An optical reflected device using a molecularly imprinted polymer film sensor

Molecularly imprinted polymers for sensing gaseous volatile organic compounds: opportunities and challenges

Chemical sensors that can detect volatile organic compounds (VOCs) are the subject of extensive research efforts. Among various sensing technologies, molecularly imprinted polymers (MIPs) are regarded as a highly promising option for their detection with many advantageous properties, e.g., specific binding-site for template molecules, high recognition specificity, ease of preparation, and chemical stability. This review covers recent advances in the sensing application of MIPs toward various types of VOCs (e.g., aliphatic and aromatic compounds). Particular emphasis has been placed on multiple approaches to the synthesis of MIP-based VOC sensors in association with their performance and sensing mechanisms. Current challenges and opportunities for new VOC-sensing applications are also discussed based on MIP technology.

Colorimetric Visualization Using Polymeric Core-Shell Nanoparticles: Enhanced Sensitivity for Formaldehyde Gas Sensors

Although equipment-based gas sensor systems (e.g., high-performance liquid chromatography) have been widely applied for formaldehyde gas detection, pre-treatment and expensive instrumentation are required. To overcome these disadvantages, we developed a colorimetric sensor based on polymer-based core–shell nanoparticles (PCSNPs), which are inexpensive, stable, and exhibit enhanced selectivity. Spherical and uniform poly(styrene-co-maleic anhydride) (PSMA)/polyethyleneimine (PEI) core–shell nanoparticles were prepared and then impregnated with Methyl Red (MR), Bromocresol Purple (BCP), or 4-nitrophenol (4-NP) to construct colorimetric sensors for formaldehyde gas. The intrinsic properties of these dyes were maintained when introduced into the PCSNPs. In the presence of formaldehyde, the MR, BCP, and 4-NP colorimetric sensors changed to yellow, red, and gray, respectively. The colorimetric response was maximized at a PEI/PSMA ratio of four, likely owing to the high content of amine groups. Effective formaldehyde gas detection was achieved at a relative humidity of 30% using the MR colorimetric sensor, which exhibited a large color change (92%) in 1 min. Advantageously, this stable sensor allowed sensitive and rapid naked-eye detection of low formaldehyde concentrations (0.5 ppm). Hence, this approach is promising for real-time formaldehyde gas visualization and can also be adapted to other colorimetric gas sensor systems to improve sensitivity and simplicity.

Stabilization of formaldehyde into polydimethylsiloxane composite: application to the in situ determination of illicit drugs

The Marquis test is the most frequently used spot color assay for the screening of unknown drugs such as amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, 3,4-metilenedioxymethamphetamine, and morphine. However, this test involves the use of the toxic reagent formaldehyde, as well as the manipulation of concentrated sulfuric acid. Here, we report a new format of this test that improves the sustainability and safety for the operator by immobilizing formaldehyde into a polydimetylsiloxane composite. In contact with a solution (or suspension) of the suspected sample in sulfuric acid, the dispositive delivers formaldehyde and the reaction takes place in a few seconds. Under the proposed conditions, only small amounts of the drug (μg) are necessary to produce intense changes of color. In addition, the percentage of the drug in the sample can be established by obtaining pictures of the test vials and subsequent analysis of the digitalized images. The responses were linear for amphetamine-like drugs up to a concentration of 100 mg L^-1, and the precision achieved was adequate (relative standard deviations, RSDs < 10%). The developed composites were tested for the determination of MDMA in several drug street samples, and a good correlation with the results obtained by a reference method based on liquid chromatography was found. The main advantages of the proposed approach over the traditional Marquis test format are better portability and safety for the operator at a lower cost and the possibility of using it for quantitative analysis.

Assessment of the binding performance of histamine-imprinted microspheres by frontal analysis capillary electrophoresis

Frontal analysis capillary electrophoresis was used to evaluate the binding performance of molecularly imprinted microspheres (MIM) toward its template histamine and analogs at pH 7, and compared to the high performance liquid chromatographic method. In both methods, batch binding was employed and the binding parameters were calculated from the measured concentration of unbound amine analytes and afforded comparable histamine equilibrium dissociation constants (K_d ∼ 0.4 mM). FACE was easily carried out at shorter binding equilibration time (i.e. 30 min) and without the need to separate the microspheres, circumventing laborious and, in the case of the system under study, inefficient sample filtration. It also allowed for competitive binding studies by virtue of its ability to distinctly separate intact microspheres and all tested amines which could not be resolved in HPLC. K_d 's for nonimprinted (control) microspheres (NIM) from FACE and HPLC were also comparable (∼ 0.6 mM) but at higher histamine concentrations, HPLC gave lower histamine binding. This discrepancy was attributed to inefficient filtration of the batch binding samples prior to HPLC analysis resulting in an over-estimation of the concentration of free histamine brought about by the presence of unfiltered histamine-bound microspheres.

A lanthanide complex-based molecularly imprinted luminescence probe for rapid and selective determination of λ-cyhalothrin in the environment

Molecularly imprinted polymers cladded lanthanide complexes were synthesized via precipitation polymerization.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Disposable terbium (III) salicylate complex imprinted membrane using solid phase surface fluorescence method for fast separation and detection of salicylic acid in pharmaceuticals and human urine

In this work, a simple, low cost, selective and sensitive complex imprinted membrane (CIM) for solid-phase fluorescent detection was developed with terbium (III) salicylate as complex template. Terbium-sensitized luminescence was employed for monitoring salicylic acid (SA) based on the fluorescence enhancement effect of benzoic acid derivatives on lanthanide ion Tb (III). The resulting CIM showed good fluorescent response and high selectivity towards SA with Tb as pivot in protic solvents, while demonstrating better analytical performance than the controlled membranes. The optimized adsorption time was 10 min, indicating rapid kinetics of the imprinted membrane. The linear response of CIM to SA was from 0.20 to 10mg/L with limit of detection (LOD) of 0.040 mg/L. The prepared CIM was successfully applied to the analysis of salicylic acid in pharmaceuticals and spiked human urine with recoveries of 80.6%-88.1%. The analytical results of the proposed method were in good agreement with those obtained by high performance liquid chromatography (HPLC) method, indicating that the developed membrane has acceptable practicability for fast determination of SA in real samples.

Optimization of molecularly imprinted polymer method for rapid screening of 17β-estradiol in water by fluorescence quenching

A new method was optimized for rapid screening of 17β-estradiol (E2) in water under 10 min. Molecularly imprinted polymer (MIP) particles (325 ± 25 nm) were added in a water sample at pH 5.5 and 20°C to form a suspension. Fluorescence emission from E2 nonspecifically bound onto the MIP particles was first quenched by large gold nanoparticles (43 ± 5 nm). The Stern-Volmer plot was linear, with dynamic quenching constants (K_sv) of 2.9 ×10⁴ M⁻¹. Fluorescence emission from E2 specifically bound inside the MIP particles was next quenched by small nitrite anions that easily penetrated the imprinted cavities. The Stern-Volmer plot became nonlinear, with K_sv = 2.1 × 10² M⁻¹ and static quenching constant (V) below 1.0 M⁻¹. The difference between these two emission intensities varied as the initial E2 concentration in water, generating a Scatchard calibration curve with R² > 0.97 from 0.1 to 10 ppb.

Recent advances in recognition elements of food and environmental biosensors: a review

A sensitive monitoring of contaminants in food and environment, such as chemical compounds, toxins and pathogens, is essential to assess and avoid risks for both, human and environmental health. To accomplish this, there is a high need for sensitive, robust and cost-effective biosensors that make real time and in situ monitoring possible. Due to their high sensitivity, selectivity and versatility, affinity-based biosensors are interesting for monitoring contaminants in food and environment. Antibodies have long been the most popular affinity-based recognition elements, however recently a lot of research effort has been dedicated to the development of novel recognition elements with improved characteristics, like specificity, stability and cost-efficiency. This review discusses three of these innovative affinity-based recognition elements, namely, phages, nucleic acids and molecular imprinted polymers and gives an overview of biosensors for food and environmental applications where these novel affinity-based recognition elements are applied.