Determination of monoamine neurotransmitters and their metabolites in a mouse brain microdialysate by coupling high-performance liquid chromatography with gold nanoparticle-initiated chemiluminescence

Interfacial galvanic replacement strategy for Pd-doped NiFe MOF nanosheets with highly efficient dopamine detection

An interfacial galvanic replacement strategy to controllable synthesize palladium nanoparticles (Pd NPs)-modified NiFe MOF nanocomposite on nickel foam, which served as an efficient sensing platform for quantitative determination of dopamine (DA). Pd NPs grown in situ on the nanosheets of NiFe MOF via self-driven galvanic replacement reaction (GRR) and well uniform distribution was achieved. This method effectively reduced the aggregation of metallic nanoparticles and significantly promoted the electron transfer rate during the electrochemical process, leading to improved electrocatalytic activity for DA oxidation. Remarkably, the precisely constructed biosensor achieved a low detection limit (LOD) of 0.068 µM and recovery of 94.1% (RSD 6.7%, N = 3) for simulated real sample detection and also exhibited superior selectivity and stability. The results confirmed that the as-fabricated Pd-NiFe/NF composite electrode could realize the quantitative determination of DA and showed promising prospects in real sample biosensing.

Co-based Nanozymatic Profiling: Advances Spanning Chemistry, Biomedical, and Environmental Sciences

Nanozymes, next-generation enzyme-mimicking nanomaterials, have entered an era of rational design; among them, Co-based nanozymes have emerged as captivating players over times. Co-based nanozymes have been developed and have garnered significant attention over the past five years. Their extraordinary properties, including regulatable enzymatic activity, stability, and multifunctionality stemming from magnetic properties, photothermal conversion effects, cavitation effects, and relaxation efficiency, have made Co-based nanozymes a rising star. This review presents the first comprehensive profiling of the Co-based nanozymes in the chemistry, biology, and environmental sciences. The review begins by scrutinizing the various synthetic methods employed for Co-based nanozyme fabrication, such as template and sol-gel methods, highlighting their distinctive merits from a chemical standpoint. Furthermore, a detailed exploration of their wide-ranging applications in biosensing and biomedical therapeutics, as well as their contributions to environmental monitoring and remediation is provided. Notably, drawing inspiration from state-of-the-art techniques such as omics, a comprehensive analysis of Co-based nanozymes is undertaken, employing analogous statistical methodologies to provide valuable guidance. To conclude, a comprehensive outlook on the challenges and prospects for Co-based nanozymes is presented, spanning from microscopic physicochemical mechanisms to macroscopic clinical translational applications.

Electrochemical Sensing of Dopamine Using Polypyrrole/Molybdenum Oxide Bilayer-Modified ITO Electrode

The electrochemical sensing of biomarkers has attracted more and more attention due to the advantages of electrochemical biosensors, including their ease of use, excellent accuracy, and small analyte volumes. Thus, the electrochemical sensing of biomarkers has a potential application in early disease diagnosis diagnosis. Dopamine neurotransmitters have a vital role in the transmission of nerve impulses. Here, the fabrication of a polypyrrole/molybdenum dioxide nanoparticle (MoO3 NP)-modified ITO electrode based on a hydrothermal technique followed by electrochemical polymerization is reported. Several techniques were used to investigate the developed electrode's structure, morphology, and physical characteristics, including SEM, FTIR, EDX, N2 adsorption, and Raman spectroscopy. The results imply the formation of tiny MoO3 NPs with an average diameter of 29.01 nm. The developed electrode was used to determine low concentrations of dopamine neurotransmitters based on cyclic voltammetry and square wave voltammetry techniques. Furthermore, the developed electrode was used for monitoring dopamine in a human serum sample. The LOD for detecting dopamine by using MoO3 NPs/ITO electrodes based on the SWV technique was around 2.2 nmol L-1.

A photoluminescence sensor for in-situ monitoring of the dopamine neurotransmitters released from PC12 cells

Constructing simple, stable, fast, and sensitive neurotransmitter-based sensors is a promising tool to diagnose neurological diseases. Dopamine (DA), "a catecholamine neurotransmitter" is important in transmitting nerve impulses. Therefore, great attention is taken to monitor DA concentrations received. The challenge in developing a DA-based sensor is to enhance its stability and sensitivity. Thus, we have used o-phthalaldehyde (OPA)/2-mercapto ethanol (2ME)/mesoporous silica instated of 2ME in solution. Here we have successfully developed a fluorescence DA neurotransmitters sensor. The sensor was used for detecting a wide range of concentrations of DA (5 nM to 5 µM). Effects of pH (4.3-11.4) and temperatures (25-70 °C) on the sensor efficiency were investigated. The detection limit was 1.35 × 10^-11 mol/dm³, which is lower than the normal DA level in the central nervous system. The results indicated that using OPA/2ME/MSNPs has long-time stability over a year of its preparation. Moreover, the developed sensor showed high specificity towards DA in the presence of different interferences such as ascorbic acid or another catecholamine neurotransmitter such as γ-aminobutyric acid. Finally, the fabricated biosensor was used to monitor the DA neurotransmitter released from PC12 cells. Hence, it was successfully developed a simple and stable probe for accurate photoluminescence detection of DA neurotransmitters.

Multi-Responsive Sensor Based on Porous Hydrogen-Bonded Organic Frameworks for Selective Sensing of Ions and Dopamine Molecules

Hydrogen-bonded organic frameworks (HOFs), as an emerging porous material, have attracted increasing research interest in fluorescence sensing due to their inherent fluorescence emission units with unique physicochemical properties. Herein, based on the organic building block 3,3',5,5'-tetrakis-(4-carboxyphenyl)-1,1'-biphenyl (H₄TCBP), the porous material HOF-TCBP was successfully synthesized using hydrogen bond self-assembly in a DMF solution. The fluorescence properties of the HOF-TCBP solution showed that when the concentration was high, excimers were easily formed, the PL emission was red-shifted, and the fluorescence intensity became weaker. HOF-TCBP showed good sensitivity and selectivity to metal ions Fe³⁺, Cr³⁺, and anion Cr₂O₇^2-. In addition, HOF-TCBP can serve as a label-free fluorescent sensor material for the sensitive and selective detection of dopamine (DA). HOF-based DA sensing is actually easy, low-cost, simple to operate, and highly selective for many potential interfering substances, and it has been successfully applied to the detection of DA in biological samples with satisfactory recoveries (101.1-104.9%). To our knowledge, this is the first report of HOF materials for efficient detection of the neurotransmitter dopamine in biological fluids. In short, this work widely broadens the application of HOF materials as fluorescent sensors for the sensing of ions and biological disease markers.

New Trends in Fluorescent Nanomaterials-Based Bio/Chemical Sensors for Neurohormones Detection-A Review

The study of neurotransmitters and stress hormones allows the determination of indicators of the current stress load in the body. These species also create a proper strategy of stress protection. Nowadays, stress is a general factor that affects the population, and it may cause a wide range of serious disorders. Abnormalities in the level of neurohormones, caused by chronic psychological stress, can occur in, for instance, corporate employees, health care workers, shift workers, policemen, or firefighters. Here we present a new nanomaterials-based sensors technology development for the determination of neurohormones. We focus on fluorescent sensors/biosensors that utilize nanomaterials, such as quantum dots or carbon nanomaterials. Nanomaterials, owing to their diversity in size and shape, have been attracting increasing attention in sensing or bioimaging. They possess unique properties, such as fluorescent, electronic, or photoluminescent features. In this Review, we summarize new trends in adopting nanomaterials for applications in fluorescent sensors for neurohormone monitoring.

Gold nanostructures: synthesis, properties, and neurological applications

Recent advances in technology are expected to increase our current understanding of neuroscience. Nanotechnology and nanomaterials can alter and control neural functionality in both in vitro and in vivo experimental setups. The intersection between neuroscience and nanoscience may generate long-term neural interfaces adapted at the molecular level. Owing to their intrinsic physicochemical characteristics, gold nanostructures (GNSs) have received much attention in neuroscience, especially for combined diagnostic and therapeutic (theragnostic) purposes. GNSs have been successfully employed to stimulate and monitor neurophysiological signals. Hence, GNSs could provide a promising solution for the regeneration and recovery of neural tissue, novel neuroprotective strategies, and integrated implantable materials. This review covers the broad range of neurological applications of GNS-based materials to improve clinical diagnosis and therapy. Sub-topics include neurotoxicity, targeted delivery of therapeutics to the central nervous system (CNS), neurochemical sensing, neuromodulation, neuroimaging, neurotherapy, tissue engineering, and neural regeneration. It focuses on core concepts of GNSs in neurology, to circumvent the limitations and significant obstacles of innovative approaches in neurobiology and neurochemistry, including theragnostics. We will discuss recent advances in the use of GNSs to overcome current bottlenecks and tackle technical and conceptual challenges.

Carbon dots-decorated hydroxyapatite nanowires–lanthanide metal–organic framework composites as fluorescent sensors for the detection of dopamine

A ratiometric composite fluorescent probe (HAPNWs-CDs-Tb/MOF) with hydroxyapatite carrier and the fluorescence ratio of carbon dots and lanthanide metal organic framework as the response signal was prepared for the detection of dopamine.

Rosaniline Hydrochloride Encapsulated MCM-48: Fluorescent and Electrochemical Sensor for Dopamine

The dye Rosaniline hydrochloride (RANH) has been successfully incorporated in MCM-48 (designated as RANH@MCM-48) and characterized by various spectroscopic methods including FT-IR, SEM, EDX and N₂ adsorption-desorption isotherm. RANH@MCM-48 in aqueous medium acts as fluorescence "on" sensor for neurotransmitter dopamine (DA) in presence of its main biological interfering agent ascorbic acid or vitamin c (AA) along with Glucose, Cholesterol and Uric acid (UA). The limits of detection (LOD) were found to be 65 nM and 51 nM respectively in absence and in presence of AA. The interaction of DA to RANH@MCM-48 is found to be reversible with respect to EDTA^2-. The fluorescence intensity vs. pH plot shows a narrow fluorescence window of 7.2 to 8.8. RANH@MCM-48 has been successfully applied for DA detection in artificial cerebrospinal fluid (ACF) and bovine serum albumin (BSA) with LOD values 27 nM and 22.5 nM respectively. Platinum disc electrode has been modified with RANH@MCM-48 which showed distinct oxidation peaks with a separation of 0.188 V in cyclic voltammetry (CV). The LOD for DA in presence of AA determined from oxidation current is 77.5 nM. The voltammetric detection of DA is found to be free from common interfering species Na⁺, K⁺, Ca²⁺, Fe²⁺, UA, Cholesterol and Glucose. RANH@MCM-48 has been found to be a very effective fluorescence and voltammetric sensor for DA with very low  LOD.

Electrochemical Detection of Dopamine at Fe3O4/SPEEK Modified Electrode

Reported here is the design of an electrochemical sensor for dopamine (DA) based on a screen print carbon electrode modified with a sulphonated polyether ether ketone-iron (III) oxide composite (SPCE-Fe₃O₄/SPEEK). L. serica leaf extract was used in the synthesis of iron (III) oxide nanoparticles (Fe₃O₄NPs). Successful synthesis of Fe₃O₄NP was confirmed through characterization using Fourier transform infrared (FTIR), ultraviolet–visible light (UV–VIS), X-ray diffractometer (XRD), and scanning electron microscopy (SEM). Cyclic voltammetry (CV) was used to investigate the electrochemical behaviour of Fe₃O₄/SPEEK in 0.1 M of phosphate buffer solution (PBS) containing 5 mM of potassium ferricyanide (III) solution (K₃[Fe(CN)₆]). An increase in peak current was observed at the nanocomposite modified electrode SPCE-Fe₃O₄/SPEEK) but not SPCE and SPCE-Fe₃O₄, which could be ascribed to the presence of SPEEK. CV and square wave voltammetry (SWV) were employed in the electroxidation of dopamine (0.1 mM DA). The detection limit (LoD) of 7.1 μM and 0.005 μA/μM sensitivity was obtained for DA at the SPCE-Fe₃O₄/SPEEK electrode with concentrations ranging from 5–50 μM. LOD competes well with other electrodes reported in the literature. The developed sensor demonstrated good practical applicability for DA in a DA injection with good resultant recovery percentages and RSDs values.

Catalytical feature of optical nanoprobes of boron nitride quantum dots in the presence of Cu2+ for the determination of dopamine

Monitoring the concentration of dopamine (DA) is vital for preventing and diagnosing DA related diseases. In contrast to the traditional sensing methods for DA, in which direct or indirect effects on the optical probes are often recorded, a novel sensing concept is disclosed based on as a result of the in situ formation of polydopamine (PDA) originating from the synergetic effect between boron nitride quantum dots (BNQDs) and Cu2+. In the co-presence of BNQDs and Cu2+, DA was catalytically oxidized to PDA, accompanied by an obvious color change from colorless to brown. In contrast to previous reports, in which BNQDs have been employed as an optical probe, herein, the BNQDs not only acted as the optical energy donor, but also as the catalysts for the formation of PDA. The quenching efficiency resulting from the inner filter effect and the electron transfer between the BNQDs and PDA was directly proportional to the concentration of DA, ranging linearly from 2 to 80 μM with a limit of detection of 0.49 μM. The present system exhibited an outstanding selectivity for DA among other interfering coexisting biomolecules. Furthermore, the practical application of the proposed platform was verified by assaying DA in human plasma samples, and satisfactory recoveries ranging from 101.24% to 111.98% were obtained. With the satisfactory reliability, repeatability and stability, the proposed simple sensor showed significant potential for use in DA detection in other biomedical applications.

Microplasma-Tunable Graphene Quantum Dots for Ultrasensitive and Selective Detection of Cancer and Neurotransmitter Biomarkers

The effective and precise detection of cancer and neurotransmitter biomarkers including folic acid (FA), dopamine (DA), and epinephrine (EP) are essential for early detection and diagnosis of cancer and neurological disorders and for the development of new drugs. However, it remains challenging to detect FA, DA, and EP with high selectivity and sensitivity with a single material. Herein, we report a photoluminescence (PL)-based selective sensing of FA, DA, and EP with nitrogen-doped graphene quantum dots (NGQDs) synthesized from biocompatible chitosan under ambient conditions using atmospheric pressure microplasmas. By regulating the pH, the selective detection is achieved in broad ranges from 0.8 to 80 μM for FA and 0.4 to 100 μM for both DA and EP with the very low limits of detections of 81.7, 57.8, and 16.7 nM for FA, DA, and EP, respectively. The developed PL sensing method shows the high throughput of 5000 detections per hour. Moreover, highly stable colloidal NGQD dispersion with 100 μg/mL concentration for at least 100 PL detections is produced in 1 h by a single microplasma, and the process is scalable. The mechanisms of the outstanding performance are related to the enhanced, size-dependent π-π stacking attraction between the NGQDs and the pH-regulated chemical states of the analytes and the associated pH-specific photo-induced electron transfer and PL.

Selective dopamine detection by SPR sensor signal amplification using gold nanoparticles

In this study, selective and sensitive detection of neurotransmitter dopamine from both aqueous solution and biological samples was performed by surface plasmon resonance sensor based on molecular imprinting technique.

Rapid and sensitive colorimetric detection of dopamine based on the enhanced-oxidase mimicking activity of cerium(iv)

A fast and sensitive approach for colorimetric determination of DA based on the enhanced oxidase-like catalytic activity of Ce⁴⁺ by DA was developed.

Solid-Contact Potentiometric Sensors Based on Stimulus-Responsive Imprinted Polymers for Reversible Detection of Neutral Dopamine

Herein, we present for the first time a novel potentiometric sensor based on the stimulus-responsive molecularly imprinted polymer (MIP) as a selective receptor for neutral dopamine determination. This smart receptor can change its capabilities to recognize according to external environmental stimuli. Therefore, MIP-binding sites can be regenerated in the polymeric membrane by stimulating with stimulus after each measurement. Based on this effect, reversible detection of the analyte via potentiometric transduction can be achieved. MIPs based on 4-vinylphenylboronic acid as the functional monomer were prepared as the selective receptor. This monomer can successfully bind to dopamine via covalent binding and forming a five- or six-membered cyclic ester in a weakly alkaline aqueous solution. In acidic medium, the produced ester dissociates and regenerates new binding sites in the polymeric membrane. The proposed smart sensor exhibited fast response and good sensitivity towards dopamine with a limit of detection 0.15 µM over the linear range 0.2–10 µM. The selectivity pattern of the proposed ISEs was also evaluated and revealed an enhanced selectivity towards dopamine over several phenolic compounds. Constant-current chronopotentiometry is used for evaluating the short-term potential stability of the proposed ISEs. The obtained results confirm that the stimulus-responsive MIPs provide an attractive way towards reversible MIP-based electrochemical sensors designation.

Nanocomposites of poly(l-methionine), carbon nanotube-graphene complexes and Au nanoparticles on screen printed carbon electrodes for electrochemical analyses of dopamine and uric acid in human urine solutions

A sensitive electrochemical sensor featuring novel composites of gold and carbon nanocomplexes alongside a polymerized amino acid was developed for the determination of uric acid (UA) and dopamine (DA) concentrations in both buffer and human urine sample solutions. The sensor was fabricated by electropolymerization of l-methionine (l-Met) followed by coating of carbon nanotube-graphene complexes and electrodeposition of gold nanoparticles on a screen printed carbon electrode surface. The electrode surfaces were characterized by field emission scanning electron microscopy and energy dispersive spectroscopy, and the electrochemical properties were investigated by cyclic voltammetry and differential pulse voltammetry. Linear ranges of 0.05-3 μM and 1-35 μM with limits of detection of 0.0029 and 0.034 μM were achieved for DA and UA, respectively. In addition, the developed sensor was applied for the analysis of native UA and DA concentrations in undiluted and diluted human urine samples. The UA analysis results were compared to those obtained using high performance liquid chromatography and a fluorometric assay kit while the DA analysis results were compared to those obtained using liquid chromatography-tandem mass spectrometry.

A Sensitive Electrochemical Ascorbic Acid Sensor Using Glassy Carbon Electrode Modified by Molybdenite with Electrodeposited Methylene Blue

A non-enzymatic amperometric sensor using natural molybdenite (MLN) electrodeposited with methylene blue (MB) has been fabricated and characterized and its analytical performances were investigated for the determination of ascorbic acid (AA). The surface morphology of the electrode modified by electrodeposited MB was studied by use of the Advanced Mineral Identification and Characterization System (AMICS) and laser confocal high-temperature scanning microscope (LCSM). The poly(MB) and MLN immobilized sensor showed good stability, reproducibility, sensitivity, and selectivity. It exhibited a linear performance range from 3 to 1000 μM, with a lower detection limit of 0.083 μM (signal/noise = 3) and short response time (< 5 s). No obvious decrease in the current was observed after 20 days storage. The methodology reproducibility of this sensor was 2.6%. It showed good anti-interference ability for the potential interfering compounds. The poly(MB) film not only can enhance the electron-transfer rate but also increase the lifetime of the sensor. This study demonstrated the applicability of natural molybdenite for the fabrication of non-enzymatic electrochemical AA sensor.

Lateral flow assay using aptamer-based sensing for on-site detection of dopamine in urine

A lateral flow assay using DNA aptamer-based sensing for the detection of dopamine in urine is reported. Dopamine duplex aptamers (hybridized sensor with capture probe) are conjugated to 40-nm Au nanoparticles (AuNPs) with 20T linkers. The detection method is based on the dissociation of the duplex aptamer in the presence of dopamine, with the sensor part undergoing conformational changes and being released from the capture part. Hybridization between the complementary DNA in the test line and the conjugated AuNP-capture DNA produces a red band, whose intensity is related to the dopamine concentration. The minimum detectable concentration obtained by ImageJ analysis was <10 ng/mL (65.2 nM), while the visual limit of detection is estimated to be ~50 ng/mL (normal range of dopamine in urine of 52-480 ng/mL or 0.3-3.13 μM). No cross reactivity to other stress biomarkers in urine was confirmed. These results indicate that this robust and user-friendly point-of-care biosensor has significant potential for providing a cost-effective alternative for dopamine detection in urine.

Rapid colorimetric determination of dopamine based on the inhibition of the peroxidase mimicking activity of platinum loaded CoSn(OH)6 nanocubes

Platinum nanoparticles were loaded on CoSn(OH)6 nanocubes via a co-precipitation method. The material (NCs) is shown to be a viable peroxidase mimic that catalyzes the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by hydrogen peroxide (H₂O₂) to generate oxidized TMB (oxTMB) with absorption at 652 nm. The formation of the blue color can be observed in <30 s. Thus, a visual and colorimetric assay was worked out for H₂O₂. It has a detection limit as low as 4.4 μM and works in the 5 to 200 μM concentration range. The method was also used to detect dopamine (DA) which is found to inhibit the enzyme mimicking activity of the NCs. Hence, less blue color is formed in its presence. The respective DA assay has a linear response in the 5.0 to 60 μM concentration range and a 0.76 μM detection limit. Graphical abstractSchematic diagram of a visual colorimetric method for determination of H₂O₂ and dopamine (DA) with the aid of color change of 3,3',5,5'-tetramethylbenzidine (oxTMB), based on the peroxidase-like activity of Pt/CoSn(OH)₆ nanocubes.

A highly selective and sensitive detection of insulin with chemiluminescence biosensor based on aptamer and oligonucleotide-AuNPs functionalized nanosilica @ graphene oxide aerogel

A novel, highly selective and sensitive chemiluminescence (CL) biosensor for insulin (INS) detection was proposed based on aptamer and oligonucleotide-gold nanoparticles functionalized nanosilica @ graphene oxide aerogel. Initially, nanosilica functionalized graphene oxide aerogel (SiO₂@GOAG) was successfully prepared and the composite showed rich pore distribution, large specific surface area and good biocompatibility. Insulin aptamer (IGA3) was used as a biorecognition element and oligonucleotide functionalized gold nanoparticles (ssDNA-AuNPs) was used as CL signal amplification materials, which were functionalized on the surface of SiO₂@GOAG. The multi-functionalized composite - ssDNA-AuNPs/IGA3/SiO₂@ GOAG was obtained and used to construct the CL biosensor for insulin detection. When insulin is present in a sample, the insulin will bind to the IGA3, which will result in the release of ssDNA-AuNPs. The released ssDNA-AuNPs would catalyze the luminescence of luminol and H₂O₂. The linear range of the CL biosensor for insulin detection was 7.5 × 10^-12 to 5.0 × 10^-9 moL/L and the detection limit was 1.6 × 10^-12 moL/L (S/N = 3). The selectivity and stability of the CL biosensor were also studied and the results showed that the biosensor exhibited high selectivity and good stability due to the introduction of ssDNA-AuNPs/IGA3/SiO₂@GOAG. The CL biosensor was finally used for recombinant human insulin detection in recombinant human insulin injection and the results were satisfactory.

Facile fabrication of fluorescent Fe-doped carbon quantum dots for dopamine sensing and bioimaging application

A facile Fe-doped carbon quantum dot based fluorescent sensor for dopamine sensing and bioimaging was constructed.

A selective colorimetric strategy for probing dopamine and levodopa through the mussel-inspired enhancement of Fe3O4 catalysis

Mussel-inspired enhancement of Fe₃O₄ catalysis was discovered toward the colorimetric analysis of dopamine and/or levodopa with bis-catechol structures.

The Applications of Gold Nanoparticle-Initialed Chemiluminescence in Biomedical Detection

Chemiluminescence technique as a novel detection method has gained much attention in recent years owning to the merits of high sensitivity, wider linear ranges, and low background signal. Similarly, nanotechnology especially for gold nanoparticles has emerged as detection tools due to their unique physical and chemical properties. Recently, it has become increasingly popular to couple gold nanoparticles with chemiluminescence technique in biological agents' detection. In this review, we describe the superiority of both chemiluminescence and gold nanoparticles and conclude the different applications of gold nanoparticle-initialed chemiluminescence in biomedical detection.

Chemiluminescence of off-line and on-line gold nanoparticle-catalyzed luminol system in the presence of flavonoid

It was found that flavonoids could remarkably inhibit the chemiluminescence (CL) intensity of an off-line gold nanoparticle (AuNP)-catalyzed luminol-H₂ O₂ CL system. By contrast, flavonoids enhanced the CL intensity of an on-line AuNP-catalyzed luminol-H₂ O₂ CL system. In the off-line system, the AuNPs were prepared beforehand, whereas in the on-line system, AuNPs were produced by on-line mixing of luminol prepared in a buffer solution of NaHCO₃  - Na₂ CO₃ and HAuCl₄ with no need for the preliminary preparation of AuNPs. The on-line system had prominent advantages over the off-line system, namely a lowering of the background noise and improvements in the stability of the CL system. The results show that differences in the signal suppression effect of flavonoids on the off-line AuNP-catalyzed CL system are influenced by the combined action of a free radical scavenging effect and occupy-sites function; the latter was proved to be predominant using controlled experiments. Enhancement of the on-line system was ascribed to the presence of flavonoids promoting the on-line formation of AuNPs, which better catalyzed the luminol-H₂ O₂ CL reaction, and the enhancement activity of the six flavonoids increased with the increase in reducibility. This work broadens the scope of practical applications of an AuNP-catalyzed CL system.

Carbon nanodots prepared for dopamine and Al(3+) sensing, cellular imaging and logic gate operation

Fluorescent carbon nanodots (CNDs) were synthesized through a facile, economic and green one-step hydrothermal process. The CNDs exhibit various merits including excellent solubility, superior photostability and low toxicity. Besides, the CNDs can be used as an effective fluorescent probe for dopamine and Al(3+). What's more, this CNDs based fluorescent probe was favorably applied to the analyses of dopamine in biological fluids and Al(3+) in food samples. This CDs based sensing platform shows its potential applications in the field of biology and food analysis with extraordinary advantages such as fast and simple as well as environmental-friendly. Inspired by these results, the prepared CNDs can be utilized as logic gates at the molecular level.

Sensitive determination of norepinephrine, epinephrine, dopamine and 5-hydroxytryptamine by coupling HPLC with [Ag(HIO6 )2 ](5-) -luminol chemiluminescence detection

Based on the enhancing effects of norepinephrine (NE), epinephrine (EP), dopamine (DA) and 5-hydroxytryptamine (5-HT) on the chemiluminescence (CL) reaction between [Ag(HIO6 )2 ](5-) and luminol in alkaline solution, a high-performance liquid chromatography (HPLC) method with CL detection was explored for the sensitive determination of monoamine neurotransmitters for the first time. The UV-visible absorption spectra were recorded to study the enhancement mechanism of monoamine neurotransmitters on the CL of [Ag(HIO6 )2 ](5-) and luminol reaction. The HPLC separation of NE, EP, DA and 5-HT was achieved with isocratic elution using a mixture of aqueous 0.2% phosphoric acid and methanol (5:95, v/v) within 11.0 min. Under the optimized conditions, the detection limits of NE, EP, DA, and 5-HT were 4.8, 0.9, 1.9 and 2.3 ng/mL, respectively, corresponding to 17.6-96.0 pg for 20 μL sample injection. The recoveries of monoamine neurotransmitters in rat brain were >95.6% with the precisions expressed by RSD <5.0%. The validated HPLC-CL method was successfully applied for the quantification of NE, EP, DA and 5-HT in rat brain. This method has promising potential for some biological and clinical investigations focusing on the levels of monoamine neurotransmitters. Copyright © 2016 John Wiley & Sons, Ltd.

Unilateral horizontal semicircular canal occlusion induces serotonin increase in medial vestibular nuclei: a study using microdialysis in vivo coupled with HPLC-ECD

Unilateral single semicircular canal occlusion (USSCO) is an effective treatment for some cases of intractable vertigo. All patients suffer behavioural imbalance caused by surgery, and then recover with a resumption of vestibular function. However, the compensation mechanism has not been fully evaluated. Findings suggest that serotonin (5-HT) is released from nerve terminals, and plays a vital role in the plasticity of the central nervous system. In this study, we performed surgery of unilateral single semicircular canal occlusion (USSCO) on guinea pigs, and investigated the change of 5-HT by in vivo microdialysis of the medial vestibular nucleus (MVN) coupled with high-performance liquid chromatography and electrochemical detection (HPLC-ECD). A total of 12 guinea pigs were divided randomly into two groups, namely the USSCO group and the control group. Animals in the USSCO group underwent surgery of lateral horizontal semicircular canal occlusion, and those in the control group experienced the same operation but just to expose the horizontal semicircular canal without occlusion. Vestibular disturbance symptoms were observed in the case of the USSCO group, e.g. head tilting, and forced circular movements and spontaneous nystagmus at postoperative days 1 and 3. The basal level of 5-HT was determined to be 316.78 ± 16.62 nM. It elevated to 448.85 ± 24.56 nM at one day following occlusion (P = 0.001). The increase was completely abolished with the vestibular dysfunction recovery. The results showed that unilateral horizontal semicircular canal occlusion could increase the 5-HT level in MVN. 5-HT may play a significant role in the process of central vestibular compensation with residual vestibular function.

Fast, sensitive and selective colorimetric gold bioassay for dopamine detection

A highly sensitive and selective colorimetric biosensor for dopamine has been developed by using double molecular recognition modified Au nanoparticles.