Dual lifetime referenced fluorometry for the determination of doxorubicin in urine

Development of a biophotonic fiber sensor using direct-taper and anti-taper techniques with seven-core and four-core fiber for the detection of doxorubicin in cancer treatment

Doxorubicin (DOX) is an important drug for cancer treatment, but its clinical application is limited due to its toxicity and side effects. Therefore, detecting the concentration of DOX during treatment is crucial for enhancing efficacy and reducing side effects. In this study, the authors developed a biophotonic fiber sensor based on localized surface plasmon resonance (LSPR) with the multimode fiber (MMF)-four core fiber (FCF)-seven core fiber (SCF)-MMF-based direct-taper and anti-taper structures for the specific detection of DOX. Compared to other detection methods, it has the advantages of high sensitivity, low cost, and strong anti-interference ability. In this experiment, multi-walled carbon nanotubes (MWCNTs), cerium-oxide nanorods (CeO2-NRs), and gold nanoparticles (AuNPs) were immobilized on the probe surface to enhance the sensor's biocompatibility. MWCNTs and CeO2-NRs provided more binding sites for the fixation of AuNPs. By immobilizing AuNPs on the surface, the LSPR was stimulated by the evanescent field to detect DOX. The sensor surface was functionalized with DOX aptamers for specific detection, enhancing its specificity. The experiments demonstrated that within a linear detection range of 0-10 µM, the sensitivity of the sensor is 0.77 nm/µM, and the limit of detection (LoD) is 0.42 µM. Additionally, the probe's repeatability, reproducibility, stability, and selectivity were evaluated, indicating that the probe has high potential for detecting DOX during cancer treatment.

N-Doped Graphene Quantum Dots Confined within Silica Nanochannels for Enhanced Electrochemical Detection of Doxorubicin

Herein, we describe a fast and highly sensitive electrochemical sensor for doxorubicin (DOX) detection based on the indium tin oxide (ITO) modified with a binary material consisting of vertically-ordered mesoporous silica films (VMSFs) and N-doped graphene quantum dots (NGQDs). VMSFs, with high permeability and efficient molecular transport capacity, is attached to the ITO electrode via a rapid and controllable electrochemical method, which can serve as a solid template for the confinement of numerous NGQDs through facile electrophoresis. By virtue of the excellent charge transfer capacity, π-π and electrostatic preconcentration effects of NGQDs, as well as the electrostatic enrichment ability of VMSF, the presented NGQDs@VMSF/ITO shows amplified electrochemical signal towards DOX with a positive charge, resulting in good analytical performance in terms of a wide linear range (5 nM~0.1 μM and 0.1~1 μM), high sensitivity (30.4 μA μM-1), and a low limit of detection (0.5 nM). Moreover, due to the molecular sieving property of VMSF, the developed NGQDs@VMSF/ITO sensor has good selectivity and works well in human serum and urine samples, with recoveries of 97.0~109%, thus providing a simple and reliable method for the direct electrochemical analysis of DOX without complex sample pretreatment procedures.

Reduced Graphene Oxide and Gold Nanoparticles-Modified Electrochemical Aptasensor for Highly Sensitive Detection of Doxorubicin

Doxorubicin (DOX) is the most clinically important antibiotic in cancer treatment, but its severe cardiotoxicity and other side effects limit its clinical use. Therefore, monitoring DOX concentrations during therapy is essential to improve efficacy and reduce adverse effects. Here, we fabricated a sensitive electrochemical aptasensor for DOX detection. The sensor used gold wire as the working electrode and was modified with reduced graphene oxide (rGO)/gold nanoparticles (AuNPs) to improve the sensitivity. An aptamer was used as the recognition element for the DOX. The 5' end of the aptamer was modified with a thiol group, and thus immobilized to the AuNPs, and the 3' end was modified with methylene blue, which acts as the electron mediator. The combination between the aptamer and DOX would produce a binding-induced conformation, which changes the electron transfer rate, yielding a current change that correlates with the concentration of DOX. The aptasensor exhibited good linearity in the DOX concentration range of 0.3 μM to 6 μM, with a detection limit of 0.1 μM. In addition, the aptasensor was used for DOX detection in real samples and results, and showed good recovery. The proposed electrochemical aptasensor will provide a sensitive, fast, simple, and reliable new platform for detecting DOX.

Flow Cytometry Detection of Anthracycline-Treated Breast Cancer Cells: An Optimized Protocol

The use of anthracycline derivatives was approved for the treatment of a broad spectrum of human tumors (i.e., breast cancer). The need to test these drugs on cancer models has pushed the basic research to apply many types of in vitro assays, and, among them, the study of anthracycline-induced apoptosis was mainly based on the application of flow cytometry protocols. However, the chemical structure of anthracycline derivatives gives them a strong autofluorescence effect that must be considered when flow cytometry is used. Unfortunately, the guidelines on the analysis of anthracycline effects through flow cytometry are lacking. Therefore, in this study, we optimized the flow cytometry detection of doxorubicin and epirubicin-treated breast cancer cells. Their autofluorescence was assessed both by using conventional and imaging flow cytometry; we found that all the channels excited by the 488 nm laser were affected. Anthracycline-induced apoptosis was then measured via flow cytometry using the optimized setting. Consequently, we established a set of recommendations that enable the development of optimized flow cytometry settings when the in vitro assays of anthracycline effects are analyzed, with the final aim to reveal a new perspective on the use of those in vitro tests for the further implementation of precision medicine strategies in cancer.

A Fluorescence Study of the Interaction of Anticancer Drug Molecule Doxorubicin Hydrochloride in Pluronic P123 and F127 Micelles

Drug delivery systems for the sustained and target delivery of doxorubicin to tumor cells are a topic of interest due to the efficacy of the doxorubicin in cancer treatment. The use of polymers such as Pluronic is being studied widely for the formulation of doxorubicin hydrochloride. However, the basic understanding of the physicochemical properties of pluronic micelles in presence of doxorubicin hydrochloride is a very essential topic of study. Doxorubicin hydrochloride is fluorescent; this helped us to study its sensitivity towards the Pluronic microenvironment using the fluorescence technique. In this work, the interaction and place of location of doxorubicin hydrochloride in Pluronic F127 and P123 micelles has been studied extensively using steady-state fluorescence intensity, dynamic fluorescence lifetime, quenching studies, dynamic light scattering, and zeta potential measurements, at different Pluronic concentrations. Using a fluorescence quenching experiment, doxorubicin hydrochloride was found to reside near the hydrophilic PEO corona region of the Pluronic micelles. For both the Pluronic, in the concentration range of study, the micellar size was found to be below 30 nm; this may have a greater advantage for various applications.

Self-Referenced Multifrequency Phase-Resolved Luminescence Spectroscopy

Phase-resolved luminescence chemical sensors provide the analyte determination based on the estimation of the luminescence lifetime. The lifetime is estimated from an analysis of the amplitudes and/or phases of the excitation and emission signals at one or several modulation frequencies. This requires recording both the excitation signal (used to modulate the light source) and the emission signal (obtained from an optical transducer illuminated by the luminescent sensing phase). The excitation signal is conventionally used as reference, in order to obtain the modulation factor (the ratio between the emission and the excitation amplitudes) and/or the phase shift (the difference between the emission and the excitation phases) at each modulation frequency, which are used to estimate the luminescence lifetime. In this manuscript, we propose a new method providing the luminescence lifetimes (based either on amplitudes or phases) using only the emission signal (i.e., omitting the excitation signal in the procedure). We demonstrate that the luminescence lifetime can be derived from the emission signal when it contains at least two harmonics, because in this case the amplitude and phase of one of the harmonics can be used as reference. We present the theoretical formulation as well as an example of application to an oxygen measuring system. The proposed self-referenced lifetime estimation provides two practical advantages for luminescence chemical sensors. On one hand, it simplifies the instrument architecture, since only one analog-to-digital converter (for the emission signal) is necessary. On the other hand, the self-referenced estimation of the lifetime improves the robustness against degradation of the sensing phase or variations in the optical coupling, which reduces the recalibration requirements when the lifetimes are based on amplitudes.

An eco-friendly stability-indicating spectrofluorimetric method for the determination of two anticancer stereoisomer drugs in their pharmaceutical preparations following micellar enhancement: Application to kinetic degradation studies

A new rapid and highly sensitive stability-indicating spectrofluorimetric method was developed for the determination of two stereoisomers anticancer drugs, doxorubicin (DOX) and epirubicin (EPI) in pure form and in pharmaceutical preparations. The fluorescence spectral behavior of DOX and EPI in a sodium dodecyl sulfate (SDS) micellar system was investigated. It was found that the fluorescence intensity of DOX and EPI in an aqueous solution of phosphate buffer pH4.0 and in the presence of SDS was greatly (about two fold) enhanced and the mechanism of fluorescence enhancement effect of SDS on DOX was also investigated. The fluorescence intensity of DOX or EPI was measured at 553nm after excitation at 497nm. The plots of fluorescence intensity versus concentration were rectilinear over a range of 0.03-2μg/mL for both DOX and EPI with good correlation coefficient (r>0.999). High sensitivity to DOX and EPI was attained using the proposed method with limits of detection of 10 and 9ng/mL and limits of quantitation of 29 and 28ng/mL, for DOX and EPI, respectively. The method was successfully applied for the determination of DOX and EPI in biological fluids and in their commercial pharmaceutical preparations and the results were concordant with those obtained using a previously reported method. The application of the proposed method was extended to stability studies of DOX following different forced degradation conditions (acidic, alkaline, oxidative and photolytic) according to ICH guidelines. Moreover, the kinetics of the alkaline and oxidative degradation of DOX was investigated and the apparent first-order rate constants and half-life times were calculated.

A microfluidic platform with pH imaging for chemical and hydrodynamic stimulation of intact oral biofilms

A microfluidic platform with a fluorescent nanoparticle-based sensor is demonstrated for real-time, ratiometric pH imaging of biofilms. Sensing is accomplished by a thin patterned layer of covalently bonded Ag@SiO2+FiTC nanoparticles on an embedded planar glass substrate. The system is designed to be sensitive, responsive and give sufficient spatial resolution to enable new micro-scale studies of the dynamic response of oral biofilms to well-controlled chemical and hydrodynamic stimulation. Performance under challenging operational conditions is demonstrated, which include long-duration exposure to sheer stresses, photoexcitation and pH sensor biofouling. After comprehensive validation, the device was used to monitor pH changes at the attachment surface of a biofilm of the oral bacteria, Streptococcus salivarius. By controlling flow and chemical concentration conditions in the microchannel, biochemical and mass transport contributions to the Stephan curve could be probed individually. This opens the way for the analysis of separate contributions to dental caries due to localized acidification directly at the biofilm tooth interface.

Solid phase extraction of doxorubicin using molecularly imprinted polymer coated magnetite nanospheres prior to its spectrofluorometric determination

Selective doxorubicin-imprinted polymer coated magnetite nanospheres were synthesized.

Quantification of doxorubicin in biofluids using white light excitation fluorescence

A fiber optic spectrometer setup was designed for white light excitation fluorescence 'WLEF' based measurements. Using this setup, two different analytical methods, a self referencing ratio-metric and a difference WLEF methods, were developed for the quantification of doxorubicin (DXR) in biofluids. It was seen that Acetonitrile (ACN) acts as an efficient and transparent extracting medium for DXR. The figures of merit and the percent recoveries of DXR in blood serum, even in presence of external fluorophores and in urine samples are comparable with existing analytical methods. The compact spectrometer is expected to be useful for easy quantification of fluorescent pharmaceuticals in biofluids.

Ag@4ATP-coated liposomes: SERS traceable delivery vehicles for living cells

A liposome-Ag nanohybrid has been demonstrated as a SERS traceable intracellular drug nanocarrier. Liposomes have been introduced for their special qualities in drug delivery systems. In essence, 4-aminothiophenol (4ATP) tagged Ag nanoparticles (Ag@4ATP) were adsorbed onto the surfaces of liposomes via electrostatic interactions, in which 4ATP was used as a SERS reporter. In such a nanohybrid, the locations of the carrier can be tracked by SERS signals while those of the drugs can be monitored through their fluorescence, allowing the simultaneous investigation of the intracellular distribution of both the carriers and the drugs. Our experimental results suggest that the reported liposomal system has substantial potential for intracellular drug delivery.

Photon upconverting nanoparticles for luminescent sensing of temperature

Photon upconverting nanoparticles convert near-infrared into visible light (anti-Stokes emission), which strongly reduces the background of autofluorescence and light scattering in biological materials. Hexagonal NaYF(4) nanocrystals doped with Yb(3+) as the sensitizer and Er(3+)/Ho(3+)/Tm(3+) as the activator display at least two emission lines that respond differently to temperature changes. The ratio of the main emission line intensities enables a self-referenced optical readout of the temperature in the physiologically relevant range from 20 to 45 °C. Upconverting nanoparticles of the type NaYF(4):Yb, Er covered by an inactive shell of NaYF(4) are bright and allow for resolving temperature differences of less than 0.5 °C in the physiological range. The optical readout of this nanoparticle-based thermometer offers many options for imaging the two-dimensional distribution of temperature.