Confirmatory method for the determination of streptomycin in apples by LC–MS/MS

Green synthesis of silver nanoparticles from Manilkara zapota leaf extract for the detection of aminoglycoside antibiotics and other applications

Antibiotics of aminoglycoside (AMG) class, such as streptomycin (STR), have been widely used to treat infectious diseases caused by Gram-negative bacteria in livestock and humans. In this study, a selective and sensitive colorimetric probe for the determination of STR was proposed based on eco-friendly green synthesized AgNPs from the leaf extract of Manilkara zapota. The mechanism for the detection of STR is based on the electrostatic interaction of opposite charges between negatively charged silver nanoparticle-Manilkara zapota leaf (AgNP-MZL) and STR, causing an aggregation-induced characteristic shift of the SPR band (from 390 nm to 570 nm wavelength) of AgNP-MZL. The morphology, size distribution and optical properties of AgNP-MZL were characterized using UV/visible absorption spectroscopy, FTIR spectroscopy, XRD, DLS, zeta-potential measurements and TEM. The selective determination of STR was experimentally confirmed by performing controlled testing with other classes of antibiotics. To test the sensitivity level of this method, the ratio of these two A 390/A 570 absorbance wavelengths was selected to provide a linear concentration plot between 5 and 100 ng mL-1 STR. The LOD and LOQ were calculated to be 3.5 ng mL-1 and 26.8 ng mL-1, respectively. Good precision was evaluated with a standard deviation of 0.45 ng mL-1 and a relative standard deviation of 2.0% (intraday) and 2.42% (interday) at 10 ng mL-1 for 3 replicate measurements. Advantages of the green synthesis of AgNP-MZL include its eco-friendly nature and it is easy, efficient, cost effective and selective for the detection of the AMG class of antibiotics, i.e. STR, in agricultural and environmental samples.

Hollow cage-like PtCu nanozyme-regulated photo-activity of porous CdIn2S4/SnO2 heterojunctions for ultrasensitive PEC sensing of streptomycin

Streptomycin (STR) is extensively employed for preventive and curative purposes in animals, which is accumulated in human body through food chain and induces serious health problems. Herein, highly photoactive type II heterojunctions of porous CdIn₂S₄/SnO₂ microspheres were initially prepared, which can effectively inhibit the recombination of the charge-hole pairs. Besides, the peroxidase-mimicking catalytic property of the hollow PtCu nanocages (PtCu NCs) was carefully investigated by UV-vis spectroscopy, where catalytic oxidation of tetramethylbenzidine behaved as the benchmarked reaction. On such basis, a highly selective photoelectrochemical (PEC) aptasensor was established with the CdIn₂S₄/SnO₂ heterojunctions for bioanalysis of streptomycin, coupled by the PtCu NCs nanozyme-catalyzed biocatalytic precipitation to achieve signal magnification. Specifically, the home-made nanozyme was applied for catalytic oxidation of 3,3'-diaminobenzidine to generate insulating precipitate in aqueous H₂O₂ system and thereby block the light harvesting on the photoanode, showing steeply declined PEC responses. The as-built aptasensor showed a broad linear range of 0.01-200 nM with a low limit of detection of 7.50 pM (S/N = 3) for such analysis, combined by exploring its practical detection in milk samples. This work shows excellent nanozyme-catalyzed signal amplification for fabrication of ultrasensitive PEC biosensors towards other antibiotics detection.

Liquid Chromatography-Tandem Mass Spectrometry Analysis of Aminoglycosides in Foods Using an Ethylene-Bridged Hybrid Zwitterionic Stationary Phase and Hydrophilic-Lipophilic-Balanced Solid-Phase Extraction Cartridges

This work aimed to develop an analytical method for the screening of multiple aminoglycoside residues in foods of animal origin using an ethylene-bridged hybrid (BEH) particle-based sulfoalkylbetaine stationary phase. The effects of chromatographic conditions on the separation of 17 aminoglycosides have been systematically investigated. Sample preparation and mass spectrometry detection have also been investigated and optimized. In contrast to high buffer concentrations in the mobile phase required for silica-based sulfoalkylbetaine stationary phases, a moderate buffer concentration (20 mM) provided the optimal separation of 17 aminoglycosides with the BEH sulfoalkylbetaine stationary phase. The developed method has been evaluated in milk, beef, pork, liver, and honey samples with good performance for retention, selectivity, sensitivity, linearity, precision, and accuracy. The majority of the limit of quantitation estimated with the matrix was less than 25 μg/kg. The overall accuracy across five matrices was in the range from 96 to 111%, with standard deviations of less than 19%.

Comparative application of derivative spectrophotometric and HPLC techniques for the simultaneous determination of lamivudine and tenofovir disoproxil fumarate in fixed-dose combined drugs

Background

Lamivudine (LAM) and tenofovir disoproxil fumarate (TDF) are part of a fixed-dose combination (FDC) therapy recommended by WHO. Both drugs exhibit similar solubility in many solvent systems and tend to have overlapping spectra with maxima at 260 and 270 nm, respectively, in the UV spectrum—thus making their spectrophotometric assay difficult in FDCs. A third-order derivative (D3, d3A/dλ3) spectrophotometric technique was applied to simultaneously evaluate TDF and LAM in FDC drugs, with amplitudes at 240 and 262.5 nm, respectively. Pharmacopoeia-recommended chromatographic method was also applied for comparative purpose.

Results

Method performance by the proposed D3 technique showed linearity for LAM and TDF from 2–10 µg mL−1 to 8–24 µg mL−1, respectively (R2 ≥ 0.998), while for HPLC method both drugs ranged from 0.25 to 5.0 µg mL−1 (R2 ≥ 0.999). The intercepts and slopes of the regression equations were ≤ 1.62 × 10−4 and ≤ 3.58 × 10−5, respectively, while calculated standard errors were ≤ 8.04 × 10−5. Limits of detection and quantification for both methods were ≤ 0.46 μg mL−1 and ≤ 1.40 μg mL−1, respectively, for LAM, while corresponding limits for TDF were ≤ 2.61 and ≤ 7.90 μg mL−1. The percentage recovery for both drugs and methods ranged from 94.80 to 100.33%. The amount of LAM and TDF in brands I and II was ≥ 99.59 ± 1.19% and ≥ 99.39 ± 0.63%, respectively, for the proposed D3 spectroscopic method, while corresponding values for the HPLC method were ≥ 99.86 ± 0.50 and ≥ 99.87 ± 0.32%. Statistically, both methods were adjudged to have no significant difference at 95% confidence level as the student’s t-test values; experimental paired t- and F-test values were found satisfactory.

Conclusion

The D3 spectrophotometric technique was time saving, cheap, simple and more environmental friendly and shows reliability, precision and accuracy and could be used for routine analysis of FDCs where HPLC is not available.

Graphical abstract

Facile fabrication and luminescence properties of a new ZnII coordination polymer-based fluorescent sensor toward antibiotics

A new ZnII-based coordination polymer could selectively and sensitively recognize NFT and DCN via turn-off effect. Interestingly, a mixed matrix film for visualizable sensing has been successfully developed.

Residue Dynamics of Streptomycin in Citrus Delivered by Foliar Spray and Trunk Injection and Effect on 'Candidatus Liberibacter asiaticus' Titer

Streptomycin (STR) has been used to control citrus huanglongbing (HLB) caused by 'Candidatus Liberibacter asiaticus' (CLas) via foliar spray. Here, we studied the residue dynamics of STR and its effect on CLas titers in planta applied by foliar spray and trunk injection of 3-year-old citrus trees that were naturally infected by CLas in the field. After foliar spray, STR levels in leaves peaked at 2 to 7 days postapplication (dpa) and gradually declined thereafter. The STR spray did not significantly affect CLas titers in leaves of treated plants as determined by quantitative PCR. After trunk injection, peak levels of STR were observed 7 to 14 dpa in the leaf and root tissues, and near-peak levels were sustained for another 14 days before significantly declining. At 12 months after injection, moderate to low or undetectable levels of STR were observed in the leaf, root, and fruit, depending on the doses of STR injected, with a residue level of 0.28 µg/g in harvested fruit at the highest injection concentration of 2.0 µg/tree. CLas titers in leaves were significantly reduced by trunk injection of STR at 1.0 or 2.0 g/tree, starting from 7 dpa and throughout the experimental period. The reduction of CLas titers was positively correlated with STR residue levels in leaves. The in planta minimum effective concentration of STR needed to suppress the CLas titer to an undetectable level (cycle threshold ≥36.0) was 1.92 µg/g fresh weight. Determination of the in planta minimum effective concentration of STR against CLas and its spatiotemporal residue levels in planta provides the guidance to use STR for HLB management.

Fabrication of an ultrasensitive aptasensor for precise electrochemical detection of the trace amounts of streptomycin in milk

Designing a sensitive method for the detection of streptomycin residues in animal products is essential for controlling consumer health risk. In this study, a high-purity pencil lead graphite electrode coated with inner graphene layers and outer surface-adsorbed gold nanoparticles attached to streptomycin-specific thiolated aptamer was used as an electrochemical aptasensor. The aptasensor electrode fabrication steps were investigated by scanning electron microscope (SEM) and Fourier-transform infrared spectrophotometer (FTIR). Moreover, aptasensor performance during fabrication and binding of aptamer to streptomycin were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) methods. After the binding of sreptomycin to it's specific aptamer as a component of the aptasensor a decrease in the current and an increase in the charge transfer resistance (R_ct) were recorded using the above-mentioned techniques. Under optimal conditions, the novel ultra-sensetive designed aptansensor detects streptomycin in the range of  10^-8 to  10^-16 M with a LOD of 0.8×10^-18 M. The aptansensor demonstrates a high selectivity, good reproducibility and acceptable stability for the specific detection of streptomycin. According to the results, the manufactured aptansensor is a fast, low-cost, highly sensitive and selective device and thus the aptasensor can detect the trace amounts of streptomycin in milk in dairy industries.

An excellent water-stable 3D Zn-MOF with 8-fold interpenetrated diamondoid topology showing “turn-on/turn-off” luminescent detection of Al3+ and SNT in aqueous media

An excellent water-stable 3D Zn-MOF with 8-fold interpenetrated diamondoid topology acts as a bi-responsive chemical sensor for “turn-on” and “turn-off” luminescent detection of Al3+ and SNT in aqueous media, respectively.

Determination of antibiotic impurities in good manufacturing practices-grade cell therapy medicinal products

Backrounds: According to the regulations of the health autorities, cell-based therapy products must be manufactured in good manufacturing production (GMP) facilities, fulfilling the required GMP standards. Products developed under the high quality control (QC) necessarity need to be approved for some QC tests. One of the main residual test is antibiotic test and this test should be validated. The aim of this study is to validate and determine the methods of detection of the antibiotic residue in the final product.Methods: Liquid Chromatography Tandem-Mass Spectrometry (LC-MS/MS) methods were used for the main steps of the production procedure, as well as the final products. Pharmaceutical Grade penicillin G and streptomycin sulfate were used as positive controls.Results: The results suggest that penicillin is broken down during cell culture and streptomycin is eliminated at the first washing step of the final product manufacture. It is shown in this study that LC-MS/MS method is one of the convenient method to test residual anibiotics and can be used to detect the antibiotic residues in cellular therapy products.Discussion: Since the antibiotic residues are eliminated in the final product and also it could be suggested that the methodology we followed is sufficiently safe and final product is pure.

Spectroscopic Fingerprinting of Aminoglycosides and Determination of Neomycin Sulphate Through Oxidative Ion-pair Complex Formation using Ammonium Molybdate

Background:

Aminoglycosides are non-chromophoric antibiotics. The official method of assay in pharmacopoeias is microbiological. Bioassay methods are potency-semi-quantitative, laborious and time-consuming. In contrast, spectrophotometric methods are rapid, convenient, specific, sensitive and selective. The presence of NH2 and -OH functional groups in aminoglycosides makes them susceptible to redox reaction.

Objective:

A simple, cheap, quick, accurate and reliable spectrophotometric method for aminoglycoside analysis using neomycin as prototype via oxidation by ammonium molybdate reagent is proposed.

Methods:

Four aminoglycosides - amikacin, gentamicin, neomycin and streptomycin, were oxidized using ammonium molybdate (pH<2). These were scanned to obtain visible-spectrophotometric fingerprints. Two assay methods were developed. Method I involved the determination of the drug via the linear proportionality between neomycin and residual molybdate measured at 780nm and 850nm. Method II, an indirect determination using ion-pair reaction of excess molybdate and methyl orange measured at 430nm and 480nm.

Results:

All aminoglycosides formed blue complex, with distinct spectra peaks at 500nm, 640nm, 780nm and 850nm.The limit of detection and limit of quantification were from 0.33 to 2.32 μgmL-1 and 1.00 to 7.03 μgm L-1 respectively for both methods. Percentage recoveries ranged from 89.60 and 113.05 %, while precision and accuracy as RSD ranged from 0.23 to 3.55%. The regression coefficient (R2) ranged from 0.9968 to 0.9995. Percentage neomycin in dosage forms ranged from 95.67- 104.16% and 96.04 - 99.46% for methods I and II, respectively.

Conclusion:

The methods were successfully applied for neomycin sulphate determination in tablets and drops, therefore aminoglycosides could be assayed via the proposed methods.

Kinetic field dissipation and fate of endosulfan after application on Theobroma cacao farm in tropical Southwestern Nigeria

Endosulfan, 6,7,8,9,10,10-hexachloro-1,5,5a,6,9,9a-hexahydro-6,9-methano,2,4,3-benzodioxathiepin-3-oxide, is still a pesticide of choice for most cocoa farmers in Southwestern Nigeria, in spite of its persistence, bioaccumulative, toxicological properties, and restriction. A single treatment of 1.4 kg ai/ha (0.5% ai) of technical grade endosulfan (Thiodan, 35EC) was applied to 0.0227 ha of cultivated Theobroma cacao L. (Cocoa) farm at the Cocoa Research Institute of Nigeria (CRIN). Levels of parent endosulfan (α-, β-endosulfan) and major metabolite (endosulfan sulfate) were determined in vegetation and surrounding matrices at days 0, 7, 14, 21, 28, 42, and 60 using GC-MS. Their kinetic variables were determined. Order of ∑endosulfan distribution at day 0 was dry foliage > fresh foliage > bark > pods > soil (0-15 cm). No residual endosulfan was found in cocoa seeds and subsurface soil (15-30 cm). Low residual levels in pods on day 0 may be due to endogenous enzymatic breakdown, with α-isomer more susceptible and α/β-endosulfan ratio being 0.90. Fell dry foliage as mulch was predominantly the receiving matrix for non-target endosulfan sprayed. Volatilization was key in endosulfan dissipation between days 0 and 7 from foliage surfaces (> 60% loss), while dissipation trend was bi-phasic and tri-phasic for vegetation and soil, respectively. ∑endosulfan loss at terminal day ranged between 40.60% (topsoil) and 99.47% (fresh foliage). Iteratively computed half-lives (DT'₅₀) ranged from 6.48 to 30.13 days for ∑endosulfan in vegetation. Endosulfan was moderately persistent in pods-a potential source for cross contamination of seeds during harvest. Iteratively determined DT'₅₀ and initial-final day DT₅₀ are highly correlated (R = 0.9525; n = 28) and no significant difference (P = 0.05) for both methods.

A regular “signal attenuation” electrochemical aptasensor for highly sensitive detection of streptomycin

A novel aptasensor based on PCNRs and MWCNTs–CuO–AuNPs as the nanomatrix was constructed for the highly sensitive detection of streptomycin.

Study of the post separation pH adjustment by a microchip for the analysis of aminoglycoside antibiotics

A simple microfluidic technique was developed with the ability to adjust the pH after separation for the electrochemical detection of aminoglycoside antibiotics.

Highly sensitive spectrofluorimetric method for determination of certain aminoglycosides in pharmaceutical formulations and human plasma

A simple, reliable, highly sensitive and selective spectrofluorimetric method has been developed for determination of certain aminoglycosides namely amikacin sulfate, tobramycin, neomycin sulfate, gentamicin sulfate, kanamycin sulfate and streptomycin sulfate. The method is based on the formation of a charge transfer complexes between these drugs and safranin in buffer solution of pH 8. The formed complexes were quantitatively extracted with chloroform under the optimized experimental conditions. These complexes showed an excitation maxima at 519-524 nm and emission maxima at 545-570 nm. The calibration plots were constructed over the range of 4-60 pg mL(-1) for amikacin, 4-50 pg mL(-1) for gentamicin, neomycin and kanamycin, 4-40 pg mL(-1) for streptomycin and 5-50 pg mL(-1) for tobramycin. The proposed method was successfully applied to the analysis of the cited drugs in dosage forms. The proposed method was validated according to ICH and USP guidelines with respect to specificity, linearity, accuracy, precision and robustness. The high sensitivity of the proposed method allowed determination of amikacin and gentamicin in spiked and real human plasma.

Hydrophilic interaction chromatography in drug analysis

Hydrophilic interaction chromatography (HILIC) is an increasingly popular alternative to conventional HPLC for drug analysis. It offers increased selectivity and sensitivity, and improved efficiency when quantifying drugs and related compounds in complex matrices such as biological and environmental samples, pharmaceutical formulations, food, and animal feed. In this review we summarize HILIC methods recently developed for drug analysis (2006–2011). In addition, a list of important applications is provided, including experimental conditions and a brief summary of results. The references provide a comprehensive overview of current HILIC applications in drug analysis.