Fluoroimmunoassay based on suppression of fluorescence self-quenching for ultra-sensitive detection of herbicide diuron

Pesticide biosensors: trends and progresses

Pesticides, chemical substances extensively employed in agriculture to optimize crop yields, pose potential risks to human and environmental health. Consequently, regulatory frameworks are in place to restrict pesticide residue concentrations in water intended for human consumption. These regulations are implemented to safeguard consumer safety and mitigate any adverse effects on the environment and public health. Although gas chromatography- and liquid chromatography-mass spectrometry (GC-MS and LC-MS) are highly efficient techniques for pesticide quantification, their use is not suitable for real-time monitoring due to the need for sophisticated laboratory pretreatment of samples prior to analysis. Since they would enable analyte detection with selectivity and sensitivity without sample pretreatment, biosensors appear as a promising alternative. These consist of a bioreceptor allowing for specific recognition of the target and of a detection platform, which translates the biological interaction into a measurable signal. As early detection systems remain urgently needed to promptly alert and act in case of pollution, we review here the biosensors described in the literature for pesticide detection to advance their development for use in the field.

Smartphone-assisted detection of monocrotophos pesticide using a portable nano-enabled chromagrid-lightbox system towards point-of-care application

With the aim of monocrotophos pesticides detection in environmental and food samples at point-of-care (PoC) application, this research, for the first time, explores silica alcogel as an immobilization matrix to support the development of in-house customized nano-enabled "chromagrid-lighbox" as a sensing system. This system is fabricated using laboratory waste materials and demonstrates the detection of highly hazardous monocrotophos pesticide using a smartphone. Nano-enabled chromagrid is a chip-like assembly filled with silica alcogel -a nanomaterial (hence the name "nano-enabled" chromagrid), and "chromogenic reagents" which is required for the enzymatic detection of monocrotophos. Lightbox is the imaging station fabricated to provide constant lighting conditions to the chromagrid to capture accurate colorimetric data. The silica alcogel used in this system was synthesized from Tetraethyl orthosilicate (TEOS) via a sol-gel method and characterized using advanced analytical techniques. Further, three chromagrid assays were developed for the optical detection of monocrotophos with a low detection limit (LOD) at 0.421 ng ml^-1 (by α-NAc chromagrid assay), 0.493 ng ml^-1 (by DTNB chromagrid assay) and 0.811 ng ml^-1 (by IDA chromagrid assay). The developed novel PoC chromagrid-lightbox system is capable of on-site detection of monocrotophos in environmental as well as food samples. This system is able to be manufacture prudently using recyclable waste plastic. Overall, such developed eco-friendly PoC testing system will surely manage rapid detection of monocrotophos pesticide needed for environmental and sustainable agricultural management.

Nano-assembly of multiwalled carbon nanotubes for sensitive voltammetric responses for the determination of residual levels of endosulfan

Endosulfan (ES) is an extensively utilized agricultural pesticide in developing countries, despite its life-threatening toxic effects. In this study, we propose a sensitive detection method against endosulfan using multiwalled carbon nanotubes (MWCNT). Herein, we have conjugated endosulfan with bovine serum albumin (BSA) via zero-length conjugation method and successfully confirmed with various biophysical techniques. Endosulfan antibodies (ES-Ab) were raised in-house, fabricated on electrodes coupled with MWCNT, and optimized to achieve maximum peak current by varying the parameters such as MWCNT and antibody concentration, scan rate, temperature, pH, and response time using voltammetry. Cyclic voltammetry (CV), differential pulse voltammetry (DPV), and impedance spectroscopies (IS) were performed for electrochemical analysis. The fabricated immunosensor was also evaluated for its cross reactivity with isodrin, chlorpyrifos, and monocrotophos. The limit of detection for ES was found to be 0.184 ppt in standard buffer (range 0.001 ppt-100 ppb). Additionally, spiked ES in water, animal feed, root, and leaf extract samples were also analyzed and validated by HPLC. To summarize, the fabricated electrode can be used for successful detection of endosulfan in the agricultural sector to elude the lethal effect at large.

Sensitive Carbon Fiber Microelectrode for the Quantification of Diuron in Quality Control of a Commercialized Formulation

Nickel(II) tetrasulfonated phthalocyanine (p-NiTSPc)-modified carbon fiber microelectrode (CFME) was used for the first time to investigate the electrochemical quantification of diuron in an agrochemical formulation. The surface morphology and elementary analysis of unmodified carbon fiber microelectrode (CFME) and p-NiTSPc-CFME were performed using atomic force microscopy (AFM) and energy dispersive X-ray spectroscopy (EDX), respectively. Cyclic voltammetry (CV) was used to investigate the electrochemical behaviour of diuron, while square wave voltammetry (SWV) was used for quantitative analysis of diuron. Upon variation of some key analytical parameters, a calibration curve was plotted in the concentration range from 21.450 to 150.150 μM, leading to a detection limit (DL) of 8.030 μM mg/L (3.3σ/m) and a limit of quantification (LQ) of 20.647 μM mg/L. The fabricated p-NiTSPc-CFME was successfully applied for quality control in a commercialized formulation of diuron. The standard additional method was used, and the recovery rate of diuron was found to be 98.4%.

Graphene nanosheets as an electric mediator for ultrafast sensing of urokinase plasminogen activator receptor-A biomarker of cancer

Fluorine doped tin oxide (FTO) electrochemical immunosensor has been developed for rapid detection of urokinase type plasminogen activator receptor (uPAR) - a biomarker for cancer. uPAR is a GPI-anchored cell membrane receptor that shows increased expression in many types of human cancers which include breast, prostate, colorectal, and non-small cell lung cancer. In this study, a novel ultrasensitive FTO graphene nanosheets based electrode was used as a working probe to analyze the interaction between urokinase plasminogen activator (uPA) and monoclonal uPAR antibody (Ab). Graphene nanosheets (GNS) exhibited high conductivity, thereby increasing the sensitivity of the immunochemical assay. GNS were coupled with uPAR-Ab via carbodiimide activation chemistry with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC)/N-hydroxysuccinimide (NHS) as a heterobifunctional crosslinker. The confirmation of immobilization events was done by biophysical methods such as UV-Vis spectroscopy, fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), atomic force microscopy (AFM), differential pulse (DPV), and cyclic voltammetry (CV). The immobilization conditions were optimized in accordance with the best sensor response. Under optimum conditions, the proposed sensor displayed wide linear detection range (1 fM to 1 μM) with a detection limit of 4.8 fM in standard. The developed sensor was profitably engaged to detect uPA in spiked serum samples up to 9.2 pM. Furthermore, the developed uPAR immunosensor showed good reproducibility, repeatability, and storage stability (75% of initial activity observed up to 4 weeks). FTO/GNS/uPAR-Ab/uPA-Ag immunosensor displayed acceptable performance for detection of uPA and exhibited low detection limit with high reproducibility. The proposed immunosensor is 'easy to use', highly specific, and can be used as a quantitative tool making it a tenable alternate for the detection of uPAR in cancer patients.

A smart nanosensor for the detection of human immunodeficiency virus and associated cardiovascular and arthritis diseases using functionalized graphene-based transistors

Human immunodeficiency virus (HIV), which isa worldwide public health issue, is commonly associated with cardiovascular disorders (CVDs) and rheumatoid arthritis (RA). A smart nanosensor was developed for the detection of HIV and its related diseases (CVDs and RA) using graphene-based field-effect transistors (FETs). In this study, amine-functionalized graphene (afG) was conjugated with antibodies [anti-p24 for HIV, anti-cardiac troponin 1 (anti-cTn1) for CVDs, and anti-cyclic citrullinated peptide (anti-CCP) for RA] to detect various biomarkers. The antibodies were covalently conjugated to afG via carbodiimide activation. The bioconjugate (graphene-antibody) was characterized by various biophysical techniques such as UV-Vis, Raman spectroscopy, scanning electron microscopy (SEM), and atomic force microscopy (AFM). The electrochemical performance of the sensor was evaluated with respect to changes in the resistance of the electrode surface due to the interaction of the antigen with its specific antibody. The developed sensor was highly sensitive and showed a linear response to p24, cTn1, and, CCP from 1 fg/mL to 1 μg/mL. The limit of detection (LOD) was 100 fg/mL for p24 and 10 fg/mL for cTn1 and CCP under standard optimized conditions. The graphene-based smart nanodevice demonstrated excellent performance; thus, it could be used for the on-site detection of HIV, CVD, and RA biomarkers in real samples.

Ultrasensitive quantitative detection of small molecules with rapid lateral-flow assay based on high-affinity bifunctional ligand and magnetic nanolabels

An ultrasensitive lateral-flow assay is developed for rapid quantitative detection of small molecules on-site. The conceptual novelty, which transfers lateral-flow assays to the category of highly sensitive quantitative systems, is due to employment of a bifunctional ligand combined with volumetric registration of magnetic nanolabels. The ligand provides extremely high affinity for trapping the nanolabels and, simultaneously, efficiently competes with the analyzed molecules for the limited quantity of antigen-binding sites on the nanolabels. The developed assay has been demonstrated as the first express method for measuring in human serum of free thyroxine (fT4). The limit of detection is 20 fМ or 16 fg/ml at the assay time <30 min with the dynamic range of 3 orders. Besides, we present the results of first characterization of kinetic parameters of interaction between free thyroxine and monoclonal antibody, as well as of competitive relationship between fT4 and fT4-biotin. The proposed universal platform can be used for ultrasensitive detection of small molecules in human in vitro diagnostics, veterinary, biosafety and counter-terrorism, food quality control, environmental monitoring, etc., as well as for search of new, previously undetectable, diagnostic markers in medicine.

Development of Hybrid IgG-Aptamer Sandwich Immunoassay Platform for Aflatoxin B1 Detection and Its Evaluation Onto Various Field Samples

The present study was aimed to develop a novel antibody-aptamer based hybrid detection strategy for specific and sensitive detection of aflatoxin B1 (AFB1) from contaminated food grains. The study comprises generation of ssDNA aptamers and anti-AFB1 IgG against AFB1 toxin. The generated bio-probes (aptamers and antibodies) were further characterized for their specificity and sensitivity using indirect ELISA. The generated aptamers namely AFB1a and AFB1b showed prominent reactivity and selectivity against AFB1 toxin. These aptamers were further characterized for their secondary structures and dG values were determined as -4.6 and -2.75 Kcal/mol, respectively. The detection limit (LOD) of AFB1a and anti-AFB1 IgG was determined as 5 and 10 ng/mL, respectively. The characterized aptamers and antibodies against AFB1 were used to develop the sandwich immunoassay. Anti AFB1 IgG was used as a capturing antibody whereas anti-AFB1a aptamer was used as its revealing partner in the assay. The limit of detection (LOD) of the immunoassay was determined to be 5 ng/mL of AFB1 standard toxin and showed no cross-reactivity with closely related mycotoxins. To assess the reliability of the developed method, several field samples contaminated with aflatoxin B1 was included in the study and results were validated with commercial AFB1-ELISA Kit. Additionally, the spiking studies were also carried out to demonstrate the consistency and dependability of the developed hybrid sandwich immunoassay wherein the toxins recovered were found to be ranging between 73 and 98.80% with the LOD at 5 ng/mL. In conclusion, the developed method may find the better utility in routine food testing laboratories for assessment of AFB1.

Ultrasensitive electrochemical immuno-sensing platform based on gold nanoparticles triggering chlorpyrifos detection in fruits and vegetables

Chlorpyrifos (chl) is an organophosphate pesticide extensively used in agriculture and highly toxic for human health. Fluorine doped tin-oxide (FTO) based electrochemical nanosensor was developed for chlorpyrifos detection with gold nanoparticles (AuNPs) and anti-chlorpyrifos antibodies (chl-Ab). AuNPs provides high electrical conductivity and specific resistivity, thus increases the sensitivity of immunoassay. High electrical conductivity of AuNPs reveals that it promotes the redox reaction for better cyclic voltammetry. Based on the intrinsic conductive properties of FTO-AuNPs complex, chl-Ab was immobilized onto AuNPs surface. Under optimized conditions, the proposed FTO based nanosensor exhibited high sensitivity and stable response for the detection of chlorpyrifos, ranging from 1fM to 1µM with limit of detection (LOD) up to 10fM. The FTO-AuNPs sensor was successfully employed for the detection of chlorpyrifos in standard as well in real samples up to 10nM for apple and cabbage, 50nM for pomegranate. The proposed FTO-AuNPs nanosensor can be used as a quantitative tool for rapid, on-site detection of chlorpyrifos traces in real samples when miniaturized due to its excellent stability, sensitivity, and simplicity.

An immunochromatographic dipstick as an alternate for monitoring of heroin metabolites in urine samples

Pathway of heroin degradation post oral administration in mice.

Prospects of electrochemical immunosensors for early diagnosis of preeclampsia

Preeclampsia is a vascular multisystem disorder that accounts for varying degree of morbidity and mortality of mother and the fetus. This can be significantly averted if diagnosed at an early (18-20 weeks) stage of gestation, as there is no known way to prevent preeclampsia. In spite of extensive work on biomarker discovery, the existing method for its detection is mostly based on colorimetric immunoassays whose sensitivity is ranging in nanomolar range. Further, it has also been observed that change in the expression of a single biomarker is not sufficient to diagnose this condition. So, for early diagnosis (by 18-20 weeks), an immuno-diagnostic platform with detection limits in picomolar range and beyond along with the ability to do simultaneous detection of multiple analyte would be of great importance. A nano-immunosensors with an electrochemical readout system can be a potential alternative that promises for the ultrasensitive detection of analyte with high specificity as well as suitability for on-site analysis. Coupling the lateral flow technology with immunosensors would make it feasible to detect more than one biomarker simultaneously on a microchip. This review intends to summarize the potential preeclampsia biomarkers, limitations of existing diagnostic methods along with the recent advancements, and prospects to develop electrochemical immunosensors for early clinical diagnosis.

Development of a Highly Specific Fluorescence Immunoassay for Detection of Diisobutyl Phthalate in Edible Oil Samples

The diisobutyl phthalate (DiBP) hapten containing an amino group was synthesized successfully, and the polyclonal antibody against 4-amino phthalate-bovine serum albumin (BSA) was developed. On the basis of the polyclonal antibody, a rapid and sensitive indirect competitive fluorescence immunoassay (icFIA) has been established to detect DiBP in edible oil samples for the first time. Under the optimized conditions, the quantitative working range of the icFIA was from 10.47 to 357.06 ng/mL (R(2) = 0.991), exhibiting a detection limit of 5.82 ng/mL. In this assay, the specific results showed that other similar phthalates did not significantly interfere with the analysis, with the cross-reactivity less than 1.5%, except for that of DiBAP. Thereafter, DiBP contamination in edible oil samples was detected by icFIA, with the recovery being from 79 to 103%. Furthermore, the reliability of icFIA was validated by gas chromatography-mass spectrometry (GC-MS). Therefore, the developed icFIA is suitable for monitoring DiBP in some edible oil samples.

Star-shaped poly(l-lactide)-b-poly(ethylene glycol) with porphyrin core: synthesis, self-assembly, drug-release behavior and singlet oxygen research

pH-induced block copolymer SPPLA-b-PEG with porphyrin core for photodynamic therapy.

Characterization of Hapten-Protein Conjugates: Antibody Generation and Immunoassay Development for Pesticides Monitoring

The generation of specific and sensitive antibodies against small molecules is greatly dependent upon the characteristics of the hapten–protein conjugates. In the present study, we report a new fluorescence-based method for the characterization of hapten–protein conjugates. The method is based on an effect promoted by hapten–protein conjugation density upon the fluorescence intensity of the intrinsic tryptophan chromophore molecules of the protein. The proposed methodology is applied to quantify the hapten–protein conjugation density of two different class of pesticides (atrazine and 2,4-dichlorophenoxyacetic acid in this study) coupled to carrier protein. The study proved useful for monitoring the course of hapten–protein conjugation for the production of specific antibodies against small molecules. Well-characterized hapten–protein conjugates enabled obtaining highly sensitive anti-atrazine and anti-2,4-D antibodies with IC₅₀ values equal to 12 and 70 ng mL⁻¹ for atrazine and 2,4-D respectively. These antibodies were used for developing a fluorescence-based immunoassays format demonstrating a detection limit of atrazine and 2,4-D in standard water samples 2 and 7 ng mL⁻¹, respectively. The developed immunoassay format could be used as convenient quantitative tools for sensitive and specific screening of pesticides in samples.

Nanobiosensors based on chemically modified AFM probes: a useful tool for metsulfuron-methyl detection

The use of agrochemicals has increased considerably in recent years, and consequently, there has been increased exposure of ecosystems and human populations to these highly toxic compounds. The study and development of methodologies to detect these substances with greater sensitivity has become extremely relevant. This article describes, for the first time, the use of atomic force spectroscopy (AFS) in the detection of enzyme-inhibiting herbicides. A nanobiosensor based on an atomic force microscopy (AFM) tip functionalised with the acetolactate synthase (ALS) enzyme was developed and characterised. The herbicide metsulfuron-methyl, an ALS inhibitor, was successfully detected through the acquisition of force curves using this biosensor. The adhesion force values were considerably higher when the biosensor was used. An increase of ~250% was achieved relative to the adhesion force using an unfunctionalised AFM tip. This considerable increase was the result of a specific interaction between the enzyme and the herbicide, which was primarily responsible for the efficiency of the nanobiosensor. These results indicate that this methodology is promising for the detection of herbicides, pesticides, and other environmental contaminants.

Bio-functionalized graphene-graphene oxide nanocomposite based electrochemical immunosensing

We report a novel in-situ electrochemical synthesis approach for the formation of functionalized graphene-graphene oxide (fG-GO) nanocomposite on screen-printed electrodes (SPE). Electrochemically controlled nanocomposite film formation was studied by transmission electron microscopy (TEM) and Raman spectroscopy. Further insight into the nanocomposite has been accomplished by the Fourier transformed infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA) and X-ray diffraction (XRD) spectroscopy. Configured as a highly responsive screen-printed immunosensor, the fG-GO nanocomposite on SPE exhibits electrical and chemical synergies of the nano-hybrid functional construct by combining good electronic properties of functionalized graphene (fG) and the facile chemical functionality of graphene oxide (GO) for compatible bio-interface development using specific anti-diuron antibody. The enhanced electrical properties of nanocomposite biofilm demonstrated a significant increase in electrochemical signal response in a competitive inhibition immunoassay format for diuron detection, promising its potential applicability for ultra-sensitive detection of range of target analytes.

Biotransformation and biomonitoring of phenylurea herbicide diuron

A Gram-positive, Micrococcus sp. strain PS-1 isolated from diuron storage site was studied for its capability of biotransformation of phenylurea herbicide diuron to a secondary metabolite, 1-(3,4-dichlorophenyl)urea (DCPU) for bioconjugation and antibody development applications. The metabolite formed associated with profound changes in bacterial cell morphology demonstrated increase in the degradation kinetics of diuron in presence of small quantity of a surfactant. The synthesized metabolite identified by chromatographic and mass spectrometry techniques was conjugated with carrier protein, and used as an immunogen for antibodies production. The generated antibody was highly specific, demonstrating excellent sensitivity against diuron. The antibody was used as receptor molecules in standard fluorescence immunoassay (FIA) format showing detection limit of 0.01 ng/mL in the optimum working concentration range of diuron with good signal precision (∼2%). The study presented first time the degradation pathway of herbicide by specific microorganism to synthesize hapten for bioconjugation and immunoassay development.