mobile phases, and controlling pH are discussed in the context of optimizing methods.

Subzero temperature chromatography for reduced back-exchange and improved dynamic range in amide hydrogen/deuterium exchange mass spectrometry

Amide hydrogen/deuterium exchange is a commonly used technique for studying the dynamics of proteins and their interactions with other proteins or ligands. When coupled with liquid chromatography and mass spectrometry, hydrogen/deuterium exchange provides several unique advantages over other structural characterization techniques including very high sensitivity, the ability to analyze proteins in complex environments, and a large mass range. A fundamental limitation of the technique arises from the loss of the deuterium label (back-exchange) during the course of the analysis. A method to limit loss of the label during the separation stage of the analysis using subzero temperature reversed-phase chromatography is presented. The approach is facilitated by the use of buffer modifiers that prevent freezing. We evaluated ethylene glycol, dimethyl formamide, formamide, and methanol for their freezing point suppression capabilities, effects on peptide retention, and their compatibilities with electrospray ionization. Ethylene glycol was used extensively because of its good electrospray ionization compatibility; however, formamide has potential to be a superior modifier if detrimental effects on ionization can be overcome. It is demonstrated using suitable buffer modifiers that separations can be performed at temperatures as low as -30 °C with negligible loss of the deuterium label, even during long chromatographic separations. The reduction in back-exchange is shown to increase the dynamic range of hydrogen/deuterium exchange mass spectrometry in terms of mixture complexity and the magnitude with which changes in deuteration level can be quantified.