Capillary electrophoresis determination of antihistamines in serum and pharmaceuticals

Green micellar factorial design optimized first derivative synchronous spectrofluorimetric method for tripelennamine and diphenhydramine determination in pharmaceutical gel

A green micellar synchronous spectrofluorimetric method was developed and validated for simultaneous determination of tripelennamine hydrochloride and diphenhydramine in bulk and combined pharmaceutical formulation. Synchronous fluorescence of tripelennamine hydrochloride and diphenhydramine was determined using Δλ = 60 nm. The first derivative of synchronous fluorescence was computed to resolve overlap in the synchronous fluorescence spectra. Tripelennamine hydrochloride was quantified at 375 nm, whereas diphenhydramine was quantified at 293 nm; each is the zero-crossing point of the other. As diphenhydramine exhibited weak native fluorescence, micelle enhancement upon incorporation of sodium dodecyl sulfate was considered. Two-level full factorial design was carried out to optimize experimental parameters. Optimum conditions involved using SDS (2% w/v) along with Teorell and Stenhagen buffer (pH 9). The method was found to be linear over the range 0.2-4.5 and 0.2-5 μg/mL for tripelennamine and diphenhydramine, respectively, with limits of detection 0.211 and 0.159 μg/mL. The method was successfully applied for simultaneous determination of tripelennamine hydrochloride and diphenhydramine in laboratory-prepared gel containing all possible excipients with mean percent recoveries ±SD 100.59 ± 0.79 and 98.99 ± 0.98 for tripelennamine hydrochloride and diphenhydramine, respectively. The proposed method was proved to be eco-friendly using different greenness assessment tools.

Microliquid/Liquid Interfacial Sensors: Biomimetic Investigation of Transmembrane Mechanisms and Real-Time Determinations of Clemastine, Cyproheptadine, Epinastine, Cetirizine, and Desloratadine

Antihistamines relieve allergic symptoms by inhibiting the action of histamine. Further understanding of antihistamine transmembrane mechanisms and optimizing the selectivity and real-time monitoring capabilities of drug sensors is necessary. In this study, a micrometer liquid/liquid (L/L) interfacial sensor has served as a biomimetic membrane to investigate the mechanism of interfacial transfer of five antihistamines, i.e., clemastine (CLE), cyproheptadine (CYP), epinastine (EPI), desloratadine (DSL), and cetirizine (CET), and realize the real-time determinations. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques have been used to uncover the electrochemical transfer behavior of the five antihistamines at the L/L interface. Additionally, finite element simulations (FEMs) have been employed to reveal the thermodynamics and kinetics of the process. Visualization of antihistamine partitioning in two phases at different pH values can be realized by ion partition diagrams (IPDs). The IPDs also reveal the transfer mechanism at the L/L interface and provide effective lipophilicity at different pH values. Real-time determinations of these antihistamines have been achieved through potentiostatic chronoamperometry (I-t), exhibiting good selectivity with the addition of nine common organic or inorganic compounds in living organisms and revealing the potential for in vivo pharmacokinetics. Besides providing a satisfactory surrogate for studying the transmembrane mechanism of antihistamines, this work also sheds light on micro- and nano L/L interfacial sensors for in vivo analysis of pharmacokinetics at a single-cell or single-organelle level.

Green micellar liquid chromatographic method for simultaneous determination of antihistaminic drugs tripelennamine hydrochloride and diphenhydramine in pharmaceutical gel

A new green micellar liquid chromatographic method has been developed and validated for the simultaneous determination of diphenhydramine (DPH) and tripelennamine hydrochloride (TRP) using a micellar mobile phase consisting of 1 mM Tween 20 in phosphate buffer pH 4:isopropanol (85:15, %v/v). The method was linear in the range of 4-150 and 5-120 μg/mL for TRP and DPH, respectively. The method was successfully applied for the simultaneous determination of DPH and TRP in a laboratory-prepared gel containing all possible excipients with mean percent recoveries ± standard deviation of 100.346 ± 1.265 and 100.754 ± 1.117 for TRP and DPH, respectively. The method was validated according to the International Conference on Harmonization guidelines. The method is confirmed to have excellent greenness.

Development and validation of a method for the analysis of hydroxyzine hydrochloride in extracellular solution used in in vitro preclinical safety studies

In the process of drug development, preclinical safety studies are to be performed that require the analysis of the compound at very low concentrations with high demands on the performance of the analytical methods. In the current study, a UPLC-MS/MS method was developed and validated to quantify hydroxyzine hydrochloride in an extracellular solution used in a hERG assay in concentrations ranging from 0.01 to 10μM (4.5ng/ml-4.5μg/ml). Chromatographic separation was achieved isocratically on an Acquity BEH C18 analytical column. The assay was validated at concentrations of 0.11-1.1ng/ml in end solution for hydroxyzine hydrochloride. Linearity was demonstrated over the range of concentrations of 0.06-0.17ng/ml and over the range of concentrations of 0.6-1.7ng/ml in end solution with the coefficient of correlation r>0.99. Accuracy of the achieved concentration, intra-run, and inter-run precision of the method were well within the acceptance criteria (being mean recovery of 80-120% and relative standard deviation ≤10.0%). The limit of quantification in extracellular solution was 0.09ng/ml. Hydroxyzine hydrochloride in extracellular solution proved to be stable when stored in the fridge at 4-8°C for at least 37 days, at room temperature for at least 16 days and at +35°C for at least 16 days. The analytical method was successfully applied in hERG assay.

Application of micellar liquid chromatography for the determination of antitumoral and antiretroviral drugs in plasma

In micellar liquid chromatography, the mobile phase is made of a surfactant and, eventually, an alcohol. This article describes several methods to measure the concentration of antitumoral and antiretroviral drugs in plasma, utilizing micellar liquid chromatography. Samples can be injected after dilution with a micellar solution and filtration, because proteins and other endogenous compounds are solubilized in micellar medium. We will discuss the following optimized parameters: dilution ratio, type of column, detection conditions and mobile phase composition. This article will also cover the validation performed following the International Conference on Harmonization guidelines and the results reported in the literature, indicating that the methods are useful for the routine analysis of plasma samples for clinical purposes.

Simultaneous determination of loratadine, desloratadine and cetirizine by capillary zone electrophoresis

PURPOSE

The aim of the study was the development of a simple and rapid analytical procedure for the determination of the most frequently used antihistamine derivatives.

METHODS

A capillary zone electrophoretic method was developed for the simultaneous separation of loratadine, desloratadine and cetirizine. Efforts were focused primarly on the optimisation of the experimental parameters: buffer composition and concentration, buffer pH, applied voltage, temperature, injection pressure and time.

RESULTS

The optimised parameters for the separation were: 25 mM buffer electrolyte, buffer pH 2.5, voltage + 25 kV, temperature 25 °C, injection pressure 50 mbar, injection time 3 seconds, capillary 48 cm (effective length 40 cm) x 50 μm, detection at 240 nm. Under these conditions, the analysis time was below 5 minutes, the order of migration being: desloratadine, cetirizine and loratadine. The developed method was validated in terms of linearity, limits of detection and quantification, intra- and inter-day precision, selectivity and robustness.

CONCLUSION

Capillary zone electrophoresis proved to be a suitable method for the simulatneous determination of the three studied antihistamine derivatives.

pH-dependent complexation of histamine H1 receptor antagonists and human serum albumin studied by UV resonance Raman spectroscopy

UV resonance Raman spectroscopy was used to characterize the binding of three first-generation histamine H(1) receptor antagonists-tripelennamine (TRP), mepyramine (MEP), and brompheniramine (BPA)-to human serum albumin (HSA) at pH 7.2 and pH 9.0. Binding constants differ at these pH values, which can be ascribed to the different extent of protonation of the ethylamino side chain of the ligands. We have recently shown [Tardioli et al. J. Raman Spectrosc. 2011, 42, 1016-1024] that for the solution conformation of TRP and MEP the side chain plays an important role by allowing an internal hydrogen bond with the aminopyridine nitrogen in TRP and MEP. Results presented in this paper suggest that the existence of such molecular structures has serious biological significance on the binding affinity of those ligands to HSA. At pH 7.2, only the stretched conformers of protonated TRP and MEP bind in HSA binding site I. Using UV absorption data, we derived binding constants for the neutral and protonated forms of TRP to HSA. The neutral species seems to be conjugated to a positive group of the protein, affecting both the tryptophan W214 and some of the tyrosine (Y) vibrations. BPA, for which the structure with an intramolecular hydrogen bonded side chain is not possible, is H bound to the indole ring nitrogen of W214, of which the side chain rotates over a certain angle to accommodate the drug in site I. We propose that the protonated BPA is also bound in site I, where the Y150 residue stabilizes the presence of this compound in the binding pocket. No spectroscopic evidence was found for conformational changes of the protein affecting the spectroscopic properties of W and Y in this pH range.